Commit Graph
424 Commits
Author SHA1 Message Date
froglemonade2andClaude Opus 5.5 0476154973 Update Links: linked designs that changed while the tab was away come back as one undo step (#9743) (#9753)
* claim: #9743

* Update Links: linked designs that changed while the tab was away come back as one undo step (#9743)

Coming back to an assembly's tab read each changed link in an Update Links
run of its own, so each became its own undo step: one Undo took back one
component and left another copy of the same part at the new version.

component.update_links now takes `components`, a list, and goes on past a
design it cannot read: that link keeps its bodies, is named in `failed` and
gets a warning. The tab return sends one request with every changed link,
records as read only the ones that were, and says on the status line which
one could not be read.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 16:04:05 +00:00
HiroKenEzandClaude Opus 5.5 8f259d5b83 Sketch: the Line tool can switch to a tangent arc and back without changing tool (#9489) (#9553)
* claim: #9489

* Sketch: the Line tool can switch to a tangent arc and back without changing tool (#9489)

With Preferences > Sketch > "Rest on a line's last point to switch to a
tangent arc" on (off by default), leaving the chain's last point and resting
back on it for 0.35 s makes the next click a tangent arc, by the existing
sketch.arc.tangent command, and the same gesture goes back to lines. A label
at the cursor says which. sketch.arc.tangent's end can now name an existing
point, so an outline drawn this way closes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: the cursor label names the command in words (#9489)

The label asked the catalog for a message id that doesn't exist, so it showed
the id. It now takes the command's translated label, and the test checks the
words it paints. Moved clear of the pointer's own badge.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 11:21:59 +00:00
HiroKenEzandClaude Opus 5.5 5bb3b6717f Equation curves: the variable can carry its range's unit (#9333) (#9549)
* claim: #9333

* Equation curves: the variable can carry its range's unit (#9333)

A curve can set variable_unit "range" (or tick the new box in its window): the
variable is then a length, so a ^ 2 / (4 * t) is a length when a is one. Start
and end must both be lengths, or one a length and the other a plain number in
the design's unit; anything else is refused. Saved only when set, as one pending
format change; without it curves behave as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 10:54:06 +00:00
austin62jakeandClaude Opus 5.5 3c0d4e120e Linked designs: one changed while the assembly was closed is read again when it opens (#9739) (#9872)
* Claim #9739

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Linked designs: one changed while the assembly was closed is read when it opens (#9739)

A link now keeps the SHA-256 of its design file's bytes as the assembly
last read them (DesignLink::file_sha256, a pending format change), set by
Insert Design, Relink, Extract to File and Update Links. component.links
reports `changed` from it, hashing a file again only when its time or
size changed (vfs::design_path_stamp, behind the design-path rule). The
app treats a link it meets for the first time whose file changed as not
read yet, so opening an assembly, in its own tab or in place of the blank
design, reads those parts again as a tab coming back does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Linked designs: read what changed last when a design opens in place of the blank one (#9739)

A read is taken up only by the design revision it started from, and
adopt bumped the revision after starting it, so the read was dropped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-31 07:28:24 +00:00
momysnowandClaude da23eb1377 Sketch dialog follows "Dialog buttons at top" (#9860) (#9884)
* claim: #9860

Co-Authored-By: Claude <noreply@anthropic.com>

* Sketch panel follows Dialog buttons at top (#9860)

The Sketch panel drew Finish Sketch, Look at and Slice in a footer under
its options even with Preferences > Interface > Dialog buttons set to
Top. Panel::palette now reads the same published preference as the
feature cards and draws its footer row under the header, above the
options, when it is Top. With the preference off nothing changes.

Changes a default: no

Co-Authored-By: Claude <noreply@anthropic.com>

* Docs: Dialog buttons at top also moves the Sketch panel's Finish row (#9860)

Co-Authored-By: Claude <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-31 06:23:41 +00:00
PeppaWutz 9d8ab72da7 Ribbon tooltips: help for every remaining toolbar command (#9060) (#9868)
The last 106 commands on the backlog get the two-sentence help under
their tooltip, in English, German, Japanese, Chinese, Arabic, Hebrew and
Vietnamese: Surface, Sheet Metal, Plastic, Inspect, Construct,
Configure, Parameters, Library, View and the few single ones (Bill of
Materials, Frame Member, Pattern on Path, Convert Mesh, checkpoints).

With that the backlog is empty, so it goes: the test is now
every_toolbar_command_has_help, and the docs that mentioned the backlog
say so. The help tests use sketch.drag, which is not on the ribbon, as
the command without help.
2026-10-31 05:04:31 +00:00
Nathan Dane 160662ffec Tab colours: per-tab surfaces and fade (#8876) (#9808)
* claim: #8876

* Resolve theme tab surfaces with cached Oklab transitions

* Apply tab surfaces to unauthored Render preview backgrounds

* Allow quantized endpoint colours late in cubic Render fades

* Keep tab surface publication from restyling ordinary widgets
2026-10-31 04:39:12 +00:00
snowsh1neandClaude Opus 5.5 2f6ca7e46b Linux: optional system title bar (server-side decorations) (#9263)
On Linux the window always had no OS decorations and drew Windows-style
caption buttons in the application bar. SOLIDCRAFT_TITLEBAR=system, or
"titlebar": "system" in graphics.json, now opens the window with the
desktop's own title bar and buttons (server-side decorations where the
compositor offers them). The default is unchanged; Windows and macOS
are unaffected.


Claude-Session: https://claude.ai/code/session_01Gnm1n2PVPqghMuR9kHWXfh

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 04:12:39 +00:00
Nathan Dane d7cba9e96d Preferences: theme options list and the opacity option (#8876) (#9807)
* claim: #8876

* claim: #8876

* Theme options: persist per-theme values and expose preferences contracts

* Restore selected theme mode after stopping a followed theme

* claim: #8876

* Preferences: render theme options and apply readable panel opacity

* Use floating-point scale expectation in theme preferences scenario

* Keep panel opacity colour construction inside theme tokens

* Complete theme options translations in Arabic Hebrew and Vietnamese

* Let standalone theme sliders fill their option cells
2026-10-31 04:01:29 +00:00
3b77567932 Docs: joint flip needs x for point origins; checkpoints are single use, 16 kept (#9746) (#9844)
joint.create's flip text and the assemblies guide said two origins at one
point with the same z stay as they are; a point origin without x takes its
x from z, so a part turned about z turns back. Say so, and point to giving
x on both origins or joint.as_built.

edit.checkpoint and edit.restore_checkpoint now say that restoring or
forgetting uses the checkpoint (and later ones) up and that only the last
16 are kept, and the "no checkpoint N" error says why. The editing and
mechanisms skills no longer read as if a checkpoint can be restored twice.

Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 03:48:13 +00:00
Nathan Dane ca005237a1 Theme files: options, overlays and requires (#8876) (#9805)
* claim: #8876

* Theme files: add options, overlays and requirements
2026-10-31 02:25:34 +00:00
PaddleStrokeandClaude Opus 5.5 3877ef08b9 Measure: drag the labels away from the part (#8510) (#9395)
* claim: #8510

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Measure: drag the labels away from the part (#8510)

The distance and X/Y/Z labels in the view follow a drag of the pointer and keep
a leader to what they measure; a double-click or a new measurement puts them
back. A press on a label picks nothing, starts no box selection and opens no
Select Other.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 02:00:23 +00:00
PaddleStrokeandClaude Opus 5.5 cce337f83f Sketch: alignment guides from any hovered point while drawing (#9105) (#9673)
* claim: #9105

* Sketch: alignment guides from any hovered point while drawing (#9105)

While a drawing tool waits for a point, hovering a line or arc end, a
rectangle corner or a free point wakes the same temporary horizontal/
vertical tracking guide as a circle centre or line midpoint. Idle
hovering keeps centres and midpoints only. Preference
sketch_tracking_points (on) turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 02:00:07 +00:00
Colin Faulkingham 8311ae5c5d BOM: group purchased children under inseparable parts (#9744) (#9794)
* claim: #9744

* Fix grouped BOM children for inseparable parts
2026-10-31 01:17:58 +00:00
ffbaf292f0 Browser: drag over the eyes to show or hide many rows at once (#9680) (#9681)
* claim: #9680

Co-Authored-By: Claude <noreply@anthropic.com>

* Browser: drag over the eyes to show or hide many rows at once (#9680)

Press an eye and drag up or down over other eyes: each eye the pointer passes
takes the first eye's new state (shown or hidden), and the whole drag is one
undo step. A plain click is unchanged. Dragging near the list's top or bottom
edge scrolls it. A component's eye now goes through browser.visibility, so it
is undoable like a body's.

Co-Authored-By: Claude <noreply@anthropic.com>

* Browser: fix the eye drag's undo merge and layering (#9680)

Merge the drag's steps from the undo depth noted at press, when the design
and visibility still match, instead of searching the history. Run the merge
every frame from logic(), so a release under an overlay is never missed. An
eye under a popup or tooltip no longer takes part in the drag. Adds a
regression test for a drag from the Origin's eye after a show.

Co-Authored-By: Claude <noreply@anthropic.com>

* Browser: say when the eye drag's undo merge gives up (#9680)

Co-Authored-By: Claude <noreply@anthropic.com>

* Gallery test: the eye-drag state key is not a renderable element

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
2026-10-31 00:35:34 +00:00
fkirillandKirill Frolov 1b927421f6 Restore Browser and source-body context during Extrude editing (#5573) (#5576)
* claim: #5573

* Keep Browser and source bodies in the Extrude edit context (#5573)

* fix: keep Browser feature rows after manual rollback

---------

Co-authored-by: Kirill Frolov <k.a.frolov@vk.team>
2026-10-30 22:03:03 +00:00
froglemonade2andClaude Opus 5.5 fc499441e2 Lost GPU: the old process exits instead of hanging in the driver, after the settings are saved (#9044) (#9054)
After a lost device the next start began from on_exit, while eframe was
still writing app.ron, and the old process then hung in
vkDestroySwapchainKHR on NVIDIA. Start it from Drop for App instead, after
eframe has joined the settings save and before it drops the window's GPU
surface, and end the process there after a loss. The update restart moves
there too. The loss reason is passed to the next start and shown in its
note.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 17:26:33 +00:00
GavinSchmidtandClaude Opus 5.5 0952686c1b Sheet metal: personal Sheet Metal Rules, saved in the profile and offered by every design's rule manager (#9346) (#9520)
* Sheet metal: personal rules library in the profile, offered by every design's rule manager

Adds personal_sheet_rules.rs and its tests, the personal_sheet_rules preference, and the rule manager wiring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UqPNsVN9JQhyMReCXXsRSu

* Sheet metal: pending strings for personal rules

English and the complete catalogs (ar, he, ja, vi, zh), plus de and ko.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UqPNsVN9JQhyMReCXXsRSu

* Docs: personal rules in the sheet metal guide

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UqPNsVN9JQhyMReCXXsRSu

* Docs: glossary entry for personal sheet metal rule

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UqPNsVN9JQhyMReCXXsRSu

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 17:12:12 +00:00
Kai Evans f1c2f67d63 Quick measurement: the selection's length, area or distance in the view's corner (#7000) (#7513)
* Quick measurement: the selection's length, area or distance in the view's corner (#7000)

With edges, faces, sketch curves or points selected, the view's bottom right corner above History
shows what they measure, as the Measure tool lists it: an edge's length (Ø and R for a round
one), a face's area, a point's position; two items' distance and angle; several edges' or faces'
count and total. It is computed off the window thread from a copy of the session whenever the
selection or the design changes, and a click copies it. Preferences > Interface turns it off. The
Measure dialog's rows come from the same function.

* Quick measurement: off by default, turned on under Preferences > Interface (#7000)

The quick_measure preference now defaults to false, so nothing changes until it is turned on.
Its tests turn it on, and a new test checks that nothing shows until it is.
2026-10-30 15:46:01 +00:00
DuBearteandClaude Opus 5.5 5439bfc0b5 Expressions: a decimal comma inside plain parentheses (#9408) (#9447)
A comma separates arguments only directly in a function call, so plain
parentheses take a decimal comma like the rest of an expression:
`-(width-0,5)/2`. The UI no longer rewrites commas before wrapping a value
in the design unit's parentheses.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:34:56 +00:00
SvenCarstensen aff8106205 Help: check for updates and show results in the selected language (#8896)
* Help: add manual update checks and status window

* Test manual update checks and localized results

* Add update check to the native Help menu

* Localize Help update checks in all app languages

* Document manual update checks from Help

* Document ui.help updates control action
2026-10-30 13:41:00 +00:00
fkirillandKirill Frolov 12636b67be Select hidden geometry with Select Other and fit the list to the window (#5574) (#5577)
* claim: #5574

* Pick hidden geometry near long clicks in a five-row list (#5574)

* fix: make Select Other configurable and fit its list to the window

---------

Co-authored-by: Kirill Frolov <k.a.frolov@vk.team>
2026-10-30 13:25:56 +00:00
PaddleStrokeandClaude Opus 5.5 6e39efd4ac Theme: System follows the desktop's dark/light setting on Linux GNOME (#7944) (#8123)
* claim: #7944

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Theme: System follows the desktop's dark/light setting on Linux (#7944)

On GNOME (Wayland, or X11 through XWayland) the window toolkit never reports
the desktop's dark or light preference, nor its changes, so Theme: System kept
its colours. The Linux app now reads org.freedesktop.appearance color-scheme
through the XDG Desktop Portal's Settings interface (then GNOME's color-scheme
and gtk-theme when it has no preference) on a thread of its own, follows the
portal's SettingChanged signal, and falls back to gsettings or a slow poll.
The window reads the answer through Services::desktop_dark; the decision from
the raw values is prefs::desktop_prefers_dark. Windows and macOS keep the
window toolkit's theme.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:25:23 +00:00
C.VengelsandClaude Opus 5.5 3c40edd12a Print face: Send to Slicer lays a body on its marked face (#8429) (#8433)
* claim: #8429

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: Send to Slicer lays a body on its marked face (#8429)

A body can have one flat print face (Document::print_faces, held by the
certified target a sketch on a face holds). body.print_face {body, point?}
marks or clears it. Send to Slicer, Save Mesh with a slicer and EasyPrint
turn and move the exported copy so the face lies on the bed at Z = 0 with
the centre of mass over the origin; a face that can't be found is a
warning and that body is exported as it lies. Move/Copy and Mirror give a
copy its source's print face. One pending format file; the command
has its own icon (print_face).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: Ctrl+B, the face menu and the Send to Slicer row (#8429)

Ctrl+B and the face context menu mark the selected flat face as its
body's print face, or clear it. Send to Slicer shows the print face of
the one body being sent in a Print face input, takes a flat face picked
in the viewport and clears it when emptied.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: a light tint in the viewport and its strength in Preferences (#8429)

Each visible body's print face is tinted towards the theme's section
colour and outlined, at the strength set under Preferences > General >
Slicer (print_face_highlight, 0 to 1, 20 % by default; 0 hides it). The
user guide describes the print face, and the known limitation after a
shell of a shelled body is listed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:25:18 +00:00
Kai Evans 1754318df7 Browser: the visibility eye at the right end of each row (#8718) (#8720)
* claim: #8718

* Browser: the eye sits in a column at each row's right end (#8718)

Tree rows draw the visibility eye right-aligned at the row's end, clear of
the fold arrow and the radio and of a floating scroll bar; names stop short
of it. Preferences > Interface > Eye next to the fold arrow
(browser_eye_left) keeps the old position. Rows report their control
positions so placement handles and inline rename follow the layout.

* Docs: the browser's eye column and browser_eye_left (#8718)

* Browser: the eye's tip shows by the eye at the row's end (#8718)

* Browser: a gap keeps the fold arrow and the radio apart; the eye clears a floating scroll bar (#8718)

The eye's old slot leaves a 10 pt gap instead of 4 pt, so the radio's hit
area is 7.5 pt from the fold arrow's and History pattern rows step in from
their sketch as far as browser children do. The eye's inset follows the
scroll style: only a floating bar laid over the rows takes room. Rows
publish indent:<label> where their depth puts them.

* Tests: browser depth checks run on the default layout, by indent handles (#8718)
2026-10-30 13:24:22 +00:00
FrankandClaude Opus 5.5 f59f6698f1 Ribbon drop-downs as a grid of large icons, as an option (#4739) (#5012)
* Ribbon drop-downs as a grid of large icons, as an option (#4739)

Preferences > Interface gets two settings, both off by default:

- Menus: List | Large icons. With Large icons a panel's drop-down shows its
  commands as rows of up to five icons at 32 px (twice the list's), keeping
  the list's group headings and order. The name, shortcut and help are in
  the tooltip, as on a ribbon button. Arrow keys move across and between
  rows; a click starts the command; right-click and drag pin it as before.
  Resting on an icon for two seconds arms a pin in its corner; a quicker
  click anywhere starts the command, so nothing is pinned by accident. A
  pinned command shows its pin.
- "Leave pinned commands out of the drop-down menus": a drop-down (list or
  grid) leaves out the commands the ribbon shows as buttons; a panel too
  narrow for its buttons lists them again, and a menu is never left empty.

No icon artwork or colours change. Sketch > Create keeps its family list.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch > Create in the large-icon grid: every variant under its family (#4739)

With Menus: Large icons, Sketch > Create showed its family sub-menus as
plain text rows (Line, Rectangle, Circle, ...), unlike every other menu. It
now shows every variant as a large icon under its family's heading, then the
other tools under "More". The list keeps its family sub-menus.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: groups side by side, no footer (#4739)

A menu of two or more headed groups (Sketch > Create's families, Model >
Modify's Edges, Faces, Bodies, Specialise) puts the groups side by side, each
heading over a column of its icons, at most two across. Menus without groups,
or one too wide for the window, keep rows of up to five. The pinning note
under the large-icon menus goes: the tooltips and right-click menus say it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: a separator line between groups side by side (#4739)

As between the ribbon's sections: a 1 px line in the theme's border colour.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: at most three rows, growing to the right (#4739)

A menu fills five columns, more when that would take over three rows (Model >
Create: 7 x 3); in grouped menus a group too big for three rows gets more
columns. Only a window too narrow for that wraps into more rows. A test checks
every panel's menu of every tab.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: group headings centred over their icons (#4739)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drop-down group headings: smaller than the drop-down's header, not in capitals (#4739)

Edges, Faces, Bodies (and Sketch > Create's families) were drawn in capitals
at font_small, which reads larger than the drop-down's own header
(font_caption). They now use font_micro, written as named, in the list and the
large-icon grid. Review feedback on #5012.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: start a command from the grid at its icon, as main's rows do (#4739)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Ribbon icon grid strings: a pending locale file, with ar, he and vi (#4739)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: commands in no group stand apart, so a left-out group doesn't move them (#4739)

With Convert to Sheet Metal pinned and left out of Model > Modify, its
Specialise group went and Delete, in no group, moved under Bodies.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:59:08 +00:00
Rick MorgansandClaude Opus 5.5 bd1525dcfb Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332) (#9334)
* claim: #9332

* Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332)

`sinh`, `cosh`, `tanh` and `asinh` take a unit-less number and give one,
as `exp` does; `acosh` refuses x < 1 and `atanh` refuses |x| >= 1, worded
as `asin` and `ln` refuse what lies outside their domain. They are in the
expression help (`FUNCTIONS`, the parameter autocomplete), the
hostile-expression fuzz tokens, the parameters and equation-curve guides,
and the checking skill's list of functions. Horn flares (Salmon's hypex
`cosh h + T sinh h`), catenaries and the tractrix can now be written as
they are stated instead of expanded into `exp`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:13:59 +00:00
Ahmad Khan 71bb4f7c98 Docs: a beginner's page for equation curves, with pictures and examples (#9282)
A new user guide page, Equation curves, under Sketching: the first curve step by step, Explicit and
Parametric explained with tables of rules to type (a line, a parabola, a wave, a circle, a spiral),
radians, parameters with the involute of a base circle, building a part (a closed flower curve
extruded), editing, and common mistakes. The technical details stay in a short section for scripts
and agents.

Seven pictures, rendered by `cargo xtask book` from new scripts in docs/book/scripts/equation-*.json
(gitignored output, attributed in attribution/pending/docs-equation-curves.md). The Sketching page
keeps a short summary and links to the new page.
2026-10-30 07:54:27 +00:00
Matthew KnutsonandClaude Opus 5.5 991082fbaf Typed contracts for the construction axes, points and planes (#2829) (#7750)
* claim: #2829 (construct.* contracts)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Typed contracts for the construction axes, points and planes

The 19 construct.* commands get input contracts and FeatureResult as
their output, with shared types for references, planes, a plane or
face base, an axis line and a construction plane's name, each calling
the reader its handler uses (split out of geo, plane_param, the face
capture and named_axis_line).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 06:03:04 +00:00
AsTechEvolvesandClaude Opus 5.5 94b399e98f Preference: keep the view when a sketch opens; Look At faces it on request (#9188) (#9190)
* claim: #9188

* Preference: keep the view when a sketch opens, Look At faces it on request (#9188)

Preferences > Sketch > "Turn to face a sketch when it opens" (on by default,
so nothing changes unless it is turned off). Off: creating or editing a
sketch leaves the view as it is, a sketch started on a face no longer
re-centres on the picked point, and Look At (the palette button, Ctrl+8)
still turns to face the sketch. The control channel sets it as
`ui.prefs {"sketch_open_look_at": false}`.

Changes a default: no

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 05:32:56 +00:00
railconstrandrailconstr 81cbcef31c Sketch: add construction-line toolkit (#8239) (#8679)
Co-authored-by: railconstr <335242259+railconstr@users.noreply.github.com>
2026-10-30 05:02:54 +00:00
semmelrindeandClaude Opus 5.5 f3ee34d372 English: American spelling throughout the base catalog, British only in English (UK), and "1 body" (#9085) (#9194)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 04:16:23 +00:00
313d2bdb41 Sketch: snap where two recent centre and midpoint guides meet (#8694) (#8744)
* Sketch: snap where two recent centre and midpoint guides meet (#8694)

The alignment guide remembered one reference and did not move the cursor. Keep the previous centre or midpoint as well, and snap a drawing point to where their guides cross.

* Sketch: keep the recent-guide crossing snap off until asked (#8694)

The crossing snap was on whenever alignment guides were. Give it its own Sketch preference, off by default, so the guides stay visual until someone turns the snap on.

* Sketch recent snap: ar/he/vi strings and clippy borrow fixes

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 00:40:05 +00:00
Rick MorgansandClaude Opus 5.5 2356a63aea CLI: run takes --param-check (#6921) (#6924)
* claim: #6921

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CLI: run refuses unknown options and takes --param-check (#6921)

`solidcraft-cli run` now checks its options through `known_args`, so a
mistyped option fails instead of being ignored, and takes
`--param-check off|warn|strict` with the MCP server's words and default
`off`. `warn` prints each unknown key with a suggestion on stderr and
runs the step; `strict` stops at that step and writes nothing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CLI: run's option check takes --param-check; warn on timed runs as steps complete

`run` keeps #6919's (#6918) unknown-option check, with `--param-check`
among the options that take a value. `Session::run_script_timed` now
takes the same per-step callback as `run_script_each`, so `run --timings`
or `--profile` at the warn level reports a step's warnings even when a
later step fails, instead of after the script (and not at all on a
failure).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:40:30 +00:00
cb34eef6aa Settings profiles: save, switch, export and import input and interface settings (#6237) (#6254)
* claim: #6237

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: save, switch, export and import input and interface settings (#6237)

A profile keeps the Interface, Navigation and Sketch preferences (mouse mode,
radial menu and gestures with every studio's lists, theme, scale, font, ...),
the language, the keyboard shortcuts, the toolbar, the S box favourites and
the imported theme it uses under a name. Machine-specific settings stay out
(3D mouse, graphics, units, AI, recent files).

- Preferences > General > Settings profiles: choose the active profile to
  apply it, Save, Rename, Delete, Export... and Import...; a note shows when
  the settings differ from the saved profile; Cancel takes a switch back.
- settings.profile.{list,save,apply,rename,delete,export,import} commands for
  the control channel, palette and scripts; the engine checks the parameters,
  the app does the rest.
- One `solidcraft-profile/1` file; import checks the format and name, drops
  unknown keys and unreadable values, caps sizes, never switches, and never
  panics. Each preference is applied through prefs::set, so a value this
  computer refuses keeps its current one and is reported.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Glossary: settings profile, and "profile" among the words with more than one meaning (#6237)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: new strings in a pending locale file, not the catalogs (#6237)

New UI strings now go to assets/locales/pending/ (CONTRIBUTING.md), so
this pull request no longer edits the shared catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preferences snapshot: compare the toolbar, favourites and profile too

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: keep a command's several keys (#6237)

Since a command can have several keys (#6288), the keymap saves a list where it has more than
one. A profile's checks only took a single key, so saving or importing a profile dropped such a
command's shortcuts. They now read the keys as the keymap does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: Arabic, Hebrew and Vietnamese strings (complete catalogs) (#6237)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tripper <tripper@localhost>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 18:42:36 +00:00
CamWightandClaude Opus 5.5 a985b8ee17 Preferences: Perspective view's field of view, a slider or a typed value (#5364) (#5373)
Preferences > Graphics > Viewport gets a Field of view row under Perspective view: the UI kit's
slider in degrees, 15 to 90, dragged or typed and kept to whole degrees, enabled only while
Perspective view is on. The preference is perspective_fov, in radians (default 0.6, about 34°,
so the default view draws exactly as before), and Restore Defaults puts it back.

One place decides the angle the view is drawn with: SolveApp::view_fov(), the preference with
Perspective view on and 0 with it off or while a sketch is open. A saved value outside 15°-90°
reads as the default. projection and fit_bounds read it (fit_bounds' second hard-coded copy of
the 0.6, tan(0.3), now goes through Camera::half_height), and so does the headless fit.
perspective_view() stays, as view_fov() > 0, so #4291 needs no change.

When the angle changes from one perspective angle to another, the camera's distance scales by
tan(old/2) / tan(new/2), with a running view animation's ends, so the target keeps its size and
the slider changes the depth, not the zoom. prefs::follow_view_fov does it once per frame and
after ui.prefs, Cancel and Restore Defaults; a parallel view keeps the last perspective angle,
and while Render is open the camera is Render's own, so the change waits for the design view.

The Render workspace's Perspective check box turns perspective on at the preference's angle,
not π/4; a saved render setup keeps its own. ui.prefs takes perspective_fov and refuses values
outside the range; ui.camera reports the angle the window draws with, and checks a replayed
camera against it, so its reply still replays. Field of view is in en, ar, de, he, ja, ko, vi and zh;
the ui.prefs settings list in docs/control-protocol.md and the guide's tour describe it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:23:49 +00:00
HiroKenEzandClaude Opus 5.5 c857f2fe70 parameters.add: a parameter with no unit takes the design's units (#8865) (#8880)
* claim: #8865

* parameters.add: a parameter with no unit takes the design's units (#8865)

A new parameter given no unit took "mm" for any length or bare number, so
in an inch design `parameters.add {name: v, expression: "40/2"}` made a
20 mm parameter where the Parameters dialog makes 20 in. The unit a new
parameter infers is now a length in the design's units (mm designs are
unchanged); parameters.change on a new name and parameters.import share
the same inference. Angles and unit-less values keep their units.

A definition typed into a value of no fixed kind (a coupling's pitch,
a joint's value) still reads its bare number as millimetres, as that
field does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:18:04 +00:00
Ahmad Khan a7048f41ab Sketch: equation-driven curve, a curve from x(t) and y(t) formulas (#8352) (#8353)
* claim: #8352

* Sketch: equation-driven curve, a fit point spline from x(t) and y(t) formulas (#8352)

sketch.equation_curve draws a curve from formulas in the expression
language and the design's parameters: x(t) and y(t) over a range of t, or
y = f(x) over a range of x. The curve is a cubic fit spline through fixed
points sampled from the formulas, as many as keep it within a tolerance
(0.01 mm by default, at most 500 points); a curve that ends where it starts
closes smoothly. The sketch keeps the formulas (one new design-format
file), places the points again before every solve so they follow the
parameters, and sketch.equation_curve.edit changes them, keeping the joined
end points. Both commands have input and output schemas.

* Sketch: Equation Curve window, its Edit menu item, labels and guide (#8352)

The ribbon's Equation Curve opens a window for the form (parametric or
explicit), the formulas, the range and the tolerance; OK runs
sketch.equation_curve. Right-clicking an equation curve offers Edit
Equation Curve, which reopens the window on its formulas and runs
sketch.equation_curve.edit. New labels and help in a pending locale file
(with ar, de, he, ja, ko, vi and zh), the icon, the glossary term and the
sketching guide.

* Equation curve: one if for closing the sampled points (clippy collapsible_if)
2026-10-29 17:42:59 +00:00
RyanandClaude Opus 5.5 791abbd9b1 Sketch: hold horizontal/vertical and line up with other points at once while drawing (#7828) (#8474)
* claim: #7828

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: hold horizontal/vertical and line up with other points at once while drawing (#7828)

While drawing, the pointer lines up horizontally with the nearest sketch
point level with it and vertically with the nearest one plumb with it, at
the same time, as a dragged point already does; holding H/V with the
previous point still lines up across with another point. Dotted guides run
from the points lined up with (H, V or H+V), and the click adds a
Horizontal or Vertical constraint with each, in the shape's undo step,
unless the sketch already has it.

A click takes the tool out of the app while it runs, so refine_snap
treated every tool as the Line tool then: a rectangle's click could take a
line-extension inference its hover never showed. The tool's points and
kind are kept from the last hover, as the previous point was.

Preferences > Sketch > "Line up with other sketch points while drawing"
(sketch_align_points) turns it off for the old behaviour.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: lining up with other points is off unless turned on

Review on #8474: sketch_align_points defaults to off, so nothing changes for anyone who
doesn't turn it on. With it off, a click also treats the tool as before (the Line tool's
inferences), instead of keeping the tool's kind from the hover.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:11:42 +00:00
RyanandClaude Opus 5.5 d05a114241 Insert Design: pick one of the other open designs, or browse for a file (#8570) (#8571)
* claim: #8570

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Insert Design: pick one of the other open designs, or browse for a file (#8570)

With other designs open in tabs, Insert Design first lists them under the
button: one click inserts a saved one as a linked component; one with
unsaved changes inserts its saved file and the status line says so; one
never saved is greyed out, as there is no file to link. Browse... opens
the file picker, as the button did before, and it still goes straight
there with no other design open.

Preferences > Design > Linked designs > "Insert Design lists the designs
open in other tabs first" (insert_lists_open_designs) turns the list off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Insert Design list: sit with the other menus' items, so run_item keeps its doc comment

Review on #8571: insert_design_items had landed between run_item and its comment. The
rebased menu-walk list keeps main's Target::HistoryControls beside Target::InsertDesign.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:11:25 +00:00
Lars Jansen a4274f9b59 Line tool: press and drag draws one line (#7247) (#7252)
* claim: #7247

* feat(sketch): press and drag in the Line tool draws one line (#7247)
2026-10-29 16:34:30 +00:00
raykholo 3cdfec798f Timeline: joints in feature folders (#8306) (#8316)
* claim: #8306

* Timeline: joints in feature folders (#8306)

timeline.group and timeline.move_to_group take joints as well as features, so
hundreds of joints fold into one folder tile. A closed folder shows one tile
whatever it holds; opening it shows its features and joints in both the bottom
and left History. Suppress, delete and ungroup on a folder reach its joints too
(one undo step), deleting a joint removes it from its folder, and an unknown
joint id or name is an error. Saved with the design; designs without joint
folders read and write as before.
2026-10-29 15:59:18 +00:00
raykholo dcae86e456 Trackpad: zoom with two-finger scroll while holding a key you choose (#8322) (#8584)
* Trackpad: zoom with two-finger scroll while holding a key, chosen in Preferences (#8322)

Holding the zoom key turns a vertical two-finger scroll (or a wheel) into zoom at
the pointer, with the wheel zoom's speed, direction and anchor, so a laptop user
zooms without pinching. Preferences > Navigation > "Zoom with two-finger scroll
while holding": Cmd on macOS and Ctrl elsewhere (default), Option/Alt, Ctrl, or
Off. That key with the scroll did nothing before, so no default changes; Off
keeps it that way. Shift keeps its orbit.

* Trackpad zoom modifier: off by default (#8322)

Scroll keeps its usual meaning until a key is chosen in Navigation.

* Trackpad zoom modifier tests: Off is the default; tests that zoom choose Cmd (#8322)

* Trackpad zoom modifier: zoom once alongside the Ctrl+wheel pinch from #8539 (#8322)

A wheel the chosen key claims is no longer also read as a pinch, and a key that is not
chosen keeps main's pinch handling unchanged.
2026-10-29 14:49:19 +00:00
cronos 28e26209f3 Assembly Move: drag allowed joint freedoms (#6679) (#6904)
* feat: add joint-aware assembly Move handles and live motion readouts

* test: improve render job failure diagnostics

* fix: preserve assembly Move compatibility and viewport theme colors

* ci: skip default label sync for fork PRs

* fix: keep Windows CI checks portable after main rebase

* test: cover RTL assembly strings and stable refraction job

* i18n: cover assembly Move in Vietnamese

* i18n: cover assembly Move in French

* fix: complete CGA palette for assembly motion handles

* fix: complete Assembly Move palettes and Turkish strings

* fix: retain assembly move cache answers and toolbar help

* style: format merged assembly Move navigation guard

* fix: align Assembly Move preferences and tests with main

* Fix offline update fixture synchronization and clipped prism intersections

Wait for all v5 manifest requests before deploying v6. Intersect hole-free prism sections over their common height, retaining the established B-rep path for newly clipped perforated sections. Preserve the failing property seed and add closed-form and cap-boundary regressions.
2026-10-29 13:57:31 +00:00
RyanandClaude Opus 5.5 5e0e168ae9 Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095) (#8103)
* claim: #8095

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095)

component.properties and occurrence.properties report each closed body's
inertia tensor about its centre of mass, and in total the tensor about the
total centre of mass (world axes, g·mm²), its principal moments and axes,
the first moments, and with `about: [x, y, z]` the tensor about any point.
The tensor comes from each body's welded export mesh, tessellated once per
body, scaled to the measured mass and turned by each placement; bodies add
by parallel axes. The maths is a new crates/geom inertia module.

The Properties window shows the first moments, the tensor, the principal
moments and axes, and the view marks the centre of mass with the principal
axes while it is open. Inspect → Measure → Properties now opens that window
(it ran the command and showed nothing).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: Copy matrix, and the whole design's card titled just Properties (#8095)

Copy matrix, under the tensor, puts it on the clipboard as three lines of
tab-separated values at full precision, in the units shown. The card for
the whole design is titled Properties; one opened on a component,
placement or bodies keeps its name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: measure beside the window, so a large assembly doesn't freeze it (#8095)

Properties ran on the window thread: 18 s on a 144-body design, with the
window answering nothing meanwhile (#5203). In the desktop app the card now
measures on a copy of the session on a worker, the way #4614 made agents'
measures work, says "Measuring…" until the reply is in, and Close drops it.
A quick measure still shows at once; headless, tests and the web measure in
place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 13:47:44 +00:00
bherbruckandClaude Opus 5.5 be8bd43a18 CI: wasm compile in the merge queue, dependency advisories on dependency changes (#8652)
The wasm compile ran only by hand, so #8227 (a native-only DroppedFile::bytes() call in
crates/ui-egui) passed PR CI and the merge queue and broke the web build on main (#8534).
A merge group that touches the crates below the apps, the web app, the vendored crates, the
manifests, the toolchain or this workflow now runs `cargo xtask wasm`, and `ci` requires it.

Dependency advisories ran only nightly. A pull request or merge group that changes Cargo.lock
or a Cargo.toml now runs `cargo deny --locked check --warn unmaintained advisories`, and `ci`
requires it then. The nightly keeps the full advisories, bans and sources scan.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 13:39:48 +00:00
Karl Von Richter b2d727f4b2 Toolbar: choose visible tabs while preserving all defaults (#5717) (#8594)
* claim: #5717

* ui(feat): let users choose visible toolbar tabs

Keep Sheet Metal and Weldments visible by default while adding persisted tab visibility controls and restoring specialty tabs for designs that use them.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* ui(fix): respect hidden toolbar tabs in every design

Remove feature-based visibility overrides for Sheet Metal and Weldments. Keep all tabs visible by default and preserve the user choice across feature creation, opening designs, selection and undo.

Signed-off-by: Karl Von Richter<karl@embeint.com>

---------

Signed-off-by: Karl Von Richter<karl@embeint.com>
2026-10-29 13:32:21 +00:00
07d692ee0d Keyboard Shortcuts: several keys for one command (#6273) (#6288)
* Keyboard shortcuts: a command can have several keys

Click a key on the Keyboard Shortcuts page to replace it, or the + after it
to add another; every key runs the command and menus show the first. One
key is still saved as a string, several as a list. Taking a key over from
another command leaves that command its other keys. ui.shortcut takes a
slot and reports every key.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Keyboard shortcuts: follow main's search layout; fix prefs test for key lists

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 12:32:19 +00:00
Lars Jansen 375dc01602 Navigation: Right drag orbits option; picking the SolidWorks preset turns it off (#6492) (#6497)
* claim: #6492

* feat(navigation): Right drag orbits option, off when picking the SolidWorks preset, which also fits on middle double-click (#6492)
2026-10-29 10:24:37 +00:00
austin62jakeandClaude Opus 5.5 d8d22cd52a 3MF export: a component's bodies as one object with parts (#8139) (#8187)
* claim: #8139

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* 3MF export: a component's bodies as one object with parts (#8139)

file.export and file.save_mesh wrote every body as its own 3MF object and
build item, so a slicer loaded a multi-body part as separate objects and
could arrange them apart on the bed. With objects: "component", each placed
component that holds two or more bodies is written as one object whose
<components> are its bodies' meshes, built once, so PrusaSlicer, OrcaSlicer,
Bambu Studio and Cura load it as one object with a part per body, each of
which can take its own filament. The design's own bodies, and a component
with a single body, stay objects of their own. The default (objects: "body")
writes the same file as before.

- io: model_xml_parts and write_3mf_parts write the parts; export_with_parts
  maps body names to them. model_xml_with and export_with_quality give the
  same output as before.
- engine: mesh_parts reads `objects` (component is refused for formats
  other than 3MF); component_parts groups the placed bodies by placement,
  each part named after its occurrence (Bracket:1, Bracket:2).
- file.save_mesh passes the parts on when it also sends the file to a slicer;
  file.send_to_slicer's own folder export is unchanged.

Fixes #8139.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-29 03:35:38 +00:00