Commit Graph
1341 Commits
Author SHA1 Message Date
SS-EN 98c30d28f9 Joints: a replaced motion link keeps the driven joint where it is; links count in dof (#2898)
Thanks @SS-EN.
2026-10-19 17:29:40 -04:00
shop-3d 44cbd7ae73 I18n danish (#2671)
I18n danish.
2026-10-19 17:23:00 -04:00
NOWN-DEV 53a9260aeb Interference: near-coaxial pins after a STEP round trip, with flush heads, in either order (#1984)
Interference: near-coaxial pins after a STEP round trip, with flush heads, in either order.
2026-10-19 17:22:56 -04:00
kezmdor e5291dc8f7 Fonts: egui's built-in Hack as the last fallback for symbols (#2956)
Fonts: egui's built-in Hack as the last fallback for symbols.
2026-10-19 17:22:50 -04:00
plexi32 a1badaed17 Convert Mesh uses the selected mesh body (#2482)
Convert Mesh uses the selected mesh body.
2026-10-19 17:22:44 -04:00
3d105fb281 parameters: import evaluates once; parameters.change takes several names (#2777)
* parameters: import evaluates once; parameters.change takes several names

parameters.import checked every row through change_param, which cloned the
design and evaluated every parameter per row: 2000 rows took 9.5 s, 2823 in
an assembly minutes. Rows are now checked and applied in one pass with the
values carried along, then evaluated once (2000 rows: 0.016 s), still all or
nothing; a row may name a parameter defined by a later row.

parameters.change {changes: {name: expression, ...}} sets several existing
parameters together, rebuilt once and undone in one step.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* parameters.change: the params doc names the `changed` result of `changes`

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 17:22:37 -04:00
amolinari-autotex 0b787f8eae Show and edit standard part configurations (#2680) (#2681)
Thanks @amolinari-autotex.
2026-10-19 17:07:01 -04:00
SS-EN a6b44ab0d3 Profiles and cap attachments fall back to the best match when a sketch outline changes (#2897)
Thanks @SS-EN.
2026-10-19 17:00:55 -04:00
Logan Night b0c4b6e939 Chamfer: a manipulator for Distance 2 with Two Distances (#2711) (#2856)
Thanks @flyboy-byte.
2026-10-19 16:47:08 -04:00
fkirill 983fbe2b14 Fix lip and groove on round objects (#2751) (#2790)
Thanks @fkirill.
2026-10-19 16:34:50 -04:00
02c77df5f7 inspect.clearance: mesh each body once per check instead of once per pair (#2867)
* inspect.clearance: pairs whose bodies did not change are not measured again

Each clearance check measured every close pair again, though between two
checks usually only a few bodies change or move. Results are now kept per pair,
keyed by both bodies' geometry and placement and the check's settings; a pair
whose two bodies are unchanged is taken from that cache. With 40 overlapping
parts, a check after moving one of them took 0.8 s instead of 23 s (741 of 780
pairs reused). Pairs that could not be worked out are tried again each time.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: boxes and placed keys exactly as before the reuse

The pair boxes are taken over the mesh's triangles with finite corners, as a
distance shape's are, so pruning is unchanged. A placed body's identity now
includes its model body's own frame, so two placements are never mistaken for
one another.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: a large body is meshed once for all its pairs

Each pair that touches cuts the larger body down to the pair's region with a
kernel boolean, and that boolean meshed the whole body twice: once for its
checks and once inside the intersection. A sheet with 600 faces paid about
2.5 s per pair for meshes that were the same every time.

A body can now keep its meshes for reuse (Body::keeping_meshes); its booleans
take the meshes from there, and the intersection takes its shell meshes
from there too (truck-shapeops: and_with_history_meshed). Clearance uses such
copies for one check. Results are unchanged to the bit. On a 3 x 2 m sheet
with bends and 300 holes, the clip took 0.23 s per pair instead of 2.6 s, and
24 rivets took 5.6 s instead of 16.5 s.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:14:24 -04:00
takuto-NAandbherbruck 77c3b1e765 Sketch: preview slot outlines before committing (#2535) (#2537)
* claim: #2535

* claim: #2535

* Sketch: preview all slot sides and caps while choosing width

Fix missing temporary slot geometry for all five tools and paint every preview curve with a shared sampling budget. Preserve the arc slot construction guide. Add geometry, painting, invalid-input and interactive typed-width regression coverage.

* Sketch: honor typed slot widths below the pointer minimum

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:13:51 -04:00
28d67fb577 Regression tests: a cut short of a face keeps its skin, and the issue's pleats mirror and build at the far end (#1669) (#1730)
* Extrude: a profile edge short of a face is not grown through the skin beyond it (#1669)

A cut or join profile edge that lies on a face of the target is grown off it by 0.5 % of the body, so that the tool's wall does not lie in the face. Whether it lies on a face was judged half a growth step either side of it: empty just outside, material just inside. An edge 0.25 mm short of a 3.75 mm wall's far face reads the same, and the growth cut through the skin it should leave (55 050 mm³ instead of 56 130 on the test's wall). Now the space just past the edge, 1e-4 of the body out, must already be as the operation wants too.

In #1669, the pleat's window built directly at the far end of a case opened through the wall at 3.75 and 4 mm, while its mirror, built without the growth, rightly left the skin and then failed to join the loft through it. Built either way, the window now leaves the skin.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Regression tests: the issue's pleats mirror and build at the far end (#1669)

The issue's battery case at 3.5 mm: the mirror of the window and the pleat builds (it needed #1670's meshing of twisted faces), and at 3 mm the same window and pleat built directly at the far end of the finished case join it (they needed #1667's end rounds).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Far-end pleat test: the direct build matches the mirror's volume

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Erikas <erkexzcx@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:13:26 -04:00
1999e763ab Tapered extrude: arcs meeting at corners meet where their moved circles cross (#2810) (#2813)
A loop made only of arcs took the all-arcs shortcut in `offset_loop`, which
moves each arc by its radius and keeps its start and sweep angles: exact for
arcs on one circle or meeting tangentially, but where arcs of different
circles meet at a corner (a circle with lobes) the moved arcs no longer
met, and the sides were built through the wrong points without an error.

`arc_corners` moves each such corner to where the two moved circles cross,
nearest the old corner (`circles_cross`, closed form), and cuts both arcs
there. Circles that no longer cross are refused ("not supported yet"), an
arc the taper turns around closes the profile. Between the sections the
corner is a straight ruling, as for every side in `taper_loop`: on the test
profile (2.5 mm at 45°) it stays within 0.015 mm of the exact corner.

Test `tapered_extrude_of_arcs_meeting_at_corners`: the volume against the
integral of the union of the shrunk circles, 18905.42 mm³ against 18907.67
(was 18975.45).

Co-authored-by: Mariusz Pacek <pacekm90@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:12:52 -04:00
rlartotandClaude Sonnet 5.5 750e08aab7 Sketch palette: a new empty sketch is not "Fully constrained" (#2906) (#3011)
* claim: #2906

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* Sketch palette: an empty sketch says "No geometry yet", not "Fully constrained" (#2906)

A new sketch has no degree of freedom (only the fixed origin), so the
palette read it as fully constrained. With no drawn curve or 3D curve it
now shows "No geometry yet" and not the fully-constrained styling.
Adds the message to the English, Japanese and Chinese catalogs.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* i18n fr: Aucune géométrie pour l'instant (#2906), à valider avant push

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-19 16:12:10 -04:00
rlartot 31b41978fc Construction geometry on model vertices follows them when a parameter moves them (#568) (#2409)
Thanks @rlartot.
2026-10-19 16:11:38 -04:00
rlartotandClaude Sonnet 5.5 f42c068063 Hole: size the tool by the body it drills, not the largest body (#2904) (#2975)
* claim: #2904

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* Hole: size the tool by the bodies its axis meets (#2904)

hole_tools_and_prisms sized the tool (reach above the face, depth of a
through hole) by the largest body of the whole model, so a large body far
away changed a countersink's outline and the volume it removed. Use the
largest body the axis meets, falling back to the model as before.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-19 16:11:35 -04:00
26f42ae09b Snapshot: draw a see-through appearance see-through, and show a tool body inside its target (#2329) (#2330)
* Snapshot: draw a see-through appearance see-through, and give the CLI --body, --tool and --section

A headless picture dropped a body's opacity: the scene carried only a colour, so a design with
a translucent appearance was drawn opaque by `solidcraft-cli snapshot`, by MCP screenshots and
in a design's thumbnail, although the window has always drawn it as glass. There was then no
way to look at the body a cut would remove inside the material it meets: only a volume to
measure and reason about, which hides exactly the errors a picture makes obvious (a tool that
stops short, or lands in the wrong place).

- `SceneMesh` carries the body's opacity; `view::build_scene` takes it from the design
  (`model_body_opacity`), and a selected body stays solid so the selection colour reads.
- The GPU capture routes a see-through body into the scene's glass at its own alpha, as the
  viewport does; the CPU rasterizer draws the solid bodies first (they own the depth buffer),
  then the see-through ones blended over them, far sides before near sides and without writing
  depth, so what lies inside shows and a line between the two is not hidden.
- `snapshot --body NAME:opacity=0.3,color=#rrggbb`, `--tool NAME` (that body solid in the tool
  colour, the rest see-through) and `--section z=27` run the commands the app itself runs
  (`appearance.assign`, `inspect.section`): the options are shortcuts, not a second renderer.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Tests: measure the tool colour as it is drawn through a see-through target

The tool-colour filter was derived on paper and demanded a red more than twice either other
channel, which the target in front of it tints away (measured: (200, 108, 85) through opacity
0.3); and the colour check painted the tool, which a solid target hides.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* fmt

* Snapshot options: strip the colour's # rather than slicing it; README

Slicing `value[1..]` on an input-derived string is what the house rules ask us not to write,
even where a length check has already made it safe. The error a failed assignment reports now
names the body rather than claiming it came from --body, since --tool reaches it too.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* --tool: assign the bodies around the tool in groups, not one command at a time

Each appearance.assign is an undo step with a document snapshot behind it, so one per body
made --tool cost grow with the size of the design for no reason: the bodies around the tool
all get the same opacity, and the ones that share a colour can be named in one call. A design
whose bodies all wear the default grey now costs two commands whatever its size.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Rasterizer: say where its glass and the GPU's differ

Splitting each see-through body by facing orders its own two layers; it does not sort across
bodies, which the GPU does. Worth stating rather than leaving a reader to find it.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:10:45 -04:00
f68a3dd5d5 Joints: an as-built joint at an origin on one of its parts follows it (#2600)
`joint.as_built` with `at` an origin on A or B keeps that origin on its
side (found again by its face's name on each solve) and holds the frame
where it is now on the other, so the joint follows the face or hole as
the design changes. Without `at`, or with an origin on another part,
both sides hold their frames as before.

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:10:10 -04:00
vandang890615 72601e678a i18n: add Vietnamese (vi) localization support (#2915)
* i18n: add Vietnamese (vi) localization support

Add Vietnamese (vi) message catalog with 1,583 translated keys covering CAD modeling commands, UI dialogs, timeline, analysis tools, and AI agent chat.

Register VIETNAMESE catalog in ui-egui/src/i18n.rs and add unit test verifying translations, labels, and dynamic browser naming.

* chore: attribute Vietnamese locale and sort catalog

* i18n: fix corrupted and half-English strings in Vietnamese catalog

* i18n: polish residual command and UI translations in Vietnamese catalog
2026-10-19 16:09:36 -04:00
fkirill 42e991069f Fix shelling revolved barrels (#2421) (#2486)
* claim: #2421

* claim: #2421

* Fix shelling circular-meridian barrels (#2421)
2026-10-19 16:09:11 -04:00
c1f9224579 Fillet fit: an outside round concentric with a wall's inside round is no longer refused (#2852)
* Fillet fit: a round counts only what lies between its edge and its arc

The fit check refused a round when any other face of the body reached into
the wedge between its edge and its two setback lines. A round changes only
the part of that wedge between the edge and its arc: a face on the ball's
side of the arc is left as it is. An outside round concentric with the
inside round of a 3 mm wall (R18 over R15) was refused as too large
(largest 14.21 mm) although it keeps the wall 3 mm thick.

The face check now tests a round's fan of prisms from its edge to its arc
(Frame::pieces, already used for blends that cross), after the wedge as a
quick filter. Chamfers keep the wedge, which is what they change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH

* Fillet fit: a curved face clears a round's thin end pieces only by a chord (#324)

The fan test shrank each piece by the curved faces' tolerance; the thin pieces at the
arc's ends vanished, so a hole wall 0.3 mm into a round beside it was missed and the
round failed to build instead of offering the radius that fits (issue_324_tests).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:08:37 -04:00
NOWN-DEV b0b59480eb Joints: relations that tie part of a placement (#2497)
Joints can tie part of a placement: parallel, angle, point on plane and more (#2496).
2026-10-19 16:08:23 -04:00
Colin Faulkingham e1268c6ad9 Fix fillets around tiny rounded-rectangle end edges (#2506)
Fillets around tiny rounded-rectangle end edges now build (#2498).
2026-10-19 16:08:06 -04:00
NOWN-DEV 473f1e6516 Sheet metal: readable face names from the sheet itself (#2275)
Sheet metal faces get readable names (#2272).
2026-10-19 16:08:01 -04:00
NOWN-DEV 539c17b425 Joint sweep: drive a joint until parts touch, and report where (#1981)
Joint sweeps can stop where parts touch and report the contact and remaining room.
2026-10-19 16:07:44 -04:00
The Nomad d3fa22e987 3D mouse calibration in Preferences (#2326)
Adds a 3D mouse calibration section to Preferences (#1463).
2026-10-19 16:07:38 -04:00
DuBearteandClaude Opus 5.5 45ae7c00e0 Convert Mesh asks for the mesh body and its tolerance (#3001) (#3012)
* claim: #3001

* fix(ui): Convert Mesh asks for the mesh body and its tolerance (#3001)

It had no dialog, so the toolbar ran mesh.convert with no body and it always
reported "select a mesh body". A dialog now takes the mesh body (a selected one
fills it) and the tolerance.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 16:06:16 -04:00
DuBearteandClaude Opus 5.5 24d64799d8 Update window: release-note links open in the browser (#2943) (#3004)
* claim: #2943

* fix(update): release-note links open in the browser (#2943)

The notes kept a link's text and dropped its target, so the blue text could not
be clicked. Links keep their web address, and each paragraph or item is
followed by its links as buttons that open them, as the agent chat shows links.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 16:06:06 -04:00
DuBearteandClaude Opus 5.5 a9c7616e7f Lines thinner than a pixel no longer vanish without multisampling (grid lines, #2823) (#2871)
* claim: #2823

* fix(view): lines thinner than a pixel no longer vanish without multisampling (#2823)

A line quad narrower than a pixel covers no pixel centre when it falls between
two rows, so the grid's 0.7 px lines came and went as the view zoomed where the
viewport draws without 4x MSAA (some browsers and devices). Such lines are now
drawn a pixel wide, faded by the width they lack.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 16:05:56 -04:00
CamWightandClaude Opus 5.5 d306d6e658 Two-sided extrudes: through all (or To Object) on either side, a distance on the other (#2700) (#2728)
* claim: #2700

* Two-sided extrudes: the second distance goes the other way from the first side, either way round (#2700)

extent_sides ignored `direction` when an extrude had `distance2`, so through all with
`direction: negative` and a second distance went the positive way. The second distance now goes
opposite the first side wherever that went (direction: negative, a negative distance, a To
Object below the sketch). A pending format step makes older designs' reversed two-sided
extrudes positive, which keeps their shape.

The Extrude dialog's Two Sides shows Distance 2 for every extent type (it was hidden for All and
To Object but still sent as 10 mm) and offers Reverse; the second arrow points the other way
from the first.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* The two-sided arrows test checks each tip against the sketch, not just their order

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 16:05:45 -04:00
b20e693c2e Sketch text: a letter crossed by an edge is picked whole with its text (#2619)
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:05:28 -04:00
b3f205a638 Agent chat: the design bridge gets its own MCP name, so a user's solidcraft entry can't shadow it (#2592) (#2596)
* claim: #2592

* fix(agent-chat): the design bridge is named solidcraft-app (#2592)

A user's own MCP entry named `solidcraft` (as docs/mcp.md suggests) took the
bridge's place in agents that keep their own entry on a name clash, so the chat
worked on a headless session instead of the open design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:05:17 -04:00
cronos bd4eb42c2d Pin analytic robustness and edge-contact scale regressions (#1950)
* test: pin analytic robustness and edge-contact scale regressions

* test: freeze patterned-bore reference after body grouping change
2026-10-19 16:05:00 -04:00
99d8d382b9 Bill of materials: part properties on components and assembly.bom (#1888) (#1899)
* Bill of materials: part properties on components and assembly.bom

A component definition now carries part properties (part number,
description, revision, other tools' keys) and free text properties,
saved with the component and shared by its occurrences.
component.metadata and component.metadata.set read and change them in
one undo step; Paste New copies them; parts.insert numbers standard
parts from their standard and size, and parts.resize renumbers them.

assembly.bom counts the placed components (flat: parts at any depth
through their subassemblies; top: direct children), grouped by part
number or by definition, sorted by part number, and writes CSV (fixed,
quoted columns) or JSON. The app gets a Bill of Materials window on the
INSPECT panel that lists, edits and exports the rows.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: name a merged row's equal definitions once

Two standard parts with the same size are separate definitions with the
same name; their row now reads "SHCS M6x20" instead of repeating it.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Window widths test: close the Bill of Materials window between commands

The test closes the floating windows a command opens before starting
the next one; the Bill of Materials window was left open and measured
against the next dialogs' limits.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: sub-parts in their part's row, and part properties without re-evaluating

assembly.bom takes group_children: true. A part with a part number keeps
what is placed inside it (a bolt's washer and nut) in its own row, listed
under it as children (items 1.1, 1.2, with each and count) instead of rows
of their own; bolts with different contents stay different rows, and
total_occurrences is the same either way. The window has a switch for it
and shows the children under their part; the CSV lists them after their row.

Changing part properties re-evaluated the model, re-seated every joint and
rebuilt the placed model: 361 ms per change with 30 jointed bolts. A change
that only touches components' metadata and properties now takes the same
path as a render-only change (proved on the whole Document), also for its
undo and redo: 0.6 ms.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: look the structure up once, not per subassembly

Deciding whether a subassembly is a part (it has bodies of its own) scanned
every body of the model for each subassembly, and each body looked up its
feature by a linear search of the timeline: subassemblies × bodies × features.
assembly.bom now indexes the placements, the body owners
(Document::body_owners: one pass over the bodies with the timeline in a map,
the same rule as model_body_component) and the numbered components once per
call. 600 bodies and features with 60 subassemblies: 8.1 ms → 1.3 ms; the
old cost grows with the cube of the design's size.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:39 -04:00
William Dunn d8d04c9009 Tool modifiers: shared resolve, classic defaults, preview-safe Ctrl (#1616)
* Centralise tool modifiers with classic defaults and preview-safe Ctrl.

Route sketch/selection chords through a shared resolver. Keep Alt snap
suppress and dual toggle as defaults; optional Shift add-only and Ctrl
snap mapping. Skip preview rollback while a manipulator drag is active.

* Address #1616 review: classic snap suppress, single viewport owner, docs.

Default suppress to Ctrl/Cmd or Alt; drop navigation set_suppressed; remove unused label_key; add preview rollback gate test; document sketch modifiers.

* fix(#1616): correct Modifiers primary in tests; simplify rollback fixture.

* Treat Ctrl as primary off macOS, and rustfmt the modifier files.
2026-10-19 16:04:28 -04:00
1cd9983c8f Surface trim: projected curves, several kept regions, mutual trim (#767) (#1466)
* kernel: trim keeps picked regions, mutual trim, curves swept along a direction (#767)

Trim moves to surface_trim.rs: TrimKeep::Side (the old behaviour) or
Regions (the connected pieces the points pick, parted where the tool runs
along an edge). mutual_trim cuts two one-face surfaces by each other's
surface, extending one that stops short when asked. SplitTool::Curves takes
a sweep direction; a closed curve's field is signed by inside/outside
instead of extending its end segments.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: classify display edges of a face with a closed-edge hole without a panic

A hole cut by a closed curve is a loop of one edge that starts and ends at
one vertex; mapping the face rebuilt that edge through a check that
panics on it (the guard caught it and dropped every smooth flag of the
body). Such faces are now left out of the ruled-surface test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.trim: keep several regions, trim by projected sketch curves, mutual trim (#767)

keep takes a list of points (the regions they pick); curves: {sketch,
curves?, direction?} sweeps sketch curves onto the surface (along the
surface's normal: not supported yet); with + keep_with trims two
surfaces by each other, extend? meets a short one, stitch? sews the
kept pieces. Trimmed faces carry their lineage, so they are named
after the faces they are pieces of. New fields noted in a pending format file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Trim dialog: sketch curves as the tool, several keep points, mutual trim (#767)

The tool input takes sketch curves too; keep points are places (several
on one face add up); another surface with its keep points makes a mutual
trim with Extend to meet and Stitch toggles. Edit Feature brings it all
back. Labels in every locale catalog.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ROADMAP: M8 trim by projected curves, several regions and mutual trim (#767)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:02 -04:00
bherbruckandClaude Opus 5.5 b00d45cc7b Open: draw the Home picture after the design opens (#3053) (#3140)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 15:44:06 -04:00
bherbruckandClaude Opus 5.5 f3505f0db6 World placement on all cores (#3053) (#3123)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 15:43:22 -04:00
e4d9015f68 sketch: points placed by expressions (#2864)
* Sketch points placed by expressions over the design's parameters

A point typed as an expression ("W", "H / 2") in sketch.point, sketch.line and
the other point arguments is fixed where its expressions come to, and moves
there again before each solve when the parameters change: an outline that
follows its parameters needs no dimensions and no solve per change. The
expressions are saved with the point (one pending design-format change), listed
with the sketch's other expressions, and renamed with their parameters; one
that cannot be worked out is refused.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Sketch point expressions: accurate params doc, out-of-range regression test

The sketch.line params said every point argument takes expressions; only those that
also take a point id do (the rectangle corners, an arc's through point and the like
are plain [x, y]). PointExprs' comment called its expressions mm. A test covers a
parameter that puts a placed point out of range and a design file whose point
expression overflows: both are errors, not crashes, and the sketch recovers.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 13:05:28 -04:00
fkirill 3b4db52c10 Respect display units in sketch fillet fields (#2420) (#2487)
Thanks @fkirill.
2026-10-19 10:38:48 -04:00
SS-EN fb82ccb273 Timeline/MCP API: suppress lists, dotted edit keys, set_parameter expression (#2899)
Timeline and MCP edits take suppress lists, dotted edit keys and parameter expressions.
2026-10-19 10:14:23 -04:00
SS-EN 3115c50359 Chamfer: two distances and distance + angle on curved edges (#2893)
Two-distance and distance + angle chamfers work on curved edges.
2026-10-19 10:14:18 -04:00
fkirill 5bed5196c7 Fix lens-profile cuts into revolved quarter spheres (#2791)
Lens-profile cuts into revolved quarter spheres now build (#2750).
2026-10-19 10:14:12 -04:00
fkirill b4e049f9a6 Preserve equal-radius fillet mitre tangency (#2485)
Equal-radius mitres keep their endpoint tangent so a later fillet can select the chain (#2422).
2026-10-19 10:14:07 -04:00
takuto-NA b76302e850 Assembly: reuse reference meshes during rigid joint motion (#2922) (#2924)
Thanks @takuto-NA.
2026-10-19 09:15:26 -04:00
SS-EN 771f62be71 Interference: clear apart pairs from their meshes, intersect the rest in parallel, time budget (#2895)
Thanks @SS-EN.
2026-10-19 09:14:52 -04:00
fugazister aee47fca00 Messages window: keep status messages to read and copy again (#2763) (#2764)
Status messages are kept for the session in a Messages window (Help menu, or click the status chip), newest first, with Copy all.
2026-10-19 09:09:35 -04:00
The Nomad 4c30d944f5 3D mouse: only the window with focus moves (#2077) (#2212)
With two windows open, the 3D mouse now moves only the one with focus.
2026-10-19 08:48:06 -04:00
SS-EN 7fd51ce6a5 timeline.roll_to: accept "end", refuse other non-number positions (#2902)
A position that is not a number or "end" is now refused instead of moving the marker to the end.
2026-10-19 08:18:01 -04:00