The native codec gave one body back with other topology: a pattern copy
cut by an automatic extrude, 10 faces, 18 edges and 10 vertices, came
back with 12 vertices, so the design opened with another body than it
was saved with. Encoded::of now decodes each body it encodes and keeps
the model only when every body comes back with the same face, edge,
vertex and shell counts; otherwise the design is saved without its
model, as when the encoder refuses a body, and opening it evaluates it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: a saved model keeps each sheet body once
A sheet-metal design wrote its sheet bodies again with every later feature's state in the saved
model: each feature that leaves the sheet alone (a box beside it) adds more than the whole sheet
to the records. A design of many features after its sheet metal passed the cache's 32 MiB
manifest limit that way and kept only some of its states (#3220). The test also opens the saved
file and wants the sheets taken from it as evaluated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Model cache: each sheet body is written once, not with every state
Problem: a saved model writes every feature's state, and each state wrote its sheet bodies in
full; most features leave the sheets as they were, so a sheet-metal design of many features
repeated them over and over (a 280-feature part: 30.5 MB of manifest, 29.6 MB of it 69 distinct
sheet records written 243 times). Past the manifest's 32 MiB limit the save thinned the cache
(#3220) and opening evaluated the left-out features again, although the distinct data was small.
Solution: the records keep a list of sheet bodies, each written once; a state names its sheets by
their place in it, as it already does for bodies and sketches. A thinned model keeps the whole
list and counts it once against its budget; the reader counts sheets with the bodies and sketches
a state holds; the cache format is now /4 (an older cache is a miss).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3220
* Model cache: keep fewer states of a design too big for its file instead of none (#3220)
A model cache over the container's budget keeps the final state, then the
slowest features' states while the bodies they add fit (a body several
states hold counts once), and is left out only when not even the final
state fits. Opening evaluates just the features whose state the file left
out, each from the state before it, so the model is whole afterwards.
* Model cache: keep each encoded body apart, copy only what a cache stores
Encoding a model too big for its file no longer copies every distinct body
into one buffer before thinning: the payload is copied from the encodings
once its size fits, so saving holds no more than before.
* Model cache tests: canonical runs in the timeline fixture; rustfmt
* Model cache: count the records a thinned cache keeps; always try the final state
Thinning counted only the bodies, so a model of many copies of one part
(records, not bodies, filling the room) shrank its budget to nothing and
saved no cache although its final state fitted. The choice now counts the
records of what it keeps, always keeps the final state, and says what it
counted, so each retry keeps less and the final state alone is always tried.
* docs: a thinned model cache counts its records and always tries the final state
* Model cache test: the slowest feature's state holds bodies 16 to 23
* Model cache: thinned opens with fingerprints that read the state before a feature
Since #3397 a feature's fingerprint reads where the bodies before it lie.
After a state the file left out, adopt takes the saved fingerprint and the
evaluation that works the state out checks it. A result evaluated ahead
is never taken as one the file left out. The thinned round trips include
the placed components' design, whose cut reads those placements.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* claim: #3221
* Save designs with large STEP imports: compress the STEP part (#3221)
A STEP between 256 and 512 MiB imported fine but could not be saved: a
design stored the STEP text uncompressed, and a design part is capped at
256 MiB. STEP sources are now always Deflated (level 2), may be as large
as an import accepts inside the file, and an import that could not be
saved even compressed is refused with a clear message. Reading stops at a
part's declared size, so a decompression bomb is refused early.
* WIP: adopt the saved model on open (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* WIP: tests
* WIP: bench-open opens as Open does
* docs: opening from the saved model
* Tests: an edit after opening evaluates from the feature it changes
* clippy
* Read SOLIDCRAFT_NO_MODEL_CACHE through the env helper
* Open: no picture from the model when the model itself opens; cancel test evaluates
* Saved model: bodies passed through found without writing their record; states list runs of bodies
* Adopted results go into the evaluation cache: an undone edit, or the marker rolled forward, takes them again
* Model cache size guard: the saved model's writer
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Model cache written by default: exact bodies, stored once, scaled caps (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* bench-open: say why bodies were not kept
* Exact planes and revolutions; budgets for large bodies (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Native B-rep: rebuild shells as the kernel made them (closed and seam edges) (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: the model cache and the exact native B-rep (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* bench-open: time a save without the cache too
* Model cache entries are Deflate-compressed (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Model cache: one that does not fit the design file is left out, never a failed save (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Agent tool calls (MCP, and bridged control requests carrying allow_paths) reach files only in the open design's folder (strictly inside home or the temporary folder, not in a hidden folder, and never its hidden files), the app's recovery folder, the server's private scratch folder and each --allow-path; --allow-any-path lifts the limit. Paths are resolved first, so .. and symlinks that lead out (including a save through a link, #845) are refused. On Windows, UNC, device, NT, verbatim non-drive, drive-relative, alternate-stream, reserved-device and 8.3 short-name paths are refused before any file system call, and the resolved path must be on a local drive. doc.recovery_discard and doc.recover {discard} delete only real recovery entries. Docs: mcp.md, control-protocol.md, README.
A save with cache: true also stores a small bounded PNG thumbnail (240 × 150, at most 256 KiB, keyed to the exact document) made from cached meshes only. Home uses it when its local picture is missing, without rebuilding the design; ordinary saves and downloads still omit it. Closes#303.
Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
Refs #303. file.save / file.save_as can store a warm native geometry cache (cache: true, off by default) keyed to the document hash, app version and adapter revision. Opening shows a bounded preview from it until the rebuilt session replaces it. Any cache failure counts as a miss.