Commit Graph
32 Commits
Author SHA1 Message Date
austin62jakeandClaude Opus 5.5 a735620aa8 Circular pattern: the axis origin takes length expressions and follows them (#10852) (#10855)
* claim: #10852

* Circular pattern: the axis origin takes length expressions and follows them (#10852)

solid.pattern.circular with axis {origin, dir} kept its origin as plain
numbers, so a pattern about a parameter-driven point stayed where the
point was when the pattern was made: the seed moved with the parameter
and the copies did not. Expressions were refused (#248).

The pattern's origin is now a point of expressions, as a Mirror plane's
origin is: numbers or length expressions, evaluated on each rebuild, and
renamed with their parameters. Plain numbers are saved as numbers, as
before. timeline.edit sets pattern.origin as expressions, and editing the
pattern in its dialog keeps them. One pending format change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:17:15 +00:00
SilentWolf75andCursor 355b486595 Parameters: unit-less numbers follow the other side's unit (#9015) (#9027)
* claim: #9015

Co-authored-by: Cursor <cursoragent@cursor.com>

* Evaluate bare length offsets in the design's units (#9015)

Feature expressions like baseLength - 1 were subtracting millimetres because val() parsed with mm defaults and only applied design units to a final unit-less result.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-29 21:52:23 +00:00
6ebfe91661 History: say why an edited feature behind the marker changes nothing (#8100) (#8727)
* claim: #8100

* History: say why an edited feature behind the marker changes nothing (#8100)

Editing a feature that sits after the history marker (double-clicking its
greyed-out item) rolls back to it, previews the change, and on OK puts the
marker back where it was: the feature stays rolled back, so nothing in the
view changes and nothing says why. That is the silent "pattern of a cut
does nothing" in #8100 (the reporter's design has its pattern behind the
marker; on main the pattern itself builds fine once rolled forward).

- timeline.redefine replies `rolled_back` and, when true, a `note`; it also
  carries the feature's `warning` (for a rolled-back feature, the one its
  constructor met building it at its place).
- The window shows that note in the status line after such an edit.
- A rolled-back item's tooltip in both History layouts says it is after
  the history marker and not built.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pending locale: Arabic, Hebrew, Japanese, Vietnamese and Chinese for the rolled-back notes

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 17:11:10 +00:00
raykholo 0e01dc9bad Pattern counts: say when a parameter has a length unit, and refuse fractional counts (#5066) (#5337)
* claim: #5066

* Pattern counts: name a length-unit parameter, refuse fractional counts (#5066)

A count parameter created with a length or angle unit now gets an error
that names it and says to set its Unit to none. A count that evaluates to
a fraction is refused instead of being rounded silently.
2026-10-29 01:00:10 +00:00
dudedagger42andClaude Opus 5.5 4afd93331f Patterns: a body of a moved component is copied where it is shown (#4763) (#4969)
* Patterns: a body of a moved component is copied where it is shown (#4763)

A pattern of bodies made outside the bodies' component (a screw's body patterned from the root)
moved each body's stored geometry, which is in its component's frame, by transforms in the
pattern's frame. The copies landed where the body sits before its component is placed: near the
origin, for every pattern kind. As Mirror does, each copy is now moved as the pattern moves the
body in the world and kept beside its source, in its component.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pattern test: unground the placed component before moving it

Upstream now grounds a design's first part when it is made.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 08:27:38 +00:00
Dahak BuildsandDahak Builds bd44f6f496 Reference features by id everywhere: Pattern/Mirror seeds and construction planes (#1134) (#6858)
* claim: #1134

* doc: key pattern/mirror seeds and construction planes by feature id (#1134)

* engine: resolve seed names the way evaluation did; keep timeline.edit name input (#1134)

* fmt/clippy cleanups (#1134)

* ui: resolve construction-plane names by feature id in plane_description (#1134)

* fmt: sketch_attachment_ui after rebase adaptation

* engine: timeline.add resolves legacy name-keyed seeds and plane names (#1134)

* chore: re-trigger CI (GPU runner timeout flake)

* doc: replayed_sources walks id-keyed pattern seeds (rebase adaptation)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 22:56:06 +00:00
semmelrindeandClaude Opus 5.5 4d06daf87b Patterns: one before the feature it copies follows that feature's parameters (#6726) (#6727)
* Patterns: one before the feature it copies follows that feature's parameters (#6726)

A pattern or mirror of features made with the timeline rolled back comes
before its sources and replays them from their definitions. Its
fingerprint chained only the features before it and its own inputs, so a
change of a source's parameter left its result in place: the box grew,
its copy kept the old length, also after rolling forward.

The chain fingerprint of a pattern or mirror of features now also takes
the fingerprint of each feature it replays (and of their sources, for a
pattern of a pattern), wherever they are in the timeline.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Patterns: a test for a later feature taking a deleted source's name (#6726)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Patterns: fingerprint the replayed sources with the document, as fingerprint now takes it (#6726)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 12:01:58 +00:00
semmelrindeandClaude Opus 5.5 613903229e Patterns: copies of a To Object extrude follow the face it reaches (#2121) (#6093)
A feature's face points are moved onto their named faces before it is
evaluated, so a To Object extrude follows its target face when an earlier
feature moves it. A pattern's or mirror's copies were built from the
feature as stored, with the face where it was picked: after a gear's disc
was made thicker, the tooth reached the new top but its pattern copies
kept the old height. The copies now use the same moved points; the move
is one helper used in both places.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:28 +00:00
e2b8bf5a05 fix: copy a pattern's features in timeline order, not in the order they were picked (#4873)
A circular or rectangular pattern of a hole and the chamfers on its edges failed with
"no edge near ..." when a chamfer was picked before the hole: the chamfer was copied
first, onto a body that had no hole there yet.

Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-24 21:52:49 +00:00
Martin PålssonandClaude Opus 5.5 4dc30c092d Mirror and pattern: a pattern or mirror feature as the source (#395) (#3998)
* claim: #395

* Mirror and pattern: a pattern or mirror feature as the source (#395)

A pattern or mirror of features refused another pattern or mirror as a
source ("Pat cannot be patterned or mirrored yet"). Such a source now
stands for what it copied: its own sources are replayed at each of its
transforms moved by each of ours, to any depth up to eight. Copies of
a feature picked directly keep the instance numbers they had, so
existing designs keep their face names; copies made through a nested
pattern or mirror are numbered after them, so one feature reached two
ways never names two copies alike. A pattern or mirror of bodies as
the source is still refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 07:55:14 +00:00
raykholo 426f8ddd18 Rectangular and circular pattern: copies that miss the body are reported (#3042) (#3919)
* claim: #3042

* Warn when cut pattern copies remove no material

A rectangular or circular pattern whose copies miss the body succeeded silently and those copies did nothing. The pattern now reports how many of its cut copies removed no material, and keeps the copies that land.
2026-10-23 14:22:45 +00:00
Martin PålssonandClaude Opus 5.5 96ce31153c Pattern and mirror: a rib as the source (#4593) (#4667)
* claim: #4593

* Pattern and mirror: a rib as the source (#4593)

A pattern or mirror of features refused a rib as a source ("Rib1
cannot be patterned or mirrored yet"). A rib's walls run until they
meet the body, so each copy is built again where it is: the rib's
sketch is moved by the copy's transform and the walls are run against
the bodies there, as a hole is drilled again at each copy. The copies
join the body, as the rib does. The rib's own tool building moves into
rib_tools, which the rib feature calls unmoved.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 13:44:52 +00:00
raykholo 26ca82735b Circular Pattern and Revolve: a construction axis can be the axis (#2885, #4506) (#3796)
* claim: #2885

* Circular Pattern and Revolve: a construction axis can be the axis (#2885)

The dialogs send a picked axis by its name, but solid.pattern.circular
only knew X, Y and Z, and solid.revolve / surface.revolve read any other
name as a sketch line id. Picking a construction axis therefore failed.

- solid.pattern.circular takes a construction axis name, saves it as
  `axis_feature` and turns about the axis as evaluated, so the copies
  follow it when it is edited.
- AxisRef::Construction { name } for revolve and surface revolve,
  resolved at evaluation and checked to lie in the sketch plane.
- construct.plane.at_angle accepts a construction axis name (its fixed
  axis line is taken from the axis as it is now).
- Reopening these features shows the construction axis as the pick.
- Design format: pending/construction-axis-refs.rs.

* Construction axis references follow the axis in the feature's component frame (#4506)

- Revolve, Surface Revolve and Circular Pattern resolve a construction axis
  where it is evaluated, mapped into the feature's component frame.
- A line of the revolved sketch with the same id as a construction axis
  still wins, so existing scripts keep their meaning.
- Tests: the revolve keeps the reference through save and reopen and
  follows an edited axis (60π to 80π mm³); perpendicular, offset and
  profile-crossing axes are refused without changing the design.
2026-10-22 18:21:11 +00:00
denelson1-dotandClaude Opus 5.5 30e0db1e05 Pattern of a join that merged its targets keeps working (#3378) (#3387)
* claim: #3378

* Pattern and mirror copies of a join that merged its targets join the merged body (#3378)

Since #2755 a pattern or mirror copy of a primitive reuses the seed's targets. When the
seed was a join that merged two targets, the second one no longer exists, so the copies
failed with `unknown body`. The copies now keep the seed targets that are still there;
when none is, the names stay and the error says which body is missing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Rerun CI: the previous run was cancelled before any check ran

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:15:39 +00:00
rlartot aef13b52f4 Pattern and Mirror copies of a primitive change only the seed's targets (#2755) (#2756)
Thanks @rlartot.
2026-10-19 07:44:40 -04:00
Karl Von Richter 9422853cf9 Feature mirrors and patterns: preserve replay and add Flip/Center placement (#1619)
Thanks @Karl-VonRichter.
2026-10-16 03:01:00 -04:00
Erikas 17b48d9e7e Booleans: planar cuts beside rounds take the exact route before the retries (#1197) (#1445)
Planar cuts beside rounds take the exact route before the boolean retries (#1197).
2026-10-15 13:31:41 -04:00
Karl Von RichterandKarl-VonRichter 1ec33fcdc7 Extrude: a symmetric distance is the total thickness (#1260)
A symmetric solid extrude of 10 mm is now 10 mm thick, 5 mm each side of the sketch plane, and switching from One Side to Symmetric keeps the thickness entered. Under format 21 the extent records its convention; designs saved without it keep the per-side reading, so their geometry and parameters don't change. Fixes #1236.

Co-authored-by: Karl-VonRichter <Karl-VonRichter@users.noreply.github.com>
2026-10-15 01:19:55 -04:00
Erikas 5744b1f327 Test: a pattern of touching cuts builds without fallback (#400) (#1144)
Test: a pattern of touching cuts builds without fallback (#400).
2026-10-14 17:56:17 -04:00
semmelrinde c166c64b8e test: measure a scaling pair again when the load of other test binaries spikes (#649)
The two scaling tests measure a pair again (up to three times, keeping each size's fastest run) when other test binaries slow one down.
2026-10-13 09:38:28 -04:00
onenewcode 00baf1d883 fix: follow feature renames in references (#486)
Fixes #401
2026-10-12 22:39:13 -04:00
bherbruckandClaude Opus 5.5 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
Jonas Wrede 829912c6c5 perf: cut many clear tools of any cut in one boolean (#368) (#387)
One extrude cutting many circles from one sketch still cut the plate once per
circle, each boolean rebuilding and re-meshing a plate grown by every hole before
it (32 circles 2 s, 128 circles 60 s). The #261 fix joined clear tools with
kernel::union_apart only in pattern replay; apply_traced now does it for every
cut with 8 or more tools (patterns included), keeping each piece's face lineage.
2026-10-12 16:09:46 -04:00
Jonas Wrede f82b6beedb test: failing regression test for #368 (ignored until fixed) (#377) 2026-10-12 15:25:27 -04:00
c7f0139ad4 test: failing regression test for #261: Rectangular pattern of a hole cut scales super-linearly (#276)
* test: reproduce #261 (Rectangular pattern of a hole cut scales super-linearly)

* Patterns of many hole cuts scale near-linearly (#261)

Two quadratic costs:
- Meshing a face tested every point against every segment of every boundary
  loop, so a plate face with hundreds of holes meshed in quadratic time. The
  vendored truck-meshalgo inside test now skips loops whose parameter box is
  clear of the point (they wind zero times around it).
- A pattern cut each copy in turn, rebuilding and re-checking an ever more
  complex target per copy. Copies whose boxes are clear of each other are now
  one tool of many pieces (kernel::union_apart, no intersection work), cut once.

512 holes now take ~7 s instead of not finishing. The test's volume tolerance is
widened from 1e-6 relative to 0.1 % of each hole: the measure meshes the bores
and reads each hole ~0.06 % small, on main too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Hole-pattern test: a budget CI can meet; coarser apart-box meshes (#261)

CI runs every test binary at once and is about ten times slower than a
machine running this test alone (15 tests passed 60 s in the last run), so the
512-hole pattern (about 6 s alone) hit the 60 s timeout there. The budget now
only has to tell linear from the quadratic hang: 300 s timeout, 120 s budget.
union_apart meshes each copy coarsely (2 % of its size, box grown by twice that).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Hole-pattern test checks the scaling, not a wall-clock time (#261)

CI runs every test binary at once: the 512-hole pattern (about 6 s alone, 10 s
CPU single-threaded) took 177 s there, so no fixed time is reliable. The test
now patterns 128 and then 512 holes and requires the second to take under 8x
the first (linear is 4x, measured 3.5-4.2x here; the old quadratic cost was 16x
or more), each with the volume check and a 900 s hang guard.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 11:18:28 -04:00
lillith 56b499e951 Reject invalid explicit axis origins instead of using zero 2026-10-12 09:51:58 -04:00
bherbruckandClaude Opus 5.5 9219eb5dc1 Rebase fixes: one helix re-export, a closing brace lost in tests.rs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-09 12:47:56 +00:00
bherbruckandClaude Opus 5.5 9ee8ba5dd7 Imported looks outlive later features: a body's imported colour, opacity and face colours (kernel paint, dropped by operations) are carried to the next version of the body, its faces by persistent name (split faces keep the colour, new faces take the body's); assigned face appearances already follow their faces by name
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-09 12:47:56 +00:00
bherbruckandClaude Opus 5.5 d10312b7fd Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-09 12:17:23 +00:00
bherbruckandClaude Opus 5.5 b36b332619 Patterns and mirrors of holes drill each copy afresh (its spot moved by the instance transform and found on the surface there), so a blind hole's depth counts from the face at the copy instead of from the bottom of the original hole (QA s30: three blind holes now remove three holes)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruckandClaude Opus 5.5 10e66785b1 Patterns of components (rectangular, circular or path: new occurrences at each placement); path pattern orientation test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 00:51:24 +00:00
bherbruckandClaude Opus 5.5 075808e7ee Pattern on Path (PatternOnPath: spacing or first-to-last distance, flip, identical or path orientation; instance k moves by path(k·d) − path(0)), rectangular/circular/path patterns of bodies; recipes: path_pattern (oracle 53 passes)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 00:42:26 +00:00