Commit Graph
91 Commits
Author SHA1 Message Date
f815491936 2-tangent circle: start from the touching circle, not the click (#3141) (#3210)
* claim: #3141

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 2-tangent circle: start from the touching circle, not the click (#3141)

The tool passed its second click as the place to start solving, and a
click lies on a curve: the circle began centred on that curve, where its
tangency has no side yet. The solve then moved the user's curves to fit
(a rectangle came out skewed), or failed outright when they were fixed.
The command now starts from the centre, nearest the requested point, of
a circle of that radius touching both curves (where the curves moved by
the radius meet), and the tool asks for the circle between its two clicks.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:15:34 +00:00
JakobonlyandClaude Opus 5.5 23b0120759 Sketch: a radius dimension past an arc's end extends the arc to its arrow (#3393) (#3408)
* claim: #3393

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

* Sketch: a radius dimension past an arc's end extends the arc to its arrow (#3393)

A radius or diameter dimension on an arc whose leader is dragged past the arc's
ends had its arrow pointing at empty space. The radial frame now keeps the arc's
span, and an arrow outside it gets the arc continued from the nearer end round
to the arrow tip and a little past it, as dimension drawings do. Full circles,
ellipses and arrows on the arc are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 15:40:26 +00:00
takuto-NAandbherbruck 843c0bf97a Reduce repeated sketch diagnostics and enable normal-CI profiling regressions (#2355) (#2359)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 13:55:25 +00:00
takuto-NA d8eb65d26e Make constrained sketch edges follow the cursor (#3360) (#3362)
* claim: #3360

* Fix constrained sketch edge following and final drag coordinates
2026-10-20 12:43:59 +00:00
fe3b14e798 refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)
* Iterate instead of indexing in nine loops

Replace index loops that look up neighbours by position with enumerate,
zip(cycle().skip(1)) for wrap-around pairs and zip(skip(1)) for
consecutive pairs. No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: ring_edges for the edges of a closed ring

Every walk over a polygon's edges, the last back to the first, spelled
x.iter().zip(x.iter().cycle().skip(1)); eighteen of them now call
geom::ring_edges. Three redundant take(len) calls go with them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Ring, a closed ring that knows it is closed

A Ring holds items in order around a closed polygon, loop or fan; edges()
walks each with the next and the last with the first, corners() each
with both neighbours. Ring<Vec2> has signed_area and even-odd contains.

Loop2::polyline returns a Ring, as do doc's face_loops and
boundary_loops, kernel's coplanar wire samples, CapLoop's segments,
tess pieces' rings, the gizmo's plane quads and the navigation cube's
facets. Their walks take edges() or corners() instead of wrapping an
index; sketch's text-hole test and doc's poly_area become contains and
signed_area. Loop2::joints pairs each segment with the next.

Replaces the ring_edges free function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain, Ring and Path; bounds for a chain of points

Ring becomes Chain<T, Closed> beside Path = Chain<T, Open>: edges()
closes a ring and stops at a path's end, Path::close makes the ring,
and bounds() (the empty box for no points) serves both. Eight
hand-rolled min/max folds over a loop's polyline call bounds(); doc's
flat_polyline returns a Ring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area and inside on Ring for any planar point

Ring's signed_area and contains take any Planar point (Vec2 or
[f64; 2]). The cam profile in joints_cam is a Ring: its own even-odd
test goes, and its edge walks, gap and area take edges(). face_params'
loop area, the text path's winding, tess pieces' ring area and the
copies in three tests call signed_area or contains; the formulas are
the same term for term.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: sheet's closed outlines go through Ring

dedup takes and returns a Ring (dropping a last point back on the first
is what makes it a ring's), near_outline walks a Ring's edges, and the
copy of it beside fold checks calls it. point_in goes: its callers ask
the Ring. Its formula anchored each crossing on the other end of the
edge, so the two can differ only for a point on an edge to the last
digit; one caller sets such points aside first, the others test a
region's interior point, a cut's midpoint or another outline's corners.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: cam tests build their outlines with Ring::from

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area_vector on Ring<Vec3>; three Newell sums use it

Ring<Vec3>::area_vector is half the sum of a × b round the ring. heal's
loop_area, lip's outer-loop turning and the revolve's loop orientation
summed it by hand with a wrapped index; they take it from the Ring
(the half is exact, and two of them only read its sign).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3 from points; boxes built and asked through it

Aabb3 collects from points (skipping non-finite ones, as add does) and
gains inflated, contains and meets. Fifteen hand-rolled min/max folds
over points or boxes in kernel, doc and engine become collect or union,
and their "within tol of the box" tests become inflated(tol).contains.
blend's refused-edge boxes and naming's face index hold an Aabb3.

A NaN point is now outside every box, where the old negated
comparisons let it in; an infinite point no longer stretches a box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb2, the plane's box; 2D folds and box tuples use it

Aabb2 mirrors Aabb3 (collect, add, union, inflated, contains, meets)
and adds relative, a point's place in the box. sketch's link and
link_loops each had that formula; link_loops' boundaries, prism's
segment and loop boxes, profiles' shape boxes and grid, and ends'
segment box hold an Aabb2 instead of a (low, high) pair. Folds in the
cam, sketch bounds, sheet's perforation grid and the sketch clipboard
collect one.

Boxes are built from the same terms (a round's box keeps c - r - tol).
As with Aabb3, a NaN point is outside every box and an infinite point
no longer stretches one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel: prism's segment boxes are plain Aabb2s

The SegBox alias named a (low, high) pair; Aabb2 says it itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain::bounds is an Aabb2; the boxes #2382 left as pairs follow

Chain::bounds returns an Aabb2. Its callers keep it: sheet's hole and
cut boxes (loop_box), letter boxes, island outlines and line-near-cut
test use meets, contains and inflated; profile's outline overlap and
max_clearance, profiles' box tests and the cam test read its corners.
flat_size and the flat pattern's JSON size are the union of the loops'
boxes (0 × 0 for no loop, where the pair fold gave -∞).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3::intersection; hand-grown and hand-met boxes use the box

Aabb3::intersection is the box both hold. ops' four overlap boxes of a
boolean's operands take it, and seven boxes grown by hand (ops' body
boxes, the distance set's bounds, coplanar's face box, eval_more's
padded mesh box, compare's group and region boxes) call inflated with
the same amount on every side.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:44:49 +00:00
e27d43553c Sketch Dimension: line to circle/arc edge (#1803) (#1863)
A line and a circle or arc can now be dimensioned to the circle's edge
(ConstraintKind::LineCircleDistance, saved as line_circle_distance): the gap
while the line misses the circle (0 is tangency), or how far the edge reaches
past the line when it cuts through (stored as `inside`).

Rebased onto main as one commit (the branch's own changes; its merges of main
dropped). Conflicts resolved: the test mod lines in cmd/sketch.rs (both kept,
sorted), and README.md, whose feature list main moved to docs/capabilities.md;
the line-to-circle dimension is listed there now.



Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

Co-authored-by: jyviko <jyviko@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 03:44:16 +00:00
e4d9015f68 sketch: points placed by expressions (#2864)
* Sketch points placed by expressions over the design's parameters

A point typed as an expression ("W", "H / 2") in sketch.point, sketch.line and
the other point arguments is fixed where its expressions come to, and moves
there again before each solve when the parameters change: an outline that
follows its parameters needs no dimensions and no solve per change. The
expressions are saved with the point (one pending design-format change), listed
with the sketch's other expressions, and renamed with their parameters; one
that cannot be worked out is refused.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Sketch point expressions: accurate params doc, out-of-range regression test

The sketch.line params said every point argument takes expressions; only those that
also take a point id do (the rectangle corners, an arc's through point and the like
are plain [x, y]). PointExprs' comment called its expressions mm. A test covers a
parameter that puts a placed point out of range and a design file whose point
expression overflows: both are errors, not crashes, and the sketch recovers.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 13:05:28 -04:00
takuto-NA 3a9b053f5b Fix constrained point dragging within the shared frame budget (#1976) (#1977) 2026-10-19 07:24:04 -04:00
leValdemar19andClaude Opus 5.5 86b2b97d6f Sketch Offset: constrain to the ends of an offset spline (#2424) (#2615)
* claim: #2424

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Offset: constrain to the ends of an offset spline (#2424)

An associated offset spline hid all of its generated fit nodes, its two
end points included, so nothing snapped to them, and a curve drawn from
one shared the node and was refused ("invalid offset output point roles").

- An open offset's end points are shown and snapped to again; its
  interior fit nodes stay private.
- After every sketch edit, a curve that took an offset node gets its own
  point there, coincident with the node: the offset keeps sole ownership
  and the curve follows the offset when its source moves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Scenario: lines snap to and close onto an offset spline's ends (#2424)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:43 -04:00
bherbruckandClaude Sonnet 5.5 9eb1540a34 Docs: describe SolidCraft as independent CAD (#2768)
Reword comments, docs and package descriptions so they describe SolidCraft's own behaviour instead of comparing it to another product. The trademark notice, the commercial-CAD rule and the navigation preset name stay as they were.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 21:16:11 -04:00
JIJINBEI 932efbf341 Sketch drag: move only what the constraints need (#2060)
Thanks @jijinbei.
2026-10-18 02:23:24 -04:00
JIJINBEI 2acc344aa4 Sketch: show open and untied profile ends (#2000) (#2001)
Thanks @jijinbei.
2026-10-17 18:52:12 -04:00
Mateusz Sych a2245b2f51 Sketch profiles: a line passing next to a junction splits the loop it crosses (#755) (#1879)
Thanks @SychPL.
2026-10-17 04:08:43 -04:00
midasdf bbd4f29ebb Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)
Thanks @midasdf.
2026-10-16 06:26:27 -04:00
midasdf 07da7f8065 Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)
Thanks @midasdf.
2026-10-16 03:26:20 -04:00
Mateusz Sych 571122c4ba Motion Trace: a point's path as a joint is driven or a study plays, kept as a 3D spline (#1529)
Thanks @SychPL.
2026-10-16 01:54:34 -04:00
Karl Von Richter 371578a06f Feat/Sketch: associative pattern tools with independent directions and Flip/Center controls (#1601)
Thanks @Karl-VonRichter.
2026-10-16 00:32:32 -04:00
DuBearte 987f0be21e Sketch: infinite construction lines (#1359) (#1547)
Thanks @DuBearte.
2026-10-15 22:54:16 -04:00
bherbruckandClaude Opus 5.5 843c548589 Copy, cut and paste sketch geometry (Ctrl+C/X/V, context menu) (#1500)
* Copy, cut and paste sketch geometry (Ctrl+C/X/V, context menu)

Sketch geometry had no copy or paste: Ctrl+C / Ctrl+X / Ctrl+V arrive as
clipboard events that nothing handled, and the sketch context menu had no
Copy, Cut or Paste.

- sketch.copy / sketch.cut / sketch.paste: lines, arcs, circles, ellipses,
  splines, conics, points and text. Constraints and dimensions wholly among
  the copied entities come along (each dimension gets its own parameter
  with the same expression); ones that reach outside, fixes and pattern or
  offset relations are dropped. Paste goes centred at `at`, by
  `translate`, or offset from the original (same sketch) / at the same
  coordinates (another sketch, on its plane). One undo step; the pasted
  geometry is selected.
- Ctrl+C / Ctrl+X / Ctrl+V in a sketch (paste at the cursor), and Cut,
  Copy and Paste in the sketch context menu. Outside a sketch Ctrl+C /
  Ctrl+V copy and paste the selected timeline features. A copy also puts a
  line of text on the system clipboard so the next Ctrl+V is delivered.

Fixes #1480

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Keep a pasted text's height and angle expressions, drop its place's

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 15:55:10 -04:00
NOWN-DEVandNOWN-DEV b6806b16cf feat: a sketch text's height, place and angle can be expressions (#1453)
A sketch text's height, place (x and y) and angle can each be an expression over the design's parameters, and the text follows parameter changes, undo and reopening. Closes #1362.

Co-authored-by: NOWN-DEV <NOWN-DEV@users.noreply.github.com>
2026-10-15 14:57:36 -04:00
bherbruckandClaude Opus 5.5 ef53bc46f3 Sketch: the first dimension scales a sketch drawn by eye (#1365) (#1416)
* Sketch: the first dimension scales a sketch drawn by eye (#1365)

Lines drawn by eye have no size of their own until a dimension gives them one, but the first
dimension kept every other drawn length and distorted the sketch to fit (a free construction
line through the origin turned instead of the shape moving). The dimension tool now scales
the whole sketch about its origin to the first length dimension, as long as nothing in the
sketch fixes a size yet: no other driving length dimension, nothing fixed, projected or
patterned. Every geometric constraint and angle holds on the scaled sketch. Later
dimensions size what they measure as before; sketch.dimension does this only with
scale_sketch: true, so scripts are unchanged.

Fixes #1365

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Scenario s01: dimension the box's height too, now that the first dimension scales the sketch

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 13:13:14 -04:00
bherbruckandClaude Opus 5.5 bbfad166b0 Sketch: a dimension's extension lines reach the nearest part of the lines it measures (#1361) (#1388)
A dimension to a line, or between two parallel lines, drew its extension lines from the
measured end point and its foot on the other line, so they ran the whole length of the
lines to wherever that end happened to be. They now start from the nearest point of each
line to the dimension line, and disappear where the dimension line already crosses it.

Fixes #1361

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 08:38:38 -04:00
Lasse Lian 9fbbf8dc3a Edit Sketch no longer shows bodies a later feature deletes (#1329)
Fixes #1167. While a sketch is edited, a body that a rolled-off, unsuppressed Remove deletes is not shown (unless the sketch is built on it); the history stays rolled back, only the view changes. Drawing, picking, screenshots, thumbnails and the browser's Bodies folder agree; document.inspect reports removed_later. Checked on main + this branch: cargo check --workspace, the engine sketch_edit_removed/occurrences tests and the UI viewport/browser tests.
2026-10-15 06:34:01 -04:00
Karl Von Richter 9a4e8fbd19 Sketch: associative, editable sketch patterns (#1103)
Rectangular and circular sketch patterns stay linked to their source: editing the pattern's count, spacing or the source geometry updates the copies, and the copies keep their point and radius relations. Patterns are saved under format 20; older designs keep their independent copies.
2026-10-14 14:09:37 -04:00
Mateusz Sych c469adf456 MCP: an agent's folders hold for file loads through the app and for a design's font files (#1112)
doc.open and the STEP/mesh imports run on the file loader's worker with the request's path scope, and a font named by file path in a design is checked against the scope before it is read.
2026-10-14 13:58:56 -04:00
Mateusz Sych 94faf9ce1b Close kinematic loops: driven joints move four-bars and sliders (#1141)
Driven joints now solve closed kinematic loops, so a four-bar or slider-crank moves as a whole when one joint is driven.
2026-10-14 13:40:16 -04:00
Lasse Lian 6df69e9def Thin Extrude: walls of a set thickness along sketch curves (#721) (#991)
Thin Extrude builds walls of a set thickness along sketch curves, open chains and closed loops, with the wall centred, inside, outside or on both sides at two thicknesses. Saved under format 20 (thin on an Extrude); an extrude without thin saves as before. Closes #721.
2026-10-14 11:46:16 -04:00
bherbruckandClaude Opus 5.5 d019f2d5bf Straight edges stay one edge after cuts (#1049) (#1101)
* Straight edges stay one edge after cuts (#1049)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Robustness goldens: cuts join straight edges along untouched walls (#1049)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fmt

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Robustness goldens note: what each changed seed shows when replayed on both builds

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 10:51:07 -04:00
Karl Von Richter 9ca7d307a4 Offset of an irregular closed spline no longer fails its error certificate; offset fit nodes stay private (#1009)
Fixes #971. At the node limit the offset certificate splits the fitted curve where it meets the exact offset midpoint, so curves with different parameter speeds certify within the same 0.002 mm tolerance. Associated offset fit nodes are hidden from display, picking, box selection and snapping until Break Association.

Thanks @Karl-VonRichter.
2026-10-14 05:27:39 -04:00
Karl Von Richter 47a7f29485 Guide sketch patterns with live previews and editable offsets (#966)
Sketch Mirror, rectangular and circular Pattern, and Offset now show a green live preview that follows the selection and settings; OK commits, Cancel leaves the sketch unchanged. The shared dialogs show the current selection step and source counts, sources can be toggled with Ctrl/Cmd-click, cleared and reselected.

Offsets keep editable driving distance dimensions (One Side, Two Sides, Symmetric) that update the derived curves without moving the source, with undo/redo and save/reopen. Format 19: older files keep their fixed offsets.

New dialog labels in en, zh, ja, de and ko.

Fixes #696. Fixes #517.
2026-10-14 01:58:01 -04:00
Nathan Dane 9f76cca8b4 Collect application resources for #433 (#833) 2026-10-14 00:49:32 -04:00
phanoob dd7790a43f Sketch text: bold and italic, text along a curve, alignment and spacing (#852)
A sketch text gets an optional style: bold and italic faces (a slanted fallback for italic), left/center/right alignment, letter and line spacing, and a path curve of the same sketch for the baseline to follow (reverse takes the other side). Edit Text gets B/I toggles, alignment, spacing fields and a Path chip, all live. The style is saved only when not plain and is noted under format 18.
2026-10-13 19:27:35 -04:00
Kevin Ravensberg 96f6424aec fix: confine MCP agents' files to allowed folders; recovery discard deletes only recovery entries (#205) (#578)
Agent tool calls (MCP, and bridged control requests carrying allow_paths) reach files only in the open design's folder (strictly inside home or the temporary folder, not in a hidden folder, and never its hidden files), the app's recovery folder, the server's private scratch folder and each --allow-path; --allow-any-path lifts the limit. Paths are resolved first, so .. and symlinks that lead out (including a save through a link, #845) are refused. On Windows, UNC, device, NT, verbatim non-drive, drive-relative, alternate-stream, reserved-device and 8.3 short-name paths are refused before any file system call, and the resolved path must be on a local drive. doc.recovery_discard and doc.recover {discard} delete only real recovery entries. Docs: mcp.md, control-protocol.md, README.
2026-10-13 18:24:08 -04:00
froglemonade2 c3e0ea498a fix: joins, cuts and sketch profiles where outlines touch at a point (#841)
Fixes #588.
2026-10-13 16:33:24 -04:00
phanoob ec5d7f9789 Sketch text: live Edit Text from the Text tool, a font list, handles, and whole-text picking (#821)
Live Edit Text from the Text tool, a font list, handles, and picking the whole text.
2026-10-13 16:29:37 -04:00
William Dunn d302aa1a00 Construction Geometries, a Sketch Palette row that hides construction geometry (#804)
A Sketch Palette toggle (sketch.options show_construction) that hides construction geometry from drawing and picking; saved with the sketch's view options under format 17.

Co-authored-by: William Dunn <william.dunn@quasarke.com>
2026-10-13 15:15:13 -04:00
semmelrinde 159f9913c1 fix(sketch): a side put onto a projected line keeps its closed profile (#635) (#780)
A side constrained onto a projected line keeps the sketch's closed profile. Fixes #635.
2026-10-13 12:35:33 -04:00
NOWN-DEV 58af8accfa fix: a projected edge stays the edge that was picked when its body changes (#730)
A sketch's link to a projected edge now keeps the edge's persistent name and finds it by that name when the body changes, instead of taking whichever edge ends up nearest its point.
2026-10-13 12:06:13 -04:00
William Dunn aae70053ee Let the conic tool take a typed Rho, and preview the curve it is about to draw (#736)
The conic tool takes a typed Rho in its canvas value box and previews the curve it's about to draw, with the tangent legs as a faint guide.
2026-10-13 11:47:28 -04:00
bherbruckandClaude Opus 5.5 9ba72e118b Sketch: accept redundant but consistent constraints (#687) (#699)
A clover of same-size rectangles drawn around a shared corner was refused as over-constrained.

Constraints that remove no degree of freedom but still hold (zero residual) are now kept and shown dimmed as redundant. Conflicting ones are still refused. A redundant driving dimension is refused with "already determined by ...". Typed sizes become driven (reference) dimensions. Drawing no longer adds Horizontal/Vertical to a side that is already implied through two coincident corners. The solver reports redundant constraints using a Jacobian row-dependence test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 10:12:55 -04:00
NOWN-DEV 24974e6f37 fix: a dimension from linked geometry keeps its side when the source moves past it (#614)
A point dimensioned from linked geometry (projected, included or intersected) keeps its side when a parameter moves the link's source past it: the solve reads sides and turns from the stored state instead of from beside the moved line, both on recompute and when editing the sketch.

Co-authored-by: NOWN-DEV <257771410+NOWN-DEV@users.noreply.github.com>
2026-10-13 05:15:15 -04:00
NOWN-DEVandClaude Opus 5.5 a69c2928f0 feat: sketch text takes a font, an installed family or a font file (#516)
sketch.text and sketch.edit_text take an optional font: an installed family or a .ttf/.otf/.ttc file. Edit Text gets a Font field. The font is kept with the text under format 16; no fonts are bundled, and the font search is bounded.

Fixes #513

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 02:04:59 -04:00
NOWN-DEVandClaude Opus 5.5 c2a9c71436 fix: text extrudes as letters with their counters, alone or beside drawn curves (#502)
Text outlines count as drawn geometry when picking profiles, and "all profiles" leaves out the counters of letters (the holes of A, B, 8), so text extrudes as letters with their holes whether or not other curves are drawn next to it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 00:25:39 -04:00
MqriusandClaude Opus 5.5 bb431f7ac2 fix(sketch): merged adjacent profiles have whole edges where shared ones ended (#509)
When adjacent profiles are merged for one extrude, collinear lines on either side of where a shared boundary ended are joined back into one edge, so the body has no split faces or extra vertices for later booleans to trip on.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 00:11:59 -04:00
Irakli KourtisandClaude Opus 5.5 0dee9deec1 Sketch constraints accept x / y for the sketch's own axes (#394) (#448)
`sketch.constraint.symmetry` (line), `parallel`, `perpendicular`,
`collinear`, `tangent` and `coincident` (point on curve) now take `x` /
`y` for the sketch's own axes, matching what `solid.revolve` means by
lowercase x|y. A real curve with that id still wins.

An axis becomes a linked construction line on it: a new
`LinkSource::SketchAxis` resolved in sketch coordinates, so it stays on
the sketch's axis on any plane, is shared by every constraint on that
axis, is left out of profiles and is reported in `created`. Equal,
concentric, midpoint and horizontal/vertical keep refusing axes, since
the axis line's finite length or fixed direction would make them
meaningless.


Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 20:31:35 -04:00
bherbruckandClaude Opus 5.5 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
Iraklis KourtisandClaude Opus 5.5 fe4d171e22 feat(sketch): live drag that keeps its solution, ended by sketch.drag_end (#341)
* feat(sketch): constructive solving ahead of the numeric solver

Part 1 of splitting #251: the sketch crate only. A graph-constructive front
end (Owen 1991; Fudos & Hoffmann 1997) places what it can by ruler-and-compass
loci and cluster decomposition, Levenberg-Marquardt finishes and verifies the
rest, and the rank analysis stays authoritative for degrees of freedom. Solves
can follow a reference (the previous solution), so edits and drags keep their
branch instead of flipping.

New API: solve_with (hold, reference, analysis, budget) and
solve_after_value_edit; solve and solve_holding keep their signatures as
wrappers, so no caller changes here.

When the seed moves an arc's centre, the arc's unconstructed ends start carried
along (the arc translates) instead of left behind for LM to turn; found by the
reference test 20-slot-constrained.

Refs #203

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44

* feat(doc): keep a sketch's solved state across value edits

Part 2 of splitting #251 (builds on part 1, the sketch crate):
- Sketch edits solve for the document's values continuing from the stored
  solved state (Document::solve_sketch), so a dimension edit keeps the
  sketch's branch instead of re-solving from scratch.
- A value edit (parameters, a configuration, the units) that would make a
  sketch that solved before fail or turn over is refused with the
  conflicting constraints named; otherwise the solved sketches are written
  back into the document (Model::adopt_solved_sketches), which changes what
  saved designs store.
- Later features are keyed by a sketch's solved geometry (to a 1e-6 mm
  quantum), so setting a value back reuses their earlier results.
- Solved sketches in a model state are shared (Arc) between states.

Refs #203

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44

* feat(sketch): live drag that keeps its solution, ended by sketch.drag_end

Part 3 of splitting #251 (builds on part 2):
- sketch.drag follows a long move in short held steps, so the geometry keeps
  its branch, and reports how far it got (reached, at).
- live: true runs one frame of an interactive drag: the sketch is solved
  once and shown, later features keep their last result (marked stale)
  until sketch.drag_end or any command that reads the model evaluates it
  (CommandSpec::live, reads_model, doc_only).
- sketch.drag_end adds the constraint the drag let go on and evaluates the
  model once.
- Undo and redo evaluate a new document once (execute does) instead of
  twice.
- The viewport drives drags through live frames and drag_end; dimension
  text drags start only off sketch geometry.

Refs #203

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 13:45:48 -04:00
bherbruck af536a7907 Rename displayed product to SolidCraft and add header bug reporting 2026-10-11 16:16:48 -04:00
Matt 78f80143d5 fix: hold the sketch caps at design load and bound the solver per component
Nothing on the load path checked a sketch's size, and every sketch in the
timeline is solved when a design opens. The solver sizes its dense matrices by
the connected component, so a 30 MB file with 200,000 chained points asked the
allocator for terabytes and the process aborted, which no panic guard can
intercept.

Reject an oversized sketch while the design is still raw JSON, so the typed
arrays are never built, and refuse a connected component with more variables
than fits in a bounded matrix: that component now reports a failed solve and
leaves its geometry alone. 10,000 chained points went from 9.6 GB and 25
seconds to a failed solve in well under a second.

Fixes #145

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
(cherry picked from commit 04abbf95c26f68c7d0a126ed9e2827049f593361)
2026-10-11 08:22:11 -07:00
bherbruck 0167c358bb Merge upstream profile picks and flush-pad fixes with adaptive identities 2026-10-11 09:43:16 -04:00