Commit Graph
21 Commits
Author SHA1 Message Date
JEREMYandjeremymiribung-blip 382680d8e8 fix(skills): refresh Boolean checking facts that fail on current release (#1835) (#2093)
* fix(skills): refresh Boolean checking facts that fail on current release (#1835)

* fix(skills): restore warning coverage in test_run and use present tense in Boolean facts

* fix(skills): the slot keeps its side at zero since the solver takes the shortest step

The upstream solver now takes the shortest step that fits (#2060), so the slot
that other constraints also held slides to the origin when the distance reaches
0 and keeps the side it was drawn on when the value comes back. It no longer
comes back mirrored, so the trap and its test state the current behaviour.

---------

Co-authored-by: jeremymiribung-blip <jeremymiribung-blip@users.noreply.github.com>
2026-10-21 00:41:45 +00:00
e27d43553c Sketch Dimension: line to circle/arc edge (#1803) (#1863)
A line and a circle or arc can now be dimensioned to the circle's edge
(ConstraintKind::LineCircleDistance, saved as line_circle_distance): the gap
while the line misses the circle (0 is tangency), or how far the edge reaches
past the line when it cuts through (stored as `inside`).

Rebased onto main as one commit (the branch's own changes; its merges of main
dropped). Conflicts resolved: the test mod lines in cmd/sketch.rs (both kept,
sorted), and README.md, whose feature list main moved to docs/capabilities.md;
the line-to-circle dimension is listed there now.



Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

Co-authored-by: jyviko <jyviko@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 03:44:16 +00:00
Matt Ruhland 91753051a1 docs(skills): multi-body primitives, mirror body names, unit suffixes, set_parameter call (#2964)
Add body_name and targets to the solid.box and solid.cylinder rows, the
bodies form of solid.mirror and the names its bodies get, unit-suffixed
parameter values, and the set_parameter argument shape.
2026-10-19 23:56:19 +00:00
NOWN-DEV 539c17b425 Joint sweep: drive a joint until parts touch, and report where (#1981)
Joint sweeps can stop where parts touch and report the contact and remaining room.
2026-10-19 16:07:44 -04:00
MateuszSychXpl 8fdf6a61a2 Motion analysis: plots of a study's joint values and a point's path, and the parts that collide along it
- motion.plot: joint values and a point's path sampled as the study plays (closed loops
  following), with velocities and accelerations by finite differences, per step or per
  second with a duration.
- motion.interference: the pairs of parts that pass through each other along a study, with
  the first step, the step ranges, the depth and the shared volume; occurrences, against
  or contact sets choose the pairs; bounded samples and work.
- Motion Study dialog: a Study box opens a saved study; a chart of a joint value or a
  picked point with a cursor at the step shown (click to move there); Check collisions
  with the steps shaded on the chart. ui.start motion.study takes study.
2026-10-16 17:52:38 +02:00
Mateusz Sych 6232fa33c2 Joints: cam and follower coupling (joint.cam) (#1734)
Thanks @SychPL.
2026-10-16 10:26:35 -04:00
DuBearte dd5278a402 solid.hole: position takes length expressions and follows them (#1678) (#1683)
Thanks @DuBearte.
2026-10-16 08:26:23 -04:00
Mateusz Sych 2ae21143ee Motion animation export: a study or a joint drive as an animated GIF (#1680)
Thanks @SychPL.
2026-10-16 07:26:15 -04:00
Mateusz Sych 571122c4ba Motion Trace: a point's path as a joint is driven or a study plays, kept as a 3D spline (#1529)
Thanks @SychPL.
2026-10-16 01:54:34 -04:00
Mateusz Sych 4d862cd76c Joints: joint.reach (inverse kinematics), and a jointed part follows a drag (#1540)
Thanks @SychPL.
2026-10-15 23:58:34 -04:00
Erikas a422fb1a4b solid.mirror: a plane's {origin} takes length expressions and follows them (#1492) (#1501)
Thanks @erkexzcx.
2026-10-15 22:37:08 -04:00
f7967b1ff6 Joints: gears, rack and pinion, and screws (#1524)
Motion links can carry a coupling (gear pair, rack and pinion, screw) whose ratio follows radii, picked round faces or pitch. Design format 23.

Co-authored-by: SychPL <SychPL@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-15 18:47:38 -04:00
Mateusz SychandSychPL 02fe495d38 Joints: a link ratio between an angle and a distance is per degree (#1433)
A motion link's ratio is read in b's units per a's (mm per degree, degrees per mm) when an angle and a distance are linked; stored values stay per radian, so saved designs are unchanged. Follow-up to #1415.

Co-authored-by: SychPL <SychPL@users.noreply.github.com>
2026-10-15 14:05:24 -04:00
Mateusz Sych c2ba3657f3 Joints: link offsets in b's units, new joints start inside their limits, loop dof at dead points (#1415)
joint.motion_link offset is read in the linked value's units (degrees or mm, or an expression); links are still stored in radians, so saved designs open unchanged. A new joint whose values fall outside its limits starts at the nearer limit, stores it, and says so in warnings. Loop dof also counts at a nearby pose, so a part at a dead point of its loop keeps its mobility. The mechanisms skill is updated to match.
2026-10-15 12:45:48 -04:00
Mateusz Sych 4674f0a61c Joint dialog: say why picks on one component make no joint (#1367)
The Joint and As-built Joint dialogs explain why picks make no joint and offer Create Components from Bodies when every pick is on one component; joint.create and joint.as_built suggest component.from_bodies. Labels in all catalogs. Fixes #1239.
2026-10-15 08:22:54 -04:00
Mateusz Sych 81d9b7e04a Agent skill for mechanisms: joints by coordinates, loops, links, motion (#1315)
A solidcraft-mechanisms agent skill with a worked example that a test replays through the MCP server (the actuator follows the hinge with the stated stroke and the drive stops at the rod's limit); the skills index and docs/mcp.md list it.
2026-10-15 02:13:48 -04:00
NOWN-DEV 5c6f70cc00 Faces by name in the face commands; model.faces gives a point on each face (#1243) 2026-10-14 20:18:13 -04:00
Igor Churmeev f037c92370 Add the solidcraft-checking skill (#880) 2026-10-13 22:37:07 -04:00
Mateusz Sych 17db109c5d URDF export for robot simulators (#719) (#942)
A design with components and joints exports as a URDF robot description (file.export to .urdf, the MCP export tool, solidcraft-cli run --out, File > Export URDF...). It writes one binary STL per component in metres, links with mass, centre of mass and inertia from material density, and maps rigid, revolute, slider, cylindrical, pin-slot, planar and ball joints to URDF joints or short chains. Loops, broken joints and loose parts are reported as warnings. Options: mesh_prefix, effort, velocity. Docs in docs/urdf.md.
2026-10-13 21:52:30 -04:00
Igor Churmeev 95d394dcab Modeling skill: rim fillets after shell, slots along Y, boolean retry caveats (#879)
Corrects the modeling skill: an edge of the face a shell removes is rounded after the shell, a slot along Y is dimensioned horizontally, long shallow arcs measure to about 0.1%, and a boolean retry warning can hide wrong geometry when the volume does not match.
2026-10-13 18:46:47 -04:00
Mateusz Sych be55a49b04 docs: agent skills for modeling and editing through MCP (#728)
Two agent skills for modeling and editing through the MCP server, with a command reference and model-only screenshot examples.
2026-10-13 12:49:02 -04:00