A path a design names (a linked design, a sketch text's font file) now
goes through one rule before any file call: a network location is
reached only once its server is allowed, a device path never. Update
Links and Open Linked Design ask first (Allow once / Always allow this
server / Cancel); Preferences > Design lists the allowed servers and
can allow every network location. component.links reports such a
link's found as unknown with a reason, without looking for it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A homemade 3D input device's driver app (MAKMOUSE) listens on a loopback
port; with Preferences > Navigation > "Navigate with a device app on this
computer" on (off by default), the desktop app connects, says hello and
reads JSON lines: axis motion (orbit, pan or zoom by mode), zoom steps and
standard views. The motion goes through navigation::device like a 3D
mouse's, only in the focused window; a HID device the app names is left
to it. Documented in docs/3d-mouse.md.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat: add personal Hole parameter presets
* feat(hole): prompt for preset names and recall changed selections
Ask for a name only on Save new or Rename in the kit confirmation. Keep Enter and Escape inside the prompt, preserve cancelled drafts, recall only changed selections, and retain independent recessed-hole bottom choices.
* feat(hole): preserve thread direction and partial depth in presets
Carry Left/Partial, explicit source units and Custom draft guards through personal preset capture and recall. Preserve legacy Right/Full/flat defaults and reject unknown options before changing the form. This production bridge depends on the handedness and graphical-depth changes inherited below it.
* docs(hole): describe supported preset thread options
* feat(ui): save modified hole presets in place
* fix(presets): retain reference placement and current locale contracts
* test(ui): borrow restored preset library during serialization
* test(presets): preserve modal focus with viewport focus restoration
* Use UI kit controls for hole preset selection
* Themes: Clay (light) and Clay Dark, warm paper and charcoal with a terracotta accent
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Clay: on-accent text a touch lighter for 4.5:1 on the accent
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #1457
* Agent chat: tool calls read as summaries, raw JSON behind Details (#1457)
Each tool-call card now says what the call did, built from the command's
translated label, its main parameters (lengths in the design's units) and the
bodies the result names: "Extrude Sketch1 by 10 mm", "Box 40 x 30 x 20 mm,
then Fillet 4 edges (r 4 mm)", "Measured Block: ...", "Saved block.solidcraft".
Calls it can't put in words keep the agent's title. The raw arguments (now
kept from the in-app client and ACP's rawInput) and the result sit under a
folded "Details".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat cards: show file names, never paths; temp files not named
ui.screenshot reads "Screenshot"; save/export/open and other tools' titles
show only the file name. The full text stays under Details and in the tooltip.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #5681
* sketch: exact circular arcs on drawn 3D wires (#5681)
Add WireArc (centre, unit normal, radius, start/end) as an optional analytic
form on drawn 3D sketch wires, with arc_from_3_points, arc_sweep and
sagitta-bounded arc_polyline; add_drawn_arc_in stores the arc, its three
defining fit points and its samples; move_drawn_point re-derives the arc
atomically and refuses collinear points; validate_wires checks saved arcs.
* engine,ui: sketch.arc3d exact 3D arc command (#5681)
sketch.arc3d draws an exact circular arc through three world points in a 3D
sketch, stored analytically beside its fit points and samples; sketch.move3d
rebuilds it, sketch.inspect reports centre/radius/sweep; placement mapping
(map_wire, now shared with the engine's world state) transforms the arc.
One pending design-format file records the new field. The viewport's 3-Point
Arc tool draws a 3D arc when clicked off the sketch plane, with a live arc
preview; the SKETCH panel offers sketch.arc3d.
* ui,engine: 3D Arc button starts an interactive tool (#5681)
sketch.arc3d now maps to a Draw(3) tool handled by sketch3d: three world clicks (start, end, through - same order as the 2D arc tool) run the command, with the live arc preview and snapping. The command is only enabled while a 3D sketch is open, so the toolbar never offers a tool that could only fail. Locale labels for the command.
* ui: cargo fmt
---------
Co-authored-by: RayGalt <RayGalt@pm.me>
* claim: #4384
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: shared module, with Rest as the first tool
The Rest handles spike becomes a shared module, place_gizmo, so other features placed on a face can
use the same marker and knob. The mechanics (crosshair with its three states, the grab offset, the
footprint while dragging, the turn knob) live in place_gizmo.rs. The handles own the pointer through
canvas::owns_pointer, as the move triad does, so navigation and Select Other's press-and-hold leave
them alone. Each tool is one file under place_gizmo/ that gives a Spec: which dialogs it serves,
which commands' Position input also takes sketch points, where the place is, how the pointer
re-places it, its footprint and its turn, if any. The module lists the tools one per line, so tools
added on separate branches each add one `mod` line and one list line. Rest is the first.
The handles are always on; the preference the Rest spike had is gone. The POINTS accept flag on a
Position input is granted from the tools' Specs instead of a Rest-only arm in the plastic dialog's
start. Handles are published as `rest:position` and `rest:rotate` as before.
Seen straight down, the dialog's height arrow collapses onto the place and its value box sits just
right of it, where it took the press meant for a knob pointing that way. The knob now slides out
along its ray until it is clear of the box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Placement handles: Boss
The marker moves a boss across the model, also from Edit Feature, and its Position input takes
sketch points while the handles are on, so a screw boss can be dragged onto the centre of a
circle drawn for it. A boss is round, so it gets no knob; the footprint while dragging is its
outer circle. Published as `boss:position`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Placement handles: Snap Fit
The marker moves a snap fit across the model and its Position input takes sketch points while
the handles are on, so the arm can be put where a sketch says (#3423). The knob points the
catch: it turns between the four directions the Catch Direction combo offers for the face, so
the knob and the combo always agree; the command keeps only those four, so there is no free
turn. The footprint while dragging is the arm's foot, its thickness behind the place and its
width across. Published as `snap_fit:position` and `snap_fit:rotate`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Placement handles: the look in one file
Everything that draws the handles (the crosshair and its three eased states, the knob's ball, the
cased lines, the angle label, the colours) moves from place_gizmo.rs into place_gizmo/look.rs, so a
restyle touches one file and the mechanics (hit radius, drags, knob geometry) stay where they are.
No change in behaviour.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: behind a Design preference, off by default
The handles sit behind Preferences > Design > Placement > Placement handles (`placement_handles`,
also through `ui.prefs`), off by default as the hole placement work in #2912 is: a Rest, Boss or
Snap Fit is then placed by its click alone, its Position input takes faces only, and no handle is
drawn or published. The tests switch the preference on; one checks the default.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the tests hide the origin through set_origin_shown, as main does since #1849
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the move marker as designed in the prototype, drawn with theme tokens
The marker is a dot with four arms to the screen cardinals: short and dotted at rest, longer with open arrowheads when pointed at, solid while dragging, each state growing out of the previous one (360 ms). Sizes are the prototype's. Its core is the icon highlight and its casing the marker halo, the tokens main's hole handle uses, so the literal allowance goes. The tip shows while pointing, not during a drag.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the dialog's drag arrow stands above the move marker
With the handles on, the Height arrow started at the marker's centre and ran through its upper arm, head on arm tip. The arrow now keeps the marker's full reach and a gap free at the base, its shortest length grows by as much, and the base dot is left to the marker. Other dialogs are unchanged (clearance zero).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: a turn ring on the face replaces the knob
The ring lies on the face about the move marker's centre, drawn in perspective, a fixed 65 px on screen like the move triad's arrows (it is a control of something on the screen, not a measure of the model). At rest it is a short dotted arc with an open chevron grip just outside; pointed at, the dotted circle opens from the grip both ways round and the grip slides in and fills; while turning, a solid arc around the grip. Dragging the grip turns the feature as the knob did, through the same handle name, so the harness tests stand.
The floating value box yields: with a handle's centre under it, it moves to the other side of the arrow's tip or above it, since seen straight down the box sat exactly where the grip is. A handle the arrow's stem crosses keeps the pointer.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: a compass while turning, and the turn pulled onto the face's compass points
Four ticks just outside the ring at the face's in-face world directions (the ones the Snap Fit combo names, +X, −Y, …) appear while turning and stay put, so you can see how far you have gone. A Rest's turn is pulled onto one of them within 8°, otherwise it steps by 5° as before; Alt or Ctrl frees it. The readout beside the grip names the point it sits on ("90° · +X") and keeps clear of the ring.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the footprint in the preview's blue, the idle handle steps back
The footprint drawn while the marker drags is a filled shape in the preview's own blue with a thin darker edge, not a white outline, so white stays reserved for what can be grabbed. While one handle is dragged the other fades to a quarter and comes back when the drag ends.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the ring in the preference text, the docs and the tests' wording
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the look as tuned in the app
Marker: drawn to the redrawn design (dot r 3.9 pt, two dashes per arm, a filled head 8.7 × 7.1 pt whose base is where the outer dash began); pointed at, the outer dash becomes the head (its far end narrows to a point, its near end widens); dragging runs the inner dash on into the head as a shaft. Every casing is 0.4 pt outside the edge, for lines, heads and the dot alike.
Ring: the grip and the compass lie in the ring's plane like the circle, so the grip is never skewed against it; the grip is a thick chevron with a hole that flattens into the base as the grip slides onto the ring, and fills; the dotted circle stays while turning, with the solid arc laid over it; opening eases in and takes 0.3 s, leaving is a 0.15 s fade over the resting ring, not the sweep backwards; a drag keeps the angular gap of the press, so the grip does not jump onto the pointer; the compass ticks and the readout's point name are in their axis colours, and the grip takes the axis colour (eased) while aligned with one, with that point's tick left out; free turning keeps a hair of pull (0.5°) so an axis can still be hit; the readout wraps to a half turn.
Value box: with a ring it keeps out of the circle the ring, grip, compass and readout sweep, one place per view, nothing moves when a turn starts; also when the value does not evaluate and there is no arrow.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the readout shows a half turn as 180°, not −180°
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the motions in one place
The animations the handles grew (a factor eased in and out each way on its own time and easing, a handle stepping back while the other works, a colour that comes and goes from the last one it was on, the gap a press keeps for its drag, an offset that slides instead of jumping) move out of place_gizmo into motion.rs, so the next manipulator reuses them. The look's timings become Transitions in look.rs. No change in behaviour: the contact sheet before and after is identical, the harness tests stand.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the axis colours as main names them since #4430
The compass and the aligned grip take the one set of X, Y and Z colours (axis_x, axis_y, axis_z); the Move gizmo's own array is gone.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* Frames: a Weldments ribbon tab (#4003)
- WELDMENTS joins the ribbon after SHEET METAL and is built the same way:
Sketch (New Sketch), Create (Frame Member) and Configure (Parameters,
Configurations). Frame Member's home moves there from MODEL > Create.
- Always shown, as a frame starts from a sketch of its lines. It selects
itself and takes the contextual style when the selected body (or the last
body of the active component) is a frame member; sheet metal comes first.
- It uses the default accent until the palette has a colour for it.
- The tab label is in every catalog; docs/ribbon-layout.md, docs/frames.md
and the tab list in docs/control-protocol.md follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: Weldments keeps the ordinary tab look (#4003)
Weldments still selects itself when a frame member is the active body, but
no longer takes the solid contextual fill or the 2 px accent line under the
tab row: selected, it looks like a selected Model tab. Only Sketch and Sheet
Metal (on a sheet body) are contextual.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6646
* Control channel: document.revision, a design revision and a document id (#6646)
A program that follows the open design asks document.revision and exports
only when the answer moves: document_id names the open design (kept through
edits, saves and renames, another for each design started or opened, never
shared between two tabs or two runs) and revision moves whenever the design,
what is hidden or an uncaptured component position changes. It stays put on
reads, selections and view changes, unlike the session's view revision.
The revision is read lazily: the session remembers the design it last
reported (held weakly, so Arc::make_mut can never change it in place and its
address can't be reused) and takes a new number from one counter for the
whole run when the design is another one. The control method answers at once,
also while a slow command computes; engine.execute reaches the same command
for scripts and MCP.
* document.revision: hash the run's id prefix with the process's random keys
A clock set before 1970 gave every run the prefix 0, so a restarted app could
answer a new design with the id and revision of the old one. The docs no
longer promise an answer at once: a screenshot waiting for an opened design to
be meshed still holds the requests behind it.
* document.revision: its label in the complete catalogs (ja, zh)
* claim: #6985
* Control channel: control.subscribe and design.changed events (#6985)
A connection that sends control.subscribe gets the active design's id and
revision in the reply (as document.revision answers), then a
{"event":"design.changed","params":{document_id, revision}} line whenever
either changes, so a live link need not poll.
The window publishes the design at the end of each frame's logic and
drawing while a connection is subscribed (one atomic load otherwise). Each
subscribed connection waits on that from a thread of its own and writes
the latest after a 100 ms gap, so a burst of changes is one line. Replies
and events share one lock per connection, each written whole (#6390).
* control.subscribe: the reply before any event, a second one refused
The events thread started before the subscribe reply was written, so a
change right after the window's answer could reach the client before the
reply that named the older revision. The subscription now starts holding
the connection's line lock and writes the reply under it.
A second control.subscribe on a subscribed connection is refused on the
connection itself: its answer could arrive behind a newer event. When no
thread or socket is left for the events, the reply says it did not
subscribe instead of ok.
* control.subscribe: a second one does not lose a finished late reply
The already-subscribed answer came before the busy check, so a request that timed out and had finished since lost its reply: control.pending then said the app ended it without one. It now comes after the busy check and drops a finished late reply as every other request does.
* control_server: declare the subscribe guard at the top of the loop
Clear of the lines #6643 changes (its token check moves to where the declaration was).
* control_server: the subscription's items beside serve
Away from the lines next to send, where #6643 adds token_of.
* control test: New on a blank design reuses its tab, so redo the box first
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
Every view attached to an API-agent message stayed in the history as a
base64 data URL, and the whole history goes with every request (up to 24
per message). Requests grew by one screenshot per message until the
endpoint refused them with HTTP 413, after which every message failed.
Keep the newest two views as pictures and swap older ones for a short note;
the text sent with them and every other message stay. HTTP 413 now says the
conversation is too large for the endpoint and to start a new chat.
Fixes#2298
Main now speaks the Anthropic protocol too, where a view is an `image`
block rather than an OpenAI `image_url` part: drop_old_views trims both,
before trim_history. ui.ai_http_too_large is in every catalog that has the
other ai_http_* messages.
Co-authored-by: Framewrk CI <ci@framewrklabs.ai>
The catalogue entry Quantity served both the pattern dialogs' number of
instances and the motion study's plotted quantity. Nine locales had
translated the second meaning, so the rectangular pattern dialog showed
e.g. "Größe" above "Anzahl 2" in German.
The motion study's row now reads motion.plot_quantity (a pending file
that keeps every locale's previous word there). Quantity takes each
catalogue's own ui.quantity text, which the "Quantity 2" row already
shows; nothing is newly translated. The glossary lists Quantity under
words with more than one meaning.
Fixes#6538
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4846
* Assistant: say so when a turn ends without using SolidCraft's tools
When tools were offered and a completed turn made no tool call and no
change, the chat panel shows a short notice pointing to tool-capable
models: always for an empty reply, and for a text-only reply to an
explicit edit request. Plain answers to questions stay quiet. The
control channel exposes it as turnWarning.
* Fix the Anthropic loop test for the tools event; add ja and zh for the no-tool-call notice
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4146
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport theme: a light 3D view in a dark window, and the reverse (#4146)
Preferences › Interface › Theme gets a Viewport row under the theme tiles:
Follow theme (the default, as before), Light or Dark. Light or Dark draws
the 3D view in the built-in Light or Dark theme's colours whatever the
window uses, so a dark window can show the model on a light view and the
other way round; it works with every theme, theme files included.
The view takes the background and grid, bodies, selection and hover, the
origin, previews, sketches with their dimensions and glyphs, the navigation
cube and triads, box selection and the analysis colours. Panels, dialogs,
menus and the chips over the view keep the window's. Text and warnings drawn
straight onto the view (the sketch status line, the loose-end and midpoint
markers, the section's cut outlines, the 3D sketch tool and the sketch tools'
previews) take the view's side, so they read on its background.
theme::ViewportTheme is the setting (saved as `viewport_theme`: theme, light
or dark; an unknown saved value reads as Follow theme, as ColorVision's
does). Tokens::get() takes the view's colours from the other side only when
the view's dark or light differs from the window's; Tokens::view() is the
view's side for colours drawn onto it. The ground shadow follows the view
(the scene and highlight caches already key on the colours themselves),
ui.render draws in the view's colours, and ui.prefs takes `viewport_theme`
and reports `viewport_dark`. An older release ignores the setting and draws
everything in the theme.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport theme: follow the single set of axis colours
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Browser: surface bodies get the surface icon in the Bodies folder (#4165)
Every row in the Bodies folder had the solid body icon, so a surface (an
open shell, such as a Surface Revolve of an open curve) looked like a
solid. A body whose shell does not close now shows the existing surface
icon; solids keep the body icon.
Body::is_surface walks every shell's edges, so ModelBody caches it once per
body (shared by clones, like outline_bounds) instead of the browser
checking it every frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add the surface icon to the requested-icons manifest
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #4846
* Warn when Ollama models lack tool support (#4846)
Check Ollama model capabilities in the background and cache results per
endpoint and model. Show an advisory warning for models without tools,
expose it through ui.agent_chat, and document the behavior.
Cover capability parsing, warning selection, background probing, caching,
and selection changes with synthetic regression tests.
* Keep the Ollama capability probe out of the web build
The panel never calls it there, so it would only be dead code.
* Wrap the model warning instead of cutting it off
In a narrow panel the end of the sentence, the part that says what to do, was truncated.
* Fix AgentConfig default after rebase onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the Ollama no-tools warning into a pending locale file with ja and zh
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2348
* Open linked designs from assembly browser
* claim: #2348
* Test linked design action with multiple components selected
* Fix linked design lookup in browser storage and translate its menu action
* Add Turn Up Axis to complete UI catalogs
* Keep browser DXF download after linked-design checks
* feat: add colored components inspection toggle
* feat: persist component colors and add cycling controls
* feat: assign component colors in creation order
* fix: update component color menu integration and translations
* fix: proper description for pending format change.
* fix: deleted duplicated format change description from docs/pending.
* Compare the component colour counter in the features-only check
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Vadim Kalinsky <vadim@kalinsky.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #976
* One set of X, Y and Z colours for every axis (#976)
The origin axes, the navigation cube's triad, 3D sketch triads and joint
origins drew `axis_x/y/z` (255,0,0 / 0,255,0 / 2,2,248), the view triad and
the headless picture drew `triad` (220,60,60 / 60,170,60 / 60,100,230) and
the Move gizmo drew `gizmo` (225,70,60 / 80,190,80 / 70,130,240). The
`triad` and `gizmo` tokens are gone: every axis reads `axis_x/y/z`, now the
view triad's values (the engine's `view::colors::AXIS_*`, so headless
pictures are unchanged, and the set the red-green table was measured for).
Older theme files' `triad` and `gizmo` lists still read and set the axes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* i18n(uk): translate 188 pending messages
Bring the Ukrainian catalog up to date with en.json after rebasing onto the latest main. Covers the crash-report form, AI preferences, preferences pages, solid tool help, free orbit and history controls. Keys stay sorted via cargo xtask lists.
* i18n(uk): translate 114 pending messages
Rebase onto the latest main and bring the Ukrainian catalog up to date with
en.json. The new messages cover the mouse-gesture editor and navigation
preset help, the frames and sheet-metal dialogs, fillet control radii, the
timeline folder actions, the motion keyframe controls, library appearance and
library file actions, and the measure dialog.
Also correct "Add Key" to "Додати ключовий кадр": the only user of that
message is the motion keyframe button, and the catalog already translates
"Keys" as keyframes.
Keys stay sorted; cargo xtask lists --check and the i18n catalog tests pass.
* Sort the Ukrainian catalogue
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* i18n(da): complete upstream catalog and align CAD help terminology
Add 371 missing Danish translations, refresh changed source messages,
and independently rewrite six help descriptions from SolidCraft sources.
Preserve all 2397 keys, canonical ordering and placeholders.
* Sort the Danish catalogue
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4544
* Add Norwegian Bokmål translation
* Refresh Norwegian Bokmål translations against current main
* Drop Norwegian messages whose ids are no longer in the English catalogue
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>