Commit Graph
2866 Commits
Author SHA1 Message Date
Jackson OurslandandClaude Opus 5.5 f843a3f83c Picking: remove the GPU pick buffer, the per-body BVHs answer alone (#4665) (#4666)
The pick buffer drew the model's surfaces and edge ids for every still
view to narrow which edges a pick tests. Measured against the BVHs alone
(release, M2 Max, 1400 x 900 view, 600 cursor positions), a pick costs
2-51 us through the BVHs and the tile saved 0-4 us of it, while each pass
cost 0.7-12.5 ms of GPU time per still view, plus gathering its scene on
the window thread, read-backs a frame or two late and repaints to wait for
them (and, before, a copy of every triangle, which made it refuse models
past 6 M triangles). Picks are unchanged: the BVHs give the same answers.

`pick_timing_on_curved_models` gains eight layers of bodies seen from above
(the pick buffer's best case) and `SOLIDCRAFT_BENCH_MESH` placements.

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-22 12:03:37 +00:00
Jackson OurslandandClaude Opus 5.5 f0fd5c10b7 Viewport: keep a face's hover highlight while the pointer moves across it (#4668) (#4669)
The highlight's key hashed the hovered item with its point under the
pointer, so every move across a face built and uploaded its highlight
again: for an imported mesh (one face) all its triangles, every frame.
The key now leaves out a face's and a plane's point, which the highlight
does not draw; an edge's middle stays in (it picks the part lit).

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-22 12:03:33 +00:00
Jackson OurslandandClaude Opus 5.5 981d23d1d2 Viewport: weld a large mesh's shared vertices quicker, and ahead of its first frame (#4679) (#4680)
`SharedTris::new` used the standard SipHash hasher and collected each
triangle's corners into a Vec: 451 ms for a 2 M-triangle STL on the window
thread. A quick hasher for the coordinates' bits and a fixed array make it
278 ms, and the background mesher that meshes an opened or inserted
file's bodies now welds their large meshes too (`warm_shared_tris`), so the
first scene that shows them takes the shared vertices ready-made.

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-22 12:03:28 +00:00
Jackson OurslandandClaude Opus 5.5 01648da72d Ribbon: work out each tab's panel lists once (#4658) (#4659)
`toolbar_custom::panel_lists` is asked for every frame and matched every
registered command against every section by string each time (~337 us a
call for MODEL, several calls a frame). The registry and the ribbon layout
never change while the app runs, so each tab's lists are kept: 0.2 us a call.

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-22 12:03:24 +00:00
Jackson OurslandandClaude Opus 5.5 3d3dd27439 Viewport: leave out placements of an instanced mesh that are out of view (#4646) (#4647)
* claim: #4616

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Viewport: draw a part placed many times from one copy of its triangles (#4616)

A part placed by many occurrences was drawn, framed and picked from a moved
copy of its mesh per placement: on the CPU (the moved mesh and its scene
bytes) and on the GPU (its vertices uploaded once per placement).

- The model scene draws bodies that share a mesh as GPU instances: the
  shared triangles once, a rigid move and colour per placement
  (`InstancedMesh`, `vs_tri_inst`), in the solid, section and AO passes.
  `GpuScene::merged` expands them, so scene tests see world triangles.
- `ModelBody::mesh_in_place`, `plan_mesh_in_place_at`, `mesh_bounds` and
  `display_identity` give the shared mesh, its placement, the exact box and
  an identity without making the moved copy.
- Display refinement's body ids, Fit/Home bounds, the viewport's body boxes,
  the background mesher and picking use them (picking moves the ray into
  the part's frame and shares one pick index).

25 placements of a 2 M-triangle STL on an M2 Max: orbit 45 -> 37 ms a
frame, footprint 41 -> 16 GB, 24 copies 39 -> 18 s.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Viewport: draw large meshes from shared, indexed vertices (#4637)

An instanced mesh's vertices are shared between its triangles and drawn
indexed (`SharedTris`). A flat-faceted mesh (an STL's facets) shares them by
position alone and lights each fragment with its triangle's own plane
(`vs_tri_inst_flat`, `fs_*_flat`), taken from the fragment's position
relative to the eye so it stays exact at any zoom; its vertex outputs are
kept few, since a tiled GPU stores every vertex's outputs. A body alone is
drawn this way from 50 k triangles. A mesh too large for one buffer falls
back to unshared vertices.

`instanced_scene_gpu_benchmark` (manual, ignored): 25 placements of a 2 M-
triangle STL at 3600 x 2190 px, 4x MSAA, M2 Max: 21.3 ms a frame for the
placements' own triangles, 16.1 ms shared and indexed.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Viewport: leave out placements of an instanced mesh that are out of view (#4646)

Each frame `Batches::cull` keeps the placements whose box may be seen
(`placed_box_in_view`: all eight corners past one side of the view in clip
space, so it holds behind the eye too) and writes them again only when
that set changes. The manual benchmark gains `SOLIDCRAFT_BENCH_CLOSE=1`:
close up on the middle of 25 placements of a 2 M-triangle STL (13 in
view), 3600 x 2190 px, 4x MSAA, M2 Max: 28.2 ms a frame for the
placements' own triangles, 17.2 ms instanced and culled.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
v0.19.0-nightly.20261022.67.1
2026-10-22 04:04:59 +00:00
bherbruckandClaude Sonnet 5.5 6c60f1a9ed web-offline-test: hold responses until the test lets them go (#4620)
The slow steps waited on the clock (6 s sleeps, a 1 s timer, a 30 s cap), so on a busy
runner a launch could outlast them and time out at 240 s. The server now holds a response
until the test releases it, and the test waits on events:

- overlapping downloads: build v5's own files are held; files both builds share (index.html,
  names no build changes) are served, since the browser queues a request behind an in-flight
  one for the same URL. The held files are released once v6 has started.
- fail-fast step: the other files wait until the test has seen them asked for.
- update in another tab: the other tab updates once the launch is waiting for build.json, and
  the browser's own sw.js check waits for the same moment.
- hung requests no longer give up after 20 s.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 21:51:01 -04:00
bherbruckandClaude Opus 5.5 5899e5b6c5 Release 0.19.0 (#4603)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 21:13:21 -04:00
bherbruckandClaude Sonnet 5.5 e23a5bf243 Ship 14 more official themes: SolidCraft 95, Platinum 9, Cupertino, phosphor pair, Blueprint, One Dark and a pack of open-source palettes (#4602)
Registers them after the Gruvbox set in the Theme list, adds attribution rows,
and keeps the heading-band ordering check passing by nudging heading/subheading
(and, for High Contrast, dialog) backgrounds.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 21:00:11 -04:00
Nathan Daneandbherbruck 4b23bb3a03 Implement compact workspace layout (#2029) (#4533)
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover

* Vertical history strip: seam handle to expand and collapse names, drag to resize with snap

* Vertical history strip: no empty gap below the transport

* Show the history seam arrow only on hover (#2028)

* claim: #2021

* Redesign the Assistant chat panel with shared UI components

* Show Assistant in the shared floating panel shell

* Extend floating Assistant to viewport height and shift navigation

* Dock Assistant before history and match docking preview bounds

* Align Assistant top margin with floating shell cards

* Extract a shared panel drag grip

* Rebuild responsive history sizing and three-way docking

* Share browser and History collapse hover styling

* Show the History title as soon as its text fits

* Animate stacked browser and History expansion and collapse

* Make panel folding responsive and independent of frame delays

* Let folding panel contents shrink continuously to header height

* Use four explicit History transport actions in every layout

* Resize the shared Browser and History column from either card

* claim: shared compact-mode containers (#2029)

* Centralize layout-aware UI containers and enforce their use

* Keep docked Assistant at the outer edge beside tool sheets

* Use shared surface policy for Assistant tool space

* Let tool sheets drag over shell panels while avoiding Assistant

* Update Parameters drag bounds assertion for shell overlap

* Keep dragged tool sheets below ribbon and workspace selector

* Enforce universal UI containers in mandatory repository checks

* Remove legacy report windows and require shared window composition

* Remove retired UI styling and require shared controls

* claim: compact layout preference (#2029)

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-21 20:52:36 -04:00
bherbruckandClaude Sonnet 5.5 920398ac53 Bring back the view-change glide; orbit, pan and zoom stay instant (#4596)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 20:37:19 -04:00
bherbruckandClaude Opus 5.5 688124937d Chamfer: a cutter that would reach into a nearby wall is not used (#4539)
* Chamfer: a cutter that would reach into a nearby wall is not used

A straight chamfer's cutter reaches several times the chamfer's size out
from its edge, and further on a larger part. On a pin standing in a socket,
that far side lands inside the socket's walls, and the cut took bites out
of them. A cutter whose far side is inside the part is now refused, as one
whose ends are, and the chamfer is built locally instead.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Robustness goldens: seed 9 re-recorded for the chamfer cutter check

A chamfer in seed 9 was refused because its result changed more of the
part than a chamfer can. With its cutter refused, it now builds locally.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 20:05:35 -04:00
github-actions[bot] b49557c294 Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] 2026-10-21 23:54:54 +00:00
dfd58293a6 Navigation: opt-in free orbit and shared Normal to Selection (#1912)
* Navigation: opt-in free orbit and shared Normal to Selection

Preserve the complete reviewed feature, shared camera setting propagation,
rigid pivot behavior and focus/drag regressions from PR #1912.

Consolidate the prior main-integration commits before rebasing, so their
merge-resolution fixes remain in the linear feature history.

* docs: move free orbit help beside viewport controls

* Merge main into fix/solidworks-free-orbit

Camera animation is gone on main, and with it the orbit snap spring: the Shift
snap keeps its unsnapped orbit in orbit_free, which the free-orbit checks now read.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 23:29:29 +00:00
ba4f7864ff Export Current View as DXF includes shown sketches (#3708) (#3780)
* claim: #3708

* Export Current View as DXF includes shown sketches (#3708)

The view export refused a design with only a sketch and left shown
sketches out when bodies were present. It now draws the sketches the
viewport shows (profile curves only: no construction geometry, points,
dimensions or constraints) on a SKETCH layer, one entity per curve.
Finished sketches are hidden behind bodies through the body-edge
occlusion; the active sketch is drawn on top, as in the viewport.
Sketch points use the same projection, budgets and cancellation.

The export is refused only when there is neither a visible body nor a
shown sketch curve; the dialog and the command share that check
(cmd::view_dxf_exportable).

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 23:09:57 +00:00
b289dc2421 Sketch Dimension: name = value defines a user parameter (#2916) (#3638)
* Sketch Dimension: `name = value` defines a user parameter (#2916)

In a dimension's value (the D tool's box, and `sketch.dimension`'s `value`
from scripts, the CLI, MCP and the control channel), `name = expression`
adds the user parameter `name` with that expression and dimensions with
`name`: typing `width = 40` on a line gives a 40 mm user parameter `width`
and a dimension whose expression is `width`. A bare number is read in the
design's unit, as a bare dimension value is; an angle's parameter is in
degrees. The expression may be anything the parameter editor takes.

It is one command: one undo removes the parameter and the dimension
together, and a dimension the sketch refuses leaves no parameter behind.
A taken name is refused with a hint (type the name to use it, or change
it in Parameters), a reserved name with the parameter editor's message,
and a left side that is not a name (`2 = 3`) still fails to parse as
before. A driven dimension defines nothing. The reply carries `defined`,
and the status line names the parameter.

The splitter lives in the doc crate (`expr::definition`) so other value
inputs can take the same form later; editing an existing dimension, the
inline shape boxes and feature dialogs are follow-ups.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Sketch Dimension: say why a name is refused, in the command's own words (#2916)

The dimension editor showed a refused definition raw, in the box and the
status line: "invalid parameters for `sketch.dimension`: value: `mm` is a
unit, constant or function name". It now reads "Sketch Dimension: `mm` is
a unit name, so it cannot be a parameter name": the editor passes the
command's errors through `friendly_error` like every other command, and
drops the `value:` field tag, since the box is the value. The taken-name
hint reads the same way: "Sketch Dimension: there is already a parameter
`w`: type `w` to use it, or change it in Parameters".

A reserved name says what kind of word it is and what that means
(`param_name_problem`, shared with the Parameters dialog): a unit name, a
function name, or a constant, "so it cannot be a parameter name";
`expr::reserved_kind` tells them apart.

`friendly_error` translates the command label with the interface language
(the engine's sentence stays English), so the prefix reads "Wymiar szkicu:"
in Polish.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Sketch Dimension test: keep the third line off the ribbon (#2916)

On current `main` the ribbon floats over the top of the canvas, and the
test's third line at sketch y = 50 projected under it: the click opened
Parameters instead of picking the line. The line now goes below the
first one.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-21 22:57:22 +00:00
2daf22923c Extrude preview: a cut from an empty root is no longer refused (#3085) (#3363)
* claim: #3085

* Extrude preview: a cut from an empty root is not refused (#3085)

A cut or intersect sketched where the active component has no body of
its own (the root of an assembly, or of a design whose part was
imported into a component) takes part in every body (#1234): the
command makes the cut. The Extrude preview checked the targets itself,
looked only in the active component, and showed "there is no body to
cut or intersect" beside a tool going through the part. Pressing OK
still cut, so the dialog said one thing and the model another.

The rule now lives in one place, Session::cut_takes_every_body, which
both the command and the preview ask, so they cannot disagree again.

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 22:37:31 +00:00
bherbruckandClaude Opus 5.5 2fdc105d87 IGES import: separate lumps of one part are separate solids (#3928) (#3972)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 22:26:43 +00:00
95b23f28d6 Rename box: Tab (and leaving the box) keeps the new name (#3313) (#3336)
* claim: #3313

* fix(ui): the Rename box keeps the new name when it loses focus (#3313)

Only Enter committed a rename: Tab (and anything else that moved focus away)
dropped the typed name. Leaving the box now keeps it, as a click elsewhere
already did; Escape still cancels.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-21 22:07:38 +00:00
14b27f323a Dialogs picking a plane show the origin planes in the view (#2581) (#2618)
* claim: #2581

* fix(view): dialogs picking a plane show the origin planes (#2581)

Create Sketch showed the origin planes while it picked its plane; now any dialog
whose active input takes origin planes does (Mirror's plane, Offset Plane,
Midplane, the construct tools), so the plane can be picked in the view.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-21 21:49:18 +00:00
4ab3a85323 Bug report: clarify the form and retain margins on resize (#2244) (#2246)
* claim: #2244

* fix(ui): guide bug reports with a bounded, labelled form

* fix(ui): export bug reports after processing current-frame edits

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 21:49:11 +00:00
c54b711345 CLI: --help prints usage to stdout and exits 0 (#1818) (#1828)
* claim: #1818

* claim: #1818

* fix(cli): --help, -h and help print usage to stdout and exit 0 (#1818)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-21 20:39:30 +00:00
Mauznemo 84ec512d7a fix: midpoint tool rejects two lines (#3836) 2026-10-21 20:36:29 +00:00
github-actions[bot] 17ece2edc0 Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] 2026-10-21 20:28:26 +00:00
Nathan Dane 63f210b49f Restyle the vertical history sidebar (#2028) (#3953)
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover

* Vertical history strip: seam handle to expand and collapse names, drag to resize with snap

* Vertical history strip: no empty gap below the transport

* Show the history seam arrow only on hover (#2028)

* Extract a shared panel drag grip

* Rebuild responsive history sizing and three-way docking

* Share browser and History collapse hover styling

* Show the History title as soon as its text fits

* Animate stacked browser and History expansion and collapse

* Make panel folding responsive and independent of frame delays

* Let folding panel contents shrink continuously to header height

* Use four explicit History transport actions in every layout

* Resize the shared Browser and History column from either card
2026-10-21 18:56:55 +00:00
raykholo 9acff62422 Sketch trim and extend refuse an offset's ends instead of undoing silently (#3918)
An offset's output curves have their ends recomputed from the source
curves on every solve. Trimming a piece off one reported success and left
the curve whole, because the refresh pulled the new end straight back.
Extending one was refused as "connected to other geometry", which does not
say why. Both now refuse with the reason and the way out: edit the source
curves, or break the offset association first. Trimming away a whole
offset curve, which removes it from its association, still works.
2026-10-21 18:56:53 +00:00
915ee8a178 Fuzzer: a chamfer may add material, as a fillet may (#3868)
The fuzzer chamfers randomly picked edges and expected every chamfer to
shrink the body, so a chamfer of a concave edge, which fills the corner,
was reported as a wrong volume: 53 of the 6,000 designs of a run (seed
7100465: a box, a shell, a chamfer of an inside edge). Fillets already
expect any volume change for the same reason; chamfers now do too.

The regression test checks both directions on a shelled 20 mm box (an
inside-edge chamfer of 1 mm adds 8 mm³, an outside one takes 10 mm³
away) and that seed 7100465 is no longer a volume finding.

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 18:56:51 +00:00
ac1768e08b Center circle through a snapped point stays on it (#3099) (#3277)
* claim: #3099

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Centre circle: a second click snapped to a point keeps the circle on it (#3099)

The tool sent the centre's snap reference but only a radius for the
second click, so a circle drawn from a line's midpoint through its end
was left free to change size. sketch.circle.center takes through: a point
reference, kept on the circle (PointOnCurve), and the tool passes it when
its second click snapped to a point.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 18:56:43 +00:00
e1daf0a8b6 Clicking a parameter suggestion inserts it (#3257) (#3260)
* claim: #3257

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Clicking a parameter suggestion inserts it (#3257)

A press on a suggestion took the focus from the expression box before
the list could see the click: the list stopped drawing, the click never
landed, and the box gave up what was typed. The rows are kept from the
frame before; a press on one picks it and gives the box its focus back
(again on the release, which the box takes as a click away). The rows
are no longer focusable. The completion tests' frames now drop their
texture updates on purpose, so they run where egui checks that.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 18:56:41 +00:00
57c3e94df6 Parameters: a new parameter's expression starts blank, and Tab selects a field (#2919) (#3096)
* claim: #2919

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Parameters: a new parameter's expression starts blank, and Tab selects a box of the add row (#2919)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Parameters tests: the add row's blank expression in the manage dialog tests (#2919)

The two inventory tests typed a name and pressed Enter, counting on the
10 mm the expression used to start with; they now type it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 18:56:39 +00:00
amolinari-autotex 5e05d925e0 Tapped Hole: keep Custom selection and edit nominal diameter (#2440) (#2441)
* claim: #2440

* feat: choose ISO metric tapped-hole sizes and derive the drill diameter

* fix: label the tap drill and hide the unused diameter editor

* test: cover tapped hole catalogue and drill sizing

* fix: omit coarse metric pitch from generated designations

* Keep custom tapped-hole nominal diameter and pitch editable

Preserve Custom as dialog state, derive the existing metric designation from numeric inputs, and refuse invalid drafts without applying the last valid size. Retain manual text editing, physical tap-drill geometry and saved-design compatibility.

* fix(i18n): register custom tapped hole labels in source catalogs

* Adapt tapped-hole Custom fields to the current form kit

* fix: preserve tapped designation focus with dynamic custom rows
2026-10-21 18:56:38 +00:00
NOWN-DEVandClaude Opus 5.5 50313d147f solid.mirror: copies join their source's component; follow the saved placement (#1938)
* solid.mirror: copies join their source's component; follow the saved placement

Three follow-ups to mirroring bodies of placed components:

- A copy joins the component of the body it mirrors (or, when that
  component is placed more than once and a copy there would show at
  every placement, the innermost component around it placed once), so
  checks that group bodies by component see it beside its source.
- The saved placement path, not the body's name, says which component
  a mirrored body is in: inserting the same file again reuses the body
  names, and the copies of the first insert vanished.
- The mirror is evaluated again only when its own placements or its
  component's frame change, not on every occurrence move: each later
  command paid for one more mirror evaluation.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* solid.mirror: a saved placement must still lead to the body's component

A stale or edited placement path that leads to another component's
occurrence mirrored the body silently where that other component is
placed. The mirror now reports that the placement no longer exists.

The body's component comes from the evaluated body where a transfer
recorded it, else from the component its name is recorded in or its
feature's. When a later insert of the same file has taken over the name
(the recorded component lies outside the components the body's own
feature made), the placement has to lie inside those components instead,
so mirrors of the first insert keep working.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* solid.mirror: the copies' component change is a pending format change

v26 shipped in 0.15.0, so its mirror-placements note stays as released;
the change of where a Mirror with placements puts its copies is noted in
a new pending file instead.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 18:56:36 +00:00
bherbruckandClaude Opus 5.5 728f753b80 Release 0.18.4 (#4362)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 11:30:18 -04:00
f22a026c27 3D mouse: choose which motion drives each axis (#2782)
* 3D mouse calibration: find each axis from a guided recording (#1463)

A recording of the cap at rest and moved along each axis both ways gives which raw axis is which,
which way it runs, where it rests, how much it wanders at rest and how far it goes each way.
Hands aren't exact: on our SpaceMouse Pro, sliding the cap right moved Ry further than X. So each
raw axis is picked by the one-to-one assignment that best explains all six motions together, each
raw axis scored against its own range so a wider one doesn't win through cross-talk. Each
direction is scaled on its own, so a device that goes further one way still reaches full scale
both ways; a direction under a twelfth of the furthest axis counts as not having responded.

A small state machine walks the user through it and moves on by itself once the cap has been held
out for 0.4 s in one go and let go. "Held out" is the least the solver accepts, twice an axis's own
rest wander, so whatever the solver would accept can be recorded and a noisy axis doesn't hold up a
quiet one.

A calibration also carries a dead zone the user sets, a share of full deflection taken off the
bottom of the travel, with full deflection still reading full scale.

Serde support is behind an optional feature, so the crate still needs nothing by default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse calibration in Preferences, saved per device (#1463)

Preferences > Navigation gets a 3D mouse calibration row: whether the device being read is
calibrated, Calibrate... and Forget calibration. The window asks for each motion in turn and
saves what it found under the device (hid, web, spacenavd or 3dxware, with vendor and product ids), so
switching devices or turning spacenavd on doesn't apply the wrong mapping. A calibration is saved
for the device it started with, and ends if another one is read instead.

navigate_frame puts the reading through the device's calibration before the driver mapping, so
the per-axis Invert and speed and everything after them are unchanged. While the window is open
the reading goes to it and the view stays put; it closes with Preferences. Restore Defaults on
the Navigation page keeps calibrations, since they describe the device.

The web app hands over the gamepad's readings as they are, so calibration sees where the cap
rests; navigate_frame now leaves a reading inside the dead zone alone after calibration, so a
cap resting just off zero still doesn't keep redrawing. Whether the cap is moving is asked of the
calibrated reading there, in the web page's idle waker and in both wheel filters. Those run before
the frame, so they keep the last frame's calibration with its device and use it only for that
device. On the desktop, an axis with nothing fresh (timed out, or not reported since the device
connected) reads as the device's calibrated rest, so a device resting off zero doesn't drift.

A saved calibration that can't be read or used (a hand edit) is dropped on its own when the
preferences load, with a log line.

The window shows the device's raw readings live and has a dead zone slider, a share of full
travel on top of the measured noise; it's saved with the calibration and adjustable in Preferences
afterwards.

New strings are in all 14 catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: choose which motion drives each axis (#1463)

After calibrating, which motion of the cap should drive which view axis is partly a matter of
taste: rolling and twisting swapped, say, or Y and Z. Each axis row in Preferences > Navigation
now has a "driven by" choice next to Invert and speed. Picking a motion another axis uses swaps
the two, so each motion always drives exactly one axis, and Reset axes puts them back.

The choice applies after the device's calibration and before the driver mapping, so Invert and
speed stay with the view axis rather than moving with the motion. It's a preference, not part
of a device's calibration, and stays in force when recalibrating; the calibration window says
so while one is set. A saved assignment that doesn't drive each axis once loads as the default.

New strings are in all 14 catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: axis choice review follow-ups (#1463)

- An axis's speed, like its Invert, stays with the view axis when a motion is reassigned; tested.
- Calibrating records the device's own reading, before the axis choice, so a saved swap isn't
  baked into a new calibration and then applied twice; tested through a whole calibration.
- A settings file without the axis choice, or with one of the wrong length, loads with the
  default and keeps every other setting; tested.
- Each axis row says "driven by" in sight before its choice, which otherwise only explained
  itself on hover (no help on a touchscreen or the web).
- "Reset axes" is now "Reset axis assignment", so it doesn't read as forgetting the
  calibration just below it; the "driven by" tip reads more clearly in English.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: name axis rows by what they do, and motions without a device in mind (#1463)

The axis rows and the "driven by" choices showed the same names, "Push left / right" and so
on, which read as one thing mapped to itself, and they described a cap that springs back to
centre, which a trackball or a knob that stays put isn't.

Each row is now named for what it does to the view: Pan left / right, Zoom, Pan up / down,
Orbit up / down, Orbit left / right or Roll, or Off. The name comes from the driver mapping
navigation used last frame, so it stays right where the mapping swaps axes (object mode swaps
the last two). Before navigation has run there's no mapping to read, and a row is named for
its own motion instead of a guessed effect. The choices are the device's calibrated motions:
Translation X / Y / Z and Rotation X / Y / Z, under a header row, and the calibration window
names a motion that barely moved the same way. This renames #1814's existing rows, which had
no translations; every new name is in all 14 catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: rows never fall back to a motion name (#1463)

Without a driver mapping, a row was named for its own calibrated motion,
which is also what its dropdown lists. It now takes the default mapping's
view axis, so the two sides never share a name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: grey out Invert and speed on rows the driver turns off (#1463)

A row the driver profile turns off says so on hover, and its Invert and
speed are greyed out, since they do nothing there. Its motion choice stays
live so a motion can still be swapped out. The column header is shorter.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: unmapped rows say Axis 1-6, and the off-row tip explains the swap (#1463)

Without a driver mapping, a row is now just "Axis n" rather than the
default mapping's view axis, which would be a guess there. The tip on a row
the driver turns off says that a motion swapped into it stops moving the
view, and a test swaps one in and back out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse calibration: a device that stops short of rest after a release (#2778)

Through spacenavd, a relative-axis device like the Space Navigator never
reports its return to zero, so the reading stays at its last small report
after every release. The wizard never saw the cap let go, and once
calibrated, the stuck value crept the view.

A reading that stays exactly the same, close to rest, now counts as let go,
and where the cap settled after each step goes into the calibration: such a
device rests at the middle of where it settled, with a dead zone out to the
furthest of them. A device that comes back to rest calibrates as before.

* 3D mouse calibration: a steady hold through spacenavd stays a hold (#2778)

* 3D mouse calibration: stopping short of rest only counts from spacenavd and 3DxWare (#2778)

Recentring on where the cap settled kept the rest stage's wander radius but
not its offset, so a rest extreme could fall outside the dead zone; the
radius now grows by how far the centre moved. A reading that stops changing
close to rest only ends a step from a source that sends nothing at rest, so
HID and web devices calibrate exactly as before.

* 3D mouse calibration: settling off-centre counts on any device (#2778)

A drifting stick settles off its rest after a release just as spacenavd's
stuck reading does, but it keeps reporting, noisily. A step now ends once
the reading stays steady, each raw axis within twice its rest wander (so
exactly still from a silent source), close to rest, on any device. The
dead zone takes that wander on top of the furthest settle point.

* 3D mouse calibration: steadiness by the run's spread, settled on the step's own axis (#2778)

An axis that read flat at rest may dither once off-centre, so steady
readings may spread at least 2 units and a 50th of the furthest any step
went. Steadiness is the spread of the whole run, not distance from its
first reading. Close to rest is judged on the axis that set the step's
peak, since a device's axes may have different ranges, and the settle point
is the middle of the steady run.

* 3D mouse calibration: readings close to rest never count as held (#2778)

* 3D mouse calibration: the dead zone reaches every reading of each release (#2778)

Saving one reading of each release and padding it by the rest wander could
miss a reading seen in the same steady run. Each release now keeps the whole
run, and the dead zone is centred on and reaches everything read at rest
and after the releases.

* 3D mouse calibration: settle for half a second before a step counts as let go (#2778)

A hand held still close to rest is less likely to end a step early; a
device that comes back to rest never waits for it.

* 3D mouse calibration: show the dead zones as a game controller tester would (#2778)

Once calibrated, the window, and Preferences under the Dead zone slider,
show three pads: slide, press and twist, and tilt. Each has a circle for
the full travel, the dead zone shaded inside it with each direction its
own size and the user's dead zone on top, and a dot where the cap is now,
lit once the view moves.

* 3D mouse calibration: settle through cross-talk, per-axis steadiness floor (#2778)

The axis that went furthest in a step needn't be the one asked for:
cross-talk can move another raw axis further. A step now counts as let go
once the furthest axis is at least halfway back and some axis that moved
about as far is within a quarter of its own peak; a hand still holding the
push keeps the furthest axis out. The steadiness floor follows each axis's
own reach, and each stage's steadiness starts with its own readings.

* 3D mouse calibration: steady readings may dither ±2 on any axis (#2778)

* space-mouse: make the settle check's near band match the steadiness spread, test the 4-unit floor

near() measured distance from the settled run's middle against the whole tolerance,
so it accepted twice the band the steadiness check does. Use half. Add a short-range
test where only the .max(4.0) floor lets a +-2 dither settle, and one where dither
the spread check rejects is also not skipped as untouched.

* space-mouse: settle on the middle of the steady run so a lopsided dither isnt movement

near() allows half the steadiness spread around the settled point, but the point was the run mean. A dither that is mostly one value with an occasional far one (10, 10, 10, 14) is steady, yet the far reading sat 3 from the mean and started a hold in the next step. Use the middle of the run range instead.

Adds a lopsided-dither test and a test pinning the documented cross-talk limit ([100,300] then [5,90] stays open).

* Judge an untouched cap by the settled run's spread, not a rounded midpoint

Rounding the midpoint to i16 could leave one end of an odd-width run more
than half the tolerance away, so the cap read as touched while sitting at
the end of the run it settled on. Keep the run itself and ask whether one
more reading keeps its spread within tolerance.

* space-mouse: pin the wider skip band of a narrow settled run and a single-reading settle

* space-mouse: keep a step held while a lesser axis stays out as the larger one relaxes

Settling needed one axis furthest and returned, and one axis about as far and settled, which a single relaxed cross-talk axis satisfied alone. Every axis that moved at least half as far as the furthest now has to be back by RETURNED_SHARE of its own peak too.

* 3D mouse: the calibration tests run in a focused window, as the focus check now requires

* 3D mouse: the axis tests run in a focused window, as the focus check now requires

* 3D mouse: the calibrated-rest test runs in a focused window, as the focus check now requires

* Settle a spacenavd reading that is nearly at rest (#3523)

spacenavd sends a record only when the values change and nothing when the cap springs back, so the last small leftover of a release was held forever and the view kept drifting.

A held reading now reads as rest once every axis is within 150 raw units of the device rest and no record has arrived for 0.5 s. A firmer push stays as long as it lasts, and so does a small value next to a large one. 150 is the smallest round number above the worst leftover in the issue (129 on one axis).

* Choose which 3D mouse driver to read on Linux

When both spacenavd and the device itself (hidraw) are there, Preferences now has a "3D mouse driver" choice: Automatic, spacenavd or Direct. Automatic is what it always was, spacenavd when it runs and the device otherwise, so nobody's setup changes. If the chosen one isn't available the other is read and the log says so once. Each driver keeps its own calibration, as before.

To switch without a restart both reads now wake up when idle and look at the choice: spacenavd with a 250 ms read timeout, hidraw opened non-blocking and polled every 5 ms when it has nothing. A record that arrives is read as before, and one split across a timeout is kept. The reader also publishes which of the two exist, which is what shows the combo box; with only one it says which one is in use.

* Build the 3D mouse row header from existing labels

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-21 11:29:33 -04:00
bherbruckandClaude Sonnet 5.5 4b37c046e4 Sketch tools come back in the variant used last (#4308)
* Sketch tools come back in the variant used last, and it is kept in preferences

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Scenario: a new design keeps the remembered sketch variant

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 11:22:04 -04:00
bherbruckandClaude Sonnet 5.5 54072b7014 Start page: sample pictures and the existence check of recent files run off the window thread (#4349)
A sample picked before its picture arrives still opens; the language test waits for the file check.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 11:20:12 -04:00
bherbruckandClaude Sonnet 5.5 cb3cabeda1 Remove camera animation: every view change and orbit applies at once (#4296)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 11:19:40 -04:00
bherbruckandClaude Opus 5.5 775e5155bb Main green: revert the start page change (#4295) and fix the format 28 test (#4335)
* Revert "Start page: sample pictures and the existence check of recent files run off the window thread (#4295)"

This reverts commit d9059d8da5.

* Test: an older design is marked format 28 now that 0.18.3 folded face pieces into 29

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 10:52:08 -04:00
bherbruckandClaude Sonnet 5.5 e570c0b4eb Windows: a restored window that is out of reach is fitted to the monitor's work area (#4299)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 09:36:36 -04:00
bherbruckandClaude Sonnet 5.5 d9059d8da5 Start page: sample pictures and the existence check of recent files run off the window thread (#4295)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 09:36:27 -04:00
bherbruckandClaude Sonnet 5.5 463cea0615 Windows: ask for the foreground once, when the first frame is on screen (#4284)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 09:17:10 -04:00
bherbruckandClaude Sonnet 5.5 0225e4d2a5 Startup: the first frame no longer waits for the system CJK/Hangul/Thai font search; SOLIDCRAFT_PROFILE_STARTUP prints startup steps (#4283)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 09:17:02 -04:00
bherbruckandClaude Opus 5.5 034aa60d47 Release 0.18.3 (#4270)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 08:46:14 -04:00
bherbruckandClaude Opus 5.5 971b223246 Thread: turn a shaft thicker than a modelled thread down to its major diameter (#4256)
* Thread: turn a shaft thicker than a modelled thread down to its major diameter

A modelled external thread on a shaft thicker than the thread no longer refuses: the shaft
is turned down to the major diameter over the threaded length (run past a free end of the
face), then the thread is cut as before. The turned face is named F<n>:turned and the step
it leaves F<n>:shoulder:start/end. A shaft the part goes on around is refused rather than
cut into, shafts under the minor diameter and cosmetic threads on thicker shafts are still
refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Thread preview test: an 8 mm shaft is turned down for M6; M10 still refused

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 08:27:18 -04:00
bherbruckandClaude Opus 5.5 8c861f9f46 Face names: pieces of a split face keep their numbers across evaluations (#3902) (#3991)
* Face names: pieces of a split face keep their numbers across evaluations (#3902)

Pieces sharing a name were numbered in the kernel's order, or by the index of the operand face
they came from. A boolean can list its result's faces in another order on the next evaluation,
and an operand made by one (a closed sweep tool) carries that order into the indices, so the
#1/#2 of a split face could swap between two evaluations of the same design. Pieces that
nothing else tells apart are now numbered along the spread of their centres (as edge pieces
already were), and pieces from different faces of one operand by kind, then by place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Face names: older designs keep the piece numbers they were saved with

Numbering pieces by place renumbers split faces in many existing designs, and a stored name
matched exactly would then land on the other piece. Features of a design saved before this
change are marked `kernel_piece_order` by a pending format step and number their pieces as
before; features added afterwards number by place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 08:08:08 -04:00
bherbruckandClaude Sonnet 5.5 e04a016e7c Align takes planes and the origin (#4248)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 08:06:32 -04:00
93a2922c5e Display plans and the model cache for large STEP assemblies (#2814) (#4021)
* STEP import: mesh band faces that wrap around a closed surface correctly

Fixes two related bugs that caused SolidCraft to fail to mesh a face wrapping
all the way around a closed, non-periodic surface (a revolved ridge band, or a
tube-shaped B-spline surface): a missing face, a folded/self-overlapping
triangulation, or a hole in the rendered body.

1. Ring edges that run slightly off their surface. STEP files write a surface
   and the curves bounding it to the file's own declared uncertainty, so a
   ring edge can legitimately sit a few micrometres off the surface it
   bounds. The code finding where a ring edge crosses the planned split line
   compared against the edge's raw (off-surface) point using a hardcoded
   tolerance far stricter than the file's own precision, rejecting a valid
   cut. Now matches against the point on the surface directly below the ring
   crossing, respecting the file's declared tolerance.

2. Closed B-spline surfaces, their slits and their slivers. truck only treats
   the rotation of a revolved surface as periodic; a face on a B-spline
   surface whose control net closes on itself (a tube) wasn't recognized as
   wrapping around at all. This produced a folded face, a hole (a boundary
   loop landing a full period away from where it should cut), and one
   near-zero-width sliver face costing the entire body its tessellation
   plan. Adds periodicity detection for closed B-spline surfaces, period-
   aware hole-loop alignment, dropping of zero-width slit boundaries, and
   isolating a too-thin-to-triangulate face so it no longer takes the rest
   of the body down with it. The GPU shader's periodic wrap mirrors the CPU
   math so the two don't drift apart.

Regression tests: band_faces_split_when_ring_edges_run_off_their_surface,
band_face_with_a_zero_width_slit_is_still_meshed,
a_sliver_face_too_thin_to_triangulate_does_not_cost_the_body_its_plan.
Ablation-tested: disabling either mechanism in (2) reproduces its target
test's original failure message while leaving the other test unaffected.

* STEP import: mesh the band's split faces, not just split them

jyviko asked whether a band wall missing from the interactive app's render
was a shading issue or a genuinely missing face. It was missing: the ring-
edge split fix made the band's topology correct, but plan_face still
produced zero triangles for the two new sub-faces.

Two causes, both in plan_face (crates/kernel/src/tess/mod.rs):

1. The tolerance for how far an imported boundary may lie off its surface
   was tied to the requested mesh's chord tolerance instead of to the
   body's own size. A finer display tolerance could then reject a boundary
   a coarser one had just accepted, so the face would drop out exactly when
   zooming in on it.

2. Near a sharp corner of this flat-panelled band, several boundary points
   that are legitimately a few micrometres apart (within the STEP file's
   own declared precision) all projected onto the same surface point. The
   boundary loop then repeated a point in (u, v), which a triangulator
   can't follow, so the face's plan failed outright. One face without a
   plan costs the whole body its plan, and the fallback mesher can't
   handle a closed B-spline surface either, leaving both halves of the
   split band with no triangles at all: present in the topology, invisible
   in every renderer, and absent from the body's volume.

Fix: scale the off-surface tolerance to the body's own extent (new
Rules::extent), and collapse a run of boundary nodes that land on the same
surface point to one (drop_collapsed) before triangulating.

Regression test additions to band_faces_split_when_ring_edges_run_off_their_surface:
the body's volume now matches the analytic pentagon prism (was a third of
it - only the top cap - before this fix); display_plan leaves no face
without triangles from coarse to fine tolerance; and the actual tolerance
and facet angle the viewport draws with gives the split band its full
lateral area on both halves.

Confirmed on review_band_big.step, the fixture behind the review screenshots:
volume's relative error against the analytic pentagon prism drops from
1.4e-4 to 4.1e-6, and the band wall now occludes the floor grid behind it
in a snapshot the same way the top and bottom caps always did.

Full kernel suite: 739 tests, 0 failed.

* STEP import: hold an imported boundary to the file's own tolerance, not the part's size

jyviko: the off-surface acceptance added in the last commit
(rules.extent * OFF_SURFACE) scaled with the part, so a 2 m part
silently accepted a boundary 2 mm off its surface while a 20 mm copy
of the same part accepted only 0.02 mm. A STEP file's own declared
uncertainty does not grow with the part, so the bound shouldn't either.

Body gains boundary_tol: Option<f64>, Some(file's declared tolerance)
for a body read from STEP (crate::step_in::Units::tol, already used
by the ring-split fix in split.rs), None for anything this kernel
built. It's set before the import's own unmeshed-face check runs, and
carried over by the two face-split operations that re-cut an imported
surface (splitface.rs, outline.rs), since the file's uncertainty still
describes those boundaries afterward.

plan_face's accept now reads: the file's own tolerance when the body
declares one, or the old chord-tolerance/extent bound otherwise. The
old bound's tol * 10.0 term had to go too, not just the extent term:
at a 2 m part's typical display tolerance that term alone is ~20 mm,
nearly ten times the extent bound jyviko objected to, so keeping it
would have left the exact 2 m/2 mm example still silently accepted.

Two new tests in step_in/tests.rs:
- band_faces_split_when_a_scaled_copy_runs_off_its_surface: the same
  band fixture at a realistic 2 m scale with the same absolute slop
  and declared uncertainty as the small one, meshes the same way at
  every chord tolerance from coarse to fine.
- off_surface_budget_follows_the_file_not_the_part_size: the actual
  regression. The same off-surface error is accepted or refused the
  same way whether the part is 20 mm or 2 m; a 2 mm error against a
  1 µm declared uncertainty is refused at both sizes now (accepted at
  2 m under the old bound, refused at 20 mm - that asymmetry was the
  bug). Checked at both a coarse and a fine display tolerance.

Known gap, not fixed here: a STEP-imported body saved into a
.solidcraft design and reopened loses boundary_tol (native.rs's
decoder has no field to read it from) and falls back to the old
extent-based bound on reload. Today's design format has no concept of
this value at all; persisting it is a real format change, out of
scope for this fix.

Full kernel suite: 776 tests, 0 failed. clippy -D warnings clean.

* Display plans for STEP threads and pointed ends (#3847)

Three faces cost a threaded or pointed STEP part its whole display plan, so it
was drawn from the reference mesh: cracked, faceted, and never refined up close.

- A loop through a pole (a cone's apex on the boundary) seemed to wind around
  the surface: the jump at the apex, unwrapped to the nearest copy, was
  arbitrary. The loop is turned to end where it leaves the pole, so the step
  that closes it is an ordinary one (`seam::close_through_pole`).
- Projection onto a spline with hundreds of spans (a helical flank) restarted
  from a 16 x 16 grid and settled on another turn; it now starts from two
  points per span, capped.
- Sag refinement no longer inserts a point exactly on a boundary side, which
  split the side and failed the face.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* tess: a refused face's edges are divided finer and it is planned again (#2814)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* tess: sliver faces plan empty; a face no method plans is filled flat from its nodes (#2814)

A face whose boundary runs out and back along itself (two edges between the
same vertices, a rounding apart, as STEP files write slivers) encloses nothing
and is planned with no triangles. A face still refused after its edges are
divided finer (a cusp, a sliver whose sides sag across each other, a small cap
at a pole) is filled flat from its shared boundary nodes, so the rest of the
body keeps its display plan instead of falling back to the reference mesh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* display mesh tests: a rim the chord tolerance leaves a line is divided again (#2814)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* portable B-rep: up to 8192 control points along a spline direction (#2814)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* solidcraft-cli: --debug logs what the engine reports to stderr

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* STEP import: a spline written over a tiny parameter range is read over one (#2814)

Some writers parameterize splines over a few millionths (a humanoid robot's
edges span 5.4e-6). The kernel tells parameters apart only to 1e-6, so over
such a range it evaluated the curve's end wrongly, and trimming an edge to its
vertices dropped a control point: the bodies could not be stored exactly and
the whole model cache was left out of the design. The knots are now stretched
to span one; the curve is the same and edges are trimmed by their vertices, so
nothing read from the file refers to the old parameters.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* model cache: a body keeps its file's declared accuracy (#2814)

A body restored from the cache dropped the accuracy the file it was read from
declares, so the planner held its boundaries to the kernel's own bound and a
reopened design drew differently from the import. It is stored with the body's
runtime values, and only when there is one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* tess: a boundary within a hundredth of its body lies on its surface, at every quality (#2814)

#1721 held a body read from a file to the accuracy the file declares. A writer
declares what it aims for, not a bound its edges keep: a 251-body robot
assembly declaring 0.01 µm has boundaries 10 to 30 µm off their surfaces, and
95 of its bodies lost their display plans. The bound is a hundredth of the
body again, what Normal quality always allowed, and now the same at every
quality, so zooming in still never drops a face (#1721's point). A file
declaring more raises it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* STEP import: keep faces whose edge vertices sit slightly off their curves

Some exporters write an edge's vertex beside the end of its curve, further off
than the accuracy the file declares (a surface export declares
0.01 mm and puts a vertex 0.19 mm off two spline ends). The reader refused
such edges and left the face, and with single-face bodies the body, out.

A vertex may now sit up to the file's tolerance or 1/1000 of the model's size
(the diagonal around its VERTEX_POINTs), whichever is larger, never more than
the existing 1 mm ceiling. Spline and open-conic edges have the end control
point moved onto the vertex, so every such edge meets its vertices exactly.
The file's declared accuracy still governs closed-curve, seam and circle
checks.

* tess, io: review clean-ups (#2814)

- A sliver face is one whose loops are all slit: drop_slits finds it in the
  retry after a failed plan, so the pre-check on every face (folded) is gone.
- The flat fill uses cdt::triangulate (a lenient fill that leaves out sides
  crossing one already kept) and its flood-fill inside test, and the plane
  from geom::Plane.
- Refinement only builds its indexes when a face was refused, takes the
  faces to plan again from edge_faces, and re-samples edges on the pool;
  Rules::finer for the finer rules.
- One PackageWriter::fits for the model cache, the preview and the thumbnail.
- The band split's ring tolerance lives in split.rs; comments say what the
  off-surface bound is now.
- The CLI logger prints Level::as_str().

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: David Lackovic <lackovicdavid1234@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Ray <raykholo@users.noreply.github.com>
2026-10-21 10:37:12 +00:00
ff8b09c225 Kernel paused: label new kernel issues, PRs and discussions for a maintainer to answer (#3994)
While a new geometry kernel is evaluated, a workflow labels new issues, pull
requests and discussions about kernel work kernel-paused, so a maintainer finds
them and answers in person. A pull request counts when it changes
crates/kernel/ or vendor/truck*, anything else when its title names a kernel
operation. Crash and data-loss reports and anyone who can push are left alone.
CONTRIBUTING.md says so.


Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 10:03:47 +00:00
raykholo 975a08c992 ui-egui tests: hold OK's evaluation where a test checks it is computing (#4040)
Two OK-off-the-window-thread tests checked that OK was computing right
after Enter without holding the evaluation. The preview's evaluation is in
the cache, so the worker was usually in before OK's zero wait was over and
OK applied at once: cancel_while_computing_applies_nothing failed in most
runs (5 of 5 in a debug build, 4 of 5 with the ci profile). Both now hold
the evaluation with the test gate, as their neighbour does, and let it go
once the computing state is checked.
2026-10-21 09:38:14 +00:00
bherbruckandClaude Sonnet 5.5 55587f4ac4 View keys: a held arrow turns the view at a steady rate, one tween at most (#4090)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
v0.18.2-nightly.20261021.63.1
2026-10-21 04:22:26 -04:00
bherbruckandClaude Opus 5.5 e94900933d IGES import: close small gaps between trim pieces (#3845) (#3846)
Consecutive pieces of a trim loop can miss each other by micrometres to a tenth of a
millimetre, past the file's resolution, so the loop did not close and the face was
dropped. Faces are now read first and sewn after: each small gap's ends, and the other
piece ends at them, move to one vertex. Gaps over 0.1 mm or not small next to their
pieces stay open; the sewing tolerance stays the file's. The stated accuracy covers how
far a vertex moved, so the STEP reader keeps those edges.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 02:20:02 +00:00