Commit Graph
546 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 29d307bdcd doc: a modelled thread through SMLib cuts the exact groove
On SOLIDCRAFT_KERNEL=smlib the thread's groove (the ISO 68-1 trapezoid, as before) is a B-rep
screw sweep (kernel::sweep_helix, SMLib's screw sweep) cut from the body by the B-rep boolean,
whose history carries the threaded face's names on. Truck keeps the faceted groove and the
faceted boolean. thread_groove_shape holds what both build from; the size checks before it
(a hole or shaft off the thread's size is refused with the size to use) are unchanged, so
neither kernel fits a thread to a face that is too large or too small.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 7f1e85f71c naming: make the reference lookups a rebuild uses public
The corpus naming test (next commit) records what every stored face and
edge name resolves to, and must find it exactly as a rebuild does. Three
lookups were crate-private: `locate_face_on_body` (a feature's face
points, tried on the body the feature names first), `blend_target` (the
body a fillet or chamfer rounds) and `Document::anchored_face_indices`
(the faces a face-attached sketch is on). Visibility only; no behaviour
changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:44 -04:00
jyvikoandClaude Opus 5.5 5a9bd4398d brep: history types move to solidcraft_geom::brep::history
FaceOrigin, Change, FaceProv, Side, EdgeOrigin, EdgeProv and History move
unchanged (fields, serde derives) to solidcraft-geom, so a backend can
report history without depending on solidcraft-kernel. The pure methods
(composition, renumbering, count checks, mark_shared_split) move with
them and return brep::history::Failed, which converts to
KernelError::Failed with the same "history: …" message.

What needs a kernel body (History::identity, check, face_sources) stays
in the kernel as the BodyHistory trait; solidcraft_kernel::history
re-exports the types, so existing paths keep working.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:44 -04:00
Jackson OurslandandClaude Opus 5.5 3ad5a360f2 Engine: keep the model and placed world across appearance-only edits (#7396)
Evaluation and placement never read appearances, yet an appearance edit
re-evaluated the model and placed every occurrence again. A whole-document
proof that only appearances changed now takes the existing render-only refresh,
which keeps the model and retargets the world-placement cache.

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-27 03:40:29 +00:00
Jackson OurslandandClaude Opus 5.5 4e07b6c4b7 Assembly: name placed bodies without rescanning the design (#7380)
Naming a placed body scanned every occurrence and body of the design, so the
world state and every caller naming all placed bodies grew with bodies times
design size. WorldNames indexes the design once and names each body in time
proportional to its occurrence path; one naming routine serves both it and the
single-body scan. Names are unchanged (a test compares them with the scanning
implementation).

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-27 03:30:33 +00:00
Homero ThompsonandClaude Opus 5.5 622a392a83 Extrude to Object: a Join extrude also joins the target body (#6424) (#6471)
* claim: #6424

* fix: a join extrude also joins the body it targets (#6424)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 00:53:25 +00:00
N3MI-DGandClaude Opus 5.5 e8eb7ee11a Components: copy and paste bodies and components between designs and components (#3390) (#3390)
Squashed for the rebase onto main.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 00:33:57 +00:00
HiroKenEzandClaude Opus 5.5 56bcd872cb Cone primitive: solid.cone with base and top radius (#5641) (#6250)
* claim: #5641

* Cone primitive: solid.cone with base and top radius (#5641)

A cone or truncated cone placed like the cylinder: base centre, axis,
base radius (or diameter), top radius (0, the default, is a full cone)
and height, with the new body / join / cut / intersect choice. It is
built from what the kernel already exposes, a revolve of its half
section about +Z through the origin, moved into place. Toolbar entry
after Torus, a Cone dialog that also places it on a picked face, Edit
Feature, a timeline icon, pending UI strings and attribution, and one
pending design-format change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 23:57:43 +00:00
DuBearteandClaude Opus 5.5 f077f48318 Sketch: a changed length dimension keeps its start point, so a side grows from its first corner (#6070) (#6139)
* claim: #6070

* Sketch: a changed length dimension keeps its start point, so a side grows from its first corner (#6070)

Changing a dimension's value re-solved its sketch as the smallest move from
the stored positions, which splits the change between both ends: a
rectangle side set from 40 to 60 mm grew 10 mm each way. parameters.change
now first solves a sketch whose length dimension (distance, horizontal or
vertical distance, line length) the parameter drives with that
dimension's first point held, and stores the result, so evaluation has
nothing left to move. Where holding it can't solve (a symmetry moves both
ends), evaluation solves as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 23:03:31 +00:00
Dahak BuildsandDahak Builds bd44f6f496 Reference features by id everywhere: Pattern/Mirror seeds and construction planes (#1134) (#6858)
* claim: #1134

* doc: key pattern/mirror seeds and construction planes by feature id (#1134)

* engine: resolve seed names the way evaluation did; keep timeline.edit name input (#1134)

* fmt/clippy cleanups (#1134)

* ui: resolve construction-plane names by feature id in plane_description (#1134)

* fmt: sketch_attachment_ui after rebase adaptation

* engine: timeline.add resolves legacy name-keyed seeds and plane names (#1134)

* chore: re-trigger CI (GPU runner timeout flake)

* doc: replayed_sources walks id-keyed pattern seeds (rebase adaptation)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 22:56:06 +00:00
bherbruckandClaude Opus 5.5 0b2d3ecd44 Release 0.24.0: version bump, design format 39 (#7394)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 19:23:19 -04:00
CamWightandClaude Opus 5.5 64ba396c05 Part properties: one table of keys (#4784) (#4786)
* claim: #4784

* Part properties: one table of keys, each with its scope, check and label (#4784)

SolidCraft's part-property keys (project, part number, revision, author,
organization, description, licence) were declared once but listed again
by hand in each command, error, dialog and window. They are now one
table, metadata::KEYS: each row has the key, where it may be set
(Scope: the design, a component or both), how its value is checked and
the message id of its label. A new key is one row.

Metadata::set is told whose metadata it changes (Owner::Design or
Owner::Component), and a key is taken where its scope covers that
owner. is_well_known, both set commands, document.metadata,
component.metadata, the refusals, the Design Properties dialog and the
Bill of Materials window read the table; the hand-written lists are
gone (WELL_KNOWN, the label match whose fallback named any unknown key
"License", the window's three labels). metadata::BOM_KEYS names, in
column order, the keys a bill of materials lists for each part:
component.metadata returns them, component.metadata.set takes each as a
parameter of its own and the window edits them; a test keeps each one a
row of the table that a component takes. Free properties use the keys'
text rule (metadata::check_text) instead of a copy of it. The params
docs point to document.metadata's properties instead of repeating the
keys.

Every key accepted before still is, on the design and on a component.
Two things change:
- a refused key or a full metadata on a component says "part property"
  ("`bogus` is not a part property: …", "part properties are limited
  to …"), not "design property";
- changing the design's own properties no longer evaluates the model.
  The fields that change no geometry are named once,
  Document::with_part_properties_of: the design's metadata, and each
  component's metadata and free properties. It compares them first and
  copies the design only when one differs, as before.

The shortcut is for a session's own edits only. A command that gives
the session another design (doc.open, file.new, doc.recover: through
Session::replace_design, which now counts them) is refreshed in full,
however little the new design differs from the one before, so its
joints are solved and its occurrence state pruned. Before, opening a
design that differed from the open one only in render settings or
component properties skipped that; with the design's properties in the
list it would have for two revisions of one part too.

Tests: the table (one row per key, the dialog's order); the bill of
materials' keys (rows a component takes, in column order); each scope
on each owner, and refusals that name the owner (the empty key, an
unknown key, a 256-byte key shown cut); the text check at 4096 bytes,
line breaks, tabs and control characters; hostile keys and values
refused without a change; only-part-property changes in each scope,
and changes beside them (units, a component's name, an added, removed
or swapped component); document.metadata.set, remove, undo and redo
evaluate nothing; opening a revision that differs only in its author
solves its joint; the component wording, the shortcuts and the limits;
the dialog's and the window's labels from the table.

What the tests can't reach: every row is Scope::Both, so a known key
refused for its owner (the wrong-owner branch of check) can't happen
yet. It becomes live with the first single-scope row, bom_type, a
component-only key.

Left for later (not this topic):
- Metadata::others() ignores scope, so a component-only key stored on
  the design would be neither a dialog field nor listed under other
  tools' data. It matters from the first single-scope key (bom_type).
- assembly.bom's rows, its CSV columns and the window's grid headers
  still name the three keys by hand; the bill of materials module's
  rewrite will read BOM_KEYS.
- The bill of materials types (P1, #5107, into drawings) still use
  WELL_KNOWN and the two-argument set: once this is on main, bom_type
  is rebuilt on it as one KEYS row with Scope::Component, set through
  Owner::Component.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 20:03:22 +00:00
Dahak BuildsandRayGalt 2863b80574 Sketch: 3D arc command (#5681) (#5682)
* claim: #5681

* sketch: exact circular arcs on drawn 3D wires (#5681)

Add WireArc (centre, unit normal, radius, start/end) as an optional analytic
form on drawn 3D sketch wires, with arc_from_3_points, arc_sweep and
sagitta-bounded arc_polyline; add_drawn_arc_in stores the arc, its three
defining fit points and its samples; move_drawn_point re-derives the arc
atomically and refuses collinear points; validate_wires checks saved arcs.

* engine,ui: sketch.arc3d exact 3D arc command (#5681)

sketch.arc3d draws an exact circular arc through three world points in a 3D
sketch, stored analytically beside its fit points and samples; sketch.move3d
rebuilds it, sketch.inspect reports centre/radius/sweep; placement mapping
(map_wire, now shared with the engine's world state) transforms the arc.
One pending design-format file records the new field. The viewport's 3-Point
Arc tool draws a 3D arc when clicked off the sketch plane, with a live arc
preview; the SKETCH panel offers sketch.arc3d.

* ui,engine: 3D Arc button starts an interactive tool (#5681)

sketch.arc3d now maps to a Draw(3) tool handled by sketch3d: three world clicks (start, end, through - same order as the 2D arc tool) run the command, with the live arc preview and snapping. The command is only enabled while a 3D sketch is open, so the toolbar never offers a tool that could only fail. Locale labels for the command.

* ui: cargo fmt

---------

Co-authored-by: RayGalt <RayGalt@pm.me>
2026-10-26 16:29:39 +00:00
amolinari-autotex 47285ccb88 Thread: right- and left-handed direction (#4414) (#4415)
* claim: #4414

* feat: persist right and left thread handedness (#4414)

* fix(thread): verify handedness with referenced holes and complete locales

* test: verify handedness with merged tapped thread catalogues

* test: retain tapped thread depth when changing handedness (#4414)

* test: restrict Unix symlink coverage to Unix targets

* test: inspect hole thread depth inside edit command parameters (#4414)

* test(doc): initialize cylinder radius in handedness fixture
2026-10-26 13:57:08 +00:00
amolinari-autotex 13cd45d1f1 Apply complete feature transactions off the window thread (#3133) (#3135)
* claim: #3133

* Apply complete feature transactions off the window thread

Evaluate dependent history and prepare reference and GPU display caches before accepting a guarded result. Preserve the evaluated original model for safe editor cancellation and journal only accepted commands.

* fix(ui): preserve original marker across sketch-to-feature edits

* test(ui): verify edit-sketch cleanup and guard Unix link fixture

* test(ui): fix texture disposal and unreachable assertion in feature tests

* fix(build): compile CLI link inspection only on Unix
2026-10-26 13:27:04 +00:00
Steven WatersandClaude Sonnet 5.5 2755c9ccfb Pin auto-generated body names (#6402) (#6403)
* Pin auto-generated body names

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Fixed body counter

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Fixed formatting

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Altered test behaviour to reflect new pinned body names

Co-authored-by: Claude <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-26 12:33:58 +00:00
froglemonade2andClaude Opus 5.5 e063a7778e Axes and points from circular edges and round faces (#3128) (#4610)
* Axes and points from circular edges and round faces

In 3D, a round edge or face stands for its circle wherever a command
takes an axis or a point.

Revolve, Surface Revolve, both Circular Pattern dialogs, Plane at Angle
and Move -> Rotate take a circular edge (through its centre, along its
normal) or a cylinder, cone or torus face (its axis). The features keep
the pick as a model reference, so they follow the model when a parameter
moves it. Straight edges work as before; flat faces are refused.

Every 3D point input takes a circle's centre: construction points (which
follow the circle), To Object, patch points, hole placement, and Move's
pivot and points. Hovering shows the axis as a dashed construction line
or the centre as a star, and the dialog's chip names what the pick
stands for ("centre of edge 10", "axis of face 3").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Format the round-pick hover check

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Selection chips: name a round pick as a circle centre or axis

The chip has room for little more than the body and a word or two:
"Shaft · circle centre", "Shaft · circle axis", "Shaft · face 2 axis",
and "Shaft · point" for a point of the model.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move: a circle's centre in a placed component is where the component shows it

Move's pivot and points read a picked circle from the model in its
component's own frame, while the pick is in the world. They now read it
from the world state (and, editing a Move, from the state before it,
placed the same way), as the viewport and the other round picks do.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Plane at Angle on a planar face about a model edge: test that it follows both

Upstream #1956 made a planar face a base for Plane at Angle; this branch makes a model edge an
axis. The rebase keeps both in one PlaneRef::AtAngle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 12:27:32 +00:00
ivisafandClaude Opus 5.5 3bcf77ee32 Expressions: a number and its unit are one value (10 mm / 2 mm is 5) (#6331)
* Expressions: a number and its unit are one value (10 mm / 2 mm is 5)

A unit written after a number was multiplied in at the precedence of `*` and
`/`, so `10 mm / 2 mm` was (10 mm / 2) mm = 5 mm² and `90 deg / 1 rad` a value
in angle², reported as a unit error. The number now takes the unit after it
before `*` and `/` apply; a fraction of numbers before a unit stays one value
(`1/2 in` is half an inch), and an exponent stays a plain number (`2^3 mm`).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Expressions: after a division, a fraction before a unit only when closed up

`width / 10 / 2 mm` read the `10 / 2 mm` as the fraction 5 mm and gave
width / (5 mm) = 8 instead of (width / 10) / 2 mm = 2. After a `/` the
fraction rule now needs the fraction written without spaces (`1 in / 1/2 in`
is still 2); elsewhere `1/2 in` and `10 / 2 mm` are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 12:24:34 +00:00
semmelrindeandClaude Opus 5.5 4d06daf87b Patterns: one before the feature it copies follows that feature's parameters (#6726) (#6727)
* Patterns: one before the feature it copies follows that feature's parameters (#6726)

A pattern or mirror of features made with the timeline rolled back comes
before its sources and replays them from their definitions. Its
fingerprint chained only the features before it and its own inputs, so a
change of a source's parameter left its result in place: the box grew,
its copy kept the old length, also after rolling forward.

The chain fingerprint of a pattern or mirror of features now also takes
the fingerprint of each feature it replays (and of their sources, for a
pattern of a pattern), wherever they are in the timeline.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Patterns: a test for a later feature taking a deleted source's name (#6726)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Patterns: fingerprint the replayed sources with the document, as fingerprint now takes it (#6726)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 12:01:58 +00:00
Christopher KochandFramewrk CI e6fb3793dc design: a whole-boundaries loop loads in any curve order (#6499) (#6516)
* claim: #6499

* Design: a whole-boundaries loop loads in any curve order (#6499)

---------

Co-authored-by: Framewrk CI <ci@framewrklabs.ai>
2026-10-26 11:29:00 +00:00
leValdemar19andClaude Opus 5.5 82cd5cc52e Sketch Dimension: value box in the document's units (#3812) (#3878)
* claim: #3812

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Dimension: value box in the design's units (#3812)

A dimension added without a value restated what it measured as
"<value> mm", whatever the design's units. In an inch design the
Dimension tool's value box therefore opened at "25.4 mm" next to a
dimension whose text read 1.000 (inches).

Document::design_length writes a measured length in the design's units
("1 in"), with enough decimals to keep it to the micrometre, so a
dimension that restates the geometry still moves nothing. The Dimension
tool, AutoConstrain's dimensions and Toggle Driven (making a driven
dimension driving) use it. Millimetre designs are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Move the design-units dimension tests into sketch_ux_tests (review)

The #3812 tests go in the existing sketch dimension test file rather than
a new file of their own (AGENTS.md, #3226).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:16:12 +00:00
Colin Faulkingham cd66495e14 Preserve plastic rules and hidden bodies through renames (#4421) (#4425)
* claim: #4421

* Fix body metadata and visibility across renames (#4421)
2026-10-26 11:15:31 +00:00
SS-ENandClaude Opus 5.5 daecea6edf Evaluation cache: charge each state only for the bodies it made, so setting a parameter back restores (#6897)
The evaluation cache's 64 MB budget charged every cached feature result the whole model, though a
state shares every body it did not change with the state before it. A design whose model is a few
MB kept only its last few dozen results, so setting a parameter back recomputed what had dropped
out. Each result is now charged for the bodies and sketches it does not share with the state it
started from.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:14:57 +00:00
710b7a664e Save a mesh larger than the design file once it is compressed (#6600) (#6701)
* claim: #6600

Co-authored-by: Cursor <cursoragent@cursor.com>

* Save an imported mesh that only fits after compression (#6600)

The design file limit was applied to the mesh before Deflate, so a mesh
that had already loaded could not be saved or autosaved.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix: validate and version large mesh saves (#6600)

---------

Co-authored-by: Colin Faulkingham <colinfaulkingham@Colins-Mac-mini.local>
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-26 11:13:48 +00:00
NOWN-DEVandClaude Opus 5.5 fa961eaa31 Sheet metal: a pattern of a cut made in the flat is kept like the cut (#6841) (#6853)
* claim: #6841

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sheet metal: a pattern of a cut made in the flat is kept like the cut (#6841)

A rectangular, circular or path pattern of an extrude cut through sheet metal was refused
("this sheet machining cannot be preserved in its flat material"), though the cut itself is
kept as a cut-out of the flat pattern. The pattern replayed its copies through the generic
boolean, whose sheet check refuses any change the sheet model can't keep; the cut goes through
the sheet's flat machining first.

Each copy of an untapered extrude cut is now machined into the sheets the same way, in its
moved sketch plane (a moved copy keeps the extrude's prism certificate), and then cut from the
other targets. A copy that meets a folded bend is refused as the cut is there. Mirrored copies
(the sketch plane turns over) and patterns of an intersect (which cut with the union of their
copies) keep the generic path.

Fixes #6841.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:12:12 +00:00
yhamil04andClaude Opus 5.5 3afcd69a5c Joints: a loop whose axes are a hair out of parallel still moves (#6211) (#6602)
* claim: #6211

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Joints: a loop whose axes are a hair out of parallel still moves (#6211)

Holes picked on parts are rarely exactly in line. A closed loop through
axes a few hundredths of a microradian apart (a lever, link and a rod on
a cylindrical axle) can't close exactly: it closes to nanometres, and the
gap grows as it turns. The loop solver wanted 1e-7 mm, so it threw such a
closure away (the loop stayed open, its parts at 0 dof) or stopped a drive
or drag after a fraction of a degree.

The conflict check is now 1e-4 mm / 1e-6 rad (it was below what its
message can show), and joint.drive / motion and joint.reach close the
loop at each step as at the start: to the tight tolerance where they get
there, otherwise within the conflict check.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:10:45 +00:00
yhamil04andClaude Opus 5.5 a3483ed451 Body rename: an imported assembly's other bodies keep their names and components (#2175) (#6615)
* claim: #2175

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Body rename: an imported assembly's other bodies keep their names and components (#2175)

An Import keeps its body names by the file's body index, and builds no body for the
file's later instances of a repeated part (`skip`). Renaming a body stored the names by
the body's place in the model instead, so every name after the first skipped instance
landed one slot early (and the new name could land on a skipped slot). The rename looked
right until the design was rebuilt; then those bodies took other names, dropped out of
their components and showed up loose in the import's top component.

`Feature::body_name_slots` maps the bodies a feature builds to their stored slots, and
`Feature::pin_body_names` stores current names through it. The rename, the pinning of
later features' names (rename and suppress) and `Document::body_rename_from` use them.

Fixes #2175

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:10:39 +00:00
Dahak BuildsandDahak Builds ab709e6c46 Add base-height and new-body options to Snap Fit (#1994) (#6911)
* claim: #1994

* plastic.snap_fit: base_height and new_body options (#1994)

Base Height extends the snap fit's base below the picked face; New Body
makes the snap fit its own body so it can be patterned or moved. Both
optional, serde-defaulted, old designs replay identically.

* ui: snap_fit length-field defaults list gains the optional base height

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 11:09:30 +00:00
Colin Faulkingham 12b0d9dbff Preserve unchanged results when rolling the timeline (#6008) (#6067)
* claim: #6008

* Reuse rolled-back timeline results after cache eviction
2026-10-26 10:42:32 +00:00
semmelrindeandClaude Opus 5.5 613903229e Patterns: copies of a To Object extrude follow the face it reaches (#2121) (#6093)
A feature's face points are moved onto their named faces before it is
evaluated, so a To Object extrude follows its target face when an earlier
feature moves it. A pattern's or mirror's copies were built from the
feature as stored, with the face where it was picked: after a gear's disc
was made thicker, the tooth reached the new top but its pattern copies
kept the old height. The copies now use the same moved points; the move
is one helper used in both places.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:28 +00:00
NOWN-DEVandClaude Opus 5.5 74321f8bbd Sketch Intersect: crossings on curved faces lie on the surface; a plane on a top face cuts it (#6272)
* Test: sketch Intersect keeps its exact cuts, crosses curved faces on the surface, cuts on a top face

Intersect's cut of a box, a cylinder, a sphere and a tilted cylinder, as it is on main, pinned.
Two cases where it is not exact: a plane through a cylinder's rim cuts the mesh's chord (its sides
come out at 6.3159 and 6.3085, not the square root of 40; a hole's walls at 25.0122), and a plane
on a body's top face finds nothing ("projects to nothing on this sketch plane").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sketch Intersect: crossings on curved faces lie on the surface; a plane on a top face cuts it

Problem: the plane cut that sketch Intersect makes of a body's mesh (project::section) took a
crossing on an edge where a curved face meets another (a cylinder's rim on its cap) from the
merged normals, which are undefined at the crease, so it fell on the chord: a cylinder's sides came
out 0.01 mm off and uneven. A plane through a vertex or on a face counted the vertices on it as
below, so a plane on a body's top face crossed no edge and found nothing.

Solution: the crossings are found by section_segments, which section fits as before: an edge where
a curved face meets another takes the curved face's normals, so the crossing lies on its surface;
a vertex within 1e-9 x the mesh's size of the plane is on it, on one side for every edge (below
when the mesh lies on or above the plane, else above), and an edge ending there crosses at that
vertex, which is an exact point for the fit. Each segment keeps its B-rep face, for a section that
groups them by face. Cuts that were exact are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:08 +00:00
bherbruckandClaude Opus 5.5 4d61100534 Release 0.23.1: version bump, design format 38 (#7035)
The component colour tests no longer assume a design always carries a list of
pending format changes; once the release folds them, there is none.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 07:07:18 -04:00
raykholo 878339cac8 Sketch patterns: count, spacing, and angle follow parameters (#5231) (#5332) 2026-10-26 04:31:55 +00:00
bherbruckandClaude Opus 5.5 348bbc1dfa fix(joints): edge and corner picks follow the part when it changes (#6942)
The Joint dialog kept a round edge (a hole's rim), a straight edge and a
corner as plain points where they were picked. When the part got thicker,
a hole moved or the part got longer, the origin stayed where it was and
the jointed part overlapped the other one. An edit that left the picked
spot where it was (lengthening an arm away from the jointed hole) looked
fine, which hid it. Faces and hole walls were already found by name.

The dialog now sends a round edge as its circle's centre with its z, and a
straight edge or corner as an edge pick with its z. The engine keeps them
by name (the round end by its wall and the face across its rim, the edge
and corner by their edge and face names), with the frame the pick showed;
where it can't (no planar face beside the edge, no names), it keeps the
point as before. Edge origins get an optional axis (along the edge, or a
fixed direction) so a hinge on an edge keeps turning about it.

Tests: every joint type and as-built, for each way the dialog picks an
origin, with the arm made thicker, its hole moved and the arm lengthened,
inside one design and through Update Links.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 04:05:26 +00:00
ArminandArmin 7bcc1ee0eb Drawing: shared number formatter (#5290) (#5315)
* claim: #5290

* doc: add configurable decimal number formatter (#5290)

---------

Co-authored-by: Armin <192400139+armin0411@users.noreply.github.com>
2026-10-25 22:11:39 +00:00
b5bab3f663 Browser: surface bodies get the surface icon in the Bodies folder (#4165) (#4168)
* Browser: surface bodies get the surface icon in the Bodies folder (#4165)

Every row in the Bodies folder had the solid body icon, so a surface (an
open shell, such as a Surface Revolve of an open curve) looked like a
solid. A body whose shell does not close now shows the existing surface
icon; solids keep the body icon.

Body::is_surface walks every shell's edges, so ModelBody caches it once per
body (shared by clones, like outline_bounds) instead of the browser
checking it every frame.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Add the surface icon to the requested-icons manifest

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 21:51:02 +00:00
59cad5f0bb Colored components (feature request #2507) (#2877)
* feat: add colored components inspection toggle

* feat: persist component colors and add cycling controls

* feat: assign component colors in creation order

* fix: update component color menu integration and translations

* fix: proper description for pending format change.

* fix: deleted duplicated format change description from docs/pending.

* Compare the component colour counter in the features-only check

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Vadim Kalinsky <vadim@kalinsky.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:11:03 +00:00
bherbruckandClaude Opus 5.5 8e61eb7d6f Release 0.23.0: version bump, design format 37 (#6868)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:18:36 -04:00
NOWN-DEVandClaude Opus 5.5 826244bb28 Text parameters: a sketch text's words built from them follow every change (#727) (#6364)
* Test: a text's words follow its text parameters, and so does its cut

A sketch text whose words are an expression of text parameters (`Label + '-L'`): a parameter edit
and a configuration row that sets the parameter relabel the text, the text's cut follows, and the
expression is saved with the design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Text parameters: a sketch text's words built from them follow every change

A design's parameters are numbers; a text's words (a part label, a size code) could only be typed.
Text parameters hold words: `parameters.add` or `parameters.change` with `unit: "text"` (the
expression is the text, quotes optional), and `sketch.text` and `sketch.edit_text` take
`text_expression` (quoted texts and text parameters joined by `+`, `Label + '-L'`) instead of
`text`. The text is laid out anew from its expression on every evaluation, so a parameter edit,
a configuration row or a script relabels it and the features built on it (a cut, an emboss)
follow in the same rebuild. The design file keeps the text parameters and each text's expression
(one pending format change); a configuration table's parameter column can be a text parameter;
the Parameters dialog lists them under the unit `text`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Text parameters: the joints' same-but-features check compares the text parameters

The joints are solved once per change unless the design differs only in its features
(same_but_features, #6372), which names every Document field. The text parameters are a
field of their own and change what a text's words evaluate to, so two designs that differ
in them are not the same but for their features.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 20:24:23 +00:00
99d5b43024 Doc: the names of split faces no longer grow with every split (#5860) (#6045)
* claim: #5860

* Doc: stop the names of split faces from growing with every split

* Joints: the long-piece-name test takes the longest name a piece now gets

Split-face names are bounded at 512 bytes since #5860, so the test cannot
build one over 512; it takes the longest the history gives.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 19:58:56 +00:00
raykholo 87c9a37663 Cut and Intersect say which component holds the body they missed (#4639) (#4641) 2026-10-25 18:42:50 +00:00
JK3D e9b9c8f697 Joints: apply a joint solve through indexes instead of searches (#6392) (#6393)
* claim: #6392

* perf: apply a joint solve with indexed joints and occurrences

Every change to a design re-solves its joints and applies the solution. Applying it searched
the joints for each value and, for each occurrence the solve places, searched the occurrences
for it and walked its parents' first occurrences by searching again.

Joints and occurrences are now indexed once, keeping the first of each id as the searches
found it, and the parents' transform is read through the index as the loop leaves it
(component_transform shares the walk, transform_through).

Synthetic design, headless (2000 components at the root with one component inside each, 4000
joints, a solution placing every occurrence): apply 14.1 -> 2.2 ms (median of 12).

The new test applies a solution that moves a component and the components inside it, and
checks each lands where the solution put it, read through its parent as the loop has just
moved it.
2026-10-25 18:42:10 +00:00
HiroKenEzandClaude Opus 5.5 aa8e8cf69c Update Links: show which linked design it reads, off the window thread (#5329) (#5512)
* claim: #5329

* Update Links: show which linked design it reads, off the window thread (#5329)

Update Links read and rebuilt every linked design on the window thread, so the
window froze, with nothing on screen, until it finished. From the toolbar it now
runs as a file operation: off the window thread, with the overlay naming the
linked design being read (cover (2 of 3)), its rebuild step and progress, and
Cancel. The assembly stays as it was until the update is in, and it lands as one
undo step. The command reports each design through doc::progress::item.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 17:41:27 +00:00
Ahmad Khan 0f90fb7e8d Edge flange: material outside and tangent bend positions (#5941) (#6060)
* claim: #5938

* Edge flange: height measured from the outer sharp, the inner sharp or the bend tangent (#5938)

An edge flange feature takes height_from (outer, inner or tangent) in sheet.flange and Height From in the Flange dialog, saved only when it is not the outer sharp. A height shorter than the bend takes is refused with the smallest height that fits.

* Edge flange: material outside and tangent bend positions (#5941)

An edge flange's position can now be material_outside (the inner virtual sharp on the edge) or tangent (the bend's outer face tangent to the edge's face), in sheet.flange and the Flange dialog. The bend starting at the edge was already the outside position, which now also answers to bend_outside.
2026-10-25 16:25:18 +00:00
amolinari-autotex 52e5bc114e Display cosmetic internal and external threads (#2367) (#2868)
* claim: #2367

* feat: distinguish cosmetic threads in shaded views

* test: keep cosmetic thread coverage compatible with current sections and assemblies
2026-10-25 14:53:24 +00:00
bherbruckandClaude Opus 5.5 2cf05388f1 Release 0.22.1: version bump, design format 36 (#6628)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 10:38:36 -04:00
Colin Faulkingham 699f526429 Show imported mesh edges in shaded and wireframe views (#5662) (#5740)
* claim: #5662

* Show imported mesh outlines in viewport (#5662)

* test: update mesh regression origin visibility setup
2026-10-25 12:54:31 +00:00
semmelrindeandClaude Opus 5.5 e5613ebfdf Placing and meshing: no threads started for bodies that are done already (#6406)
Every command in a design with placed components places their bodies
again on up to 16 threads, though nearly all of them are taken as they
were placed before (the same body by the same matrix). Those are now
taken on the calling thread and only the rest are placed on threads.
Warming the meshes (and display plans) of a state likewise starts
threads only for the bodies that have none yet.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 12:48:00 +00:00
Ahmad Khan 5a5a98ee80 Sheet metal: Path Flange, a chain of bends on an existing sheet edge (#4094) (#4096)
* claim: #4094

* Sheet metal: Path Flange, a chain of bends on an existing sheet edge (#4094)

Path Flange (`sheet.path_flange`): sketch an open chain of lines across a sheet edge, pick the
edge and one line; each line becomes a flange as long as the line and each corner a bend, one
feature and one body. The edge flange takes further bends (`then`), each on the far edge of the
one before, and the Flange dialog shows them as rows with a bin each.
2026-10-25 11:33:42 +00:00
Jesper We bbc3aa4301 Offset Plane: through a point (#3765)
* claim: Offset Plane through a point

* Offset Plane: through a point instead of at a distance
2026-10-25 06:02:14 +00:00