* Insert Part: name the part families in the user's language
The Type list of Insert Part and the Change Part Size dialog showed the
library's English family names (Socket head cap screw, Hex nut, ...) in
every language. Each family now has a message under its library id,
and a family the catalogs don't know keeps the library's name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Part: the Name field's automatic hint in the user's language
The hint was the English word "automatic"; it now takes the catalogs'
parts.automatic_name, which every language already translates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the family-name helper and its test away from where #8005 adds its own
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: translate the texts a few dialogs draw themselves
The joints' Play/Stop buttons, the Motion Study's Loop and the BOM's
sub-parts checkboxes, the Stitch tolerance hint, the Flange type and the
Emboss wrap note were drawn as English literals; the joint lists named
each joint's type by its Rust name (PinSlot, PointOnPlane). They now take
messages, and the joint lists use the Type box's label, translated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new test away from where another open PR adds one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Surface, Sheet Metal, Plastic, Frame, Move, Align, Assembly, Cam,
Coupling, Sweep, Part Size and sketch editing dialogs refuse their
inputs with English sentences ("select bodies first", "pick faces of
one body"). The dialog translates a refusal through the catalogs as it
shows it, but no catalog carried these 96, so they showed English in
every language. They are added in one pending file with the eleven
usual translations.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the status in the view and the browser's editing mark in the user's language
While a sketch is edited, the view's corner said "Sketch1 — 2 degrees of
freedom" (or "fully constrained", "constraints conflict") and the
browser marked the sketch "(editing)" or "(attachment lost)", in
English whatever the language; one degree of freedom read "1 degrees of
freedom". They now take messages: the catalogs' existing degrees-of-
freedom ones and four new ones.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch status and editing mark: the sketch's default name as shown elsewhere
The browser shows a default name in the user's language ("Skizze 1")
except on the edited sketch's row, whose mark made it a different text;
the view's status kept the stored name too. Both now use the name as the
browser shows it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Motion Study, Motion Trace, the motion plot, Explode and the contact
check drew their notes and refusals as they got them ("add a key for a
joint first", "select a point on a component", "none"), so they read
English in every language. They now go through the label translator, and
the four that no catalog carried get messages.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a sketch row inside a component (an inserted fastener's sketch)
activates that component so the sketch is edited in its placement. Finish and
Cancel only closed the sketch, so the component stayed active and every other
body stayed faded.
Edit Sketch now remembers the component and placement active before it
activated the sketch's own (also when sketch.edit activates the component of a
face-attached sketch), and leaving the sketch makes that one active again, as
Finish already puts the history marker back. A component activated while the
sketch is open stays active.
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Maya moves the camera with Alt and any button (left orbits, middle pans,
right zooms), middle drag also pans. HFSS pans with Alt+left drag and zooms
with Shift+Alt+left; its Ctrl+left orbit is the drag from empty space every
preset already has, so a Ctrl+click on geometry still adds to the selection.
The help texts are in the catalog for every locale that has the other
presets' help.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5592
* Canvas and Decal: send the picked face, so a large design takes the image (#5592)
A click with Canvas or Decal sent only the point, so the engine searched every face of every
body for it and gave up on a large design ("face capture work limit exceeded"). Send the
picked body, face index and path as Create Sketch does; canvas.decal takes that face pick too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Canvas and Decal test: drop the check that a point alone gives up
On upstream main a sketch on a face by its point alone no longer gives up on this design, so
the test keeps only what the picked face has to do: both images land on it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6039
* Sketch: offer an arc length dimension for a selected arc (#6039)
The arc length dimension already existed in the engine (sketch.dimension with
type arc_length), but nothing in the UI led to it: the Dimension tool and the
context menu always gave an arc its radius.
With exactly one arc selected, the sketch context menu now offers Arc Length
Dimension next to Sketch Dimension, which adds the dimension through the
existing command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* test: move the arc length menu test up to avoid a merge conflict
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5517
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Right-click opens the menu despite tiny pointer movement (#5517)
A Magic Mouse moves the pointer a fraction of a point as it is clicked.
The right button orbited on any movement, and the menu needed exactly
zero movement in the release frame, so most right-clicks only nudged
the view. The right button now navigates once the press can no longer
be a click (egui's click distance and time), catching up with the
travel since the press, and a right-click is egui's click.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7947
* Browser: reveal a placed body's row when it is picked or found (#7947)
The off-screen skip in `entry_row` keeps the reveal target's row alive so it
still has a rect to scroll to, but it matched `app.tree.reveal` (a world body
name) against `Entry::key` (the placement-local name). For a placed body those
never match, so the row returned early and the `scroll_to_rect` below it, which
does use `row_key`, was never reached. `app.tree.reveal` is then cleared at the
end of the frame, so there was no second chance.
Match the skip on `row_key` minus its `b:` prefix, as the `scroll_to_rect`
already does.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
The Box, Cylinder, Cone, Sphere, Torus and Coil dialogs labelled their
size rows with the command's parameter names (length, top_diameter,
section_size), in every language. Each row now takes a message: Length,
Top diameter, Major radius, Section size, translated as the rest of the
dialog is.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Fix linked component materials and appearances (#7609)
* Linked components: the cached link read carries the source properties
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Update Links: a link without recorded inherited properties is read again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preserve authored linked-face overrides and apply cached source properties
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation bar: slot model and one-row renderer (#6585)
* Navigation bar: customisation section in Preferences (#6585)
* Navigation bar: icons for visual styles, selection modes and display (#6585)
* Navigation bar: redraw the Bodies, Parts and Components selection icons (#6585)
* Navigation bar: refine the Ground shadow, Ambient occlusion, Parts and Components icons (#6585)
* Navigation bar: solid cube and a longer arc for the Ground shadow icon (#6585)
* Navigation bar: the owner accepts the new icons as final (#6585)
- Leave the running preview behind when the selection moves to another setup, asked to stop
- Keep at most two obsolete previews running; streaming, tools and other inputs wait as before
- Keep no result of a cancelled watched evaluation in the shared evaluation cache
- Test the detaching, the cancel reaching the spawned job, and the cache guard
Co-authored-by: P'tite Tête <asso@ptitetete.com>
#6471 joined the body a To Object extent runs to into the tool, whatever its component.
A connector's boss extruded up to an enclosure's face (each in its own component) merged the
enclosure into the connector, and features referencing the swallowed body failed after it.
The body it runs to now joins only when it is in the feature's own component, or when the
feature names it as a target.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4217
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: Bodies folders only where they help: Always, Several bodies only (the default) or Never (#4217)
A new preference on the Interface page, in the Layout section under Browser, sets when a
component's bodies sit in a Bodies folder of their own. Several bodies only lists a component's
lone body, when it has no groups, straight under its placement. Never lists every component's
bodies and groups there. Always keeps the folder as before. The design's own Bodies folder and a
folder hidden with its eye always stay.
One rule, browser::bodies_folded, decides it for the rows and for the menu. A folded folder
draws no row and stays open; its items move up one level, and their own eyes, hover and drops do
its jobs. While a folder is folded, its placement's menu takes the folder's Create Components from
Bodies and Group Selected; New Group and Show All were already there.
ui.prefs takes browser_bodies_folders (always, several, never) and refuses other values; saved
preferences read an unknown value as the default. The s37 scenario sets Always so that it still
checks the Bodies folder's chevron.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: Bodies folders in Arabic, Hebrew and Vietnamese too (#4217)
Arabic, Hebrew, Japanese, Vietnamese and Chinese are complete catalogues, so
every_complete_catalog_carries_every_english_message fails a new message any of them lacks. The
preference's four messages get their Arabic, Hebrew and Vietnamese text, in the words those
catalogues already use for a body and a folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2218
* Preferences: search settings across every page (#2218)
A field at the top of Preferences filters the live controls with the same scorer as command search, including a dropdown's current value and the English source of a translated label.
* Preferences search: keep the plain page list for its tests (#2218)
The production dialog always draws the search strip, so the no-header entry is test-only and no longer warns as unused.
* Preferences search: show only the settings that match (#2218)
A page name or a loose string of letters was keeping the rest of that page on screen, including notes and the mouse legend.
* Preferences search: drop stray chrome and clear from the field (#2218)
The colour swatches and folded Advanced heading were painted on every query, and the field had no way to empty itself.
* Preferences search: fold shortcut matches and drop the blank gaps (#2218)
* Preferences search: stop unmatched pages painting over the hit (#2218)
* Preferences search: a page tab clears the search and shows that page (#2218)
* Preferences search: keep OK and the graphics checkboxes in view (#2218)
A dropdown that skipped its real height on a dialog's first frame left OK outside the window, and the search strip used up the rows the graphics page needs. The shortcut fold is in the UI kit gallery.
* Preferences search: type a query and open the match from the keyboard (#2218)
A printable key or Cmd/Ctrl+F focuses Search settings, arrows move through the matches, and Enter opens that row. Escape clears the query before it can close the dialog, and clearing returns to the page that was up when the search started.
* Preferences search: translate the search strings for the complete catalogs (#2218)
Arabic, Hebrew and Vietnamese are delivered complete, so Search settings and the empty result need a translation there. German and Korean get the same two strings.
* claim: #7107
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: Delete on a picked profile deletes the curves around it (#7107)
While a sketch is being edited, a profile picked by clicking inside a
shape stands for the curves of its outer loop, so Delete removes the
shape instead of failing with "a profile goes with its sketch". Holes
inside it are shapes of their own and stay. Outside the sketch a
profile still goes only with its sketch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Delete a picked letter's whole text, not just its outline (#7107)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: new designs save as .sc
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* New designs save as .sc; .solidcraft files still open and keep their name on Save
DESIGN_EXT is now "sc"; DESIGN_EXTS lists sc, solidcraft and solvecraft and
every open path (dialogs, drag-drop, recent files, CLI, MCP, links, the web
picker) accepts all three. Save of an opened .solidcraft file writes that
file; Save As, autosave, recovery and crash reports use .sc. Windows, macOS
and Linux register .sc alongside the older extensions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Update UI tests for the .sc default extension
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon tooltips: help for the Solid > Modify tools; new toolbar commands need it (#2758)
Writes the two-sentence help for the 16 Modify tools that had none (en, fr,
ja, zh), and adds a test that fails when a toolbar command has no help; the
190 older ones are on a backlog that only shrinks. AGENTS.md, CONTRIBUTING.md
and the Adding a command guide say so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon tooltips: the help test reads the ribbon as the toolbar lays it out (#2758)
Review: commands placed by a workspace section without .at(...) were not
checked; 79 of them join the backlog. Physical Material's help no longer
promises the centre of mass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon tooltips: French help uses the glossary terms (#2758)
Matériau, Apparence and Scinder, as rlartot asked in review; Delete Face
says the hole stays open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon tooltips: the help rule fits the commands skill's size limit (#2758)
AGENTS.md became a router to skills on main, so the rule lives in
skills/solidcraft-commands/SKILL.md, kept under its 3600-character limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon tooltips: Arabic, Hebrew and Vietnamese help; the backlog follows main (#2758)
Arabic, Hebrew and Vietnamese are complete catalogs now, so the 16 texts
come in those too. Twelve toolbar commands that landed before the rule
join the backlog; the Render commands, which left the ribbon, leave it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7371
* Browser with History under it: drag the split between the two cards (#7371)
Under the browser, History took exactly half the column. The seam
between the two expanded cards is now a grip with the vertical resize
cursor; dragging it moves the split, as the column's right edge moves
its width. The split is kept as the browser's share of the column in
a new preference, browser_share, whose default is the equal split, so
nothing changes until someone drags.
Either card keeps at least its header and two rows. Folding either card
works as before and gives the other the rest; while one is folded or
folding there is no grip. A non-finite share falls back to one half.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Prefs: keep the browser share with the History-under-browser settings
Moves the entry so it no longer sits next to the render and dialog
preferences that main added after browser_width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7253
* Sketch: deleting a dimension in a rolled-back history no longer rebuilds the features after the marker (#7253)
The check before a delete evaluated the whole history twice when the
timeline was rolled back. Removing a sketch constraint changes the later
features' cache keys, so on a long history Delete on a dimension took
minutes. When the design differs only in sketch constraints (and model
parameters nothing uses any more) and each changed sketch solves to the
same geometry, profiles and ends, the features after the marker see the
same inputs: compare the live models only. Anything else still gets the
full check, so the report is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The app id moves from ai.storyteller.solidcraft to io.tangencylabs.solidcraft: macOS bundle id
(the CLI signs as io.tangencylabs.solidcraft.cli), Linux desktop/metainfo/MIME file names, icon
name, Wayland app_id / X11 class, Flatpak, Snap common-id, nfpm/FreeBSD/Nix/AppImage staging,
the web app's icon paths and the docs.
Existing installs keep working: the Flatpak repository marks both old ids
(ai.storyteller.solidcraft and ai.storyteller.solvecraft) end-of-life with a rebase straight to
the new id, re-marking the solvecraft ref that pointed at the 0.8 id; the manifest grants
read-only access to both old ~/.var/app folders and the first launch copies settings and
autosaves from the newest one; AppStream <replaces>/<provides> and X-Flatpak-RenamedFrom list
both; the AppImage removes menu entries it wrote under either old id. The data and settings
folders (solidcraft / SolidCraft) are unchanged. The MSI UpgradeCode and ProgIDs are unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7203
* Report a bug: Ctrl/Cmd+Enter continues on GitHub (#7203)
The report's fields are multi-line, so Enter adds a line break and the
only way on was the mouse. Ctrl+Enter (Cmd+Enter on a Mac) in any field
now does what Continue on GitHub does: it is read before the fields see
it, so it adds no line break, and an empty description is still asked
for. A note under the description says so, with the keys of this
computer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report a bug: keep the shortcut hint apart from the other report changes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report a bug: holding Ctrl/Cmd+Enter continues on GitHub once
egui's consume_key also matches the key's repeats, so every repeat frame
opened another GitHub tab. Only the press counts now; repeats are dropped.
The test sends the modifiers each platform really sends (mac_cmd or ctrl
together with command) and holds the key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Arabic and Hebrew for the new strings
ar and he are complete catalogs on main now (#3458): every new message
needs them. The pending-messages test compares right-to-left messages in
display order once #7532 lands (#7527).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Vietnamese for the new strings
Vietnamese became a complete catalog on main (#5823), so every new English
message needs it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report a bug: the Save screenshot test scrolls its button into view
The shortcut hint adds a line above the screenshot, which moves its
buttons below the fold of the review's scroll area at the test's size.
The test scrolls them into view first, as the other report tests do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Save as Mesh: Add all bodies and Add visible bodies buttons
Two buttons under the Bodies input fill it with every body of the design,
or with only the bodies the viewport shows.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Save as Mesh: translate the two body buttons for every complete catalog
ar, he, ja, vi and zh are complete catalogs, so every English message needs
an entry there; ko as the ui-text skill asks.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* claim: #6828
* Viewport: clear new resolve targets so AMD Direct3D 12 shows the scene (#6828)
With anti-aliasing above 1x the scene is drawn multisampled and resolved
into textures that nothing but the resolve writes. wgpu counts the resolve
as their first write and never clears them. Direct3D 12 requires a render
target placed in reused memory to be cleared, discarded or copied over
first, and some AMD Radeon drivers then show the uncleared texture as
transparent, a flat colour or speckles: no grid, origin planes or bodies
(#6828, #7157, #6613, #7052). Each new resolve texture (the frame's colour
and the see-through sums) is now cleared once when it is made.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7502
* Assembly: name placed bodies from a per-design index, reveal the Browser from the body's path, evict cache entries singly (#7502)
* Release the placement index before in-place document edits so pinning body names stays in place
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
A sketch on a face of a placed component is evaluated in that component's frame, so the
evaluator moves (and meshes) the bodies placed differently into it. FrameBodies keeps those
moved bodies, but every evaluate started a new generation and dropped what neither it nor the
evaluation before it used. Evaluations that reuse every result never touch the cache, so two
of them in a row emptied it: Delete refreshes the model three times (selection.delete's nested
refresh, its own, then execute's), and the confirmation's dry run more, and an undo answered
from the cache is another. The next edit of the sketch then moved and meshed every placed body
again: in a design of ~3,500 imported bodies each sketch edit after a Delete took 46 s, 34-43 s
of it tessellation.
The generation now starts on the evaluation's first use of the cache, so an evaluation that
moves nothing leaves it alone. It still holds at most two generations of moved bodies.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6380
* Cylinder: place by distances from reference edges, like Hole (#6380)
A Cylinder standing on a flat face can take up to two straight edges of
that face as references, each with the distance of its base centre from
the edge's line, measured in the face's plane, as a Single hole does
(#37). `solid.cylinder` takes them as `references: [{edge, distance}]`
with a numeric `base`; the edges are found again by their persistent
names, else their points, so the cylinder follows them when the part
changes, and each distance is a parameter (an input of Inspect Feature).
A cylinder without references stays at its base, as before.
In the Cylinder window, started on a picked face, Reference 1 and 2 take
the edges, each with its Distance measured from the pick, so it works
with the mouse alone; the canvas shows each distance with a box to type
it in, and Edit Feature picks the edges again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder: Edit Feature shows each reference edge input once (#6380)
A face selected when Edit Feature opened the window had already added
the reference inputs; the edit added them a second time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder references: the measured-once cost test's cylinder has none (#6380)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder: pick the face it stands on in its window, then the edges (#6380)
The Cylinder window took its place only from a face selected before it
opened, so started first it stood at the origin and offered no reference
edges. It now has a Face input before Reference 1 and 2, as the Hole
window does: start Cylinder, click the face, click the edges, OK.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Glossary: reference edge, and "Reference" among the words with more than one meaning (#6380)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder edge references: the Cone dialog (#6250) gets the references field too
The Cone primitive landed on main after this branch began; its dialog initialisers lacked
the `refs` field the Primitive kind gained here. The dense form check for Cylinder fills only
its fields: its face and reference edges place it, which the reference tests cover.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder: declare references in its contract; reference-placed cylinders are not placement-independent
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Navigation: Free orbit can turn around the vertical axis (#6964)
A new option under Free orbit, Turn around the vertical axis, makes mouse
drags a turntable without the pole limit: sideways turns about the world's
up axis (reversed upside down so the model follows the cursor), up/down
tilts over the top. Off by default; free orbit without it is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: Japanese and Chinese for the vertical-axis orbit option (#6964)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: Arabic, Hebrew, Vietnamese, German and Korean for the vertical-axis orbit option (#6964)
Main now treats ar, he and vi as complete catalogs, so the merge queue's
every_complete_catalog_carries_every_english_message failed on the two new ids.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhpMr6L9PR8SJXjM6MbQrD
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: danieldimitrov86 <danieldimitrovdev@gmail.com>
* claim: #5769
* Let body appearances replace imported STEP face colours (#5769)
A body appearance assigned in the design now replaces the face colours the
body was imported with; face appearances set in the design still win over it.
* claim: #7567
* Sketch: a drawing tool's value box takes `name = value` (#7567)
While drawing, a value box (circle diameter, line length, rectangle width and
height, slot, arc, polygon) now accepts `name = expression` and
`#name = expression`, as the Dimension tool already does: the shape is drawn at
the expression's size and its dimension defines and uses the user parameter
`name`, in one undo step.
- sketch.draw.dimensioned checks a definition's right-hand side, read as the
new parameter will hold it (a bare number in the design's unit), and passes
the text on to sketch.dimension; the reply lists `defined`.
- The value boxes size the preview and validate by the right-hand side, refuse
a definition in a box that is not a dimension (polygon sides, rounded
rectangle corner radius, conic rho), and the status line names the
parameters defined.
- Guides: parameters and sketching.
Fixes#7567
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7296
* Viewport: a frame the GPU has no memory for is drawn smaller, not a crash (#7296)
The viewport's offscreen frame, its see-through targets and the cached
still picture were created with no error scope, so a texture the card had
no video memory for went to wgpu's default handler and closed the app
("wgpu error: Out of Memory" on a GT 740). They are now created under error
scopes; a refused frame lowers the renderer's frame budget and is asked for
again smaller (less supersampling, or the view's own frame drawn smaller and
filtered up), refused OIT targets fall back to sorted see-through surfaces,
and the status line says once that the view is drawn at a lower quality.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Arabic and Hebrew for the new strings
ar and he are complete catalogs on main now (#3458): every new message
needs them. The pending-messages test compares right-to-left messages in
display order once #7532 lands (#7527).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* GPU memory test: targets take the OIT flag main added (#7296)
The test's two GpuTarget initializers predate the oit field and no longer
compiled once the branch met main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Vietnamese for the new strings
Vietnamese became a complete catalog on main (#5823), so every new English
message needs it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6003
* Save: a design changed while it is written stays unsaved, and scripts wait for it (#6003)
Two of the gaps @raykholo found in #6003 were still open on main:
- `engine.script` ran while the window's Save was being written: it calls
the session directly, past `SolveApp::run`'s file-operation guard, and
`drain_control` did not hold design-changing requests for a save. They
now wait for the save like they wait for a file being loaded or picked.
- `adopt_save` marked whatever the session held when the save finished as
saved. It now takes up the state the save wrote (`done.saved`, and its
visibility), so a change made meanwhile stays unsaved instead of being
lost on close without a prompt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6570
* test(text): cover nonpositive pitch and format-12 glyph zero (#6570)
Original synthetic font regressions. Focused native font tests, strict scoped Clippy and wasm pass. Full repository gate status is recorded in PR #6574; no CI infrastructure changes.
* Sketch: switch a circle or arc dimension between radius and diameter (#7499)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: Toggle Radius / Diameter for a circle's or an arc's dimension (#7499)
New command sketch.toggle_diameter, with input and output schemas, and a
context-menu item on a single selected radius or diameter dimension. The
circle keeps its size: the dimension's parameter is halved or doubled (a
plain value is rewritten, an expression is wrapped). Refused, with nothing
changed, when anything else uses that parameter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>