Commit Graph
1077 Commits
Author SHA1 Message Date
1cd9983c8f Surface trim: projected curves, several kept regions, mutual trim (#767) (#1466)
* kernel: trim keeps picked regions, mutual trim, curves swept along a direction (#767)

Trim moves to surface_trim.rs: TrimKeep::Side (the old behaviour) or
Regions (the connected pieces the points pick, parted where the tool runs
along an edge). mutual_trim cuts two one-face surfaces by each other's
surface, extending one that stops short when asked. SplitTool::Curves takes
a sweep direction; a closed curve's field is signed by inside/outside
instead of extending its end segments.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: classify display edges of a face with a closed-edge hole without a panic

A hole cut by a closed curve is a loop of one edge that starts and ends at
one vertex; mapping the face rebuilt that edge through a check that
panics on it (the guard caught it and dropped every smooth flag of the
body). Such faces are now left out of the ruled-surface test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.trim: keep several regions, trim by projected sketch curves, mutual trim (#767)

keep takes a list of points (the regions they pick); curves: {sketch,
curves?, direction?} sweeps sketch curves onto the surface (along the
surface's normal: not supported yet); with + keep_with trims two
surfaces by each other, extend? meets a short one, stitch? sews the
kept pieces. Trimmed faces carry their lineage, so they are named
after the faces they are pieces of. New fields noted in a pending format file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Trim dialog: sketch curves as the tool, several keep points, mutual trim (#767)

The tool input takes sketch curves too; keep points are places (several
on one face add up); another surface with its keep points makes a mutual
trim with Extend to meet and Stitch toggles. Edit Feature brings it all
back. Labels in every locale catalog.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ROADMAP: M8 trim by projected curves, several regions and mutual trim (#767)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:02 -04:00
e4d9015f68 sketch: points placed by expressions (#2864)
* Sketch points placed by expressions over the design's parameters

A point typed as an expression ("W", "H / 2") in sketch.point, sketch.line and
the other point arguments is fixed where its expressions come to, and moves
there again before each solve when the parameters change: an outline that
follows its parameters needs no dimensions and no solve per change. The
expressions are saved with the point (one pending design-format change), listed
with the sketch's other expressions, and renamed with their parameters; one
that cannot be worked out is refused.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Sketch point expressions: accurate params doc, out-of-range regression test

The sketch.line params said every point argument takes expressions; only those that
also take a point id do (the rectangle corners, an arc's through point and the like
are plain [x, y]). PointExprs' comment called its expressions mm. A test covers a
parameter that puts a placed point out of range and a design file whose point
expression overflows: both are errors, not crashes, and the sketch recovers.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 13:05:28 -04:00
SS-EN fb82ccb273 Timeline/MCP API: suppress lists, dotted edit keys, set_parameter expression (#2899)
Timeline and MCP edits take suppress lists, dotted edit keys and parameter expressions.
2026-10-19 10:14:23 -04:00
SS-EN 3115c50359 Chamfer: two distances and distance + angle on curved edges (#2893)
Two-distance and distance + angle chamfers work on curved edges.
2026-10-19 10:14:18 -04:00
fkirill 5bed5196c7 Fix lens-profile cuts into revolved quarter spheres (#2791)
Lens-profile cuts into revolved quarter spheres now build (#2750).
2026-10-19 10:14:12 -04:00
takuto-NA b76302e850 Assembly: reuse reference meshes during rigid joint motion (#2922) (#2924)
Thanks @takuto-NA.
2026-10-19 09:15:26 -04:00
SS-EN 771f62be71 Interference: clear apart pairs from their meshes, intersect the rest in parallel, time budget (#2895)
Thanks @SS-EN.
2026-10-19 09:14:52 -04:00
SS-EN 7fd51ce6a5 timeline.roll_to: accept "end", refuse other non-number positions (#2902)
A position that is not a number or "end" is now refused instead of moving the marker to the end.
2026-10-19 08:18:01 -04:00
rlartot aef13b52f4 Pattern and Mirror copies of a primitive change only the seed's targets (#2755) (#2756)
Thanks @rlartot.
2026-10-19 07:44:40 -04:00
takuto-NA 3a9b053f5b Fix constrained point dragging within the shared frame budget (#1976) (#1977) 2026-10-19 07:24:04 -04:00
amolinari-autotex aaa35a94d8 Relink a linked assembly source from the Browser (#2772) (#2773)
Thanks @amolinari-autotex.
2026-10-19 07:14:33 -04:00
Jacques 34cb3167b6 Sketch: trim keeps the rest of a dimensioned line where it was (#2910)
Thanks @Jacquesvdberg92.
2026-10-19 06:44:50 -04:00
NOWN-DEV 768e69c4c7 Joints: a new joint between faces that already meet leaves the part as it is (#2709) (#2710)
Thanks @NOWN-DEV.
2026-10-19 05:54:21 -04:00
NOWN-DEV c66e33284b Joints: offsets, angles and values typed as expressions follow their parameters (#2385) (#2386)
Thanks @NOWN-DEV.
2026-10-18 22:13:13 -04:00
NOWN-DEV 57d210130c Assembly: place an occurrence or an inserted STEP file by a matrix (#1890) (#1901)
Thanks @NOWN-DEV.
2026-10-18 22:03:20 -04:00
CypherNaugh_0x 8e762fee57 Add optional ambient occlusion and graphics quality presets (#1135)
Thanks @CypherNaught-0x.
2026-10-18 21:29:03 -04:00
phanoob 6b1fc16d47 Sketch projection: a solid's edges come in as their exact curves (#1508)
Thanks @phanoob.
2026-10-18 21:23:11 -04:00
bherbruck 2aa808b116 Merge pull request #2303 from tangency-labs/sketch-grid
Sketch: always show a grid on the open sketch's plane
2026-10-18 21:16:52 -04:00
leValdemar19andClaude Opus 5.5 86b2b97d6f Sketch Offset: constrain to the ends of an offset spline (#2424) (#2615)
* claim: #2424

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Offset: constrain to the ends of an offset spline (#2424)

An associated offset spline hid all of its generated fit nodes, its two
end points included, so nothing snapped to them, and a curve drawn from
one shared the node and was refused ("invalid offset output point roles").

- An open offset's end points are shown and snapped to again; its
  interior fit nodes stay private.
- After every sketch edit, a curve that took an offset node gets its own
  point there, coincident with the node: the offset keeps sole ownership
  and the curve follows the offset when its source moves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Scenario: lines snap to and close onto an offset spline's ends (#2424)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:43 -04:00
c177adfceb Clearance: check a shared volume against the union, allowing for the bodies' measuring error (#2090)
* Clearance: check a shared volume against the bodies and their union

An intersection can come out well formed and still wrong: one of a
mirrored pair of imported parts shared three times the volume of its
twin. The shared volume is now compared with vol(a) + vol(b) - vol(a ∪ b),
on the same (cut down) bodies; when they differ by more than 1 % (plus the
bodies' own measuring error), the pair is reported unchecked with both
numbers. Where the union gives no answer, the intersection stands.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Clearance: let the union cross-check allow for the bodies' measuring error

vol(a) + vol(b) - vol(a ∪ b) is a difference of measured volumes and
carries the error of all three, so correct small overlaps on large bodies
came back unchecked (0.96 mm³ where the union implied -0.75). measure
keeps a face's fine tessellation when it is within 1 % of one with a
5 times coarser chord, so a measured volume can be off by up to 0.25 %:
the allowance is now 1 % of the larger of the two answers plus 0.25 % of
the three volumes. Past it, a union that implies nothing (within that
noise of zero, or below it) while the shared part is at most a tenth of
the smaller body cannot tell, and the shared part stands. A shared part
of 412 mm³ where bodies of a few thousand imply 141 is still caught.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Clearance: tighten the union check's measuring allowance to 1e-4

The old note cited measure's 1 % gate, which compares face areas, not
volumes, and its 0.25 % was about 100 times the disagreement the bodies'
measures actually show. The allowance is now justified from volumes: a
curved face's chord shortfall cancels between a body and the union except
where the chord changes, which stays near 2e-5 of the three volumes; 1e-4
leaves five times that. A 40 mm roller pressed 0.2 mm into a 2 m plate
exercises it: with no allowance the pair is left unchecked (7.52 mm³
measured against 8.16 implied), with it the overlap is reported.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 21:16:37 -04:00
JIJINBEIandClaude Opus 5.5 7ad5130cd2 refactor: geom::UnitVec3 for unit axes and normals (#2603)
* geom: UnitVec3; a face's analytic axes and normals are unit by type

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: UnitVec3 adds to and subtracts from a Vec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, doc, engine: cylinder axes and measured normals held as UnitVec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, engine: functions that take a unit axis or direction say so by type

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: a face's normal goes to Plane::from_normal as is

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, doc: main's new cylinder helpers take the face's axis as a UnitVec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:31 -04:00
bherbruck 46bc44b706 Merge pull request #2821 from tangency-labs/ci-faster-shards
CI: faster test shards
2026-10-18 21:16:14 -04:00
bherbruckandClaude Sonnet 5.5 9eb1540a34 Docs: describe SolidCraft as independent CAD (#2768)
Reword comments, docs and package descriptions so they describe SolidCraft's own behaviour instead of comparing it to another product. The trademark notice, the commercial-CAD rule and the navigation preset name stay as they were.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 21:16:11 -04:00
fkirill 9ee2de9a0f Fix drilled hole cuts through tapered walls (#2387) (#2401)
Rebase the complete PR change onto current main, preserving changes previously stored in merge commits.
2026-10-18 21:16:06 -04:00
NOWN-DEVandClaude Opus 5.5 ed64988d8f Joints: a round origin keeps its end when the face it opens onto gets other neighbours (#2760)
A round origin's end is kept by the name of the face across the rim. On
a face in pieces (a sheet split by a groove or a bend) that name lists
the faces round the piece, and when those change (a hole nearby moves
or goes) the name matched neither rim, so the end fell back to the
nearer end of the stored pick: a pick near one end of a thin wall that
the design moved past mid-wall turned a part through 180 degrees. The
end whose rim matches the name better now wins: the face itself, a face
merged into it, then a piece of it, then the same face by its stem.

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-18 21:16:01 -04:00
bherbruckandClaude Opus 5.5 2452513b65 CI: faster test shards
- Pull requests that can change a robustness golden check every seed but the 17 slowest, in the
  same nextest run as the other tests instead of a second step after it (16-30 minutes on its own).
  The slow seeds (about four fifths of the goldens' time) still run in the merge queue, on main and
  nightly. A failed golden still prints how to re-record it, and junit.xml now holds the whole run.
- The slowest tests start first (nextest priority), so a shard no longer ends with one of them
  running alone.
- tspline::tests::hostile_tsplines_never_panic joins the heavy tests pull requests skip (up to
  12 minutes on a GitHub runner; the same kind of check as hostile_params_never_panic).
- The ci profile builds dependencies without line tables: the test archive pull requests' shards
  download goes from 3.4 GB to 2.2 GB.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 00:36:14 +00:00
bherbruck 36aa4a15fe Merge remote-tracking branch 'origin/main' into sketch-grid 2026-10-18 23:52:12 +00:00
bherbruckandClaude Opus 5.5 e887792182 Fix orbit about the picked point (regression in 0.16.0) (#2753)
Orbiting about the point under the cursor (or the origin) turned the camera
about its target and then panned to put the pivot back. The pan works at the
target's depth with the parallel-view scale, so in a perspective view the
pivot slid off its pixel and the model swung about the camera.

The camera now turns rigidly about the pivot: Camera::orbit_about keeps the
pivot's coordinates in the camera's frame and rebuilds the target from the
new orientation, so the pivot stays exactly on its pixel in both projections.
The Shift snap spring and view.navigate's pivot orbit use the same.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 22:51:37 +00:00
6d410c342c Joints: origins on an edge of a face, at its middle or a corner (#2403) (#2404)
* Joints: a face or circle origin keeps its turn as the face tilts

A face- or circle-centre joint origin worked out its frame's x from the normal alone
(`Vec3::any_perp`), which switches axis where the normal crosses 0.9 along X: a part on a face
tilted past about 64° by a parameter spun a right angle about the face. New origins keep the x
they have when picked (`x`, component coordinates) and each solve lays it onto the face as it is
now, so the part tilts with the face without spinning. Origins saved without it are placed as
before.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Joints: origins on an edge of a face, at its middle or a corner

`joint.origin` and `joint.create` take `edge: [x,y,z]` (a point on an edge of a planar face),
with `on` (which face; default the larger planar face beside it) and `corner` (the end near that
point). The origin sits at the edge's middle (z out of the face, y into it) or at the corner (x
and y along its two edges into the face, right-handed whichever way the edges run). The edge, the
face and the corner's other edge are kept by name and found again on every solve, so a part set
40 mm in from a panel's corner stays there when the panel changes size; a name that finds nothing
leaves the joint out with the reason.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 18:10:28 -04:00
Artem Sushchev f5a868efda Fix red main after #2247: record its robustness seeds, and keep older designs' joins of split pieces working (#2540)
#2247 changed 16 robustness seeds (bodies N -> 1, and some seeds then build
different steps; seed 54's new shell fails on #2247's parent too). Recorded
on Linux.

Designs saved before #2247 that combined a split-off piece by name (tools
Posts, Posts (1)) failed on the missing piece and left both posts off the
case. A combine now skips a missing `X (n)` when `X` is a tool too or the
join's target, with a warning. Format note for the meaning change.
2026-10-18 13:10:09 -04:00
NOWN-DEV 8313c3468a Joint origins: resolve by the named face, keep a hole's end and the turn (#2186) (#2187)
Thanks @NOWN-DEV.
2026-10-18 13:08:23 -04:00
Yuto Nakamura e766fb14fb Preserve warm assembly caches across Save As renames (#2120)
Thanks @yutyan0119.
2026-10-18 12:11:56 -04:00
Loohi 9c7afb6076 Single hole follows its sketch point (#2110) (#2336)
Thanks @Loohi.
2026-10-18 11:35:15 -04:00
N3MI-DG 3eeb20d2bd Browser: hidden items grey out, and folders keep their own visibility (#2308)
Thanks @N3MI-DG.
2026-10-18 11:34:55 -04:00
Vodmordia 55bfeb71a7 Plastic dialogs: dimension fields show their units (#1936) (#2107)
Thanks @morelandjo.
2026-10-18 10:30:52 -04:00
H. Conrad 4e0601611c Fix id overflow (#1589)
Thanks @Ian-cmd-ops.
2026-10-18 06:53:57 -04:00
Brazz 07708a4e2a Extrude: a taper composes with a start offset (#2312) (#2313)
Thanks @acbrazzl.
2026-10-18 06:18:43 -04:00
Artem Sushchev a4c4b411e5 Combine: a cut keeps a body joined from separate pieces in one body (#2247)
Thanks @H1D.
2026-10-18 06:02:44 -04:00
DuBearte e70bd52409 Extrude: a side drawn in collinear pieces is one face (#1788) (#1949)
Thanks @DuBearte.
2026-10-18 05:43:23 -04:00
292747e50b Persistent face names: keep exact history when a prism boolean meets stacked pieces of one cylinder (#1209) (#2205)
* claim: #1209

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011YdMi9BDdjWZ8twfeBHAXz

* Prism boolean: a curved edge at one level crosses the walls there only (#1209)

The prism boolean sews its result slab by slab and keeps, for each section segment, the operand
wall it was read beside; its history is built from those tags. `Stations::new` took every curved
edge between two walls as crossing them at every level, so where two pieces of one cylinder are
stacked (an arm's round end under a boss of that radius) the circle between them cleared the
wall tags of every slab. `prism_lineage::sewn` then gave up, the join or cut came out with no
history, and every face of the body was named from geometry (`exact: false`).

A curve whose control points lie at one level (a B-spline, or a NURBS curve with positive
weights, which lies in their convex hull) is at that level: it crosses the walls there only.
Any other curve still spans every level.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011YdMi9BDdjWZ8twfeBHAXz

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 05:33:30 -04:00
83c31d77c4 surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)
* feat(geom): surfaces through curve networks, and spline spaces to build them

Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges

kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry

BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(kernel): G2 boundary surfaces against a body's face

The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(kernel): a boundary patch with straight corners measures its own area

A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)

A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(doc): boundary surfaces through curve networks and loops of three or four

FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(engine): surface.boundary through loops of three or four and curve networks

The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).

Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(ui): Boundary Surface dialog

Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(oracle): a boundary surface through a loop, thickened (#763)

Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* refactor: boundary surfaces, review cleanups

Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-17 21:47:38 -04:00
bherbruckandClaude Sonnet 5.5 a940f77447 Sketch: always show a grid on the open sketch's plane
While a sketch is open its grid is drawn on the sketch's own plane, centred
near the view target and snapped to the major step, whatever the Grid switch,
the sketch's Sketch Grid option or Grid follows the view say. Headless window
pictures follow. Outside a sketch nothing changes.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 01:44:15 +00:00
JIJINBEI 2acc344aa4 Sketch: show open and untied profile ends (#2000) (#2001)
Thanks @jijinbei.
2026-10-17 18:52:12 -04:00
Koschtetnix 487aa64e10 Multi profile extrusion performance (#2064)
Thanks @Koschtetnix.
2026-10-17 18:30:52 -04:00
Pablo López cb857f1fa7 Rib/Web: grow along the sketch normal (#2056) (#2057)
Thanks @pablopeza.
2026-10-17 14:15:03 -04:00
bherbruckandClaude Opus 5.5 e347f820e6 Fix red main: give inspect.silhouette an icon; scroll to Colour vision in its scenario (#2134)
Preferences > Graphics grew a row (Grid follows the view, #2035), so the Colour vision
control now sits below the fold of the fixed-size page; the scenario scrolls to it.
The page itself already scrolls for real users.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-17 13:53:01 -04:00
Mateusz Sych 4a70c03deb Revolve: a profile that comes back to the axis along a curve revolves right, and cuts with it work (#1853) (#1866)
Thanks @SychPL.
2026-10-17 13:38:41 -04:00
fkirill f480898158 Extrude: join extensions of ribs on curved bases (#2059) (#2082)
Thanks @fkirill.
2026-10-17 13:33:21 -04:00
JEREMY 843fa0dac6 Grid: hysteresis and no wall swap at the 45° crossing behind Grid follows the view (#1993) (#2050)
Thanks @jeremymiribung-blip.
2026-10-17 12:51:38 -04:00
fkirill 2c924fd385 Sweep: close circular tools before cutting a torus (#2005) (#2010)
Thanks @fkirill.
2026-10-17 12:46:21 -04:00