* Links: update linked designs that changed while the assembly's tab was away
A design coming back to its tab compares the modification time and size of its linked
design files with what they were when it went to the background, and runs Update Links
on the worker thread for those that changed: saved in another tab, another window or by
a checkout. Preference update_changed_links (Design, Linked designs) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the assembly guide says linked designs update when their tab returns
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: Vietnamese strings, now that vi is a complete catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: remember what each design last read, so an update that fails is tried again
A design's linked files are now recorded as the design last read them: when Update Links reads a
link without an error, or when the link is first seen. Coming back to the tab reads again what
differs, one link per run, so a file that cannot be read holds up no other and is tried again
the next time, and a part changed while the assembly was shown is taken up on its next return.
Closing several tabs together reads nothing on the way, and the web build, which keeps no file
times, looks at nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: no read during a save-changes prompt, records for adopted designs and missing files
A tab shown to answer "save changes?" reads no link before its save, and Cancel there or on a
batch lets the tab left in front read what it skipped. A design opened in place of the blank one
records its links at once, a link whose file is missing is recorded as missing so it is read when
the file comes back, and a read queued for a design that is no longer shown by the time it starts
is dropped. More changed links than can wait at once are read on the next return.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assemblies: edit a linked component in place, with the assembly around it
Activating a linked component opens the design it comes from in a tab of its own, with the
rest of the assembly drawn faded around it where the component sits, so the part's own history,
browser and commands are at hand. Finish Editing in the browser saves the part, goes back to the
assembly and closes the part's tab when the edit opened it; coming back to the assembly updates
the changed link (or Finish Editing runs Update Links when that is turned off). Update Links in
the part also reads the assembly's links again, off the window thread, and redraws the assembly
around the part; a result for an assembly changed meanwhile is dropped with a message.
The part is an ordinary tab, so saving, autosave, recovery, closing and quitting treat it as any
other design. The model scene's ghost triangles are now drawn (only the preview's were).
Preference edit_linked_in_place turns it off. Builds on the update of changed links when an
assembly's tab returns.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: a double-click opens it, Activate only activates
A double-click on a linked component edits it in place, in the browser as on a face in the
view (around the placement clicked), and the component's menu gets Edit in Place. Activate and
the browser's radio button make it the active component as they always did, so a linked
component can still be activated without opening its design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Double-click on a component's face: edit a linked one in place, activate any other
A double-click on a face in the view activates the component the body belongs to, at that
placement, as a double-click on its row does; a linked one is edited in place. Bodies of the
design itself or of the active component are left alone, and so is a double-click with a
modifier. One preference, double_click_components, covers both gestures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from review
An edit whose part never opens is forgotten instead of starting on a later open of the same
file, and the web build starts the edit after its synchronous open. Finish Editing goes on only
for a save into the linked file and in the part's own tab, waits for a "changed on disk"
answer, and says so when the part was saved elsewhere. Showing the assembly no longer drops a
refresh, which now records the links it read so coming back reads nothing twice. The faded
assembly is worked out once per picture, a bad mesh index skips its whole triangle, and the
last two status texts come from the catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: Finish Editing on the MODEL tab and the mouse's back button
Finish Editing is a command now, component.finish_edit, with its schemas: the app window
answers it, anywhere else nothing changes, as with view.fit. While a linked design is edited in
place the MODEL tab ends with a FINISH EDITING panel, pinned at the right as FINISH SKETCH is,
with a new left-arrow icon; the browser keeps only the line naming the assembly. The mouse's
back button, or a keyboard's Back key, finishes too unless a dialog, tool or sketch is open.
The assembly guide describes editing in place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the second review
Saving the assembly waits while it reads its links for the part
Finish Editing waits for dialogs, tools, sketches and prompts open in the part, also when run as a command
The assembly reads the edited part explicitly when it does not check its links on its own
The FINISH EDITING panel cannot be customized
A tab opened by an edit stays that edit's to close when the part is entered again
The mouse's back button finishes editing; the keyboard's only while no text field has focus
Refreshing the assembly keeps its selection and active component
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the third review
component.finish_edit run as a command opens nothing and answers with an error when it cannot finish; engine.batch and engine.script refuse it
A double-click or Edit in Place while a dialog, tool or sketch is open in the assembly keeps it open
What changes in the assembly while it reads its links without changing its document stays: picks, activation, components dragged but not captured
Showing the assembly while it reads its links starts no second read
A new or opened design in the part's tab ends the edit
Finish Editing keeps the part's tab open while its agent chat runs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: Update Links run as a command in the part refreshes the assembly too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: the ribbon button reads Finish Edit, as Finish Sketch does
A bare "Finish" took the catalogs' surface-finish translation (German "Oberfläche").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the fourth review
Finish Edit waits while the part's agent is in the middle of its turn, instead of keeping the tab of any chat open
A part saved while its assembly refreshes is read again when the edit finishes: the refresh records the files as it found them
A double-click on a linked component while something is open in the assembly says so instead of activating it
Commands are recognised in any spelling the engine takes, so engine.batch and engine.script cannot slip Finish Edit through
Update Links run as a command refreshes the assembly from the control channel only, not for the app's own reads
Moves of components the refresh removed are not carried over, and a refusal is one message
The command description and the guide say that the command does not save the part
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: the command is Finish Edit, as Finish Sketch is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: a command to start it, and fixes from the full review
Added component.edit_in_place {component, path?}: the double-click and Edit in Place in the menu run it, and as a command it asks nothing, so a network location not allowed yet or a design open elsewhere makes it fail instead
Finish Edit asked by the part's own agent finishes once that agent's turn ends; the button still waits for the turn
The parameters and design properties panels, with text typed and not applied yet, hold up entering and finishing an edit
A refresh is not taken up under an undo, a queued command or a feature still being computed in the assembly
Refusals say what holds them up (a refresh, a file being read or written) instead of nothing
The browser strip names the assembly that is refreshing, not any assembly
The schema description says the command does not save the part
Korean strings for every new message
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the second full review
The MCP batch tool refuses component.edit_in_place and component.finish_edit as steps instead of sending them one by one
Edit in Place asked while the assembly's agent is in its turn opens the part once the turn ends; a double-click then is refused rather than stopping the agent
Both commands answer queued: true when they wait for the agent's turn, and stopping the agent forgets what it queued
An undo, a queued command or a delete check running in the design holds up entering and finishing an edit
A refresh redraws every edit of the assembly, the parts in other tabs too
In an assembly never saved, a double-click activates the linked component as before
The control and MCP docs list the new batch and script refusals, and the commands list every way they fail
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the third full review
The MCP batch tool refuses the two commands however a step names them, an execute step too
A queued Edit in Place is checked fully when asked for, a second one is refused, and both queued requests wait for what runs in the design instead of being dropped
Disconnecting the agent forgets what it queued, as stopping it does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: help text for the Finish Edit button
main now requires help for every toolbar command (#7134), and Finish Edit
is one. Written in every language the branch's catalog carries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7181
* MCP save: a folder the agent opened or saved a design in stays in scope (#7181)
The agent's default folders held the open design's folder only while that
design stayed open there, so after a new design, an opened STEP file or a
save-as elsewhere a save beside the earlier design was refused, while the
same save through the control port worked.
The MCP server now keeps, for the rest of its run, the folder of every
design file a call opened or saved (open, save, and doc.open, file.save,
file.save_as through execute or batch, path given in full) and, headless,
of every design open in its session. Such a call only succeeded because the
folder was already in scope, so naming a path adds nothing. The folders get
the open design folder's terms (inside home or temp, not hidden, hidden
entries unreachable), at most 16. Bridged, they go to the app as
design_folders, which it judges the same way.
The save tool description and docs/mcp.md say how to add a folder with
--allow-path.
* MCP scope: a design's folder is the folder its file resolves to (#7181)
A link in another folder to a design inside the agent's folders passes the
scope check, which follows it, but its own folder was what got remembered
(and, for the open design, what counted while it was open). Take the folder
of the file as the check resolves it.
* Control test: a hidden file the export format accepts (#7181)
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* claim: new designs save as .sc
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* New designs save as .sc; .solidcraft files still open and keep their name on Save
DESIGN_EXT is now "sc"; DESIGN_EXTS lists sc, solidcraft and solvecraft and
every open path (dialogs, drag-drop, recent files, CLI, MCP, links, the web
picker) accepts all three. Save of an opened .solidcraft file writes that
file; Save As, autosave, recovery and crash reports use .sc. Windows, macOS
and Linux register .sc alongside the older extensions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Update UI tests for the .sc default extension
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5853
* Batch: refuse a step that would fail at its turn before the first step runs (#5853)
engine.batch and the MCP batch tool checked only a batch's shape up
front. A misspelled command id in a late step was found at its turn,
after every earlier step had run, and then all of it was rolled back: a
160-step batch with a typo as its last step ran for a minute and
changed nothing.
solidcraft_engine::batch_preflight::check finds, before anything runs,
the first step the batch would certainly refuse at its turn: a step
without a command, an unknown command id (the error names the closest
ids, as at the step's turn) or, with strict parameter checking, a call
that breaks its command's typed contract. Anything that depends on the
design is left to the step's turn.
- engine.batch (control channel) checks against the app's registry and
its session's level; view.pick, which the app answers itself, passes.
- The MCP batch tool checks when the commands run in its own process
(headless, with --param-check from the backend). A running app may be
another version with other commands and checks the batch itself; its
reply's not_run is passed on.
- The refusal is the failing step's reply with completed 0, undone 0,
not_run listing every step and a note.
Tests that used an unknown command only to make a late step fail now
use a step that fails at its turn (a bad extrude distance), so they
still test rollback, timings and file.new as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Every new command comes with input and output schemas
A test fails for a command without a contract or an output type, unless it is a planned!
placeholder or listed in schema/unconverted.txt, which holds the 400 commands that predate
the rule and only shrinks: the test also fails when a listed command has its schemas, when
the list names a command that doesn't exist, or when it isn't sorted.
`checked!` now takes only the command's id and checks the contract that id publishes
(`run_checked_as`), so the contract enforced is always the one described. Another test runs
every command that has a contract in strict with an unknown key, so a contract is never
published without `checked!`, under the command's own id, enforcing it.
A new book page, Command schemas, explains how to write a contract and a reply type, the
tests to add, the shared field types and how to add one, with a checklist; the failure
messages point to it. "Adding a command", CONTRIBUTING.md and AGENTS.md now include the
schemas, and the MCP tool description and docs/mcp.md no longer list the converted commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* List the commands added on main since: view.layout, view.history_layout, view.normal_to
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Command schemas guide: what participants and targets do, checking the evaluation, warning-free replies
- `participants` changes the result for some features and nothing for others; where it and
another key override each other, or where it has no effect, say so in that key's
description or in the summary.
- The example primitive's `targets` default to every body in the feature's component, not the
bodies it meets; they're ignored when `participants` lists bodies.
- Check what each value does where the feature is evaluated, not only how the handler reads it.
- A reply test runs every form in Warn and checks for no `param_warnings` (Strict for a reply
that isn't an object).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* List the 43 commands added on main since: frame, component, render and others
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* List the 11 commands added on main since: browser folding, standard views, parameter sweep, path flange
browser.collapse_all, browser.expand_all, inspect.parameter_sweep, sheet.path_flange and the
seven view.* standard views (back, bottom, front, isometric, left, right, top) landed on main
without schemas; the gate flags them, as intended. 457 commands listed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Schema rule warns instead of failing for now
A command without input and output schemas prints a warning listing it
(test output and a CI annotation). SCHEMA_RULE_STRICT in coverage_tests.rs
(or SOLIDCRAFT_SCHEMA_RULE_STRICT=1) makes it fail again. Docs say "should,
and will become required".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #3983
* Agent skill for reproducible bug reports (#3983)
skills/solidcraft-reporting has an agent gather the version, steps and
exact error, reproduce the problem in a fresh design (a command script or
one batch with rollback off), shrink it while it still fails, check the
numbers with measure and a screenshot, keep private designs out, search
for duplicates, and write the report in one shape: Reproduced on, Steps
with a minimal script, Expected, Actual, Attachments.
Listed in skills/README.md and docs/mcp.md; the bug template's steps
field points agents to it. The skill-name check now covers its files.
* Reporting skill: GitHub takes a design only as a .zip
solidcraft-cli mcp setup (alias install) and Help > Connect AI assistants edit each installed
client's own configuration in place, with this program's absolute path: OpenCode, Claude Desktop,
Claude Code, Cursor, Codex, Gemini CLI, Copilot CLI, Windsurf, Zed and VS Code. Only the solidcraft
entries change; a stale path is refreshed and an entry the user changed is left alone.
Plain mcp keeps looking for the app while its headless session has no work, and says on every
tool result that it is headless when the app was not found.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5822
* Batch: consecutive parameter edits can rebuild the design once (#5822)
An agent's batch of parameter edits, one parameter per step, evaluated the
design once per edit: an edit early in the timeline rebuilds nearly all of
it, and 21 such edits ran for minutes.
engine.batch and the MCP batch tool take coalesce_parameters (default
false). With it, each run of consecutive plain parameter edits
(parameters.change with only a name and an expression, or with changes) is
set as one parameters.change {changes}: one rebuild for the run. Any other
step ends a run, so later steps see the design up to date. Every step
still gets its own result (coalesced: the run's length); the run is one
undo step. A run whose combined edit is refused (a new parameter, which
changes can't make; a bad expression) runs step by step, so a refused edit
is still named by its own step. The app's off-thread evaluation computes
the run the same way. The grouping is solidcraft_engine::batch_params,
shared by both runners.
21 parameter edits on a plate with 21 extruded bosses (in-process MCP,
ci profile): 40.1 s step by step, 3.5 s coalesced, the same volume.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Batch coalescing: say a run skips the states between its edits; test it against step by step (#5822)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6304
* view.pick: map screenshot pixels to exact geometry (#6304)
A read-only command that answers, for screenshot pixels (window or model
frame) or world-space rays: body, face index, exact world point and
outward normal, depth, occurrence/component for placed parts, and the
nearest edge/vertex within edge_px. Faces are raycast through the same
per-body pick index the mouse uses; flat faces are solved exactly
against their plane, curved faces take the mesh hit with the normal
interpolated from the mesh's surface normals. Section-aware: faces on
the removed side do not stop a pick and the cut cap answers with
section_cap. Never touches the selection, camera, document or undo.
Exposed as control ui.pick and as view.pick through engine.execute and
engine.batch (and through them MCP execute and batch).
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #4664
* Control: name the token file and spot a stale one when a call is unauthorized (#4664)
When the app refuses a token that the MCP client read from a token file,
the error now names that file, when it was written and how long ago,
without printing the token. The app also writes `<port>.pid` beside the
token file (its process id and, on Linux, its start time) and removes
both at exit; when that process has exited, the error says the token
file is stale. The process check runs only after a refusal, and the
token file itself stays one line, so existing clients keep working.
Document force-quit leftovers and the MSIX AppData redirection.
* Bench assistant: read the token out of the new ClientToken
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Rebased onto main as one commit (was 120d26f7, df488f9a, db9d1073 plus
merges of main).
- A request the app reports as still running (#1618) is waited for on the
same connection through `control.pending`; past the wait the error says it
was not cancelled and will still apply (or only write its file), later calls
are not sent behind it, and the new read-only `pending` tool returns its
result once it lands.
- A failed batch says what really happened: `rolled_back` only when the
design is back where the batch started (as #3288 / #3242 on main: the app's
`rolled_back` is believed; for an older app, every completed step undone;
only a rollback asked for is reported as one), plus `applied`, `not_run` and
`failed.still_running`.
- A batch step may name a tool (set_parameter, list_commands,
describe_command, execute, measure, inspect_design, undo, redo, export, save,
open, new_design, crash_reports); screenshot, body_topology, batch and
pending are refused before anything is sent.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4846
* MCP tools: unknown command ids suggest the closest ids (#4846)
An unknown command id in `execute` or `batch` now lists up to three closest
ids, and an id with parameters packed into it says to pass them in `params`.
* claim: #4966
* Agent chat: serve the bundled skills' reference through an MCP tool (#4966)
The bundled skills start with "read reference.md", but SolidCraft's own
chat turns the agent's file tools off, so its agent could not follow them.
The MCP server gains a read-only `skill_reference` tool that returns a
skill's documents from copies built into the binary. It takes a skill
name and a file name from a fixed list, never a path, and refuses an
unknown skill or file with the available ones. The skills point to it,
and docs/mcp.md and skills/README.md describe it.
* test(mcp): reproduce whitespace bypass of request-size limit
Add a source-level regression that rejects a JSON-RPC request larger than
MAX_LINE even when most of it is whitespace, plus bounded-stdio framing
coverage and invalid UTF-8 recovery.
* fix(mcp): bound stdio line buffering and validate raw request size
Consume oversize JSON-RPC lines in bounded memory while keeping the
following request available. Reject whitespace-padded lines before
trimming, preventing a request-size cap bypass.
* docs(mcp): keep server framing comment idiomatic
* claim: #3654
* Control channel: control.running lists what the app is running, across connections (#3654)
control.pending answers only for the connection that asks, so a second client,
the MCP bridge after a reconnect or a script saw {"pending": null} while the app
was busy. control.running answers for the whole app, the same on every
connection and at once (the connection's own thread answers it, also while it
is busy with a timed-out request): every request the app has been sent and not
answered yet, oldest first, with its connection, id, method, command id (or a
batch's step count), seconds since it arrived and whether it still waits its
turn. A timed-out request stays listed until the app answers it, also after its
connection closed. Parameters are never shown.
The window marks a request started when it takes it (ControlRequest.started),
which tells queued from running. The MCP server gets a read-only `running` tool.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
Build on #1426's import components and nested STEP assembly instances.
Replace placeholder solid labels with meaningful part or instance names.
Translate IGES groups and subfigure instances through the existing STEP
component path, preserving nesting and placements and sewing surfaces
within each group. Bound assembly walks and reuse work buffers.
Related to:
- tangency-labs/solidcraft#1386
- tangency-labs/solidcraft#1426
Co-authored-by: Codex <noreply@openai.com>
* claim: #3242
* MCP batch: rollback restores the design the batch began in (#3242)
A failed batch with rollback: true reported rolled_back: true even when the
design never went back. Two defects, both fixed:
- file.new (and any document-replacing command) replaced the session with it,
taking its checkpoints down too, so a batch that failed after file.new had
nothing to restore. Session::replace_design now carries the checkpoints over
to the fresh session: the checkpoint belongs to the batch, not to the
session that happened to be holding the document.
- rolled_back echoed the requested flag. It now reports whether the design is
actually back: the app answers engine.batch with a new restored field, and
the MCP tool reports restored && rollback. An app that predates the field
falls back to undone/completed.
* Batch: answer with main's rolled_back field after the merge (#3242)
Upstream #2900 put the real restore check on engine.batch as
`rolled_back` while this branch named it `restored`; the merge kept
main's control test and this branch's field, and CI caught it.
Standardize on main's wire name: the app answers `rolled_back`, the
MCP tool reads it (fallback for older apps unchanged), docs and tests
follow. The checkpoint carry-over across file.new is unchanged.
---------
Co-authored-by: DahakBuilds <dahakbuilds@users.noreply.github.com>
* joint.inspect: what each joint is attached to, for agents
A read-only `joint.inspect {joint?}` gives each joint's definition: for each
side the occurrence, its component and path, the snap as saved, and what
each persistent face/edge name refers to (the feature that made it, and the
sketch and curve a swept side came from), whether the origin resolves and
why not; plus kind, offset, angle, flip, values with limits, expressions,
the motion links it is in, and its solve errors and conflicts. Its id ends
in `.inspect`, so agent gates treat it as reading only.
MCP `inspect_design` includes the definitions when the design has joints
(`joints: false` leaves them out). joint.list and joint.inspect share the
motion-link JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: catalog entries for Inspect Joint (en, ja, zh)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Spike: typed parameter contracts and JSON Schemas for solid.box and solid.extrude
The schema RFC's spike (plan/schema-spike.md). solid.box and solid.extrude get
typed contracts with generated JSON Schemas (2020-12), checked in front of the
unchanged handlers by a per-session level: off (the default, which changes
nothing), warn (the call runs and gains param_warnings) or strict (the call is
refused and the design left alone). Also engine.describe and the MCP tool
describe_command, `solidcraft-cli mcp --param-check off|warn|strict`, a
FeatureResult type for feature replies, and an env-var audit recorder
(SOLIDCRAFT_PARAM_AUDIT) used to check the contracts against every test.
Local spike branch; not for upstream as is (see the results report).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameter contracts: put the audit recorder behind a feature; drop two ignored test keys
The audit recorder is now on only in a build with the engine's `param-audit` feature
and `SOLIDCRAFT_PARAM_AUDIT` set. Its code is still compiled, linted and tested without
the feature. `scripts/param_audit.py` summarises a test run's audit logs, and the schema
module's docs give the steps for converting a further command.
Two tests passed keys their command ignores, which the audit found: `position` on
`solid.box` (`hole_face_tests.rs`) and `symmetric` on `solid.extrude` (`face_tests.rs`).
Both are removed, so the tests build what they always did. Comments no longer call
the contracts a spike.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Snapshot: draw a see-through appearance see-through, and give the CLI --body, --tool and --section
A headless picture dropped a body's opacity: the scene carried only a colour, so a design with
a translucent appearance was drawn opaque by `solidcraft-cli snapshot`, by MCP screenshots and
in a design's thumbnail, although the window has always drawn it as glass. There was then no
way to look at the body a cut would remove inside the material it meets: only a volume to
measure and reason about, which hides exactly the errors a picture makes obvious (a tool that
stops short, or lands in the wrong place).
- `SceneMesh` carries the body's opacity; `view::build_scene` takes it from the design
(`model_body_opacity`), and a selected body stays solid so the selection colour reads.
- The GPU capture routes a see-through body into the scene's glass at its own alpha, as the
viewport does; the CPU rasterizer draws the solid bodies first (they own the depth buffer),
then the see-through ones blended over them, far sides before near sides and without writing
depth, so what lies inside shows and a line between the two is not hidden.
- `snapshot --body NAME:opacity=0.3,color=#rrggbb`, `--tool NAME` (that body solid in the tool
colour, the rest see-through) and `--section z=27` run the commands the app itself runs
(`appearance.assign`, `inspect.section`): the options are shortcuts, not a second renderer.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Tests: measure the tool colour as it is drawn through a see-through target
The tool-colour filter was derived on paper and demanded a red more than twice either other
channel, which the target in front of it tints away (measured: (200, 108, 85) through opacity
0.3); and the colour check painted the tool, which a solid target hides.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* fmt
* Snapshot options: strip the colour's # rather than slicing it; README
Slicing `value[1..]` on an input-derived string is what the house rules ask us not to write,
even where a length check has already made it safe. The error a failed assignment reports now
names the body rather than claiming it came from --body, since --tool reaches it too.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* --tool: assign the bodies around the tool in groups, not one command at a time
Each appearance.assign is an undo step with a document snapshot behind it, so one per body
made --tool cost grow with the size of the design for no reason: the bodies around the tool
all get the same opacity, and the ones that share a colour can be named in one call. A design
whose bodies all wear the default grey now costs two commands whatever its size.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Rasterizer: say where its glass and the GPU's differ
Splitting each see-through body by facing orders its own two layers; it does not sort across
bodies, which the GPU does. Worth stating rather than leaving a reader to find it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Reword comments, docs and package descriptions so they describe SolidCraft's own behaviour instead of comparing it to another product. The trademark notice, the commercial-CAD rule and the navigation preset name stay as they were.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
glTF files open, insert and drop like 3MF/STL/OBJ: a component named after the file, the node tree as nested rigid components, repeated meshes as occurrences, metres to mm, Y up turned to Z up by default (up: z keeps axes), materials as PBR appearances. Bounded, hostile-input tested reader; no new persisted data. Closes#1505.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Imports become components: a STEP assembly's tree as nested components (#1386)
Every imported file (STEP, IGES, 3MF, STL, OBJ: inserted, dropped, opened as a
design, or file.insert_step / file.insert_mesh / doc.open from scripts, the CLI
and MCP) now comes in as a new component named after the file, with its Import
feature inside it. A STEP assembly's products become nested components; a part
placed more than once is one component with an occurrence per placement, and
the Import feature skips the file's later copies (`skip`, format 21 note). The
contents are held as one rigid group (rigid joints, glyphs hidden); moving an
inner part is refused until component.unlock ("Unlock Contents") releases it.
Y up turns the import's component. Replies report component, component_name
and occurrence. Undo is one step; designs with loose imports are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep an import's rigid group hidden when the window loads the file in the background
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Import instances' skip list is format 22: format 21 ships in 0.12.0
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Catalog entries for Unlock Contents
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Measure now reads the picked item's exact shape (cylindrical faces, circular and arc edges,
sketch circles, arcs and lines, profiles, planes, points):
- A circle, hole or arc shows Ø, R and its length (circumference, or arc length and angle).
- A slot (a sketch profile, or a half-cylinder end of a slot in a solid) shows its width,
centre-to-centre length and overall length.
- Two items where one is round measure from the centre or axis by default (axis to axis,
axis to plane, edge or point), with the closest and farthest distances listed too; the
panel switches between centre, min and max, and the canvas line follows.
- inspect.measure and MCP `measure` (new `items` argument) add diameter, radius,
center_distance, min and max; existing fields are unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
solidcraft-cli snapshot takes --camera JSON and --view with a saved view name (through view.apply, as the MCP screenshot does), plus --no-grid and --no-axes; the MCP screenshot and ui.render take grid/axes, the headless render skips a hidden origin axis, and the app's ui.render follows the Grid and Origin switches. Closes#1245.
file.insert_step and doc.open on a STEP file take `up` (turn a Y-up file so its up is +Z) and `names` (names for the imported bodies). The MCP tool and the app's control requests pass them through; an import without them works as before. Tests in the kernel's STEP reader, the engine, MCP and the file-load UI; docs/step-import.md and docs/mcp.md describe both.
A solidcraft-mechanisms agent skill with a worked example that a test replays through the MCP server (the actuator follows the hinge with the stated stroke and the drive stops at the rod's limit); the skills index and docs/mcp.md list it.
The bridged MCP server starts when no app is listening, says so in its instructions and in each tool error, and connects on the first call after the app starts. A batch that could not be sent says the app is not running. docs/mcp.md describes it.
Lands the Render workspace (R3), bounded preview-image jobs with cancellation and atomic PNG export (R4a), and opaque PBR looks as one change.
- Render workspace: an overlay-free product preview on the installed GPU device. Returning to Design restores its camera. render.scene and render.settings.apply are added.
- Image jobs: render.preflight/start/status/cancel/export run bounded CPU preview jobs. Export captures the job, overwrite choice and document, and checks the caller's file scope before writing.
- Opaque PBR: looks can carry metal fraction, roughness and dielectric IOR. The product viewport and preview PNG use them; geometry and mass are unchanged. The v1 catalog export refuses PBR rather than dropping it.
- Render setups and PBR looks are saved under design format 21. Labels are in en/de/ja/ko/zh/ru.
Supersedes #706 and #800. Refs #620, #673, #756, #1004.
Contributed by @0xlillith.
Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
A design carries metadata (format 21): project, part number, revision, author, organization, description and license, plus other tools' data under reverse-DNS keys, kept as written. Edited in the Design Properties window (Document Settings), set by document.metadata.set, reported by inspect_design, and written into STEP, IGES and 3MF where the format has a place for them. Translated, with tests.
Rectangular and circular sketch patterns stay linked to their source: editing the pattern's count, spacing or the source geometry updates the copies, and the copies keep their point and radius relations. Patterns are saved under format 20; older designs keep their independent copies.
On Windows the temporary folder often has an 8.3 short name, which the path scope refuses. vfs::long_names spells folders SolidCraft derives from the environment with long names, and the MCP scratch folder and the recovery folder use it, so screenshot without a path and the recovery commands work there again.
PathScope stores its roots canonicalised (\\?\ on Windows, /private/var on macOS), so the default-folders test now canonicalises scratch_dir() before looking it up, like the recovery folder on the line above.
The same fix came in from @Karl-VonRichter in #969, found on macOS.
Co-authored-by: Karl-VonRichter <20079846+Karl-VonRichter@users.noreply.github.com>
A design with components and joints exports as a URDF robot description (file.export to .urdf, the MCP export tool, solidcraft-cli run --out, File > Export URDF...). It writes one binary STL per component in metres, links with mass, centre of mass and inertia from material density, and maps rigid, revolute, slider, cylindrical, pin-slot, planar and ball joints to URDF joints or short chains. Loops, broken joints and loose parts are reported as warnings. Options: mesh_prefix, effort, velocity. Docs in docs/urdf.md.
The app's control protocol gets engine.batch: the steps run in one request (so one frame), each as engine.execute runs it, stopping at the first failure and rolling back to the checkpoint by default. The MCP batch tool sends it to a running app (with the control token), is never resent after a lost reply, and falls back to step-by-step when the app refuses (agent cursor shown, or a step loads a file). A batch may take up to an hour to answer.
solidcraft --control PORT writes a random per-launch token to a user-only file (<data>/control/PORT.token; 0700/0600 on Unix, icacls on Windows; SOLIDCRAFT_CONTROL_TOKEN overrides) and refuses any connection whose first request lacks it. mcp --connect, the demo and packaging smoke clients send it. MCP execute/batch/open/save/export/screenshot are annotated destructive and open-world, new_design destructive. Docs: control-protocol.md, mcp.md, AGENTS.md, pending release note in releasing.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Agent tool calls (MCP, and bridged control requests carrying allow_paths) reach files only in the open design's folder (strictly inside home or the temporary folder, not in a hidden folder, and never its hidden files), the app's recovery folder, the server's private scratch folder and each --allow-path; --allow-any-path lifts the limit. Paths are resolved first, so .. and symlinks that lead out (including a save through a link, #845) are refused. On Windows, UNC, device, NT, verbatim non-drive, drive-relative, alternate-stream, reserved-device and 8.3 short-name paths are refused before any file system call, and the resolved path must be on a local drive. doc.recovery_discard and doc.recover {discard} delete only real recovery entries. Docs: mcp.md, control-protocol.md, README.
The MCP server instructions now point to `body_topology` for finding edge points (there is no `list_edges` tool), with a test that every tool the instructions name exists.
MCP execute accepts verbose: false too, using the same compact reply as batch (#599), and the MCP docs gain a section on compact replies.
Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
New view.apply command restores a named view, a standard view or any camera (view state, not an undo step); the desktop viewport follows it and the browser's Restore uses it. The MCP screenshot tool takes a named view or a camera. Un-ignores the #528 regression test. Fixes#528.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
MCP batch takes verbose: false for compact replies: feature steps leave out the full body list and sketch steps the ids they repeat outside created. Feature replies now also list changed_bodies and removed_bodies next to created_bodies, so a compact reply still shows every effect of a step. Un-ignores the #530 regression test. Fixes#530.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
Hidden bodies, occurrence placements, sketches and origin items are saved with the design and come back when it is reopened. Visibility is still not an undo step, but hiding or showing something now counts as an unsaved change. Additive field under format 16. Fixes#531.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>