Commit Graph
100 Commits
Author SHA1 Message Date
e6dc105134 Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151) (#5381)
* Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151)

A point cloud is kept in the design as a reference, drawn as depth-tested
dots and never a body.

- io: a PLY reader (ASCII, binary little/big endian; x, y, z of any numeric
  type, optional colours, other elements skipped; counts checked against the
  file) and XYZ/PTS text, thinned evenly past max_points. PLY meshes with
  faces can also come in through file.insert_mesh.
- doc: Document.point_clouds (shared f32 points relative to an f64 origin,
  colours, units, rigid placement, size and colour), stored as a binary
  container part; format change in pending/point-clouds.rs.
- engine: pointcloud.insert / edit / delete / list; doc.open opens a cloud as
  a new design; selection.delete takes point_clouds; view bounds include them.
- gpu: an instanced point-sprite pipeline (16 bytes a point).
- ui: Browser Point Clouds folder with eyes, menu and an Edit Point Cloud
  card; drop, Open, Insert and file dialogs take .ply/.xyz/.pts; a CPU
  viewport fallback; messages in en, en-GB, ja, zh, de and ko.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: colour by the file, one colour or height, from the UI (#5151)

The Edit Point Cloud card gets Color By (File Colors, Single Color,
Height). Height is a blue-to-red ramp over design Z, between the cloud's
own two heights or, by default, a range worked out from the points (all
but the lowest and highest 2 %, from an even sample). pointcloud.insert
and pointcloud.edit take color_by and height_range; pointcloud.list
reports them. The colour of each point is worked out in one place
(PointCloud::shade) for the GPU and CPU viewports.

Also: the card's dropdowns compare the picked index (a dropdown's
response doesn't report the pick, so File Units did not change either).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: integrate format registration and viewport caches (#5151)

* Point clouds: satisfy current UI audits and document comparisons (#5151)

Route model RGB data through the theme conversion boundary, provide a compact ribbon label, and include point clouds in the new document comparison. Gate the Unix-only CLI-link helper and test so Windows all-target checks remain buildable after the rebase.

* Point clouds: isolate translations for current main (#5151)

Move the existing 74 messages unchanged into one pending locale file and attribute it through a pending row, following the current repository workflow. Repository checks, 50 tooling tests, final workspace Clippy, wasm and generated-catalog equality checks passed after the rebase.

* Point clouds: fit the rebased code to main's GpuTarget and Frame

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Compare point clouds when reusing placement-independent results

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: complete command help and required translations (#5151)

* Point clouds: size the save cap from the raised limit after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 21:17:02 +00:00
austin62jakeandClaude Opus 5.5 86342b8c5c DXF import: an elliptical arc comes in as exact conic arcs, not a fitted spline (#8155) (#8241)
* claim: #8155

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* DXF import: an elliptical arc comes in as exact conic arcs (#8155)

A partial ELLIPSE (how Fusion, and SolidCraft's own DXF export, write an
elliptical arc) was read as a degree-3 spline fitted through 16 samples,
which strays from the ellipse between them: 0.84 mm on a 300-degree arc
of a 200 x 40 mm ellipse. It is now read as exact rational-quadratic
conic pieces of at most a quarter turn each, which the sketch keeps as
conics. A conic arc written by SolidCraft's DXF export now reads back as
the same conic.

The arc's sweep is taken with rem_euclid instead of a loop that added a
turn at a time, which ran for billions of turns on a start angle of 1e11.

sketch.drawing_bounds and the width/height sizing of sketch.insert_dxf
measure a conic by points along it, not by its apex, which can lie
outside the curve.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-28 16:56:17 +00:00
raykholo dd2e44bb12 Raise the largest file SolidCraft opens with a setting or launch flag (#4086) (#7565)
* claim: #4086

* Raise the largest file SolidCraft opens with a setting or launch flag (#4086)

* Translate the file size limit strings

* Size limits: design files are .sc now, .solidcraft still read
2026-10-28 16:52:29 +00:00
CamWightandClaude Opus 5.5 14acdc2a6d Render: one sRGB transfer function (#7161) (#7162)
* Render: one sRGB transfer function, geom::srgb, for the hand-written copies (#7161)

Twelve places wrote the sRGB encode or decode formula out by hand (doc's glass
recipe, engine's render library, glTF import, the PNG film, photographic and
presentation output, the ray tracer's image, the stage, the surface decoder,
texture normalisation and the theme's contrast check). They now call
solidcraft_geom::srgb: encode/decode on 0..1 values, encode8/decode8 for 8-bit
codes. render::surface::srgb8_to_linear stays as a re-export, so its callers
are unchanged.

Same results: the module's tests compare it bit for bit with the formula as the
callers wrote it, over all 256 codes and a dense sweep of linear values plus
the knees, out-of-range values, infinities and NaN, for each way the callers
clamped (after encoding, before it, or not at all), and decoded values either
side of the decode knee, where no 8-bit code falls.

One change: glTF import encoded in f32. Over every f32 in 0..1, 218 of
1,065,353,217 values sit on a rounding tie that f32 got wrong and now give the
neighbouring code (f64 gives the nearer one).

Left as they are: render/job/image.rs (replaced by exact tables in its own
change), the tests and the starter-pack validator that keep their own copy as
an independent reference, and the WGSL shaders (they can't call Rust).

Fixes #7161

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Tests: the sRGB codes of five callers that had no test of their output (#7161)

The glass swatch, a library surface applied as a plain appearance, glTF's
fallback for a colour channel that isn't a number, a stage panel and an empty
pixel in presentation output each get an assertion with their sRGB codes worked
out by hand. A planted wrong conversion at each is now caught by that test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 15:48:56 +00:00
Homero Thompson 31d6873f7d OBJ export: the body colours travel with the file (#4451) (#6693)
* claim: #4451

* fix(#4451): the body colours travel with the OBJ file

An OBJ export left the colours of the design behind: the mesh file named no
material, so every body arrived in the reader's default grey. The export now
writes a material library (.mtl) next to the mesh file, with a material per
body, and the mesh file names that library with mtllib and picks the material
of each body with usemtl. Every path is checked before anything is written,
the library goes first and the mesh file last, so a mesh file never names a
library that is not there. Only the colour of the body travels: the colours of
single faces and the transparency of a body stay out, as a face colour needs
material groups inside one object. The export that writes one file stays
material-free, so it never names a library it does not write.
2026-10-28 14:44:32 +00:00
PaddleStrokeandClaude Opus 5.5 10b8faeba3 Windows: an export over a file another program holds briefly waits for it, up to 2 s (#8104) (#8125)
* claim: #8104

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Windows: an export over a file another program holds briefly waits for it, up to 2 s (#8104)

write_atomic replaces the target with one rename. Windows refuses that rename
(os error 5 or 32) while another program, such as an antivirus or indexer
scanning a file written a moment earlier, has the file open without delete
sharing. The retry gave up after 127 ms of waiting, which a scan under load
outlasts, so render.export and library.export over an existing file failed
with "Access is denied".

The retry now keeps doubling its wait up to 250 ms, about 2 s in all. If the
file is still held after that, the error says the file is in use by another
program, followed by the system's own message. The old file stays whole
throughout, as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Saving over a read-only file fails at once, and says why Windows refused

Access denied (os error 5) is also what Windows gives for a read-only or
ACL-denied target, which waiting does not fix. A read-only target is now
refused without the 2 s wait, with "the file is read-only". Any other refusal
that outlasts the wait says another program may have the file open or it is
read-only, followed by the system's own message.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 14:32:20 +00:00
9bcb2ffe68 Drawings: first landing from the drawings branch (#8249)
* Drawing sheets: sizes, the ISO 5457 border and its marks (#3875) (#5108)

* Drawing sheets: sizes and the ISO 5457 border (#3875)

A sheet is a paper size and an orientation: ISO A0 to A5, Letter, Legal,
ANSI A to F, architectural A to E1, or a custom size (finite, above 0 and
at most 5,000 mm a side), landscape by default and either way for every
size.

A border profile is the rule for its border, and layout() works it out
for a sheet: the frame inside the margins, and the reference fields with
their labels. The ISO profile has a 20 mm filing margin on the left and
10 mm elsewhere, a 0.7 mm frame, fields of 50 mm out from the centre
lines with the corner fields taking what's left, rows lettered from the
top without I and O (AA, AB and on past Z), columns numbered from the
left, and an A4 sheet labelled on its top and right only. A profile can
divide the frame equally instead, or have no grid.

The records sit in geom, next to the section records, so saving,
rendering and export can all use them. Nothing is saved or drawn yet:
there is no command and no format change. Margins that leave no drawing
space, values that aren't finite, fields outside 1 to 1000 mm, more than
200 equal fields and unknown JSON fields are refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: ISO 5457's centring and trimming marks (#3875)

A drawing border profile now also holds the grid reference border and the
centring and trimming marks, either of which can be left out. The ISO
profile follows ISO 5457:1999 (read in its identical adoption,
IS 10711:2001):
- the grid reference border 5 mm outside the drawing border on every
  side, with the field labels between the two;
- four centring marks on the sheet's centre lines, from the grid
  reference border to 10 mm inside the drawing border;
- at each corner a trimming mark of two overlapping 10 x 5 mm
  rectangles, in the margin outside the grid reference border.

The labelled sides are now a rule worked out for each sheet: ISO 5457's
(the top and right of A4, all four sides of the others) or fixed sides.
So one profile labels every size correctly. validate() checks what
doesn't depend on the sheet, for when a profile is read; layout() calls
it, then checks the rest against the sheet.

Refused:
- a grid reference border that isn't finite, is negative or is wider
  than a margin;
- a centring mark that isn't above 0, would reach past the sheet's
  centre lines, or is on a drawing border those lines miss;
- a trimming mark that isn't above 0, is wider than it is long, is
  wider than the margin left outside the grid reference border, or is
  longer than half the sheet's shorter side.

The grid rule's JSON is now externally tagged ("none",
{"from_centre": {"field_mm": 50}}), as the sheet size is, so an unknown
field is refused in every form; the internally tagged "none" ignored
one. Nothing is saved yet, so the shape change costs nothing.

The names follow the glossary, and ISO 5457's "drawing sheets": the
module is drawing_sheet (was sheet, which means sheet metal elsewhere
here), DrawingBorderProfile and SheetLayout (were BorderProfile and
BorderLayout), sheet_border and drawing_border (were paper and frame),
and Sheet::size_mm (was paper_mm). The first part of S1 is still a draft,
so the renames are made here rather than in a commit of their own.

The extra centring marks ISO 5457 asks for on sheets larger than A0
aren't here yet. Still nothing is saved or drawn.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: a lighter built-in border, the filing margin a choice (#3875)

Cameron's decisions after seeing the sheet in the app, 2026-10-23:
- No trimming marks in the built-in profile: the filled corner blocks
  take a lot of ink. trimming_mark_mm stays, so a profile can still ask
  for them.
- Centring marks stop at the drawing border: from the grid reference
  border to the drawing border, never into the drawing area (on A4 they
  crossed the tables). centring_mark_mm keeps its meaning, how far a
  mark reaches inside the drawing border, and now takes 0, the built-in
  value, as grid_border_mm already takes 0 for "on the drawing border".
  A mark of no length (a reach of 0 with no grid reference border) is
  refused.
- Margins of 10 mm all round. ISO 5457's 20 mm filing margin on the
  left, for drawings that get bound, is a named choice: filing_margin,
  off when not given. On, it stands in for margins.left_mm, which is
  kept, and still checked, for when it's off again. The 20 mm is
  FILING_MARGIN_MM, and validate() and layout() both take the margins
  from one helper, laid_out_margins().

A3 landscape is now 400 x 277 at (10, 10), with eight 50 mm columns.
With the filing margin it is 390 x 277 at (20, 10) again, the same as a
20 mm left margin set by hand. A profile with all three choices on
(ISO 5457's full border) lays out exactly as the built-in profile did
before, and the tests keep the old hand values for it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing W23a workshop plate oracle fixtures (#4950) (#4962)

* test(oracle): reviewer-aligned parameterized workshop plate fixtures (#4950)

Independent analytic W23 expected values and seven verified models,
including four R10 corners and the 2 mm tangent top chamfer.
Document accepted Drawing states and commit regenerated docs/oracle.md
from successful workflow run #29 (90/90 pass).

* fix(oracle): correct W23 chamfer centroid and clarify drawing session ownership

* Paper scene: plain records of what is drawn on a sheet (#4890 A1) (#5513)

geom::paper holds what a sheet shows as plain data: groups of strokes and fills, each group tagged
with the object that drew it (an opaque id) and its kind, with one validation pass over a bounded
record count. Seg2's checks and the coordinate rule move into profile.rs so section and paper share
them, and drawing_sheet takes its side and line limits from paper, so each limit is written once.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: centring marks across the whole margin (#3875) (#5554)

The built-in sheet's centring marks now run from the trimmed sheet's edge to the drawing border.
From the grid reference border, as before, a mark was the same length as a grid field mark, and on
A3 it sat on one (the sheet's centre falls on a field edge), so it no longer read as a mark once the
grid reference border's outline is left out (Cameron, after the prototype on #3875).

- DrawingBorderProfile.centring_mark_start: sheet_edge (the built-in's, and when not given) or
  grid_border (ISO 5457's figure 5); ISO's full border in the tests asks for grid_border.
- A mark still needs a length: one that stops on the drawing border needs room outside it on the
  side it starts from, every margin for sheet_edge, the grid reference border for grid_border.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: no centring or trimming mark longer than the largest sheet's side (#3875) (#6410)

A border profile capped every length at 5000 mm (the largest sheet's side) but two: a
centring mark's reach inside the drawing border and a trimming mark's length. A file could
give either a huge whole number, such as 18446744073709551615. The read's number check passes
whole numbers, so the profile took it as 1.8e19 mm, and saving wrote it as a decimal the next
read refused: a drawing that saved but didn't open again. K2's fuzz test of drawing files
(#3890) found it.

Both now take the cap the margins have, `MAX_SIDE_MM`, in `validate`, so the file is refused
when it's read. Layout's own checks against the sheet are unchanged, so a 5000 mm mark still
validates and is refused only on a sheet too small for it.

Tests: the hostile-profile test refuses 5000.000001 mm and 1.8e19 mm for each mark, and takes
5000 mm on its own; 4 planted faults (each cap removed or made one short) are all caught.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials types: phantom, reference, purchased and inseparable (#3874) (#5107)

* Bill of materials types: phantom, reference, purchased and inseparable (#3874)

A component's bill of materials type is a part property (`bom_type` in its metadata, set with
component.metadata.set and read by component.metadata, as part_number is), so older releases
keep it and no format change is needed. It isn't a design property: the Design Properties
dialog doesn't list it and document.metadata.set refuses it. A word this build doesn't know
reads as normal and is kept.

assembly.bom counts by type: a phantom has no row and what it holds counts where it is placed,
in the same rows as the same parts there; a reference counts nowhere, and nothing inside it
does; purchased and inseparable components are one row, and in parts only an inseparable
component's purchased parts are listed too. Rows of one part number but different types are
different rows. Rows and children carry bom_type. With no types set the rows are as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Glossary: bill of materials and bill of materials type (#3874)

The bill of materials types are a new idea, so the glossary gets their
term, with the five types, and "normal" gets its fourth meaning in the
table of words with more than one meaning.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials types: a plain line for each (#3874)

The guide's table and the glossary entry say what each type is for in
plain words: something you make, something just to group, something to
use as a reference, something you buy, something made as one piece.
The names stay the five standard ones.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: kits fold together only when their contents' types match (#3874)

With group_children, two kits with one part number share a row when what they hold reads the
same. That reading (kit_key) compared each child by part number and count, but not by its bill
of materials type, though rows themselves are told apart by type. So a kit holding a made bolt
and a kit holding a bought one, both KIT, folded into one KIT x2 row listing the first kit's
bolt twice: the other type was lost, and which one depended on creation order. 0xlillith found
it in review of #5107.

kit_key now includes each child's type. Equal part number, type and contents still fold.

Test: two KIT kits each holding a BOLT fold into one row of two; once one bolt is purchased they
are two rows, each listing its own bolt. Planted fault (the type left out of the key): caught.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing files: a drawing saved as a container or as plain JSON, never read as a design (#3890) (#7098)

* File format families: drawings share the design format's versioning (#3890)

The format code works for a family of files: its own tag, its own numbers and
its own folder of change files, with one reading of a file's format, one
refusal of a file a newer build saved and one upgrade for every family. Designs
(solidcraft/N) are one family and keep everything they had: FORMAT and FORMATS
are as they were, and pending_names, format_string, version_of and read mean
what they did. Drawings (solidcraft-drawing/N) are the other, with format 1 as
their first record and each later change one file in
crates/doc/src/drawing/format/pending/, as design changes are. Nothing saved
changes.

A design tag never reads as a drawing's or the other way round, and a file that
names no format is a design from before format strings, never a drawing. Every
refusal names its family; a design's read word for word as before. A design
listing a pending change this build doesn't have is now refused as a newer
build's before its content is checked, as a newer number already was, so a
newer build's fields never read as damage. The list reader is
take_names(v, key, noun), the shape #4811 uses for its own list.

For the maintainer, the release step changes: scripts/fold-format-pending.sh
now folds every family that crates/doc/build.rs lists (FAMILIES), each into
its own next number: designs into crates/doc/src/format/v<N>/ as before,
drawings into crates/doc/src/drawing/format/v<N>/ from 2. With nothing pending
in a family it says so and moves nothing. Its test folds a drawing change into
v2 beside the design changes. docs/releasing.md, CONTRIBUTING.md and AGENTS.md say so.

build.rs lists each family's changes from its own folder, each folder's
versions contiguous from its own base.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing record: format 1 of the drawing family (#3890)

A drawing is now a record of its own (crates/doc/src/drawing.rs): its name,
the designs it draws (sources: an id and the design file's path, relative to
the drawing's folder as a linked design's is), its properties under the design
metadata's rules, its units (each design's own, or one length unit of the
expression unit table), its content language (a BCP 47 tag) and its sheets.
A sheet holds its paper, a copy of its drawing border's profile, the
resolution its pictures are rendered at (300 dpi unless it says, 25 to 2400),
the component it documents and whether it is left out of the sheet count or
of printing. This is format 1 of the drawing family; each later kind of
record adds one file in crates/doc/src/drawing/format/pending/.

The rules: one id counter for every object, raised above the largest id when
a file is read and never rewound; every reference is an id that must resolve,
or the file is damaged and refused, never patched; 1 to 1,000 sheets, at most
64 sources, names of 1 to 256 bytes, paths of 1 to 4,096 bytes without NUL.
The same drawing always saves as the same bytes.

Drawing::from_json reads at most 16 MiB of text, then runs the family's format
check, the number check, the upgrade, the typed record (unknown fields refused
everywhere) and Drawing::validate. The number check is now one function every
family calls, Family::check_numbers, told which field holds other tools' data;
a design's refusals read as before.

Nothing saves or opens a drawing yet: the container is the next step.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing ids: random and collision-free from format 1 (#3890)

A drawing's objects now take random ids, the form jyviko chose on #3890 from
#1017: no counter, so objects added on two branches never share an id and
never edit one line. The allocator is one module for drawings now and designs
later (#626 Phase 3), crates/doc/src/ids.rs: an IdSource gives nonzero u64s by
splitmix64 from a seed, each checked against the ids in use and drawn again
when it is one, or when it is 0. A run never draws a number twice, so at most
one draw per id in use comes before a free one, and a seeded run over a file
the same seed made still gets a new id. IdSource::seeded gives the same ids
for tests and replays; IdSource::from_entropy seeds a session from the
standard library's hash keys, the time and a count, with no new dependency.

In a file an id is 13 characters of Crockford base32, lowercase
(0000000000001 to fzzzzzzzzzzzz): ids::encode writes it and ids::decode reads
only that spelling, case-sensitive, so an id has one form to search for.
Anything else, 0 included, makes the drawing damaged. The drawing loses
next_id (a file that holds one is refused), and Drawing::new and allocate_id
take the IdSource. Messages name ids as the file writes them. The component a
sheet documents stays its design's own number until designs move over.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing record: a drawing too large to reopen isn't saved (#3890)

from_json reads at most MAX_DRAWING_BYTES (16 MiB), but to_json had no limit. Other tools'
properties are kept as they came, and indenting them can grow a drawing read in at about 4 MB
past 16 MiB (two million zeros in one array), so the next read refused what the save had just
written. 0xlillith found it in review of #3891.

to_json now returns a Result and refuses JSON longer than a read takes ("drawing too large to
save (at most 16 MiB)"), so every drawing saved opens again. Nothing writes drawing files yet, so
the error reaches the future file writer before it publishes anything.

Test: that case is refused, and a smaller compact drawing saves and reopens unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing files: a drawing saved as a container or as plain JSON, never read as a design (#3890)

K3 of the drawing storage plan (W11.2): the file a drawing is saved in. Nothing writes one from a
command yet; opening and saving come with K5.

- A drawing container is a design container holding `drawing.json` (Deflate, as `document.json`)
  in place of `document.json`, and `container.json` says so:
  {"content": "drawing", "format": "solidcraft-container/1"}. A design's `container.json` is as it
  was, with no `content`. The plain JSON form is the drawing's own text. Both give the same bytes
  every save, so a drawing can live in version control as text.
- `io::file_kind` tells a design from a drawing by `container.json` or by the JSON's format. The
  design reader refuses a drawing ("this file is a SolidCraft drawing, not a design: open it as a
  drawing") and the drawing reader a design; plain JSON only asks when it isn't a design, so
  reading a design costs nothing more. A container's content this build doesn't know, or a drawing
  container that also holds a design's `document.json`, is refused.
- `read_drawing` (bytes, either form), `read_drawing_file` (one seekable handle, the design
  reader's checks) and `write_drawing_container`; `DRAWING_EXT` (`scdwg`) and
  `is_drawing_path` beside the design's.
- The container writer's set-up and finish, the file opening and the container sniffing move into
  one function each, which designs and drawings both use. The container's own checks (budgets,
  entries, the ZIP directory) are the design container's, word for word.

Tests: a drawing round-trips through both forms byte for byte, and the container holds exactly
`container.json` and `drawing.json`; `file_kind` on both forms of both kinds; each reader refuses
the other's file; unknown content, a stray `document.json`, a missing drawing, an unknown
container version and a damaged drawing refused; both forms from disk, and a directory refused;
mutation fuzz of both forms (an error or a drawing, never a panic).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Paper scene: SVG of a sheet, its lines, arcs, cubics and fills (#4890 A3a) (#7032)

The first export of a paper scene, as SVG first (jyviko and 0xlillith on #4890), from the research
in the plan's §16. A3b adds ellipses, hyperbolas and Béziers above degree 3, which this refuses as
"not supported yet".

- `geom::paper::Prepared`: writers read a scene through `Scene::prepare`, which checks it first, so
  none reads one unchecked. Clipping goes there too, once (A8).
- `geom::paper::arc_pieces`: an arc's ends in pieces of at most a quarter turn, the last its own end.
  A half turn drawn from its ends is ill-conditioned: rounded to the nanometre (six decimals of a millimetre) its
  centre moves up to 1e-2 mm, where a quarter turn's stays under 1e-6 mm.
- `io::paper::paper_svg`: one user unit a millimetre, the size in mm on the root; y flipped by
  writing the height less y, so the file's numbers are page coordinates and an anticlockwise arc
  has sweep flag 0; lines `L`, arcs `A` (never large-arc), cubics `C`, parabolas `Q`; fills
  black and even-odd; one path per item; groups as `data-object` and `data-kind` (object ids can't
  be XML ids). No background, so cutters see only the marks.
- Numbers are whole nanometres (six decimals of a millimetre): no exponent, no "-0", the same bytes every time. They are the
  writer's own state too, so a joint is written once and a closed path ends exactly on its first
  point. Numbers are written straight onto the document, with no text made per number. A width
  under half a nanometre is written as one, and a piece too short for the grid is merged into the
  next, both counted in the report; a path's last piece has no next, so it is kept however short
  (unless it has no length). Output over 64 MiB is refused.

Tests: the A3 drawing border's whole document; quarter, 270°, clockwise and whole-turn arcs, and a
circle of two halves giving the same four quarters; the quarter-turn boundary both sides; cubics and
parabolas, and the conics refused; the number format; a closed path whose start and end round
apart; a sliver merged; an open path's short last line and arc kept, and one of no length dropped; read back through our own SVG reader (lines exactly, the arc as an arc);
the scene's JSON mutated into the writer (never a panic).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing W17a: view definitions as data (#4816) (#4817)

* claim: #4816

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing views as data: named views, scales and the map onto paper (#4816, W17a P1)

What a drawing view is, before anything draws it (geom::drawing_view):
- NamedView: the six principal views and the isometric views from the four upper corners, each
  an exact basis (a Plane whose normal points back at the viewer), never taken from a camera,
  whose pitch clamp would tilt a top view, with no -0 to write out; `iso` reads as the
  front-right one.
- basis_looking: any other view from its direction, an up and an origin (paper x = direction x up,
  paper y = x x direction), refusing a zero direction, an up along it, or an origin that isn't
  finite or within 1e12 mm. W07's
  {direction, up, origin} view reads through it.
- Scale: paper : model as two positive numbers, read and written as "1:2", from 1:100000 to
  1000:1; Scale::fit picks the largest ISO 5455 preset (50:1 to 1:10000) at which a view fits a
  space (W07's "fits the page" default), compared as size x paper <= room x model so an exact
  fit at a reduction isn't lost to rounding.
- ViewFrame: a view's basis, scale and place on paper, the point of its plane at `centre`
  landing at `position_mm`. Its paper map moves the view's curves and their accuracy onto
  paper (paper error = scale x model error); `boundary` maps a box of its plane onto paper from
  its four corners.

In geom, where Seg2 lives:
- Similarity2 and Seg2::similar (new): scale, turn and shift a segment exactly, an arc staying an
  arc. Similarity2::new refuses a scale that isn't above 0 and works the turn out once, not per
  point;
- Seg2::map_controls: a segment's control points mapped by any function. It was doc's
  sheet::map_controls; its four callers in doc use the method now, unchanged.

CurveAccuracy::scaled gives a curve's accuracy at another scale.

Tests: each named view's basis and viewer side, and the same bases from a direction and up; a 50 mm cube in every principal view at 1:1 and
1:2, and in isometric (edges 50 x sqrt(2/3), outline 50 x sqrt(2)); the view's centre on its
position (W07's 100 x 20 front view on A3 at 2:1); scales read, written and refused; the fitted
scale, an exact fit at 1:5 and ISO's smallest; no -0 in any named view's axes; an origin refused by
its own message; hostile bases, centres and positions; every segment kind moved by a similarity,
and the similarities refused; scaled accuracy.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing views: the bottom view pinned, square near parallel, bounded scales and boxes (#4816)

From DevonHope's review of #4817:
- The tests pin all six principal views exactly. The direction-and-up test uses literal ups,
  so a bottom view turned half round now fails it.
- basis_looking squares x to the direction before normalising. Near the 1e-9 threshold the
  normal was up to 8.8e-9 rad off; now it is about 1e-16.
- Scale::fit fits nothing for a size or room that is negative or not finite. A size of 0 still
  sets no limit that way.
- Each side of a scale is 1e-6 to 1e6, so a scale writes at most 49 characters.
- ViewFrame::boundary returns a Result. It refuses a box that is inside out or not finite on
  paper, instead of dropping a corner.
- paper_map, boundary and seg_to_paper say which coordinates they take.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing W18 S2: title blocks as data (#3875) (#3877)

* Title blocks: what a cell shows and where its text goes (#3875)

geom::cell holds a title-block cell's content: parts of text and fields
(component, drawing, sheet, revision or prompt, by key, with an optional
unit and decimals kept as written for the resolver to check), at most 64
parts and 4096 bytes of text, with no control character but a line break.
Beside it are a resolved value (live, overridden and drifted, or missing,
with "-" for each part that couldn't be read and why), an override with
the value it replaced, and the projection a drawing's views use (first or
third angle), which the title block's symbol will read.

A fit warns and never cuts: a count of characters, not bytes, with its own
count for text in Chinese, Japanese, Korean or Yi characters.

The cell text rule places a label and a value: the label's baseline 1 mm
plus its cap height below the cell's top, the value box under it inset by
1 mm, one line centred in the box, and wrapped or several lines down from
its top at the font's pitch, with a warning when the last falls below the
box. Wrapping by width, width warnings and glyphs a font lacks need the
text measured, so they wait for the paper scene's text.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Title blocks: definitions and their place on a sheet (#3875)

geom::title_block holds a title block's definition: its size (1 to 1000
mm a side), its outline and cell line widths, and up to 64 cells. Each cell
has a snake-case name of its own, a rectangle measured from the block's
lower-right corner, an optional one-line label with its cap height, and a
value: text from cell content, with its cap height, alignment and fit, or
the projection symbol, which reads the drawing's projection and is never
fixed in the block.

validate() checks a definition on its own, as when one is read: cells
inside the block and not overlapping (touching is fine), label and value
cap heights that fit, and the content's own limits. layout() puts the
block on the drawing border's lower-right corner of a sheet, refusing one
that doesn't fit, and gives each cell's rectangle, its label's place and
its value box by the cell text rule. On A3 landscape a 180 x 54 mm block
runs from (230, 10) to (410, 64); it fits A5 landscape and every larger
sheet, but not A5 upright.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cell text: a value box lies within the paper's coordinates (#3875)

place_lines took any finite, ordered value box, but centring one far out (min x 1e308, max x
1.1e308) overflows: the anchor came back infinite, with no warning. 0xlillith found it in review
of #3877.

The paper scene already bounds every coordinate it holds by MAX_COORDINATE_MM (twenty times
the longest sheet side). That limit is now public, and place_lines keeps its box inside it, so
its anchor is always finite: one rule for what a paper coordinate may be.

Tests: the hostile-box test refuses both overflow cases from the review and a box just past the
limit on each side, and places lines in a box the size of the whole paper limit. The fuzz test's
numbers now include values past the limit (1.1e5, ±1e308).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Title blocks: padding from the lines' inner edges, one label rule, nothing unread (#3875)

A cell's text is padded from the inner edge of its lines: each side of a cell moves in by half
the line drawn on it (the outline's on the block's edges, a cell line's inside), so a wide
outline never covers the text. Before, the padding ran from the line's centre.

The label's one-line rule lives with the cell text rules (`cell::check_label`), where parts
lists will find it. The cell types nothing read yet (`Override`, `Resolved`, `State`,
`Problem`, `Reason` and `MISSING`) wait for the resolver that will read them.

The tests check the exact thresholds inside the lines (a label that leaves no room, a value
that just fits), pick each of the lines, alignment and wrapping on their own so every
combination comes up, and lay fuzzed blocks out on every standard sheet, either way, with and
without the filing margin.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Title blocks: the drawing border's line, descenders, room where the block sits (#3875)

From DevonHope's review of #3877:
- Each cell's lines are clamped to the inner edge of the drawing border's line. That line runs
  along the block's right and bottom edges, and along any other edge it reaches, as when the
  block fills the border. Aabb2::intersection, the 2D twin of Aabb3's, does the clamping.
- layout checks each cell's room again where the block sits (place_cells, which validate runs
  at the origin), so rounding at the real corner can't turn a cell inside out.
- The cell text rule counts descenders, at 3/10 of the cap height (ISO 3098's lettering B).
  They may reach into the padding under a value box, never past it to a line. place_lines
  warns Height when they would, and validate asks it whether one line fits.
- The module doc no longer links to a private function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing W06a: exact orthographic hidden lines for the analytic subset (#2455) (#2457)

* Drawing W06a: exact orthographic hidden lines for the analytic subset (#2455)

crates/geom/src/hlr (L0): prepare once per body, then hidden_lines for a
scene of placed bodies. Edges and face silhouettes are projected from their
exact curves, split where projections cross, and each piece is classified by
rays toward the viewer against the trimmed faces: visible, hidden or
explicitly uncertain, never guessed. Planes, cylinders, cones, spheres and
tori are supported whether stored as analytic records, revolutions or spline
patches; freeform faces are reported and make what they could hide
uncertain. Screen geometry is Seg2 with the W01a accuracy vocabulary: exact
lines and conic arcs where the projection is exact, bounded chords
otherwise. docs/drawing-hlr.md holds the contract and its limits.

* geom/hlr: handle the brep records main gained in #3093

Main's exact model storage (#3093) added Curve::SurfaceIntersection,
Surface::PlaneThrough and Surface::PlacedRevolution, and the HLR matches on
the records no longer compiled. A plane through three points is a plane: it
is trimmed and intersected as one, and a box stored that way draws the same
bits as one with axis-stored planes. The procedural intersection curve and
the placed revolution (whose affine placement may scale it unevenly) are
refused by prepare as not supported yet, until the kernel adapter handles
them. The records' positions move with the body's centre like the others.

* geom/hlr: pad plane faces' boxes, so a plane record off by rounding still hides

Plane faces took the box of their boundary chords unpadded, flat along the
normal. When the plane record and its edges disagree by rounding (a unit cube's
top plane one ulp above its edges, a 100 mm cube's 1e-11), the ray toward the
viewer reached the plane just outside that box, the slab test culled the hit,
and the back edges came out Visible with no doubt. Every face's box is now
padded by 1e-6 of its size, as curved faces' boxes already were. Reported by
DevonHope on #2457.

* geom/hlr: limits from review: trim samples, scene extent, crossing pairs, surface groups

From DevonHope's review of #2457:
- Options::trim_samples must be 1 to MAX_TRIM_SAMPLES (4096).
- Placed bodies must stay within MAX_COORDINATE (1e12 mm, as section and brep
  bound stored numbers). Placements 1e200 apart made the scene's size infinite
  and every tolerance taken from it with it, so everything came out Visible.
- The crossing search counts its candidate pairs before it starts and meets
  each pair only in the first grid cell the two segments share, instead of
  keeping a set of the pairs met, which could outgrow wasm's 4 GB before the
  500 million pair budget tripped. The same pairs in the same order.
- prepare groups faces on one quadric or torus by comparing each face with
  the faces of its kind whose size agrees to the tolerance (sorted), not with
  every face; at most 50 million comparisons. prepare_cancellable polls a
  cancel callback between edges, faces and comparisons.

* geom/hlr: boundary chords on a grid, and no fine pass over coincident curved chords

The cost items of DevonHope's review of #2457:
- Every ray hit asked how far it lies from its face's boundary by scanning all
  of the face's chords (4096 per circle; a plate's face with 256 holes has
  about a million). The chords are now bucketed on a uniform grid over the
  boundary's box, cells at least as long as the longest chord, and the test
  looks only at the cells around the point. It finds exactly the chords the
  scan finds.
- Chords of two curved curves that lie on each other end to end (aligned holes
  seen along their axes) were cut into 16 by 16 pieces and intersected, to
  find crossings that are only noise within the curves' tolerance. They are
  now skipped; visibility changes where a coincident run starts or ends, and
  chords that only partly overlap still find those.
- Fixtures: a plate with holes, coaxial cylinders seen along their axis, and
  300 placements.

* geom/hlr: pad boxes by the body's coordinates too; coincident chords only to rounding

Review of the previous commits found two holes:
- The padding grew with the face's size, but rounding grows with where the body
  was modelled: a 0.001 mm cube 1e7 mm out, its top plane one step (1.9e-9 mm)
  above its edges, still had its hit culled. The pad now adds 1e-12 of the
  body's offset.
- Two chords were taken for coincident when their ends lay within each other's
  sag, which in a coarse scene can hide real crossings: an arc can bulge across
  a line 1 mm off its chord twice. Only chords that coincide to rounding are
  skipped now; identical projections, the costly case, still are.

* geom/hlr: coincident curves meeting at shared sample points do not cross

Timing the review's scenes showed that skipping coincident chords was not
enough: chords of two coincident curves also touch end to end at every sample
point they share, and each touch was a crossing to refine and split at. 64
coaxial cylinders seen along their axis gave 8.3 million crossings (19 s), 64
cylinders one behind another along the line of sight 4.2 million (214 s;
before these commits the crossing budget refused it). A touch at a shared
sample point is now dropped when the two curves also coincide, to rounding, on
both sides of it. Where a coincident run starts or ends one side differs, and
the touch is kept.

* geom/hlr: the own-face margin allows for rounding where a body was modelled

The far 0.001 mm cube of the previous commit showed a second effect of records
rounded at large coordinates: its top plane, one ulp (1.9e-9 mm) above its
edges, hid the top edges themselves, because a ray leaving an edge met its own
face 3.2e-9 mm along, past the own-face margin of 1e-6 of the face (1.4e-9).
The margin now also covers 1e-14 of the body's offset (about 45 ulps of its
coordinates), which only matters for parts far smaller than their distance
from the origin.

* geom/hlr: no parity test for a hit on the boundary, where it is uncertain anyway

* docs/drawing-hlr: the fixtures of the review's second round

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>

---------

Co-authored-by: CamWight <91156642+CamWight@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Benny1496 <163034806+Benny1496@users.noreply.github.com>
Co-authored-by: Mateusz Sych <151755914+SychPL@users.noreply.github.com>
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-10-28 13:31:16 +00:00
Mateusz SychandMateuszSychXpl e181015fd1 MCP save: a folder the agent opened or saved a design in stays in scope (#7181) (#7216)
* claim: #7181

* MCP save: a folder the agent opened or saved a design in stays in scope (#7181)

The agent's default folders held the open design's folder only while that
design stayed open there, so after a new design, an opened STEP file or a
save-as elsewhere a save beside the earlier design was refused, while the
same save through the control port worked.

The MCP server now keeps, for the rest of its run, the folder of every
design file a call opened or saved (open, save, and doc.open, file.save,
file.save_as through execute or batch, path given in full) and, headless,
of every design open in its session. Such a call only succeeded because the
folder was already in scope, so naming a path adds nothing. The folders get
the open design folder's terms (inside home or temp, not hidden, hidden
entries unreachable), at most 16. Bridged, they go to the app as
design_folders, which it judges the same way.

The save tool description and docs/mcp.md say how to add a folder with
--allow-path.

* MCP scope: a design's folder is the folder its file resolves to (#7181)

A link in another folder to a design inside the agent's folders passes the
scope check, which follows it, but its own folder was what got remembered
(and, for the open design, what counted while it was open). Take the folder
of the file as the check resolves it.

* Control test: a hidden file the export format accepts (#7181)

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-10-28 12:22:20 +00:00
bherbruckandClaude Opus 5.5 03b8f4138b New designs save as .sc; .solidcraft files still open (#7325)
* claim: new designs save as .sc

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* New designs save as .sc; .solidcraft files still open and keep their name on Save

DESIGN_EXT is now "sc"; DESIGN_EXTS lists sc, solidcraft and solvecraft and
every open path (dialogs, drag-drop, recent files, CLI, MCP, links, the web
picker) accepts all three. Save of an opened .solidcraft file writes that
file; Save As, autosave, recovery and crash reports use .sc. Windows, macOS
and Linux register .sc alongside the older extensions.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Update UI tests for the .sc default extension

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 22:41:40 +00:00
bherbruckandClaude Opus 5.5 7a6c884418 Change the app id to io.tangencylabs.solidcraft, with aliases for existing installs (#7681)
The app id moves from ai.storyteller.solidcraft to io.tangencylabs.solidcraft: macOS bundle id
(the CLI signs as io.tangencylabs.solidcraft.cli), Linux desktop/metainfo/MIME file names, icon
name, Wayland app_id / X11 class, Flatpak, Snap common-id, nfpm/FreeBSD/Nix/AppImage staging,
the web app's icon paths and the docs.

Existing installs keep working: the Flatpak repository marks both old ids
(ai.storyteller.solidcraft and ai.storyteller.solvecraft) end-of-life with a rebase straight to
the new id, re-marking the solvecraft ref that pointed at the 0.8 id; the manifest grants
read-only access to both old ~/.var/app folders and the first launch copies settings and
autosaves from the newest one; AppStream <replaces>/<provides> and X-Flatpak-RenamedFrom list
both; the AppImage removes menu entries it wrote under either old id. The data and settings
folders (solidcraft / SolidCraft) are unchanged. The MSI UpgradeCode and ProgIDs are unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 17:16:40 -04:00
98abb249c4 Cylinder: place by distances from reference edges, like Hole (#6380) (#6381)
* claim: #6380

* Cylinder: place by distances from reference edges, like Hole (#6380)

A Cylinder standing on a flat face can take up to two straight edges of
that face as references, each with the distance of its base centre from
the edge's line, measured in the face's plane, as a Single hole does
(#37). `solid.cylinder` takes them as `references: [{edge, distance}]`
with a numeric `base`; the edges are found again by their persistent
names, else their points, so the cylinder follows them when the part
changes, and each distance is a parameter (an input of Inspect Feature).
A cylinder without references stays at its base, as before.

In the Cylinder window, started on a picked face, Reference 1 and 2 take
the edges, each with its Distance measured from the pick, so it works
with the mouse alone; the canvas shows each distance with a box to type
it in, and Edit Feature picks the edges again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder: Edit Feature shows each reference edge input once (#6380)

A face selected when Edit Feature opened the window had already added
the reference inputs; the edit added them a second time.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder references: the measured-once cost test's cylinder has none (#6380)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder: pick the face it stands on in its window, then the edges (#6380)

The Cylinder window took its place only from a face selected before it
opened, so started first it stood at the origin and offered no reference
edges. It now has a Face input before Reference 1 and 2, as the Hole
window does: start Cylinder, click the face, click the edges, OK.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Glossary: reference edge, and "Reference" among the words with more than one meaning (#6380)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder edge references: the Cone dialog (#6250) gets the references field too

The Cone primitive landed on main after this branch began; its dialog initialisers lacked
the `refs` field the Primitive kind gained here. The dense form check for Cylinder fills only
its fields: its face and reference edges place it, which the reference tests cover.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder: declare references in its contract; reference-placed cylinders are not placement-independent

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 19:28:22 +00:00
semmelrindeandClaude Opus 5.5 28b27aac8f Saved model: kept only when every body decodes to itself (#6760) (#6761)
The native codec gave one body back with other topology: a pattern copy
cut by an automatic extrude, 10 faces, 18 edges and 10 vertices, came
back with 12 vertices, so the design opened with another body than it
was saved with. Encoded::of now decodes each body it encodes and keeps
the model only when every body comes back with the same face, edge,
vertex and shell counts; otherwise the design is saved without its
model, as when the encoder refuses a body, and opening it evaluates it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 18:28:41 +00:00
semmelrindeandClaude Opus 5.5 2346c1ae81 Web app: Report a bug saves its screenshot as a download (#7192) (#7197)
* claim: #7192

* Web app: Report a bug saves its screenshot as a download (#7192)

Save screenshot… wrote the PNG with image's save, that is std::fs, which
the browser doesn't have. The screenshot is now encoded in memory and
written through vfs, as every other save is, so the web app hands it out
as a download. Natively the same file is written and ui.screenshot
replies as before. A failed save says why in plain text instead of a
Rust debug value.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Web app: a screenshot without a path no longer panics (#7192)

`ui.screenshot` without a `path` saved to `std::env::temp_dir()`, which panics on
wasm32-unknown-unknown (std has no file system there), and the web app's control
requests come through `window.solidcraft.request`. `vfs::temp_dir()` now returns
`vfs::BROWSER_TEMP`, a folder of the in-memory files, in the browser, and
`save_screenshot` and `vfs::design_folder_refusal` (reached when a request names
`allow_paths` while a design is open) use it. Natively nothing changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Web app: keymap and theme exports download (#7192)

Both exports wrote with `std::fs::write`, which always fails in the browser. They
now write through `vfs::write` like the other saves, so the web app hands the file
out as a download. Natively the file is the same; an agent's folder scope now
applies to them as to every other write.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Tests: say what the folder-scope checks of the saves show (#7192)

The screenshot test wraps the write in a folder scope by hand: that proves the write goes through vfs, not that ui.screenshot's write runs inside the request's scope. ui.screenshot checks the agent's folders when the request arrives; the PNG is written in a later frame, outside that scope, as on main.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 12:41:21 +00:00
bherbruckandClaude Opus 5.5 739e442824 Links: ask before following a design's network paths (#7372)
A path a design names (a linked design, a sketch text's font file) now
goes through one rule before any file call: a network location is
reached only once its server is allowed, a device path never. Update
Links and Open Linked Design ask first (Allow once / Always allow this
server / Cancel); Preferences > Design lists the allowed servers and
can allow every network location. component.links reports such a
link's found as unknown with a reason, without looking for it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 18:52:43 -04:00
Homero Thompson b2525ed34e Tests: the six timing assertions do not depend on the wall clock (#6917) (#6925)
* claim: #6917

* Tests: the six timing assertions do not depend on the wall clock (#6917)

Six tests asserted on the wall clock. Their result depended on how loaded
the machine was and not only on the code under test: they passed on an idle
machine and failed when the test binaries ran beside each other, which is how
the suite runs (`cargo xtask test` starts every test binary at once).

CONTRIBUTING.md:196 says it: "Tests run beside each other on a busy machine,
so a test must not depend on wall-clock timing."

The change is confined to the six test files the issue names:

- geom: the tangent chain of a helix is a ratio (750 pieces against 3 000)
  instead of a limit of 200 ms.
- io: the placement budget is spent inside the reader, so the clock is gone.
- ui-egui: the classification of many faces is a ratio (900 against 3 600)
  instead of a limit of 10 s.
- engine: the clearance measurement drops its 30 s limit; the boolean that
  gives up reports itself.
- engine: the fillet beside a modelled thread is a ratio (a 1 mm thread
  against an 8 mm one) instead of a limit of 30 s.
- ui-egui: the window frame budget goes from 250 ms to 20 s, the limit #6072
  gave its own probe.

The helper is the one #649 wrote, copied into the crates that need it, with
the noise of a run as a parameter.
2026-10-26 11:14:11 +00:00
710b7a664e Save a mesh larger than the design file once it is compressed (#6600) (#6701)
* claim: #6600

Co-authored-by: Cursor <cursoragent@cursor.com>

* Save an imported mesh that only fits after compression (#6600)

The design file limit was applied to the mesh before Deflate, so a mesh
that had already loaded could not be saved or autosaved.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix: validate and version large mesh saves (#6600)

---------

Co-authored-by: Colin Faulkingham <colinfaulkingham@Colins-Mac-mini.local>
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-26 11:13:48 +00:00
ChrisNo a3890b3bd5 Open a linked part from its assembly Browser row (#2348) (#2349)
* claim: #2348

* Open linked designs from assembly browser

* claim: #2348

* Test linked design action with multiple components selected

* Fix linked design lookup in browser storage and translate its menu action

* Add Turn Up Axis to complete UI catalogs

* Keep browser DXF download after linked-design checks
2026-10-25 21:15:48 +00:00
dudedagger42andClaude Opus 5.5 ceed604498 Mesh export: a quality choice, so small round features get enough sides (#4747) (#4773)
Every STL, OBJ and 3MF export meshed each body with a chord tolerance of
2e-4 of its size, with no way to ask for finer: a 3 mm hole in a 200 mm
part came out with about 14 sides. file.export and file.save_mesh take
`quality`: standard (as before, the default), fine (5e-5) or finest
(1e-5), and Save As Mesh has a Quality row, remembered like its format.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 17:42:51 +00:00
Colin Faulkingham 0312808b92 DXF: reject non-BMP text instead of replacing it (#5056) (#5709)
* claim: #5056

* fix: reject unsupported Unicode in DXF text (#5056)

* fix: adapt new DXF callers to fallible writer (#5056)
2026-10-25 11:01:32 +00:00
raykholo cc1e654690 Warn when a design is open elsewhere or changed on disk (#5467) (#5468)
* claim: #5467

* Warn when a design is open elsewhere or changed on disk (#5467)

The desktop app keeps a lock file next to each open design
(.~<file>.lock: computer, user, version, opened and refreshed times),
refreshes it every minute and removes it on close; a lock not
refreshed for three minutes is stale and ignored. Opening a design
that another SolidCraft has open asks: Open Read-Only, Open Anyway or
Cancel. A read-only design saves only to another file.

A design remembers its file's size and modification time when it is
opened or saved. Save over a file another program or computer changed
since asks: Save a Copy (the default), Overwrite or Cancel.

Programmatic calls never ask: doc.open reports open_elsewhere and takes
read_only, and file.save over a changed file returns an error until it
is given overwrite: true. ui.documents answers both questions.
2026-10-25 03:34:20 +00:00
NOWN-DEVandClaude Opus 5.5 b88673f366 Model cache: each sheet body is written once, not with every state (#6152)
* Test: a saved model keeps each sheet body once

A sheet-metal design wrote its sheet bodies again with every later feature's state in the saved
model: each feature that leaves the sheet alone (a box beside it) adds more than the whole sheet
to the records. A design of many features after its sheet metal passed the cache's 32 MiB
manifest limit that way and kept only some of its states (#3220). The test also opens the saved
file and wants the sheets taken from it as evaluated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Model cache: each sheet body is written once, not with every state

Problem: a saved model writes every feature's state, and each state wrote its sheet bodies in
full; most features leave the sheets as they were, so a sheet-metal design of many features
repeated them over and over (a 280-feature part: 30.5 MB of manifest, 29.6 MB of it 69 distinct
sheet records written 243 times). Past the manifest's 32 MiB limit the save thinned the cache
(#3220) and opening evaluated the left-out features again, although the distinct data was small.

Solution: the records keep a list of sheet bodies, each written once; a state names its sheets by
their place in it, as it already does for bodies and sketches. A thinned model keeps the whole
list and counts it once against its budget; the reader counts sheets with the bodies and sketches
a state holds; the cache format is now /4 (an older cache is a miss).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:24:57 +00:00
Dennis Klappe b201c283c7 Model-cache tests trust an unknown source commit, so they pass without git (#4221)
Fixes #4045
2026-10-24 21:20:56 +00:00
Dennis Klappe 96661111f9 OBJ export shares vertices and keeps body names as written (#4462)
Fixes #4451
2026-10-24 21:13:49 +00:00
raykholo b00a1e87f4 Insert SVG: refuse geometry scaled to infinity, and bound the profile grid (#5020) (#5025)
* claim: #5020

* Insert SVG: refuse geometry scaled to infinity, and bound the profile grid (#5020)

A transform such as scale(1e308) turned a circle's radius into infinity.
The SVG reader now refuses non-finite transforms and geometry with a clear
error, and Grid::cells in the profile finder uses checked arithmetic, so an
infinite or huge box is checked against all shapes instead of wrapping the
cell count and allocating until memory runs out.

* Insert SVG: refuse lines with infinite ends; fix the grid test's cell count

A line whose transformed ends are infinite was dropped silently, because the
distance between them is NaN. It is now refused as out of range, like curves.

The new grid test expected one cell for a box spanning its own one-box grid;
such a box touches the 2 x 2 cells at its corners, so it expects 4.
2026-10-24 20:46:21 +00:00
9e6e0b8df1 Render workspace: complete experimental ribbon, resources and effects integration (#5493) (#5494)
* wip(render): reconcile completed material and image pipeline source with 0.20 (#5493)

Source-only integration reference for staged review, not a merge-ready aggregate.
Donor: 0xlillith/solidcraft@aea20b0115.
Upstream: 858e5995d6.

Retain original CPU/material contracts and explicit GPU donor provenance in
docs/render-materials-lab.md (#2067, #2191, #2780, #3306). Preserve released
format migrations and current navigation/startup/shell behavior. New saved
records use pending descriptors. The physical-card descriptor follows the
maintainer's material-engineering-cards naming request, with a legacy-lab
format-29 regression. Replace raw new panel hosts with shared containers.

Repository checks, complete workspace/all-target Clippy, and the independent
physical/resource authoring checks pass for this source. The fresh full local
CI invocation has reached test compilation and is not yet complete. Do not
transfer donor native output or prior test totals to this integration.

Generated review screenshots, video, package ZIP and machine logs remain at
the immutable personal evidence pin. Uncommitted geometric displacement is
backed up separately, not silently included. No kernel/vendor change, direct
main write, release or independent contributor-branch rewrite.

Co-authored-by: Christian Svensson <blue@cmd.nu>

* test(cli): pin the Compact camera-sample admission diagnostic (#5493)

The bounded request still refuses 1024x1024x64 samples before host initialization and writes no output. Update only the stale expected diagnostic to the existing Compact budget wording; production limits and code are unchanged. Exact-tree CLI regression suite: 14 passed, 0 failed. The full repository gate has been invoked separately and is not yet complete.

* Normalize UI container violation paths across platforms

Report repository-relative paths with forward slashes so diagnostics and the existing nested-package regression assertions agree on Windows and Unix. Keep the container detection rules unchanged.

Validation: official ui-containers gate and all seven focused xtask tests passed; rustfmt and diff checks passed. Only xtask/dependencies were compiled; no application build or heavy tests.
(cherry picked from commit 44b58d8e10)

* fix(render): preserve camera contracts and correct acceptance regressions (#5493)

Preserve Design view.apply semantics with a separate strict Render camera command. Retain existing translations when English-only aliases collide; add material-axis entries and camera-specific pitch labels. Compare complete validated engineering cards and retain job handles before cancellation.

Focused and native acceptance is pinned to tree f8a423b21f. Full CI has been invoked separately and is not claimed green. Landing follows the render integration policy in #5493.

* fix(render): resolve showcase licence and upstream resource hygiene (#5493)

Record SychPL's explicit MIT OR Apache-2.0 grant, retaining source/model bytes and the Ubuntu lettering notice. Remove 80 absent attribution rows, personal fork records, dead delivery attributes and three fork/resource-only workflows. Existing xtask assets now performs bounded offline hash checks and rejects orphan render attribution; no parallel draft CI or package installation. Original authoring reproduction remains explicit. Scoped xtask tests, assets, Clippy, formatting and prepared SELENE validation pass; no application or renderer-wide result is inferred.

* fix(render): align saved bounds and progressive sample resolution (#5493)

Address review r4364211669/r4364211677/r4364211681/r4364211691/r4364211695. Persisted light/frame domains respect the existing 1e9 document bound; related LED/rectangle/direction cases use the same bound. Workstation primary resolve shares the 4096 admission cap and film counters use checked conversions. Exact candidate: 485 CPU render tests, 21 render document tests and strict scoped Clippy pass, including positive boundary round trips and 2048/4096 end-to-end checkpoints. No released format/migration edits, relaxed test limits or full-stack acceptance claim.

* wip(render): isolate optional resources and harden sample handling (#5493)

Review work in progress: opt-in encoded render library with reproducible runtime catalog exports; native-only robust dependency through the workspace; checked bloom slices; per-sample point-light diagnostics; independent area-light spatial/film keys. Resource-module binaries in both configurations, generation, Cargo production feature graphs and attribution checks pass. Full engine/render regression and combined acceptance are pending: do not merge this donor as a constituent or treat scoped resource proof as runtime acceptance.

* fix(gpu): preserve donor allocations through the scope-safety repair (#5722)

Port the native-validated #5723 scope-cleanup correction into the experimental donor, retaining its adaptive, volume, aging, photographic and bloom allocations. Same reverse-drain helper and regression cases; the donor combination still needs its own compile/test gate and is not covered retroactively by render-base results.

* claim: #1369

* Reject unknown pending concepts after format folding (#1369)

* test(render): close bounded sampling and bloom review regressions (#5493)

Validate the optional-resource/lighting/dependency donor at its exact tree. Required Vulkan GPU 127/0/3; CPU renderer 487/0; engine Render 72/0; document render 21/0; lean library 7/0; strict scoped Clippy, assets/layers/lists/containers and lean-engine WASM pass. Preserve original failed controller/typing attempts. This is the draft donor/disposition source, not a replacement for constituent render PRs or final main acceptance.

* wip(render): preserve stable aging target validation candidate

Exact staged source from prior review work on donor 3b892eab5e. This is a recovery/review checkpoint, NOT accepted delivery. An actual command-path regression currently fails because the selected executor refuses ordered surface aging. No assertion, capability or admission limit is weakened. Native/UI/full combination acceptance remains pending. Saved/runtime split adds one pending descriptor and retains original file scope; no main/render branch is changed.

* test(render): preserve numeric setup intent at the admitted coordinate bound

Follow up jyviko review on #5494 without weakening the corrected saved-coordinate contract. The positive clicked fixture uses 1e9 instead of inadmissible 2e9; explicit out-of-range cases still refuse, and the full saved setup round-trips through JSON and the native container. Exact-source Render workspace 95/0 and strict all-target UI Clippy pass. This does not incorporate the separately failing stable-aging candidate or claim full current-render acceptance.

* test(render): use the real GPU executor for saved aging

Move successful native cold-reopen Check/Start coverage from the CPU-backed protocol fixture into the production GPU executor tests. Verify capture-index changes preserve the stable target and that enabling aging changes both PNG and raw EXR output. Retain explicit, allocation-free refusal coverage for executors without aging support. Production capabilities and admission checks are unchanged.

* fix(render): persist stable identities for targeted aging (#5493)

Separate saved RenderBodyTarget identities from captured mesh ordinals. Reject legacy ambiguous targets, resolve Check/Start after visibility changes and preserve native reopening, copies and undo. Unsupported executors still refuse; real AMD Vulkan regression completes saved aging after reordered capture.

Source tree 6b84c8ad passes document 23, engine Render 75, GPU effects 5 and Render UI 95 with no failures; scoped strict Clippy, WASM and repository gates pass. Fresh CLI/native reopen and clean/aged GPU exports pass with identical physical totals and inspected actual images. Whole current-render integration is separate.

* fix(render): reconcile combined CPU/GPU contracts on current upstream

Unify captured resources/status and CPU-vs-GPU request schemas after the real two-parent integration; remove obsolete duplicate Vulkan selector and retain combined platform-filter regression. Deduplicate only identical or superseded test definitions, retaining the stronger card metadata and reserved-executor assertions. No assertions, admission limits or feature refusals are weakened.

All targets of render dependencies, GPU, engine, UI, CLI and native app pass cargo check with raytrace-cpu and bundled-render-library at tree c70d00d1. Native executable tests and full current-source acceptance remain pending. This is a private integration rehearsal for subsequent constituent PRs, not an aggregate official render/main merge.

* test(render): retain one complete host lifetime regression set

Deduplicate byte-identical DropProbe/task-lifetime tests and retain the adapted environment/texture ownership regressions with every assertion and complete memory estimate. Keep the registered-geometry admission regression once; only struct field order differed. Replace a one-element diagnostic loop with its equivalent block, preserving all wrap/width assertions.

Test-only integration repair. Formatting and diff checks pass; refreshed executable validation is required. No production behavior, limits, assertions or ignores changed.

* fix(doc): recognize the proven format-29 card descriptor alias

Normalize only the historical format-29 physical-material-cards spelling, and only when material-engineering-cards is registered. Admission and migration de-duplication use the same identity. Unknown concepts, wrong versions and incapable readers still refuse before mutation. Six controlled-history Rust regressions and actual CLI migration/no-clobber acceptance pass. No version, released migration or CI changes. Refs #5793, #1369, #5493.

* test(render): preserve grounding refusal before explicit instance moves

Update the two Render binding fixtures for upstream first-occurrence grounding. Verify grounded movement refuses without changing document/history, then explicitly unground through the public command before the intended move. Retain every target, resource, copy and persistence assertion. Refs #5493.

---------

Co-authored-by: Christian Svensson <blue@cmd.nu>
Co-authored-by: Victor Santos Oliveira <56417388+Vittuu@users.noreply.github.com>
Co-authored-by: cfaulkingham <colin.faulkingham@gmail.com>
2026-10-24 14:21:59 +00:00
+33 b7b25f9e2b Render workspace: first basic delivery to main (#6050)
* Normalize UI container violation paths across platforms (#5599)

Report repository-relative paths with forward slashes so diagnostics and the existing nested-package regression assertions agree on Windows and Unix. Keep the container detection rules unchanged.

Validation: official ui-containers gate and all seven focused xtask tests passed; rustfmt and diff checks passed. Only xtask/dependencies were compiled; no application build or heavy tests.

(cherry picked from commit 44b58d8e10)

Scoped render-branch prerequisite from #4507, coordinated under #5493. No unrelated translation/kernel changes are included. Fresh Windows fmt, seven ui_containers regressions and the production container gate pass on render base 3a6153d18f. Full CI is reserved for final render-to-main acceptance under the maintainer policy.

Co-authored-by: Victor Santos Oliveira <56417388+Vittuu@users.noreply.github.com>

* Preserve translated source-label aliases (#5619)

Render integration prerequisite for #5493. Fixes #5618. Retain stable-ID fallback and translated legacy captions; include controlled regression coverage.

* Persist validated engineering cards independently of mass and optics (#1060)

Render constituent under #5493. Fixes #1048. One pending material-engineering-cards descriptor, immutable released migrations, independent assigned density and source conditions. Nine persistence and ten physical-card regressions plus the fresh quick gate pass. Additional native follow-up is reported separately; no full-stack acceptance is implied.

* Render: progressive GPU path-tracing executor (#2067)

Land the unchanged contributor GPU foundation into render under the maintainer policy in #5493. Fresh quick gate 39993339605 passed. Original author and co-author attribution retained; no workflow file changes. Final render-to-main CI and jyviko sign-off remain separate.

Co-Authored-By: Christian Svensson <blue@cmd.nu>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render: asynchronous GPU setup and completed-image panel (#2780)

Integrate the original asynchronous setup, progress and completed-image UI after #2067. Refreshed source passes quick gate 40009901424. Original attribution retained. Final render-to-main full CI and jyviko sign-off remain separate.

Co-Authored-By: Christian Svensson <blue@cmd.nu>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render: studio lighting, clear coat and glass on GPU (#2191)

Integrate the original studio renderer after the GPU executor and async UI foundations, under #5493. Fresh render-target quick run 40011408339 passes. Preserve attribution, bounded resource admission and documented glass/denoising limits. Historical native benchmarks retain their source pins. Full renderer-to-main CI and jyviko sign-off remain separate.

Co-Authored-By: Christian Svensson <blue@cmd.nu>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Codex <noreply@openai.com>

* GPU path tracing: use compatible Vulkan adapters (#3306)

Land the final Vulkan-only path-executor policy after #2191 under the #5493 constituent route. Fixes #3217. Fresh quick run 40012565783 passed. Preserve adapter/software policy and CPU fallback; no DXC dependency or workflow changes. Full native/hardware acceptance and final jyviko sign-off remain separate.

Co-Authored-By: Christian Svensson <blue@cmd.nu>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* test(material): initialize optional cards in upstream density regression

Fix the E0063 found by quick run 40015318093 while combining main #4785 with render #1060. The new upstream fixture explicitly has no engineering card. Keep every density/name/default-material assertion and production implementation unchanged.

* feat(render): expose independent anisotropic GGX core (#1694) (#1699)

Extract the original numerical source and analytic tests from published #1698 at 463a3e0d into its existing #1699 constituent. Keep current GPU/shared jobs, format and kernel untouched. Add scoped numerical-contract documentation. Full render library 158 passed, strict scoped Clippy and wasm pass, as do assets/layers/lists/format; source tree pinned in the acceptance record. No runtime consumer or final combined renderer acceptance is claimed.

* Sync current main into render, preserving release and viewport changes (#5705)

* Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci]

* Viewport: whole-body highlights reuse the model's own triangles (#4554) (#5109)

Hovering or selecting whole bodies -- a browser row, a History group, a body
under the pointer in body-pick mode -- built a CPU copy of every body's
triangles into the highlight scene. On a 40-body 4.3 MB STEP assembly that was
147 bodies, 70 MB of triangle copies and a 519 ms frame.

The model already has the same geometry on the GPU. The highlight now names it
and the renderer draws it again in the highlight colour:

- bodies drawn from a display plan: the model's evaluated plan chunks, with a
  hover/selection tint uniform (the chunks stay resident in the model scene);
- bodies drawn as placements of shared triangles: the same placements of the
  model's shared triangles, coloured per instance;
- bodies the model builds on the CPU: their vertex range in the model scene's
  block.

See-through and faded bodies keep the CPU feedback, which colours them; faces
and edges highlighted on their own are unchanged. The highlight looks the same
(verified side by side).

On the assembly the highlight build drops from 519 ms to 9 ms and no longer
copies any triangles; selecting the whole assembly takes 9-20 ms.

Co-authored-by: Claude Code <noreply@anthropic.com>

* Offer to stand up SolidWorks files instead of turning them silently; add Turn Up Axis to the component menu (#5655)

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch on a picked origin plane uses the plane shown after standing an import up (#5659)

* Sketch on a picked origin plane uses the plane shown, also in a moved component

After a STEP file opens its component stays the active one, and standing it up
turns that component a quarter about X. Starting a sketch on XY picked in the
viewport then sent `{"plane": "XY"}`, which names the active component's own
XY: upright after the stand-up. The sketch landed on the world XZ, Look At
turned to face Y and the extrude went along Y.

The viewport and browser only show the design's origin planes, so a picked
origin plane now goes to sketch.create written out as that world plane while
the active component is moved; sketch.create maps it into the component's
frame once. The flip toward the viewer uses the same plane.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Stand-up axes tests: stand the file up through the offer when one is waiting

#5655 offers to stand up SolidWorks files instead of turning them silently.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* gpu tests: give the two test frames the new hover and selection tints (#5698)

#5109 added Frame::hover_tint and selection_tint; two test frames that landed alongside it didn't set them, so solidcraft-gpu's tests stopped compiling on main.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Release 0.21.0-rc.2 (#5691)

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Jackson Oursland <jacob.oursland@gmail.com>
Co-authored-by: Claude Code <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>

* GPU: preserve error scopes on cancelled preparation (#5722) (#5723)

* claim: #5722

* fix(gpu): unwind preparation error scopes on cancellation (#5722)

Move fallible CPU HDR packing before GPU scopes and drain the remaining scope stack in reverse order before propagating denoiser/resource allocation failures. Native regressions cover cancellation and allocation-error cleanup plus subsequent scope reuse. Exact candidate Vulkan-required GPU suite: 101 passed, 0 failed, 3 existing ignored; strict GPU all-target Clippy and repository assets/layers/lists/container checks pass. No driver exception, shader transport or test limit is suppressed.

* library: transport PBR and engineering cards without lossy copies (#1086)

* wip(library): reconcile exact rich-catalog replacement semantics (#1062)

Source-only scoped extraction from original 0f801962 / #1086 on the refreshed #1060 card prerequisite. Preserve current asynchronous picker guards and source-ID handles. Scalar v1 and rich-v2-without-PBR clear existing PBR; supplied rich PBR is retained. No new saved concept or duplicate card descriptor. Formatting and source review completed; compile/native acceptance is still pending.

* test(library): preserve explicit downgrade and fallible UI regressions (#1062)

Request scalar v1 explicitly in the card downgrade refusal regression; rich v2 remains the default lossless writer. Propagate fallible harness actions with ? in the shared clicked-catalog helper, preserving all assertions. No production code, limits or ignore changes. Fresh grouped IO/engine/UI tests, scoped strict Clippy and WASM pass on this exact tree.

* Render: defer path-host startup until first use (#5742) (#5743)

* claim: #5742

* fix(render): defer GPU path initialization until first use (#5742)

Retain the selected adapter factory during Design/safe-mode startup; instantiate once on first Render entry, including late viewport installation. Preserve the deferred/preparing/ready/failed state across document changes and retain selected fallback adapter policy. Exact tree passes 32 render-workspace and 1966 full UI tests (0 failures; 7 existing ignored), strict native all-target Clippy, wasm check and repository gates. Three wasm warnings remain in untouched upstream files. Fresh native desktop acceptance is separate and in progress; no whole-renderer/main sign-off implied.

* GPU: adapt dispatches and retire lost devices (#5754) (#5755)

* claim: #5754

* fix(gpu): adapt dispatch size and retire lost path devices (#5754)

Start with a 64-item quantum and adapt bounded work toward 20 ms from observed completion, including denoiser tiles. Never exceed 16384 work items; hardware-specific shader cost means this is not a universal TDR guarantee. Publish device loss/uncaptured failure/poll failure through live executor availability without reinitializing automatically. Source-pinned required-Vulkan GPU suite: 105 passed, zero failed, three existing ignores, including actual device.destroy retirement and session availability. Strict GPU/engine all-target Clippy passes. Broader engine and repository/WASM continuation remains separately recorded. No geometry baseline, CI rule or published format history change.

* fix(render): wrap complete backend diagnostics (#5714) (#5715)

Preserve full backend/job/decoded-image diagnostics in the existing shared panel without ellipsis. The painted-galley regression covers Floating/Compact and light/dark, complete text, wrapping and fixed panel width. Exact-tree Render UI 33/0, strict UI Clippy, WASM and repository gates pass. Real safe-mode window captures, camera restore, CPU export and normal exit are recorded; no backend behavior or unrelated UI policy changes.

* Sync pinned main into render (#5869)

* Viewport: show reference geometry through bodies (Preferences, off by default) (#2697)

A new Graphics preference, "Show reference geometry through bodies", draws
inactive sketch contours, origin and construction planes and their axes over
shaded bodies. It is off by default, so the viewport looks as before: reference
geometry is depth-tested and a section leaves it whole (#1229); Create Sketch
and dialogs picking a plane still draw the planes through the model.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* ui-egui tests: offscreen GPU tests start their devices one at a time (#3989) (#3990)

* claim: #3989

* ui-egui tests: offscreen GPU tests start their devices one at a time

Every offscreen test started a wgpu instance of its own, and starting one
makes the Vulkan loader scan its drivers. With several test threads two
tests doing that at once crashed the test process with SIGSEGV inside the
loader (loader_icd_scan). offscreen_device now holds a process-wide lock
while it starts the instance, adapter and device; each test keeps its own
device and the rendering still runs side by side.

* DXF: write and read a Bézier at its own degree (#5269) (#5281)

* claim: #5269

* DXF: write and read a Bézier at its own degree (#5269)

The DXF writer and reader held a spline's degree to 7, the value MAX_BEZIER_DEGREE had before
#1642 raised it to 9. A G4 blend (one Bézier of degree 9) was written as a degree-7 SPLINE over
its first 8 control points, so a flat pattern's cut-out stopped 4.444 mm short in the file.

- seg_shape takes its limit from MAX_BEZIER_DEGREE: a Bézier is written whole, at its own degree.
- read_dxf reads SPLINE degrees 1 to MAX_BEZIER_DEGREE, the degrees a sketch spline takes.
- Tests: every Bézier degree 4 to 9, a degree-9 round trip, the reader's degrees, hostile SPLINE
  degrees and too few control points, the G4 cut-out exported and read back with its areas, and a
  degree-9 SPLINE with 2 to 10 points inserted into a sketch.

Fixes #5269

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Renaming a plane keeps its projections, canvases and hidden state (#4353) (#4354)

* claim: #4353

* Renaming a plane keeps its projections, canvases and hidden state (#4353)

timeline.rename only renamed the feature in other features' references. A sketch's
projection of a construction plane, a canvas placed on it and the hidden list keep it
by name too, so they lost it: the sketch warned that the plane no longer exists, the
canvas left the view and a hidden plane showed again. Document::rename_feature_keys
renames it in sketch links and canvases, as rename_body_keys does for bodies; the
selection follows in the command, and the hidden list in Session::refresh_from, so a
hidden plane stays hidden through undo and redo too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: add Rename and Delete to feature menus (#3839, #4343) (#4342)

* claim: #3839

* fix(ui): add Rename and Delete to browser feature menus

* Browser: a second click on a Document Settings entry closes its window (#4150) (#4152)

* claim: #4150

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: a second click on a Document Settings entry closes its window (#4150)

Each entry under Document Settings only opened its window. A second click on
Units closed the menu on the press (the row is outside it) and opened it again
on the release; Precision left Preferences open; Parameters and Design
Properties came back as a fresh copy. Now a click on an entry whose window is
open closes it the way the window's own x does:
- Units: context_menu::toggle_for with the row as the opener, the fix #1522
  made for the workspace button's menu. A right-click still opens it at the
  pointer.
- Precision: prefs::close(app, true), the Cancel/x path that puts back what
  changed since the window opened (now pub(crate)).
- Parameters and Design Properties: the window is dropped, as its x does. A
  Parameters value typed but not applied yet is dropped with it, as today's
  second click already drops it.

Fixes #4150

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Preserve expression-positioned sketch fillet corners (#4097) (#4106)

* claim: #4097

* Sketch fillet keeps a corner placed by an expression (#4097)

Filleting a corner whose position comes from parameter expressions deleted
the point and its expressions, so the sketch gained two degrees of freedom
and later parameter changes distorted the outline. keep_corner now also
keeps fixed or expression-positioned points as virtual sharp corners.

* Fix feature editor picks after upstream sketch resizing (#4083) (#4084)

* claim: #4083

* Feature editors refill named edges and faces where they are now (#4083)

After an upstream sketch change, Fillet, Chamfer, Shell and Draft evaluated
correctly, but their editors refilled the originally clicked points and
could then fail with "no edge at ...". Resolve the stored names through the
document's naming helpers first, keep the resolved index, and map the pick
into the displayed body's frame; the point lookup stays as the fallback.

* ui-egui tests: clear the texture deltas of the frames they run (#4039)

Nine tests dropped an egui frame's output with its texture delta still
unapplied (the expression completion editor's frames, the slot preview's
three, the browser's feature rows). epaint asserts against that in debug
builds, so they failed under the dev profile and passed only where debug
assertions are off. They clear the delta as the other tests do; one more
hover test that dropped its output the same way does too.

* Frames: profile library, members along frame sketch lines, and the Frame Member dialog (#4003) (#4004)

* claim: #4003

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: the profile library (#4003)

The first slice of frames and weldments: the cross-sections structural members
will be made of, each SolidCraft's own parametric definition built in code
(no vendor or standard size tables are shipped).

- solidcraft_doc::frame: bar, round bar, rectangular and round tube, angle,
  channel, I-beam and a generic T-slot extrusion as exact line/arc regions,
  with defaults worked out from the profile's size, refusals that name the
  dimension that does not fit, anchors and placement, and exact section
  properties (area, centroid, Ixx/Iyy/Ixy by Green's theorem).
- frame.profile.list, frame.profile.properties (with mass per metre for a
  density) and frame.profile.insert (draws a profile into a sketch, locked by
  default, at a point, anchor and angle).
- Tests against hand-computed values (rectangles, circles, composite
  rectangles by the parallel-axis theorem, fillet spandrels), hostile input,
  extrusion volume, undo; catalog entries in every locale; docs/frames.md;
  ROADMAP M15.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: drop the built-in T-slot profile (#4003)

Aluminium extrusions and other vendor sections come from the user's own
sketch (drawn or inserted from the vendor's DXF), so the library keeps the
plain steel shapes only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: members along frame sketch lines (#4003)

frame.member lays one body per straight line of a frame sketch (2D lines or
3D sketch lines), its cross-section square to the line from end to end:

- profile: a built-in profile, or profile_sketch, a sketch whose material
  (nested loops alternating, so two circles make a tube) is the section in
  its own x and y around its origin; profiles picks override it.
- anchor (origin, centre, centroid or a bounding-box corner or edge middle),
  angle (an angle expression, so a parameter), mirror.
- Orientation: the profile's y as near world up as the line allows, x
  square to both; a vertical member's x is world X (frame::member_axes).
- Members follow sketch and parameter edits, undo as one step, save and
  reopen (format: pending/frame-members.rs), and are named after the profile
  (Rect Tube 40x40x3, (2)…), numbering on past names already taken.

Tests against hand-computed volumes and bounding boxes (rectangle, 3D
tower lines, parameter edit, sketch tube profile and picks, anchor/angle/
mirror), refusals, undo/redo and reopen; walk fixtures and goldens; docs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: fixes from the adversarial review (#4003)

- Default member lines are what was drawn: projected and other linked curves
  and 3D wires (a face sketch's edges) and lines of no length are left out.
- A profile sketch's material starts from its drawn profiles, as
  solid.extrude's "all" does, so a section sketched on a face works; the
  even-odd test uses outlines and boxes worked out once, capped at 256.
- Member names are pinned to their lines (`names`, by line id; `body_name`
  is the base): deleting or adding a line, or deleting another feature, no
  longer renames other members, and frame.member stores every name it gives.
  body.rename renames a member on its line (also for later member features);
  a copy whose body_names were set still names its members by position.
- Built-in profile dimensions are expressions (ProfileSpec): they follow
  parameters, bare numbers take the design's units, and they are feature
  inputs. frame.profile.properties/insert read them the same way.
- Default root/toe radii shrink to the room a thick section leaves; radii
  given are checked by name; a radius must be 0 or at least 0.01 mm; error
  messages report the wall or flange value given, not twice it.
- A line within 1e-6 rad of vertical orients as vertical, so rounding never
  turns a post a quarter turn.
- A 2D frame sketch in a differently placed component is mapped into the
  member's frame, and member features recompute when placements change.
- Caps before lookups for a design's `lines`; a line listed twice is
  refused; a 3D wire that runs back on itself is not a line.

Regression tests for each, from the review's scenarios.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: the Frame Member dialog on the ribbon (#4003)

- Frame Member (MODEL > Create) opens a dialog: the frame sketch's lines
  picked in the view (or All Lines), a built-in profile and its dimensions or
  a section picked in another sketch, anchor, angle, mirror and name, with a
  live preview. Edit Feature reopens it filled in.
- Lines picked in the view keep their sketch (a SKETCH_LINES input picks
  ExternalSketchCurve): line ids are each sketch's own, so two 3D sketches
  both have a `w2`, and the members went on the newer sketch's lines.
- timeline.redefine takes frame.member. Members keep their names through an
  edit unless it gives them a new body_name; frame.member takes `names`.
- A member whose section is a whole profile sketch keeps it when edited
  (the dialog shows the sketch instead of picking every region, which would
  fill a tube's hole).
- An original frame_member icon, open for review, on the ribbon, timeline
  and browser.
- The angle profile is listed as L-Angle, and web and flange as Web/Flange
  thickness, so they translate apart from the existing Angle, Web and Flange;
  the dialog's labels are in en, ja and zh. en-GB no longer repeats the frame
  command labels it spells the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Rectangular and circular pattern: copies that miss the body are reported (#3042) (#3919)

* claim: #3042

* Warn when cut pattern copies remove no material

A rectangular or circular pattern whose copies miss the body succeeded silently and those copies did nothing. The pattern now reports how many of its cut copies removed no material, and keeps the copies that land.

* Delete in a rolled-back history warns about the features after the marker (#3471) (#3698)

* claim: #3471

* Delete in a rolled-back history warns about the features after the marker (#3471)

With the timeline rolled back, the checks a delete runs first (the
confirmation's "these features will fail", timeline.dependents and
selection.delete's would_fail) compared models evaluated only up to the
marker. Features after it, broken by the delete, were not listed, so their
error marks turned up only once the timeline moved to the end.

newly_broken_in_history evaluates both sides over the whole history when
either has a marker (on copies; the model and document are unchanged) and is
used by the delete's report and by timeline.dependents.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* macOS: Fusion navigation preset does not support Shift + two-finger orbit (#3446)

* Macos: keep touchpad/key modifiers true to fusion

* fix: remove obsolete orbit snap reset from trackpad navigation

Upstream removed ViewportState::orbit_snap. The new trackpad orbit path retained one reference, causing E0609 in the PR merge build.

Validation: all seven trackpad tests pass; cargo check -p solidcraft-ui-egui --all-targets passes on the exact failing CI merge 66a2791b with this fix applied; rustfmt and diff checks pass.

Co-Authored-By: GitHub Copilot <noreply@github.com>

* fix: retain Fusion trackpad help in refactored preferences

Preserve upstream's new preferences pages and apply the translated Fusion trackpad tooltip in prefs/navigation.rs.

Validation: cargo build -p solidcraft passed. Tests and full CI were not run, as requested.

Co-Authored-By: GitHub Copilot <noreply@github.com>

* style: format Fusion trackpad preferences tooltip

Apply rustfmt's required wrapping for the relocated tooltip. No behavior changes.

Validation: cargo fmt --all -- --check and git diff --check passed.

Co-Authored-By: GitHub Copilot <noreply@github.com>

---------

Co-authored-by: GitHub Copilot <noreply@github.com>

* 2-point circle takes a typed diameter (#3278) (#3335)

* claim: #3278

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 2-point circle takes a typed diameter (#3278)

After its first point the 2-point circle tool showed no value box, so the
circle could only be sized with the cursor. It now shows a Diameter box,
like the centre circle: the typed value puts the second point that far
along the cursor's direction, and Enter draws the circle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Reorder design tabs by dragging them (#3187) (#3188)

* claim: #3187

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Reorder design tabs by dragging them (#3187)

A tab dragged along the strip follows the pointer while the others make
room, and lands where it is released; Escape, or releasing down the
window, leaves the order as it was. With the custom title bar a drag that
starts mostly up or down (or on the only tab) still moves the window.
The control channel's ui.documents gains a move action (from, to).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Renaming a body keeps the evaluated timeline, off the window thread (#2467) (#2468)

* Renaming a body that later features change evaluates nothing (#2467)

Model::rename_body now keeps the results when later features change the
body (a pattern, a chamfer, a join). It still evaluates when a body of
that name comes and goes or isn't the same body throughout, when a later
body's name is worked out from it (X (2)), or when a message quotes it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Rename box: rename off the window thread, and locked bodies follow a rename (#2467)

The rename box commits body.rename through run_heavy, so a rename that
still evaluates later features (one names the body in its targets)
computes beside the window instead of freezing it. Locked bodies now
follow a body.rename from anywhere (the rename box, the control channel,
scripts), not only the rename box.

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Toolbar: a constraint dragged out of the small box becomes a full button (#5254) (#5456)

* claim: #5254

* Toolbar: a constraint dragged out of the small box becomes a full button (#5254)

The Constrain panel's small box of constraint icons was a fixed list, so
dragging one onto the full-size buttons saved a new order but it was still
drawn in the box. The toolbar settings now remember, per tab, which box
commands were moved out; those are drawn as full buttons, the box closes
up, and dropping one back on a box icon returns it. Reset Toolbar restores
the default box, and settings saved before this load unchanged.

* Sketch offset keeps its source lines free to turn (#4464) (#4466)

* claim: #4464

* Sketch offset keeps its source lines free to turn (#4464)

An offset adds a Parallel between each source line and its offset line.
Since offsets became associative, the offset's points are held during a
solve, so each Parallel pinned its source line to the offset line's
current direction: a closed chain lost its turning freedom (8 degrees of
freedom became 6), and Horizontal or an angle edit on a source line was
refused as conflicting.

The solver and the constructive reading now leave out a Parallel that
ties an offset line to the source it follows while the association lives;
the association already keeps them parallel. After Break the stored
Parallel drives again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Flat Pattern view draws perforations (#4440) (#4441)

* claim: #4440

* Flat Pattern view: draw perforation holes (#4440)

The flat view drew the outline, cut-outs, pockets and bend lines but not
perforation fields, though the flat-pattern data and the DXF export list
their holes. The view now reads the hole centres from the sheet through
SheetBody::perforation_holes, caches them per model state and body, and
draws them as circles in the cut-out style. Holes outside the viewport or
smaller than one pixel are skipped, and the cache is capped at one million
holes.

* "Don't Save" looks like a button in the Save changes prompt (#4380) (#4400)

* claim: #4380

* "Don't Save" looks like a button in the Save changes prompt (#4380)

The prompt's third action used the kit's low-emphasis text style, so it
didn't read as clickable and people thought Cancel was the only way out.
Add an opt-in secondary_left style to the confirm footer (a framed
secondary button from the theme tokens) and use it for Don't Save.

* Save prompt test: clear each frame's texture delta once it is applied

egui 0.36 panics when a TexturesDelta with unapplied deltas is dropped;
the test kept only the last frame's output and dropped the earlier ones.

* 3D mouse test: clear the frame's texture changes, so it passes in debug builds (#4382)

each_frame_hands_the_view_its_motion_through_the_drivers_mapping dropped
the output of a frame it ran (`let _ = ctx.run_ui(...)`). epaint panics
in debug builds when a TexturesDelta is dropped with deltas left ("Dropped
TexturesDelta with 1 unapplied deltas"), so the test failed under a plain
`cargo test` on every platform while the ci profile passed. It now clears
them, as the other UI tests do since #60.

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Spanish (es-ES): catch up with en.json (#4292)

Co-authored-by: carlymx <24634598+carlymx@users.noreply.github.com>

* Esc ends the navigation bar's Pan, Orbit and Zoom modes (#4226) (#4233)

* claim: #4226

* Esc ends the navigation bar's Pan, Orbit and Zoom modes (#4226)

The nav bar toggled a mode on, but nothing cleared it on Esc, so a left drag
kept panning, orbiting or zooming. Esc now ends an active nav mode first;
the next Esc reaches the tool or dialog as before.

* Keep long Select Other labels inside the popup (#4209) (#4225)

* claim: #4209

* fix(ui): bound Select Other labels and expose full names (#4209)

* Deleting an inserted file removes its components, placements and joints (#4100) (#4113)

* claim: #4100

* Deleting an inserted file removes its components, placements and joints (#4100)

A STEP or mesh file inserted into a design makes a component tree. Deleting
its feature left that tree behind: the components, their occurrences, the
rigid joints that hold them and the bodies' component assignments. A later
body that took an imported body's name was then placed in the stale component.

Document::remove_component_tree removes a component subtree and everything
that refers to it: the features made inside it, its occurrences, the joints
on them with their motion links, joint origins, contact set members, motion
study keys and exploded moves, body component and offset entries, standard
part and link records, and configuration columns. Deleting an inserted
file's feature and component.delete both use it; component.delete now also
removes joints left pointing at a deleted occurrence. The body transfer
refusal moves with it, unchanged.

* Only an inserted file's feature takes its component tree when deleted

Mark the feature a STEP, IGES or mesh insert makes (`inserted`), and remove
the component tree on delete only for those and for a linked design's
feature. Deleting a copied component's independent base deletes just that
feature, as before. Older designs get the mark as they open (pending format
change), except copied components' independent bases.

* Rigid joint saved with the wrong occurrence when two occurrences share a component (#3857) (#3939)

* claim: #3857

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Joint dialog: a body of a further instance picks that occurrence, not the component's first (#3857)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>

* Cancel Sketch: leave a sketch without keeping its changes (#3838) (#3938)

* claim: #3838

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Cancel Sketch: leave a sketch without keeping its changes (#3838)

sketch.cancel (Cancel Sketch, ribbon Exit group and the sketch's
right-click menu) puts the design back as it was when the open sketch
was created or opened for editing: a new sketch is removed with its
dimension parameters, an edited one returns to how it was. It is one
undo step, so Undo goes back into the sketch.

The session remembers the design and the undo history at the point a
sketch is entered. Cancel uses that only while the history still runs
through it (the same steps before, every step since taken in this
sketch); otherwise it refuses and points to Undo, so a stale entry can
never throw away later work.

The icon is the approved close glyph in the sketch accent (alias
sketch_cancel); ja and zh carry the new label.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF import: name a Bambu Studio project's bodies after its objects (#3858) (#3859)

* claim: #3858 (3MF import: names from a Bambu Studio project)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF import: name a Bambu Studio project's bodies after its objects (#3858)

Bambu Studio leaves the name off the root model's objects and keeps it in
Metadata/model_settings.config (<config><object id="N"><metadata key="name">),
so every object of a project came in as Mesh1, Mesh2, ... A build item whose
root object has no name of its own now takes the object's name from those
settings. A name in the model still comes first, and part names, other
settings and objects of other model parts are left alone.

The settings are read only when a body needs a name, within what the model
parts left of the 1 GB budget. Settings that can't be read (malformed, nested
too deeply, too large) never fail the import: the bodies keep the generic
names, with a warning saying why.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport: right-click keeps a multi-selection of faces and edges (#3733) (#3788)

* claim: #3733

* Viewport: right-click keeps a multi-selection of faces and edges (#3733)

---------

Co-authored-by: AhmetV <344941595+ahmetv10@users.noreply.github.com>

* Parameter import and image pickers offer their own file types (#3216) (#3314)

* claim: #3216

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Parameter import and canvas image pickers offer their file types (#3216)

Both opened the picker with no file type of their own, so it listed only
designs, CAD files and meshes (and All files). macOS lets you pick only
the types a filter names: CSV parameters, and PNG or JPEG images for a
canvas, were greyed out. They now ask for csv/json and png/jpg/jpeg,
which the picker lists first (#1801).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Return to the originating tab after finishing a sketch (#3250) (#3264)

* claim: #3250

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Return to the originating toolbar tab after finishing a sketch (#3250)

A sketch started from SHEET METAL or PLASTIC always ended on the SOLID
tab. Remember the tab that was active when the sketch began
(UiState::sketch_return_tab, not saved) and go back to it when the
sketch ends. Falls back to SOLID when that is not one of the normal
toolbar tabs. A sketch started from SOLID behaves as before.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Test: no one-element loop in the return-tab test (clippy single_element_loop)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>

* STEP import: let a cancelled import release the import slot (#3171) (#3189)

* claim: #3171

* Release cancelled file import slots (#3171)

* Dragging a part along its joint no longer highlights what's under the pointer (#5137) (#5140)

* claim: #5137

* Dragging a part along its joint no longer highlights what's under the pointer (#5137)

The viewport's hover pick was skipped during a box selection and camera
moves, but not while a jointed part was dragged, so faces and edges under
the pointer lit up on every frame of the drag. The pick now waits until
the joint drag ends.

* Browser: a body picked in the viewport is opened to and scrolled to (#3005) (#3081)

* claim: #3005

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: a body picked in the viewport is shown in the Browser (#3005)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Merge main; viewport::select takes a toggle flag now

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Line tool snaps a diameter through the circle centre (#4326) (#4327)

A line drawn across a circle only snapped its end onto the curve, so a
diameter could miss the centre at any angle. Near the centre the line now
locks onto the radial line: on the rim it stays on the circle and the centre
is kept on the line, and on the centre point the end lands there.

* Flatpak: find the host's fonts for CJK text and the font list (#5124) (#5127)

* claim: #5124

* Flatpak: find the host's fonts for CJK text and the font list (#5124)

Inside the Flatpak sandbox the host's fonts are mounted at /run/host/fonts
and /run/host/user-fonts, which no font search looked at. Japanese and
Chinese text fell back to boxes, and the font list missed the host's
families.

- Search both folders for the CJK and Chinese fallbacks and for the
  installed-font list.
- The CJK fallback reads SOLIDCRAFT_FONT_DIRS (a path list, as the font
  list already does), with CRAFT_FONTS_DIR kept as a fallback.

* Crash reports: keep component.activate in the journal (#5079) (#5121)

* claim: #5079

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Crash journal keeps component.activate (#5079)

Activating a component changes only the session's active component and
occurrence path, not the design, so the journal dropped the command and a
crash report's replay built later parts under the previously active
component. The journal now also keeps a command that changes either.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Control channel and MCP on by default, with a setting to turn it off (#5561)

The app opens its localhost control channel on port 27878 (or the next free
one) unless Preferences > Assistant turns it off; --control and
SOLIDCRAFT_CONTROL_PORT still win. A current.port discovery file lets
solidcraft-cli mcp find the running app with no arguments.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>

* Tests: moving an occurrence recomputes only the cuts and joins it touches (#4965) (#4982)

* claim: #4965

* Joins and cuts follow only the placements they depend on (#4965)

Tests that turning a joint between parts cuts no hole again, and that a
tool cutting another part cuts again when that part moves relative to it,
while an unrelated part moving keeps the result.

Booleans and Combine now hash only the placements of the bodies they take
as inputs, relative to the frame that evaluates them (#3397), so these
pin that behaviour for joins and cuts with named targets across parts.

* fix(ui): preview shortcut chords and wait for complete modifier input (#1810)

Keep physical modifier events out of the ordinary-key slot, preview held keys immediately, and confirm after release and a one-second settling interval. Preserve legacy control-channel modifier behavior while allowing explicit physical Control/Command input. Add regression coverage, a UI scenario, localized guidance and documentation.

Fixes #1809.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>

* Move: scope box selection to the active component (#4459) (#4527)

* claim: #4459

* fix: scope Move box selection to active component (#4459)

* Delete removes a selected construction axis (#4692) (#4695)

* claim: #4692

* Delete removes a selected construction axis (#4692)

Delete on a construction axis skipped it with "the origin axes can't be
deleted". It now deletes the construction axis feature, like construction
planes; the origin axes X, Y and Z are still refused.

* Agent chat: end the agent's process group where `kill` is busybox' (#4587) (#4588)

* claim: #4587

* Agent chat: end the agent's process group with the system call (#4587)

The group was signalled with a `kill` program: `kill -s TERM -- -<pgid>`.
That works with procps' `kill` and with BSD's, but busybox' `kill` takes no
`--`: it prints its usage, exits 1 and signals nothing. The agent's helpers
(the CLI an adapter wraps, the MCP servers it starts) then stay alive after
the agent is ended.

The group is signalled with the system call instead, so no `kill` program and
no shell are needed and the behaviour is the same everywhere. `nix` (MIT) is
already in the tree through zip, and only on Unix: the browser build does not
take it.

The two tests that cover this now pass where they failed before:
`agent_chat::process::tests::dropping_the_process_ends_its_group` and
`agent_chat::process::tests::stopping_the_agent_leaves_no_helpers_running`.

* Extrude: picking a face, vertex or parallel plane off the profile switches the extent to To Object (#2855)

* Extrude: picking a face, vertex or parallel plane off the profile turns the extent to To Object

With profiles picked, a face off their plane (or curved), a vertex off it, or a
construction plane parallel to it is taken as the To Object target instead of
another profile: the extent switches without the Extent Type choice, and the
distance shows how far the target is. Coplanar faces still join the profiles.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Extrude: automatic To Object is a Preferences setting, off by default

Preferences > Design > "Extrude to a picked target" (`extrude_auto_to_object`, default
false) turns the automatic To Object on. Off, picks in the Extrude dialog only add
profiles and the distance is not synced to a target, as before this change.

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>

* Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci]

* FreeCAD/Rhino import: decode caps with room for detailed parts (#1783) (#3209)

* claim: #1783

* FreeCAD/Rhino import: decode caps with room for detailed parts (#1783)

cadmpeg decoded FreeCAD and Rhino files under its service profile, whose
million collection items and 2.56e8 work units a detailed part (a sprocket,
a threaded rod, a part with a few hundred faces) runs past: the import was
refused with "resource limit on CollectionItems: BudgetExceeded". Allow
8 million items and 2e9 work units, half of cadmpeg's desktop profile; the
input-size cap stays SolidCraft's STEP limit and every other cap stays at
the service profile's.

decoding_is_capped checks the two raised caps (and that they stay below the
desktop profile's) and that every other cap is still the service one.

Fixes #1783

* A spherical shell revolves into a solid with a void, and cuts and joins with hollow tools work (#451) (#4182)

* Assembly: ground the first part; drag free joint chains (#2804) (#2805)

* assembly(feat): ground first parts and drag free joint chains

Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* assembly(fix): update movable fixtures for first-part grounding

Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* assembly(test): keep the motion-cost crank free

Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* assembly(test): free the frame placement fixture

Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main.

Signed-off-by: Karl Von Richter<karl@embeint.com>

---------

Signed-off-by: Karl Von Richter<karl@embeint.com>

* UI: integrate theme radii, borders, palettes and viewport refresh (#5045) (#5046)

* claim: #4922

* UI: let themes own corner radii

* UI: use four-point panel and window radii in SolidCraft 95

* UI: align the 95 radius assertion with four-point panels

* claim: #4953

* UI: let themes own structural and control borders

* UI: single Blueprint outlines and dotted secondary rules

* UI: separate container outlines and add theme-owned 95 bevels

* claim: #5007

* UI: apply theme palettes to icons, workspace tabs and Gruvbox settings

* claim: #5045

* Viewport: invalidate cached geometry colours when the theme palette changes

* UI: preserve legacy theme logo colours with the borderless mark

* Section Analysis: OK with no plane picked turns the section off (#2410) (#2411)

While a section is on, Section Analysis opened with no plane picked now
says "No plane picked: OK turns the section off." and OK runs
inspect.section {"clear": true}. With no section on, OK with no plane
still asks for a plane.

Fixes #2410.

* Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci]

* Close Change Parameters with Escape (#3372) (#3399)

* claim: #3372

* Fix Escape cancellation in Change Parameters

Consume Escape before parameter editors can commit pending text on focus loss, while preserving autocomplete and shortcut capture priority. Add 11 UI regressions covering draft cancellation, preview cleanup, document and history preservation, and reopening saved values.

* Preserve construction references when axes and points are renamed (#4419) (#4449)

* claim: #4419

* fix: preserve renamed construction references (#4419)

* Browser: route body picks into open command dialogs (#2560) (#4371)

* claim: #2560

* fix(ui): route Browser body picks into active dialogs

* Fix midpoint picks in sketch dimensions (#4872)

Retain MID snaps across both picks and materialize reusable midpoint
constraints for point-to-line and point-to-point dimensions. Let midpoint
pairs choose horizontal or vertical spans with pointer placement before
entering a value.

Cover projected model edges, overlapping geometry, helper reuse,
undo/cancel/reopen, and existing angular and line-circle workflows.

* Sketch slots: provide typed dimension inputs for every variant (#2423) (#4318)

* claim: #2423

* fix(sketch): add typed dimensions to every slot tool (#2423)

* Version 0.21.0 on main (released from rc.2's code) (#5774)

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* docs(mcp): Windows setup for Claude Desktop (#3794)

* docs(mcp): Windows setup for Claude Desktop (paths, two servers, Store config file)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs(mcp): say the Store build can keep the config elsewhere, not that the other path fails

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci]

* MCP: wait out long requests, honest batch outcomes, batch tool aliases (#2901)

Rebased onto main as one commit (was 120d26f7, df488f9a, db9d1073 plus
merges of main).

- A request the app reports as still running (#1618) is waited for on the
  same connection through `control.pending`; past the wait the error says it
  was not cancelled and will still apply (or only write its file), later calls
  are not sent behind it, and the new read-only `pending` tool returns its
  result once it lands.
- A failed batch says what really happened: `rolled_back` only when the
  design is back where the batch started (as #3288 / #3242 on main: the app's
  `rolled_back` is believed; for an older app, every completed step undone;
  only a rollback asked for is reported as one), plus `applied`, `not_run` and
  `failed.still_running`.
- A batch step may name a tool (set_parameter, list_commands,
  describe_command, execute, measure, inspect_design, undo, redo, export, save,
  open, new_design, crash_reports); screenshot, body_topology, batch and
  pending are refused before anything is sent.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: driver choice, guided calibration, button mapping and a picture of the device (#1463) (#3825)

* Add a small test boat to steer around with the 3D mouse

A little hull in its own camera, drawn by the UI itself and not the CAD
viewport, so a 3D mouse can be tried out without opening a design. It
brings the model (generated by assets/models/make_test_boat.py) and the
tests for how the camera moves it.

Nothing uses it yet; Preferences picks it up with the rest of the 3D mouse
work.

* UI kit: keep a choice row from flipping with the scrollbar

A choice row picks segments or a dropdown by whether its labels fit. A page
scrollbar that comes and goes narrows the row by its own width, so the row
could flip back and forth between the two on a page that sits right at the
edge. It is now judged on the whole row and through a small helper,
fits_steadily, that only changes its answer once the miss is wider than the
scrollbar.

Also tests for that, for typed numbers in a slider's value box, and a
test hook to put up the issue-report input barrier by hand.

* 3D mouse: device model, guided calibration, buttons and a picture

The 3D mouse becomes a device we know something about instead of six raw
numbers.

The reader picks between spacenavd and the direct hidraw driver, falls back
from one to the other, and says so when it can't open the device. Guided
calibration asks whether the device is a spring cap or a trackball, adds a
touch step, and uses a settle filter so a ball let go of stops reading as
motion. Buttons get jobs (keys, held modifiers, commands), saved per
device, with defaults for the SpaceMouse Pro.

Preferences gets a picture of the device that moves as it does, next to the
test boat, and the same picture can sit in the 3D view at Left Viewport,
Right Viewport or Left Window, above the floating History card like the
legend and readouts.

These ride together because the crate's calibration types, the Preferences
page, the Linux reader and the button hook all use each other.

* 3D mouse: offer to calibrate an uncalibrated device

When a 3D mouse shows up that has not been calibrated, a card in the 3D
view offers to calibrate it, to swap drivers when the other one would work
better, to close, or to never ask again. It is made once per device, goes
away after 30 seconds in view, and gives way to a status or computing
toast instead of stacking on it.

The card is the shared toast, which now takes buttons: they group by
purpose, wrap inside the card at narrow widths, and do nothing while an
issue report holds CAD input. The picture of the device in the 3D view
keeps clear of the card.

* 3D mouse: translations and attribution

The 3D mouse strings (ui.3d_mouse_*, the calibration steps and the offer
card) in every shipped language, the Japanese catalog note, and the credit
for the test boat model in ATTRIBUTION.md.

This is last because the code before it only looks keys up: it builds and
runs without these, falling back to English until they land.

* 3D mouse: draw its preferences with the settings kit like the rest of Navigation

The 3D mouse section was a folded header with its own layout. It now
uses the same kit as the sections above it: a settings_section card,
settings_form rows with the shared label column, dividers between the
device, axes, picture and buttons groups, Text::Hint for the helper
lines, and settings_control_width for the dropdowns.

The section is open like every other one (the header still folds it),
so the device badge on the folded header is gone; the calibration row
already names the device. Every setting, string and key is unchanged.
Tests that unfolded the section no longer click it, and the hint lines
are looked up as hints instead of notes.

* 3D mouse: show each axis's live tilt in Preferences, like main's axis rows

Each view axis row is main's axis row again: a meter that follows the tilt of the motion driving it, with the dead zone marked, next to Invert, Speed and the "driven by" menu. The meter reads the calibrated travel when the device has a calibration and the raw reading over full scale when it does not, and asks for a frame whenever the reading changes. The helpers are back as they are on main, and the calibration state is a badge by the enable toggle.

* 3D mouse: line its preferences up with the rest of Navigation

- The two checkboxes sit side by side in the same two-column grid as Wheel and trackpad.
- Row labels stop repeating "3D mouse" and use sentence case: Calibration, Driver, Restore defaults, Reset view, Left viewport, Right viewport, Left window.
- Hints line up under the control column instead of the left edge.
- The six view axes are named Pan X, Pan Y, Zoom, Orbit X, Orbit Y and Roll so they fit the name column.
- Buttons are a divider and rows in a form like the other groups, without the bold sub-heading.
- The driver, dead zone, axes, picture and buttons sit behind a collapsed Advanced section, since most people never touch them.

* 3D mouse: tidy the Advanced test for clippy

* Timeline: suppressing a feature keeps later features' body names (#4302) (#4311)

* claim: #4302

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Timeline: suppressing a feature keeps later features' body names (#4302)

Bodies numbered by the counter (`BodyN`) take the next free number on every
recompute, so suppressing a feature that made one moved every later counted
body down one (`Body2` became `Body1`) and broke what named it, such as a
Move of `Body2`. timeline.suppress now stores the current names of later
features' counted bodies in their `body_names` first, as body.rename already
does for a renamed counted body (#1109). Engine only: no evaluation or
design-format change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Timeline: a body made while a feature is suppressed keeps its name (#4302)

Suppressing a feature freed its counted name (`Body1`), so a body made
meanwhile took it and became `Body3` once the feature was back. Suppress
now also stores the suppressed feature's own counted names, and the
evaluator adds the names stored on earlier suppressed features to the
state's `reserved_body_names` (the names a rename freed, #4957), which the
`BodyN` counter passes by. They are taken from the design before each
feature is computed and are part of the state digest, so a cached result
is only reused when they match.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* cadmpeg 0.6.3: FreeCAD and Rhino import in the browser too (#4482)

cadmpeg 0.6.3 is pure Rust (ruzstd instead of the zstd C library, zip 9), so
solidcraft-io depends on it on every target and the wasm build reads .FCStd
and .3dm files like the desktop app. The browser's file pickers offer them.

0.6.3 replaces DecodeOptions::container_only with a decode depth; ask for
Geometry, what its STEP writer reads. zip 8 leaves the tree, and with it the
three cargo-deny advisory exceptions kept for it.

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Pattern dialogs: Quantity fields get up/down step arrows (#4260) (#4264)

A new kit control, `ui_kit::count_field` / `count_row`, is an expression field for a
whole-number count with stacked step arrows at its right edge. An arrow steps the
evaluated count by one within the field's limits: a plain number is replaced, an
expression keeps its parameters and gains or adjusts a trailing `+ n`. The text
changes as typing changes it, so the live preview follows.

Used by the Quantity rows of the sketch Rectangular (1-500, both directions together
at most 500) and Circular (2-500) patterns, and the solid Rectangular, Circular and
Path patterns (1-1000).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci]

* Join: say so when the joined piece doesn't touch the body (#4434) (#4436)

* claim: #4434

* Join: say so when the joined piece doesn't touch the body (#4434)

A Join (extrude, revolve, sweep, loft, pipe, coil, primitives, thicken,
boundary fill, surface network) whose material meets none of its targets
still joins it to the first target as a separate piece. The result stays
as it was; the feature now warns: "the joined piece doesn't touch `Body1`,
so `Body1` is now in 2 separate pieces (New Body makes it a body of its
own)". History marks it and the command reply carries it.

The check compares pieces (outer shells, not voids) of the bodies the
feature changed or absorbed before and after it, so it holds for the
batched multi-profile path too, stays quiet for a join that bridges
pieces or closes a cavity, and leaves Combine (which joins the bodies it
is given) alone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Hole: snap to face and round-edge centres, drag placed holes, section in the dialog (#2171) (#2912)

Placing a Single hole put it exactly where the click landed, with nothing to line it up by and no
way to move it but taking it out and picking again; the dialog was a list of size fields.

- Preferences › Design › Create Hole has two settings, both off by default, so a new installation
  places holes as before:
  - Snap to face and edge centres (`hole_snaps`): the planar face under the cursor offers its
    middle and the centres of its round edges (a boss, a rounded corner, a hole already there) as
    marks; a pick near one, or on or beside such an edge, takes that centre and the mark is named.
    Sketch points on the face still come first; Alt or Ctrl held places it where clicked.
  - Move holes by clicking or dragging (`hole_moves`): each placed hole has a handle that drags it
    (snapping when snaps are on) and takes it out when clicked, and a pick elsewhere on its face
    moves it there. Edit Feature shows the handle too, so a hole can be moved later (#1047).
- The Hole dialog draws a section of the hole as its options make it, with each size in a field
  beside the dimension it sets; a hovered or focused field lights its dimension. The layout is a
  new kit element, `ui_kit::figure_rows` (a caller-painted figure beside captioned fields).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Hole: place a Single hole by distances from reference edges (#37) (#2931)

A Single hole can take up to two straight edges of its face as references,
each with the distance of the hole's centre from that edge's line, measured
in the face's plane. `solid.hole` takes them as `references: [{edge, distance}]`;
the edges are found again by their persistent names, else their points, so
the hole follows them when the part changes, and each distance is a
parameter. A bad reference (no edge there, a curved edge, one square to the
face, parallel edges, a negative distance, a centre off the face) is refused.

In the Hole dialog, Reference 1 and 2 follow the face, each with its Distance
row; the canvas shows each distance as a dimension from its edge to the hole,
with a box just past the edge to type it in. Picking an edge measures its
distance (and its box takes the keyboard), typing one moves the hole, and
moving the hole measures them again. Edit Feature picks the edges again with
their distances.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

---------

Signed-off-by: Karl Von Richter<karl@embeint.com>
Co-authored-by: Frank <58932224+plexi32@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: raykholo <raykholo@users.noreply.github.com>
Co-authored-by: CamWight <91156642+CamWight@users.noreply.github.com>
Co-authored-by: SS-EN <84559909+SS-EN@users.noreply.github.com>
Co-authored-by: Colin Faulkingham <colin.faulkingham@gmail.com>
Co-authored-by: Karl Von Richter <karl@von-richter.net>
Co-authored-by: HiroKenEz <59478073+HiroKenEz@users.noreply.github.com>
Co-authored-by: Peppe Bergqvist <p@bergqvi.st>
Co-authored-by: GitHub Copilot <noreply@github.com>
Co-authored-by: phanoob <lesur.Stephane@wanadoo.fr>
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Kai Evans <nemshilov@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Tyler Chiriboga <tylerchiriboga.apps@gmail.com>
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: CaRLymx <carlymx@gmail.com>
Co-authored-by: carlymx <24634598+carlymx@users.noreply.github.com>
Co-authored-by: Loohi <78334654+Loohi@users.noreply.github.com>
Co-authored-by: leValdemar19 <valdemarnord@hotmail.com>
Co-authored-by: AhmetV <mihendiz10@gmail.com>
Co-authored-by: AhmetV <344941595+ahmetv10@users.noreply.github.com>
Co-authored-by: rlartot <94693724+rlartot@users.noreply.github.com>
Co-authored-by: Christian Svensson <blue@cmd.nu>
Co-authored-by: Thodoris Tsagkogeorgas <thodoristsagko@gmail.com>
Co-authored-by: ahmetalpcelik <80778880+ahmetalpcelik@users.noreply.github.com>
Co-authored-by: ealitt <ealitt@gmail.com>
Co-authored-by: Homero Thompson <vdirienzo@gmail.com>
Co-authored-by: Diogo Soares Rodrigues <dsrodrigues20@gmail.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Artem Sushchev <Suschev.Artem+github@gmail.com>
Co-authored-by: Nathan Dane <nathandane.dev@gmail.com>
Co-authored-by: Kai Evans <hi@kaievans.co>
Co-authored-by: Victor Santos Oliveira <56417388+Vittuu@users.noreply.github.com>
Co-authored-by: cronos <crono2250@users.noreply.github.com>
Co-authored-by: rbousigues88 <rbousigues@gmail.com>
Co-authored-by: The Nomad <nomad@positron3d.com>
Co-authored-by: Jackson Oursland <jacob.oursland@gmail.com>
Co-authored-by: Jacques <59315319+Jacquesvdberg92@users.noreply.github.com>

* feat(render): reconcile definition-local visual mapping (#1214) (#1223)

Retain the original mapping implementation, all eight analytic/hostile-input tests and mapping contract byte-for-byte from #1223. Reconcile only module registration and the current roadmap on render. Actual current render library 166/0; strict all-target render Clippy, wasm32 and repository gates pass. No persistence, sampler, new capability, kernel/vendor change or external code is added. Historical mixed-base full-CI failures are not relabelled.

* feat(render): add bounded linear film accumulation (#1696) (#1697)

Extract the independent FilmAccumulator from owned donor 3b892eab5e. Keep the existing job cancellation and caller-owned admission/work contracts. PNG resolution, primary camera coverage and progressive consumer wiring remain separate. Add analytic statistics, atomic refusal, allocation/range boundaries and real 4096/1048576-count tests. No kernel, document schema, workflow or capability change.

* Sync main into render and preserve GPU CLI help (#5976)

* CLI: --help on each subcommand prints its usage and exits 0 (#4538) (#4545)

* claim: #4538

* CLI: --help on each subcommand prints its usage and exits 0 (#4538)

Every command now answers `--help` and `-h` with its own usage on stdout and
exit 0, the way the top level has since #1828. Before, each subcommand
answered differently: `fuzz --help` started a fuzz run with the default seeds
and ran until it was stopped, `recipe --help` took the flag for a file name,
and `snapshot`, `render`, `oracle`, `run`, `eval`, `script` and `crashes`
answered with an error on stderr and exit 1.

The help is read before the command runs, so `--help` never starts work: no
fuzz run, no MCP server, no file read.

`fuzz` also refuses an argument it doesn't take, as `snapshot` already did: a
flag it doesn't know and a stray word are errors, not arguments to ignore
while a hundred seeds run.

The usage lives in one place now: each command's lines are a constant, and the
top-level usage is composed from them, so the two cannot drift apart. The
top-level usage is unchanged, byte for byte.

# Conflicts:
#	apps/solidcraft-cli/src/main.rs

* Renaming a parameter follows it into sheet-metal and plastic rules and canvases (#4420) (#4423)

* claim: #4420

* Renaming a parameter follows it into sheet-metal and plastic rules and canvases (#4420)

Document::rename_param rewrote other parameters, feature inputs, dimensions,
configurations and joints, but not the expressions of sheet metal and plastic rules or
the plane a canvas lies on, so after a rename the sheet metal and plastic features
using them failed with "unknown parameter" and the canvas left the view. It renames
them there now, and param_users lists them (a rule's field, a canvas's input), so a
parameter they use can't be deleted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Parameters: rules' features in drives and the graph; shared rule field lists (#4420)

A sheet metal or plastic rule that uses a parameter makes the sheet metal (or plastic)
features rebuild when it changes, so parameters.users lists them in drives and
parameters.graph links them. SheetRule::fields/fields_mut and PlasticRule::fields_mut
replace the hand-written copies of the rules' fields in params.rs, eval.rs and
sheet.manage_rules. Suggested by @CamWight.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fmt (#4420)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Mirror and pattern: a pattern or mirror feature as the source (#395) (#3998)

* claim: #395

* Mirror and pattern: a pattern or mirror feature as the source (#395)

A pattern or mirror of features refused another pattern or mirror as a
source ("Pat cannot be patterned or mirrored yet"). Such a source now
stands for what it copied: its own sources are replayed at each of its
transforms moved by each of ours, to any depth up to eight. Copies of
a feature picked directly keep the instance numbers they had, so
existing designs keep their face names; copies made through a nested
pattern or mirror are numbered after them, so one feature reached two
ways never names two copies alike. A pattern or mirror of bodies as
the source is still refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Expression completion: keep longer names visible when the typed word is a unit (#3663) (#3664)

* claim: #3663

* Expression completion: keep longer names listed when the typed word is a unit (#3663)

Typing `rad` into an expression box showed nothing because `rad` is the radians unit and
a word that is itself a known token closed the popup. The popup now stays open on such a
word. A complete name (`width` with `width_extra` defined) opens it unarmed: the longer
names are listed with no row selected, Enter submits what was typed and Tab moves on; Up
or Down picks a row, after which Enter or Tab complete it as before. A unit means
something only after a number, so a unit typed anywhere else (`rad` on the way to
`radius`) is a prefix like any other: the popup is armed and Enter completes `radius`
instead of submitting one radian.

A complete token is extended only by names that start with it (`in` lists `inner`, not
`rounding`), a typed unit offers no other units (`in` does not list `inch`), and a unit
right after a number (`2 in`, the form every dialog starts its sizes in) opens no popup at
all, so nothing sits over a dialog's OK button.

Fixes #3663

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>

---------

Co-authored-by: Homero Thompson <vdirienzo@gmail.com>
Co-authored-by: SS-EN <84559909+SS-EN@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Martin Pålsson <martin.palsson@outlook.com>
Co-authored-by: Daniel <daniel.owsianski@gmail.com>

* Render: isolate matched GGX visible-normal sampling (#1654)

Independent numerical constituent of #5493. Part of #1654; the CPU reflection consumer remains #1698, so this does not close its image acceptance. Original sampler, matched PDF and analytic/hostile-input tests are preserved from the reviewed donor. 189 render tests, strict Clippy, wasm32 and repository gates pass; fresh quick run 40086624771 passes. No CI configuration, saved-data or kernel change.

* GPU: match index-matched Fresnel in path and viewport (#6036)

Fixes #6035. Preserve actual GPU/f64 material-oracle checks in both translations. Scoped Vulkan, render, Clippy, WASM and fresh quick checks pass. No CI configuration or gate changes.

* feat(render): expose bounded original appearance recipes (#1722)

* claim: resolve the main/render synchronization conflict for #6050

* Settle appearance panel scrolling before targeting Search (#6079)

* claim: #6076

* test(render): settle appearance scroll before resolving Search (#6076)

Expanded starter swatches moved under the scenario click while the existing scroll animation was active. Advance 20 deterministic harness frames before resolving the Search handle. No wall-clock sleep, timeout change, assertion deletion or production change. Original native reproduction fails at the empty-state assertion; all 124 scenarios now pass with one pre-existing ignored adhoc entry.

---------

Signed-off-by: Karl Von Richter<karl@embeint.com>
Co-authored-by: Victor Santos Oliveira <56417388+Vittuu@users.noreply.github.com>
Co-authored-by: Christian Svensson <blue@cmd.nu>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Codex <noreply@openai.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Jackson Oursland <jacob.oursland@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Frank <58932224+plexi32@users.noreply.github.com>
Co-authored-by: raykholo <raykholo@users.noreply.github.com>
Co-authored-by: CamWight <91156642+CamWight@users.noreply.github.com>
Co-authored-by: SS-EN <84559909+SS-EN@users.noreply.github.com>
Co-authored-by: Colin Faulkingham <colin.faulkingham@gmail.com>
Co-authored-by: Karl Von Richter <karl@von-richter.net>
Co-authored-by: HiroKenEz <59478073+HiroKenEz@users.noreply.github.com>
Co-authored-by: Peppe Bergqvist <p@bergqvi.st>
Co-authored-by: GitHub Copilot <noreply@github.com>
Co-authored-by: phanoob <lesur.Stephane@wanadoo.fr>
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Kai Evans <nemshilov@gmail.com>
Co-authored-by: Tyler Chiriboga <tylerchiriboga.apps@gmail.com>
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: CaRLymx <carlymx@gmail.com>
Co-authored-by: carlymx <24634598+carlymx@users.noreply.github.com>
Co-authored-by: Loohi <78334654+Loohi@users.noreply.github.com>
Co-authored-by: leValdemar19 <valdemarnord@hotmail.com>
Co-authored-by: AhmetV <mihendiz10@gmail.com>
Co-authored-by: AhmetV <344941595+ahmetv10@users.noreply.github.com>
Co-authored-by: rlartot <94693724+rlartot@users.noreply.github.com>
Co-authored-by: Thodoris Tsagkogeorgas <thodoristsagko@gmail.com>
Co-authored-by: ahmetalpcelik <80778880+ahmetalpcelik@users.noreply.github.com>
Co-authored-by: ealitt <ealitt@gmail.com>
Co-authored-by: Homero Thompson <vdirienzo@gmail.com>
Co-authored-by: Diogo Soares Rodrigues <dsrodrigues20@gmail.com>
Co-authored-by: Artem Sushchev <Suschev.Artem+github@gmail.com>
Co-authored-by: Nathan Dane <nathandane.dev@gmail.com>
Co-authored-by: Kai Evans <hi@kaievans.co>
Co-authored-by: cronos <crono2250@users.noreply.github.com>
Co-authored-by: rbousigues88 <rbousigues@gmail.com>
Co-authored-by: The Nomad <nomad@positron3d.com>
Co-authored-by: Jacques <59315319+Jacquesvdberg92@users.noreply.github.com>
Co-authored-by: Martin Pålsson <martin.palsson@outlook.com>
Co-authored-by: Daniel <daniel.owsianski@gmail.com>
2026-10-24 14:21:58 +00:00
Jackson OurslandandClaude Opus 5.5 612d9d08dd cadmpeg 0.6.3: FreeCAD and Rhino import in the browser too (#4482)
cadmpeg 0.6.3 is pure Rust (ruzstd instead of the zstd C library, zip 9), so
solidcraft-io depends on it on every target and the wasm build reads .FCStd
and .3dm files like the desktop app. The browser's file pickers offer them.

0.6.3 replaces DecodeOptions::container_only with a decode depth; ask for
Geometry, what its STEP writer reads. zip 8 leaves the tree, and with it the
three cargo-deny advisory exceptions kept for it.

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-24 03:47:00 +00:00
fa2c1c31f6 3MF import: name a Bambu Studio project's bodies after its objects (#3858) (#3859)
* claim: #3858 (3MF import: names from a Bambu Studio project)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF import: name a Bambu Studio project's bodies after its objects (#3858)

Bambu Studio leaves the name off the root model's objects and keeps it in
Metadata/model_settings.config (<config><object id="N"><metadata key="name">),
so every object of a project came in as Mesh1, Mesh2, ... A build item whose
root object has no name of its own now takes the object's name from those
settings. A name in the model still comes first, and part names, other
settings and objects of other model parts are left alone.

The settings are read only when a body needs a name, within what the model
parts left of the 1 GB budget. Settings that can't be read (malformed, nested
too deeply, too large) never fail the import: the bodies keep the generic
names, with a warning saying why.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:31:27 +00:00
raykholo 1d9bdb1ca3 FreeCAD/Rhino import: decode caps with room for detailed parts (#1783) (#3209)
* claim: #1783

* FreeCAD/Rhino import: decode caps with room for detailed parts (#1783)

cadmpeg decoded FreeCAD and Rhino files under its service profile, whose
million collection items and 2.56e8 work units a detailed part (a sprocket,
a threaded rod, a part with a few hundred faces) runs past: the import was
refused with "resource limit on CollectionItems: BudgetExceeded". Allow
8 million items and 2e9 work units, half of cadmpeg's desktop profile; the
input-size cap stays SolidCraft's STEP limit and every other cap stays at
the service profile's.

decoding_is_capped checks the two raised caps (and that they stay below the
desktop profile's) and that every other cap is still the service one.

Fixes #1783
2026-10-23 14:23:02 +00:00
CamWightandClaude Opus 5.5 e8a6a5d3ff DXF: write and read a Bézier at its own degree (#5269) (#5281)
* claim: #5269

* DXF: write and read a Bézier at its own degree (#5269)

The DXF writer and reader held a spline's degree to 7, the value MAX_BEZIER_DEGREE had before
#1642 raised it to 9. A G4 blend (one Bézier of degree 9) was written as a degree-7 SPLINE over
its first 8 control points, so a flat pattern's cut-out stopped 4.444 mm short in the file.

- seg_shape takes its limit from MAX_BEZIER_DEGREE: a Bézier is written whole, at its own degree.
- read_dxf reads SPLINE degrees 1 to MAX_BEZIER_DEGREE, the degrees a sketch spline takes.
- Tests: every Bézier degree 4 to 9, a degree-9 round trip, the reader's degrees, hostile SPLINE
  degrees and too few control points, the G4 cut-out exported and read back with its areas, and a
  degree-9 SPLINE with 2 to 10 points inserted into a sketch.

Fixes #5269

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:20:12 +00:00
Mateusz SychandMateuszSychXpl e33c371e99 Model cache: thin the checkpoints of a design too big for its file instead of leaving the cache out (#3220) (#4882)
* claim: #3220

* Model cache: keep fewer states of a design too big for its file instead of none (#3220)

A model cache over the container's budget keeps the final state, then the
slowest features' states while the bodies they add fit (a body several
states hold counts once), and is left out only when not even the final
state fits. Opening evaluates just the features whose state the file left
out, each from the state before it, so the model is whole afterwards.

* Model cache: keep each encoded body apart, copy only what a cache stores

Encoding a model too big for its file no longer copies every distinct body
into one buffer before thinning: the payload is copied from the encodings
once its size fits, so saving holds no more than before.

* Model cache tests: canonical runs in the timeline fixture; rustfmt

* Model cache: count the records a thinned cache keeps; always try the final state

Thinning counted only the bodies, so a model of many copies of one part
(records, not bodies, filling the room) shrank its budget to nothing and
saved no cache although its final state fitted. The choice now counts the
records of what it keeps, always keeps the final state, and says what it
counted, so each retry keeps less and the final state alone is always tried.

* docs: a thinned model cache counts its records and always tries the final state

* Model cache test: the slowest feature's state holds bodies 16 to 23

* Model cache: thinned opens with fingerprints that read the state before a feature

Since #3397 a feature's fingerprint reads where the bodies before it lie.
After a state the file left out, adopt takes the saved fingerprint and the
evaluation that works the state out checks it. A result evaluated ahead
is never taken as one the file left out. The thinned round trips include
the placed components' design, whose cut reads those placements.

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-10-23 13:44:11 +00:00
William Dunn 17f0d6bc68 Format registry: one table of formats, extensions and options (#5215) (#5217)
* Add the format registry: one table of formats, extensions and options in crates/io.

The hosts' Open-dialog filters and the web accept list derive from it, and
registry tests pin it to the path predicates and the command docs.

* Fix format-registry tests that compared FormatSpec without Eq.

assert_eq on Option<&FormatSpec> does not compile; the none cases
only need is_none, matching the other rows that compare ids.
2026-10-23 13:42:40 +00:00
Colin Faulkingham 3b982ca371 Prevent deleted item IDs from being reused (#1016) (#3641)
* claim: #1016

* Prevent deleted design item IDs from being reused
2026-10-22 18:31:39 +00:00
Jackson OurslandandClaude Opus 5.5 4dc1828138 Imported meshes: share their triangles between document copies (#4673) (#4675)
Every edit clones the document for undo, and `MeshData`'s positions and
triangles (plain `Vec`s) were copied with it: ~165 MB a command for a 2 M-
triangle STL. They are now `Arc<[f64]>` and `Arc<[u32]>`, shared by clones;
the few places that rewrite them build new arrays. Saved designs are
unchanged (an `Arc<[T]>` serializes as the array).

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-22 12:06:44 +00:00
5a9e771cc9 io: the 3MF and DXF budget tests do not check wall-clock time (#2998) (#2999)
* claim: #2998

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* io: the 3MF and DXF budget tests do not check wall-clock time

nested_fan_out_of_empty_objects_is_bounded spends about 20 million
visits reaching the work budget: 1.5 s alone, up to 40 s and more when
every test binary runs at once, past its 30 s limit. The time checks
run only after the reader returns, so a missing budget hangs these tests
with or without them; the error, the empty geometry and the three
vertices per placement are what show the budgets work. CONTRIBUTING.md:
a test must not depend on wall-clock timing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: kezmdor <15539254+kezmdor@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:58:39 +00:00
164554edba 3MF import: production extension review follow-ups (#2089) (#3628)
* claim: #2089 (3MF production extension: review follow-ups)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF import: production extension review follow-ups (#2089)

Follow-ups from the review of #2127:
- Only the root model's build is read; other parts' build sections are
  ignored as the spec asks (a slicer's child build pointing at a thumbnail
  no longer matters).
- A model part that can't be read fails only the placements that need it;
  the package-wide caps (part names, 1 GB of model XML) still refuse the
  package. The root XML is dropped once parsed and each part is read
  against the remaining budget.
- Loops are reported apart from depth, keyed by (part, object).
- Messages name parts as written; objects are kept in id order so parts are
  read in the same order every run; %XX escapes in part names are decoded;
  the model unit is a local of the parser.
- Tests: a component without p:path stays in its part (T1), the same id in
  two parts is no loop (T2), a slicer-shaped project (T3), the placement
  budget across parts (T4), a loop through three parts and a chain past the
  depth cap (T5), broken parts and child builds (T6), escaped names; the
  hostile-parts test asserts its messages; the mutation test also mutates
  the parts' XML and zips it again.
- Guide: what slicer-only data is not read.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:54:14 +00:00
Christian Svensson 38c710e72e Save designs with large STEP imports: compress the STEP part (#3221) (#3285)
* claim: #3221

* Save designs with large STEP imports: compress the STEP part (#3221)

A STEP between 256 and 512 MiB imported fine but could not be saved: a
design stored the STEP text uncompressed, and a design part is capped at
256 MiB. STEP sources are now always Deflated (level 2), may be as large
as an import accepts inside the file, and an import that could not be
saved even compressed is refused with a clear message. Reading stops at a
part's declared size, so a decompression bomb is refused early.
2026-10-21 00:54:05 +00:00
Luke JonesandCodex 26c0c19ef7 Preserve imported part names and IGES assembly structure (#1609)
Build on #1426's import components and nested STEP assembly instances.
Replace placeholder solid labels with meaningful part or instance names.
Translate IGES groups and subfigure instances through the existing STEP
component path, preserving nesting and placements and sewing surfaces
within each group. Bound assembly walks and reuse work buffers.

Related to:
- tangency-labs/solidcraft#1386
- tangency-labs/solidcraft#1426

Co-authored-by: Codex <noreply@openai.com>
2026-10-21 00:39:08 +00:00
bherbruckandClaude Opus 5.5 e98e065584 Open saved designs from the model they were saved with (#3053) (#3102)
* WIP: adopt the saved model on open (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* WIP: tests

* WIP: bench-open opens as Open does

* docs: opening from the saved model

* Tests: an edit after opening evaluates from the feature it changes

* clippy

* Read SOLIDCRAFT_NO_MODEL_CACHE through the env helper

* Open: no picture from the model when the model itself opens; cancel test evaluates

* Saved model: bodies passed through found without writing their record; states list runs of bodies

* Adopted results go into the evaluation cache: an undone edit, or the marker rolled forward, takes them again

* Model cache size guard: the saved model's writer

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:24:34 +00:00
Rifqi Al Fatihandbherbruck 46a0b25280 STEP import: CJK names read back whole (#2344) (#2347)
Adjacent \X2\...\X0\ runs, as step_out writes one per character, now
decode: the backslash opening the next run was pushed as a literal, so a
name exported as 圆角 came back as 圆\X2\89D2\X0\ (also every linked
component insert, which round-trips through STEP).

STEP and IGES bytes that are not UTF-8 are decoded in their detected
legacy encoding (chardetng + encoding_rs) instead of from_utf8_lossy, so
GBK or Shift_JIS names from vendor files no longer turn into U+FFFD.

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 02:32:50 +00:00
bherbruckandClaude Opus 5.5 d0afc31632 Save the evaluated model with every design: exact, stored once, scaled caps (#3053) (#3093)
* Model cache written by default: exact bodies, stored once, scaled caps (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* bench-open: say why bodies were not kept

* Exact planes and revolutions; budgets for large bodies (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Native B-rep: rebuild shells as the kernel made them (closed and seam edges) (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs: the model cache and the exact native B-rep (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* bench-open: time a save without the cache too

* Model cache entries are Deflate-compressed (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Model cache: one that does not fit the design file is left out, never a failed save (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 02:31:08 +00:00
NOWN-DEV b0b59480eb Joints: relations that tie part of a placement (#2497)
Joints can tie part of a placement: parallel, angle, point on plane and more (#2496).
2026-10-19 16:08:23 -04:00
4a4eb59788 3MF import: read objects in other model parts (production extension) (#2089) (#2127)
* claim: #2089

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF import: read objects in other model parts (production extension) (#2089)

Slicers save multi-part projects with the 3MF Production extension: the
root model's objects are components with `p:path` naming another model
part of the package, which holds the meshes. The reader skipped those
components and build items, so such files did not open at all.

Components and build items now keep the part they name, and the parts
objects name are read once each (looked up through an index of the zip
entries), with the number of part names and their total size capped.
Each part's unit is applied as it is read, so parts in different units
fit together. Cycle detection keys on (part, object), so parts that
place each other in a loop are refused.

Tests: components and build items in another part, part names in any
case, a part in centimetres under a root in millimetres, and hostile
packages (missing part, a path out of the package, an empty path, an
unknown object, a part that is no model, a loop between parts, more
part names than a package can hold). The 3MF mutation fuzz also runs
on a production-extension package.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF import: count every placement toward the budget (#2089)

An object that only places other objects added nothing to the triangle
budget, so a few objects each placing hundreds of components multiplied
at every level up to the depth cap (300 components, 3 levels: about 1 s;
deeper never finished). That was already true for one model part and now
reaches across parts. Every placement now costs at least one unit, so
such a file stops at the budget.

Test: six levels of 300 components over an empty object (300^6
placements) stop with a budget error in well under a second; without
the change the test does not finish.

Suggested in review by @jyviko.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 18:10:56 -04:00
Irakli Kourtis c4d2ae87ee deps: zip 3.0.0 → 9.0.4 (RUSTSEC-2026-0367, -0368, -0369) (#1971)
Thanks @jyviko.
2026-10-17 08:49:02 -04:00
CamWight 30ca43de7d io: every file reader survives deterministic mutation; glTF refuses a POSITION naming a missing accessor (#469) (#1923)
Thanks @CamWight.
2026-10-17 08:45:42 -04:00
franco michetti 78c6364b02 Saving to a network share on macOS: fall back to a plain fsync (#1741)
Thanks @onembyte.
2026-10-17 07:02:37 -04:00
NOWN-DEV 713111d9df STEP export: an inserted assembly's nested parts are placed once (#1895)
Thanks @NOWN-DEV.
2026-10-17 04:08:26 -04:00
bherbruck 2c020dbcbc Revert #1682 (three-axis milling) (#1715)
Thanks @bherbruck.
2026-10-16 09:02:19 -04:00
CypherNaugh_0x 737c9358d0 Add three-axis milling with independent CAM and Fusion validation (#1682)
Thanks @CypherNaught-0x.
2026-10-16 08:26:28 -04:00
Mateusz Sych 2ae21143ee Motion animation export: a study or a joint drive as an animated GIF (#1680)
Thanks @SychPL.
2026-10-16 07:26:15 -04:00