* STEP import: mesh band faces that wrap around a closed surface correctly
Fixes two related bugs that caused SolidCraft to fail to mesh a face wrapping
all the way around a closed, non-periodic surface (a revolved ridge band, or a
tube-shaped B-spline surface): a missing face, a folded/self-overlapping
triangulation, or a hole in the rendered body.
1. Ring edges that run slightly off their surface. STEP files write a surface
and the curves bounding it to the file's own declared uncertainty, so a
ring edge can legitimately sit a few micrometres off the surface it
bounds. The code finding where a ring edge crosses the planned split line
compared against the edge's raw (off-surface) point using a hardcoded
tolerance far stricter than the file's own precision, rejecting a valid
cut. Now matches against the point on the surface directly below the ring
crossing, respecting the file's declared tolerance.
2. Closed B-spline surfaces, their slits and their slivers. truck only treats
the rotation of a revolved surface as periodic; a face on a B-spline
surface whose control net closes on itself (a tube) wasn't recognized as
wrapping around at all. This produced a folded face, a hole (a boundary
loop landing a full period away from where it should cut), and one
near-zero-width sliver face costing the entire body its tessellation
plan. Adds periodicity detection for closed B-spline surfaces, period-
aware hole-loop alignment, dropping of zero-width slit boundaries, and
isolating a too-thin-to-triangulate face so it no longer takes the rest
of the body down with it. The GPU shader's periodic wrap mirrors the CPU
math so the two don't drift apart.
Regression tests: band_faces_split_when_ring_edges_run_off_their_surface,
band_face_with_a_zero_width_slit_is_still_meshed,
a_sliver_face_too_thin_to_triangulate_does_not_cost_the_body_its_plan.
Ablation-tested: disabling either mechanism in (2) reproduces its target
test's original failure message while leaving the other test unaffected.
* STEP import: mesh the band's split faces, not just split them
jyviko asked whether a band wall missing from the interactive app's render
was a shading issue or a genuinely missing face. It was missing: the ring-
edge split fix made the band's topology correct, but plan_face still
produced zero triangles for the two new sub-faces.
Two causes, both in plan_face (crates/kernel/src/tess/mod.rs):
1. The tolerance for how far an imported boundary may lie off its surface
was tied to the requested mesh's chord tolerance instead of to the
body's own size. A finer display tolerance could then reject a boundary
a coarser one had just accepted, so the face would drop out exactly when
zooming in on it.
2. Near a sharp corner of this flat-panelled band, several boundary points
that are legitimately a few micrometres apart (within the STEP file's
own declared precision) all projected onto the same surface point. The
boundary loop then repeated a point in (u, v), which a triangulator
can't follow, so the face's plan failed outright. One face without a
plan costs the whole body its plan, and the fallback mesher can't
handle a closed B-spline surface either, leaving both halves of the
split band with no triangles at all: present in the topology, invisible
in every renderer, and absent from the body's volume.
Fix: scale the off-surface tolerance to the body's own extent (new
Rules::extent), and collapse a run of boundary nodes that land on the same
surface point to one (drop_collapsed) before triangulating.
Regression test additions to band_faces_split_when_ring_edges_run_off_their_surface:
the body's volume now matches the analytic pentagon prism (was a third of
it - only the top cap - before this fix); display_plan leaves no face
without triangles from coarse to fine tolerance; and the actual tolerance
and facet angle the viewport draws with gives the split band its full
lateral area on both halves.
Confirmed on review_band_big.step, the fixture behind the review screenshots:
volume's relative error against the analytic pentagon prism drops from
1.4e-4 to 4.1e-6, and the band wall now occludes the floor grid behind it
in a snapshot the same way the top and bottom caps always did.
Full kernel suite: 739 tests, 0 failed.
* STEP import: hold an imported boundary to the file's own tolerance, not the part's size
jyviko: the off-surface acceptance added in the last commit
(rules.extent * OFF_SURFACE) scaled with the part, so a 2 m part
silently accepted a boundary 2 mm off its surface while a 20 mm copy
of the same part accepted only 0.02 mm. A STEP file's own declared
uncertainty does not grow with the part, so the bound shouldn't either.
Body gains boundary_tol: Option<f64>, Some(file's declared tolerance)
for a body read from STEP (crate::step_in::Units::tol, already used
by the ring-split fix in split.rs), None for anything this kernel
built. It's set before the import's own unmeshed-face check runs, and
carried over by the two face-split operations that re-cut an imported
surface (splitface.rs, outline.rs), since the file's uncertainty still
describes those boundaries afterward.
plan_face's accept now reads: the file's own tolerance when the body
declares one, or the old chord-tolerance/extent bound otherwise. The
old bound's tol * 10.0 term had to go too, not just the extent term:
at a 2 m part's typical display tolerance that term alone is ~20 mm,
nearly ten times the extent bound jyviko objected to, so keeping it
would have left the exact 2 m/2 mm example still silently accepted.
Two new tests in step_in/tests.rs:
- band_faces_split_when_a_scaled_copy_runs_off_its_surface: the same
band fixture at a realistic 2 m scale with the same absolute slop
and declared uncertainty as the small one, meshes the same way at
every chord tolerance from coarse to fine.
- off_surface_budget_follows_the_file_not_the_part_size: the actual
regression. The same off-surface error is accepted or refused the
same way whether the part is 20 mm or 2 m; a 2 mm error against a
1 µm declared uncertainty is refused at both sizes now (accepted at
2 m under the old bound, refused at 20 mm - that asymmetry was the
bug). Checked at both a coarse and a fine display tolerance.
Known gap, not fixed here: a STEP-imported body saved into a
.solidcraft design and reopened loses boundary_tol (native.rs's
decoder has no field to read it from) and falls back to the old
extent-based bound on reload. Today's design format has no concept of
this value at all; persisting it is a real format change, out of
scope for this fix.
Full kernel suite: 776 tests, 0 failed. clippy -D warnings clean.
* Display plans for STEP threads and pointed ends (#3847)
Three faces cost a threaded or pointed STEP part its whole display plan, so it
was drawn from the reference mesh: cracked, faceted, and never refined up close.
- A loop through a pole (a cone's apex on the boundary) seemed to wind around
the surface: the jump at the apex, unwrapped to the nearest copy, was
arbitrary. The loop is turned to end where it leaves the pole, so the step
that closes it is an ordinary one (`seam::close_through_pole`).
- Projection onto a spline with hundreds of spans (a helical flank) restarted
from a 16 x 16 grid and settled on another turn; it now starts from two
points per span, capped.
- Sag refinement no longer inserts a point exactly on a boundary side, which
split the side and failed the face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* tess: a refused face's edges are divided finer and it is planned again (#2814)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* tess: sliver faces plan empty; a face no method plans is filled flat from its nodes (#2814)
A face whose boundary runs out and back along itself (two edges between the
same vertices, a rounding apart, as STEP files write slivers) encloses nothing
and is planned with no triangles. A face still refused after its edges are
divided finer (a cusp, a sliver whose sides sag across each other, a small cap
at a pole) is filled flat from its shared boundary nodes, so the rest of the
body keeps its display plan instead of falling back to the reference mesh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* display mesh tests: a rim the chord tolerance leaves a line is divided again (#2814)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* portable B-rep: up to 8192 control points along a spline direction (#2814)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* solidcraft-cli: --debug logs what the engine reports to stderr
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* STEP import: a spline written over a tiny parameter range is read over one (#2814)
Some writers parameterize splines over a few millionths (a humanoid robot's
edges span 5.4e-6). The kernel tells parameters apart only to 1e-6, so over
such a range it evaluated the curve's end wrongly, and trimming an edge to its
vertices dropped a control point: the bodies could not be stored exactly and
the whole model cache was left out of the design. The knots are now stretched
to span one; the curve is the same and edges are trimmed by their vertices, so
nothing read from the file refers to the old parameters.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* model cache: a body keeps its file's declared accuracy (#2814)
A body restored from the cache dropped the accuracy the file it was read from
declares, so the planner held its boundaries to the kernel's own bound and a
reopened design drew differently from the import. It is stored with the body's
runtime values, and only when there is one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* tess: a boundary within a hundredth of its body lies on its surface, at every quality (#2814)
#1721 held a body read from a file to the accuracy the file declares. A writer
declares what it aims for, not a bound its edges keep: a 251-body robot
assembly declaring 0.01 µm has boundaries 10 to 30 µm off their surfaces, and
95 of its bodies lost their display plans. The bound is a hundredth of the
body again, what Normal quality always allowed, and now the same at every
quality, so zooming in still never drops a face (#1721's point). A file
declaring more raises it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* STEP import: keep faces whose edge vertices sit slightly off their curves
Some exporters write an edge's vertex beside the end of its curve, further off
than the accuracy the file declares (a surface export declares
0.01 mm and puts a vertex 0.19 mm off two spline ends). The reader refused
such edges and left the face, and with single-face bodies the body, out.
A vertex may now sit up to the file's tolerance or 1/1000 of the model's size
(the diagonal around its VERTEX_POINTs), whichever is larger, never more than
the existing 1 mm ceiling. Spline and open-conic edges have the end control
point moved onto the vertex, so every such edge meets its vertices exactly.
The file's declared accuracy still governs closed-curve, seam and circle
checks.
* tess, io: review clean-ups (#2814)
- A sliver face is one whose loops are all slit: drop_slits finds it in the
retry after a failed plan, so the pre-check on every face (folded) is gone.
- The flat fill uses cdt::triangulate (a lenient fill that leaves out sides
crossing one already kept) and its flood-fill inside test, and the plane
from geom::Plane.
- Refinement only builds its indexes when a face was refused, takes the
faces to plan again from edge_faces, and re-samples edges on the pool;
Rules::finer for the finer rules.
- One PackageWriter::fits for the model cache, the preview and the thumbnail.
- The band split's ring tolerance lives in split.rs; comments say what the
off-surface bound is now.
- The CLI logger prints Level::as_str().
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: David Lackovic <lackovicdavid1234@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Ray <raykholo@users.noreply.github.com>
* Spike: typed parameter contracts and JSON Schemas for solid.box and solid.extrude
The schema RFC's spike (plan/schema-spike.md). solid.box and solid.extrude get
typed contracts with generated JSON Schemas (2020-12), checked in front of the
unchanged handlers by a per-session level: off (the default, which changes
nothing), warn (the call runs and gains param_warnings) or strict (the call is
refused and the design left alone). Also engine.describe and the MCP tool
describe_command, `solidcraft-cli mcp --param-check off|warn|strict`, a
FeatureResult type for feature replies, and an env-var audit recorder
(SOLIDCRAFT_PARAM_AUDIT) used to check the contracts against every test.
Local spike branch; not for upstream as is (see the results report).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameter contracts: put the audit recorder behind a feature; drop two ignored test keys
The audit recorder is now on only in a build with the engine's `param-audit` feature
and `SOLIDCRAFT_PARAM_AUDIT` set. Its code is still compiled, linted and tested without
the feature. `scripts/param_audit.py` summarises a test run's audit logs, and the schema
module's docs give the steps for converting a further command.
Two tests passed keys their command ignores, which the audit found: `position` on
`solid.box` (`hole_face_tests.rs`) and `symmetric` on `solid.extrude` (`face_tests.rs`).
Both are removed, so the tests build what they always did. Comments no longer call
the contracts a spike.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Adjacent \X2\...\X0\ runs, as step_out writes one per character, now
decode: the backslash opening the next run was pushed as a literal, so a
name exported as 圆角 came back as 圆\X2\89D2\X0\ (also every linked
component insert, which round-trips through STEP).
STEP and IGES bytes that are not UTF-8 are decoded in their detected
legacy encoding (chardetng + encoding_rs) instead of from_utf8_lossy, so
GBK or Shift_JIS names from vendor files no longer turn into U+FFFD.
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Model cache written by default: exact bodies, stored once, scaled caps (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* bench-open: say why bodies were not kept
* Exact planes and revolutions; budgets for large bodies (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Native B-rep: rebuild shells as the kernel made them (closed and seam edges) (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: the model cache and the exact native B-rep (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* bench-open: time a save without the cache too
* Model cache entries are Deflate-compressed (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Model cache: one that does not fit the design file is left out, never a failed save (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
FreeCAD .FCStd and Rhino .3dm files open, insert and drop like STEP and IGES:
cadmpeg (Apache-2.0, pinned =0.6.1, native builds only) detects the format,
decodes it under its service resource caps, validates the model and writes it
as STEP AP214, which becomes an Import feature in a new component named after
the file, with the up and names options.
Only the fcstd, rhino and step codecs are compiled in (no default features).
ACIS is left out: cadmpeg's sat codec is a ShapeManager stream decoder.
native_cad.rs is the single importer seam. Self-made FreeCAD and Rhino box
fixtures, hostile-input, ZIP-bomb and cap tests, engine tests for the
component path; the browser build reports these formats as not supported.
A note under design format 23 says an Import's file can name these formats.
Co-authored-by: Jacob Oursland <jacob.oursland@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
glTF files open, insert and drop like 3MF/STL/OBJ: a component named after the file, the node tree as nested rigid components, repeated meshes as occurrences, metres to mm, Y up turned to Z up by default (up: z keeps axes), materials as PBR appearances. Bounded, hostile-input tested reader; no new persisted data. Closes#1505.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat prototype: drive an ACP agent the user already has from a side panel
A desktop-only chat panel (off by default) that starts a coding agent over the
Agent Client Protocol and gives it SolidCraft's MCP server, bridged to the open
window through the token-protected control channel with the default folder
limits. It finds installed agents (Claude Code and Codex adapters, Gemini CLI,
Copilot, Qwen, OpenCode, goose) with version and login state, streams text,
tool calls and plans, shows the agent's permission requests, and when an agent
isn't signed in shows its own login methods without handling any credential.
Design notes and findings: docs/design/in-app-agent-chat.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: say only what the end-to-end run showed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: gate, one undo per message, docking, process groups, discovery polish
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: Settings → AI, several agents with a switcher, OpenAI-compatible endpoints, permission modes, toolbar button
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: translations, tool cards, Add agent dialog fixes, test agent saves on its own
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: third-party licences for the keychain crates; clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: badge text from the theme tokens
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: Auto-allow model edits is the default permission mode
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Adds a bounded normalization path for PNG16 and ICC-bearing JPEG texture inputs, producing float RGBA with recorded color and orientation decisions.
Co-authored-by: 0xlillith <0xlillith@users.noreply.github.com>
The mesher samples edges through a fallible evaluation, so an intersection curve whose projection fails to converge no longer panics; a boolean result with an edge that does not evaluate is refused with an error. Fixes#1252.
* Windows: resize border from the first frame, DPI-correct window moves (#1381)
- The egui resize zones were laid out after the start page's early return, so a launch without
a design had no resize edges at all. They now run on every page.
- Windows: the main window's procedure answers WM_NCHITTEST with the resize edges and corners,
Windows' own border width at the window's DPI (8 px at 100 %), so the OS shows its resize
cursors and runs its own resize (snap included) from the first message; no egui zones there.
- Windows: WM_GETDPISCALEDSIZE returns the size winit then applies (same logical size), so the
rect the OS suggests while the title bar is dragged onto a monitor with another scale is the
rect the window gets.
- Zone sizes and hit test shared in titlebar.rs and unit-tested; Windows CI checks the hit test
right after launch and a real edge drag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Windows resize smoke: find the main window by its title
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Windows resize smoke: probe the maximized window at the screen's edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The three walks over a feature (expressions, references, geometry) are generated from FeatureKind by #[derive(Walk)] in a new proc-macro crate, solidcraft-derive, from #[walk(...)] attributes written next to each field. The hand-written walks in params.rs, feature_refs.rs and feature_geometry.rs are gone; Ruled Surface and Extend have their attributes, and the three golden walk records are unchanged.
Co-authored-by: jijinbei <jijinbei@users.noreply.github.com>
Lands the Render workspace (R3), bounded preview-image jobs with cancellation and atomic PNG export (R4a), and opaque PBR looks as one change.
- Render workspace: an overlay-free product preview on the installed GPU device. Returning to Design restores its camera. render.scene and render.settings.apply are added.
- Image jobs: render.preflight/start/status/cancel/export run bounded CPU preview jobs. Export captures the job, overwrite choice and document, and checks the caller's file scope before writing.
- Opaque PBR: looks can carry metal fraction, roughness and dielectric IOR. The product viewport and preview PNG use them; geometry and mass are unchanged. The v1 catalog export refuses PBR rather than dropping it.
- Render setups and PBR looks are saved under design format 21. Labels are in en/de/ja/ko/zh/ru.
Supersedes #706 and #800. Refs #620, #673, #756, #1004.
Contributed by @0xlillith.
Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
A crash inside a graphics driver left only "an unclean exit between
commands": no backtrace, no module, no hint that it was at startup.
- The crash journal now keeps the startup step the app is in (window,
graphics instance, surface, adapter request, adapter chosen, device
creation, renderer and viewport shader compiles, surface configure,
first frame and its present, running) and the renderer as soon as the
adapter is picked. egui-wgpu tells the app about its steps through a
small hook. An unclean exit before the first frame names the step.
- Windows: an unhandled-exception filter (src/native_crash.rs, the one
Windows-only module allowed unsafe) writes the exception code, the
faulting module and offset, and a minidump next to the journal; the
next start puts them into the report.
- The Windows CI job runs a child that faults on purpose and checks the
report.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
render.settings.set saves validated named render setups (camera, output size, exposure, environment) as one undo step, and render.settings.get reads them back without applying a camera. When validated render settings are the only change, the engine keeps the evaluated model instead of rebuilding it. Setups are saved under design format 21; format-20 designs read as having none. Fixes#658; refs #620.
Contributed by @0xlillith.
Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
Startup no longer stops at a bad settings file or a missing GPU: a settings file that fails to load is set aside, a failed GPU start retries with the software renderer, and a safe mode starts with defaults. Adds a troubleshooting page to the guide.
Where SolidCraft can replace itself safely, the Update window gets Update now:
- AppImage: the new AppImage is downloaded next to the old one, verified and renamed over
it; Restart now starts it as SolidCraft exits.
- Windows MSI: the verified .msi starts (msiexec /i … /passive) once SolidCraft has closed,
after the usual questions about unsaved designs.
- Windows portable zip / standalone exe: the running solidcraft.exe is renamed to .old, the
new one takes its name (solidcraft-cli.exe too), Restart now; .old goes at the next start.
- macOS: the verified .dmg is opened (the app is ad-hoc signed and not notarized, so it isn't
replaced behind the user's back).
- Flatpak, Snap, deb, rpm, tar.gz: never replaced; the window shows the command.
Every package's SHA-256 must match the release's SHA256SUMS.txt (HTTPS, same release); a
mismatch deletes the download and changes nothing. With PUBLIC_KEY set in update/install.rs,
SHA256SUMS.txt.minisig must also verify (minisign-verify, MIT) with a trusted comment naming
the release. release.yml signs the list when the UPDATE_SIGNING_KEY secret exists and fails
when the app expects signatures but the secret is missing; docs/releasing.md has the steps.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* GPU tessellation: a pipeline the device cannot build falls back to CPU meshing instead of crashing (#1098)
Build the tessellation compute pipeline inside error scopes; TessGpu::new returns an error,
and the viewport logs it and meshes bodies on the CPU. A Windows CI job builds the pipeline
with D3D12's FXC on the WARP adapter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tessellation shader: basis functions in one-dimensional local arrays, so D3D12's FXC compiles it (#1098)
FXC has to unroll loops that write an array inside a struct (Basis.n0/n1) or a 2-D array
(ndu) by a counter, and cannot with run-time trip counts (X3511). A2.2 basis functions in a
local 1-D array returned whole; derivatives from the degree p-1 functions; the pole step
offsets computed rather than indexed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
At start, and at most once a day, a background thread asks GitHub for the latest stable
release (one HTTPS GET to releases/latest, nothing else sent; 15 s timeout; silent when
offline; GitHub's rate limit respected). When it is newer than this build, an Update button
appears next to Report a bug. It opens a window with the version, the release notes and
Download (the asset that fits this installation), Skip this version and Remind me later.
- Versions compare as semver; a nightly counts as the release it was built after, so it is
offered only a newer stable release.
- The installation is detected (AppImage, Flatpak, Snap from the store or a file, deb, rpm,
tar.gz, Windows MSI/portable/exe, macOS app); Download picks the fixed-name asset.
Development builds and the Flatpak (no network permission) never check.
- Preferences > General > Updates: Check for updates automatically (on) and Check now.
- HTTP via ureq + rustls with the operating system's certificates (desktop app only).
- docs: Updates and privacy page.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
macOS hands files opened from Finder, the Dock or open -a to the application delegate's application:openURLs:, which winit's delegate lacks, so AppKit showed "SolidCraft cannot open files in the SolidCraft design format". open_documents adds that method to the delegate's class before launch finishes and queues the paths for the UI, which opens them like files named on the command line.
This is the one place SolidCraft's own code uses unsafe: the app crate denies unsafe_code instead of forbidding it, and only the two macOS-only functions in open_documents.rs allow it, with the reason documented there and in AGENTS.md. Adapted from VectorCraft (see ATTRIBUTION.md).
Closes#997.