Commit Graph
35 Commits
Author SHA1 Message Date
SS-ENandClaude Opus 5.5 e67ae66f3e Renaming a parameter follows it into sheet-metal and plastic rules and canvases (#4420) (#4423)
* claim: #4420

* Renaming a parameter follows it into sheet-metal and plastic rules and canvases (#4420)

Document::rename_param rewrote other parameters, feature inputs, dimensions,
configurations and joints, but not the expressions of sheet metal and plastic rules or
the plane a canvas lies on, so after a rename the sheet metal and plastic features
using them failed with "unknown parameter" and the canvas left the view. It renames
them there now, and param_users lists them (a rule's field, a canvas's input), so a
parameter they use can't be deleted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Parameters: rules' features in drives and the graph; shared rule field lists (#4420)

A sheet metal or plastic rule that uses a parameter makes the sheet metal (or plastic)
features rebuild when it changes, so parameters.users lists them in drives and
parameters.graph links them. SheetRule::fields/fields_mut and PlasticRule::fields_mut
replace the hand-written copies of the rules' fields in params.rs, eval.rs and
sheet.manage_rules. Suggested by @CamWight.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fmt (#4420)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 07:35:31 +00:00
raykholo a0fd39a7be Flange on a plain solid says how to start sheet metal (#2987) (#4789)
* claim: #2987

* Flange on a plain solid says how to start sheet metal (#2987)

Flange, Flat Pattern, and Export DXF on a design with no sheet metal body
now say how to make one: Flange > Base, or Convert to Sheet Metal on a
plate's large flat face. An edge flange checks for a sheet metal body
before it adds a feature. The message is in the catalogs, and engine
messages that match a catalog entry are shown in the interface language.

* Dialogs show a refusal without the engine's parameter prefix (#2987)

The Flange dialog showed "invalid parameters for `sheet.flange`: " in front
of the new guidance. The dialog already names its command, so the red
refusal text leaves that prefix out and follows the interface language
when the message is in the catalogs. Create Issue still gets the full text.
2026-10-23 13:44:24 +00:00
raykholo ca9ebb44db Sheet metal: refuse a flat pattern that no longer matches the body (#3324) (#3325)
* claim: #3324

* Sheet metal: refuse a flat pattern that no longer matches the body

A feature that is not sheet metal can change a sheet body's material
without its sheet model knowing: a mirror combined into it, an extrude
joined onto it, a fillet or chamfer on a corner. The flat pattern, the
DXF and the bend table then wrote the sheet as it was before, a part
other than the one in the design, with no warning.

The evaluator now notes, per sheet, the first such feature: one that
changes the body's shape while its sheet model stays the same. That
feature warns, and sheet.flat_pattern, sheet.export_dxf (also with
per_body) and sheet.export_bend_table refuse with "not supported yet",
naming it. A sheet metal feature, or machining the sheet keeps as
cut-outs, rebuilds the body from the model: it clears the note and
warns that the change is not kept. Moving the body, splitting its faces
and cosmetic threads leave the flat pattern as it is.

* Sheet metal: a modelled thread is refused in the flat pattern too

Only a cosmetic thread leaves a sheet body's material as it is. A
modelled thread cuts the thread profile into the hole, which the flat
pattern does not have, and a later sheet metal feature dropped it
without a word. It now marks the sheet like a fillet does: it warns,
the flat pattern, DXF and bend table refuse naming it, and the feature
that rebuilds the body says the thread is not kept.
2026-10-20 12:07:24 +00:00
fe3b14e798 refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)
* Iterate instead of indexing in nine loops

Replace index loops that look up neighbours by position with enumerate,
zip(cycle().skip(1)) for wrap-around pairs and zip(skip(1)) for
consecutive pairs. No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: ring_edges for the edges of a closed ring

Every walk over a polygon's edges, the last back to the first, spelled
x.iter().zip(x.iter().cycle().skip(1)); eighteen of them now call
geom::ring_edges. Three redundant take(len) calls go with them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Ring, a closed ring that knows it is closed

A Ring holds items in order around a closed polygon, loop or fan; edges()
walks each with the next and the last with the first, corners() each
with both neighbours. Ring<Vec2> has signed_area and even-odd contains.

Loop2::polyline returns a Ring, as do doc's face_loops and
boundary_loops, kernel's coplanar wire samples, CapLoop's segments,
tess pieces' rings, the gizmo's plane quads and the navigation cube's
facets. Their walks take edges() or corners() instead of wrapping an
index; sketch's text-hole test and doc's poly_area become contains and
signed_area. Loop2::joints pairs each segment with the next.

Replaces the ring_edges free function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain, Ring and Path; bounds for a chain of points

Ring becomes Chain<T, Closed> beside Path = Chain<T, Open>: edges()
closes a ring and stops at a path's end, Path::close makes the ring,
and bounds() (the empty box for no points) serves both. Eight
hand-rolled min/max folds over a loop's polyline call bounds(); doc's
flat_polyline returns a Ring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area and inside on Ring for any planar point

Ring's signed_area and contains take any Planar point (Vec2 or
[f64; 2]). The cam profile in joints_cam is a Ring: its own even-odd
test goes, and its edge walks, gap and area take edges(). face_params'
loop area, the text path's winding, tess pieces' ring area and the
copies in three tests call signed_area or contains; the formulas are
the same term for term.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: sheet's closed outlines go through Ring

dedup takes and returns a Ring (dropping a last point back on the first
is what makes it a ring's), near_outline walks a Ring's edges, and the
copy of it beside fold checks calls it. point_in goes: its callers ask
the Ring. Its formula anchored each crossing on the other end of the
edge, so the two can differ only for a point on an edge to the last
digit; one caller sets such points aside first, the others test a
region's interior point, a cut's midpoint or another outline's corners.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: cam tests build their outlines with Ring::from

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area_vector on Ring<Vec3>; three Newell sums use it

Ring<Vec3>::area_vector is half the sum of a × b round the ring. heal's
loop_area, lip's outer-loop turning and the revolve's loop orientation
summed it by hand with a wrapped index; they take it from the Ring
(the half is exact, and two of them only read its sign).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3 from points; boxes built and asked through it

Aabb3 collects from points (skipping non-finite ones, as add does) and
gains inflated, contains and meets. Fifteen hand-rolled min/max folds
over points or boxes in kernel, doc and engine become collect or union,
and their "within tol of the box" tests become inflated(tol).contains.
blend's refused-edge boxes and naming's face index hold an Aabb3.

A NaN point is now outside every box, where the old negated
comparisons let it in; an infinite point no longer stretches a box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb2, the plane's box; 2D folds and box tuples use it

Aabb2 mirrors Aabb3 (collect, add, union, inflated, contains, meets)
and adds relative, a point's place in the box. sketch's link and
link_loops each had that formula; link_loops' boundaries, prism's
segment and loop boxes, profiles' shape boxes and grid, and ends'
segment box hold an Aabb2 instead of a (low, high) pair. Folds in the
cam, sketch bounds, sheet's perforation grid and the sketch clipboard
collect one.

Boxes are built from the same terms (a round's box keeps c - r - tol).
As with Aabb3, a NaN point is outside every box and an infinite point
no longer stretches one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel: prism's segment boxes are plain Aabb2s

The SegBox alias named a (low, high) pair; Aabb2 says it itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain::bounds is an Aabb2; the boxes #2382 left as pairs follow

Chain::bounds returns an Aabb2. Its callers keep it: sheet's hole and
cut boxes (loop_box), letter boxes, island outlines and line-near-cut
test use meets, contains and inflated; profile's outline overlap and
max_clearance, profiles' box tests and the cam test read its corners.
flat_size and the flat pattern's JSON size are the union of the loops'
boxes (0 × 0 for no loop, where the pair fold gave -∞).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3::intersection; hand-grown and hand-met boxes use the box

Aabb3::intersection is the box both hold. ops' four overlap boxes of a
boolean's operands take it, and seven boxes grown by hand (ops' body
boxes, the distance set's bounds, coplanar's face box, eval_more's
padded mesh box, compare's group and region boxes) call inflated with
the same amount on every side.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:44:49 +00:00
NOWN-DEV 473f1e6516 Sheet metal: readable face names from the sheet itself (#2275)
Sheet metal faces get readable names (#2272).
2026-10-19 16:08:01 -04:00
NOWN-DEV 09b3bd0e01 Sheet metal: machine a hole feature's drills in one pass, keep cuts after a text cut (#1979) (#1980)
Thanks @NOWN-DEV.
2026-10-17 08:52:19 -04:00
Nathan Dane 64966bab88 Implement the reviewed UI icon system and durable review workflow (#853)
Thanks @Nathan-Dane.
2026-10-17 04:07:16 -04:00
JIJINBEI 44968dbfe6 Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)
Thanks @jijinbei.
2026-10-16 00:28:12 -04:00
4cbf9cf607 Sheet metal: an Edge Flange can choose its own corner relief (#1481)
An Edge Flange feature can set the shape and size of the relief at the corners its flanges make, in place of the sheet metal rule's. Design format 24.

Co-authored-by: NOWN-DEV <NOWN-DEV@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-15 20:22:31 -04:00
NOWN-DEV d7a4a29ce3 Flat-pattern DXF for a laser shop: layers by role, dashed bend lines, bend notes, a file per body (#1324)
Closes #1284. sheet.export_dxf writes layers by role (OUTLINE, CUT, TEXT or ETCH, dashed BEND_UP/BEND_DOWN, optional BEND_NOTES, POCKET_<side>_Z…_MM and PERFORATION), inner contours before the outline; text: cut|etch, bend_notes and note_height, per_body files. Letters are derived from the timeline, nothing new is saved (format unchanged). I merged main in (the export's parameter list keeps main's pocket layer names). Checked on main + this branch: cargo check --workspace, the engine cmd::sheet tests (160) and the io DXF tests.
2026-10-15 06:34:06 -04:00
NOWN-DEV d824d36821 Convert to Sheet Metal takes bent parts as modelled: radius and chamfer bends, holes (#1314)
A Convert to Sheet Metal bend point can now lie on a bend modelled with its radius (a cylinder tangent to two flat faces) or in the middle of a chamfer; either becomes one bend at the faces' virtual sharp, with the rule's radius. Holes and engravings carry over. Bend points on edges convert as before. Recorded under format 21. Tests in cmd::sheet::convert_tests; the sheet-metal guide is updated.
2026-10-15 02:54:09 -04:00
NOWN-DEV 5c6f70cc00 Faces by name in the face commands; model.faces gives a point on each face (#1243) 2026-10-14 20:18:13 -04:00
NOWN-DEV 764fcaa5a8 Sheet metal: the flat-pattern DXF writes ellipses and splines exactly (#1096)
sheet.export_dxf writes an AutoCAD 2000 drawing with ELLIPSE and SPLINE entities for ellipses, splines and text outlines instead of chords, with curves: arcs for machines that read only lines and arcs. Perforation circles go through the same writer. Closes #1089.
2026-10-14 14:09:46 -04:00
Jonas Wrede 54a8c807bf Sheet metal: sheet.perforate, a perforation field exported to the flat pattern and DXF (#732) (#1041)
Adds sheet.perforate: round holes on a staggered or square grid over the flat sheet, kept clear of edges, cut-outs and bend zones. The holes go to the flat pattern, the DXF and the measured volume rather than the B-rep, so a panel can carry many thousands of them.
2026-10-14 12:43:31 -04:00
bherbruckandClaude Opus 5.5 6cb3025b72 Sheet metal: a hole drilled into a rim is a bore its panel keeps (#560) (#955)
A hole drilled along a panel, into its rim, has no place in the flat pattern
as a cut-out, so every such hole was refused. It is now kept as a bore of that
panel, in flat coordinates, and cut only from that panel's material when the
folded part and its flat pattern are built, so the sheet still unfolds and
folds back with it. A hole that would run into a bend, or cross a panel at an
angle, is still refused. The flat pattern lists the bores.

The action matrix worker takes ACTION_MATRIX_ONLY (just these actions) and
ACTION_MATRIX_UNFOLD (unfold and refold every sheet after each action) for
rechecking one group by hand.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 02:31:19 -04:00
NOWN-DEVandClaude Opus 5.5 dd084ec9e1 Sheet metal: tear as a fourth corner relief shape (#809)
A sheet metal rule's corner relief shape can now be tear; saved under format 17 with a note.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 14:28:28 -04:00
NOWN-DEVandClaude Opus 5.5 a1cb8d4d36 feat: Convert to Sheet Metal takes a solid or a shelled body by its bend edges (#725)
Convert to Sheet Metal now takes a solid or a shelled body by its bend edges (`bends`): the faces reached from the fixed face across those edges become the sheet, keeping the part's envelope, with the flat pattern by the rule's K-factor and radius. Other edges between sheet faces are cut open. The result works with edge flanges, cuts, Unfold/Refold, the flat pattern and DXF. A conversion without `bends` is the plate conversion as before. The optional `bends` field is noted under format 17. Fixes #647.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 10:52:28 -04:00
NOWN-DEV 9089edfb71 fix: the bend table and bend lines follow what cut-outs leave of a bend (#607)
The bend table, flat pattern and DXF list a bend only where its centre line has material: a bend that cut-outs (or pockets that together go through the sheet) shorten keeps what is left, and one they split gets a row per piece, all with the bend's number.

Co-authored-by: NOWN-DEV <257771410+NOWN-DEV@users.noreply.github.com>
2026-10-13 04:32:45 -04:00
Jonas Wrede 9c94e1b96d fix(sheet): flat pattern reports cut-outs exactly as circles, lines and arcs (#542) (#552)
sheet.flat_pattern reports every cut-out exactly in a new cutout_shapes list, parallel to cutouts: a round hole as a circle, other cut-outs as their lines, arcs and (for other curves) polylines. Pockets get the same. The DXF writer and the JSON share one circle test. Un-ignores the #542 regression test. Fixes #542.

Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
2026-10-13 04:18:37 -04:00
Jonas Wrede db02a18627 fix(sheet): sheet.flange refuses rule values instead of ignoring them (#570) (#594)
sheet.flange refuses the sheet values its rule owns (thickness, K-factor, bend radius, reliefs, hem gap) instead of silently ignoring them, and says to use a rule. Un-ignores the #570 regression test. Fixes #570.

Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
2026-10-13 04:06:59 -04:00
Jonas Wrede c727e2d0c2 fix(sheet): keep a stored fold working when its fixed point drifts off the sheet (#370) (#537)
A stored fold whose fixed point drifts off the sheet after a parameter change keeps the side the point lies on and shows a warning instead of breaking the timeline. A new fold still refuses a fixed point off the sheet, atomically. Un-ignores the #370 regression test. Fixes #370.

Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
2026-10-13 04:05:01 -04:00
NOWN-DEVandClaude Opus 5.5 d6af554c6d feat: corner reliefs at sheet flange corners, chosen by the rule (#488)
Sheet Metal Rules get a Corner Relief Shape (notch, round or rectangular), sized by the rule's corner relief, cut where two bends meet at a corner of the base. Notch, the default, keeps existing designs as they were. File format 16.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 00:25:50 -04:00
NOWN-DEVandClaude Opus 5.5 fb4c1d74b9 feat: edge flanges with their own angle and height per edge (#447)
One edge flange feature gave all its flanges one height and one angle. A
part whose flanges lean differently took one feature per angle, and
flanges of separate features don't close toward each other, so its
corners stayed open.

- sheet.flange (edge): an entry of `edges` is a point [x, y, z] as before,
  or {point, angle?, height?} whose angle and height (expressions, checked
  like the feature's) replace the feature's for that edge. Bad input is
  refused with the edge named. Before, the object form was read for its
  point and the rest was ignored without a word.
- The feature stores its edges as FlangeEdge. An edge without values of
  its own is written as the plain point it always was, so designs without
  them are read and written as before; an unknown key in an edge is
  refused, not dropped.
- The edges' values are feature inputs of their own (Edge angle, Edge
  height, after the feature's), so parameters, renames and
  parameters.change reach them. timeline.edit names the edges again when
  it changes them, so each value stays with its edge.
- SheetBody::add_flanges_each trims every edge by its own setback and
  adds the flanges. The corners between them close as between equal
  flanges: the closing already works from the two flanges it joins (each
  one's fold and leg), so the flat pattern follows by hand from the
  angles, the heights and the rule (the tests derive it).
- The Flange dialog shows a row per picked edge with an angle and a
  height box (empty: the dialog's value) once more than one edge is
  picked, and brings them back on Edit Feature.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 20:33:49 -04:00
NOWN-DEVandClaude Opus 5.5 0154572580 feat: close sheet flange corners at any angle (#406)
Edge flanges meeting at a corner of the base were closed only at exactly
90°; at any other angle they stayed open (a V at 72°) and the rule's gap
was not used.

The flanges of one feature now close at any convex base corner and any
bend angle: each panel end is cut square to the sheet on a line in the
flat (slanted off 90°, stored as ext plus a new per-end slope) so the
edges nearest each other, on the inner faces, run parallel the rule's gap
apart about the plane bisecting the inner faces. The construction reads
the two flanges' own angles, so it holds for unequal ones as well. At 90°
it is the extension the old code gave (reference case 69-sm-tray is
unchanged). A corner that can't close (a gap under 0.01 mm, flanges
bending opposite ways, ends that would overlap in the flat pattern) stays
open, and the flange feature reports a warning that says where and why.

A flange of a later feature leaves the corner as it was (reference case
75-sm-bracket-holes: the earlier flange keeps its length).

Tested at 72° and 90° against a hand derivation, on a trapezoid, and
every 5° from 45° to 135° on a rectangle and a trapezoid (gap exact, one
flat region without hairline edges, one valid shell holding the flat
material).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 18:48:19 -04:00
bherbruckandClaude Opus 5.5 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
Iraklis KourtisandClaude Opus 5.5 fe4d171e22 feat(sketch): live drag that keeps its solution, ended by sketch.drag_end (#341)
* feat(sketch): constructive solving ahead of the numeric solver

Part 1 of splitting #251: the sketch crate only. A graph-constructive front
end (Owen 1991; Fudos & Hoffmann 1997) places what it can by ruler-and-compass
loci and cluster decomposition, Levenberg-Marquardt finishes and verifies the
rest, and the rank analysis stays authoritative for degrees of freedom. Solves
can follow a reference (the previous solution), so edits and drags keep their
branch instead of flipping.

New API: solve_with (hold, reference, analysis, budget) and
solve_after_value_edit; solve and solve_holding keep their signatures as
wrappers, so no caller changes here.

When the seed moves an arc's centre, the arc's unconstructed ends start carried
along (the arc translates) instead of left behind for LM to turn; found by the
reference test 20-slot-constrained.

Refs #203

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44

* feat(doc): keep a sketch's solved state across value edits

Part 2 of splitting #251 (builds on part 1, the sketch crate):
- Sketch edits solve for the document's values continuing from the stored
  solved state (Document::solve_sketch), so a dimension edit keeps the
  sketch's branch instead of re-solving from scratch.
- A value edit (parameters, a configuration, the units) that would make a
  sketch that solved before fail or turn over is refused with the
  conflicting constraints named; otherwise the solved sketches are written
  back into the document (Model::adopt_solved_sketches), which changes what
  saved designs store.
- Later features are keyed by a sketch's solved geometry (to a 1e-6 mm
  quantum), so setting a value back reuses their earlier results.
- Solved sketches in a model state are shared (Arc) between states.

Refs #203

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44

* feat(sketch): live drag that keeps its solution, ended by sketch.drag_end

Part 3 of splitting #251 (builds on part 2):
- sketch.drag follows a long move in short held steps, so the geometry keeps
  its branch, and reports how far it got (reached, at).
- live: true runs one frame of an interactive drag: the sketch is solved
  once and shown, later features keep their last result (marked stale)
  until sketch.drag_end or any command that reads the model evaluates it
  (CommandSpec::live, reads_model, doc_only).
- sketch.drag_end adds the constraint the drag let go on and evaluates the
  model once.
- Undo and redo evaluate a new document once (execute does) instead of
  twice.
- The viewport drives drags through live frames and drag_end; dimension
  text drags start only off sketch geometry.

Refs #203

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 13:45:48 -04:00
bherbruckandClaude Opus 5.5 87bb2f37f8 fix(#271): document name?, body_name? and targets? on the commands that accept them
sheet.flange now lists name?/body_name?, solid.loft and solid.sweep list
targets?/name?/body_name?, and the primitives list name?/body_name? (all go
through add_feature, which reads them). A test pins the shared keys for
every body-creating feature.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-12 10:07:10 -04:00
bherbruck c1d819f235 feat: preserve body history and placed modelling workflows
Record ownership transfers in the timeline so earlier Join/Cut membership,
world placement, machining data and styles survive component moves, edits,
independent copying, undo and reopening. Preserve pending positions in history
snapshots and keep constructor transfers ordered during feature redefinition.

Retain shallow sheet pockets and exact planar intersection islands through
unfold/refold, with depth-aware flat previews and DXF export. Store explicit
3D wire coordinate spaces and migrate known legacy provenance without moving
saved points or analytic fits.

Infer unique eligible cylindrical Emboss targets, align Revolve manipulators
with actual extent geometry, and discard obsolete preview errors after input
correction. Certify constructed and immutable imported face styles using exact
source metadata while preserving legacy face names. Upgrade designs to format10
with bounded validation and geometry-preserving legacy migration.
2026-10-11 03:59:12 -04:00
bherbruck 07932d0f42 feat: preserve modeling intent across sketches, assemblies, and fabrication
Persist typed sketch dimensions and bounded ordered configuration rules in format 8. Use exact occurrence paths and source identity for editing, movement, appearance, and mass. Preserve sheet material regions through cutting, folding, and exact DXF export; retain nested cavities and material islands.

Validation: cargo xtask ci passed, including 368 engine tests, 178 UI tests, 68 UI scenarios, 136 kernel tests, and the 10-crate wasm check. Actual preview workflows and legacy format-7 origin-corner reopening were inspected.
2026-10-11 01:28:01 -04:00
bherbruck d71bdb78ec feat: strengthen modeling, configuration, and assembly workflows
Preserve linked sketch identities through deterministic face projection and resizing. Fix origin-corner picking, persistent inline navigation, appearance editing, configuration styles, component properties, contact sweeps, sheet exports, analytic STEP offsets, and bounded rolling-ball fit accuracy.

Validated with full cargo xtask ci, native workflow screenshots, repeated enclosure replays, and analytic geometry regressions.
2026-10-11 00:37:26 -04:00
bherbruckandClaude Opus 5.5 d10312b7fd Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-09 12:17:23 +00:00
bherbruckandClaude Opus 5.5 c9ed3d154d Web files: designs live in the browser (OPFS), files come in by picker or drop and go out as downloads
- solvecraft_io::vfs: the engine's file access (disk natively; in the browser an in-memory set of
  files the host loads and stores). File commands and write_atomic go through it.
- Web host (apps/solvecraft-web/src/files.rs): stored designs are read from OPFS at start
  (storage.persist() asked for) and written back when a command writes one; Save/Save As keep
  designs in the browser, exports (STEP, STL, 3MF, OBJ, ...) download as files.
- File > Open shows "Files in this browser": open, insert, rename, download, delete, plus open or
  insert from the computer (showOpenFilePicker where there is one, an <input type=file>
  otherwise). Files dropped on the page are inserted or opened.
- Unsaved work is autosaved to OPFS and offered again after a reload or crash.
- Start page recents come from the stored designs, with thumbnails. In the browser the samples
  are built when opened (a picture blocks the page there, and a kernel panic can't be caught).
- Pages without OPFS (http on a network address, old browsers) keep designs in local storage.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 21:15:18 +00:00
bherbruckandClaude Opus 5.5 9f8915996d Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruckandClaude Opus 5.5 66fa6fe584 Dialogs for joints, sheet metal and plastic
ASSEMBLE panel (SOLID, SHEET METAL, PLASTIC): New Component, Joint, As-built Joint, Joint Origin,
Rigid Group, Drive Joints, Motion Link, Interference. Joint origins are picked by hovering:
faces snap to their centre (round faces to the centre of the nearer end), edges to their middle
(round edges to their centre), vertices to themselves, shown as glyphs with their z axis. The
Joint dialog has the motion type, angle, offsets X/Y/Z, flip, per-value limits and Animate (the
preview plays the motion); joints and drives preview on the placed model (world states).
Drive Joints moves live with a slider. Interference lists the overlaps and shows them red.
Joints appear in the timeline and in a Browser Joints folder (edit, drive, suppress, delete).

SHEET METAL tab in Fusion's layout: Flange (base, edge or contour, from the picks; height arrow
on the canvas), Hem, Unfold, Refold, Convert to Sheet Metal, Sheet Metal Rules (rule manager),
Create Flat Pattern (flat view with up/down bend lines, bend table, DXF export).

PLASTIC tab with SETUP: Boss, Lip/Groove, Snap Fit, Rest, Manage and Assign Plastic Rules; Rib,
Web and the shared solid commands on the tab.

Every feature dialog has live preview, Edit Feature and pre-selection; icons drawn in code.
Toolbar layout per tab in workspace.rs; tests for the dialog to command mapping.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 07:29:26 +00:00
bherbruckandClaude Opus 5.5 e5560e8035 Sheet metal: rules as expressions (Thickness, K-factor, bend radius, reliefs, gaps; may use parameters), sheet bodies kept as flat patterns and sewn folded from exact faces (new kernel::sew), Flange (base, edge with height to the outer face, angle, inside/outside/middle, several edges at once with corners closed to the rule gap, contour from an open chain), Hem, Unfold/Refold with cut-outs that follow the bends, Convert to Sheet Metal, flat pattern with bend lines and bend table, DXF export; recipes: sm_flange, sm_hem, unfold/refold, rule edits (oracle 67-76 all pass)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 04:11:35 +00:00