2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d63aa814f jyviko: threads: main's tapped-hole sizes and shaft turn-down on the reworked thread
- cfc393d68 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #6608
* Canvas: keep value boxes clear of the command window (#6608)
* Canvas: describe how value boxes clear the command window (#6608)
* Canvas: keep the value boxes clear of the gizmo handles (#6608)
* ui-egui: format the value box regression test (#6608)
* gpu: the startup MSAA check skips when there is no GPU adapter
The check needs a real adapter to draw the multisampled view and to
resolve it, so on a machine with no software Vulkan adapter it is
skipped, with the reason printed, instead of failing the build.
SOLIDCRAFT_REQUIRE_GPU=1 still makes a missing adapter a failure, as in
the CI job that has a software adapter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5497
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch pattern: a spacing arrow dragged past zero gives a negative spacing (#5497)
The drag arrow floored an unsigned value at a small positive number, and the
rectangular sketch pattern's two spacing arrows were unsigned, although the
command takes a negative spacing and typing one works. Both arrows are signed
now, like the Extrude, Move and offset ones.
The test drags each arrow back past its start: without the change the first
one stops at 0.001.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Drag arrows: the solid pattern spacing and one-sided sketch offset go negative too (#5497)
The solid rectangular pattern's Spacing arrow and the sketch Offset distance
arrow were unsigned, so a drag back past the start stopped at a small positive
value, although both commands take a negative value and typing one works. Both
are signed now. A symmetric offset uses only the distance's size, so its arrow
still stops at the curve.
Tests: the solid pattern arrow dragged 10 mm back gives Spacing -10 and the
copies on the negative side (without the change: 0.001); the offset arrow
dragged across its circle gives -1 mm and the same circle as typing -1 mm
(without the change: 0.001), and a symmetric offset stays positive.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #4384
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: shared module, with Rest as the first tool
The Rest handles spike becomes a shared module, place_gizmo, so other features placed on a face can
use the same marker and knob. The mechanics (crosshair with its three states, the grab offset, the
footprint while dragging, the turn knob) live in place_gizmo.rs. The handles own the pointer through
canvas::owns_pointer, as the move triad does, so navigation and Select Other's press-and-hold leave
them alone. Each tool is one file under place_gizmo/ that gives a Spec: which dialogs it serves,
which commands' Position input also takes sketch points, where the place is, how the pointer
re-places it, its footprint and its turn, if any. The module lists the tools one per line, so tools
added on separate branches each add one `mod` line and one list line. Rest is the first.
The handles are always on; the preference the Rest spike had is gone. The POINTS accept flag on a
Position input is granted from the tools' Specs instead of a Rest-only arm in the plastic dialog's
start. Handles are published as `rest:position` and `rest:rotate` as before.
Seen straight down, the dialog's height arrow collapses onto the place and its value box sits just
right of it, where it took the press meant for a knob pointing that way. The knob now slides out
along its ray until it is clear of the box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Placement handles: Boss
The marker moves a boss across the model, also from Edit Feature, and its Position input takes
sketch points while the handles are on, so a screw boss can be dragged onto the centre of a
circle drawn for it. A boss is round, so it gets no knob; the footprint while dragging is its
outer circle. Published as `boss:position`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Placement handles: Snap Fit
The marker moves a snap fit across the model and its Position input takes sketch points while
the handles are on, so the arm can be put where a sketch says (#3423). The knob points the
catch: it turns between the four directions the Catch Direction combo offers for the face, so
the knob and the combo always agree; the command keeps only those four, so there is no free
turn. The footprint while dragging is the arm's foot, its thickness behind the place and its
width across. Published as `snap_fit:position` and `snap_fit:rotate`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Placement handles: the look in one file
Everything that draws the handles (the crosshair and its three eased states, the knob's ball, the
cased lines, the angle label, the colours) moves from place_gizmo.rs into place_gizmo/look.rs, so a
restyle touches one file and the mechanics (hit radius, drags, knob geometry) stay where they are.
No change in behaviour.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: behind a Design preference, off by default
The handles sit behind Preferences > Design > Placement > Placement handles (`placement_handles`,
also through `ui.prefs`), off by default as the hole placement work in #2912 is: a Rest, Boss or
Snap Fit is then placed by its click alone, its Position input takes faces only, and no handle is
drawn or published. The tests switch the preference on; one checks the default.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the tests hide the origin through set_origin_shown, as main does since #1849
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the move marker as designed in the prototype, drawn with theme tokens
The marker is a dot with four arms to the screen cardinals: short and dotted at rest, longer with open arrowheads when pointed at, solid while dragging, each state growing out of the previous one (360 ms). Sizes are the prototype's. Its core is the icon highlight and its casing the marker halo, the tokens main's hole handle uses, so the literal allowance goes. The tip shows while pointing, not during a drag.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the dialog's drag arrow stands above the move marker
With the handles on, the Height arrow started at the marker's centre and ran through its upper arm, head on arm tip. The arrow now keeps the marker's full reach and a gap free at the base, its shortest length grows by as much, and the base dot is left to the marker. Other dialogs are unchanged (clearance zero).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: a turn ring on the face replaces the knob
The ring lies on the face about the move marker's centre, drawn in perspective, a fixed 65 px on screen like the move triad's arrows (it is a control of something on the screen, not a measure of the model). At rest it is a short dotted arc with an open chevron grip just outside; pointed at, the dotted circle opens from the grip both ways round and the grip slides in and fills; while turning, a solid arc around the grip. Dragging the grip turns the feature as the knob did, through the same handle name, so the harness tests stand.
The floating value box yields: with a handle's centre under it, it moves to the other side of the arrow's tip or above it, since seen straight down the box sat exactly where the grip is. A handle the arrow's stem crosses keeps the pointer.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: a compass while turning, and the turn pulled onto the face's compass points
Four ticks just outside the ring at the face's in-face world directions (the ones the Snap Fit combo names, +X, −Y, …) appear while turning and stay put, so you can see how far you have gone. A Rest's turn is pulled onto one of them within 8°, otherwise it steps by 5° as before; Alt or Ctrl frees it. The readout beside the grip names the point it sits on ("90° · +X") and keeps clear of the ring.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the footprint in the preview's blue, the idle handle steps back
The footprint drawn while the marker drags is a filled shape in the preview's own blue with a thin darker edge, not a white outline, so white stays reserved for what can be grabbed. While one handle is dragged the other fades to a quarter and comes back when the drag ends.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the ring in the preference text, the docs and the tests' wording
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the look as tuned in the app
Marker: drawn to the redrawn design (dot r 3.9 pt, two dashes per arm, a filled head 8.7 × 7.1 pt whose base is where the outer dash began); pointed at, the outer dash becomes the head (its far end narrows to a point, its near end widens); dragging runs the inner dash on into the head as a shaft. Every casing is 0.4 pt outside the edge, for lines, heads and the dot alike.
Ring: the grip and the compass lie in the ring's plane like the circle, so the grip is never skewed against it; the grip is a thick chevron with a hole that flattens into the base as the grip slides onto the ring, and fills; the dotted circle stays while turning, with the solid arc laid over it; opening eases in and takes 0.3 s, leaving is a 0.15 s fade over the resting ring, not the sweep backwards; a drag keeps the angular gap of the press, so the grip does not jump onto the pointer; the compass ticks and the readout's point name are in their axis colours, and the grip takes the axis colour (eased) while aligned with one, with that point's tick left out; free turning keeps a hair of pull (0.5°) so an axis can still be hit; the readout wraps to a half turn.
Value box: with a ring it keeps out of the circle the ring, grip, compass and readout sweep, one place per view, nothing moves when a turn starts; also when the value does not evaluate and there is no arrow.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the readout shows a half turn as 180°, not −180°
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the motions in one place
The animations the handles grew (a factor eased in and out each way on its own time and easing, a handle stepping back while the other works, a colour that comes and goes from the last one it was on, the gap a press keeps for its drag, an offset that slides instead of jumping) move out of place_gizmo into motion.rs, so the next manipulator reuses them. The look's timings become Transitions in look.rs. No change in behaviour: the contact sheet before and after is identical, the harness tests stand.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Placement handles: the axis colours as main names them since #4430
The compass and the aligned grip take the one set of X, Y and Z colours (axis_x, axis_y, axis_z); the Move gizmo's own array is gone.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* Dialog curve picks keep their sketch (#3726)
* Format
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Format
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Adapt context-menu test to Sel::SketchCurve's sketch field
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Path Flange picks keep their sketch too
Path Flange (#4096) landed after this PR and still looked its path up in the newest sketch with those ids.
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3271
* fix(ui): use document units across length fields (#3271)
* Format
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Adapt drag-extrude and joint tests to document-unit length helpers
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(ui): preserve blank parameter drafts and cover bounded lengths
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2320
* Value fields step with the arrow keys and the mouse wheel (#2320)
Up/Down in a focused value field step a plain number by 1 in the unit it is written in
("20 mm" -> "21 mm", "2,5 mm" -> "3,5 mm"), 10 with Shift and 0.1 with Alt; the wheel over
the focused field does the same, a step a notch, instead of scrolling the panel under it.
Expressions such as `width / 2` are left as typed, and an open completion list keeps the
arrows. Every expression field gets this through `params_dialog::complete`: the value box
beside the geometry in every dialog, the dialog rows, sketch dimensions, the dimension
editor, Drive Joint and the Parameters window.
* The value box beside the geometry stays under the pointer
The box rides on the arrow's tip, so each wheel notch that stepped its value moved it, and
after a notch or two the box slid out from under the pointer and the wheel zoomed the view
instead. While the pointer is over it the box now keeps its place, and it goes back to the tip
when the pointer leaves.
* Value stepping is a preference, off by default
Preferences › General › "Step values with the arrow keys and the wheel" (`step_values`,
also through `ui.prefs`) turns on Up/Down and wheel stepping in value fields, and the value
box staying under the pointer while the wheel steps it. Off, as by default, value fields
behave as before: Up/Down move the text cursor, the wheel scrolls, and the box beside the
geometry follows its arrow.
* Value stepping test: Bend Radius is under Advanced now
* Value stepping test: the preference is on the Design page
* Value stepping test: draw the field straight into the test's frame (#2320)
The shared outer-host rule now covers tests too; the field needs no panel around it.
* claim: #5828
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Hem: the handle runs along the hem to its tip (#5828)
The hem's on-canvas handle started on the picked edge and pointed square
to the sheet (#4794 only flipped it), so it neither sat on the hem nor
moved the way the Length grows. Length is measured from the outer face
of the fold to the tip, so the handle now starts on the centre line of
the hem layer at that face and points along the hem toward the tip.
The test builds the hem for both Flip states and checks the handle's
direction, its start on the layer's centre line, and that start plus
Length lands on the built tip. It replaces the arrow-side test of #4836,
whose rule (the arrow points to the side the hem builds on) no longer
applies.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* feat: extrude a face or profile by pressing on it and pulling
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* feat: pull-to-extrude keeps the window open and sets the step by sideways motion
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pull to extrude: coarser step changes, a step ladder below the pointer, the step in the distance box
The step label sat on top of the distance box at the arrow tip. It is now a ladder of the
step in use between its neighbours, below the pointer, and the distance box also names the
step ("Step 1 mm"). One step change takes 44 px of sideways travel instead of 22.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pull to extrude: a setting, off by default (Preferences > Navigation)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Rename the pull setting to Direct interaction
It will also cover other direct gestures in the viewport later (grabbing an edge to round it).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #3034
* Pattern of features: show the direction arrow on the patterned feature (#3034)
A rectangular pattern whose Object Type is Features had no drag arrow
and no value box: the canvas anchor knew bodies, faces, edges and
sketch geometry but not a whole feature, so it returned nothing.
A picked feature now anchors at the middle of the geometry it made
(its bodies, or its faces on a body later features changed). The
pattern's preview stands in for the body the feature lies on, so the
anchor reads the feature's geometry including replaced bodies, as a
body pick reads its body.
* claim: #2873
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Press Pull: route curved faces to Offset Face, with an arrow (#2873)
Q sent every non-edge selection to Extrude, which takes only profiles and
planar faces, so a hole's wall or a boss's side was refused. The engine's
solid.press_pull already offsets curved faces; the window now does too:
- Q on a curved face opens Offset Face; its Faces input takes curved faces.
- Q with nothing selected opens Extrude as before, and a first pick of a
curved face or an edge reopens Press Pull on it (Offset Face or Fillet).
- Offset Face's arrow follows a curved face's outward normal where it was
picked, so it can be dragged like an extrude's.
Fixes#2873
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A Single hole can take up to two straight edges of its face as references,
each with the distance of the hole's centre from that edge's line, measured
in the face's plane. `solid.hole` takes them as `references: [{edge, distance}]`;
the edges are found again by their persistent names, else their points, so
the hole follows them when the part changes, and each distance is a
parameter. A bad reference (no edge there, a curved edge, one square to the
face, parallel edges, a negative distance, a centre off the face) is refused.
In the Hole dialog, Reference 1 and 2 follow the face, each with its Distance
row; the canvas shows each distance as a dimension from its edge to the hole,
with a box just past the edge to type it in. Picking an edge measures its
distance (and its box takes the keyboard), typing one moves the hole, and
moving the hole measures them again. Edit Feature picks the edges again with
their distances.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Placing a Single hole put it exactly where the click landed, with nothing to line it up by and no
way to move it but taking it out and picking again; the dialog was a list of size fields.
- Preferences › Design › Create Hole has two settings, both off by default, so a new installation
places holes as before:
- Snap to face and edge centres (`hole_snaps`): the planar face under the cursor offers its
middle and the centres of its round edges (a boss, a rounded corner, a hole already there) as
marks; a pick near one, or on or beside such an edge, takes that centre and the mark is named.
Sketch points on the face still come first; Alt or Ctrl held places it where clicked.
- Move holes by clicking or dragging (`hole_moves`): each placed hole has a handle that drags it
(snapping when snaps are on) and takes it out when clicked, and a pick elsewhere on its face
moves it there. Edit Feature shows the handle too, so a hole can be moved later (#1047).
- The Hole dialog draws a section of the hole as its options make it, with each size in a field
beside the dimension it sets; a hovered or focused field lights its dimension. The layout is a
new kit element, `ui_kit::figure_rows` (a caller-painted figure beside captioned fields).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4922
* UI: let themes own corner radii
* UI: use four-point panel and window radii in SolidCraft 95
* UI: align the 95 radius assertion with four-point panels
* claim: #4953
* UI: let themes own structural and control borders
* UI: single Blueprint outlines and dotted secondary rules
* UI: separate container outlines and add theme-owned 95 bevels
* claim: #5007
* UI: apply theme palettes to icons, workspace tabs and Gruvbox settings
* claim: #5045
* Viewport: invalidate cached geometry colours when the theme palette changes
* UI: preserve legacy theme logo colours with the borderless mark
The Move dialog's floating value box always showed and edited the X
distance, whichever arrow was dragged, and Tab left the box for another
widget. Now:
- dragging an arrow shows that axis's distance, turning a ring (Free Move)
that axis's angle; a plane square or the ball leaves the box as it is;
- Tab in the box goes to the next value (X, Y, Z, then in Free Move the
X, Y and Z angles) and Shift+Tab back, the keyboard staying in the box.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover
* Vertical history strip: seam handle to expand and collapse names, drag to resize with snap
* Vertical history strip: no empty gap below the transport
* Show the history seam arrow only on hover (#2028)
* claim: #2021
* Redesign the Assistant chat panel with shared UI components
* Show Assistant in the shared floating panel shell
* Extend floating Assistant to viewport height and shift navigation
* Dock Assistant before history and match docking preview bounds
* Align Assistant top margin with floating shell cards
* Extract a shared panel drag grip
* Rebuild responsive history sizing and three-way docking
* Share browser and History collapse hover styling
* Show the History title as soon as its text fits
* Animate stacked browser and History expansion and collapse
* Make panel folding responsive and independent of frame delays
* Let folding panel contents shrink continuously to header height
* Use four explicit History transport actions in every layout
* Resize the shared Browser and History column from either card
* claim: shared compact-mode containers (#2029)
* Centralize layout-aware UI containers and enforce their use
* Keep docked Assistant at the outer edge beside tool sheets
* Use shared surface policy for Assistant tool space
* Let tool sheets drag over shell panels while avoiding Assistant
* Update Parameters drag bounds assertion for shell overlap
* Keep dragged tool sheets below ribbon and workspace selector
* Enforce universal UI containers in mandatory repository checks
* Remove legacy report windows and require shared window composition
* Remove retired UI styling and require shared controls
* claim: compact layout preference (#2029)
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #2700
* Two-sided extrudes: the second distance goes the other way from the first side, either way round (#2700)
extent_sides ignored `direction` when an extrude had `distance2`, so through all with
`direction: negative` and a second distance went the positive way. The second distance now goes
opposite the first side wherever that went (direction: negative, a negative distance, a To
Object below the sketch). A pending format step makes older designs' reversed two-sided
extrudes positive, which keeps their shape.
The Extrude dialog's Two Sides shows Distance 2 for every extent type (it was hidden for All and
To Object but still sent as 10 mm) and offers Reverse; the second arrow points the other way
from the first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* The two-sided arrows test checks each tip against the sketch, not just their order
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Centralise tool modifiers with classic defaults and preview-safe Ctrl.
Route sketch/selection chords through a shared resolver. Keep Alt snap
suppress and dual toggle as defaults; optional Shift add-only and Ctrl
snap mapping. Skip preview rollback while a manipulator drag is active.
* Address #1616 review: classic snap suppress, single viewport owner, docs.
Default suppress to Ctrl/Cmd or Alt; drop navigation set_suppressed; remove unused label_key; add preview rollback gate test; document sketch modifiers.
* fix(#1616): correct Modifiers primary in tests; simplify rollback fixture.
* Treat Ctrl as primary off macOS, and rustfmt the modifier files.
New Body extrusions and Offset Face previews show successful intermediate distances from the same setup while a distance drag runs, then compute the latest one (tool previews keep streaming as before; errors still need exact inputs). The drag arrow and value box are painted from this frame's pointer, removing a frame of lag. Drag regression tests and a perf note added.
Measure now reads the picked item's exact shape (cylindrical faces, circular and arc edges,
sketch circles, arcs and lines, profiles, planes, points):
- A circle, hole or arc shows Ø, R and its length (circumference, or arc length and angle).
- A slot (a sketch profile, or a half-cylinder end of a slot in a solid) shows its width,
centre-to-centre length and overall length.
- Two items where one is round measure from the centre or axis by default (axis to axis,
axis to plane, edge or point), with the closest and farthest distances listed too; the
panel switches between centre, min and max, and the canvas line follows.
- inspect.measure and MCP `measure` (new `items` argument) add diameter, radius,
center_distance, min and max; existing fields are unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet/chamfer: point the drag arrow into the corner on inside edges (#1384)
The radius/distance arrow always pointed against the faces' outward
bisector, which is into the body on an outside edge but away from the
corner on an inside one, where the blend adds material. The arrow and
the spline radius handles now take each edge's convexity into account,
so dragging out along the arrow grows the value on both kinds of edge,
and each edge of a mixed chain follows its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: no unreachable! in the blend arrow helper
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A symmetric solid extrude of 10 mm is now 10 mm thick, 5 mm each side of the sketch plane, and switching from One Side to Symmetric keeps the thickness entered. Under format 21 the extent records its convention; designs saved without it keep the per-side reading, so their geometry and parameters don't change. Fixes#1236.
Co-authored-by: Karl-VonRichter <Karl-VonRichter@users.noreply.github.com>
An opt-in Touchpad navigation preset: Shift + pointer motion pans, Alt/Option + motion orbits, vertical scroll zooms, all without a mouse button. Existing presets are unchanged; view.navigate gains continuous motion for the control channel and scenarios.
* Smart Extrude: direction from the picked side, Cut into a body stays a Cut (#1257)
- A sketch profile (or a thin extrude's curve) extrudes toward the side it was
picked from: from the bottom view it goes down. Body faces still go outward.
- The automatic operation is latched per side of the profile: a drag that starts
into a body is a Cut and stays one past the far side; a Join does not become a
Cut when it reaches another body. Passing through zero decides afresh for the
new side.
- An explicit operation, Direction or Reverse ends the automatic choices.
- auto_operation also looks just past the profile, so a long cut through a body
reads as a Cut from the start (the engine's operation: "auto" too).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Scenario s07: the XZ profile seen from behind now extrudes toward the camera
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The preview builds only the tool; the boolean runs once on OK, off the window thread, with a Computing label while it takes a while. Follow-up to #1020.
Thin Extrude builds walls of a set thickness along sketch curves, open chains and closed loops, with the wall centred, inside, outside or on both sides at two thicknesses. Saved under format 20 (thin on an Extrude); an extrude without thin saves as before. Closes#721.
* Holes on round faces from the app, one hole per pick, and Flip for holes at sketch points (#967)
The Hole dialog takes any face: a hole on a round face drills against the face's normal where it
was picked, and its arrow shows that. A round face split at its seam is picked whole, but makes
one hole where it was clicked. Holes at sketch points get Flip (saved as flip in the hole's points,
under format 18), in the command and in the dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Holes at sketch points show their arrow: into the part, or away with Flip (#967)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
sketch.pattern.rectangular gets a tool window with both quantities and spacings and an optional direction, instead of a click flow with a fixed count.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Sketch Move gets a toolbar placement in Sketch > Modify and a Move/Copy tool window with X and Y distances, an angle, an optional centre point and a Create Copy flag, replacing the context-menu route that ran the command with no parameters.
Completes the Japanese catalog (all commands, panels, dialogs and preferences) and routes the remaining hard-coded UI labels through the translation lookup. English stays the default.