69cfd89ae883a4aa4de2accd2216980da482128d
620
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
69cfd89ae8 | Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] | ||
|
|
9e6e0b8df1 |
Render workspace: complete experimental ribbon, resources and effects integration (#5493) (#5494)
* wip(render): reconcile completed material and image pipeline source with 0.20 (#5493) Source-only integration reference for staged review, not a merge-ready aggregate. Donor: 0xlillith/solidcraft@aea20b0115. Upstream: |
||
|
+33 |
b7b25f9e2b |
Render workspace: first basic delivery to main (#6050)
* Normalize UI container violation paths across platforms (#5599) Report repository-relative paths with forward slashes so diagnostics and the existing nested-package regression assertions agree on Windows and Unix. Keep the container detection rules unchanged. Validation: official ui-containers gate and all seven focused xtask tests passed; rustfmt and diff checks passed. Only xtask/dependencies were compiled; no application build or heavy tests. (cherry picked from commit |
||
|
|
a633a67e63 |
Preferences: choose the window system on Linux (Wayland or X11) (#3083) (#3084)
* claim: #3083 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * WIP: choose the window system on Linux in Preferences (#3083) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Preferences: a window system set over the control channel is saved for the next start again The merge kept main's check in ui.prefs, which only looked at the anti-aliasing. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Preferences: the window system section drops the restart badge its note already states Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
592f6a6fee |
ci: fix local scheduling and Windows test baselines (#4941)
* ci: repair local nextest scheduling and Windows fixtures * test: refresh MSVC robustness references and isolate GNU policy Integrate the Windows reference records from #3361 and the target-environment selection and recording policy from #4159. Keep shared records and comparison tolerances intact, and retain seed 36 as an existing failure tracked by #3583. Co-authored-by: Ray <raykholo@users.noreply.github.com> Co-authored-by: chris <christopher.nourse@gmail.com> * test: make CI subprocess and revolve fixtures deterministic --------- Co-authored-by: Ray <raykholo@users.noreply.github.com> Co-authored-by: chris <christopher.nourse@gmail.com> |
||
|
|
19db763899 |
Tapped Hole: verified metric fine, UNC/UNF and parallel G/Rp catalogues (#4178)
* feat: expand tapped-hole catalogue with metric fine and Unified sizes * docs: distinguish metric designations from expanded tapped catalogue * feat: add internal pipe catalogue and checked Rc profile data * Connect parallel G and Rp catalogues to cylindrical tapped holes * fix(i18n): register tapped thread catalogue labels * fix(i18n): complete thread labels in required locales |
||
|
|
9a737bd63c |
Linked components: joints keep their face after Update Links (#3330) (#4874)
* claim: #3330 * Linked components: joints keep their face after Update Links (#3330) A linked design comes in as STEP text, which keeps no face names, so the faces of its bodies were named by their place in the file (`face:<k>`). An edit of the part that adds a face earlier in the file (a second hole of the same size) gave that place to another face, and a joint on the linked part moved there silently. When a link is made or updated, each imported face is matched to the part face it was written from (the same geometry), and the Import feature keeps that face's name in the part (`Feature::link_faces`, a new pending format change). The linked face is named `F<import>🔗<digest of that name>`, pieces keeping their qualifiers, so references follow the part's own history through Update Links as they do inside the part, and a face the part no longer has is reported. Linked faces still answer to `face:<k>`, so older references keep resolving; Update Links warns about joints that use them and reports joints that no longer solve. * Linked faces: a solid's twin keeps its own names; renamed faces count as an update Two solids of a part alike in one place each take the names of the solid the file names them after. Update Links reports a link whose part named its faces differently since as updated (a joint may follow that name to another face), not as unchanged; only a link getting its first names stays unchanged. * Linked faces: Extract to File carries the design's face names too Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
8b65d41b31 |
Expression completion: keep longer names visible when the typed word is a unit (#3663) (#3664)
* claim: #3663 * Expression completion: keep longer names listed when the typed word is a unit (#3663) Typing `rad` into an expression box showed nothing because `rad` is the radians unit and a word that is itself a known token closed the popup. The popup now stays open on such a word. A complete name (`width` with `width_extra` defined) opens it unarmed: the longer names are listed with no row selected, Enter submits what was typed and Tab moves on; Up or Down picks a row, after which Enter or Tab complete it as before. A unit means something only after a number, so a unit typed anywhere else (`rad` on the way to `radius`) is a prefix like any other: the popup is armed and Enter completes `radius` instead of submitting one radian. A complete token is extended only by names that start with it (`in` lists `inner`, not `rounding`), a typed unit offers no other units (`in` does not list `inch`), and a unit right after a number (`2 in`, the form every dialog starts its sizes in) opens no popup at all, so nothing sits over a dialog's OK button. Fixes #3663 Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
|
807e367bdb |
Hole: place a Single hole by distances from reference edges (#37) (#2931)
A Single hole can take up to two straight edges of its face as references,
each with the distance of the hole's centre from that edge's line, measured
in the face's plane. `solid.hole` takes them as `references: [{edge, distance}]`;
the edges are found again by their persistent names, else their points, so
the hole follows them when the part changes, and each distance is a
parameter. A bad reference (no edge there, a curved edge, one square to the
face, parallel edges, a negative distance, a centre off the face) is refused.
In the Hole dialog, Reference 1 and 2 follow the face, each with its Distance
row; the canvas shows each distance as a dimension from its edge to the hole,
with a box just past the edge to type it in. Picking an edge measures its
distance (and its box takes the keyboard), typing one moves the hole, and
moving the hole measures them again. Edit Feature picks the edges again with
their distances.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
400e06c202 |
Hole: snap to face and round-edge centres, drag placed holes, section in the dialog (#2171) (#2912)
Placing a Single hole put it exactly where the click landed, with nothing to line it up by and no
way to move it but taking it out and picking again; the dialog was a list of size fields.
- Preferences › Design › Create Hole has two settings, both off by default, so a new installation
places holes as before:
- Snap to face and edge centres (`hole_snaps`): the planar face under the cursor offers its
middle and the centres of its round edges (a boss, a rounded corner, a hole already there) as
marks; a pick near one, or on or beside such an edge, takes that centre and the mark is named.
Sketch points on the face still come first; Alt or Ctrl held places it where clicked.
- Move holes by clicking or dragging (`hole_moves`): each placed hole has a handle that drags it
(snapping when snaps are on) and takes it out when clicked, and a pick elsewhere on its face
moves it there. Edit Feature shows the handle too, so a hole can be moved later (#1047).
- The Hole dialog draws a section of the hole as its options make it, with each size in a field
beside the dimension it sets; a hovered or focused field lights its dimension. The layout is a
new kit element, `ui_kit::figure_rows` (a caller-painted figure beside captioned fields).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
1fa0371c75 |
Pattern dialogs: Quantity fields get up/down step arrows (#4260) (#4264)
A new kit control, `ui_kit::count_field` / `count_row`, is an expression field for a whole-number count with stacked step arrows at its right edge. An arrow steps the evaluated count by one within the field's limits: a plain number is replaced, an expression keeps its parameters and gains or adjusts a trailing `+ n`. The text changes as typing changes it, so the live preview follows. Used by the Quantity rows of the sketch Rectangular (1-500, both directions together at most 500) and Circular (2-500) patterns, and the solid Rectangular, Circular and Path patterns (1-1000). Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
fc3e3b6c8d |
Join: say so when the joined piece doesn't touch the body (#4434) (#4436)
* claim: #4434 * Join: say so when the joined piece doesn't touch the body (#4434) A Join (extrude, revolve, sweep, loft, pipe, coil, primitives, thicken, boundary fill, surface network) whose material meets none of its targets still joins it to the first target as a separate piece. The result stays as it was; the feature now warns: "the joined piece doesn't touch `Body1`, so `Body1` is now in 2 separate pieces (New Body makes it a body of its own)". History marks it and the command reply carries it. The check compares pieces (outer shells, not voids) of the bodies the feature changed or absorbed before and after it, so it holds for the batched multi-profile path too, stays quiet for a join that bridges pieces or closes a cavity, and leaves Combine (which joins the bodies it is given) alone. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
612d9d08dd |
cadmpeg 0.6.3: FreeCAD and Rhino import in the browser too (#4482)
cadmpeg 0.6.3 is pure Rust (ruzstd instead of the zstd C library, zip 9), so solidcraft-io depends on it on every target and the wasm build reads .FCStd and .3dm files like the desktop app. The browser's file pickers offer them. 0.6.3 replaces DecodeOptions::container_only with a decode depth; ask for Geometry, what its STEP writer reads. zip 8 leaves the tree, and with it the three cargo-deny advisory exceptions kept for it. Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> |
||
|
|
1f6a2d4daf |
3D mouse: driver choice, guided calibration, button mapping and a picture of the device (#1463) (#3825)
* Add a small test boat to steer around with the 3D mouse A little hull in its own camera, drawn by the UI itself and not the CAD viewport, so a 3D mouse can be tried out without opening a design. It brings the model (generated by assets/models/make_test_boat.py) and the tests for how the camera moves it. Nothing uses it yet; Preferences picks it up with the rest of the 3D mouse work. * UI kit: keep a choice row from flipping with the scrollbar A choice row picks segments or a dropdown by whether its labels fit. A page scrollbar that comes and goes narrows the row by its own width, so the row could flip back and forth between the two on a page that sits right at the edge. It is now judged on the whole row and through a small helper, fits_steadily, that only changes its answer once the miss is wider than the scrollbar. Also tests for that, for typed numbers in a slider's value box, and a test hook to put up the issue-report input barrier by hand. * 3D mouse: device model, guided calibration, buttons and a picture The 3D mouse becomes a device we know something about instead of six raw numbers. The reader picks between spacenavd and the direct hidraw driver, falls back from one to the other, and says so when it can't open the device. Guided calibration asks whether the device is a spring cap or a trackball, adds a touch step, and uses a settle filter so a ball let go of stops reading as motion. Buttons get jobs (keys, held modifiers, commands), saved per device, with defaults for the SpaceMouse Pro. Preferences gets a picture of the device that moves as it does, next to the test boat, and the same picture can sit in the 3D view at Left Viewport, Right Viewport or Left Window, above the floating History card like the legend and readouts. These ride together because the crate's calibration types, the Preferences page, the Linux reader and the button hook all use each other. * 3D mouse: offer to calibrate an uncalibrated device When a 3D mouse shows up that has not been calibrated, a card in the 3D view offers to calibrate it, to swap drivers when the other one would work better, to close, or to never ask again. It is made once per device, goes away after 30 seconds in view, and gives way to a status or computing toast instead of stacking on it. The card is the shared toast, which now takes buttons: they group by purpose, wrap inside the card at narrow widths, and do nothing while an issue report holds CAD input. The picture of the device in the 3D view keeps clear of the card. * 3D mouse: translations and attribution The 3D mouse strings (ui.3d_mouse_*, the calibration steps and the offer card) in every shipped language, the Japanese catalog note, and the credit for the test boat model in ATTRIBUTION.md. This is last because the code before it only looks keys up: it builds and runs without these, falling back to English until they land. * 3D mouse: draw its preferences with the settings kit like the rest of Navigation The 3D mouse section was a folded header with its own layout. It now uses the same kit as the sections above it: a settings_section card, settings_form rows with the shared label column, dividers between the device, axes, picture and buttons groups, Text::Hint for the helper lines, and settings_control_width for the dropdowns. The section is open like every other one (the header still folds it), so the device badge on the folded header is gone; the calibration row already names the device. Every setting, string and key is unchanged. Tests that unfolded the section no longer click it, and the hint lines are looked up as hints instead of notes. * 3D mouse: show each axis's live tilt in Preferences, like main's axis rows Each view axis row is main's axis row again: a meter that follows the tilt of the motion driving it, with the dead zone marked, next to Invert, Speed and the "driven by" menu. The meter reads the calibrated travel when the device has a calibration and the raw reading over full scale when it does not, and asks for a frame whenever the reading changes. The helpers are back as they are on main, and the calibration state is a badge by the enable toggle. * 3D mouse: line its preferences up with the rest of Navigation - The two checkboxes sit side by side in the same two-column grid as Wheel and trackpad. - Row labels stop repeating "3D mouse" and use sentence case: Calibration, Driver, Restore defaults, Reset view, Left viewport, Right viewport, Left window. - Hints line up under the control column instead of the left edge. - The six view axes are named Pan X, Pan Y, Zoom, Orbit X, Orbit Y and Roll so they fit the name column. - Buttons are a divider and rows in a form like the other groups, without the bold sub-heading. - The driver, dead zone, axes, picture and buttons sit behind a collapsed Advanced section, since most people never touch them. * 3D mouse: tidy the Advanced test for clippy |
||
|
|
6c6ffe4802 |
MCP: wait out long requests, honest batch outcomes, batch tool aliases (#2901)
Rebased onto main as one commit (was 120d26f7, df488f9a, db9d1073 plus merges of main). - A request the app reports as still running (#1618) is waited for on the same connection through `control.pending`; past the wait the error says it was not cancelled and will still apply (or only write its file), later calls are not sent behind it, and the new read-only `pending` tool returns its result once it lands. - A failed batch says what really happened: `rolled_back` only when the design is back where the batch started (as #3288 / #3242 on main: the app's `rolled_back` is believed; for an older app, every completed step undone; only a rollback asked for is reported as one), plus `applied`, `not_run` and `failed.still_running`. - A batch step may name a tool (set_parameter, list_commands, describe_command, execute, measure, inspect_design, undo, redo, export, save, open, new_design, crash_reports); screenshot, body_topology, batch and pending are refused before anything is sent. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
46fca160e1 | Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] | ||
|
|
16727f331c |
docs(mcp): Windows setup for Claude Desktop (#3794)
* docs(mcp): Windows setup for Claude Desktop (paths, two servers, Store config file) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(mcp): say the Store build can keep the config elsewhere, not that the other path fails Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
fb374b543b |
UI: integrate theme radii, borders, palettes and viewport refresh (#5045) (#5046)
* claim: #4922 * UI: let themes own corner radii * UI: use four-point panel and window radii in SolidCraft 95 * UI: align the 95 radius assertion with four-point panels * claim: #4953 * UI: let themes own structural and control borders * UI: single Blueprint outlines and dotted secondary rules * UI: separate container outlines and add theme-owned 95 bevels * claim: #5007 * UI: apply theme palettes to icons, workspace tabs and Gruvbox settings * claim: #5045 * Viewport: invalidate cached geometry colours when the theme palette changes * UI: preserve legacy theme logo colours with the borderless mark |
||
|
|
0dffb206b1 |
Assembly: ground the first part; drag free joint chains (#2804) (#2805)
* assembly(feat): ground first parts and drag free joint chains Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR. Signed-off-by: Karl Von Richter<karl@embeint.com> * assembly(fix): update movable fixtures for first-part grounding Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests. Signed-off-by: Karl Von Richter<karl@embeint.com> * assembly(test): keep the motion-cost crank free Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure. Signed-off-by: Karl Von Richter<karl@embeint.com> * assembly(test): free the frame placement fixture Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main. Signed-off-by: Karl Von Richter<karl@embeint.com> --------- Signed-off-by: Karl Von Richter<karl@embeint.com> |
||
|
|
1ed394f8d6 |
Extrude: picking a face, vertex or parallel plane off the profile switches the extent to To Object (#2855)
* Extrude: picking a face, vertex or parallel plane off the profile turns the extent to To Object With profiles picked, a face off their plane (or curved), a vertex off it, or a construction plane parallel to it is taken as the To Object target instead of another profile: the extent switches without the Extent Type choice, and the distance shows how far the target is. Coplanar faces still join the profiles. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Extrude: automatic To Object is a Preferences setting, off by default Preferences > Design > "Extrude to a picked target" (`extrude_auto_to_object`, default false) turns the automatic To Object on. Off, picks in the Extrude dialog only add profiles and the distance is not synced to a target, as before this change. --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
6eaf723041 |
fix(ui): preview shortcut chords and wait for complete modifier input (#1810)
Keep physical modifier events out of the ordinary-key slot, preview held keys immediately, and confirm after release and a one-second settling interval. Preserve legacy control-channel modifier behavior while allowing explicit physical Control/Command input. Add regression coverage, a UI scenario, localized guidance and documentation. Fixes #1809. Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
98c4f335e8 |
Control channel and MCP on by default, with a setting to turn it off (#5561)
The app opens its localhost control channel on port 27878 (or the next free one) unless Preferences > Assistant turns it off; --control and SOLIDCRAFT_CONTROL_PORT still win. A current.port discovery file lets solidcraft-cli mcp find the running app with no arguments. Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
e5dffc7052 |
Flatpak: find the host's fonts for CJK text and the font list (#5124) (#5127)
* claim: #5124 * Flatpak: find the host's fonts for CJK text and the font list (#5124) Inside the Flatpak sandbox the host's fonts are mounted at /run/host/fonts and /run/host/user-fonts, which no font search looked at. Japanese and Chinese text fell back to boxes, and the font list missed the host's families. - Search both folders for the CJK and Chinese fallbacks and for the installed-font list. - The CJK fallback reads SOLIDCRAFT_FONT_DIRS (a path list, as the font list already does), with CRAFT_FONTS_DIR kept as a fallback. |
||
|
|
8c977131d9 | Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] | ||
|
|
fa2c1c31f6 |
3MF import: name a Bambu Studio project's bodies after its objects (#3858) (#3859)
* claim: #3858 (3MF import: names from a Bambu Studio project) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * 3MF import: name a Bambu Studio project's bodies after its objects (#3858) Bambu Studio leaves the name off the root model's objects and keeps it in Metadata/model_settings.config (<config><object id="N"><metadata key="name">), so every object of a project came in as Mesh1, Mesh2, ... A build item whose root object has no name of its own now takes the object's name from those settings. A name in the model still comes first, and part names, other settings and objects of other model parts are left alone. The settings are read only when a body needs a name, within what the model parts left of the 1 GB budget. Settings that can't be read (malformed, nested too deeply, too large) never fail the import: the bodies keep the generic names, with a warning saying why. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
7e472bc4da |
Cancel Sketch: leave a sketch without keeping its changes (#3838) (#3938)
* claim: #3838 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 * Cancel Sketch: leave a sketch without keeping its changes (#3838) sketch.cancel (Cancel Sketch, ribbon Exit group and the sketch's right-click menu) puts the design back as it was when the open sketch was created or opened for editing: a new sketch is removed with its dimension parameters, an edited one returns to how it was. It is one undo step, so Undo goes back into the sketch. The session remembers the design and the undo history at the point a sketch is entered. Cancel uses that only while the history still runs through it (the same steps before, every step since taken in this sketch); otherwise it refuses and points to Undo, so a stale entry can never throw away later work. The icon is the approved close glyph in the sketch accent (alias sketch_cancel); ja and zh carry the new label. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d78494e016 | Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] | ||
|
|
04dc68d988 |
macOS: Fusion navigation preset does not support Shift + two-finger orbit (#3446)
* Macos: keep touchpad/key modifiers true to fusion * fix: remove obsolete orbit snap reset from trackpad navigation Upstream removed ViewportState::orbit_snap. The new trackpad orbit path retained one reference, causing E0609 in the PR merge build. Validation: all seven trackpad tests pass; cargo check -p solidcraft-ui-egui --all-targets passes on the exact failing CI merge 66a2791b with this fix applied; rustfmt and diff checks pass. Co-Authored-By: GitHub Copilot <noreply@github.com> * fix: retain Fusion trackpad help in refactored preferences Preserve upstream's new preferences pages and apply the translated Fusion trackpad tooltip in prefs/navigation.rs. Validation: cargo build -p solidcraft passed. Tests and full CI were not run, as requested. Co-Authored-By: GitHub Copilot <noreply@github.com> * style: format Fusion trackpad preferences tooltip Apply rustfmt's required wrapping for the relocated tooltip. No behavior changes. Validation: cargo fmt --all -- --check and git diff --check passed. Co-Authored-By: GitHub Copilot <noreply@github.com> --------- Co-authored-by: GitHub Copilot <noreply@github.com> |
||
|
|
27d2fe6ec0 |
Frames: profile library, members along frame sketch lines, and the Frame Member dialog (#4003) (#4004)
* claim: #4003 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: the profile library (#4003) The first slice of frames and weldments: the cross-sections structural members will be made of, each SolidCraft's own parametric definition built in code (no vendor or standard size tables are shipped). - solidcraft_doc::frame: bar, round bar, rectangular and round tube, angle, channel, I-beam and a generic T-slot extrusion as exact line/arc regions, with defaults worked out from the profile's size, refusals that name the dimension that does not fit, anchors and placement, and exact section properties (area, centroid, Ixx/Iyy/Ixy by Green's theorem). - frame.profile.list, frame.profile.properties (with mass per metre for a density) and frame.profile.insert (draws a profile into a sketch, locked by default, at a point, anchor and angle). - Tests against hand-computed values (rectangles, circles, composite rectangles by the parallel-axis theorem, fillet spandrels), hostile input, extrusion volume, undo; catalog entries in every locale; docs/frames.md; ROADMAP M15. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: drop the built-in T-slot profile (#4003) Aluminium extrusions and other vendor sections come from the user's own sketch (drawn or inserted from the vendor's DXF), so the library keeps the plain steel shapes only. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: members along frame sketch lines (#4003) frame.member lays one body per straight line of a frame sketch (2D lines or 3D sketch lines), its cross-section square to the line from end to end: - profile: a built-in profile, or profile_sketch, a sketch whose material (nested loops alternating, so two circles make a tube) is the section in its own x and y around its origin; profiles picks override it. - anchor (origin, centre, centroid or a bounding-box corner or edge middle), angle (an angle expression, so a parameter), mirror. - Orientation: the profile's y as near world up as the line allows, x square to both; a vertical member's x is world X (frame::member_axes). - Members follow sketch and parameter edits, undo as one step, save and reopen (format: pending/frame-members.rs), and are named after the profile (Rect Tube 40x40x3, (2)…), numbering on past names already taken. Tests against hand-computed volumes and bounding boxes (rectangle, 3D tower lines, parameter edit, sketch tube profile and picks, anchor/angle/ mirror), refusals, undo/redo and reopen; walk fixtures and goldens; docs. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: fixes from the adversarial review (#4003) - Default member lines are what was drawn: projected and other linked curves and 3D wires (a face sketch's edges) and lines of no length are left out. - A profile sketch's material starts from its drawn profiles, as solid.extrude's "all" does, so a section sketched on a face works; the even-odd test uses outlines and boxes worked out once, capped at 256. - Member names are pinned to their lines (`names`, by line id; `body_name` is the base): deleting or adding a line, or deleting another feature, no longer renames other members, and frame.member stores every name it gives. body.rename renames a member on its line (also for later member features); a copy whose body_names were set still names its members by position. - Built-in profile dimensions are expressions (ProfileSpec): they follow parameters, bare numbers take the design's units, and they are feature inputs. frame.profile.properties/insert read them the same way. - Default root/toe radii shrink to the room a thick section leaves; radii given are checked by name; a radius must be 0 or at least 0.01 mm; error messages report the wall or flange value given, not twice it. - A line within 1e-6 rad of vertical orients as vertical, so rounding never turns a post a quarter turn. - A 2D frame sketch in a differently placed component is mapped into the member's frame, and member features recompute when placements change. - Caps before lookups for a design's `lines`; a line listed twice is refused; a 3D wire that runs back on itself is not a line. Regression tests for each, from the review's scenarios. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: the Frame Member dialog on the ribbon (#4003) - Frame Member (MODEL > Create) opens a dialog: the frame sketch's lines picked in the view (or All Lines), a built-in profile and its dimensions or a section picked in another sketch, anchor, angle, mirror and name, with a live preview. Edit Feature reopens it filled in. - Lines picked in the view keep their sketch (a SKETCH_LINES input picks ExternalSketchCurve): line ids are each sketch's own, so two 3D sketches both have a `w2`, and the members went on the newer sketch's lines. - timeline.redefine takes frame.member. Members keep their names through an edit unless it gives them a new body_name; frame.member takes `names`. - A member whose section is a whole profile sketch keeps it when edited (the dialog shows the sketch instead of picking every region, which would fill a tube's hole). - An original frame_member icon, open for review, on the ribbon, timeline and browser. - The angle profile is listed as L-Angle, and web and flange as Web/Flange thickness, so they translate apart from the existing Angle, Web and Flange; the dialog's labels are in en, ja and zh. en-GB no longer repeats the frame command labels it spells the same. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
c3ed8b1c07 |
Offer to stand up SolidWorks files instead of turning them silently; add Turn Up Axis to the component menu (#5655)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
2a02eb71ac | Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] | ||
|
|
4b42ef50c7 |
Mesh leftovers from the ribbon redesign (#133) (#4471)
* claim: #133 * mesh: Save As Mesh declares the panel that shows it (#133) The ribbon redesign (#2176) removed the MESH tab, but three things still pointed at it: - `file.save_mesh` declared `.at("MESH", "MODIFY")`. The command inventory prints the placement a spec declares, so `docs/features.md` advertised a `MESH > MODIFY` location no ribbon has. Its real home is already INSERT / FILES (`SECTIONS` lists it), so the declaration now agrees with the ribbon; `destination()` resolved it there before and after, so nothing moves on screen. - The user guide sent people to "the Mesh tab under Modify" for Save as mesh. - A test now refuses any command that declares a tab the ribbon removed, and pins where Save As Mesh lives. `PLACEMENTS` keeps its MESH entries: those migrate toolbars users saved under the old panels, which is a different question from what a spec declares. --------- Co-authored-by: Geraldrunion <geraldrunion@users.noreply.github.com> |
||
|
|
3ed1829cc7 | fix: retain circular sketch pattern Quantity expressions (#4435) (#4607) | ||
|
|
e33c371e99 |
Model cache: thin the checkpoints of a design too big for its file instead of leaving the cache out (#3220) (#4882)
* claim: #3220 * Model cache: keep fewer states of a design too big for its file instead of none (#3220) A model cache over the container's budget keeps the final state, then the slowest features' states while the bodies they add fit (a body several states hold counts once), and is left out only when not even the final state fits. Opening evaluates just the features whose state the file left out, each from the state before it, so the model is whole afterwards. * Model cache: keep each encoded body apart, copy only what a cache stores Encoding a model too big for its file no longer copies every distinct body into one buffer before thinning: the payload is copied from the encodings once its size fits, so saving holds no more than before. * Model cache tests: canonical runs in the timeline fixture; rustfmt * Model cache: count the records a thinned cache keeps; always try the final state Thinning counted only the bodies, so a model of many copies of one part (records, not bodies, filling the room) shrank its budget to nothing and saved no cache although its final state fitted. The choice now counts the records of what it keeps, always keeps the final state, and says what it counted, so each retry keeps less and the final state alone is always tried. * docs: a thinned model cache counts its records and always tries the final state * Model cache test: the slowest feature's state holds bodies 16 to 23 * Model cache: thinned opens with fingerprints that read the state before a feature Since #3397 a feature's fingerprint reads where the bodies before it lie. After a state the file left out, adopt takes the saved fingerprint and the evaluation that works the state out checks it. A result evaluated ahead is never taken as one the file left out. The thinned round trips include the placed components' design, whose cut reads those placements. --------- Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com> |
||
|
|
dad28abecf |
solidcraft-cli bench-assistant: the standard Assistant model test (#4851) (#4930)
* claim: #4851 * solidcraft-cli bench-assistant: the standard Assistant model test Runs the eleven v1 tasks of #4851 against a desktop app that is already running with a control port. Each task starts a new design and a new chat with All permissions, runs only the prescribed setup, sends the prompt once and waits for the turn. The result is checked on the design (document.inspect with measurements): body count, volume within 1% (0.3% for the fillet), bounding-box size in any orientation, the lowest corner, the body name, live feature kinds, and changed or unchanged content; the volume question is checked on the reply. Failures get the issue's categories from the conversation's items. Prints a table, and writes the issue's comment template (--markdown) and the raw results with each conversation (--json). |
||
|
|
36a354e3a7 |
Agent chat: serve the bundled skills' reference through an MCP tool (#4966) (#4970)
* claim: #4966 * Agent chat: serve the bundled skills' reference through an MCP tool (#4966) The bundled skills start with "read reference.md", but SolidCraft's own chat turns the agent's file tools off, so its agent could not follow them. The MCP server gains a read-only `skill_reference` tool that returns a skill's documents from copies built into the binary. It takes a skill name and a file name from a fixed list, never a path, and refuses an unknown skill or file with the available ones. The skills point to it, and docs/mcp.md and skills/README.md describe it. |
||
|
|
80fd2fbbf1 |
Assistant: add Anthropic-compatible API agents (#5015) (#5017)
* claim: #5015 Co-Authored-By: Claude Code <noreply@anthropic.com> * Assistant: add Anthropic-compatible API agents (#5015) The Add agent wizard now offers Anthropic-compatible endpoints beside OpenAI-compatible ones. The API backend speaks the Anthropic Messages protocol with the same MCP bridge, tool gate, limits, undo and keychain rules: x-api-key and anthropic-version, a top-level system note, input_schema tools, content-block answers and one user tool_result message per round. Test sends a short message because compatible endpoints (Qwen's) need not list models. Co-Authored-By: Claude Code <noreply@anthropic.com> --------- Co-authored-by: Claude Code <noreply@anthropic.com> |
||
|
|
9852a2e758 | Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] | ||
|
|
2dc31a30d4 |
Extract to File: move a component into its own linked design (#5113)
The component's sketches, features, bodies, subcomponents, the joints among them and the parameters they use move to a new .solidcraft design, keeping their ids and names, and the component becomes linked to it as Insert Design makes it. The new design must build the same bodies and the assembly must look the same afterwards, else nothing changes and no file is written. Joint faces on the component are found again on the linked bodies, and components that build the same bodies can become placements of the link. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
ae3b36ac88 |
Agent cursor follows the agent's own pointer input (ui.move, ui.click, ui.drag, ui.scroll) (#5162)
The agent cursor only acted out engine commands: pointer input sent over the control channel reached the app as synthetic events without moving it, so an agent's clicks, right-clicks and drags were invisible to a person watching. While the cursor is shown, each synthetic pointer event now moves it to where the input lands, a press leaves a ripple, and a drag is followed step by step. A request being acted out keeps the pointer; with the cursor hidden nothing changes. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
b6a45b8278 | Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] | ||
|
|
63d81cc096 |
Motion Trace: regenerate kept curves only when inputs change (#5248) (#5270)
* claim: #5248 * feat(motion): regenerate kept traces when source inputs change * feat(motion): add a parametric Chebyshev trace demo * perf(joints): reuse face measurements across motion samples Face-centred joint origins called Body::faces on every solve, bypassing the reference-mesh reuse used for rigid placements. Share face measurements with unchanged model geometry at the existing tolerance, while guarding replaced bodies and applying offsets after the cached measurements. Cover repeated named/nearest-face solves, shape edits, retained snapshots and direct replacement with deterministic work counts. The 145-point Chebyshev dimension and range updates retain identical sampled and interpolated curves. * perf(naming): skip preparation for cached face names Both face lookup paths spawned fresh workers over every body even when their name cells were ready. Prepare only cold cells, with direct handling of zero or one cold body. Preserve the existing parallel naming path and all face selection semantics. Deterministic regressions cover repeated picked and unique-name lookups, misses, partial warmup, renames, snapshots and moved copies. Release Chebyshev medians fall from 859 to 50 ms for a dimension edit and 871 to 34 ms for a sweep edit; all 145 samples and interpolated points remain identical. Full cargo xtask ci passes with RUST_TEST_THREADS=4 and the existing local Windows validation overlays. |
||
|
|
94279fe059 |
Web: Ctrl+Tab and Ctrl+Shift+Tab switch browser tabs again (#5227) (#5350)
* claim: #5227 * Web: leave Ctrl+Tab and Ctrl+Shift+Tab to the browser (#5227) eframe cancels the default action of every Tab keydown on its canvas (egui moves focus with Tab), so browsers that let a page cancel their shortcuts, such as Vivaldi, could not switch tabs while SolidCraft had the keyboard. A capture listener on the window now stops Ctrl+Tab and Ctrl+Shift+Tab before they reach the canvas, without cancelling them, so the browser acts on them as usual. Plain Tab and Shift+Tab still move between the app's fields. Desktop builds are unchanged. web-api-test checks it in headless Chrome: Ctrl+Tab and Ctrl+Shift+Tab keydowns are not cancelled, Tab still is. --------- Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com> |
||
|
|
867df396ea |
Agent chat in the Flatpak says why no agent is found and how to allow one (#4765) (#4769)
* claim: #4765 * Agent chat: explain the Flatpak sandbox when no agent is found (#4765) In the Flatpak the sandbox has no home-folder or network access, so agents installed through nvm or ~/.local/bin are never discovered and the chat only said that no agent was found. With FLATPAK_ID set and nothing discovered, the picker and Preferences > AI now say why and offer the exact `flatpak override --user ai.storyteller.solidcraft ...` command with a Copy button. The message is in every catalog, and docs/agent-chat.md gains a Flatpak section listing what each permission is for. The manifest is unchanged. |
||
|
|
edf57cec29 |
Stand up Y-up STEP and IGES files from SolidWorks automatically (#5191)
* claim: #5150 * Stand it up: don't offer it for SolidCraft's own STEP files (#5150) STEP replies from file.insert_step and doc.open now carry the file's originating system, and the window skips the stand-up offer when it is exactly SolidCraft, as SolidCraft's STEP export writes it. * Stand up Y-up STEP and IGES files from SolidWorks automatically The STEP header (originating system, preprocessor version, FILE_DESCRIPTION) and the IGES global section's native system ID say which program wrote a file. A SolidWorks header means Y up: the import's component is stood up as it opens, as one undo step, and the message offers Undo. SolidCraft's own files are left alone; an unknown exporter keeps the offer. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: Ray <raykholo@users.noreply.github.com> Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
0c72ad56d2 |
An idle window draws nothing with the frame-rate readout on (#5165)
The viewport's frame-rate readout asked for a new frame every frame, so with it on an untouched window redrew as fast as the display allowed and kept the GPU busy: 77% GPU at 60 fps on an M1 with a 5K display showing the sample, against 0% with the readout off. It now asks for no frames of its own and shows how often the view really draws; one frame a little over a second after the frames stop shows the view idle at 0 FPS. The preference's note no longer says the view redraws continuously. The status toast also asked for a frame every half second for the six seconds it shows; it now asks for one frame, when it is due to go. |
||
|
|
92d3a2fde5 |
GPU: a lost device stops drawing instead of crashing (#4172) (#4229)
* claim: #4172 * GPU: a lost device stops drawing instead of crashing (#4172) After the driver resets the GPU (Windows TDR), the first queue write to meet the lost device panicked inside wgpu-core (PendingWrites::activate unwrapping DeviceError::Lost). Nothing watched the device for its loss. - egui-wgpu: RenderState::device_lost (DeviceLost) is set by the device's lost callback. The painter draws nothing on a lost device, and before a frame's uploads it submits nothing (DeviceLost::probe), so a loss the driver reports is found by that submission instead of the first write. - Pictures (thumbnails of saves, ui.render) watch the same flag: on a lost device the capturer refuses with GpuError::DeviceLost without touching it, and the picture comes from the CPU rasterizer. Headless capturers watch their own devices. - The app, seeing the loss, closes keeping unsaved changes for recovery (as a forced quit does) and starts again; the new start says what happened. A second loss within ten minutes starts on the software renderer. The loss is noted in the crash journal. |
||
|
|
971b28c982 | claim: preferences redesign (#4608) | ||
|
|
f79cbc216c |
Redesign the home page as the File view (#2027) (#3822)
* claim: #2027 * Redesign the home page as the File view (#2027) * Match the File view with the accepted component design (#2027) * Restore the Start subtitle and simplify the recovery icon (#2027) * Integrate File view with main's shared UI containers |
||
|
|
4b23bb3a03 |
Implement compact workspace layout (#2029) (#4533)
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover * Vertical history strip: seam handle to expand and collapse names, drag to resize with snap * Vertical history strip: no empty gap below the transport * Show the history seam arrow only on hover (#2028) * claim: #2021 * Redesign the Assistant chat panel with shared UI components * Show Assistant in the shared floating panel shell * Extend floating Assistant to viewport height and shift navigation * Dock Assistant before history and match docking preview bounds * Align Assistant top margin with floating shell cards * Extract a shared panel drag grip * Rebuild responsive history sizing and three-way docking * Share browser and History collapse hover styling * Show the History title as soon as its text fits * Animate stacked browser and History expansion and collapse * Make panel folding responsive and independent of frame delays * Let folding panel contents shrink continuously to header height * Use four explicit History transport actions in every layout * Resize the shared Browser and History column from either card * claim: shared compact-mode containers (#2029) * Centralize layout-aware UI containers and enforce their use * Keep docked Assistant at the outer edge beside tool sheets * Use shared surface policy for Assistant tool space * Let tool sheets drag over shell panels while avoiding Assistant * Update Parameters drag bounds assertion for shell overlap * Keep dragged tool sheets below ribbon and workspace selector * Enforce universal UI containers in mandatory repository checks * Remove legacy report windows and require shared window composition * Remove retired UI styling and require shared controls * claim: compact layout preference (#2029) --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |