Commit Graph
120 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 5a4e482e9c Wave 260/509: Formatting: rustfmt over the rebased branch (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 562a5bd33 jyviko: Formatting: rustfmt over the rebased branch
- bc15221fa jyviko: The desktop app links SMLib by default
- e476aba94 jyviko: SMLib in the browser: built with wasi-sdk for wasm32-unknown-unknown
- e1ad6ec1a jyviko: SMLib links prebuilt: one build per commit, pinned by SHA-256

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-26 22:57:25 -04:00
jyvikoandClaude Opus 5.5 ab9c676627 Wave 169/509: kernel: an intersection curve is where SMLib's imprint cuts, exactly (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- beebf2203 jyviko: kernel-cases: --dumps=DIR leaves each failing SMLib call's inputs for replay
- 83c0f4e2c jyviko: AGENTS.md: SMLib is the kernel; no switch, no other kernel
- 1b27c134d jyviko: kernel: an intersection curve is where SMLib's imprint cuts, exactly
- 9398b2586 jyviko: kernel: intersection edges exported from the crate root

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 07:27:07 -04:00
jyvikoandClaude Opus 5.5 4a589aca8c Wave 147/509: doc: sweeps along linked and planar curves follow the exact curves (and 1 more)
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 7952516eb jyviko: doc: sweeps along linked and planar curves follow the exact curves
- 43e8b0349 jyviko: kernel: a point path's polyline is swept as the lines it is, however smooth

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 01:01:49 -04:00
jyvikoandClaude Opus 5.5 ce8c6063bd Wave 113/509: kernel: SMLib sweeps along drawn 3D sketch splines, exactly (and 1 more)
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- d1eb8b20a jyviko: kernel: SMLib sweeps along drawn 3D sketch splines, exactly
- f73b3be1a jyviko: kernel: a 3D sketch spline path takes the SMLib sweep only

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 00:22:49 -04:00
Dahak BuildsandRayGalt 2863b80574 Sketch: 3D arc command (#5681) (#5682)
* claim: #5681

* sketch: exact circular arcs on drawn 3D wires (#5681)

Add WireArc (centre, unit normal, radius, start/end) as an optional analytic
form on drawn 3D sketch wires, with arc_from_3_points, arc_sweep and
sagitta-bounded arc_polyline; add_drawn_arc_in stores the arc, its three
defining fit points and its samples; move_drawn_point re-derives the arc
atomically and refuses collinear points; validate_wires checks saved arcs.

* engine,ui: sketch.arc3d exact 3D arc command (#5681)

sketch.arc3d draws an exact circular arc through three world points in a 3D
sketch, stored analytically beside its fit points and samples; sketch.move3d
rebuilds it, sketch.inspect reports centre/radius/sweep; placement mapping
(map_wire, now shared with the engine's world state) transforms the arc.
One pending design-format file records the new field. The viewport's 3-Point
Arc tool draws a 3D arc when clicked off the sketch plane, with a live arc
preview; the SKETCH panel offers sketch.arc3d.

* ui,engine: 3D Arc button starts an interactive tool (#5681)

sketch.arc3d now maps to a Draw(3) tool handled by sketch3d: three world clicks (start, end, through - same order as the 2D arc tool) run the command, with the live arc preview and snapping. The command is only enabled while a 3D sketch is open, so the toolbar never offers a tool that could only fail. Locale labels for the command.

* ui: cargo fmt

---------

Co-authored-by: RayGalt <RayGalt@pm.me>
2026-10-26 16:29:39 +00:00
Colin Faulkingham 484f0cf8ae Sketch: keep nested circles ordered when diameters change (#6764) (#6789)
* claim: #6764

* fix(sketch): preserve nested-circle order during dimension edits (#6764)
2026-10-26 11:14:59 +00:00
semmelrindeandClaude Opus 5.5 e2c9f908f8 Sketch: an offset slot can still be moved by the dimension that places it (#6569) (#6697)
* claim: #6569

* Sketch: an offset slot can still be moved by the dimension that places it (#6569)

An offset arc is drawn round its source's own centre, and its ends are
held while the sketch solves (the offset is rebuilt from its source
afterwards). Its arc condition, both ends as far from the centre, then
only tied that shared centre, and the source arc with it, to the middle
of the held ends: a slot offset by 1 mm lost a degree of freedom, and
the length that places it was refused as conflicting.

The solver and the constructive reading now leave out the arc condition
of an offset arc round its source's centre (Sketch::offset_arc_follows_source),
as #4466 did for the Parallel between an offset line and its source. The
source's own arc keeps the centre; nothing changes without an offset.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a test for a rounded rectangle with an offset round it (#6569)

kaievns's case from the review: the offset's corner arcs tied each corner
centre to a 45 degree line, so the height followed the width and every
width change was refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:12:15 +00:00
Kai Evans 41a938e731 Sketch: a fillet stays the arc of its corner when the corner mirrors or a line is dragged through it (#5677)
A line tangent to an arc at the arc's end had no sense: the tangency held
with the line on either side of its touch point, so pinning a line's far
end across the corner left the line cutting back through its fillet, and
when the solver found the mirrored corner the arc kept its stored
direction and became its three-quarter complement, inside out.

The solver now keeps each fillet an arc of its corner. A line tangent at an
arc's end keeps its sense there (it leaves the arc as it did) and the arc
its side of its chord, compared with the positions before an interactive
move or the stored ones. A corner that mirrored gets its arc on the
mirrored side: its ends swapped where the solve ran the arc round the
other way with the lines following, or the arc reflected across the line
that stayed and solved again where a line cut back through. A solve that
would loop the arc the other way round, or fold a line onto it, is refused
as a fold is. A drag's cursor-following steps keep the fillets too, so a
line dragged through its own fillet stops at the arc.
2026-10-26 10:42:41 +00:00
raykholo 878339cac8 Sketch patterns: count, spacing, and angle follow parameters (#5231) (#5332) 2026-10-26 04:31:55 +00:00
Steven HuffandClaude Sonnet 5.5 ccea34e73c sketch: a tangent whose contact is tied by Coincident, PointOnCurve or Midpoint is solved at the contact (#2584)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 21:37:51 +00:00
DuBearteandClaude Opus 5.5 0752d8d79c Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543) (#5789)
* claim: #5543

* Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543)

A circle drawn twice at one place is two profiles of one region. Extruded
together they were two coincident tools: a cut through a 121-hole grid with
four such circles retried the boolean with the tool nudged (four times) and
took 25 s instead of 0.5 s.

merge_regions, which every extrude, revolve and surface feature runs on the
regions it builds from, now leaves out a region whose boundary repeats an
earlier one (within 1e-7 of its size; corners and segment middles on the
other loop both ways, holes alike). The selection itself keeps its
multiplicities, as profile_refs' tests require.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:10:02 +00:00
NOWN-DEVandClaude Opus 5.5 826244bb28 Text parameters: a sketch text's words built from them follow every change (#727) (#6364)
* Test: a text's words follow its text parameters, and so does its cut

A sketch text whose words are an expression of text parameters (`Label + '-L'`): a parameter edit
and a configuration row that sets the parameter relabel the text, the text's cut follows, and the
expression is saved with the design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Text parameters: a sketch text's words built from them follow every change

A design's parameters are numbers; a text's words (a part label, a size code) could only be typed.
Text parameters hold words: `parameters.add` or `parameters.change` with `unit: "text"` (the
expression is the text, quotes optional), and `sketch.text` and `sketch.edit_text` take
`text_expression` (quoted texts and text parameters joined by `+`, `Label + '-L'`) instead of
`text`. The text is laid out anew from its expression on every evaluation, so a parameter edit,
a configuration row or a script relabels it and the features built on it (a cut, an emboss)
follow in the same rebuild. The design file keeps the text parameters and each text's expression
(one pending format change); a configuration table's parameter column can be a text parameter;
the Parameters dialog lists them under the unit `text`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Text parameters: the joints' same-but-features check compares the text parameters

The joints are solved once per change unless the design differs only in its features
(same_but_features, #6372), which names every Document field. The text parameters are a
field of their own and change what a text's words evaluate to, so two designs that differ
in them are not the same but for their features.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 20:24:23 +00:00
ab7602fd0e Project: don't lay a second copy over geometry the sketch already shows (#4929)
* Project: don't lay a second copy over geometry the sketch already shows

A sketch on a face already holds the face's border, linked. Projecting that face
again, or one of the border's edges, added a second set of curves and points over
the first: on a rounded corner that shows as extra points and lines. Project now
skips a reference whose curves are all linked into the sketch already (lines,
circles, arcs), reports it as `already_projected`, and refuses a pick of nothing
new so it adds no undo step. Points on their own (the origin, a vertex) still
project.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Projecting the face a sketch already shows adds no second copy in the face scenario

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:13:46 +00:00
raykholo df01e59716 Sketch: an x distance beside a y distance on the same points isn't refused (#4352) (#4387) 2026-10-25 18:27:40 +00:00
raykholo d876f475a6 Sketch: a distance dimension of 0 keeps the sketch fully constrained (#4368) (#4397) 2026-10-25 18:19:55 +00:00
Matt Van Horn 43565cd33b Snap drawing to where two sketch curves cross (#4967) (#5342)
While drawing, the pointer snaps to the crossing of two lines, circles or
arcs and keeps the new point on both curves. Shift still prefers a midpoint.
2026-10-25 04:50:20 +00:00
rbousigues88andClaude Sonnet 5.5 157c0d68d0 Sketch Dimension: point/circle to circle or arc edge (#4064) (#4065)
* Sketch Dimension: point or circle to the edge of a circle or arc (#4064)

Adds PointCircleDistance and CircleCircleDistance (edge-based, like #1863):
solver, constructive seed, drawing, command wiring, tests, UI scenarios and docs.
Saved designs gain two constraint kinds, in one pending format file.

Fixes #4064.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch Dimension scenario: pick the circle at its top edge (#4064)

The bottom edge sits under the Dimension tool's status hint in the scenario window, so the second click never reached the tool.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 04:29:28 +00:00
semmelrindeandClaude Opus 5.5 43f21e8fec Sketch drag: a live frame stops once its numerical solves have done their share (#6330)
A live drag frame shares one work budget between its held solves, but
only their cluster decomposition was charged. The numerical solve (LM)
ran outside it, so in a larger sketch where the geometry can't follow
the cursor, one frame ran 64 failing held solves of about 150 ms each:
10 s per frame (68 points, 50 curves, 58 constraints, found by
randomised sketch editing). The frame budget now also counts the LM
work of its held solves, without stopping a solve: once a frame's share
is spent, the drag takes no more steps in that frame, keeps what it
reached and asks for the next frame (retry), as the viewport already
handles. The same drag now takes about 0.3 s per frame. Solves outside
live frames are unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:42 +00:00
NOWN-DEVandClaude Opus 5.5 0063954286 Sketch: a sketch whose links moved far is walked there and keeps the stored sides and turns (#6420)
* Test: a label on a path follows its source far

A rectangle of construction lines placed on three points projected from another sketch, with a
centred text on its far side: moved 270 away by the parameters that place the source, its solve
from the stored sketch failed ("the sketch constraints conflict").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sketch: a sketch whose links moved far is walked there and keeps the stored sides and turns

Problem: a change upstream moves what a sketch projects (or the points its parameters place)
while its own values stay. The solve from the stored state then either failed ("the sketch
constraints conflict") or landed on the mirror image of a side or turn and reported it solved,
because a solve after a link move checks no orientation when no value changed: a line tangent to
a moving circle hopped a diameter to the circle's other side. And a sketch moved so was stored
only when its own values changed, so every later evaluation solved it from its first stored state
again.

Solution:
- flips_from_stored: the orientations of the stored sketch (unsigned offsets, distance
  triangles, and a line's side of a circle it is tangent to) that a solved sketch turned over,
  each read where the stored sketch has its points.
- solve_after_link_move: the new values solved where the links were stored, then the moved
  points walked to where they are now (predictor-corrector: each step starts from the last two
  solutions carried along their secant; steps halve on a failure or a flip and grow while they
  solve).
- Document::solve_sketch: when a linked or fixed point moved and the jump fails or flips, the
  walk; a flip the walk cannot avoid either is reported as one.
- Model::edited_sketches: a sketch whose linked points a value edit moved is stored as solved, so
  the next evaluation starts where this one ended.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:17 +00:00
CamWightandClaude Opus 5.5 d557c09c3b Sketch text: measure a line with the rule that draws it (#4813) (#4815)
* claim: #4813

* Sketch text: measure a line by the rule that draws it (#4813)

`TextMetrics`, made once from a font and a style, parses the face once and gives the scale for a capital height, the
distance between lines, a line's width and the characters the font has no glyph for (in order, each time, including
those its character map sends to `.notdef`). `text_geometry_styled` lays its lines out through it: one rule for
measured and drawn text, no kerning, a missing character still drawn as `?`. Measuring builds no outlines, so a text
too large to draw (`MAX_LINK_ENTITIES`, `MAX_TEXT_CHARS`) can still be measured. Every outline stays bit for bit the
same: a test pins five styled texts, captured before the change. The size and spacing checks are shared, and still
run before the font is looked for; a text whose place or angle is not finite now says so instead of naming its
height.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:49:22 +00:00
Alexander Puzynia 37b7b0bd3e Offset free-form curves and mixed chains: trim folds, round corners (#2149, #2676, #2761, #3159, #3828) (#4156)
* Offset of free-form curves: trim folds, round chain corners

Offsetting a spline by more than its tightest bend failed with "offset spline
has no interior certificate correspondence": the plain offset folds over itself
there and a single linked spline cannot follow it. A chain of Bézier curves (any
imported SVG outline) was refused outright.

Such an offset is now the parallel boundary: the plain offset of every piece,
joined round each corner by an arc about it, trimmed where it folds or crosses
itself (a sharp corner is left), each kept run fitted with an open spline and
certified to the offset tolerance, and the whole proven free of crossings. Tiny
kinks are joined directly; zero-length Bézier handles (infinite curvature at
the end) are replaced by their chord within a quarter of the tolerance. A
single curve whose plain offset is smooth still gets the linked offset; the
trimmed or chained result is ordinary curves, not linked to the source, so the
command adds no distance parameter for it.

* Offset chains mixing lines or arcs with free-form curves

A chain offset read every curve with Sketch::exact_segs, which only covers free-form
curves, so a chain with straight or circular pieces (a text glyph, an SVG path with
L commands) failed with "offset source changed shape". Read them with exact_pieces,
which gives lines and arcs from their analytic form; the trimming already handles
those pieces.
2026-10-24 21:27:31 +00:00
dudedagger42andClaude Opus 5.5 7e24f0e35a Sketch: a group too large to solve says so, not "conflicts with" nothing (#5280) (#5347)
The solver takes at most 4000 unknowns in one connected group, and a
pattern joins all its copies into one, so a hexagon patterned 17 × 20
(4000+ unknowns) failed as "that would over-constrain the sketch
(conflicts with )", naming no constraint. The solve report now carries
the size of the largest group it could not take, and the failure says
how many unknowns are joined, the limit, and that fewer copies or
several patterns or sketches stay within it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 21:26:40 +00:00
rlartotandClaude Sonnet 5.5 e726f780d1 Sketch: the first dimension scales only a connected drawing (#3786) (#3815)
* claim: #3786

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch: the first dimension scales only a connected drawing (#3786)

The first length dimension scaled the whole sketch about its origin, so a
second rectangle that nothing links to the first was resized and moved too.
Now the sketch scales only when its curves form one chain, joined by shared
points or constraints (the origin counts as a point); separate shapes keep
the previous behaviour: the dimension sizes the shape it measures.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-24 21:21:08 +00:00
raykholo b00a1e87f4 Insert SVG: refuse geometry scaled to infinity, and bound the profile grid (#5020) (#5025)
* claim: #5020

* Insert SVG: refuse geometry scaled to infinity, and bound the profile grid (#5020)

A transform such as scale(1e308) turned a circle's radius into infinity.
The SVG reader now refuses non-finite transforms and geometry with a clear
error, and Grid::cells in the profile finder uses checked arithmetic, so an
infinite or huge box is checked against all shapes instead of wrapping the
cell count and allocating until memory runs out.

* Insert SVG: refuse lines with infinite ends; fix the grid test's cell count

A line whose transformed ends are infinite was dropped silently, because the
distance between them is NaN. It is now refused as out of range, like curves.

The new grid test expected one cell for a box spanning its own one-box grid;
such a box touches the 2 x 2 cells at its corners, so it expects 4.
2026-10-24 20:46:21 +00:00
Kai Evans 97e0ff9050 Sketch: a face seen edge-on projects as one line end to end (#5375)
A face orthogonal to the sketch plane projected every edge onto the same
line: coincident and overlapping pieces, one per notch, that the face
boundary check then refused on the next evaluation ("boundaries cross,
touch or have ambiguous topology") and marked lost.

A link layout whose straight pieces all fall on one line is now one line
between its two farthest points; vertices along it can be projected one
by one. The face-boundary and loop-identity checks skip such a silhouette,
which encloses nothing. Coincident lines are laid out once.
2026-10-24 20:46:01 +00:00
raykholo e5dffc7052 Flatpak: find the host's fonts for CJK text and the font list (#5124) (#5127)
* claim: #5124

* Flatpak: find the host's fonts for CJK text and the font list (#5124)

Inside the Flatpak sandbox the host's fonts are mounted at /run/host/fonts
and /run/host/user-fonts, which no font search looked at. Japanese and
Chinese text fell back to boxes, and the font list missed the host's
families.

- Search both folders for the CJK and Chinese fallbacks and for the
  installed-font list.
- The CJK fallback reads SOLIDCRAFT_FONT_DIRS (a path list, as the font
  list already does), with CRAFT_FONTS_DIR kept as a fallback.
2026-10-23 15:18:58 +00:00
FrankandClaude Opus 5.5 3acb81964a Sketch offset keeps its source lines free to turn (#4464) (#4466)
* claim: #4464

* Sketch offset keeps its source lines free to turn (#4464)

An offset adds a Parallel between each source line and its offset line.
Since offsets became associative, the offset's points are held during a
solve, so each Parallel pinned its source line to the offset line's
current direction: a closed chain lost its turning freedom (8 degrees of
freedom became 6), and Horizontal or an angle edit on a source line was
refused as conflicting.

The solver and the constructive reading now leave out a Parallel that
ties an offset line to the source it follows while the association lives;
the association already keeps them parallel. After Break the stored
Parallel drives again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:30:21 +00:00
Reefwalker 3ed1829cc7 fix: retain circular sketch pattern Quantity expressions (#4435) (#4607) 2026-10-23 13:45:15 +00:00
HiroKenEzandClaude Opus 5.5 60efbe39e3 Sketch drag: a linkage with redundant parallelogram constraints still moves (#4585) (#4983)
* claim: #4585

* Sketch drag: a linkage held by redundant parallelograms still moves (#4585)

Cursor motion looks for the sketch's freedom in the null space of the
constraint Jacobian. Redundant constraints (a parallelogram held both
parallel and equal on each pair of sides) are dependent only at an exact
solution; after a correction to the solver's tolerance their rows differ
by about 1e-9, which the 1e-9 pivot tolerance counted as rank, so the
null space came out empty and a one-DoF linkage stayed locked. Use the
rank analysis' 1e-7, so the drag sees the freedom the sketch reports.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 13:43:49 +00:00
f815491936 2-tangent circle: start from the touching circle, not the click (#3141) (#3210)
* claim: #3141

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 2-tangent circle: start from the touching circle, not the click (#3141)

The tool passed its second click as the place to start solving, and a
click lies on a curve: the circle began centred on that curve, where its
tangency has no side yet. The solve then moved the user's curves to fit
(a rectangle came out skewed), or failed outright when they were fixed.
The command now starts from the centre, nearest the requested point, of
a circle of that radius touching both curves (where the curves moved by
the radius meet), and the tool asks for the circle between its two clicks.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:15:34 +00:00
JakobonlyandClaude Opus 5.5 23b0120759 Sketch: a radius dimension past an arc's end extends the arc to its arrow (#3393) (#3408)
* claim: #3393

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

* Sketch: a radius dimension past an arc's end extends the arc to its arrow (#3393)

A radius or diameter dimension on an arc whose leader is dragged past the arc's
ends had its arrow pointing at empty space. The radial frame now keeps the arc's
span, and an arrow outside it gets the arc continued from the nearer end round
to the arrow tip and a little past it, as dimension drawings do. Full circles,
ellipses and arrows on the arc are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 15:40:26 +00:00
takuto-NAandbherbruck 843c0bf97a Reduce repeated sketch diagnostics and enable normal-CI profiling regressions (#2355) (#2359)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 13:55:25 +00:00
takuto-NA d8eb65d26e Make constrained sketch edges follow the cursor (#3360) (#3362)
* claim: #3360

* Fix constrained sketch edge following and final drag coordinates
2026-10-20 12:43:59 +00:00
fe3b14e798 refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)
* Iterate instead of indexing in nine loops

Replace index loops that look up neighbours by position with enumerate,
zip(cycle().skip(1)) for wrap-around pairs and zip(skip(1)) for
consecutive pairs. No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: ring_edges for the edges of a closed ring

Every walk over a polygon's edges, the last back to the first, spelled
x.iter().zip(x.iter().cycle().skip(1)); eighteen of them now call
geom::ring_edges. Three redundant take(len) calls go with them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Ring, a closed ring that knows it is closed

A Ring holds items in order around a closed polygon, loop or fan; edges()
walks each with the next and the last with the first, corners() each
with both neighbours. Ring<Vec2> has signed_area and even-odd contains.

Loop2::polyline returns a Ring, as do doc's face_loops and
boundary_loops, kernel's coplanar wire samples, CapLoop's segments,
tess pieces' rings, the gizmo's plane quads and the navigation cube's
facets. Their walks take edges() or corners() instead of wrapping an
index; sketch's text-hole test and doc's poly_area become contains and
signed_area. Loop2::joints pairs each segment with the next.

Replaces the ring_edges free function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain, Ring and Path; bounds for a chain of points

Ring becomes Chain<T, Closed> beside Path = Chain<T, Open>: edges()
closes a ring and stops at a path's end, Path::close makes the ring,
and bounds() (the empty box for no points) serves both. Eight
hand-rolled min/max folds over a loop's polyline call bounds(); doc's
flat_polyline returns a Ring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area and inside on Ring for any planar point

Ring's signed_area and contains take any Planar point (Vec2 or
[f64; 2]). The cam profile in joints_cam is a Ring: its own even-odd
test goes, and its edge walks, gap and area take edges(). face_params'
loop area, the text path's winding, tess pieces' ring area and the
copies in three tests call signed_area or contains; the formulas are
the same term for term.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: sheet's closed outlines go through Ring

dedup takes and returns a Ring (dropping a last point back on the first
is what makes it a ring's), near_outline walks a Ring's edges, and the
copy of it beside fold checks calls it. point_in goes: its callers ask
the Ring. Its formula anchored each crossing on the other end of the
edge, so the two can differ only for a point on an edge to the last
digit; one caller sets such points aside first, the others test a
region's interior point, a cut's midpoint or another outline's corners.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: cam tests build their outlines with Ring::from

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area_vector on Ring<Vec3>; three Newell sums use it

Ring<Vec3>::area_vector is half the sum of a × b round the ring. heal's
loop_area, lip's outer-loop turning and the revolve's loop orientation
summed it by hand with a wrapped index; they take it from the Ring
(the half is exact, and two of them only read its sign).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3 from points; boxes built and asked through it

Aabb3 collects from points (skipping non-finite ones, as add does) and
gains inflated, contains and meets. Fifteen hand-rolled min/max folds
over points or boxes in kernel, doc and engine become collect or union,
and their "within tol of the box" tests become inflated(tol).contains.
blend's refused-edge boxes and naming's face index hold an Aabb3.

A NaN point is now outside every box, where the old negated
comparisons let it in; an infinite point no longer stretches a box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb2, the plane's box; 2D folds and box tuples use it

Aabb2 mirrors Aabb3 (collect, add, union, inflated, contains, meets)
and adds relative, a point's place in the box. sketch's link and
link_loops each had that formula; link_loops' boundaries, prism's
segment and loop boxes, profiles' shape boxes and grid, and ends'
segment box hold an Aabb2 instead of a (low, high) pair. Folds in the
cam, sketch bounds, sheet's perforation grid and the sketch clipboard
collect one.

Boxes are built from the same terms (a round's box keeps c - r - tol).
As with Aabb3, a NaN point is outside every box and an infinite point
no longer stretches one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel: prism's segment boxes are plain Aabb2s

The SegBox alias named a (low, high) pair; Aabb2 says it itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain::bounds is an Aabb2; the boxes #2382 left as pairs follow

Chain::bounds returns an Aabb2. Its callers keep it: sheet's hole and
cut boxes (loop_box), letter boxes, island outlines and line-near-cut
test use meets, contains and inflated; profile's outline overlap and
max_clearance, profiles' box tests and the cam test read its corners.
flat_size and the flat pattern's JSON size are the union of the loops'
boxes (0 × 0 for no loop, where the pair fold gave -∞).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3::intersection; hand-grown and hand-met boxes use the box

Aabb3::intersection is the box both hold. ops' four overlap boxes of a
boolean's operands take it, and seven boxes grown by hand (ops' body
boxes, the distance set's bounds, coplanar's face box, eval_more's
padded mesh box, compare's group and region boxes) call inflated with
the same amount on every side.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:44:49 +00:00
e27d43553c Sketch Dimension: line to circle/arc edge (#1803) (#1863)
A line and a circle or arc can now be dimensioned to the circle's edge
(ConstraintKind::LineCircleDistance, saved as line_circle_distance): the gap
while the line misses the circle (0 is tangency), or how far the edge reaches
past the line when it cuts through (stored as `inside`).

Rebased onto main as one commit (the branch's own changes; its merges of main
dropped). Conflicts resolved: the test mod lines in cmd/sketch.rs (both kept,
sorted), and README.md, whose feature list main moved to docs/capabilities.md;
the line-to-circle dimension is listed there now.



Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

Co-authored-by: jyviko <jyviko@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 03:44:16 +00:00
e4d9015f68 sketch: points placed by expressions (#2864)
* Sketch points placed by expressions over the design's parameters

A point typed as an expression ("W", "H / 2") in sketch.point, sketch.line and
the other point arguments is fixed where its expressions come to, and moves
there again before each solve when the parameters change: an outline that
follows its parameters needs no dimensions and no solve per change. The
expressions are saved with the point (one pending design-format change), listed
with the sketch's other expressions, and renamed with their parameters; one
that cannot be worked out is refused.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Sketch point expressions: accurate params doc, out-of-range regression test

The sketch.line params said every point argument takes expressions; only those that
also take a point id do (the rectangle corners, an arc's through point and the like
are plain [x, y]). PointExprs' comment called its expressions mm. A test covers a
parameter that puts a placed point out of range and a design file whose point
expression overflows: both are errors, not crashes, and the sketch recovers.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 13:05:28 -04:00
takuto-NA 3a9b053f5b Fix constrained point dragging within the shared frame budget (#1976) (#1977) 2026-10-19 07:24:04 -04:00
leValdemar19andClaude Opus 5.5 86b2b97d6f Sketch Offset: constrain to the ends of an offset spline (#2424) (#2615)
* claim: #2424

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Offset: constrain to the ends of an offset spline (#2424)

An associated offset spline hid all of its generated fit nodes, its two
end points included, so nothing snapped to them, and a curve drawn from
one shared the node and was refused ("invalid offset output point roles").

- An open offset's end points are shown and snapped to again; its
  interior fit nodes stay private.
- After every sketch edit, a curve that took an offset node gets its own
  point there, coincident with the node: the offset keeps sole ownership
  and the curve follows the offset when its source moves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Scenario: lines snap to and close onto an offset spline's ends (#2424)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:43 -04:00
bherbruckandClaude Sonnet 5.5 9eb1540a34 Docs: describe SolidCraft as independent CAD (#2768)
Reword comments, docs and package descriptions so they describe SolidCraft's own behaviour instead of comparing it to another product. The trademark notice, the commercial-CAD rule and the navigation preset name stay as they were.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 21:16:11 -04:00
JIJINBEI 932efbf341 Sketch drag: move only what the constraints need (#2060)
Thanks @jijinbei.
2026-10-18 02:23:24 -04:00
JIJINBEI 2acc344aa4 Sketch: show open and untied profile ends (#2000) (#2001)
Thanks @jijinbei.
2026-10-17 18:52:12 -04:00
Mateusz Sych a2245b2f51 Sketch profiles: a line passing next to a junction splits the loop it crosses (#755) (#1879)
Thanks @SychPL.
2026-10-17 04:08:43 -04:00
midasdf bbd4f29ebb Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)
Thanks @midasdf.
2026-10-16 06:26:27 -04:00
midasdf 07da7f8065 Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)
Thanks @midasdf.
2026-10-16 03:26:20 -04:00
Mateusz Sych 571122c4ba Motion Trace: a point's path as a joint is driven or a study plays, kept as a 3D spline (#1529)
Thanks @SychPL.
2026-10-16 01:54:34 -04:00
Karl Von Richter 371578a06f Feat/Sketch: associative pattern tools with independent directions and Flip/Center controls (#1601)
Thanks @Karl-VonRichter.
2026-10-16 00:32:32 -04:00
DuBearte 987f0be21e Sketch: infinite construction lines (#1359) (#1547)
Thanks @DuBearte.
2026-10-15 22:54:16 -04:00
bherbruckandClaude Opus 5.5 843c548589 Copy, cut and paste sketch geometry (Ctrl+C/X/V, context menu) (#1500)
* Copy, cut and paste sketch geometry (Ctrl+C/X/V, context menu)

Sketch geometry had no copy or paste: Ctrl+C / Ctrl+X / Ctrl+V arrive as
clipboard events that nothing handled, and the sketch context menu had no
Copy, Cut or Paste.

- sketch.copy / sketch.cut / sketch.paste: lines, arcs, circles, ellipses,
  splines, conics, points and text. Constraints and dimensions wholly among
  the copied entities come along (each dimension gets its own parameter
  with the same expression); ones that reach outside, fixes and pattern or
  offset relations are dropped. Paste goes centred at `at`, by
  `translate`, or offset from the original (same sketch) / at the same
  coordinates (another sketch, on its plane). One undo step; the pasted
  geometry is selected.
- Ctrl+C / Ctrl+X / Ctrl+V in a sketch (paste at the cursor), and Cut,
  Copy and Paste in the sketch context menu. Outside a sketch Ctrl+C /
  Ctrl+V copy and paste the selected timeline features. A copy also puts a
  line of text on the system clipboard so the next Ctrl+V is delivered.

Fixes #1480

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Keep a pasted text's height and angle expressions, drop its place's

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 15:55:10 -04:00
NOWN-DEVandNOWN-DEV b6806b16cf feat: a sketch text's height, place and angle can be expressions (#1453)
A sketch text's height, place (x and y) and angle can each be an expression over the design's parameters, and the text follows parameter changes, undo and reopening. Closes #1362.

Co-authored-by: NOWN-DEV <NOWN-DEV@users.noreply.github.com>
2026-10-15 14:57:36 -04:00
bherbruckandClaude Opus 5.5 ef53bc46f3 Sketch: the first dimension scales a sketch drawn by eye (#1365) (#1416)
* Sketch: the first dimension scales a sketch drawn by eye (#1365)

Lines drawn by eye have no size of their own until a dimension gives them one, but the first
dimension kept every other drawn length and distorted the sketch to fit (a free construction
line through the origin turned instead of the shape moving). The dimension tool now scales
the whole sketch about its origin to the first length dimension, as long as nothing in the
sketch fixes a size yet: no other driving length dimension, nothing fixed, projected or
patterned. Every geometric constraint and angle holds on the scaled sketch. Later
dimensions size what they measure as before; sketch.dimension does this only with
scale_sketch: true, so scripts are unchanged.

Fixes #1365

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Scenario s01: dimension the box's height too, now that the first dimension scales the sketch

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 13:13:14 -04:00