Every lib warning under --features smlib outside the files agents are editing
(assemble.rs, sweep_path.rs) pointed at code nothing calls any more:
- body: shell_nesting;
- boolean_record: of_pair and its Traced alias;
- planar_regularize: the generated-wall regularization (and its branches in the
certified one, which was its only other path); planar_sources:
with_shell_planar_sources;
- plane_fit: plane_through, EdgeSampler, planar_face, plane_frame (the patch is
fill's); only loop_area is left;
- polyhedron: solve3; prism: wall_along; offset: Surf::normal;
- record: regions, region; shell_groups: groups, parents and their limits;
- splitface: side_of_point, Analytic, analytic_face, face_sides, canonical;
- spline_conv.rs, all of it (surfaces builds NURBS records); an unused import in
tess/uv.rs.
The tests of deleted items go with them: prism's wall_along test, the shell
grouping test in body_lump_tests, and the generated-regularization assertion in
regularization_protection_tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
split_band_edges_are_seams tested split.rs's splitting of a face that winds around its
surface into two (deleted with the truck reader; the record keeps the face with a seam):
deleted. ImportedBody::file_faces says each body face is a file face.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Each body's record is written directly: a manifold solid B-rep (186) per material region
with its voids, open shells as 514 form 2, faces on the record's exact surfaces and edges
on its exact curves over their intervals, in the STEP form solidcraft_step::write::topology
gives them (one geometry model for both exports). The detour through STEP text and its
re-parse is gone; the maximum coordinate is the largest coordinate written.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Import: every solid is read by solidcraft_step::topology into its record and taken into
SMLib as given (step_in/parallel.rs smlib_part), the one path; the truck readers
(step_in/brep.rs, split.rs, geom.rs) are deleted. Placements are column-major 4x4 matrices
from solidcraft_step::read placements; an instance is its part's record moved there
(ops::transform_matrix), or the very part at the identity. Assemblies, names, colours,
shared displays and the public API are unchanged. step_orientation_errors lists the faces
the STEP reader turns over (their loops disagree with their same_sense).
Export: each body's record is written by solidcraft_step::write::topology as the exact
B-rep (solids per material region, open shells as a surface model, the record's pcurves);
step_out writes products, units, colours and assemblies around it with Writer. The truck
writer and every post-processing pass (split-face merging, sheet trimming, analytic
recognition, short-edge collapse, the re-read fallback) are deleted. The context's
uncertainty is the loosest record tolerance exported.
Tests: ported to the record API with their assertions. Deleted, as tests of deleted
internals: conic_tests extruded_ellipse_seam_uses_profile_angles_for_oblique_sweeps and
conic_arcs_are_exact (truck geometry reader), tests offset_surface_analytic_geometry_and_
orientation, offset_surfaces_nested_and_hostile and periodic_knot_bsplines_are_read_on_
their_domain (truck geometry reader), corpus_truck_and_schema_4_counts (truck comparison);
the orientation counter asserts (crate::body::ORIENTED, gone with orienting by mesh).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The vendored truck-geometry they pinned is gone; the same finite-difference checks, degrees
2 to 5 and a rational surface, now pin SurfaceEval::second, which every curvature the kernel
reads comes from.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The helpers read every face of the fill as a record surface over its box, the loops'
(u, v) polygons from their exact pcurves, the rim from the free edges and curvature from
SurfaceEval::second; check_face takes the fill's faces (one, or the patches about a centre)
whose free edges lie on the body's edge curves. Expectations changed by the coordinator's
decision on loops of five or more edges: the pentagon fills as five patches (each rim edge
in halves, five spokes: at least 15 edges), the hexagon through a point as six patches with
18 edges. Every other assertion is kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
finish lays out the faces left and added (each stored relative to its surface's natural
normal with its pcurves and box, now one function, stored()), the source's shells and
regions (a region whose outer shell lost every face gone) and the edges and vertices as
they are, then calls Brep::canonical; its own ordering walk is deleted. check_geometry
and the face and edge maps are kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
sweeps_along_3d_paths asserted at most 8 faces for a 41-point path: one wall
per profile segment fitted through the points, which the exact construction
no longer makes (no curve is fitted through samples). A point path is the
polyline its points make, swept line by line and mitred at each point, so the
circle's two arcs give two walls along each of the 40 lines, and two caps:
82 faces. The volume check stands (a mitred sweep of a profile centred on its
path keeps area × length).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
face_section_along cuts a face through a point by the plane that holds the
face's exact normal there and a direction (Brep::face_section): the iso curve
"along a direction" of a link, as record curves on their intervals, the
B-splines SMLib made. The projection and the section share the picking reach,
the curve tolerance, the error words and the conversion to record curves.
(Intersection links take the base's meeting_edges, SMLib's imprint.)
lib.rs (coordinator): export point_path::face_section_along.
(not built: base in progress; no error in these files)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
iso_curves gives the isoparametric curve of a body's face through a point, along
its first or second parameter, as record curves: on a B-spline surface the
surface's own row at the point's other parameter (each control point its
column evaluated there, homogeneous, so exact for rational nets), on an
analytic surface its line or circle. It is cut where it crosses the face's
loops: each crossing solved on the loop's pcurve itself (bracketed on samples,
then bisected on the pcurve), the pieces between kept where their middle lies
inside the face (even-odd over the loops), neighbouring inside pieces joined.
A revolved surface record is not supported yet.
lib.rs (coordinator): export point_path::iso_curves.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
project_onto_face projects sketch segments along a direction onto the face of a
body at a point through Brep::project_curves (smlib_project_curves), each
projected piece the B-spline SMLib made, returned as a record curve
(RationalSpline) on its interval, within a millionth of the body's size.
lib.rs (coordinator): export point_path::project_onto_face.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The base no longer links truck, so build.rs and sweep_path.rs drop what was
kept only for other modules: chain and profile wires, the profile face,
loft wires and their ruled and smooth faces, across/section_parameters, the
cubic interpolations and NetFit, the uniform wires, the six sphere patch
faces, and sweep_path's ruled_sheet and smooth_sheet with the station helpers
only they used. Their callers switch to planar_face_record,
smlib_sweeps::{chain_curves, body_from_record, sphere}, sketch_record_curve,
the SMLib sweeps with open ends, and bspline::CurveN::interpolate.
offset_backend and polyhedron pick faces through provenance::closest_on_tri,
boolean_guard being gone.
Callers left to switch (other ports): surfaces.rs, loft_rails.rs,
surface_offset.rs, surface_ruled.rs, step_in/brep.rs, trimmed_face_mesh_tests.rs.
(not built: base in progress; no error in these files)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Rulings that are constant, or keep their angle to an arc's axis, move the edge by
an affine map: the far edge is the edge's exact image and the strip exact. Any
other ruling field (a normal turning along a free-form face, a tangent carried
round a free-form curve) ends on an offset curve, which has no exact NURBS form
in general: SMLib holds one only implicitly (SmOffsetCurve) or approximates it
(NL_CrvOffset.h, N_CrvOffsetApprox), and its ruled surface (SmApiCreateRuledSurface)
takes two B-spline curves it is given. Such a strip was a B-spline fitted within
1e-3; it is now refused by name. The fitted-strip test checks the refusal.
The round-corner cases count one face per corner: SMLib's revolve makes a quarter
turn one face, where truck's cone builder made two (12 faces and joins, now 8).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The helpers that read a face's surface, its edges and its seam shape read the record
(SurfaceEval, CurveEval, matchsurf's Patch) instead of truck faces; every assertion is
kept.
(not compiled: the kernel's test target waits on the base's step_*, build, sweep_path and
surface_ruled ports)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Before sewing, each edge of one input is split exactly (Brep::split_edges) at every vertex
of another input that lies on it within the stitch tolerance away from its own ends, so a
patch whose corner meets a body's edge part way (the five-plus-sided fill's midpoints)
sews with no T-junction. The pieces carry their edge's history. The search is the nearest
of 64 samples refined by golden section, over the vertices within a chord's reach of the
edge's samples. Nothing else in stitch changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
sew::assemble and surfaces::Parts::canonical each lay out their record as its parts stand
(regions, shells, faces, edges with no uses, vertices) and end in Brep::canonical; their own
ordering walks are deleted. spline_conv::tensor_face (no callers left) is deleted in favour
of surfaces::tensor_sheet, and fill's copy of the spline surface record in favour of
surfaces::spline_surface.
(not type-checked: the kernel stops at name resolution in step_*, build, sweep_path and
surface_ruled)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The strips keep their model (exact where the rulings move the edge by an affine
map, a ruled B-spline fitted within 1e-3 otherwise; mitred or rounded corners;
an inside corner cut back). Each strip is built on its own on the record: the
chain edge as its exact NURBS (a circle or ellipse arc rational quadratic), the
far edge its image (its control points mapped) or the fit's, the surface a plane
or the ruled NURBS between them with straight pcurves along its parameter lines.
A mitre's triangles are flat polygons; a round corner's sector is SMLib's revolve
of the incoming side about the corner's axis. The faces are stitched by SMLib
(surfaces::sheet_of, which now takes the operation's operands), each strip made
in place of its edge, each corner face in place of the two edges there. Tests
read the record; the check that the strips stand on the box's own edges now
looks for edges lying along them, as the result is a body of its own.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
A surface sweep along a path with corners was refused. Each smooth run is now
swept on its own with open ends by the solid sweep's corner model: carried on
straight past each corner, imprinted with the planes halving the corners and the
pieces between them kept (a point inside each face, smlib_face_points), the
profile turned through each corner onto the next run; the runs are stitched.
Only moving along the path, the runs meet as they are. Each wall keeps the
segments its uncut face came from through SMLib's tags. Sweep options along a
path with corners are refused as the solid sweep refuses them. The sheet
builders use smlib_sweeps' curve and path_curve; their own copies are gone.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
smlib_sweeps' loft_rails kept its own copy of the rail law with the anchoring
4056 was refused by (a rail lying in the last section's plane met at its first
crossing there). It now builds the sections with loft_rails::Section and takes
the sections and stations loft_rails::railed gives, so the law and its fix live
in one place. path_curve is exported beside curve for the sheet builders.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The doc puts exact tools into SMLib's boolean as drawn, so nothing asks whether a touching tool
can be joined, batches extrusions, or probes for room to grow a profile.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
loft_blend hands its net to surfaces::tensor_sheet (the bridge's own one-face sheet);
section_frames picks the face that bounds the whole chain and faces the run best from the
record's edge uses and the face's SurfaceEval normal, and reads its frames with
bridge::frames. Behaviour and messages unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
match_surface and seam_continuity read faces as record surfaces (SurfaceEval over the
face's domain), pick the face and its kept side's edges from the record, chain and frame
the target through bridge::chain/frames, keep the crown whose bridge strays least from the
original, and turn the bridge face to the target's sense by building it again turned
(surfaces::Parts). The history is over [body, target]: the face modified from the body's,
its edges new. Behaviour, constants and messages unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
general_fill takes loops of three to sixteen edges. quilt_body assembles fill_iso's
patches into one sheet: each loop edge whole, or for five or more its two halves at the
middle of its interval, both on the edge's exact curve record and sharing a midpoint
vertex; each spoke a new edge from that vertex to the centre; every pcurve the straight
line in (u, v) of its side. The history marks every face generated, each edge or half a
piece of the body's own edge, each spoke new. A reversed loop edge's knots keep the
interval's ends exactly, so pieces name the edge's own vertices.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
sketch.intersection_curve (LinkSource::Intersection, crates/doc/src/
project.rs) intersected the two bodies' display meshes triangle by triangle
and chained the segments into polylines: a curve known only as points, off
the true intersection by the meshes' chord.
kernel::meeting_edges(a, a_face, b, b_face, chord) takes each side whole or
as one face (that face alone as a surface body, surfaces::taken), tags both
and imprints the first by the second in SMLib (smlib_imprint: "each of its
faces that `tool` meets cut along the intersection", capi/include/smlib.h).
SMLib intersects the faces' surfaces and trims each curve to both faces, so
the edges the imprint makes are exactly where they meet; its own history
says which they are (an edge no edge of either operand became). Each comes
back as its record curve on its interval, from SMLib's export of the
imprinted body, with its points from that body's mesh at `chord`. Sides that
do not meet give none.
The intersection link now stores each edge as a wire with its exact curve
(Wire::exact, the existing WireCurve; no new type or format change), its
points at 1/1000 of the larger body. project3d::mesh_intersection, its
triangle/triangle test and segment chaining go; project3d::mesh_of becomes
part_of (the body and, for a face reference, the face index).
Needs in crates/kernel/src/lib.rs (the coordinator's): `mod intersection;`
and `pub use intersection::{MeetingEdge, meeting_edges};`.
Not built: base in progress (kernel-smlib/no-truck 513ebe47 does not build).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
A rig case whose SMLib call fails left nothing to replay it from: nothing called
solidcraft_smlib::set_dump_dir. `solidcraft-cli kernel-cases --dumps=DIR` now points SMLib's
dump folder at DIR/<area>-<case> before each case runs, so a failing call leaves its
arguments and B-reps there (smlib_brep_read reads them back into a scratch C program), and
turns it off after the run. Off without the flag. The kernel exposes it as
smlib_dump_dir, beside smlib_built (the CLI reaches SMLib only through the kernel).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Edge chains are the body's record edges, walked along their curves the way the
chain runs; G1/G2 conditions read the open edge's face on the record with its
exact first and second derivatives (SurfaceEval::derivs, ::second). The face is
built on the record: each side the network surface's boundary row on its knots,
split at the chains' inner vertices into edges over parts of the side's interval
(no knot insertion), each with its straight pcurve; a collapsed side is left out.
boundary_join counts the record's edges. Tests ported.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
bridge::{chain, frames, frames_across, chain_closes} and surfaces take
body.record() instead of encoding one; a surface body is Body::from_record of the
canonical record, a stitched one Body::from_smlib_record of SMLib's export, its
history matched to the input record when SMLib's import numbers it alike.
record::attach takes the new form.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The bridge core was already its own geometry; its readings went through truck.
Chains are edges of the body's record (index, direction), measured along each
edge's record curve the way the chain runs; a support face is a record face whose
surface is evaluated with its exact first derivatives (SurfaceEval::derivs) where
truck's were finite differences; the station's parameters come from SurfaceEval's
projection. The bridge face is surfaces::tensor_sheet, and blend_between records
it as new over [a, b]. frames, frames_across and chain_closes take the body and
face index. Boundary patches go through the same bridge. Tests ported.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
surfaces.rs gains the record pieces NURBS faces are built from: a NURBS surface
and curve as record geometry, a pcurve along a parameter line, a whole tensor face
bounded by its net's boundary rows and columns (exact for a clamped surface), and
all_new for a face new to an operation. tspline_sheet makes a regular T-spline
that tensor face and an irregular one its Bézier elements, each side split at the
T-points, each edge an exact Bézier piece of its side with a straight pcurve on
every patch it bounds, shared between neighbours. Tests ported to the record.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Copy, unstitch, reverse and remove faces, Patch (a sketch region, or a planar loop
of a body's edges) and Extend work on the body's record: Parts puts any faces,
edges and vertices into canonical order, and each face taken is the body's face
(Kept), its edges the body's. Sheets are SMLib's sweeps with no caps (extrude,
revolve, curve sweep, stations for twist/scale/orientation/rails), a chain at a
time; a loft lofts each column of matched segments and stitches the columns.
History: a wall comes from the segments its edges in the start plane lie along.
Stitch joins the bodies' records and sews them with smlib_stitch, faces and edges
carried back to the bodies through SMLib's tags. Offset Surface offsets each face
on its own with smlib_offset_sheet and stitches the offsets within the tolerance:
smooth neighbours stay joined, sharp ones come apart, as before; the fitted
offset surfaces and their fold check are gone. Thicken is SMLib's thicken.
Not yet: a surface sweep along a path with corners (refused). Tests ported;
the fold-radius message test now checks only the refusal.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
loft_rails.rs placed stations between truck wires. Its law now works on the
sections' exact NURBS curves (Section, from the sketch segments' record curves)
and returns the sections and stations, each a curve list a loft is skinned
through; nothing of truck is left.
Case 4056 (a keel rail lying in the bow's sketch plane): rail() anchored every
section at the rail's first crossing of the section's plane after the section
before. A rail lying in the last section's plane crosses it all along, first at
the far section, 100 mm from the bow's curve, and the loft was refused ("a guide
rail crosses section 2's plane"). A rail runs from the first section to the
last, so the last section is met where the rail ends; the sections between are
met at their first crossing, as before.
smlib_sweeps.rs's solid loft_rails keeps its own copy of the anchoring and has
the same cause; it should call loft_rails::railed.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
freeform.rs turned each free-form sketch segment into a truck edge. It now gives
every segment (lines, arcs, Béziers, conics) as a record curve and its pcurve on
the sketch plane's own surface, on one parameter with the same knots and weights,
so the pcurve lifts onto the edge exactly.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
trim_keep told each piece's side of the tool from the tool's field at the
centres of its mesh triangles. Each piece now takes one point on its own
surface inside its trims (SMLib's CalculateAnInternalPoint, through
smlib_face_points), mapped to the record's face order through SMLib's
numbering of the split body; the tool's field there says the side. A piece
whose side can't be told is an error, never guessed.
(not built: base in progress; no errors in this file)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
planar_regularize now calls the fork's smlib_merge_faces as it is
(SmBrep::RemoveTopologicalEdgesAndVertices with the edges under the kept points
staying): every edge the lineage does not choose is kept by a point at its
middle, so SMLib joins the faces across the chosen ones only. A body with more
kept edges than one call takes stays as it is, as the other budgets leave it.
splitface, planar_sources and planar_regularize read the body's record in place
(Body::record) and a face's use from Body::face_forward; the two-lump test body
is Body::from_record of the two records side by side.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
planar_sources reads each face's oriented plane from the body's record
(actual_planes: the surface's plane, turned with the face's use) instead of
truck faces; the lineage rules are unchanged. planar_regularize picks the edges
to remove as before (two faces of one shell on one certified plane, from one
source unless generated walls, off every split line) from the record's edge
uses, and SMLib joins the faces across them (Brep::merge_faces: each edge
removed where SmEdge::IsTopological finds the faces' surfaces coincide), so the
merged face is SMLib's and the history its own tags (Merged), composed through
the body's. SmBrep::Simplify is not this operation: it refits curves and
surfaces by knot removal and sampling.
The planar_sources tests read face points, edges and planes from the record;
the two-lump body is built from the two records side by side, each face given
the source of its own operand's face on that plane. Deleted:
planar_regularize's alternate_adjacency_path_cannot_remove_protected_internal_edge,
a test of the truck face builder merged_face (only listed edges are removed now,
so no other path can remove a protected one).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
coplanar.rs (coincident faces pushed apart, faces glued back to back, bores and
insets joined, imprint unions), seam_faces.rs (round faces halved before a
retried boolean) and planar_faces.rs (flat B-spline faces made planes so the
coplanar strategies see them) existed to get round the mesh-based boolean's
coincident faces and seam loops. SMLib's boolean classifies coincident faces
itself (SmMerge::ManifoldBoolean, step 2), so these are retries and second
paths around the operation, not operations: deleted, not ported.
Their tests of what the boolean gives keep their volume, lump and validity
assertions and now run against the boolean itself (coplanar_tests.rs and
seam_faces_tests.rs need their own mod lines in lib.rs); the assertions on the
strategies used, and the tests of push_faces, grow_faces_exact, trim_exact,
planarized, coincident_planes and halved, go with them.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
A tool is now a set of schema 4 record surfaces, each over a parameter box,
unbounded where the tool is: a plane; a face's surface over its own box; a
sketch curve as one patch per segment swept along the direction (a line a plane
strip, an arc swept square to its sketch a cylinder strip, any other segment its
exact rational Bezier extruded), an open curve continued along its end tangents
past the body. SMLib cuts the faces where the patches meet them
(Brep::split_faces: its intersection curves trimmed to each face by
MergeCurvesOnSurface) and slices a body with one patch (Brep::split_body); the
history is SMLib's own tags. Nothing is traced on a mesh, sampled or fitted.
Which side of the tool a point is on is its offset along the normal of the
nearest patch, each patch's surface prepared once with its projection grid
(ToolSide), never per point. ToolSide::of and side_of_point take the body the
tool must reach past; face_side becomes face_sides (every face of a body, one
mesh); analytic_field becomes analytic_face (a face of a body, on its record);
split_any returns the face map instead of the truck imprint. split_edges_at and
fit (a Catmull-Rom fit through samples) are deleted with the truck code.
ssi::Surface::from_record turns a record surface over a box into SMLib's.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt