world_state, view::bounds, home_camera and scene return Result on develop; new
main code takes that with ? or session_world. New fixtures carry the spline's
nurbs. ForeignCopy::of returns Result. occurrence_placement_with walks the path
with its moves, since the placement index holds pending_moves only.
The hlr port is separate and still to come: this commit does not compile as it
stands in crates/geom/src/hlr.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
main beb35029a (Release 0.29.0), develop 05f5e8601. Committed as resolved and
not yet compiling; fixes follow by layer.
Where the two sides could not both stay as written:
- Section caps: develop's stencil crossing count (with hatch by part) kept;
main's WINDING/NOT_CAP marking and its fs_solid_touch removed. main's #9407
test is kept and has to hold on the count.
- crates/kernel/src/prism.rs: develop's, which has no 3D prism boolean; main's
#6904 route has nothing to change there. Its test still has to be ported.
- Continuity legend: main's details card, with develop's G3/G4 classes.
- inspect.analysis one at a time: while main's "several analyses" preference is
set, turning one on leaves the others on.
- Model cache: FORMAT 8, since neither side's reader reads the other's records.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
A design gave another body when opened from its model cache: the rounds a body was made of
lived only in memory, so a later round at their mitre was built sequentially (or refused, as
too large) after opening and blended with them when evaluated anew. The saved model now
records, per kernel body made by rounds, the body they were made on (a place in the bodies,
stored once though no state holds it) and the edges with their radii; reading it attaches
them back down each chain, and a thinned model keeps those bodies with the bodies made from
them. Model cache format 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since the body check mode became part of the evaluation context (9acbcf924),
evaluate digests the context with the mode, but Model::adopt still took the
context without it and the default mode: the first evaluation after opening a
design from its saved model saw another context and recomputed every feature
(undoing_an_edit_after_opening_reuses_the_saved_results,
rolling_the_marker_back_keeps_results_after_cache_eviction). The saved model
now records the mode it was evaluated under (thinned ones too), adopt takes
it and digests the context as evaluate does, and a session opening a design
under another mode evaluates it again rather than showing that mode's results.
Model cache format 6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Tests that asserted an older design rebuilds as the build that saved it made it
now assert what still holds: it opens, is upgraded, evaluates, round trips and
names alike every time, and a feature that lost a reference asks for it again.
- naming corpus: two builds still name every face and edge alike and find the
same faces with their stored names; a stored name that finds nothing must
leave its feature failed (it asks to reselect), never a feature that builds.
A sketch's face is found by its name as the sketch finds it.
- design corpus: the volumes, areas and bounds the saving builds recorded are
no longer compared; a corpus design may fail only by a request to reselect,
and undo leaves the features that failed on opening failed.
- fixed robustness seeds: no panic, valid bodies and volumes moving the right
way; a step the kernel refuses is not a bug.
- a format 28 design's pieces and a format 13 design's extra bodies: marked as
they open and named alike, without promising the numbers or names saved.
- action matrix baseline: the two corpus designs whose fillets, chamfer and
offset face held names saved before format 14 re-recorded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Face and edge names stored before format 14 were worked out from geometry and
open marked `?`. They were found among the names geometry gives today, as the
builds that saved them found them, pieces by the one nearest the pick. They
find nothing now: the feature holding one fails, asking for its reference to be
picked again, which stores its exact name. The legacy face and edge names a
body worked out for them are gone.
The tests that found such names as saved now assert the request to reselect:
a saved strip projection, a version 9 emboss on an annulus, a format 10 face
sketch and the corpus design named with numbered pieces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A face or edge name a feature stored finds only the face or edge it names: the
very name (or a synonym of that face), or the named piece told apart by the
faces around it. A face split into several pieces, merged into another face,
or left only as a face of the same stem is not the face that was picked, and a
name found on several bodies is told apart only by the body the reference's
point lies on. The fallbacks are gone: no piece nearest the pick, no merged
face, no edge at the picked point, no lost link that keeps its last geometry.
A feature whose stored reference finds nothing fails with DocError::Reselect:
blends, face points, sketch planes, sketch projection links, construction
references, hole reference edges, sheet bend edges and cylinder emboss.
The tests that asserted a fallback now assert the request to reselect: split
and removed fillet edges, a merged or rejoined face, a projected edge that was
split or is gone, a projection whose body went, saved strip projections after
wall coalescence, a fillet saved on a piece of a tapered side that is whole
now, a cut that starts from a piece that is no longer that piece, and a fillet
named on the lower of two stacked boxes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
solidcraft-cli run --validation MODE, kernel-cases --validation=MODE and
cargo xtask kernel-cases --validation MODE (with --ladder too), so the rig
runs under each mode.
corpus_designs_rebuild_with_the_same_names_and_references compared every
corpus design with a text record of each body's face and edge counts and its
full name list, last written from truck's output (a55196e7a); 110 designs
differed only because SMLib keeps whole faces truck split in pieces. Those
counts and names are the kernel's, not an outcome.
The test, renamed corpus_designs_keep_their_references_and_name_alike_every_build,
now asserts invariants only, with no record:
- every design loads; one that does not is a failure naming the design and
the step (oracle/83-boundary-loop-thicken: surface.thicken, SMLib status
1001), not a record line;
- every name a design stores (fillet and chamfer edges, faces a feature
picks, a sketch's face, sheet metal edges) finds a face or edge: none
`gone`, no sketch face `lost`;
- two builds give the same name -> face map: each named face's area and
centre and each named edge's length and middle (to 1e-6 of their size), and
the same face or edge found for every stored name.
The design already exempt for unstable piece order
(regressions/closed_sweep_torus_cut) is still only printed for the second.
On develop it fails on two designs: oracle/83 above, and
regressions/cut_up_to_face_leaves_skin, whose Extrude13 face
`F47:top#[...]` finds nothing (the truck-era record had it `gone` too). All
159 designs name alike in both builds. The records in tests/naming/ are no
longer read; CONTRIBUTING no longer asks to re-record them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The kernel switch broke these tests only through their counts, which record how a kernel splits
faces rather than whether the result is right. Each now checks its intent:
- a fitted circle is the exact circle (centre, radius, a full turn), not "one segment";
- the tight bend sweeps a valid solid of Pappus' volume, πr²(40 + 5π/2), not a count of faces,
edges and vertices;
- the Pi case keeps each outer side one face, stays valid after every feature and rebuilds the
same topology at 32 whether built there or edited there, without a hard-coded table of totals;
- a certified paint stays on the wall's radius and covers as many faces after an edit, a copy
and reopening as when it was painted;
- the offset sleeve and the extended strip are checked by their exact areas only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The README demo's Raspberry Pi case stands four standoffs on its floor: Extrude2's ring of
radius 3 round a 1.25 hole, patterned by RectangularPattern1. Each is its outer wall, its inner
wall, its top and the floor inside it: four faces. The recorded counts were truck's, which made
each cylindrical wall two halves (six faces a standoff): 25 after feature 6, 43 after the
pattern, and 8 more than now at every step after it. On SMLib each wall is one face closed on
its seam, and the counts are 23, 35, 35, 47, 47, 51, 51, 55, 71 from feature 6 on (the feature
names show it: F6:side:c1, F6:side:c2, F6:top and the floor piece bounded by F6:side:c2 per
standoff). The outer sides stay one face each, and (b) and (c) still agree step by step.
Fixes cli rebuild_topology::pi_case_faces_per_step_at_both_heights.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The single results form compares a whole number exactly (a count). The construction and inspect
cases gave positions and volumes as whole numbers, which the form they were written for compared
within tolerance; they are decimals now. The NPT groove fix makes ladder 06/023 pass: its golden
entry is the passing run (51 faces, 8226.4042 mm3).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
From the script's last sheet.flat_pattern result: the outline's size, its area less the
cut-outs', and the bend lines, each matched to its own one of the result's either way round.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A case's construction field names construction points, axes and planes with the point, line or
plane each must be, and results reads values out of the commands' own replies by JSON pointer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A case's expected.json may name files written to $OUT (json, csv rows, or a DXF's
entity counts and curve lengths per layer) and a command's answer by step, each
matched as a part of what was made.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9072
* MCP: --param-check checks calls to the running app (#9072)
`mcp --connect` (and `mcp` once it bridges to an app) took
`--param-check` and forwarded every call unchecked, while the app's own
session is always off. `Remote` now checks each `engine.execute` and
`engine.batch` against this server's command contracts before sending:
`strict` refuses a call, or a batch with such a step, without sending
anything, and `warn` adds `param_warnings` to the app's reply (each
step's result in a batch). A command with no contract here goes to the
app unchecked. `Auto` carries the headless session's level over when it
bridges to a late app. `batch_preflight::contracts` is the contract half
of the existing preflight, for a runner in another process.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6921
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CLI: run refuses unknown options and takes --param-check (#6921)
`solidcraft-cli run` now checks its options through `known_args`, so a
mistyped option fails instead of being ignored, and takes
`--param-check off|warn|strict` with the MCP server's words and default
`off`. `warn` prints each unknown key with a suggestion on stderr and
runs the step; `strict` stops at that step and writes nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CLI: run's option check takes --param-check; warn on timed runs as steps complete
`run` keeps #6919's (#6918) unknown-option check, with `--param-check`
among the options that take a value. `Session::run_script_timed` now
takes the same per-step callback as `run_script_each`, so `run --timings`
or `--profile` at the warn level reports a step's warnings even when a
later step fails, instead of after the script (and not at all on a
failure).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Problem: a design saved before body names were pinned (#6403) is pinned by its first command
that changes it, as part of that command. Undoing that command went back to the unpinned design,
whose fingerprints no evaluated result matched any more, so the first undo after opening
evaluated the whole timeline again: 63-72 s in the SELENE rover (5,484 features) when opened
from the command line or headless (`Session::opened_at`), 0.08 s with this change. `doc.open`
pinned at the end of the command instead, which kept undo fast but left the design with unsaved
changes on opening.
Solution: `Session::opened_at` pins the names as it opens the design, with the names the file's
bodies have (no result changes, so nothing is evaluated), and takes the pinned design as the
saved one: opening is no change.
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
allow_errors_writes_anyway_and_a_saved_design_keeps_failing compared the box's volume
with 4000.0 to the bit, which the old kernel's closed-form planar volume gave. SMLib
integrates mass properties numerically (relative accuracy 1e-4 asked for) and gives
the 20 x 20 x 10 box within a unit or two in the last place (3999.999999999999), the
correct answer to the precision the measure has. The test now checks 4000 mm³ to a
relative 1e-9.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new `continuity` area: seams whose order is certain by construction, each graded
`exact` (reads its order and not the next) at picked edges with Continuity Analysis's
default stations and tolerances: a box's crease (g0), a chamfer in place of a round (g0),
an r5 round on planes (g1), and a profile closed by a g1, g2, g3 or g4 blend curve between
lines, extruded (g1 … g4). `continuity.edges` may now be a list of points, picked as
`inspect.continuity` picks them, and `continuity.exact` asks for the order and no more.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
expected.json may give `continuity: {order: g0…g4, edges?: "blend" | "corner"}`: the
seams of each round, chamfer face or corner patch with the faces either side of the edge it
replaced, and of each corner patch with its rounds, are measured as Continuity Analysis
measures them (seam_diagnostics at its default 33 stations and default tolerances), and the
case fails naming the worst seam, its faces, the order it reaches and the next order's worst
value. The seams come from the faces' persistent names (doc::naming::blend_seams). The older
`{near, within_mm, …}` form is kept.
Every fillet-area case with a body gets its order: constant rounds and rolling corners g1,
curvature rounds g2, chamfers g0, the corner: g2 patch g2 at its seams.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151)
A point cloud is kept in the design as a reference, drawn as depth-tested
dots and never a body.
- io: a PLY reader (ASCII, binary little/big endian; x, y, z of any numeric
type, optional colours, other elements skipped; counts checked against the
file) and XYZ/PTS text, thinned evenly past max_points. PLY meshes with
faces can also come in through file.insert_mesh.
- doc: Document.point_clouds (shared f32 points relative to an f64 origin,
colours, units, rigid placement, size and colour), stored as a binary
container part; format change in pending/point-clouds.rs.
- engine: pointcloud.insert / edit / delete / list; doc.open opens a cloud as
a new design; selection.delete takes point_clouds; view bounds include them.
- gpu: an instanced point-sprite pipeline (16 bytes a point).
- ui: Browser Point Clouds folder with eyes, menu and an Edit Point Cloud
card; drop, Open, Insert and file dialogs take .ply/.xyz/.pts; a CPU
viewport fallback; messages in en, en-GB, ja, zh, de and ko.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: colour by the file, one colour or height, from the UI (#5151)
The Edit Point Cloud card gets Color By (File Colors, Single Color,
Height). Height is a blue-to-red ramp over design Z, between the cloud's
own two heights or, by default, a range worked out from the points (all
but the lowest and highest 2 %, from an even sample). pointcloud.insert
and pointcloud.edit take color_by and height_range; pointcloud.list
reports them. The colour of each point is worked out in one place
(PointCloud::shade) for the GPU and CPU viewports.
Also: the card's dropdowns compare the picked index (a dropdown's
response doesn't report the pick, so File Units did not change either).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: integrate format registration and viewport caches (#5151)
* Point clouds: satisfy current UI audits and document comparisons (#5151)
Route model RGB data through the theme conversion boundary, provide a compact ribbon label, and include point clouds in the new document comparison. Gate the Unix-only CLI-link helper and test so Windows all-target checks remain buildable after the rebase.
* Point clouds: isolate translations for current main (#5151)
Move the existing 74 messages unchanged into one pending locale file and attribute it through a pending row, following the current repository workflow. Repository checks, 50 tooling tests, final workspace Clippy, wasm and generated-catalog equality checks passed after the rebase.
* Point clouds: fit the rebased code to main's GpuTarget and Frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Compare point clouds when reusing placement-independent results
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: complete command help and required translations (#5151)
* Point clouds: size the save cap from the raised limit after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
A corner setback must reach past where the corner's rounds' contact lines
meet without one (smlib_blend_setback); short of it SMLib failed with its
own status (1001). The kernel now refuses it before SMLib runs, for the
rolling-ball corner (fillet_setback) and the curvature corner
(fillet_g2_corners) alike, naming the least: on each face at a corner of
planar faces and straight edges the two rails, r tan(psi/2) from their
edges, cross (d2 + d1 cos alpha) / sin alpha along an edge (r on faces
square to each other). Other corners stay SMLib's to refuse.
The rig's `refused` cases now name the reason (`refusal`, a part of the
message, required), so a failure for another reason no longer passes; a
`solid_or_refused` case may name one. Fillets: the setback cases and
783, 3435 pass; 1390, 896, 4782 past-a-full-round and the no-tangent-chain
case are refused for an unclear reason and fail.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4086
* Raise the largest file SolidCraft opens with a setting or launch flag (#4086)
* Translate the file size limit strings
* Size limits: design files are .sc now, .solidcraft still read
* claim: #7181
* MCP save: a folder the agent opened or saved a design in stays in scope (#7181)
The agent's default folders held the open design's folder only while that
design stayed open there, so after a new design, an opened STEP file or a
save-as elsewhere a save beside the earlier design was refused, while the
same save through the control port worked.
The MCP server now keeps, for the rest of its run, the folder of every
design file a call opened or saved (open, save, and doc.open, file.save,
file.save_as through execute or batch, path given in full) and, headless,
of every design open in its session. Such a call only succeeded because the
folder was already in scope, so naming a path adds nothing. The folders get
the open design folder's terms (inside home or temp, not hidden, hidden
entries unreachable), at most 16. Bridged, they go to the app as
design_folders, which it judges the same way.
The save tool description and docs/mcp.md say how to add a folder with
--allow-path.
* MCP scope: a design's folder is the folder its file resolves to (#7181)
A link in another folder to a design inside the agent's folders passes the
scope check, which follows it, but its own folder was what got remembered
(and, for the open design, what counted while it was open). Take the folder
of the file as the check resolves it.
* Control test: a hidden file the export format accepts (#7181)
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
Each seam now also reports the jump of the curvature's arc-length derivative across it (G3)
and of its second derivative (G4), both from the faces' exact partials, and its order: the
highest one every station meets within the tolerances (two new tolerances, defaults in the
kernel). The verdict keeps its meaning (smooth is G2 or better). inspect.continuity replies
with the new metrics, each seam's order and a count per order; the viewport widens G3 and G4
seams, the legend and the marker labels name every order in words. The Patch, Blend and
Boundary rows offer the orders the kernel's Construction table says they build. G4's words
in en, ar, de, he, ja, ko and zh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
As the app's Display Quality setting, set before the design opens so every display plan is
made at it; a level that isn't one is refused with the levels. For close-up reviews of
imported faces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: new designs save as .sc
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* New designs save as .sc; .solidcraft files still open and keep their name on Save
DESIGN_EXT is now "sc"; DESIGN_EXTS lists sc, solidcraft and solvecraft and
every open path (dialogs, drag-drop, recent files, CLI, MCP, links, the web
picker) accepts all three. Save of an opened .solidcraft file writes that
file; Save As, autosave, recovery and crash reports use .sc. Windows, macOS
and Linux register .sc alongside the older extensions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Update UI tests for the .sc default extension
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7009
* Assistant: connect the last-used agent and open the panel at start (#7009)
Two Settings > AI options, off by default: when SolidCraft starts, connect
the agent started last (once the installed agents are known; a missing one
is not swapped for another) and open the Assistant panel. Not for runs
started with --control.
A connection that never gets ready (no agent, start error, the agent ends
while starting) is a new Failed state: the header reads Connection failed
and Connect reads Retry. The control channel reports it as "failed" and
takes connect_at_start / open_at_start.
* Assistant: keep the start-up agent when a design replaces the blank one (#7009)
Opening a design over the blank design SolidCraft starts with reset its
chat and stopped the agent connected at start. A chat not asked anything
yet now starts over in place and keeps its agent. Turning AI features
off also drops a start-up connection still waiting for discovery.
* i18n: Arabic, Hebrew and Vietnamese for the start-up options (#7009)
ar, he and vi are complete catalogs on main now, so every new English
message needs them.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
expected.json `continuity`: over the tangent seams wholly within `within_mm`
of `near`, the curvature jump across them (exact surfaces, 65 stations a
seam) at most `curvature_jump_per_mm` clear (`clear_mm` along the seam) of the
vertices where two of them turn, where a neighbour's own G1 seam ends.
07/015, the box corner's three r5 rounds with corner: g2: one valid body of 10
faces within the box, its patch's twelve seams jumping at most 1e-3 per mm
clear of the hole's six corners by 1.2 mm (2.7e-4 measured; the ball corner
of 009 jumps 0.2). Its golden entry is the passing run's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Session::execute is a command span; Model::evaluate and each feature computed
(by its type) are spans; io's import, export and design read/write too; the
STEP reader's topology, pcurves and solid record.
- diagnostics.profile (contract + output schema): report, start/stop, reset,
Chrome trace file.
- A STEP/IGES import's reply carries its own profile while recording.
- Every app compiles the profiler in by default (feature `profile`);
SOLIDCRAFT_PROFILE=1 starts it.
- solidcraft-cli run/eval/bench-open --profile print the table on stderr,
--profile-out writes the trace; run --profile works on designs and STEP files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The branch rebased onto main keeps each of its commits; where both sides
changed the same code, these are the pieces neither side's commit had.
- Cargo: one [features] table in the CLI's manifest (two met in the merge).
- geom: a NURBS surface's `closed` set once in a placed copy (both sides
added it).
- kernel: the whole-face extrude tools (#2040) work around truck's boolean
on truck types, which left the workspace with the SMLib kernel; the
module, its tests and the doc crate's tool and tests go. The display
planner's flat fill (tess/fallback.rs) has no caller with the schema 4
mesher, and the tessellator's seam and uv modules are the branch's. A
body's boundary tolerance from a STEP file belongs to the truck body the
schema 4 record replaced: `with_boundary_tol` goes. `unmeshed_faces`
counts the coarse mesh as the branch does. A loft's section re-split
passes the lead's perimeter shares to main's `resample` (a circle breaks
there when the matched corners do not go round in order). Main's tests of
the mesh-based measure (the SMLib kernel measures exactly) and of the
IGES preprocessor name (no such field on the branch's import record) go.
- doc: a feature result carries no boolean diagnostics on the branch, so
the model cache neither writes nor reads them, and a pattern copy's miss
test runs the intersect as it is. A placed body's worker result is a
Result: a body taken from the previous placement is Ok. A thread's
clipboard remap takes main's arguments, the tapped catalogue names a
metric size by ThreadForm::Metric, and main's tests unwrap the placing
calls that return their error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
prism.rs's sheet regions import Surface and Vec3 only where they are built (the smlib feature),
so the kernel without it has no unused imports; the cli's tests that measure meshes at their own
tolerance depend on solidcraft-kernel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
doc: world_state, world_state_reusing, state_in_frame_at, state_in_frame, face_point_state,
face_point_names and construction_state return Result. A body that could not be placed, a
frame that could not be inverted, a sketch plane or thread axis that did not survive the
placement, or a failed placing worker used to leave things where they were without a word;
now the call fails with what could not be placed. is_placement is the one test of an
occurrence's placement (finite, a rotation that does not mirror, a translation within
1e9 mm). Opening a design names every occurrence that fails it; add_occurrence refuses
one; a joint solution that would place an occurrence outside one is not applied and the
joints placing it report it.
engine: Session::world_state returns Result and keeps a failure in its cache as it keeps a
placed model. bounds, home_camera, open_sketch_plane, the scene builders, the world
previews, frames::to_local and auto_operation pass the error on; helpers answering "not
found" take the placed model from their caller. Commands setting a placement check it
(valid_position, exploded view, fastener at a point, STEP insert matrix).
ui: panels, picks and hovers read the session's placed model through
open_meshing::session_world; a model that cannot be placed shows no placed bodies, and the
viewport says why across its bottom. Pictures and the control channel report the error.
cli, mcp: snapshots, renders, benches and the oracle report the error; the kernel-case rig
records it as the case's failure. Tests read the new Results with unwrap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The kernel has no boolean retries now, nor their diagnostics
(capture_boolean_diagnostics, BooleanDiagnostics, BooleanStrategy), nor the near-coaxial
crescent (coaxial_overlap, coaxial_candidate, with_attempt_budget). What read them goes:
- doc: FeatureResult and the evaluation cache carry no boolean diagnostics, and no "Boolean
retry" warning; the saved model no longer writes them (an older file's are ignored);
- engine: timeline.inspect / feature inspection drop `boolean_diagnostics`; fuzz runs and
the CLI fuzz summary drop their retry counts;
- inspect.interference: each pair is the bodies' Intersect, measured; the near-coaxial
crescent, the by-piece intersection of bodies in several pieces and the unverified notes
go (the command's doc no longer lists near_coaxial);
- inspect.clearance: an overlap is the bodies' Intersect, measured near its region; the pin
tries, the cut-down copies of large bodies (clipped, narrowed), the union cross-check
(union_disagrees, contradicted) and the malformed-part check (plausible) go, and the
measure near the origin passes its move's error on.
Tests: the retry test and the unit tests of the deleted checks are removed; the barrel join
test (tests/boolean_diagnostics.rs, now tests/barrel_join.rs) keeps its geometry checks;
the pin-in-bushing test expects the filleted case measured; assertions on empty diagnostics
and on near_coaxial are dropped; the corpus fixtures lose the diagnostics key and the one
retry warning.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
doc's FeatureResult has no boolean_diagnostics any more (truck's Boolean
retry reports, gone with truck; SMLib's boolean has no retries). The
timeline.inspect and doc.inspect replies drop the key.
Tests of the removed reports: tests/boolean_diagnostics.rs is deleted (it
checked truck's retry events and their survival through the cache, undo and
reopen); the assertions that a feature's report had no events go from
features_more_tests, patterns_tests, hole_face_tests and tests/rim_cut (the
rest of each test stays). The CLI corpus's expected replies
(move-bodies, issue-489-stacked-join, issue-616-lid-ribs) drop the key; the
issue-616 one listed a planar_fallback event. docs/robustness.md: its
section on retries becomes one on SMLib's booleans, which have none.
Left to the blends work: engine fuzz.rs (its retry-event counts) and
clearance/interference (capture_boolean_diagnostics, coaxial_overlap,
with_attempt_budget).
Not built: base in progress (kernel-smlib/no-truck 66ab6b7f does not build).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
SMLib is the only kernel now. cargo xtask kernel-cases ran every case once
per kernel asked for (--kernel default|smlib|both), setting
SOLIDCRAFT_KERNEL per run, and wrote a column per kernel; solidcraft-cli no
longer reads that variable.
The rig and the ladder run each case once, through solidcraft-cli built with
--features smlib (cargo run passes it), and report one result per case:
--kernel and the env var are gone. Each run has an output folder (--out,
default target/kernel-cases, target/kernel-ladder for the ladder) holding
results.json (every case's full result, which --results used to write on
request) and dumps/<area>-<case>/: every case runs with
solidcraft-cli kernel-cases --dumps=<out>/dumps, so a failed SMLib call
leaves its inputs for replay.
The ladder's golden holds one entry per case: golden.json is the last
recording's smlib entries, which predate SMLib running every case (its
reason says so); record it again after the first SMLib-only run.
docs/kernel-cases.md (until the next run regenerates it),
tests/kernel-cases/README.md, docs/kernel-smlib-sweeps-shell.md (its truck
column and comparisons dropped), xtask's and solidcraft-cli's usage text:
one kernel. Nothing was run.
clippy -p xtask --all-targets: clean.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
A rig case whose SMLib call fails left nothing to replay it from: nothing called
solidcraft_smlib::set_dump_dir. `solidcraft-cli kernel-cases --dumps=DIR` now points SMLib's
dump folder at DIR/<area>-<case> before each case runs, so a failing call leaves its
arguments and B-reps there (smlib_brep_read reads them back into a scratch C program), and
turns it off after the run. Off without the flag. The kernel exposes it as
smlib_dump_dir, beside smlib_built (the CLI reaches SMLib only through the kernel).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
truck-modeling, -topology, -shapeops, -stepio and the vendored truck-geometry, -meshalgo,
-shapeops, -stepio and matext4cgmath (with their attribution rows and vendor notes) are removed.
The kernel-cases runner has one kernel, SMLib, and no build-mismatch check; a modelled thread is
cut by SMLib's exact screw-swept groove (the faceted groove path is gone).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt