Commit Graph
20 Commits
Author SHA1 Message Date
ivisafandClaude Opus 5.5 3bcf77ee32 Expressions: a number and its unit are one value (10 mm / 2 mm is 5) (#6331)
* Expressions: a number and its unit are one value (10 mm / 2 mm is 5)

A unit written after a number was multiplied in at the precedence of `*` and
`/`, so `10 mm / 2 mm` was (10 mm / 2) mm = 5 mm² and `90 deg / 1 rad` a value
in angle², reported as a unit error. The number now takes the unit after it
before `*` and `/` apply; a fraction of numbers before a unit stays one value
(`1/2 in` is half an inch), and an exponent stays a plain number (`2^3 mm`).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Expressions: after a division, a fraction before a unit only when closed up

`width / 10 / 2 mm` read the `10 / 2 mm` as the fraction 5 mm and gave
width / (5 mm) = 8 instead of (width / 10) / 2 mm = 2. After a `/` the
fraction rule now needs the fraction written without spaces (`1 in / 1/2 in`
is still 2); elsewhere `1/2 in` and `10 / 2 mm` are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 12:24:34 +00:00
9d45fa6b34 Respect design units across length fields (#3271) (#3315)
* claim: #3271

* fix(ui): use document units across length fields (#3271)

* Format

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Adapt drag-extrude and joint tests to document-unit length helpers

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(ui): preserve blank parameter drafts and cover bounded lengths

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 10:24:30 +00:00
Ahmad Khan a49698ee3d Value fields step with the arrow keys and the mouse wheel (#2320) (#2608)
* claim: #2320

* Value fields step with the arrow keys and the mouse wheel (#2320)

Up/Down in a focused value field step a plain number by 1 in the unit it is written in
("20 mm" -> "21 mm", "2,5 mm" -> "3,5 mm"), 10 with Shift and 0.1 with Alt; the wheel over
the focused field does the same, a step a notch, instead of scrolling the panel under it.
Expressions such as `width / 2` are left as typed, and an open completion list keeps the
arrows. Every expression field gets this through `params_dialog::complete`: the value box
beside the geometry in every dialog, the dialog rows, sketch dimensions, the dimension
editor, Drive Joint and the Parameters window.

* The value box beside the geometry stays under the pointer

The box rides on the arrow's tip, so each wheel notch that stepped its value moved it, and
after a notch or two the box slid out from under the pointer and the wheel zoomed the view
instead. While the pointer is over it the box now keeps its place, and it goes back to the tip
when the pointer leaves.

* Value stepping is a preference, off by default

Preferences › General › "Step values with the arrow keys and the wheel" (`step_values`,
also through `ui.prefs`) turns on Up/Down and wheel stepping in value fields, and the value
box staying under the pointer while the wheel steps it. Off, as by default, value fields
behave as before: Up/Down move the text cursor, the wheel scrolls, and the box beside the
geometry follows its arrow.

* Value stepping test: Bend Radius is under Advanced now

* Value stepping test: the preference is on the Design page

* Value stepping test: draw the field straight into the test's frame (#2320)

The shared outer-host rule now covers tests too; the field needs no panel around it.
2026-10-25 05:34:03 +00:00
NOWN-DEVandClaude Opus 5.5 c0640cb95e inspect.parameter_sweep: check a design across a parameter's range (#2273) (#2276)
* inspect.parameter_sweep: check a design across a parameter's range

Rebuilds a copy of the design at each value of a parameter and reports what
no longer holds compared with the design as it is: features that fail or
warn, joint origins that are lost or turn over on their own part, sketch
planes that turn over, and sketch solves that fail or fold. The design is
not changed; each value's rebuild time is reported too.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.parameter_sweep: params doc matches what it takes and returns

`steps` takes at most 199 (200 values), as the check says; failed and
warned entries carry the feature's name; a lost origin says which one; a
value the parameter refuses gives {value, ms, ok: false, error}. The
refusal test covers steps 200.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.parameter_sweep: Japanese and Chinese labels

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-25 01:19:00 +00:00
leValdemar19andClaude Opus 5.5 f7b08ab8c4 Dimension values: #name = value defines a parameter too (#2371) (#4212)
* claim: #2371

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Dimension values: `#name = value` defines a parameter too (#2371)

`#width = 40` in a dimension's value now works like `width = 40` (#2916):
it adds the user parameter `width` and dimensions with it. On `main` the
`#` made it an ordinary expression that failed to parse.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 21:53:16 +00:00
DanielandClaude Fable 5.1 8b65d41b31 Expression completion: keep longer names visible when the typed word is a unit (#3663) (#3664)
* claim: #3663

* Expression completion: keep longer names listed when the typed word is a unit (#3663)

Typing `rad` into an expression box showed nothing because `rad` is the radians unit and
a word that is itself a known token closed the popup. The popup now stays open on such a
word. A complete name (`width` with `width_extra` defined) opens it unarmed: the longer
names are listed with no row selected, Enter submits what was typed and Tab moves on; Up
or Down picks a row, after which Enter or Tab complete it as before. A unit means
something only after a number, so a unit typed anywhere else (`rad` on the way to
`radius`) is a prefix like any other: the popup is armed and Enter completes `radius`
instead of submitting one radian.

A complete token is extended only by names that start with it (`in` lists `inner`, not
`rounding`), a typed unit offers no other units (`in` does not list `inch`), and a unit
right after a number (`2 in`, the form every dialog starts its sizes in) opens no popup at
all, so nothing sits over a dialog's OK button.

Fixes #3663

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-10-24 08:01:48 +00:00
b289dc2421 Sketch Dimension: name = value defines a user parameter (#2916) (#3638)
* Sketch Dimension: `name = value` defines a user parameter (#2916)

In a dimension's value (the D tool's box, and `sketch.dimension`'s `value`
from scripts, the CLI, MCP and the control channel), `name = expression`
adds the user parameter `name` with that expression and dimensions with
`name`: typing `width = 40` on a line gives a 40 mm user parameter `width`
and a dimension whose expression is `width`. A bare number is read in the
design's unit, as a bare dimension value is; an angle's parameter is in
degrees. The expression may be anything the parameter editor takes.

It is one command: one undo removes the parameter and the dimension
together, and a dimension the sketch refuses leaves no parameter behind.
A taken name is refused with a hint (type the name to use it, or change
it in Parameters), a reserved name with the parameter editor's message,
and a left side that is not a name (`2 = 3`) still fails to parse as
before. A driven dimension defines nothing. The reply carries `defined`,
and the status line names the parameter.

The splitter lives in the doc crate (`expr::definition`) so other value
inputs can take the same form later; editing an existing dimension, the
inline shape boxes and feature dialogs are follow-ups.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Sketch Dimension: say why a name is refused, in the command's own words (#2916)

The dimension editor showed a refused definition raw, in the box and the
status line: "invalid parameters for `sketch.dimension`: value: `mm` is a
unit, constant or function name". It now reads "Sketch Dimension: `mm` is
a unit name, so it cannot be a parameter name": the editor passes the
command's errors through `friendly_error` like every other command, and
drops the `value:` field tag, since the box is the value. The taken-name
hint reads the same way: "Sketch Dimension: there is already a parameter
`w`: type `w` to use it, or change it in Parameters".

A reserved name says what kind of word it is and what that means
(`param_name_problem`, shared with the Parameters dialog): a unit name, a
function name, or a constant, "so it cannot be a parameter name";
`expr::reserved_kind` tells them apart.

`friendly_error` translates the command label with the interface language
(the engine's sentence stays English), so the prefix reads "Wymiar szkicu:"
in Polish.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Sketch Dimension test: keep the third line off the ribbon (#2916)

On current `main` the ribbon floats over the top of the canvas, and the
test's third line at sketch y = 50 projected under it: the click opened
Parameters instead of picking the line. The line now goes below the
first one.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-21 22:57:22 +00:00
Nathan Daneandbherbruck a0c1a67220 Application bar and ribbon redesign (step 1 of #2016) (#2176)
* ui: spacing, radius and type tokens, per-tab accents, agent and on-accent tokens

* ui: per-tab accent behaviour and a larger application bar with a Start page button

* icons: silhouette master and flat assistant and agent link icons (open for review)

* icons: apply review notes (sparkle assistant, refined plug, silhouette halo)

* icons: wire the silhouette master to inspect.silhouette; record the accepted icons

* ui: application bar to the design: separators, Save, house, assistant icon, readable hovers

* ui: ribbon structure: Model to View tabs, contextual Sketch and Sheet Metal, migrated pins

* ui: ribbon painting to the compact design

* ui: smaller icon button highlight and assistant mark on the bubble corner

* ui: short ribbon labels that wrap at spaces

* ui: ribbon buttons fit their labels and Finish Sketch shows its full name

* ui: constraint gallery, workspace menu, section list headings and richer tooltips

* ui: lighter selected tab label, ribbon surface and dimmer bar separators match the dark design

* ui: document tabs as rounded chips with a dimmer inactive label

* ui: document tabs fit their names and show close only when active or hovered

* icons: close and plus masters for the document tabs (open for review)

* ui: centre the new-tab plus and overflow button on the bar

* ui: a quiet rule under the ribbon tabs on non-contextual tabs

* ui: the application bar mark separates its faces with the bar colour, not white

* ui: open ribbon section label uses the selected tint and a chevron

* ui: dim the tab close and plus icons until hovered

* ui: every ribbon dropdown uses the chevron, the workspace card included

* ui: the active document tab uses the design's surface colour

* ui: the bug button's right padding mirrors its icon side

* ui: square constraint cells and a rule before the grid

* ui: constraint cells back to their earlier size, keeping the rule

* ui: smaller constraint cells and icons, centred in the section

* ui: constraint cells fit the height of the large buttons' icon and label

* ui: sketch Create titles share the other labels' line

* ui: format the application bar and ribbon changes

* ui: active tab surface token and the colour and hover tests that follow the redesign

* tests: the merged parameter and narrow toolbar tests follow the compact ribbon

* i18n: the Malay Gap label has an English source and its Japanese and Chinese translations

* apply_off_thread tests: the evaluation lingers in tests, so still computing never depends on machine speed

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 17:23:49 +00:00
SS-ENandClaude Opus 5.5 76b17f2663 sketch(feat): a click on another dimension inserts its name into the value being edited (#3186)
While editing a dimension's value, a single click on another driving
dimension now inserts its parameter name (a double-click no longer needed,
and its second click does not insert it twice). A lone value such as `10`
or `10 mm` is replaced by the name; an expression in progress keeps what
was typed and gets the name at the cursor (replacing selected text), so
`10 + ` becomes `10 + d10`. The cursor ends after the name and the field
keeps the keyboard.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 15:32:07 +00:00
Karl Von Richter 11a196e6f8 sketch(feat): add dimension references and parameter tools (#1548)
Show each dimension's parameter name while creating or editing it, and let
users insert another driving dimension at the expression cursor or selection.
Use the available editor width and keep Apply aligned with the right edge.

Add a tools dropdown with Measure, named user parameter expressions, and
access to the existing parameter table for adding and editing parameters.
Preserve the unfinished dimension expression while either window is open.

Cover reference insertion, dependent updates, parameter selection, dialog
round trips, applying and cancellation with UI integration tests. Update the
parameter guide.

Signed-off-by: Karl Von Richter<karl@embeint.com>
2026-10-18 00:00:35 +02:00
Karl Von Richter 3689f0d6e5 ui(feat): open expression suggestions with Ctrl+Space (#1852)
Thanks @Karl-VonRichter.
2026-10-17 04:07:56 -04:00
Mateusz Sych f350c35414 Expressions: a mixed number such as 2 1/8" is 2.125" (#1802) (#1820)
Thanks @SychPL.
2026-10-17 04:07:19 -04:00
DuBearte 2bfec256b7 Expressions: accept a decimal comma outside parentheses (#1347) (#1382)
"2,5 mm" is 2.5 mm; inside a function's parentheses the comma still separates the arguments. Noted under design format 22: an expression typed with a decimal comma is saved as typed, so 0.12.0 asks for an update instead of failing to evaluate it.
2026-10-15 11:40:50 -04:00
semmelrinde dfa9e094cd fix: a size worked out from a bare diameter keeps its unit when the design's units change (#716) (#779)
A size typed as a bare diameter now keeps the design's length unit, so it no longer changes when the design's units change. Fixes #716.
2026-10-13 12:35:25 -04:00
semmelrindeandClaude Opus 5.5 ce5762d873 fix(ui): Box, Cylinder, Sphere, Torus and Coil dialogs show the unit of their sizes (#630) (#709)
The Box, Cylinder, Sphere, Torus and Coil dialogs now start their sizes in the design's units with the unit written out ("20 mm", "20 in"), like the other dialogs. OK makes the same sizes as before. Fixes #630.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 10:44:10 -04:00
bherbruck 6dd202d277 Fix desktop launch, app icons and keyboard parameter editing 2026-10-11 19:09:47 -04:00
bherbruck d8beaedfa4 Open Parameters directly and prepare SolidCraft 0.3.0 2026-10-11 17:49:47 -04:00
bherbruck af536a7907 Rename displayed product to SolidCraft and add header bug reporting 2026-10-11 16:16:48 -04:00
bherbruck d71bdb78ec feat: strengthen modeling, configuration, and assembly workflows
Preserve linked sketch identities through deterministic face projection and resizing. Fix origin-corner picking, persistent inline navigation, appearance editing, configuration styles, component properties, contact sweeps, sheet exports, analytic STEP offsets, and bounded rolling-ball fit accuracy.

Validated with full cargo xtask ci, native workflow screenshots, repeated enclosure replays, and analytic geometry regressions.
2026-10-11 00:37:26 -04:00
bherbruckandClaude Opus 5.5 0d7e456bc1 Documentation site and CI workflows
An mdBook under docs/book: a user guide (getting started, UI tour, sketching, features,
parameters, components and joints, sheet metal, plastic, files, shortcuts, MCP) and a developer
guide (CONTRIBUTING, architecture, command engine, kernel boundary, persistent naming, test
harnesses, and the existing docs/*.md pages). `cargo xtask book` generates the command reference
from `solvecraft-cli commands` and renders the screenshots with `solvecraft-cli snapshot`, then
runs mdbook. .github/workflows/pages.yml publishes the book at /solvecraft/ and the web app at
/solvecraft/app/ (skipped while the repository is private). .github/workflows/ci.yml runs
`cargo xtask ci` on pull requests. README and Help → Documentation link to the book.

Fixes #28
Fixes #8

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-09 13:25:38 +00:00