* claim: #2987
* Flange on a plain solid says how to start sheet metal (#2987)
Flange, Flat Pattern, and Export DXF on a design with no sheet metal body
now say how to make one: Flange > Base, or Convert to Sheet Metal on a
plate's large flat face. An edge flange checks for a sheet metal body
before it adds a feature. The message is in the catalogs, and engine
messages that match a catalog entry are shown in the interface language.
* Dialogs show a refusal without the engine's parameter prefix (#2987)
The Flange dialog showed "invalid parameters for `sheet.flange`: " in front
of the new guidance. The dialog already names its command, so the red
refusal text leaves that prefix out and follows the interface language
when the message is in the catalogs. Create Issue still gets the full text.
* claim: #4880
* Rename a body: keep the names of siblings a later feature removed (#4880)
Renaming a body sets the stored names of all bodies its feature made, so
the siblings are not renumbered. Those names were read from the final
model, where a body that a later feature removed no longer exists: its
stored name was lost, it came back as `Ext (3)`, and the later Remove
failed with "no body `Body3`". Read the siblings from the feature's own
result instead, as the later features already are.
* Test: renaming one half of a split leaves the other
Renaming one half keeps the other half's name, also once a later feature
joins that other half away, after both an incremental and a full
evaluation.
Dropping a feature just behind the history marker now rolls it back, and
dropping it just before the marker makes it active again, in both the
bottom strip and the left panel. timeline.reorder and timeline.move_many
take an optional `active` param that sets the marker in the same command,
so the move is one undo step and one recompute. A position on the wrong
side of the marker for the requested `active` is refused.
Drop feedback:
- bottom strip: the drop line sits centred between two features (it
used to touch the previous one) and shows at the first position
(it used to be drawn outside the strip there)
- left panel: a drop slot below the marker when it is at the end
- no drop line when the marker is dragged back to where it is
- a dragged feature is outlined in the drop line's green
- grab cursor on the marker, grabbing cursor while dragging the marker
or a feature
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4585
* Sketch drag: a linkage held by redundant parallelograms still moves (#4585)
Cursor motion looks for the sketch's freedom in the null space of the
constraint Jacobian. Redundant constraints (a parallelogram held both
parallel and equal on each pair of sides) are dependent only at an exact
solution; after a correction to the solver's tolerance their rows differ
by about 1e-9, which the 1e-9 pivot tolerance counted as rank, so the
null space came out empty and a one-DoF linkage stayed locked. Use the
rank analysis' 1e-7, so the drag sees the freedom the sketch reports.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5022
* Plastic features: refuse sizes under 0.01 mm (#5022)
A snap fit with a near-zero thickness (1e-9 mm) got past the size checks,
which only asked for a positive number, and panicked in the kernel's
intersection code. The boss, lip, groove and rest had the same gap.
Every length of a plastic feature that becomes geometry (snap fit length,
thickness, width, catch_depth and catch_length; boss diameter, height,
hole_diameter, hole_depth and rib sizes; lip and groove width and height;
rest width, length, height and thickness) must now be at least 0.01 mm.
The check sits where the feature is evaluated, so a parameter changed later
is refused the same way, and the message names the parameter.
* claim: #5023
* Extrude and loft: refuse repeated profile indexes (#5023)
`profiles: [0, 0, ...]` with 10 000 copies built 10 000 identical bodies in
about 35 s, and a loft section listing one profile 10 000 times took 25 s
before it was refused.
A list of profile indexes now refuses a repeated index while it is parsed
("profile 0 is listed twice"), as offset association ids already were.
Before the profiles are resolved, a selection naming more profiles than its
sketch has, an index the sketch doesn't have, or two points in the same
profile is refused too. A design file that repeats an index still opens,
using the profile once.
Coincident with two circles (or arcs) picked was refused: "two curves must both
be straight lines; otherwise choose a point and a curve". It now lays the second
pick on the first: Concentric and Equal together, in one step, with the first
staying put. A pair already concentric or equal gets only the other half; one
already lying on the other is refused as nothing to add.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* A renamed body keeps its number (#4957)
The design's body counter starts over at every evaluation, so a body
renamed after a join (the join changed it, so the rename cannot be
followed without evaluating the design again) gave its number back: the
next body took the name the rename freed, and a script that names a body
found another one.
The design now saves the names a rename freed, and the counter skips
them.
* A renamed body keeps its number (#4957)
The design's body counter starts over at every evaluation, so a body
renamed after a join (the join changed it, so the rename cannot be
followed without evaluating the design again) gave its number back: the
next body took the name the rename freed, and a script that names a body
found another one.
The design now saves the names a rename freed, and the counter skips
them.
* Format
* claim: #5087
* view.apply: keep the camera's roll, and refuse an up axis (#5087)
An explicit camera was read as a named view, which has no roll or up, so
roll was silently reset to 0 and up was ignored. Read roll as a finite
number in radians, clamped to ±π, and refuse up with a message saying the
up axis comes from the design settings.
The component's sketches, features, bodies, subcomponents, the joints among
them and the parameters they use move to a new .solidcraft design, keeping
their ids and names, and the component becomes linked to it as Insert Design
makes it. The new design must build the same bodies and the assembly must
look the same afterwards, else nothing changes and no file is written. Joint
faces on the component are found again on the linked bodies, and components
that build the same bodies can become placements of the link.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A STEP file inserted into a new design sits in its own component under the
empty root, and a sketch on its face must join that part going out and cut it
going in rather than make a separate body beside it. With a distance, main
already resolves this; Through All with no distance gave `auto` no reach to
probe, so it fell back to New Body and cut nothing. Through All now reaches
past every body in its direction, and `auto` reads it as a cut (#1234).
Co-authored-by: Steven <steven2021067613@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5172
* Extrude without profiles keeps nested loops as holes (#5172)
With no `profiles`, solid.extrude took every region of the sketch, so
circles drawn inside a plate outline were extruded as well and filled the
plate's holes. The default now applies even-odd nesting to the drawn
profiles: a loop inside an outline is its hole, a loop inside that hole is
material again, and separate outlines all extrude. Sketches without nesting
keep the `all` selection, and explicit `profiles` (including "all") are
unchanged. Saved designs store their selection, so they recompute as before.
* claim: #5174
* component.create refuses parameters it does not take (#5174)
A call with `bodies` (or a misspelled key) used to succeed and make an empty
component. Unknown keys are now refused before anything changes, the error
lists the accepted parameters, and `bodies` points to component.move_bodies
and component.from_bodies.
* claim: #5175
* Joints: a joint origin's name given as a face says to pass it as the origin (#5175)
When the name in `face` or `circle` matches no face but is a joint origin,
the error now says so instead of "no face is named".
* Add the format registry: one table of formats, extensions and options in crates/io.
The hosts' Open-dialog filters and the web accept list derive from it, and
registry tests pin it to the path predicates and the command docs.
* Fix format-registry tests that compared FormatSpec without Eq.
assert_eq on Option<&FormatSpec> does not compile; the none cases
only need is_none, matching the other rows that compare ids.
* claim: #5248
* feat(motion): regenerate kept traces when source inputs change
* feat(motion): add a parametric Chebyshev trace demo
* perf(joints): reuse face measurements across motion samples
Face-centred joint origins called Body::faces on every solve, bypassing the
reference-mesh reuse used for rigid placements. Share face measurements with
unchanged model geometry at the existing tolerance, while guarding replaced
bodies and applying offsets after the cached measurements.
Cover repeated named/nearest-face solves, shape edits, retained snapshots and
direct replacement with deterministic work counts. The 145-point Chebyshev
dimension and range updates retain identical sampled and interpolated curves.
* perf(naming): skip preparation for cached face names
Both face lookup paths spawned fresh workers over every body even when their name cells were ready. Prepare only cold cells, with direct handling of zero or one cold body. Preserve the existing parallel naming path and all face selection semantics.
Deterministic regressions cover repeated picked and unique-name lookups, misses, partial warmup, renames, snapshots and moved copies. Release Chebyshev medians fall from 859 to 50 ms for a dimension edit and 871 to 34 ms for a sweep edit; all 145 samples and interpolated points remain identical. Full cargo xtask ci passes with RUST_TEST_THREADS=4 and the existing local Windows validation overlays.
* claim: #5150
* Stand it up: don't offer it for SolidCraft's own STEP files (#5150)
STEP replies from file.insert_step and doc.open now carry the file's
originating system, and the window skips the stand-up offer when it is
exactly SolidCraft, as SolidCraft's STEP export writes it.
* Stand up Y-up STEP and IGES files from SolidWorks automatically
The STEP header (originating system, preprocessor version, FILE_DESCRIPTION) and the IGES
global section's native system ID say which program wrote a file. A SolidWorks header means
Y up: the import's component is stood up as it opens, as one undo step, and the message offers
Undo. SolidCraft's own files are left alone; an unknown exporter keeps the offer.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Ray <raykholo@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #3567
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Yz6dHZiXcgTgrxjVNC6hx
* Edit Offset Plane: keep a face base, refuse a plane on itself (#3567)
Reopening an Offset Plane built on a face looked the face up at the
plane's origin, which can lie off the face, so the Plane input came up
empty. Look it up at the point picked on the face. A redefine that
builds a feature on itself is refused with a plain message instead of
failing with "plane offsets nested too deeply".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Yz6dHZiXcgTgrxjVNC6hx
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2874
* Sketch fillet and chamfer refuse an offset's corners (#2874)
An analytic offset's output ends are recomputed from its source curves on
every solve and held fixed there. Filleting an output corner moved those
ends to the tangent points, the next refresh pulled them back to the sharp
corner, and the new arcs closed into full circles with the sketch left
unsolved.
Fillet and chamfer now refuse a corner on an offset output before anything
changes (a batch fillet applies all of its corners or none) and say how to
get the rounded result: round the source corners before offsetting, or
break the offset association first, after which the same corners round
normally.
* claim: #2885
* Circular Pattern and Revolve: a construction axis can be the axis (#2885)
The dialogs send a picked axis by its name, but solid.pattern.circular
only knew X, Y and Z, and solid.revolve / surface.revolve read any other
name as a sketch line id. Picking a construction axis therefore failed.
- solid.pattern.circular takes a construction axis name, saves it as
`axis_feature` and turns about the axis as evaluated, so the copies
follow it when it is edited.
- AxisRef::Construction { name } for revolve and surface revolve,
resolved at evaluation and checked to lie in the sketch plane.
- construct.plane.at_angle accepts a construction axis name (its fixed
axis line is taken from the axis as it is now).
- Reopening these features shows the construction axis as the pick.
- Design format: pending/construction-axis-refs.rs.
* Construction axis references follow the axis in the feature's component frame (#4506)
- Revolve, Surface Revolve and Circular Pattern resolve a construction axis
where it is evaluated, mapped into the feature's component frame.
- A line of the revolved sketch with the same id as a construction axis
still wins, so existing scripts keep their meaning.
- Tests: the revolve keeps the reference through save and reopen and
follows an edited axis (60π to 80π mm³); perpendicular, offset and
profile-crossing axes are refused without changing the design.
* Joint drive moves parts without evaluating them
A joint drive (also the Drive dialog and motion steps) changes only occurrence transforms, yet it
re-evaluated nearly the whole timeline: every feature that might read another component's
geometry (a sketch with any link, even to its own axis) hashed every occurrence's transform into
its fingerprint, so any motion invalidated it and everything after it, and no new pose was ever
in the cache.
- Placement digest: a feature now hashes only where the geometry it actually reads lies relative
to its own frame (link sources, anchors, profiles and paths from other components, mirror
placements; To Object and face/edge-picked planes read every component, relatively). Moving
parts that keep those relative placements leaves every result in place: nothing is evaluated
or re-meshed. In-context features whose referenced part really moved still rebuild.
- Evaluated ahead, applied once: `Ahead::evaluate` returns what it evaluated and
`Session::prime` lets the window-thread pass take it (history commands and dialog OK), so an
off-thread command no longer costs twice on designs past the cache's budget.
- Contact meshes are kept per body geometry across drives.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Joint drive: booleans read only their input bodies' placements
A join, cut or intersect with named targets, and a Combine, read every
placement, so a joined part transferred to a component re-ran its boolean
at each new joint pose. Each now hashes only the placements of the bodies
it actually takes as inputs, resolved in its timeline input state (before
any later BodyTransfer), relative to the frame that evaluates it; Combine
reads its tools relative to its target. Unresolved and legacy component or
path reads keep the conservative dependency. 24 new joint_pose_ tests
cover new angles, transfers, targets, save/reopen, undo and real relative
motion (900 -> 800 mm3).
Supplement offered on #3397 by takuto-NA.
Co-Authored-By: takuto-NA <183465875+takuto-NA@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Creating a component recomputes nothing
A new, empty component changes nothing a feature reads, yet it changed
the placement fingerprint of every targeted boolean, Combine and To
Object feature, so `component.create` evaluated the timeline again:
- the first component of a design: `placement_digest` returned 0 while
the design had no placements and a nonzero value once it had one;
- To / From Object and legacy face- or edge-picked planes hashed every
component, not just those holding the bodies, sketches and
construction geometry the feature can reach.
Co-Authored-By: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Test: creating a component after a legacy face sketch recomputes nothing
A face extruded after its construction certificate is gone (a patterned
cut, a pad joined flush with it, then one more cut) is sketched on a
legacy face plane, which reads every placed body. A new, empty component
must not change what it reads either (reported by Tyler Chiriboga).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: takuto-NA <183465875+takuto-NA@users.noreply.github.com>
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Every edit clones the document for undo, and `MeshData`'s positions and
triangles (plain `Vec`s) were copied with it: ~165 MB a command for a 2 M-
triangle STL. They are now `Arc<[f64]>` and `Arc<[u32]>`, shared by clones;
the few places that rewrite them build new arrays. Saved designs are
unchanged (an `Arc<[T]>` serializes as the array).
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* claim: #4616
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: draw a part placed many times from one copy of its triangles (#4616)
A part placed by many occurrences was drawn, framed and picked from a moved
copy of its mesh per placement: on the CPU (the moved mesh and its scene
bytes) and on the GPU (its vertices uploaded once per placement).
- The model scene draws bodies that share a mesh as GPU instances: the
shared triangles once, a rigid move and colour per placement
(`InstancedMesh`, `vs_tri_inst`), in the solid, section and AO passes.
`GpuScene::merged` expands them, so scene tests see world triangles.
- `ModelBody::mesh_in_place`, `plan_mesh_in_place_at`, `mesh_bounds` and
`display_identity` give the shared mesh, its placement, the exact box and
an identity without making the moved copy.
- Display refinement's body ids, Fit/Home bounds, the viewport's body boxes,
the background mesher and picking use them (picking moves the ray into
the part's frame and shares one pick index).
25 placements of a 2 M-triangle STL on an M2 Max: orbit 45 -> 37 ms a
frame, footprint 41 -> 16 GB, 24 copies 39 -> 18 s.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: draw large meshes from shared, indexed vertices (#4637)
An instanced mesh's vertices are shared between its triangles and drawn
indexed (`SharedTris`). A flat-faceted mesh (an STL's facets) shares them by
position alone and lights each fragment with its triangle's own plane
(`vs_tri_inst_flat`, `fs_*_flat`), taken from the fragment's position
relative to the eye so it stays exact at any zoom; its vertex outputs are
kept few, since a tiled GPU stores every vertex's outputs. A body alone is
drawn this way from 50 k triangles. A mesh too large for one buffer falls
back to unshared vertices.
`instanced_scene_gpu_benchmark` (manual, ignored): 25 placements of a 2 M-
triangle STL at 3600 x 2190 px, 4x MSAA, M2 Max: 21.3 ms a frame for the
placements' own triangles, 16.1 ms shared and indexed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: leave out placements of an instanced mesh that are out of view (#4646)
Each frame `Batches::cull` keeps the placements whose box may be seen
(`placed_box_in_view`: all eight corners past one side of the view in clip
space, so it holds behind the eye too) and writes them again only when
that set changes. The manual benchmark gains `SOLIDCRAFT_BENCH_CLOSE=1`:
close up on the middle of 25 placements of a 2 M-triangle STL (13 in
view), 3600 x 2190 px, 4x MSAA, M2 Max: 28.2 ms a frame for the
placements' own triangles, 17.2 ms instanced and culled.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover
* Vertical history strip: seam handle to expand and collapse names, drag to resize with snap
* Vertical history strip: no empty gap below the transport
* Show the history seam arrow only on hover (#2028)
* claim: #2021
* Redesign the Assistant chat panel with shared UI components
* Show Assistant in the shared floating panel shell
* Extend floating Assistant to viewport height and shift navigation
* Dock Assistant before history and match docking preview bounds
* Align Assistant top margin with floating shell cards
* Extract a shared panel drag grip
* Rebuild responsive history sizing and three-way docking
* Share browser and History collapse hover styling
* Show the History title as soon as its text fits
* Animate stacked browser and History expansion and collapse
* Make panel folding responsive and independent of frame delays
* Let folding panel contents shrink continuously to header height
* Use four explicit History transport actions in every layout
* Resize the shared Browser and History column from either card
* claim: shared compact-mode containers (#2029)
* Centralize layout-aware UI containers and enforce their use
* Keep docked Assistant at the outer edge beside tool sheets
* Use shared surface policy for Assistant tool space
* Let tool sheets drag over shell panels while avoiding Assistant
* Update Parameters drag bounds assertion for shell overlap
* Keep dragged tool sheets below ribbon and workspace selector
* Enforce universal UI containers in mandatory repository checks
* Remove legacy report windows and require shared window composition
* Remove retired UI styling and require shared controls
* claim: compact layout preference (#2029)
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Navigation: opt-in free orbit and shared Normal to Selection
Preserve the complete reviewed feature, shared camera setting propagation,
rigid pivot behavior and focus/drag regressions from PR #1912.
Consolidate the prior main-integration commits before rebasing, so their
merge-resolution fixes remain in the linear feature history.
* docs: move free orbit help beside viewport controls
* Merge main into fix/solidworks-free-orbit
Camera animation is gone on main, and with it the orbit snap spring: the Shift
snap keeps its unsnapped orbit in orbit_free, which the free-orbit checks now read.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #3708
* Export Current View as DXF includes shown sketches (#3708)
The view export refused a design with only a sketch and left shown
sketches out when bodies were present. It now draws the sketches the
viewport shows (profile curves only: no construction geometry, points,
dimensions or constraints) on a SKETCH layer, one entity per curve.
Finished sketches are hidden behind bodies through the body-edge
occlusion; the active sketch is drawn on top, as in the viewport.
Sketch points use the same projection, budgets and cancellation.
The export is refused only when there is neither a visible body nor a
shown sketch curve; the dialog and the command share that check
(cmd::view_dxf_exportable).
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch Dimension: `name = value` defines a user parameter (#2916)
In a dimension's value (the D tool's box, and `sketch.dimension`'s `value`
from scripts, the CLI, MCP and the control channel), `name = expression`
adds the user parameter `name` with that expression and dimensions with
`name`: typing `width = 40` on a line gives a 40 mm user parameter `width`
and a dimension whose expression is `width`. A bare number is read in the
design's unit, as a bare dimension value is; an angle's parameter is in
degrees. The expression may be anything the parameter editor takes.
It is one command: one undo removes the parameter and the dimension
together, and a dimension the sketch refuses leaves no parameter behind.
A taken name is refused with a hint (type the name to use it, or change
it in Parameters), a reserved name with the parameter editor's message,
and a left side that is not a name (`2 = 3`) still fails to parse as
before. A driven dimension defines nothing. The reply carries `defined`,
and the status line names the parameter.
The splitter lives in the doc crate (`expr::definition`) so other value
inputs can take the same form later; editing an existing dimension, the
inline shape boxes and feature dialogs are follow-ups.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Sketch Dimension: say why a name is refused, in the command's own words (#2916)
The dimension editor showed a refused definition raw, in the box and the
status line: "invalid parameters for `sketch.dimension`: value: `mm` is a
unit, constant or function name". It now reads "Sketch Dimension: `mm` is
a unit name, so it cannot be a parameter name": the editor passes the
command's errors through `friendly_error` like every other command, and
drops the `value:` field tag, since the box is the value. The taken-name
hint reads the same way: "Sketch Dimension: there is already a parameter
`w`: type `w` to use it, or change it in Parameters".
A reserved name says what kind of word it is and what that means
(`param_name_problem`, shared with the Parameters dialog): a unit name, a
function name, or a constant, "so it cannot be a parameter name";
`expr::reserved_kind` tells them apart.
`friendly_error` translates the command label with the interface language
(the engine's sentence stays English), so the prefix reads "Wymiar szkicu:"
in Polish.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Sketch Dimension test: keep the third line off the ribbon (#2916)
On current `main` the ribbon floats over the top of the canvas, and the
test's third line at sketch y = 50 projected under it: the click opened
Parameters instead of picking the line. The line now goes below the
first one.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #3085
* Extrude preview: a cut from an empty root is not refused (#3085)
A cut or intersect sketched where the active component has no body of
its own (the root of an assembly, or of a design whose part was
imported into a component) takes part in every body (#1234): the
command makes the cut. The Extrude preview checked the targets itself,
looked only in the active component, and showed "there is no body to
cut or intersect" beside a tool going through the part. Pressing OK
still cut, so the dialog said one thing and the model another.
The rule now lives in one place, Session::cut_takes_every_body, which
both the command and the preview ask, so they cannot disagree again.
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover
* Vertical history strip: seam handle to expand and collapse names, drag to resize with snap
* Vertical history strip: no empty gap below the transport
* Show the history seam arrow only on hover (#2028)
* Extract a shared panel drag grip
* Rebuild responsive history sizing and three-way docking
* Share browser and History collapse hover styling
* Show the History title as soon as its text fits
* Animate stacked browser and History expansion and collapse
* Make panel folding responsive and independent of frame delays
* Let folding panel contents shrink continuously to header height
* Use four explicit History transport actions in every layout
* Resize the shared Browser and History column from either card
An offset's output curves have their ends recomputed from the source
curves on every solve. Trimming a piece off one reported success and left
the curve whole, because the refresh pulled the new end straight back.
Extending one was refused as "connected to other geometry", which does not
say why. Both now refuse with the reason and the way out: edit the source
curves, or break the offset association first. Trimming away a whole
offset curve, which removes it from its association, still works.
The fuzzer chamfers randomly picked edges and expected every chamfer to
shrink the body, so a chamfer of a concave edge, which fills the corner,
was reported as a wrong volume: 53 of the 6,000 designs of a run (seed
7100465: a box, a shell, a chamfer of an inside edge). Fillets already
expect any volume change for the same reason; chamfers now do too.
The regression test checks both directions on a shelled 20 mm box (an
inside-edge chamfer of 1 mm adds 8 mm³, an outside one takes 10 mm³
away) and that seed 7100465 is no longer a volume finding.
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3099
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Centre circle: a second click snapped to a point keeps the circle on it (#3099)
The tool sent the centre's snap reference but only a radius for the
second click, so a circle drawn from a line's midpoint through its end
was left free to change size. sketch.circle.center takes through: a point
reference, kept on the circle (PointOnCurve), and the tool passes it when
its second click snapped to a point.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* solid.mirror: copies join their source's component; follow the saved placement
Three follow-ups to mirroring bodies of placed components:
- A copy joins the component of the body it mirrors (or, when that
component is placed more than once and a copy there would show at
every placement, the innermost component around it placed once), so
checks that group bodies by component see it beside its source.
- The saved placement path, not the body's name, says which component
a mirrored body is in: inserting the same file again reuses the body
names, and the copies of the first insert vanished.
- The mirror is evaluated again only when its own placements or its
component's frame change, not on every occurrence move: each later
command paid for one more mirror evaluation.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* solid.mirror: a saved placement must still lead to the body's component
A stale or edited placement path that leads to another component's
occurrence mirrored the body silently where that other component is
placed. The mirror now reports that the placement no longer exists.
The body's component comes from the evaluated body where a transfer
recorded it, else from the component its name is recorded in or its
feature's. When a later insert of the same file has taken over the name
(the recorded component lies outside the components the body's own
feature made), the placement has to lie inside those components instead,
so mirrors of the first insert keep working.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* solid.mirror: the copies' component change is a pending format change
v26 shipped in 0.15.0, so its mirror-placements note stays as released;
the change of where a Mirror with placements puts its copies is noted in
a new pending file instead.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Revert "Start page: sample pictures and the existence check of recent files run off the window thread (#4295)"
This reverts commit d9059d8da5.
* Test: an older design is marked format 28 now that 0.18.3 folded face pieces into 29
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Thread: turn a shaft thicker than a modelled thread down to its major diameter
A modelled external thread on a shaft thicker than the thread no longer refuses: the shaft
is turned down to the major diameter over the threaded length (run past a free end of the
face), then the thread is cut as before. The turned face is named F<n>:turned and the step
it leaves F<n>:shoulder:start/end. A shaft the part goes on around is refused rather than
cut into, shafts under the minor diameter and cosmetic threads on thicker shafts are still
refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Thread preview test: an 8 mm shaft is turned down for M6; M10 still refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Face names: pieces of a split face keep their numbers across evaluations (#3902)
Pieces sharing a name were numbered in the kernel's order, or by the index of the operand face
they came from. A boolean can list its result's faces in another order on the next evaluation,
and an operand made by one (a closed sweep tool) carries that order into the indices, so the
#1/#2 of a split face could swap between two evaluations of the same design. Pieces that
nothing else tells apart are now numbered along the spread of their centres (as edge pieces
already were), and pieces from different faces of one operand by kind, then by place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Face names: older designs keep the piece numbers they were saved with
Numbering pieces by place renumbers split faces in many existing designs, and a stored name
matched exactly would then land on the other piece. Features of a design saved before this
change are marked `kernel_piece_order` by a pending format step and number their pieces as
before; features added afterwards number by place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
An agent's design changes over the control channel (engine.execute, engine.batch) are evaluated
ahead on a copy of the session on an `agent` worker, then run on the window thread reusing every
feature computed there (doc::KeptResults, whatever the bounded evaluation cache dropped); the
worker also makes the display meshes of the bodies they end with. Exports run on a copy. While a
change computes, or the agent cursor acts one out, ui.*, inspection and screenshots answer; later
design changes wait their turn. A chip names the command with Stop. A person's edit meanwhile goes
first; a replaced design refuses the request. Preference: Preferences > AI, agent_off_thread, off
by default.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2882
* Holes from a sketch on a body's face drill that body (#2882)
A multi-point hole from a sketch attached to a body's face chose its
side and moved its points onto whichever body lay along the direction,
then cut every body, so points on a front body's face could drill the
body behind it. `targets` was accepted and ignored.
- solid.hole: holes at the points of a sketch on a body's face store
that body as their participant (the lookup a face-sketch Join uses);
`targets` sets the bodies to drill, `["*"]` every body; explicit
participants still override.
- Evaluation: for sketch-point holes with participants, the drilling
side, the surface each point moves onto and pattern copies are found
on those bodies only.
Sketches on planes, position and Single holes, and saved holes without
participants recompute as before; no design-format change.
* Measure: a body whose meshes leave a gap keeps its volume wherever it is
A part ring cut by solid.combine (two prisms through its ends, a notch
through its chamfer) measured 992.03 mm3 at the origin, 999.17 moved
100 mm and 1063.48 moved 1000 mm; it encloses 993.92. The reference
mesher leaves a crack where the notch meets the chamfer's cone: the
volume beside it is left out, and the divergence-theorem sums, taken
about the world origin, close the crack by a cone to the origin, so the
error grows with the body's distance from it.
A closed surface's area vectors sum to zero. When the picked meshes'
sum could move the volume by more than 1e-5 within the body's size, and
the display plan (which shares every edge's nodes between its faces) is
closed, the body is measured on the plan, about its box centre. Every
other body measures exactly as before.
Tests: the cut ring at the origin and moved by up to 10000 mm, against a
grid quadrature of the cut; a revolved ring of cones and cylinders moved
100/1000/10000 mm along each axis (1e-6); a cylinder and a frustum far
from the origin against hand values. Robustness seed 64 moves by 1.4e-6
and is recorded.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Measure: a gap the display plan can't close is measured about the box's centre
When the meshes leave a gap and the display plan isn't closed either, the
sums used to fall back to the origin-based volume, which drifts with the
body's distance from the origin (7 % at 1000 mm for the part ring). The
per-face sums are now taken about the fine mesh's box centre, which closes
the gap by a cone to a point inside the body; over a closed mesh nothing
changes. The gap decision moves into gap_closed, and a unit test with a
cube left open by hand covers closed vs open meshes, the closed plan, and
the fallback with an open plan or none.
Seeds 14, 20, 40, 55 and 61 end with such a body and are recorded with
ROBUSTNESS_GOLDENS_BLESS (volumes move by -0.51 %, +0.16 %, +1.9e-4,
+9.0e-5 and -1.5e-5; steps, outcomes and counts unchanged).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Record robustness seed 86 after measuring bodies whose meshes leave a gap
Seed 86 was added on main by #2387 after this branch's goldens were recorded. Its last
body leaves a gap in its meshes, so the measure change here moves its volume by -0.27 %
and its area by +0.13 %; steps, outcome and counts are unchanged. Seed 86 passes
unchanged on main 57d21013. Every other seed matches on the merged branch.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* measure: take the display plan only where it agrees with the sums to within what the gap could move
A closed display plan meshed less finely than the sums differs from them by its own chord error,
which can be larger than anything the gap explains: an imported part with small blends measured
0.03 % low on its plan. The plan is now taken only where the two differ by at most what the
gap's area could move the volume within the body's size; otherwise the sums about the box's
centre stand.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* measure: sum a mesh left open about its box's centre only, without the display plan
The closed display plan meshes some faces of an imported B-spline part
more coarsely than the sums do, so a body and its boolean pieces no
longer add up: clearance's union cross-check then refused a 17.3 mm3
overlap between two such parts (the pieces implied 20.5). Summing about
the box's centre alone keeps the gap closed by a cone to a point inside
the body and stays consistent with the pieces. Seeds 64 and 86 are
re-recorded with the reason.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* measure: placement tests in the area's test files
The ring and frustum tests join measure.rs's tests, and the cut ring
joins measure_centre_tests.rs (AGENTS.md: a regression test goes into
the existing test file for its area). The goldens note for seeds 14, 20,
40, 55 and 61 describes the centre-only sums.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* measure: keep the origin for a body left open on purpose
A surface, or a cup whose lid is still a separate sheet, has no volume of
its own. Measured about its box's centre, two such bodies stopped
comparing once the centre moved (a crowned lid rises), which broke the
patch crown test. Only a mesh with a small crack is measured about the
centre now.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF
* Robustness goldens: keep main's notes, one note for this change's seeds
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A sketch attached to a face is evaluated in the face's frame. When that frame is the body's
own, the body was still rebuilt as a new ModelBody with empty mesh cells, so projecting the
face's edges display-meshed a throwaway copy and the next cut or join meshed the same body a
second time. On a body whose cut edges are slow to mesh this added about a second to each
feature after a sketch on a face. In place, the anchored body is now the model's own clone and
shares its mesh.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3223
* Extrudes from a nested STEP part's face join and cut it with the imported root active (#3223, #2872)
Opening a STEP assembly leaves its root component active, and the root
owns no body: its parts are components inside it. A profile sketched on
such a part's face was therefore treated as outside the active scope.
Join made a separate body instead of joining the part, and the automatic
operation saw no material and offered New Body in either direction; an
automatic extrude that came out as a cut found nothing to cut.
A component with no body of its own now works on the bodies of the
components inside it whose geometry lies in its own frame (as an import
places them): Join targets the body whose face the sketch is on, the
automatic operation looks at those bodies, and an extrude whose own
operation is Cut or Intersect takes part in every body as an explicit
cut already did.
* Split the schema contracts into one module per command file
`schema/commands.rs` becomes `schema/features.rs` (solid.box, solid.extrude,
FeatureResult) and `schema/inspect.rs` (engine.describe), each with its own
tests file holding its `schemas_and_the_key_check_agree` key lists and its
`strict_keeps_todays_errors` cases, so conversions of different command files
touch different files. The shared loops become helpers in `schema/tests.rs`;
the assertions are unchanged. `engine.describe` gains a key-list test, and
`schema_defaults_are_valid` now covers every command with a contract.
No behaviour change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add shared schema field types for the next conversions
For the feature commands to be converted next, each deciding acceptance with
the reader the handlers already use:
- `FaceRef` and `FaceRefs` (`face::face_ref`, `features::face_points`)
- `EdgeRef` and `EdgeRefs` (`features::edge_points`)
- `SketchRef` (`features::sketch_id`)
- `FeatureCommon`: `name`, `body_name`, `body_names` and `participants`,
which `add_feature` reads for every feature, flattened into a contract
with `deserialize_with = "feature_common"`, which keeps the key in the
message and the issue's path.
The shape checks of `face_ref`, `edge_points` and `sketch_id` (and
`feature_sketch`) move into pure helpers (`face_ref_form`, `edge_ref_form`,
`sketch_key`) that the handlers and the types share; the handlers behave as
before. Tests check that each type and its schema accept what the reader
accepts (apart from a face name's byte cap and an index written `1.0`),
that the contract's messages match the handlers' errors, and that the
handlers still look picks up one at a time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3510
* Split Body: each piece can be renamed on its own (#3510)
A split named its new pieces after the split body every time (`Top (1)`),
so renaming a piece did nothing, and renaming the split body renamed the
other piece too (and broke the features that used it). The pieces now
take the names body.rename stores, and a rename keeps the names later
features derive from the renamed body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>