Every SMLib analytic surface is a B-spline surface, and its trims are in that NURBS's
parameters. Face::nurbs keeps that NURBS: the face's domain and pcurves are its (u, v), and
`surface` says what the face is. Face::parameters is the surface every (u, v) evaluation uses.
The SMLib conversion reads and writes it (fork FACE_NURBS_FORM, SMLIB_REV c4483f6); the STEP
writer writes the analytic surface and the face's edges without pcurves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
SMLib (fork 68e3086) refuses a blend whose rails leave the faces they roll on with
SMLIB_ERR_NO_ROOM, which the kernel reports as KernelError::TooLarge. The kernel's own
pre-checks go: blend_fit's fit check and the 256-station band check of the variable fillet.
The shim no longer follows tangent chains; the Fillet/Chamfer dialog already expands a pick
to its chain (its Tangent Chain option) and stores every edge in the feature.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Exporters write a plane as a CONICAL_SURFACE whose semi-angle falls a whisker
short of 90 degrees (#4006: pi/2 - 7e-12): its height over the face spans
4e-11, a parameterisation ill-conditioned for everything downstream. The
reader now measures the cone's deviation from its limit plane (the plane
through the placement across the axis) over the face's boundary points and,
should the face hold the axis, the apex; within the file's distance
uncertainty the face's surface is that plane, oriented as STEP's normal.
One criterion, the deviation over the extent against the tolerance; no
semi-angle threshold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Pinned at the fork's draft-corners head: a drafted rectangle (or any
line-line corner) has its walls meet at a corner edge under the tangent
rule as well, 6 faces rather than 14. A curvature refusal for a curve
that is neither a line nor an arc names that curve's start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Extent.corner (preserve_curvature by default, tangent or round), saved
only when not the default (one pending format change), and the
solid.extrude `corner` parameter. draft_corner_options reports what each
rule gives at each corner of a feature's profiles, for a dialog to offer
the others where the chosen one is a poor fit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
extrude_tapered(_between) take a DraftCorner: PreserveCurvature (each wall
continues as itself, a line's plane or an arc's cone, until it meets its
neighbour; SMLib's SM_OC_CURVE_EXTENSION), Tangent (the offsets continued
along their end tangents) or Round (an arc about the corner). A corner
the rule cannot close is refused with its point and why
(solidcraft_smlib::Error::Corner). draft_corners reports, per sharp
corner of a profile, what each rule gives: how far each offset curve runs
on or is trimmed, whether the corner cuts inside the exact offset, or why
the rule refuses it. SMLib pinned at the fork's draft-corners head.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The angles a cylindrical wall spans came from its arc's two ends about its middle; a wall in
one piece has a whole circle for an edge, whose ends are one point. The circle's parameter is
its angle, so the span is the edge's interval about the angle of its middle: half the turn
either side for a whole wall, as for any arc.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
A rim's arc was its two ends and the point halfway, its circle found through the three: a
whole circle, one closed edge now, has one end and no circle through it. Each arc piece carries
its circle's centre and the angle it turns about the face's normal, read off the record circle
(its parameter is the angle), and offsets, profiles, edges and walls are made from those; the
loops' turning is read through points a third and two thirds along each arc. assemble's
unused edge_point goes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Loop2::circle and circle_from gave two half arcs, so everything built from a circle came out in
two: an extruded wall in two faces, a rim in two edges, and so every round, chamfer or sweep on
it in two B-spline halves that SMLib cannot join (two separately parameterised arcs meet at
different curve parameters, SmVertex::IsTopologicalVertex; different free-form surfaces are not
topological, SmEdge::IsTopological). A circle is now one arc of a whole turn from its start
angle: one closed edge, one wall with a seam, one round. Sketch circles, the cylinder builder
(circle_from at its seam angle) and every other builder take it through Loop2; SMLib's arc
curves take a whole turn (smlib_sweeps clamps to one) and ArcSweepCylinder makes the whole
cylinder.
Cases, singly on 9f5ad20c: fillets/1191, 2797, 3753 and sweeps/1269, 2295 fail before and pass
now; eight hole and six thread cases give what the base gives (12 pass, booleans/1279,
booleans/307 and threads/2038 fail as on the base).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Seven sheet-metal cases failed in smlib_planar_faces (status 1001/1006). Every refused
curve list, in the rig's dumps, has curves of which more than two meet at one end point:
flange regions of one flat pattern touching at their corners (405, 349 x2, 436, 1481, 725,
723) and an outline passing a point twice where a cut-out's corner lies on the sheet's edge
(1095). SmBrep::CreatePlanarFacesWith3DCurves, behind SmApiCreatePlanarFaces, documents
that it fails for such "spine points (where more than two curves share a common
end-point)" (SmBrep.cpp); the sheet handed it all of an operand's loops at once.
A sheet is now built one simple loop at a time: each loop (outer counter-clockwise, holes
clockwise) split where it passes a point twice, each simple loop its own planar face, the
counter-clockwise ones united and the clockwise ones taken away with SMLib's 2D boolean,
which takes faces touching at a point. extrude_planar_regions uses the same sheet.
The read-back keeps the contract the regions had: a face's loop that passes a point twice
(a cut-out touching the outline) comes back as simple loops, counter-clockwise pieces
material and clockwise ones holes of the piece that holds them.
Release CLI, SOLIDCRAFT_KERNEL=smlib: 405, 349 (72 and 90 degrees), 436, 1481, 723 and 725
pass. 1095 now gets past the planar regions; its extrusion of a plate with a cut-out
touching its edge at one point fails in SMLib's export ("a closed shell bounds two regions
and encloses one"). Every other sheet-metal case fails or passes as in rig-1, and 529
(a hang in rig-1) passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The five "boundary winds around the surface" refusals of the first SMLib rig run (solid.hole
1355, solid.revolve 1853, 1866 at 180°, 3191, 466) are one mechanism: a revolved face whose
profile ends on the axis (a drill point, a cone tip, a half slot about its centreline) has a
pole, and its two meridian edges meet there with pcurves half or a whole period apart in the
angle, the parameter the pole leaves free. The boundary unwrapped every step to the nearest
copy, so at the pole it moved the next meridian a period along (1866's quarter sphere: from π
to 2π instead of 0) or, where the pole closed the loop (3191: v from 1 back to 0), the closing
step did; the loop then drifted a whole period and the face was refused as winding.
The pcurves are exact and run on continuously, so nothing within an edge is unwrapped now.
Where one edge meets the next, a pcurve starting a whole period from where the previous one
ended is moved back by it, except in a direction the meeting point is a pole of: there the
two pcurves' own values are the ends of the boundary's run along the pole, which the split
poles then carry. Each loop starts at a node off every pole whose predecessor is off them too,
so seam::drift's nearest-copy closing step never crosses a pole. All five cases pass;
tessellation/ and sweeps/ otherwise as in the rig run (1856 and 3006 pass, slow under a
machine load of 190; 2552 hangs as before).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
SMLib's mass properties no longer refuse bodies that are not one manifold
solid: several lumps and lumps touching along edges or points are the sum
over their material regions, and a sheet is its faces' area and centre with
volume 0. Docs of Brep::mass_properties and kernel::measure say so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The ruled surface's far-curve solve kept its own copy of NURBS Book A2.3. The
geom crate now exposes bspline::basis_derivatives (the basis functions alive at
a parameter and their derivatives up to an order, each from its local knots via
local_basis, on the span tess::span_of picks); tess's second-derivative surface
evaluation and the ruled surface both use it, and the copy is gone. smlib's
mod list back in order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Owner's decision for strips whose rulings turn freely along their edge (a face's
normal along a free-form face, which was refused): the far edge is not the
offset curve but a B-spline the kernel defines, and the strip is exactly the
ruled surface between the edge and it.
The far curve has the edge's own degree, knots and weights (so the ruled NURBS
needs no knot merging); it runs from the strip's start corner to its end corner
(where the rulings at the edge's ends reach); its interior control points are
given (handles) or the least-squares solution of weighted terms, the
construction's parameters: closeness to the rulings' ends at the edge's
Greville abscissae (W_CLOSE), fairness by arc length (W_FAIR), each end leaving
along the chord to the other end (W_TANGENT, one small function), and at a joint
where the chain runs on smoothly with shared sides the first and second
derivatives by arc length matched to the neighbour's (W_JOIN), in one solve
along the chain, an exact neighbour's far edge matched as it is. Exact strips
are unchanged.
ruled_far_handles gives each free strip's default handles; ruled_surface_with
takes moved ones. The Ruled Surface feature saves them as `far` (per chain
edge, null for the default; pending format note ruled-far-handles), and
surface.ruled takes them as `far`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
No caller is left for: Assembly::sheet and assemble::outward_normal, Body::shell_nesting,
regularize_generated_planar_faces, with_shell_planar_sources, boolean_record's Traced and
of_pair, offset's normal, plane_fit's plane_through, EdgeSampler, planar_face and
plane_frame (fill has its own on the record), polyhedron's solve3, prism's wall_along,
record::regions/region, splitface's side_of_point, Analytic, analytic_face, face_sides and
canonical, surfaces::picked_loop, sweep_path's closed_path, turn and stations,
shell_groups' groups and parents with their limits, and the whole of spline_conv. Their
tests go with them: prism's curved_prism_wall_requires_positive_separable_rational_weights,
body_lump's shell_grouping_preserves_large_disconnected_patterns_and_bounds_hostile_work,
and regularization protection's check of the generated regularizer. Three names follow
clippy's conventions: into_face -> direction_into_face, from_to -> ends_along, and Params::
to_eval takes its Copy self by value; fill's clash loop walks its slots.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Machine-applied by cargo clippy --fix: borrows the compiler dereferences at once, an
unused import, a manual += , an entry() for contains_key+insert, a needless Ok(?),
contains() for iter().any(). No behaviour changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
mesh memo (one remembered mesh per tolerance), history (a bare body from a record), tests.rs
(no coarse-missing field, lumps for touching shells), outline (the foot found by the planar
faces in its plane), chamfer sides (the rim from the record's edges), seam faces, coplanar
and issue 679 and pinch tests (the boolean is SMLib's: the diagnostics assertions go, every
volume, shell and validity check stays), boolean history (a cut of two pieces through the
boolean), integration tests naming solidcraft_kernel::MeshTolerance.
Deleted, testing internals that are gone: boolean_history_tests' glue_merges_across_the_seam
and faces_pushed_apart (coplanar::glue, boolean_apart), planar_fallback (polybool's
planar_boolean) and bore_union_of_a_bore_in_two_arcs_has_no_history (coplanar::bore_union);
issue_851's the_sphere_at_a_box_corner_is_the_planar_corner_builders (blend_vertex); pinch's
prism_boolean shell check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The truck reads become record reads: an intersection edge of a moved cut, the fillet
mitre edges sampled with CurveEval, the cache estimate from the record's faces and edge
uses, holed faces by their loops. The drain pads and the coincident-faces booleans keep
their volumes and faces without the boolean diagnostics and the polygon boolean.
Deleted, testing internals that are gone: a_tapered_s_curve_is_cut_into_pieces_that_follow_its_offset
(build::offset_error/offset_splits), planar_fallback_names_the_curved_faces (the polygon
fallback), mixed_loop_blend_guards_selection_and_construction and
loop_chamfer_mixed_arc_and_line_uses_offset_intersections (loopblend),
an_attempt_budget_stops_the_boolean_and_is_shared_by_nesting (with_attempt_budget),
placing_a_body_does_not_turn_its_revolved_faces_again (REPHASED, truck's revolution phase),
and the truck debug runs debug_coplanar_union_rate, debug_truck_sphere, debug_sphere_patches,
debug_sphere_cases, debug_sphere_rotations, debug_cube_sphere_measure, debug_heal_sphere_cut,
debug_coplanar_cylinder_union, debug_drilled_hole, debug_face_param_areas and
debug_revolved_tube_cut (truck_shapeops booleans, build::sphere_patches).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
native.rs's test module keeps its encode/decode, wire-record, hostile-input and appearance
tests. Deleted with the adapter they tested: pcurves_on_planes_are_the_curves_mapped_exactly,
pcurves_fit_curved_faces_within_tolerance, pcurves_of_seams_lie_a_period_apart and
pcurve_pictures, with their helpers (pcurves_of, check_pcurves, check_faces, curved_bodies,
seam_faces, draw). smlib_import_tests count shells on the record; their notes no longer
speak of truck.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
- thin faces: the face pinched against its own edge is a record sheet (sew::assemble) meshed
by the body's mesher; its triangles still cover its boundary polygon.
- trimmed loft faces, loft rails: distances to faces through the record's SurfaceEval.
- untouched faces: edges and in-line stations from the record's edges and vertices.
- intersection curves: the #1252 regression on a record sheet whose edge is a traced
intersection of parallel planes: meshing neither panics nor goes non-finite.
- lumps: shells counted on the record; the certified witness is Brep::compound of its three
bodies, faces known by surface and box.
- Deleted, testing internals that are gone: intersection_curve_tests'
degenerate_intersection_polylines_return_none_without_panicking,
closed_intersection_retains_the_closure_and_spherical_supports and
open_intersection_keeps_endpoints_on_both_planes (truck's IntersectionCurveWithParameters)
and a_result_with_an_edge_that_does_not_evaluate_is_refused (boolean_record::edges_evaluate);
body_lump_tests' unowned_overlapping_and_touching_cavities_are_errors_not_dropped_geometry
and shortcut_clearance_refuses_curved_contact_hidden_between_mesh_vertices (truck shells
joined without regions, separated_lumps) — kept as spheres_apart_join_as_two_lumps — and the
shell-order permutation of nested_cavities (the record names each cavity's region).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
- placement: a rigid placement moves the record and nothing else (regions, shells, loops
with their pcurves, edges and their uses equal; every vertex moved; the identity's
history), on a cylinder whose wall's loop uses its seam twice.
- issue 2005, 616, 674, 1038, 1510, join between caps, regularization protection, history,
mesh memo, display mesh: the truck reads become record reads (shells closed by edge
uses, faces by the record's surfaces, vertices by the record's points, the mesher's own
boundary budget); the nearly-in-plane slab of 1510 is an extruded record body.
- Deleted, testing internals that are gone: issue 616's glue_joins_every_face_the_pieces_share
(coplanar::glue) and the_retry_guard_refuses_changes_away_from_the_tool
(boolean_guard::check_retry); issue 674's partial_contact_does_not_join_tangent_or_separated_faces
(coplanar::imprint_union); issue 1038's hinted_division_matches_the_search_from_nothing
(truck's vendored parameter_division); issue 1510's a_face_close_to_the_plane_but_off_it_is_not_moved
(ops::off_plane). The boolean-diagnostics assertions (no retry, no tool nudge) went with
capture_boolean_diagnostics; the rest of each test is kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
solidcraft-smlib is a dependency of every build (it answers NotBuilt without
SMLib), so the SMLib sides of surfaces.rs and blend_smlib.rs no longer sit
behind cfg(feature = "smlib"), and their stub modules go; blend_smlib's tests
run in every build like the rest. This also uses offset_backend::thicken and
the smlib_sweeps curve conversions in builds without the feature, which left
them unused there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The three refusals of the cornered controlled sweep become the owner's rules:
- an orientation direction turns the section about the corner's binormal like
any sweep, then turns it back about its normal to the direction's frame
evenly along the next run, as a twist (direction_offset: the turn between
the carried section and the direction law's section there);
- guide rails follow a path with corners when each rail has a corner of its
own at every corner of the path, in the plane halving it and by the same
turn about the same axis; the rails are cut there into each run's
(run_rails), anything else is refused with the corner named;
- round a closed path with corners the first run starts from the closing
mitre and the last ends on it; a twist is allowed where the profile maps
onto itself (closing_offset), an end scale is refused.
Each run's station count now follows its own turn, twist included.
solidcraft-smlib is a dependency in every build (it answers NotBuilt without
SMLib), so smlib_sweeps' imp is no longer behind the smlib feature and its
stubs and not_built go; polyhedron calls offset_backend in every build.
Deleted as unused: sweep_path::{closed_path, turn, stations}.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
A sweep that twists or scales refused any path whose direction jumps by more
than 1e-3 rad, a branch on the path's shape. It now takes the corner model of
the plain sweep: each smooth run is swept through stations by the laws a smooth
path has (twist and scale running with the length along the whole path, each
run going on from the section the last ended with), and the runs meet at each
corner in a mitre. Turning with the path, each run goes on past its corners as
a prism of its section there (the laws hold still across the mitre: the two
runs' sections meet on the plane halving the corner only when both are the
corner's section) and is cut back to that plane, then turned through the
corner onto the next run; only moving along the path, the runs meet at the
corner's section. The mitre plane is one function for both (mitre_of).
Refused, with the reason, where a control has no meaning at a sharp corner: an
orientation direction (it turns the section by its own turn, not the corner's,
so the two runs' sections don't meet), guide rails (their sections jump where
the path turns), and a closed path with corners (a twist or scale keeps the
last section off the first).
(not built: base in progress; no error in these files)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Intersection::point started its Newton solve from the last point found (a Cell holding both
surfaces' parameters) when that landed near the leader, as truck took a hinted point. The
answer then depended on what was evaluated before, so CurveEval was not Sync, and the
clearance check, which shares a body's DistanceShape (its edges' CurveEvals) across worker
threads, did not compile; with threads it would also have made the result depend on their
interleaving. Each point is now solved from the leader's own point, the path the hint fell
back to, and the unused trace tolerance goes with the hint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
sheet_hole_cut chose by failure: a hole's drills were tried all at once and, if that was
refused, one by one; each drill was tried as a flat cut-out and, if that was refused (or
machined nothing), as a bore. Now the drill's geometry decides, one path each:
- SheetBody::drilled_panels: the panels a straight drill meets and how square it is to each
(|panel normal · axis|); a drill into a bend is refused, as before. add_bore uses it.
- sheet_drill: square across every panel it meets is Drill::Across (sheet_primitive_cut, a
cut-out or pocket of the flat pattern), along every one into a rim is Drill::Along
(sheet_bore_cut, a bore), meeting no sheet is None, and anything else (square to one panel
and along another, or at an angle) is refused with the angle message.
- The all-at-once pass (sheet_drill_cuts) passes its errors on; its None (the drills not all
square along one axis) still puts the model back and drills them one by one.
- sheet_bore_cut passes add_bore's refusal on instead of answering None.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The boss's post and ribs, the boss's hole, the snap fit's arm and the rest started a few
hundredths of their height inside the material (and the hole and the groove ran on as far
past the face), and the groove's cutter reached past the rim edge into the free side, so no
face of a tool lay on a face of the part. SMLib joins and cuts touching faces exactly: each
tool is now the feature's own shape, from the face (a drafted post or rest sized at the
face, the groove's band the rim's own, free reach 0). The material each adds or removes is
the same.
kernel::rim_band's `free` is now always 0 from the doc.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The kernel has no boolean retries now, nor their diagnostics
(capture_boolean_diagnostics, BooleanDiagnostics, BooleanStrategy), nor the near-coaxial
crescent (coaxial_overlap, coaxial_candidate, with_attempt_budget). What read them goes:
- doc: FeatureResult and the evaluation cache carry no boolean diagnostics, and no "Boolean
retry" warning; the saved model no longer writes them (an older file's are ignored);
- engine: timeline.inspect / feature inspection drop `boolean_diagnostics`; fuzz runs and
the CLI fuzz summary drop their retry counts;
- inspect.interference: each pair is the bodies' Intersect, measured; the near-coaxial
crescent, the by-piece intersection of bodies in several pieces and the unverified notes
go (the command's doc no longer lists near_coaxial);
- inspect.clearance: an overlap is the bodies' Intersect, measured near its region; the pin
tries, the cut-down copies of large bodies (clipped, narrowed), the union cross-check
(union_disagrees, contradicted) and the malformed-part check (plausible) go, and the
measure near the origin passes its move's error on.
Tests: the retry test and the unit tests of the deleted checks are removed; the barrel join
test (tests/boolean_diagnostics.rs, now tests/barrel_join.rs) keeps its geometry checks;
the pin-in-bushing test expects the filleted case measured; assertions on empty diagnostics
and on near_coaxial are dropped; the corpus fixtures lose the diagnostics key and the one
retry warning.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Every lib warning under --features smlib outside the files agents are editing
(assemble.rs, sweep_path.rs) pointed at code nothing calls any more:
- body: shell_nesting;
- boolean_record: of_pair and its Traced alias;
- planar_regularize: the generated-wall regularization (and its branches in the
certified one, which was its only other path); planar_sources:
with_shell_planar_sources;
- plane_fit: plane_through, EdgeSampler, planar_face, plane_frame (the patch is
fill's); only loop_area is left;
- polyhedron: solve3; prism: wall_along; offset: Surf::normal;
- record: regions, region; shell_groups: groups, parents and their limits;
- splitface: side_of_point, Analytic, analytic_face, face_sides, canonical;
- spline_conv.rs, all of it (surfaces builds NURBS records); an unused import in
tess/uv.rs.
The tests of deleted items go with them: prism's wall_along test, the shell
grouping test in body_lump_tests, and the generated-regularization assertion in
regularization_protection_tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt