65b02ff7ab28eb60055ecd5e501ced94de8b1765
199
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
dc8b5489fc |
Wave 257/509: Main's new callers of the placing calls that now return their error (and 1 more)
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop. - |
||
|
|
8b3eedd0aa |
Wave 211/509: doc, engine, ui: placing the model returns its error; placements are checked where they are set
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
-
|
||
|
|
2d629069c6 |
Dialogs: OK and Cancel at the top (#6708) (#6713)
* claim: #6708 * feat(dialogs): OK and Cancel at the top (#6708) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
f1cc49bcdb |
History: list a sketch under the feature built from it (#6489) (#6494)
* claim: #6489 * feat(history): list a sketch under the feature built from it (#6489) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
5622963b91 |
Insert SVG / DXF: place, size and turn the drawing before it is added (#2605, #3443) (#3542)
* claim: #2605 * Insert SVG / DXF: place and scale the drawing before it is added (#2605, #3443) After the file is picked, an Insert SVG (or DXF) window sets the drawing's X, Y offset and scale, with a live preview; OK adds it in one step and Cancel adds nothing. The insert commands already took `at` and `scale`; the window is what was missing. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Insert scenario: the picked drawing goes through the placement window (#2605) `sketch_toolbar_imports_use_file_picker` expected the SVG added as soon as it was picked; it now checks the placement window first and adds it with OK. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Insert SVG / DXF: a size in millimetres, an angle, and placement by the drawing's centre sketch.insert_svg and sketch.insert_dxf take width or height (mm, aspect kept, winning over scale), angle (degrees) and align (origin or center). The new sketch.drawing_bounds reads a file's own size without inserting it. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Insert SVG / DXF window: Width, Height and Angle, placed by the drawing's middle Width and Height in millimetres follow the scale (aspect kept); Angle turns the drawing about its middle, where X and Y now put it. Uses sketch.drawing_bounds for its own size. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Insert SVG / DXF: handles in the viewport to scale, move and turn the drawing The preview gets its box with a handle at each corner (scales about the opposite corner, aspect kept), the box itself (moves) and a knob above it (turns, Shift snaps to 15 degrees). They edit the same X, Y, Scale and Angle the window shows. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Insert handles: the move that comes with the release counts A quick drag could stop short of the pointer's last position because the final move arrives in the same frame as the release. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Insert SVG / DXF: the Drawing Size command's label in the catalogs `sketch.drawing_bounds` came without a catalog entry, which the i18n test requires (and the complete ja and zh catalogs with it). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Move the new messages to a pending locale file Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Phanoob <phanoob@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
97cce94a1c |
Agent chat: tool calls read as summaries, raw JSON behind Details (#1457) (#6245)
* claim: #1457 * Agent chat: tool calls read as summaries, raw JSON behind Details (#1457) Each tool-call card now says what the call did, built from the command's translated label, its main parameters (lengths in the design's units) and the bodies the result names: "Extrude Sketch1 by 10 mm", "Box 40 x 30 x 20 mm, then Fillet 4 edges (r 4 mm)", "Measured Block: ...", "Saved block.solidcraft". Calls it can't put in words keep the agent's title. The raw arguments (now kept from the in-app client and ACP's rawInput) and the result sit under a folded "Details". Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Agent chat cards: show file names, never paths; temp files not named ui.screenshot reads "Screenshot"; save/export/open and other tools' titles show only the file name. The full text stays under Details and in the tooltip. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
7556e23fe7 |
Reuse existing tabs when reopening saved designs (#2413) (#2414)
* claim: #2413 * Reuse existing model tabs when reopening saved designs (#2413) * Expect Open Recent to reuse the existing design tab (#2413) * Update tab-reuse regression for session visibility |
||
|
|
82cd5cc52e |
Sketch Dimension: value box in the document's units (#3812) (#3878)
* claim: #3812 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 * Sketch Dimension: value box in the design's units (#3812) A dimension added without a value restated what it measured as "<value> mm", whatever the design's units. In an inch design the Dimension tool's value box therefore opened at "25.4 mm" next to a dimension whose text read 1.000 (inches). Document::design_length writes a measured length in the design's units ("1 in"), with enough decimals to keep it to the micrometre, so a dimension that restates the geometry still moves nothing. The Dimension tool, AutoConstrain's dimensions and Toggle Driven (making a driven dimension driving) use it. Millimetre designs are unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 * Move the design-units dimension tests into sketch_ux_tests (review) The #3812 tests go in the existing sketch dimension test file rather than a new file of their own (AGENTS.md, #3226). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
4a0d519727 |
View: OK and Cancel in the corner of the view while a dialog or sketch is open (#6709) (#6714)
* claim: #6709 * feat(view): OK and Cancel in the corner of the view while a dialog or sketch is open (#6709) |
||
|
|
ff2ca2d462 |
Keep focus when correcting an invalid parameter name (#3965) (#4000)
* claim: #3965 * Parameters: a click can correct an invalid name (#3965) Refusing the new row was putting focus back on the field being left, so the correction was typed into the expression. * Parameters: the invalid-name test types its expression draft (#3965) A new row starts with a blank expression, so the regression test types 10 mm and checks that correcting the name leaves that draft in place. |
||
|
|
ab80a410a1 |
Viewport theme: a light 3D view in a dark window, and the reverse (#4146) (#4147)
* claim: #4146 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Viewport theme: a light 3D view in a dark window, and the reverse (#4146) Preferences › Interface › Theme gets a Viewport row under the theme tiles: Follow theme (the default, as before), Light or Dark. Light or Dark draws the 3D view in the built-in Light or Dark theme's colours whatever the window uses, so a dark window can show the model on a light view and the other way round; it works with every theme, theme files included. The view takes the background and grid, bodies, selection and hover, the origin, previews, sketches with their dimensions and glyphs, the navigation cube and triads, box selection and the analysis colours. Panels, dialogs, menus and the chips over the view keep the window's. Text and warnings drawn straight onto the view (the sketch status line, the loose-end and midpoint markers, the section's cut outlines, the 3D sketch tool and the sketch tools' previews) take the view's side, so they read on its background. theme::ViewportTheme is the setting (saved as `viewport_theme`: theme, light or dark; an unknown saved value reads as Follow theme, as ColorVision's does). Tokens::get() takes the view's colours from the other side only when the view's dark or light differs from the window's; Tokens::view() is the view's side for colours drawn onto it. The ground shadow follows the view (the scene and highlight caches already key on the colours themselves), ui.render draws in the view's colours, and ui.prefs takes `viewport_theme` and reports `viewport_dark`. An older release ignores the setting and draws everything in the theme. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Viewport theme: follow the single set of axis colours Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
b94692497e |
Sketch Dimension: arc length from an arc and its end point (#754) (#4245)
* claim: #754 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 * Sketch Dimension: arc length from an arc and its end point (#754) The arc-length dimension existed (sketch.dimension type arc_length) but the Dimension tool could only give an arc its radius. An arc and one of its own end points, in either order, now dimension the arc's length: click the arc, then its end. The pair was refused before ("cannot dimension that combination"), so no existing result changes. A point where the arc's end is (a coincident line end) counts as that end. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
5d17fa970b |
Sketch: hovering a circle's edge wakes its centre (#5043)
* Sketch: hovering a circle's edge wakes its centre A circle's or arc's centre was hard to take with Line or Dimension: it is a small point in the middle of empty space, taken only within 8 points of the pointer, and nothing showed where it was. Hovering a circle or arc of the sketch being edited now wakes its centre: drawn (a cross in a ring) and taken from 16 points away, so the pointer can go from the edge across the inside to it. Hovering another curve or point puts it back to sleep, as does leaving the sketch. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * A woken centre's extra reach yields to a curve under the pointer Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
59cad5f0bb |
Colored components (feature request #2507) (#2877)
* feat: add colored components inspection toggle * feat: persist component colors and add cycling controls * feat: assign component colors in creation order * fix: update component color menu integration and translations * fix: proper description for pending format change. * fix: deleted duplicated format change description from docs/pending. * Compare the component colour counter in the features-only check Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Vadim Kalinsky <vadim@kalinsky.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
ab7602fd0e |
Project: don't lay a second copy over geometry the sketch already shows (#4929)
* Project: don't lay a second copy over geometry the sketch already shows A sketch on a face already holds the face's border, linked. Projecting that face again, or one of the border's edges, added a second set of curves and points over the first: on a rounded corner that shows as extra points and lines. Project now skips a reference whose curves are all linked into the sketch already (lines, circles, arcs), reports it as `already_projected`, and refuses a pick of nothing new so it adds no undo step. Points on their own (the origin, a vertex) still project. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Projecting the face a sketch already shows adds no second copy in the face scenario Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
0870d6474a |
Themes: Okibi (dark) and Akari (light), from the Okibi design system (#5730) (#5731)
* Themes: Okibi (dark) and Akari (light), from the Okibi design system Two built-in themes mapped from the Okibi design system v1.8 (https://kaievns.github.io/okibi-akiri-design-system-spec/): cool charcoal ash with a single ember accent, and its warm-paper light twin. Every one of the 156 colours is set, so nothing falls back to the Dark or Light palette. * Give the Okibi and Akari themes an icon palette Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
3045d0787e |
Dialog curve picks keep their sketch (#4057) (#4081)
* Dialog curve picks keep their sketch (#3726) * Format Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Format Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Adapt context-menu test to Sel::SketchCurve's sketch field Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Path Flange picks keep their sketch too Path Flange (#4096) landed after this PR and still looked its path up in the newest sketch with those ids. --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
9d45fa6b34 |
Respect design units across length fields (#3271) (#3315)
* claim: #3271 * fix(ui): use document units across length fields (#3271) * Format Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Adapt drag-extrude and joint tests to document-unit length helpers Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(ui): preserve blank parameter drafts and cover bounded lengths --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
157c0d68d0 |
Sketch Dimension: point/circle to circle or arc edge (#4064) (#4065)
* Sketch Dimension: point or circle to the edge of a circle or arc (#4064) Adds PointCircleDistance and CircleCircleDistance (edge-based, like #1863): solver, constructive seed, drawing, command wiring, tests, UI scenarios and docs. Saved designs gain two constraint kinds, in one pending format file. Fixes #4064. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Sketch Dimension scenario: pick the circle at its top edge (#4064) The bottom edge sits under the Dimension tool's status hint in the scenario window, so the second click never reached the tool. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
52e496d017 |
Sketch Symmetry: centre a line between two fixed lines (#1796) (#3895)
* claim: #1796 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 * Sketch Symmetry: centre a line between a face's edges (#1796) Symmetry of two edges of a face (its projected outline, whose sides run in opposite directions) about a construction line between them was refused with "neither entity can move". The pairing of the line ends by mirror image landed on main in #3029; this keeps the tool side and the tests for #1796: - The Symmetry tool and a three-line preselection take the only construction line or centerline as the symmetry line, whatever the pick order (picking it first used to mirror it out past the other line). Two points and a line take the line. Otherwise the last pick, as before. - Tests: fixed lines drawn the opposite way, pairs by mirror image (a V, end to end along the axis), every pick order, a three-line preselection, and a scenario clicking a face's edges. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
f7b08ab8c4 |
Dimension values: #name = value defines a parameter too (#2371) (#4212)
* claim: #2371 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 * Dimension values: `#name = value` defines a parameter too (#2371) `#width = 40` in a dimension's value now works like `width = 40` (#2916): it adds the user parameter `width` and dimensions with it. On `main` the `#` made it an ordinary expression that failed to parse. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
ee3d41210d |
Orbit about the cursor: over empty space, turn about the part in view (#2616) (#4947)
* Orbit about the cursor: over empty space, turn about the part in view (#2616) With Orbit around → Point under the cursor, an orbit begun over empty space turned about the middle of everything shown. For a part far from the origin and anything at the origin (a small body, a sketch), that middle is halfway between, far off screen, and the part flew out of view: a box at (50000, 50000, 0) with a 10 mm box at the origin went from (872, 535) on screen to (-277084, -279746) after a 180 px orbit. It now turns about the middle of the bodies the view shows part of, and only falls back to everything shown when no body is in view. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Restore LF line endings in the files this change edits Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
4f4b1fc2d2 | Sketch: select edge midpoints for horizontal and vertical constraints (#5159) | ||
|
|
d5a79a77e6 |
Agent chat: Pick context and Attach selection for elements, features and bodies (#2286) (#2288)
* claim: #2224 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Agent chat: keep Send in view for a long message, open "View attached" (#2224) The message box sat in a fixed 92-point reserve, so a long message grew it past the panel and took Send, Stop and Attach view with it. The box is now a panel of its own at the bottom: it grows upwards up to a cap, then scrolls, and the conversation takes what is left. The picture sent with a message is kept on it (once the agent starts on the message), and the "View attached" caption opens it in a window. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Agent chat: a message's pictures as thumbnails with a hover preview and a viewer (#2224) Instead of a window on the far side of the screen: the pictures of a message show as small thumbnails under it, hovering one shows it bigger for as long as the pointer stays, and a click opens a viewer over the app with the message's pictures one at a time (previous and next, arrow keys, Esc). A picture carries a note shown with it, so attachments of other kinds can use the same viewer. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * claim: #2286 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Agent chat: Attach selection sends what is selected in the model with the message (#2286) A checkbox beside Attach view. The selection is read when the message is sent (also for a queued one) and described: faces and edges with the names, indices and points the tools take plus their size and place, features by name and kind, bodies by name; at most 64, the rest counted. The agent gets it as text after the message; the conversation shows the message as typed with the things as grouped chips (hover for what the agent was told). Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * WIP: the chat's context picker dialog (#2286) * Agent chat: Pick context, a picker for elements, features and bodies (#2286) A button beside Attach selection opens the picker: a dialog with Elements, Features and Bodies inputs, so clicks in the model, the timeline and the browser pick into the active one (clicking again takes one out), with the usual highlight. OK puts the picks as chips with an x above the message box; they go with the next message like an attached selection (text for the agent, chips in the conversation) and the tray is empty again afterwards. Cancel keeps what was picked before. The control channel opens it with pick. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Agent chat: Attach selection counts and describes what was clicked, not the pieces of a rim (#2286) A click on a circular rim or a split surface selects all its pieces for the commands. The checkbox counted them one by one and the agent got one entry per piece (reported on macOS). They are now grouped back into the click they came from: one chip, one entry with the whole size, and the indices of every piece in its detail. Edge details are looked up by position as well as index. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Agent chat: a message's picture is kept on exactly that message (#2224) The turn now carries its message's place in the conversation (also through a queue and a send again after a sign-in), so its picture is kept there, once, and never on an older message that also wanted one (review of #2225). Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Agent chat: use the UI kit's checkbox and button and the font tokens (guard tests) Main's UI-kit guard tests reject raw egui checkboxes, buttons and font sizes in the chat panel; Attach selection, Pick context, the chip remove button and the chip fonts now come from ui_kit and Tokens. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
9e6e0b8df1 |
Render workspace: complete experimental ribbon, resources and effects integration (#5493) (#5494)
* wip(render): reconcile completed material and image pipeline source with 0.20 (#5493) Source-only integration reference for staged review, not a merge-ready aggregate. Donor: 0xlillith/solidcraft@aea20b0115. Upstream: |
||
|
+33 |
b7b25f9e2b |
Render workspace: first basic delivery to main (#6050)
* Normalize UI container violation paths across platforms (#5599) Report repository-relative paths with forward slashes so diagnostics and the existing nested-package regression assertions agree on Windows and Unix. Keep the container detection rules unchanged. Validation: official ui-containers gate and all seven focused xtask tests passed; rustfmt and diff checks passed. Only xtask/dependencies were compiled; no application build or heavy tests. (cherry picked from commit |
||
|
|
4612c5e6a9 |
Equal with three or more curves selected makes them all equal (#4985) (#5139)
* claim: #4985 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Equal with three or more curves selected makes them all equal (#4985) With more than two curves selected, Equal fell back to the pick tool and applied nothing. sketch.constraint.equal also takes curves: [2..200], each made equal to the first in one step (strict, so a conflict changes nothing), and the toolbar sends a selection of three or more curves as that list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
45edd5baf5 |
Fix midpoint picks in sketch dimensions (#4872)
Retain MID snaps across both picks and materialize reusable midpoint constraints for point-to-line and point-to-point dimensions. Let midpoint pairs choose horizontal or vertical spans with pointer placement before entering a value. Cover projected model edges, overlapping geometry, helper reuse, undo/cancel/reopen, and existing angular and line-circle workflows. |
||
|
|
fb374b543b |
UI: integrate theme radii, borders, palettes and viewport refresh (#5045) (#5046)
* claim: #4922 * UI: let themes own corner radii * UI: use four-point panel and window radii in SolidCraft 95 * UI: align the 95 radius assertion with four-point panels * claim: #4953 * UI: let themes own structural and control borders * UI: single Blueprint outlines and dotted secondary rules * UI: separate container outlines and add theme-owned 95 bevels * claim: #5007 * UI: apply theme palettes to icons, workspace tabs and Gruvbox settings * claim: #5045 * Viewport: invalidate cached geometry colours when the theme palette changes * UI: preserve legacy theme logo colours with the borderless mark |
||
|
|
0dffb206b1 |
Assembly: ground the first part; drag free joint chains (#2804) (#2805)
* assembly(feat): ground first parts and drag free joint chains Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR. Signed-off-by: Karl Von Richter<karl@embeint.com> * assembly(fix): update movable fixtures for first-part grounding Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests. Signed-off-by: Karl Von Richter<karl@embeint.com> * assembly(test): keep the motion-cost crank free Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure. Signed-off-by: Karl Von Richter<karl@embeint.com> * assembly(test): free the frame placement fixture Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main. Signed-off-by: Karl Von Richter<karl@embeint.com> --------- Signed-off-by: Karl Von Richter<karl@embeint.com> |
||
|
|
6eaf723041 |
fix(ui): preview shortcut chords and wait for complete modifier input (#1810)
Keep physical modifier events out of the ordinary-key slot, preview held keys immediately, and confirm after release and a one-second settling interval. Preserve legacy control-channel modifier behavior while allowing explicit physical Control/Command input. Add regression coverage, a UI scenario, localized guidance and documentation. Fixes #1809. Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
7e472bc4da |
Cancel Sketch: leave a sketch without keeping its changes (#3838) (#3938)
* claim: #3838 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 * Cancel Sketch: leave a sketch without keeping its changes (#3838) sketch.cancel (Cancel Sketch, ribbon Exit group and the sketch's right-click menu) puts the design back as it was when the open sketch was created or opened for editing: a new sketch is removed with its dimension parameters, an edited one returns to how it was. It is one undo step, so Undo goes back into the sketch. The session remembers the design and the undo history at the point a sketch is entered. Cancel uses that only while the history still runs through it (the same steps before, every step since taken in this sketch); otherwise it refuses and points to Undo, so a stale entry can never throw away later work. The icon is the approved close glyph in the sketch accent (alias sketch_cancel); ja and zh carry the new label. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
632ec4157c |
Sketch on a picked origin plane uses the plane shown after standing an import up (#5659)
* Sketch on a picked origin plane uses the plane shown, also in a moved component
After a STEP file opens its component stays the active one, and standing it up
turns that component a quarter about X. Starting a sketch on XY picked in the
viewport then sent `{"plane": "XY"}`, which names the active component's own
XY: upright after the stand-up. The sketch landed on the world XZ, Look At
turned to face Y and the extrude went along Y.
The viewport and browser only show the design's origin planes, so a picked
origin plane now goes to sketch.create written out as that world plane while
the active component is moved; sketch.create maps it into the component's
frame once. The flip toward the viewer uses the same plane.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Stand-up axes tests: stand the file up through the offer when one is waiting
#5655 offers to stand up SolidWorks files instead of turning them silently.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
c3ed8b1c07 |
Offer to stand up SolidWorks files instead of turning them silently; add Turn Up Axis to the component menu (#5655)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
1b215b521d |
icon_audit: compare the requested-icons manifest with CRLF checkouts ignored (#4932) (#4960)
* claim: #4932 * icon_audit: compare the requested-icons manifest with CRLF checkouts ignored (#4932) On Windows, Git for Windows checks out requested_icons.txt with CRLF line endings (core.autocrlf; the repo has no .gitattributes), while the test builds the manifest with \n, so the comparison fails although the lists are the same. Read the file with \r\n normalised to \n, as #1931 did for the icon tools. Regenerating still writes \n. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
da46c660df |
Coincident on two circles lays the second on the first (#5038)
Coincident with two circles (or arcs) picked was refused: "two curves must both be straight lines; otherwise choose a point and a curve". It now lays the second pick on the first: Concentric and Equal together, in one step, with the first staying put. A pair already concentric or equal gets only the other half; one already lying on the other is refused as nothing to add. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
edf57cec29 |
Stand up Y-up STEP and IGES files from SolidWorks automatically (#5191)
* claim: #5150 * Stand it up: don't offer it for SolidCraft's own STEP files (#5150) STEP replies from file.insert_step and doc.open now carry the file's originating system, and the window skips the stand-up offer when it is exactly SolidCraft, as SolidCraft's STEP export writes it. * Stand up Y-up STEP and IGES files from SolidWorks automatically The STEP header (originating system, preprocessor version, FILE_DESCRIPTION) and the IGES global section's native system ID say which program wrote a file. A SolidWorks header means Y up: the import's component is stood up as it opens, as one undo step, and the message offers Undo. SolidCraft's own files are left alone; an unknown exporter keeps the offer. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: Ray <raykholo@users.noreply.github.com> Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
186096cbe6 | agent chat: agent detection finishes on the start page (#3265) | ||
|
|
3b982ca371 |
Prevent deleted item IDs from being reused (#1016) (#3641)
* claim: #1016 * Prevent deleted design item IDs from being reused |
||
|
|
971b28c982 | claim: preferences redesign (#4608) | ||
|
|
f79cbc216c |
Redesign the home page as the File view (#2027) (#3822)
* claim: #2027 * Redesign the home page as the File view (#2027) * Match the File view with the accepted component design (#2027) * Restore the Start subtitle and simplify the recovery icon (#2027) * Integrate File view with main's shared UI containers |
||
|
|
e23a5bf243 |
Ship 14 more official themes: SolidCraft 95, Platinum 9, Cupertino, phosphor pair, Blueprint, One Dark and a pack of open-source palettes (#4602)
Registers them after the Gruvbox set in the Theme list, adds attribution rows, and keeps the heading-band ordering check passing by nudging heading/subheading (and, for High Contrast, dialog) backgrounds. Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
4b23bb3a03 |
Implement compact workspace layout (#2029) (#4533)
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover * Vertical history strip: seam handle to expand and collapse names, drag to resize with snap * Vertical history strip: no empty gap below the transport * Show the history seam arrow only on hover (#2028) * claim: #2021 * Redesign the Assistant chat panel with shared UI components * Show Assistant in the shared floating panel shell * Extend floating Assistant to viewport height and shift navigation * Dock Assistant before history and match docking preview bounds * Align Assistant top margin with floating shell cards * Extract a shared panel drag grip * Rebuild responsive history sizing and three-way docking * Share browser and History collapse hover styling * Show the History title as soon as its text fits * Animate stacked browser and History expansion and collapse * Make panel folding responsive and independent of frame delays * Let folding panel contents shrink continuously to header height * Use four explicit History transport actions in every layout * Resize the shared Browser and History column from either card * claim: shared compact-mode containers (#2029) * Centralize layout-aware UI containers and enforce their use * Keep docked Assistant at the outer edge beside tool sheets * Use shared surface policy for Assistant tool space * Let tool sheets drag over shell panels while avoiding Assistant * Update Parameters drag bounds assertion for shell overlap * Keep dragged tool sheets below ribbon and workspace selector * Enforce universal UI containers in mandatory repository checks * Remove legacy report windows and require shared window composition * Remove retired UI styling and require shared controls * claim: compact layout preference (#2029) --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
920398ac53 |
Bring back the view-change glide; orbit, pan and zoom stay instant (#4596)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
84ec512d7a | fix: midpoint tool rejects two lines (#3836) | ||
|
|
63f210b49f |
Restyle the vertical history sidebar (#2028) (#3953)
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover * Vertical history strip: seam handle to expand and collapse names, drag to resize with snap * Vertical history strip: no empty gap below the transport * Show the history seam arrow only on hover (#2028) * Extract a shared panel drag grip * Rebuild responsive history sizing and three-way docking * Share browser and History collapse hover styling * Show the History title as soon as its text fits * Animate stacked browser and History expansion and collapse * Make panel folding responsive and independent of frame delays * Let folding panel contents shrink continuously to header height * Use four explicit History transport actions in every layout * Resize the shared Browser and History column from either card |
||
|
|
57c3e94df6 |
Parameters: a new parameter's expression starts blank, and Tab selects a field (#2919) (#3096)
* claim: #2919 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Parameters: a new parameter's expression starts blank, and Tab selects a box of the add row (#2919) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Parameters tests: the add row's blank expression in the manage dialog tests (#2919) The two inventory tests typed a name and pressed Enter, counting on the 10 mm the expression used to start with; they now type it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Phanoob <phanoob@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
4b37c046e4 |
Sketch tools come back in the variant used last (#4308)
* Sketch tools come back in the variant used last, and it is kept in preferences Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Scenario: a new design keeps the remembered sketch variant Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
cb3cabeda1 |
Remove camera animation: every view change and orbit applies at once (#4296)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
b66ad0a9c9 |
Move shortcut respects the selected component (#3580) (#3588)
* claim: #3580 * fix(ui): move the selected component from its shortcut (#3580) |