Commit Graph
220 Commits
Author SHA1 Message Date
amolinari-autotex aaa35a94d8 Relink a linked assembly source from the Browser (#2772) (#2773)
Thanks @amolinari-autotex.
2026-10-19 07:14:33 -04:00
NOWN-DEV 768e69c4c7 Joints: a new joint between faces that already meet leaves the part as it is (#2709) (#2710)
Thanks @NOWN-DEV.
2026-10-19 05:54:21 -04:00
NOWN-DEV c66e33284b Joints: offsets, angles and values typed as expressions follow their parameters (#2385) (#2386)
Thanks @NOWN-DEV.
2026-10-18 22:13:13 -04:00
leValdemar19andClaude Opus 5.5 86b2b97d6f Sketch Offset: constrain to the ends of an offset spline (#2424) (#2615)
* claim: #2424

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Offset: constrain to the ends of an offset spline (#2424)

An associated offset spline hid all of its generated fit nodes, its two
end points included, so nothing snapped to them, and a curve drawn from
one shared the node and was refused ("invalid offset output point roles").

- An open offset's end points are shown and snapped to again; its
  interior fit nodes stay private.
- After every sketch edit, a curve that took an offset node gets its own
  point there, coincident with the node: the offset keeps sole ownership
  and the curve follows the offset when its source moves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Scenario: lines snap to and close onto an offset spline's ends (#2424)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:43 -04:00
bherbruckandClaude Opus 5.5 2452513b65 CI: faster test shards
- Pull requests that can change a robustness golden check every seed but the 17 slowest, in the
  same nextest run as the other tests instead of a second step after it (16-30 minutes on its own).
  The slow seeds (about four fifths of the goldens' time) still run in the merge queue, on main and
  nightly. A failed golden still prints how to re-record it, and junit.xml now holds the whole run.
- The slowest tests start first (nextest priority), so a shard no longer ends with one of them
  running alone.
- tspline::tests::hostile_tsplines_never_panic joins the heavy tests pull requests skip (up to
  12 minutes on a GitHub runner; the same kind of check as hostile_params_never_panic).
- The ci profile builds dependencies without line tables: the test archive pull requests' shards
  download goes from 3.4 GB to 2.2 GB.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 00:36:14 +00:00
4a4eb59788 3MF import: read objects in other model parts (production extension) (#2089) (#2127)
* claim: #2089

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF import: read objects in other model parts (production extension) (#2089)

Slicers save multi-part projects with the 3MF Production extension: the
root model's objects are components with `p:path` naming another model
part of the package, which holds the meshes. The reader skipped those
components and build items, so such files did not open at all.

Components and build items now keep the part they name, and the parts
objects name are read once each (looked up through an index of the zip
entries), with the number of part names and their total size capped.
Each part's unit is applied as it is read, so parts in different units
fit together. Cycle detection keys on (part, object), so parts that
place each other in a loop are refused.

Tests: components and build items in another part, part names in any
case, a part in centimetres under a root in millimetres, and hostile
packages (missing part, a path out of the package, an empty path, an
unknown object, a part that is no model, a loop between parts, more
part names than a package can hold). The 3MF mutation fuzz also runs
on a production-extension package.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF import: count every placement toward the budget (#2089)

An object that only places other objects added nothing to the triangle
budget, so a few objects each placing hundreds of components multiplied
at every level up to the depth cap (300 components, 3 levels: about 1 s;
deeper never finished). That was already true for one model part and now
reaches across parts. Every placement now costs at least one unit, so
such a file stops at the budget.

Test: six levels of 300 components over an empty object (300^6
placements) stop with a budget error in well under a second; without
the change the test does not finish.

Suggested in review by @jyviko.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 18:10:56 -04:00
6d410c342c Joints: origins on an edge of a face, at its middle or a corner (#2403) (#2404)
* Joints: a face or circle origin keeps its turn as the face tilts

A face- or circle-centre joint origin worked out its frame's x from the normal alone
(`Vec3::any_perp`), which switches axis where the normal crosses 0.9 along X: a part on a face
tilted past about 64° by a parameter spun a right angle about the face. New origins keep the x
they have when picked (`x`, component coordinates) and each solve lays it onto the face as it is
now, so the part tilts with the face without spinning. Origins saved without it are placed as
before.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Joints: origins on an edge of a face, at its middle or a corner

`joint.origin` and `joint.create` take `edge: [x,y,z]` (a point on an edge of a planar face),
with `on` (which face; default the larger planar face beside it) and `corner` (the end near that
point). The origin sits at the edge's middle (z out of the face, y into it) or at the corner (x
and y along its two edges into the face, right-handed whichever way the edges run). The edge, the
face and the corner's other edge are kept by name and found again on every solve, so a part set
40 mm in from a panel's corner stays there when the panel changes size; a name that finds nothing
leaves the joint out with the reason.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 18:10:28 -04:00
fugazister 535a43ab3c Custom colour themes: theme files, Gruvbox built in (#2255) (#2405)
Thanks @fugazister.
2026-10-18 10:01:39 -04:00
CamWight b7a6c68702 Docs: a glossary of SolidCraft's terms (#1569) (#2484)
Thanks @CamWight.
2026-10-18 09:19:22 -04:00
Brazz 07708a4e2a Extrude: a taper composes with a start offset (#2312) (#2313)
Thanks @acbrazzl.
2026-10-18 06:18:43 -04:00
Karl Von Richter 11a196e6f8 sketch(feat): add dimension references and parameter tools (#1548)
Show each dimension's parameter name while creating or editing it, and let
users insert another driving dimension at the expression cursor or selection.
Use the available editor width and keep Apply aligned with the right edge.

Add a tools dropdown with Measure, named user parameter expressions, and
access to the existing parameter table for adding and editing parameters.
Preserve the unfinished dimension expression while either window is open.

Cover reference insertion, dependent updates, parameter selection, dialog
round trips, applying and cancellation with UI integration tests. Update the
parameter guide.

Signed-off-by: Karl Von Richter<karl@embeint.com>
2026-10-18 00:00:35 +02:00
DuBearte 7a3221d2dd Updates: 0.11–0.14 must install 0.15 by hand once (#2136) (#2141)
Thanks @DuBearte.
2026-10-17 17:28:04 -04:00
rpromas 6597ffe072 Self-host the web app with Docker; publish the image to ghcr.io (#2033)
Thanks @rpromas.
2026-10-17 13:49:07 -04:00
CamWight b6f9b1deac Pages links point at docs.solidcraft.io: Flatpak repository, help and troubleshooting (#1922)
Thanks @CamWight.
2026-10-17 07:26:28 -04:00
DuBearte b04e0801d6 Per-command timings for script runs and batches (#1868)
Thanks @DuBearte.
2026-10-17 07:26:20 -04:00
NOWN-DEV 186555dbe9 Clearance report: overlaps, near pairs and nearest bodies (#1900)
Thanks @NOWN-DEV.
2026-10-17 04:54:39 -04:00
DuBearte fd073620ae Sketch: Explode Text turns a text's outlines into ordinary curves (#1842) (#1921)
Thanks @DuBearte.
2026-10-17 04:52:41 -04:00
Mateusz Sych ff7f3204d5 Updater: recognise an MSI install outside Program Files (#1870) (#1873)
Thanks @SychPL.
2026-10-17 04:08:46 -04:00
Karl Von Richter 3689f0d6e5 ui(feat): open expression suggestions with Ctrl+Space (#1852)
Thanks @Karl-VonRichter.
2026-10-17 04:07:56 -04:00
Irakli Kourtis 7ba2d5db47 Robustness goldens: one test per seed, so CI spreads them (full runs ~33 → ~15-20 min) (#1851)
Thanks @jyviko.
2026-10-17 04:07:43 -04:00
Mateusz Sych f350c35414 Expressions: a mixed number such as 2 1/8" is 2.125" (#1802) (#1820)
Thanks @SychPL.
2026-10-17 04:07:19 -04:00
selune 37496198bf Merge pull request #1712 from SychPL/feat/motion-analysis
Motion analysis: chart a study's joints and points, and find the parts that collide along it
2026-10-17 00:09:37 +02:00
Dante d357bd2073 docs: update public links and custom-domain Pages paths (#1780) 2026-10-16 16:39:59 -04:00
MateuszSychXpl c34e607f5b Motion analysis review round 3: ui.start reads a study as motion.study does, keys off the timeline refused, pairs counted once, sub-assembly copies documented 2026-10-16 17:52:39 +02:00
MateuszSychXpl 7119d60d9d Motion analysis review round 1: unwrap only followers and past half a turn, studies by id, refuse keys between steps, count mesh placement work, duration checked in the dialog, Browser joint pick charted 2026-10-16 17:52:39 +02:00
MateuszSychXpl f5871608f4 Motion analysis: scripting handles, depth wording, one hit per member pair a sample 2026-10-16 17:52:39 +02:00
MateuszSychXpl 8fdf6a61a2 Motion analysis: plots of a study's joint values and a point's path, and the parts that collide along it
- motion.plot: joint values and a point's path sampled as the study plays (closed loops
  following), with velocities and accelerations by finite differences, per step or per
  second with a duration.
- motion.interference: the pairs of parts that pass through each other along a study, with
  the first step, the step ranges, the depth and the shared volume; occurrences, against
  or contact sets choose the pairs; bounded samples and work.
- Motion Study dialog: a Study box opens a saved study; a chart of a joint value or a
  picked point with a cursor at the step shown (click to move there); Check collisions
  with the steps shaded on the chart. ui.start motion.study takes study.
2026-10-16 17:52:38 +02:00
Mateusz Sych 6232fa33c2 Joints: cam and follower coupling (joint.cam) (#1734)
Thanks @SychPL.
2026-10-16 10:26:35 -04:00
Mateusz Sych 2ae21143ee Motion animation export: a study or a joint drive as an animated GIF (#1680)
Thanks @SychPL.
2026-10-16 07:26:15 -04:00
bherbruckandClaude Opus 5.5 a9beb437b3 Boolean property tests: nightly only, and the cases they found as ignored tests (#1650)
Pushes to main skip boolean_props (random inputs); the nightly property-tests job runs it. The three shrunk cases are ignored tests with their issues (#1647, #1648, #1649), and proptest's failure file is named outright.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-16 04:35:53 -04:00
Lasse Lian 18ec44d773 AppImage: leave the menu entry to launchers that set DESKTOPINTEGRATION (#1635)
Thanks @lasselian.
2026-10-16 03:26:09 -04:00
Mateusz Sych 571122c4ba Motion Trace: a point's path as a joint is driven or a study plays, kept as a 3D spline (#1529)
Thanks @SychPL.
2026-10-16 01:54:34 -04:00
Karl Von Richter 371578a06f Feat/Sketch: associative pattern tools with independent directions and Flip/Center controls (#1601)
Thanks @Karl-VonRichter.
2026-10-16 00:32:32 -04:00
DuBearte ac3a25fb5b View keys: arrows turn the view, Ctrl+arrows pan, Ctrl+8 looks at the selection (#1541) (#1585)
Thanks @DuBearte.
2026-10-16 00:27:12 -04:00
H. Conrad c5b7009ce3 ci: nightly property tests with more cases (#1498)
Thanks @Ian-cmd-ops.
2026-10-16 00:13:48 -04:00
bherbruck 6c1a898e3d Check for updates at every start; show "Update to X" as a title-bar pill (#1538)
Thanks @bherbruck.
2026-10-16 00:07:41 -04:00
Mateusz Sych 4d862cd76c Joints: joint.reach (inverse kinematics), and a jointed part follows a drag (#1540)
Thanks @SychPL.
2026-10-15 23:58:34 -04:00
Irakli Kourtis 1a0b33fcf3 Headless pictures draw on the GPU, with the viewport's pipelines (CPU rasterizer as last tier) (#1555)
Thanks @jyviko.
2026-10-15 22:19:26 -04:00
bherbruckandClaude Opus 5.5 9a07932f20 Design format: a change is one new file, never an edit to FORMAT (#1563)
A PR that saves something new adds crates/doc/src/format/pending/<name>.rs (a note, and an upgrade step if older designs must be rewritten). The build writes the next format number while changes are pending and lists them in format_pending; scripts/fold-format-pending.sh fixes them as v<N>/ at release time. Formats 23 and 24 move into v23/ and v24/.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 21:13:38 -04:00
4cbf9cf607 Sheet metal: an Edge Flange can choose its own corner relief (#1481)
An Edge Flange feature can set the shape and size of the relief at the corners its flanges make, in place of the sheet metal rule's. Design format 24.

Co-authored-by: NOWN-DEV <NOWN-DEV@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-15 20:22:31 -04:00
Jackson OurslandandClaude Opus 5.5 78242d67d1 Import FreeCAD and Rhino files through cadmpeg (#1435)
FreeCAD .FCStd and Rhino .3dm files open, insert and drop like STEP and IGES:
cadmpeg (Apache-2.0, pinned =0.6.1, native builds only) detects the format,
decodes it under its service resource caps, validates the model and writes it
as STEP AP214, which becomes an Import feature in a new component named after
the file, with the up and names options.

Only the fcstd, rhino and step codecs are compiled in (no default features).
ACIS is left out: cadmpeg's sat codec is a ShapeManager stream decoder.
native_cad.rs is the single importer seam. Self-made FreeCAD and Rhino box
fixtures, hostile-input, ZIP-bomb and cap tests, engine tests for the
component path; the browser build reports these formats as not supported.
A note under design format 23 says an Import's file can name these formats.

Co-authored-by: Jacob Oursland <jacob.oursland@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 19:30:03 -04:00
96d1ad0ab2 Show optional X/Y/Z distances in measurement overlays (#1422)
Measure can show the world-axis components alongside the total distance, with a Graphics preference to turn them off.

Co-authored-by: cronos <19868002+crono2250@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-15 19:09:26 -04:00
f7967b1ff6 Joints: gears, rack and pinion, and screws (#1524)
Motion links can carry a coupling (gear pair, rack and pinion, screw) whose ratio follows radii, picked round faces or pitch. Design format 23.

Co-authored-by: SychPL <SychPL@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-15 18:47:38 -04:00
a519f3cf74 Web app: 3D mouse navigation through the Gamepad API (#1473)
The web app reads a 3D mouse through the Gamepad API and drives the camera through navigation::device, so it follows each page's navigation capabilities (#1336).

Co-authored-by: CamWight <CamWight@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-15 18:42:44 -04:00
bherbruckandClaude Opus 5.5 a13124acdd Import glTF 2.0 files (.glb, .gltf) as mesh bodies (#1512)
glTF files open, insert and drop like 3MF/STL/OBJ: a component named after the file, the node tree as nested rigid components, repeated meshes as occurrences, metres to mm, Y up turned to Z up by default (up: z keeps axes), materials as PBR appearances. Bounded, hostile-input tested reader; no new persisted data. Closes #1505.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 17:27:29 -04:00
NOWN-DEVandNOWN-DEV b6806b16cf feat: a sketch text's height, place and angle can be expressions (#1453)
A sketch text's height, place (x and y) and angle can each be an expression over the design's parameters, and the text follows parameter changes, undo and reopening. Closes #1362.

Co-authored-by: NOWN-DEV <NOWN-DEV@users.noreply.github.com>
2026-10-15 14:57:36 -04:00
bherbruckandClaude Opus 5.5 2d069ca186 In-app agent chat: your own coding agents over ACP, plus OpenAI-compatible endpoints (#1102)
* Agent chat prototype: drive an ACP agent the user already has from a side panel

A desktop-only chat panel (off by default) that starts a coding agent over the
Agent Client Protocol and gives it SolidCraft's MCP server, bridged to the open
window through the token-protected control channel with the default folder
limits. It finds installed agents (Claude Code and Codex adapters, Gemini CLI,
Copilot, Qwen, OpenCode, goose) with version and login state, streams text,
tool calls and plans, shows the agent's permission requests, and when an agent
isn't signed in shows its own login methods without handling any credential.

Design notes and findings: docs/design/in-app-agent-chat.md.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs: say only what the end-to-end run showed

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: gate, one undo per message, docking, process groups, discovery polish

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: Settings → AI, several agents with a switcher, OpenAI-compatible endpoints, permission modes, toolbar button

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: translations, tool cards, Add agent dialog fixes, test agent saves on its own

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: third-party licences for the keychain crates; clippy

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: badge text from the theme tokens

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: Auto-allow model edits is the default permission mode

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 14:22:38 -04:00
Mateusz Sych 29e72806f6 Context menus stay in view near the window edge; planes offer Create Sketch (#1398)
List menus open below-right of the cursor and flip to end at the cursor where they don't fit (shared context_menu::place / show for viewport, browser, toolbar and Select Other). Right-clicking a plane in the viewport, a construction plane row or an origin plane row (new menu with Create Sketch and Show/Hide) offers Create Sketch on that plane. Fixes #1354.
2026-10-15 12:47:15 -04:00
Lasse Lian fb55c1341a AppImage: no desktop entry when appimaged made one or integration is switched off (#1406)
AppRun installs nothing when an appimagekit_*.desktop entry for the same AppImage exists, and removes the entry it wrote earlier. An empty ~/.local/share/solidcraft/no-desktop-integration turns the integration off for good; SOLIDCRAFT_NO_DESKTOP_INTEGRATION=1 still works. Getting-started guide documents it. Fixes #1399.
2026-10-15 12:46:53 -04:00
NOWN-DEV d0a4443939 inspect.compare: where two versions of a part differ, without a boolean of the two (#1423)
New command inspect.compare {a, b, tolerance?}: measures of both and their differences, two-way surface deviation from a bounding-volume tree, regions beyond the tolerance clustered by side (only_in_a / only_in_b) with integrated volumes and faces, a verdict, optional face colouring as one undo step, and warnings for open meshes. Geometry in solidcraft-geom (compare.rs), command in the engine. Closes #1363.
2026-10-15 12:45:43 -04:00