Commit Graph
6 Commits
Author SHA1 Message Date
Matthew KnutsonandClaude Opus 5.5 991082fbaf Typed contracts for the construction axes, points and planes (#2829) (#7750)
* claim: #2829 (construct.* contracts)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Typed contracts for the construction axes, points and planes

The 19 construct.* commands get input contracts and FeatureResult as
their output, with shared types for references, planes, a plane or
face base, an axis line and a construction plane's name, each calling
the reader its handler uses (split out of geo, plane_param, the face
capture and named_axis_line).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 06:03:04 +00:00
98abb249c4 Cylinder: place by distances from reference edges, like Hole (#6380) (#6381)
* claim: #6380

* Cylinder: place by distances from reference edges, like Hole (#6380)

A Cylinder standing on a flat face can take up to two straight edges of
that face as references, each with the distance of its base centre from
the edge's line, measured in the face's plane, as a Single hole does
(#37). `solid.cylinder` takes them as `references: [{edge, distance}]`
with a numeric `base`; the edges are found again by their persistent
names, else their points, so the cylinder follows them when the part
changes, and each distance is a parameter (an input of Inspect Feature).
A cylinder without references stays at its base, as before.

In the Cylinder window, started on a picked face, Reference 1 and 2 take
the edges, each with its Distance measured from the pick, so it works
with the mouse alone; the canvas shows each distance with a box to type
it in, and Edit Feature picks the edges again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder: Edit Feature shows each reference edge input once (#6380)

A face selected when Edit Feature opened the window had already added
the reference inputs; the edit added them a second time.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder references: the measured-once cost test's cylinder has none (#6380)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder: pick the face it stands on in its window, then the edges (#6380)

The Cylinder window took its place only from a face selected before it
opened, so started first it stood at the origin and offered no reference
edges. It now has a Face input before Reference 1 and 2, as the Hole
window does: start Cylinder, click the face, click the edges, OK.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Glossary: reference edge, and "Reference" among the words with more than one meaning (#6380)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder edge references: the Cone dialog (#6250) gets the references field too

The Cone primitive landed on main after this branch began; its dialog initialisers lacked
the `refs` field the Primitive kind gained here. The dense form check for Cylinder fills only
its fields: its face and reference edges place it, which the reference tests cover.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder: declare references in its contract; reference-placed cylinders are not placement-independent

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 19:28:22 +00:00
Matthew KnutsonandClaude Opus 5.5 ae530bff44 Typed contracts for the cylinder, sphere, torus, cone, pipe, bounding solid and scale (#2829) (#7145)
* Typed contracts for the cylinder, sphere, torus, pipe, bounding solid and scale

Contracts for solid.cylinder, solid.sphere, solid.torus, solid.pipe, solid.bounding_solid and
solid.scale, with `FeatureResult` output, and the shared types `AxisDir` (calling
`cmd::axis_dir_form`, split from `axis_dir_param`), `NumberExpr` and `ScaleFactors`. The
descriptions say what the evaluation does: the limits it enforces, the real default scope of
`targets`, and where `participants` overrides a key or has no effect. Scale makes no body, so it
declares `name` and `participants` itself. Box's descriptions get the same corrections. The
reply test runs every form in Warn and checks for no `param_warnings`; the guide lists the new
types and adds lessons from the conversion.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Typed contract for the cone

`solid.cone`, added on main beside the primitives this PR converts, gets its contract and
`FeatureResult` output: the cylinder's keys plus `top_radius` / `top_diameter`, with the
evaluation's limits in the descriptions (a radius above 0, a top radius of 0 or more, a height
that is not 0 and may be negative, sizes within 1e7 mm). A `null` top radius stays the handler's
to refuse, since the handler takes it beside a `top_diameter`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 12:42:16 +00:00
HiroKenEzandClaude Opus 5.5 a1eb63c169 Extrude: the picked region is the one extruded again (#6724) (#6766)
* claim: #6724

* Extrude: the picked region is the one extruded again (#6724)

Since #5530 (#5302) every index or point pick grew to the whole drawn
profile that reference geometry cuts, so a lens or crescent clicked in
Extrude, where the face's projected outline cuts a circle, extruded the
whole circle while the dialog highlighted and counted one region.

Dialogs now send exact_regions: true with their profile picks, and the
command keeps each pick to the region it names. Picks without the flag
(scripts, agents, the CLI) still take the whole drawn profile (#5302).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 21:02:43 +00:00
raykholo 59795872f6 Extrude: document which way a positive taper goes (#4098) (#4115)
* claim: #4098

* Extrude: document which way a positive taper goes (#4098)

A positive taper slopes the walls outward (the far end is larger along the
extrusion direction), a negative one inward. Say so in the params doc, the
JSON schema and the guide, and pin the sign with a test.
2026-10-24 21:27:34 +00:00
Matthew KnutsonandClaude Opus 5.5 453c6bcb14 Split schema contracts per command file and add shared field types (#2829) (#3558)
* Split the schema contracts into one module per command file

`schema/commands.rs` becomes `schema/features.rs` (solid.box, solid.extrude,
FeatureResult) and `schema/inspect.rs` (engine.describe), each with its own
tests file holding its `schemas_and_the_key_check_agree` key lists and its
`strict_keeps_todays_errors` cases, so conversions of different command files
touch different files. The shared loops become helpers in `schema/tests.rs`;
the assertions are unchanged. `engine.describe` gains a key-list test, and
`schema_defaults_are_valid` now covers every command with a contract.

No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Add shared schema field types for the next conversions

For the feature commands to be converted next, each deciding acceptance with
the reader the handlers already use:

- `FaceRef` and `FaceRefs` (`face::face_ref`, `features::face_points`)
- `EdgeRef` and `EdgeRefs` (`features::edge_points`)
- `SketchRef` (`features::sketch_id`)
- `FeatureCommon`: `name`, `body_name`, `body_names` and `participants`,
  which `add_feature` reads for every feature, flattened into a contract
  with `deserialize_with = "feature_common"`, which keeps the key in the
  message and the issue's path.

The shape checks of `face_ref`, `edge_points` and `sketch_id` (and
`feature_sketch`) move into pure helpers (`face_ref_form`, `edge_ref_form`,
`sketch_key`) that the handlers and the types share; the handlers behave as
before. Tests check that each type and its schema accept what the reader
accepts (apart from a face name's byte cap and an index written `1.0`),
that the contract's messages match the handlers' errors, and that the
handlers still look picks up one at a time.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:54:13 +00:00