Commit Graph
182 Commits
Author SHA1 Message Date
takuto-NA 63d81cc096 Motion Trace: regenerate kept curves only when inputs change (#5248) (#5270)
* claim: #5248

* feat(motion): regenerate kept traces when source inputs change

* feat(motion): add a parametric Chebyshev trace demo

* perf(joints): reuse face measurements across motion samples

Face-centred joint origins called Body::faces on every solve, bypassing the
reference-mesh reuse used for rigid placements. Share face measurements with
unchanged model geometry at the existing tolerance, while guarding replaced
bodies and applying offsets after the cached measurements.

Cover repeated named/nearest-face solves, shape edits, retained snapshots and
direct replacement with deterministic work counts. The 145-point Chebyshev
dimension and range updates retain identical sampled and interpolated curves.

* perf(naming): skip preparation for cached face names

Both face lookup paths spawned fresh workers over every body even when their name cells were ready. Prepare only cold cells, with direct handling of zero or one cold body. Preserve the existing parallel naming path and all face selection semantics.

Deterministic regressions cover repeated picked and unique-name lookups, misses, partial warmup, renames, snapshots and moved copies. Release Chebyshev medians fall from 859 to 50 ms for a dimension edit and 871 to 34 ms for a sweep edit; all 145 samples and interpolated points remain identical. Full cargo xtask ci passes with RUST_TEST_THREADS=4 and the existing local Windows validation overlays.
2026-10-23 13:42:36 +00:00
raykholo 867df396ea Agent chat in the Flatpak says why no agent is found and how to allow one (#4765) (#4769)
* claim: #4765

* Agent chat: explain the Flatpak sandbox when no agent is found (#4765)

In the Flatpak the sandbox has no home-folder or network access, so agents
installed through nvm or ~/.local/bin are never discovered and the chat only
said that no agent was found. With FLATPAK_ID set and nothing discovered, the
picker and Preferences > AI now say why and offer the exact
`flatpak override --user ai.storyteller.solidcraft ...` command with a Copy
button. The message is in every catalog, and docs/agent-chat.md gains a
Flatpak section listing what each permission is for. The manifest is
unchanged.
2026-10-23 13:42:14 +00:00
raykholo 0c72ad56d2 An idle window draws nothing with the frame-rate readout on (#5165)
The viewport's frame-rate readout asked for a new frame every frame, so with
it on an untouched window redrew as fast as the display allowed and kept the
GPU busy: 77% GPU at 60 fps on an M1 with a 5K display showing the sample,
against 0% with the readout off. It now asks for no frames of its own and
shows how often the view really draws; one frame a little over a second after
the frames stop shows the view idle at 0 FPS. The preference's note no longer
says the view redraws continuously.

The status toast also asked for a frame every half second for the six
seconds it shows; it now asks for one frame, when it is due to go.
2026-10-23 02:19:37 +00:00
ralfkuh-labandClaude Opus 5.5 198fbeb814 i18n: every UI label reaches the catalog, on the UI kit (#2483)
On main, 120 label literals (95 distinct) can't be translated in any
locale: the English catalog doesn't reach them. Catalogue them in en,
ja, zh and de, translate indented row labels once for display and
measuring, look up the thread profile by its id, and give each
navigation preset's help, shown by the mouse mapping picker, a catalog
message.

A guard tokenizes the UI sources and checks every label literal of a
kit call, of context_menu::button and of tr_label/tr/SelInput against
the English catalog, resolving kit calls by their imports.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 21:08:05 +00:00
Jackson OurslandandClaude Opus 5.5 75261cd797 Viewport: order-independent transparency for see-through surfaces (#4734) (#4903)
* Viewport: levels of detail for large meshes (#4724)

A large instanced mesh (20 k triangles or more) gets coarser copies, made
once on a worker (`mesh_lod`): a quarter, a sixteenth and a sixty-fourth of
its triangles, by quadric edge collapse (`geom::simplify`, after Garland and
Heckbert 1997; no fold-overs, no sheets joined, open boundaries kept), each
with its measured deviation from the full mesh. Each frame, as placements
are culled, each is drawn from the coarsest copy whose deviation stays
under 0.75 px where it stands (`placement_scale`, `level_for`). Until the
copies are made the mesh is drawn in full; the scene is built again when
they are. Display only: picking, measuring and exports keep the reference
mesh. Outside the kernel.

25 placements of a 2 M-triangle STL, 3600 x 2190 px, 4x MSAA, M2 Max
(`instanced_scene_gpu_benchmark`): 20.2 -> 1.2 ms a frame with all in
view, 21.9 -> 2.9 ms close up. The copies take 10 s to make, on a worker.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Viewport: see-through and faded parts drawn as instances (#4888)

See-through (an appearance's opacity) and faded (context around an active
component) bodies in one colour are drawn as instances like opaque ones,
their alpha in each placement's colour: one copy of the triangles, levels
of detail and culling, no per-placement copies built on the window thread.
Their placements are ordered back to front each frame (not their
triangles one by one) for devices that sort see-through surfaces.

The GPU benchmark gains `SOLIDCRAFT_BENCH_OPACITY` and the CPU share of
each frame, and its pictures each placement's own triangles too.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Viewport: order-independent transparency for see-through surfaces (#4734)

The model's see-through surfaces (glass, faded context; instanced or not)
were sorted back to front triangle by triangle on the window thread
whenever the view turned. They are now drawn with weighted blended order-
independent transparency (McGuire and Bavoil 2013): when there are any,
the frame is drawn into the renderer's own textures (as supersampling
does), the see-through surfaces gathered into a weighted colour and a
revealage target against the frame's depth, laid over the frame in one
full-screen pass, then the overlays drawn over them. Nothing is sorted.
A device that cannot blend into float targets keeps the sorted way.

25 placements of a 2 M-triangle STL at opacity 0.5, M2 Max, 3600 x 2190 px:
about 10 s a frame sorted, 21.6 ms (17.2 ms instanced, 2.8 ms with levels
of detail).

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-22 16:17:39 +00:00
Nathan Dane 971b28c982 claim: preferences redesign (#4608) 2026-10-22 13:53:36 +00:00
Nathan Dane f79cbc216c Redesign the home page as the File view (#2027) (#3822)
* claim: #2027

* Redesign the home page as the File view (#2027)

* Match the File view with the accepted component design (#2027)

* Restore the Start subtitle and simplify the recovery icon (#2027)

* Integrate File view with main's shared UI containers
2026-10-22 12:19:09 +00:00
Jackson OurslandandClaude Opus 5.5 3d3dd27439 Viewport: leave out placements of an instanced mesh that are out of view (#4646) (#4647)
* claim: #4616

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Viewport: draw a part placed many times from one copy of its triangles (#4616)

A part placed by many occurrences was drawn, framed and picked from a moved
copy of its mesh per placement: on the CPU (the moved mesh and its scene
bytes) and on the GPU (its vertices uploaded once per placement).

- The model scene draws bodies that share a mesh as GPU instances: the
  shared triangles once, a rigid move and colour per placement
  (`InstancedMesh`, `vs_tri_inst`), in the solid, section and AO passes.
  `GpuScene::merged` expands them, so scene tests see world triangles.
- `ModelBody::mesh_in_place`, `plan_mesh_in_place_at`, `mesh_bounds` and
  `display_identity` give the shared mesh, its placement, the exact box and
  an identity without making the moved copy.
- Display refinement's body ids, Fit/Home bounds, the viewport's body boxes,
  the background mesher and picking use them (picking moves the ray into
  the part's frame and shares one pick index).

25 placements of a 2 M-triangle STL on an M2 Max: orbit 45 -> 37 ms a
frame, footprint 41 -> 16 GB, 24 copies 39 -> 18 s.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Viewport: draw large meshes from shared, indexed vertices (#4637)

An instanced mesh's vertices are shared between its triangles and drawn
indexed (`SharedTris`). A flat-faceted mesh (an STL's facets) shares them by
position alone and lights each fragment with its triangle's own plane
(`vs_tri_inst_flat`, `fs_*_flat`), taken from the fragment's position
relative to the eye so it stays exact at any zoom; its vertex outputs are
kept few, since a tiled GPU stores every vertex's outputs. A body alone is
drawn this way from 50 k triangles. A mesh too large for one buffer falls
back to unshared vertices.

`instanced_scene_gpu_benchmark` (manual, ignored): 25 placements of a 2 M-
triangle STL at 3600 x 2190 px, 4x MSAA, M2 Max: 21.3 ms a frame for the
placements' own triangles, 16.1 ms shared and indexed.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Viewport: leave out placements of an instanced mesh that are out of view (#4646)

Each frame `Batches::cull` keeps the placements whose box may be seen
(`placed_box_in_view`: all eight corners past one side of the view in clip
space, so it holds behind the eye too) and writes them again only when
that set changes. The manual benchmark gains `SOLIDCRAFT_BENCH_CLOSE=1`:
close up on the middle of 25 placements of a 2 M-triangle STL (13 in
view), 3600 x 2190 px, 4x MSAA, M2 Max: 28.2 ms a frame for the
placements' own triangles, 17.2 ms instanced and culled.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-22 04:04:59 +00:00
bherbruckandClaude Sonnet 5.5 e23a5bf243 Ship 14 more official themes: SolidCraft 95, Platinum 9, Cupertino, phosphor pair, Blueprint, One Dark and a pack of open-source palettes (#4602)
Registers them after the Gruvbox set in the Theme list, adds attribution rows,
and keeps the heading-band ordering check passing by nudging heading/subheading
(and, for High Contrast, dialog) backgrounds.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 21:00:11 -04:00
Nathan Daneandbherbruck 4b23bb3a03 Implement compact workspace layout (#2029) (#4533)
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover

* Vertical history strip: seam handle to expand and collapse names, drag to resize with snap

* Vertical history strip: no empty gap below the transport

* Show the history seam arrow only on hover (#2028)

* claim: #2021

* Redesign the Assistant chat panel with shared UI components

* Show Assistant in the shared floating panel shell

* Extend floating Assistant to viewport height and shift navigation

* Dock Assistant before history and match docking preview bounds

* Align Assistant top margin with floating shell cards

* Extract a shared panel drag grip

* Rebuild responsive history sizing and three-way docking

* Share browser and History collapse hover styling

* Show the History title as soon as its text fits

* Animate stacked browser and History expansion and collapse

* Make panel folding responsive and independent of frame delays

* Let folding panel contents shrink continuously to header height

* Use four explicit History transport actions in every layout

* Resize the shared Browser and History column from either card

* claim: shared compact-mode containers (#2029)

* Centralize layout-aware UI containers and enforce their use

* Keep docked Assistant at the outer edge beside tool sheets

* Use shared surface policy for Assistant tool space

* Let tool sheets drag over shell panels while avoiding Assistant

* Update Parameters drag bounds assertion for shell overlap

* Keep dragged tool sheets below ribbon and workspace selector

* Enforce universal UI containers in mandatory repository checks

* Remove legacy report windows and require shared window composition

* Remove retired UI styling and require shared controls

* claim: compact layout preference (#2029)

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-21 20:52:36 -04:00
bherbruckandClaude Sonnet 5.5 920398ac53 Bring back the view-change glide; orbit, pan and zoom stay instant (#4596)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 20:37:19 -04:00
dfd58293a6 Navigation: opt-in free orbit and shared Normal to Selection (#1912)
* Navigation: opt-in free orbit and shared Normal to Selection

Preserve the complete reviewed feature, shared camera setting propagation,
rigid pivot behavior and focus/drag regressions from PR #1912.

Consolidate the prior main-integration commits before rebasing, so their
merge-resolution fixes remain in the linear feature history.

* docs: move free orbit help beside viewport controls

* Merge main into fix/solidworks-free-orbit

Camera animation is gone on main, and with it the orbit snap spring: the Shift
snap keeps its unsnapped orbit in orbit_free, which the free-orbit checks now read.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 23:29:29 +00:00
ba4f7864ff Export Current View as DXF includes shown sketches (#3708) (#3780)
* claim: #3708

* Export Current View as DXF includes shown sketches (#3708)

The view export refused a design with only a sketch and left shown
sketches out when bodies were present. It now draws the sketches the
viewport shows (profile curves only: no construction geometry, points,
dimensions or constraints) on a SKETCH layer, one entity per curve.
Finished sketches are hidden behind bodies through the body-edge
occlusion; the active sketch is drawn on top, as in the viewport.
Sketch points use the same projection, budgets and cancellation.

The export is refused only when there is neither a visible body nor a
shown sketch curve; the dialog and the command share that check
(cmd::view_dxf_exportable).

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 23:09:57 +00:00
4ab3a85323 Bug report: clarify the form and retain margins on resize (#2244) (#2246)
* claim: #2244

* fix(ui): guide bug reports with a bounded, labelled form

* fix(ui): export bug reports after processing current-frame edits

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 21:49:11 +00:00
Nathan Dane 63f210b49f Restyle the vertical history sidebar (#2028) (#3953)
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover

* Vertical history strip: seam handle to expand and collapse names, drag to resize with snap

* Vertical history strip: no empty gap below the transport

* Show the history seam arrow only on hover (#2028)

* Extract a shared panel drag grip

* Rebuild responsive history sizing and three-way docking

* Share browser and History collapse hover styling

* Show the History title as soon as its text fits

* Animate stacked browser and History expansion and collapse

* Make panel folding responsive and independent of frame delays

* Let folding panel contents shrink continuously to header height

* Use four explicit History transport actions in every layout

* Resize the shared Browser and History column from either card
2026-10-21 18:56:55 +00:00
amolinari-autotex 5e05d925e0 Tapped Hole: keep Custom selection and edit nominal diameter (#2440) (#2441)
* claim: #2440

* feat: choose ISO metric tapped-hole sizes and derive the drill diameter

* fix: label the tap drill and hide the unused diameter editor

* test: cover tapped hole catalogue and drill sizing

* fix: omit coarse metric pitch from generated designations

* Keep custom tapped-hole nominal diameter and pitch editable

Preserve Custom as dialog state, derive the existing metric designation from numeric inputs, and refuse invalid drafts without applying the last valid size. Retain manual text editing, physical tap-drill geometry and saved-design compatibility.

* fix(i18n): register custom tapped hole labels in source catalogs

* Adapt tapped-hole Custom fields to the current form kit

* fix: preserve tapped designation focus with dynamic custom rows
2026-10-21 18:56:38 +00:00
f22a026c27 3D mouse: choose which motion drives each axis (#2782)
* 3D mouse calibration: find each axis from a guided recording (#1463)

A recording of the cap at rest and moved along each axis both ways gives which raw axis is which,
which way it runs, where it rests, how much it wanders at rest and how far it goes each way.
Hands aren't exact: on our SpaceMouse Pro, sliding the cap right moved Ry further than X. So each
raw axis is picked by the one-to-one assignment that best explains all six motions together, each
raw axis scored against its own range so a wider one doesn't win through cross-talk. Each
direction is scaled on its own, so a device that goes further one way still reaches full scale
both ways; a direction under a twelfth of the furthest axis counts as not having responded.

A small state machine walks the user through it and moves on by itself once the cap has been held
out for 0.4 s in one go and let go. "Held out" is the least the solver accepts, twice an axis's own
rest wander, so whatever the solver would accept can be recorded and a noisy axis doesn't hold up a
quiet one.

A calibration also carries a dead zone the user sets, a share of full deflection taken off the
bottom of the travel, with full deflection still reading full scale.

Serde support is behind an optional feature, so the crate still needs nothing by default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse calibration in Preferences, saved per device (#1463)

Preferences > Navigation gets a 3D mouse calibration row: whether the device being read is
calibrated, Calibrate... and Forget calibration. The window asks for each motion in turn and
saves what it found under the device (hid, web, spacenavd or 3dxware, with vendor and product ids), so
switching devices or turning spacenavd on doesn't apply the wrong mapping. A calibration is saved
for the device it started with, and ends if another one is read instead.

navigate_frame puts the reading through the device's calibration before the driver mapping, so
the per-axis Invert and speed and everything after them are unchanged. While the window is open
the reading goes to it and the view stays put; it closes with Preferences. Restore Defaults on
the Navigation page keeps calibrations, since they describe the device.

The web app hands over the gamepad's readings as they are, so calibration sees where the cap
rests; navigate_frame now leaves a reading inside the dead zone alone after calibration, so a
cap resting just off zero still doesn't keep redrawing. Whether the cap is moving is asked of the
calibrated reading there, in the web page's idle waker and in both wheel filters. Those run before
the frame, so they keep the last frame's calibration with its device and use it only for that
device. On the desktop, an axis with nothing fresh (timed out, or not reported since the device
connected) reads as the device's calibrated rest, so a device resting off zero doesn't drift.

A saved calibration that can't be read or used (a hand edit) is dropped on its own when the
preferences load, with a log line.

The window shows the device's raw readings live and has a dead zone slider, a share of full
travel on top of the measured noise; it's saved with the calibration and adjustable in Preferences
afterwards.

New strings are in all 14 catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: choose which motion drives each axis (#1463)

After calibrating, which motion of the cap should drive which view axis is partly a matter of
taste: rolling and twisting swapped, say, or Y and Z. Each axis row in Preferences > Navigation
now has a "driven by" choice next to Invert and speed. Picking a motion another axis uses swaps
the two, so each motion always drives exactly one axis, and Reset axes puts them back.

The choice applies after the device's calibration and before the driver mapping, so Invert and
speed stay with the view axis rather than moving with the motion. It's a preference, not part
of a device's calibration, and stays in force when recalibrating; the calibration window says
so while one is set. A saved assignment that doesn't drive each axis once loads as the default.

New strings are in all 14 catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: axis choice review follow-ups (#1463)

- An axis's speed, like its Invert, stays with the view axis when a motion is reassigned; tested.
- Calibrating records the device's own reading, before the axis choice, so a saved swap isn't
  baked into a new calibration and then applied twice; tested through a whole calibration.
- A settings file without the axis choice, or with one of the wrong length, loads with the
  default and keeps every other setting; tested.
- Each axis row says "driven by" in sight before its choice, which otherwise only explained
  itself on hover (no help on a touchscreen or the web).
- "Reset axes" is now "Reset axis assignment", so it doesn't read as forgetting the
  calibration just below it; the "driven by" tip reads more clearly in English.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: name axis rows by what they do, and motions without a device in mind (#1463)

The axis rows and the "driven by" choices showed the same names, "Push left / right" and so
on, which read as one thing mapped to itself, and they described a cap that springs back to
centre, which a trackball or a knob that stays put isn't.

Each row is now named for what it does to the view: Pan left / right, Zoom, Pan up / down,
Orbit up / down, Orbit left / right or Roll, or Off. The name comes from the driver mapping
navigation used last frame, so it stays right where the mapping swaps axes (object mode swaps
the last two). Before navigation has run there's no mapping to read, and a row is named for
its own motion instead of a guessed effect. The choices are the device's calibrated motions:
Translation X / Y / Z and Rotation X / Y / Z, under a header row, and the calibration window
names a motion that barely moved the same way. This renames #1814's existing rows, which had
no translations; every new name is in all 14 catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: rows never fall back to a motion name (#1463)

Without a driver mapping, a row was named for its own calibrated motion,
which is also what its dropdown lists. It now takes the default mapping's
view axis, so the two sides never share a name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: grey out Invert and speed on rows the driver turns off (#1463)

A row the driver profile turns off says so on hover, and its Invert and
speed are greyed out, since they do nothing there. Its motion choice stays
live so a motion can still be swapped out. The column header is shorter.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: unmapped rows say Axis 1-6, and the off-row tip explains the swap (#1463)

Without a driver mapping, a row is now just "Axis n" rather than the
default mapping's view axis, which would be a guess there. The tip on a row
the driver turns off says that a motion swapped into it stops moving the
view, and a test swaps one in and back out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse calibration: a device that stops short of rest after a release (#2778)

Through spacenavd, a relative-axis device like the Space Navigator never
reports its return to zero, so the reading stays at its last small report
after every release. The wizard never saw the cap let go, and once
calibrated, the stuck value crept the view.

A reading that stays exactly the same, close to rest, now counts as let go,
and where the cap settled after each step goes into the calibration: such a
device rests at the middle of where it settled, with a dead zone out to the
furthest of them. A device that comes back to rest calibrates as before.

* 3D mouse calibration: a steady hold through spacenavd stays a hold (#2778)

* 3D mouse calibration: stopping short of rest only counts from spacenavd and 3DxWare (#2778)

Recentring on where the cap settled kept the rest stage's wander radius but
not its offset, so a rest extreme could fall outside the dead zone; the
radius now grows by how far the centre moved. A reading that stops changing
close to rest only ends a step from a source that sends nothing at rest, so
HID and web devices calibrate exactly as before.

* 3D mouse calibration: settling off-centre counts on any device (#2778)

A drifting stick settles off its rest after a release just as spacenavd's
stuck reading does, but it keeps reporting, noisily. A step now ends once
the reading stays steady, each raw axis within twice its rest wander (so
exactly still from a silent source), close to rest, on any device. The
dead zone takes that wander on top of the furthest settle point.

* 3D mouse calibration: steadiness by the run's spread, settled on the step's own axis (#2778)

An axis that read flat at rest may dither once off-centre, so steady
readings may spread at least 2 units and a 50th of the furthest any step
went. Steadiness is the spread of the whole run, not distance from its
first reading. Close to rest is judged on the axis that set the step's
peak, since a device's axes may have different ranges, and the settle point
is the middle of the steady run.

* 3D mouse calibration: readings close to rest never count as held (#2778)

* 3D mouse calibration: the dead zone reaches every reading of each release (#2778)

Saving one reading of each release and padding it by the rest wander could
miss a reading seen in the same steady run. Each release now keeps the whole
run, and the dead zone is centred on and reaches everything read at rest
and after the releases.

* 3D mouse calibration: settle for half a second before a step counts as let go (#2778)

A hand held still close to rest is less likely to end a step early; a
device that comes back to rest never waits for it.

* 3D mouse calibration: show the dead zones as a game controller tester would (#2778)

Once calibrated, the window, and Preferences under the Dead zone slider,
show three pads: slide, press and twist, and tilt. Each has a circle for
the full travel, the dead zone shaded inside it with each direction its
own size and the user's dead zone on top, and a dot where the cap is now,
lit once the view moves.

* 3D mouse calibration: settle through cross-talk, per-axis steadiness floor (#2778)

The axis that went furthest in a step needn't be the one asked for:
cross-talk can move another raw axis further. A step now counts as let go
once the furthest axis is at least halfway back and some axis that moved
about as far is within a quarter of its own peak; a hand still holding the
push keeps the furthest axis out. The steadiness floor follows each axis's
own reach, and each stage's steadiness starts with its own readings.

* 3D mouse calibration: steady readings may dither ±2 on any axis (#2778)

* space-mouse: make the settle check's near band match the steadiness spread, test the 4-unit floor

near() measured distance from the settled run's middle against the whole tolerance,
so it accepted twice the band the steadiness check does. Use half. Add a short-range
test where only the .max(4.0) floor lets a +-2 dither settle, and one where dither
the spread check rejects is also not skipped as untouched.

* space-mouse: settle on the middle of the steady run so a lopsided dither isnt movement

near() allows half the steadiness spread around the settled point, but the point was the run mean. A dither that is mostly one value with an occasional far one (10, 10, 10, 14) is steady, yet the far reading sat 3 from the mean and started a hold in the next step. Use the middle of the run range instead.

Adds a lopsided-dither test and a test pinning the documented cross-talk limit ([100,300] then [5,90] stays open).

* Judge an untouched cap by the settled run's spread, not a rounded midpoint

Rounding the midpoint to i16 could leave one end of an odd-width run more
than half the tolerance away, so the cap read as touched while sitting at
the end of the run it settled on. Keep the run itself and ask whether one
more reading keeps its spread within tolerance.

* space-mouse: pin the wider skip band of a narrow settled run and a single-reading settle

* space-mouse: keep a step held while a lesser axis stays out as the larger one relaxes

Settling needed one axis furthest and returned, and one axis about as far and settled, which a single relaxed cross-talk axis satisfied alone. Every axis that moved at least half as far as the furthest now has to be back by RETURNED_SHARE of its own peak too.

* 3D mouse: the calibration tests run in a focused window, as the focus check now requires

* 3D mouse: the axis tests run in a focused window, as the focus check now requires

* 3D mouse: the calibrated-rest test runs in a focused window, as the focus check now requires

* Settle a spacenavd reading that is nearly at rest (#3523)

spacenavd sends a record only when the values change and nothing when the cap springs back, so the last small leftover of a release was held forever and the view kept drifting.

A held reading now reads as rest once every axis is within 150 raw units of the device rest and no record has arrived for 0.5 s. A firmer push stays as long as it lasts, and so does a small value next to a large one. 150 is the smallest round number above the worst leftover in the issue (129 on one axis).

* Choose which 3D mouse driver to read on Linux

When both spacenavd and the device itself (hidraw) are there, Preferences now has a "3D mouse driver" choice: Automatic, spacenavd or Direct. Automatic is what it always was, spacenavd when it runs and the device otherwise, so nobody's setup changes. If the chosen one isn't available the other is read and the log says so once. Each driver keeps its own calibration, as before.

To switch without a restart both reads now wake up when idle and look at the choice: spacenavd with a 250 ms read timeout, hidraw opened non-blocking and polled every 5 ms when it has nothing. A record that arrives is read as before, and one split across a timeout is kept. The reader also publishes which of the two exist, which is what shows the combo box; with only one it says which one is in use.

* Build the 3D mouse row header from existing labels

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-21 11:29:33 -04:00
bherbruckandClaude Sonnet 5.5 cb3cabeda1 Remove camera animation: every view change and orbit applies at once (#4296)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 11:19:40 -04:00
SS-ENandClaude Opus 5.5 776541b081 Agent commands compute off the window thread, so the window stays live (opt-in) (#1989) (#3340)
An agent's design changes over the control channel (engine.execute, engine.batch) are evaluated
ahead on a copy of the session on an `agent` worker, then run on the window thread reusing every
feature computed there (doc::KeptResults, whatever the bounded evaluation cache dropped); the
worker also makes the display meshes of the bodies they end with. Exports run on a copy. While a
change computes, or the agent cursor acts one out, ui.*, inspection and screenshots answer; later
design changes wait their turn. A chip names the command with Stop. A person's edit meanwhile goes
first; a replaced design refuses the request. Preference: Preferences > AI, agent_off_thread, off
by default.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:58:56 +00:00
bherbruckandClaude Opus 5.5 818af2b856 Icon audit: regenerate the requested-icons manifest (#3969)
The menus no longer ask for offset_one_side, offset_symmetric,
offset_two_sides, pattern_center or pattern_flip, so the manifest check
failed on main and on every UI pull request.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 22:08:10 -04:00
CamWightandClaude Opus 5.5 ac362945cc English (UK) as a language: a plain catalogue of the 25 messages UK English spells differently (#2501) (#2502)
* claim: #2501

* English (UK) as a language: a plain catalogue of the 25 messages UK English spells differently (#2501)

assets/locales/en-GB.json holds only the English messages whose spelling differs in UK English (Centre, Customise, Organisation, Licence, colours, towards, ...), in UK spelling; every other message falls back to English. One registration in i18n.rs (English first, then by id), a test that shows UK spelling and English for the rest, a row in ATTRIBUTION.md, and the docs/localization.md note. The translation-coverage checks skip a regional English catalogue, which has no gaps to report.

Fixes #2501

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:44:19 +00:00
rlartotandClaude Sonnet 5.5 edad8078ba Ribbon tooltips: a short written help for the main tools (#2758) (#3089)
* claim: #2758

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* Ribbon tooltips: a short written help for six tools (#2758)

Extrude, Revolve, Fillet, Chamfer, Shell and Hole get two sentences under the
tool name in the ribbon tooltip (en, ja, zh). Text only.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* fr: aide des infobulles (6 outils) (#2758)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Ribbon help: also in the panel drop-downs (#2758)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 00:39:43 +00:00
bherbruck cb1b230732 Add Dutch, Swedish, Traditional Chinese, Indonesian, Romanian and Hungarian (#3826)
The new catalogs are machine translated; native speakers, corrections are very welcome.
2026-10-20 17:32:44 -04:00
bherbruck a9aab13d92 Translations: complete Ukrainian, French, Danish (#3802)
The added strings are machine translated; native speakers, corrections are very welcome.
2026-10-20 16:28:31 -04:00
bherbruck 6235295ba6 Translations: complete Czech, Italian, Vietnamese, Spanish (#3801)
The added strings are machine translated; native speakers, corrections are very welcome.
2026-10-20 16:28:27 -04:00
bherbruck 51e2f0a34b Translations: complete Malay, Brazilian Portuguese, Polish, Galician (#3800)
The added strings are machine translated; native speakers, corrections are very welcome.
2026-10-20 16:28:22 -04:00
bherbruck 0191e3e157 Translations: complete Russian, Korean, German, Turkish (#3799)
The added strings are machine translated; native speakers, corrections are very welcome.
2026-10-20 16:28:17 -04:00
Nathan Dane c78095ccde Fix UI stack integration after rebasing on main 2026-10-20 21:50:22 +02:00
Nathan Dane d45fcce72c Command search popup on the UI kit; the bottom command line is gone 2026-10-20 21:01:32 +02:00
Nathan Dane a3e2fe25bb Context menus, radial menu and rename popover on the UI kit 2026-10-20 21:01:25 +02:00
Nathan Dane 57aad71bbe Window frame with page list and the confirm dialog on the UI kit 2026-10-20 21:01:25 +02:00
Nathan Dane f2eaead594 Per-tab accent tokens: fill, ink and tint for every tab, with a contrast guard 2026-10-20 21:01:25 +02:00
Nathan Dane a5e0fe3ec4 Parameters, Configuration Table, Crash Reports and Appearance redesign (step 8 of #2016, after the cleanup PR) 2026-10-20 21:01:25 +02:00
Nathan Dane dad56187df Cleanup after the popup move (step 7 of #2016, after the panels PR) 2026-10-20 21:01:18 +02:00
Nathan Dane 7026248e25 Every popup and panel on the UI library (step 6 of #2016, after the library PR) 2026-10-20 21:01:11 +02:00
Nathan Dane 1122cd44b8 UI library, tokens, fonts and icons (step 5 of #2016, after #2287) 2026-10-20 21:00:56 +02:00
Nathan Dane 837dbe66df Compass and viewport overlays (step 4 of #2016, rebased onto step 3) 2026-10-20 21:00:50 +02:00
Nathan Dane 845edeba5f Floating browser card and history strip (step 3 of #2016, rebased onto step 2) 2026-10-20 21:00:50 +02:00
Nathan Daneandbherbruck a0c1a67220 Application bar and ribbon redesign (step 1 of #2016) (#2176)
* ui: spacing, radius and type tokens, per-tab accents, agent and on-accent tokens

* ui: per-tab accent behaviour and a larger application bar with a Start page button

* icons: silhouette master and flat assistant and agent link icons (open for review)

* icons: apply review notes (sparkle assistant, refined plug, silhouette halo)

* icons: wire the silhouette master to inspect.silhouette; record the accepted icons

* ui: application bar to the design: separators, Save, house, assistant icon, readable hovers

* ui: ribbon structure: Model to View tabs, contextual Sketch and Sheet Metal, migrated pins

* ui: ribbon painting to the compact design

* ui: smaller icon button highlight and assistant mark on the bubble corner

* ui: short ribbon labels that wrap at spaces

* ui: ribbon buttons fit their labels and Finish Sketch shows its full name

* ui: constraint gallery, workspace menu, section list headings and richer tooltips

* ui: lighter selected tab label, ribbon surface and dimmer bar separators match the dark design

* ui: document tabs as rounded chips with a dimmer inactive label

* ui: document tabs fit their names and show close only when active or hovered

* icons: close and plus masters for the document tabs (open for review)

* ui: centre the new-tab plus and overflow button on the bar

* ui: a quiet rule under the ribbon tabs on non-contextual tabs

* ui: the application bar mark separates its faces with the bar colour, not white

* ui: open ribbon section label uses the selected tint and a chevron

* ui: dim the tab close and plus icons until hovered

* ui: every ribbon dropdown uses the chevron, the workspace card included

* ui: the active document tab uses the design's surface colour

* ui: the bug button's right padding mirrors its icon side

* ui: square constraint cells and a rule before the grid

* ui: constraint cells back to their earlier size, keeping the rule

* ui: smaller constraint cells and icons, centred in the section

* ui: constraint cells fit the height of the large buttons' icon and label

* ui: sketch Create titles share the other labels' line

* ui: format the application bar and ribbon changes

* ui: active tab surface token and the colour and hover tests that follow the redesign

* tests: the merged parameter and narrow toolbar tests follow the compact ribbon

* i18n: the Malay Gap label has an English source and its Japanese and Chinese translations

* apply_off_thread tests: the evaluation lingers in tests, so still computing never depends on machine speed

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 17:23:49 +00:00
Victor Santos Oliveira 5305d7c82d Clarify delayed detection in unclean-exit reports (#3640) 2026-10-20 16:05:55 +00:00
Christian Svensson 511faedcfa Fix OpenGL startup with portable AO depth reads (#2888) (#2933)
* claim: #2888

* fix: preserve AO depth in a portable integer texture (#2888)
2026-10-20 11:41:40 -04:00
SS-ENandClaude Opus 5.5 c7bd467be7 joint.inspect: show agents what each joint is attached to (#3453)
* joint.inspect: what each joint is attached to, for agents

A read-only `joint.inspect {joint?}` gives each joint's definition: for each
side the occurrence, its component and path, the snap as saved, and what
each persistent face/edge name refers to (the feature that made it, and the
sketch and curve a swept side came from), whether the origin resolves and
why not; plus kind, offset, angle, flip, values with limits, expressions,
the motion links it is in, and its solve errors and conflicts. Its id ends
in `.inspect`, so agent gates treat it as reading only.

MCP `inspect_design` includes the definitions when the design has joints
(`joints: false` leaves them out). joint.list and joint.inspect share the
motion-link JSON.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* i18n: catalog entries for Inspect Joint (en, ja, zh)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:21:54 +00:00
SS-ENandClaude Opus 5.5 fb811fbf21 Sketch trim: drag a path across curves to trim every piece it crosses (#3182)
`sketch.trim.path {points, dry_run?}` walks a polyline and, at each place it
crosses a curve trim may change, removes that piece exactly as `sketch.trim`
would there, in the order crossed and in one undo step. A piece already gone
is not trimmed again; projected geometry, infinite lines, offset outputs and
pieces trim refuses are passed over (reported in `skipped`). It returns each
trim's result and each removed piece as a polyline; `dry_run` reports them
without changing the design.

With Trim on, a press and drag in the viewport draws that path: the pieces it
would remove light up (a dry run of the command) and letting go runs it. A
click still trims the one piece under it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:20:12 +00:00
shop-3d 2061ad1694 i18n: add missing Danish translations (#3028)
* i18n: add Danish (da) UI translation

* i18n: refine Danish part properties wording

* i18n: sort Danish catalog in canonical key order
2026-10-20 12:39:11 +00:00
953fd7d5f8 Typed parameter contracts and JSON Schemas for solid.box and solid.extrude (#2829) (#2611)
* Spike: typed parameter contracts and JSON Schemas for solid.box and solid.extrude

The schema RFC's spike (plan/schema-spike.md). solid.box and solid.extrude get
typed contracts with generated JSON Schemas (2020-12), checked in front of the
unchanged handlers by a per-session level: off (the default, which changes
nothing), warn (the call runs and gains param_warnings) or strict (the call is
refused and the design left alone). Also engine.describe and the MCP tool
describe_command, `solidcraft-cli mcp --param-check off|warn|strict`, a
FeatureResult type for feature replies, and an env-var audit recorder
(SOLIDCRAFT_PARAM_AUDIT) used to check the contracts against every test.

Local spike branch; not for upstream as is (see the results report).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Parameter contracts: put the audit recorder behind a feature; drop two ignored test keys

The audit recorder is now on only in a build with the engine's `param-audit` feature
and `SOLIDCRAFT_PARAM_AUDIT` set. Its code is still compiled, linted and tested without
the feature. `scripts/param_audit.py` summarises a test run's audit logs, and the schema
module's docs give the steps for converting a further command.

Two tests passed keys their command ignores, which the audit found: `position` on
`solid.box` (`hole_face_tests.rs`) and `symmetric` on `solid.extrude` (`face_tests.rs`).
Both are removed, so the tests build what they always did. Comments no longer call
the contracts a spike.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 10:45:08 +00:00
37a8402cae surface.blend: seam alignment, chain-topology refusal and a dialog (#764) (#2488)
* kernel: a blend runs along chains of several faces and lines closed rims up (#764)

A blend's chain may run along the boundaries of several faces (a tube's rim
along the halves of its wall): each edge continues from its own best-facing
face, read station by station. Before, a chain had to be the edges of one face,
so every rim of a revolved or cylindrical surface was refused.

Two closed chains blend from matching seams: the second chain's start (searched
by arclength, then narrowed) and direction are the ones that put each station
closest to its partner, so rims whose seams sit apart no longer twist. A
picked `seam` point on each chain fixes the start instead. A closed chain
against an open one is refused. Closed chains leave towards each other's
centroid, not a point on the rim.

Stations are read on the edges' own curves, not on the chords of the length
table (they sat up to the chord's sagitta inside a curved edge), and the
reported gap is measured to the curves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: closed blend chains run round the same way; Hermite strip and seam tests (#764)

The second of two closed chains runs round the same way as the first (by
their area vectors), so a picked seam turns the blend by just the angle
between the seams instead of folding it over. The nearer pairing decides only
when the loops stand almost at right angles.

Tests for the issue's gates: the blend between two offset box rims is the
analytic cubic Hermite strip (control points from the chord) and keeps the
top faces' normal along both seams; picked seams a quarter apart turn the
blend a quarter round.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.blend: `seam` picks where each chain's stations start (#764)

A point on each chain, saved with the feature (one pending format change),
moved with the design like `align`, and refused when it is not two points.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.blend: a test between two tube rims, their seams picked and saved (#764)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Blend dialog: edges at each end, continuity and bulge per end, stitch (#764)

SURFACE › CREATE › Blend Surface opens a dialog: the edges the blend leaves
and the ones it arrives at, each end's continuity (G0–G3) and bulge, and
Stitch to both bodies. Edit Feature brings it back and keeps what the dialog
does not show (align and seam points). Labels in every locale catalog.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ROADMAP: M8 Blend runs along several faces, pairs closed rims and has a dialog (#764)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: a blend station on the vertex between two support faces is read on the neighbour (#764)

A station where a tube wall's two halves meet sits at a corner of one half's
parameters; with a leave direction that turns round the wall (tubes off each
other's axis) the shape could not be read there and the blend was refused. The
neighbouring chain edge's face holds the same point and reads it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* blend: review clean-ups (#764)

- ChainLine keeps one list of samples instead of four parallel lists.
- frames_on and boundary_gap take the chain's ChainLine instead of rebuilding it.
- A station is read on the neighbouring face only when it sits on the vertex the two edges
  share, each face once, and each face keeps its own walk.
- The seam rule (a closed chain starts at it, an open one runs from the nearer end) lives in
  ChainLine::start_at_seam; pair_with reuses the start of its both-ways search.
- support_faces projects with curveblend::project; loop_area sits with plane_through.
- surface.blend parses `align` and `seam` through one point_pair; the Blend and Ruled dialogs
  share body_and_edges.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 04:26:12 +00:00
fe3b14e798 refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)
* Iterate instead of indexing in nine loops

Replace index loops that look up neighbours by position with enumerate,
zip(cycle().skip(1)) for wrap-around pairs and zip(skip(1)) for
consecutive pairs. No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: ring_edges for the edges of a closed ring

Every walk over a polygon's edges, the last back to the first, spelled
x.iter().zip(x.iter().cycle().skip(1)); eighteen of them now call
geom::ring_edges. Three redundant take(len) calls go with them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Ring, a closed ring that knows it is closed

A Ring holds items in order around a closed polygon, loop or fan; edges()
walks each with the next and the last with the first, corners() each
with both neighbours. Ring<Vec2> has signed_area and even-odd contains.

Loop2::polyline returns a Ring, as do doc's face_loops and
boundary_loops, kernel's coplanar wire samples, CapLoop's segments,
tess pieces' rings, the gizmo's plane quads and the navigation cube's
facets. Their walks take edges() or corners() instead of wrapping an
index; sketch's text-hole test and doc's poly_area become contains and
signed_area. Loop2::joints pairs each segment with the next.

Replaces the ring_edges free function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain, Ring and Path; bounds for a chain of points

Ring becomes Chain<T, Closed> beside Path = Chain<T, Open>: edges()
closes a ring and stops at a path's end, Path::close makes the ring,
and bounds() (the empty box for no points) serves both. Eight
hand-rolled min/max folds over a loop's polyline call bounds(); doc's
flat_polyline returns a Ring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area and inside on Ring for any planar point

Ring's signed_area and contains take any Planar point (Vec2 or
[f64; 2]). The cam profile in joints_cam is a Ring: its own even-odd
test goes, and its edge walks, gap and area take edges(). face_params'
loop area, the text path's winding, tess pieces' ring area and the
copies in three tests call signed_area or contains; the formulas are
the same term for term.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: sheet's closed outlines go through Ring

dedup takes and returns a Ring (dropping a last point back on the first
is what makes it a ring's), near_outline walks a Ring's edges, and the
copy of it beside fold checks calls it. point_in goes: its callers ask
the Ring. Its formula anchored each crossing on the other end of the
edge, so the two can differ only for a point on an edge to the last
digit; one caller sets such points aside first, the others test a
region's interior point, a cut's midpoint or another outline's corners.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: cam tests build their outlines with Ring::from

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area_vector on Ring<Vec3>; three Newell sums use it

Ring<Vec3>::area_vector is half the sum of a × b round the ring. heal's
loop_area, lip's outer-loop turning and the revolve's loop orientation
summed it by hand with a wrapped index; they take it from the Ring
(the half is exact, and two of them only read its sign).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3 from points; boxes built and asked through it

Aabb3 collects from points (skipping non-finite ones, as add does) and
gains inflated, contains and meets. Fifteen hand-rolled min/max folds
over points or boxes in kernel, doc and engine become collect or union,
and their "within tol of the box" tests become inflated(tol).contains.
blend's refused-edge boxes and naming's face index hold an Aabb3.

A NaN point is now outside every box, where the old negated
comparisons let it in; an infinite point no longer stretches a box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb2, the plane's box; 2D folds and box tuples use it

Aabb2 mirrors Aabb3 (collect, add, union, inflated, contains, meets)
and adds relative, a point's place in the box. sketch's link and
link_loops each had that formula; link_loops' boundaries, prism's
segment and loop boxes, profiles' shape boxes and grid, and ends'
segment box hold an Aabb2 instead of a (low, high) pair. Folds in the
cam, sketch bounds, sheet's perforation grid and the sketch clipboard
collect one.

Boxes are built from the same terms (a round's box keeps c - r - tol).
As with Aabb3, a NaN point is outside every box and an infinite point
no longer stretches one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel: prism's segment boxes are plain Aabb2s

The SegBox alias named a (low, high) pair; Aabb2 says it itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain::bounds is an Aabb2; the boxes #2382 left as pairs follow

Chain::bounds returns an Aabb2. Its callers keep it: sheet's hole and
cut boxes (loop_box), letter boxes, island outlines and line-near-cut
test use meets, contains and inflated; profile's outline overlap and
max_clearance, profiles' box tests and the cam test read its corners.
flat_size and the flat pattern's JSON size are the union of the loops'
boxes (0 × 0 for no loop, where the pair fold gave -∞).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3::intersection; hand-grown and hand-met boxes use the box

Aabb3::intersection is the box both hold. ops' four overlap boxes of a
boolean's operands take it, and seven boxes grown by hand (ops' body
boxes, the distance set's bounds, coplanar's face box, eval_more's
padded mesh box, compare's group and region boxes) call inflated with
the same amount on every side.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:44:49 +00:00
Thodoris Tsagkogeorgas de7fabc3bc Preferences: a Plugins page lists installed plugin folders (#2718)
* Preferences: a Plugins page lists installed plugin folders

Each folder under the per-user plugins directory that has a plugin.json
appears in Preferences. Turning one off is saved with the other settings.
The page reads the manifest and does not run any code from the folder.

* Retrigger checks after the cancelled run

The required ci check failed because the workflow was cancelled before
any job started. This commit does not change the plugins page.
2026-10-20 03:38:47 +00:00
Igor Bronovskyi 1b6c10f6e0 Translate the Ukrainian catalog messages added after #1632 (#2569) 2026-10-20 03:36:01 +00:00
Nathan Daneandbherbruck 25ea9e6419 icons: add the silhouette master and wire it to inspect.silhouette (#2102)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:25:17 +00:00