A new crate (L1, only the kernel uses it) builds tangency-labs/smlib's SMLib,
SM_API and C API with the cc crate when its `native` feature is on, from the
commit in crates/smlib/SMLIB_REV (scripts/fetch-smlib.sh fetches just those
sources). The kernel's `smlib` feature turns it on. Without it nothing C++
is built and every call returns NotBuilt, so workspace builds need no C++
toolchain.
unsafe is confined to src/ffi.rs. The wrapper owns handles, maps statuses to
errors, checks the C API version, and sends SMLib's per-call log to the log
crate. Crash reports note the native kernel call in flight.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The adapter now saves each edge's curve record and interval when the edge first appears and
computes every face's pcurves from those records and the surface record it writes, with the
shared plain-record routine; the truck-face version in native/pcurve.rs is deleted. Loops go
in as the record keeps them (relative to the surface), so a reversed face no longer has its
wires reversed and back again.
The native tests are ported (adapter::face_alone gives one face's record for them). The cut
body's intersection pcurves now fit at 1e-6 mm too: the routine follows the converged
intersection, and truck's own points are within its 1e-6 mm of it, which the lift check
allows for on intersection edges. docs/native-brep.md says where pcurves come from and what
a surface intersection's point at t is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
The parameter box, the projection of a point onto an evaluator surface (closed form on a
plane, damped Gauss-Newton elsewhere), unwrapping and the pole test work on geom's
EvalSurface alone. They move from the kernel's tessellator to solidcraft_geom::tess::uv so a
pcurve routine on plain B-rep records can use them without truck; the kernel re-exports them
and its tessellation is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
docs/native-brep.md describes schema 4: the records with their SMLib and
STEP names, regions and shells, the loop convention, every edge's uses,
the canonical order (a reversed face walked backwards), each curve and
surface kind's parameterisation, pcurve rules, validation, history, the
SCBREP05 envelope and what the truck adapter writes and refuses.
A test lifts every pcurve of a box, a filleted box with a bore and a
sphere onto its face and checks it is its own edge at both ends and the
middle; with a reversed face's pcurves left in truck's oriented order it
fails by 30 mm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Edges, vertices and the body carry the face tolerance (10^-6 of the
body's size, at least 10^-5 mm): truck's traced intersection edges sit
about 1e-6 mm off their surfaces, so the linear tolerance is too tight for
a pcurve to lift onto them. The box-and-fillet golden fixture is the
schema 4 envelope now (NATIVE_BREP_BLESS=1 rewrites it), and the adapter
tests cover a pair of lumps. The model cache's producer revision becomes
solidcraft-truck-adapter/4.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
The plain B-rep follows SMLib's flat form with STEP's names: regions
(infinite first), face/wire/vertex shells, oriented faces, faces with a
domain and edge or vertex loops, oriented edges with a pcurve each, edges
with an interval, a tolerance and their list of uses, vertices with a
tolerance. Curves and surfaces are unbounded; their bounds are the edge
interval and the face domain. Loops are relative to the surface's natural
normal. Schema 3's read-only intersection and revolution records go.
The validator keeps schema 3's caps and adds the structural rules:
references, loop shape and connectivity, regions and closed shells, the
pcurve interval, natural parameter ranges, every edge's uses (primary
first, upper = !forward) and the canonical order of shells, faces, edges
and vertices. A reversed face is walked backwards, as truck's edge_iter
walks it, so truck's face and edge indices are the canonical ones.
The truck adapter writes truck's absolute wires as the loops, numbers
everything as the kernel does, and builds regions from the shells (a
tessellated nesting test only when there are several closed shells).
Pcurves come from pcurve::pcurves only; until it supports a face, encode
fails and the body is a cache miss. The envelope signature becomes
SCBREP05.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
FaceOrigin, Change, FaceProv, Side, EdgeOrigin, EdgeProv and History move
unchanged (fields, serde derives) to solidcraft-geom, so a backend can
report history without depending on solidcraft-kernel. The pure methods
(composition, renumbering, count checks, mark_shared_split) move with
them and return brep::history::Failed, which converts to
KernelError::Failed with the same "history: …" message.
What needs a kernel body (History::identity, check, face_sources) stays
in the kernel as the BodyHistory trait; solidcraft_kernel::history
re-exports the types, so existing paths keep working.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
A band of a cylinder bounded by two full circles and no seam cannot close
in (u, v): each loop's pcurve runs one period. The test records that such
loops come back continuous and a period open (the caller needs a seam
there), and that a hostile tolerance is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Each sample of an intersection curve is one of truck's double projections
(about 0.13 ms in a release build), and a fit evaluates the curve at every
sample and halfway between. Starting from four samples a span instead of
eight halves that; the checks stay at eight points a span, and the knots
at the curve's own breaks already carry the shape. The cylinder cut by a
tilted box now takes 70 ms at 1e-3 mm and 149 ms at 1e-5 mm for all its
faces (release), from 183 and 638 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Faces with seams as imported faces have them (the kernel's own
revolutions come in pieces): a cylinder whose seam line is used twice
between two full circles, each a closed edge on one vertex, and a sphere
bounded by one meridian used twice from pole to pole. Their seam uses come
out a period apart, in the base period. The checks now also require every
face's outer loop to turn counter-clockwise in (u, v) for a face along its
surface's normal and clockwise against it, holes the other way: the rule
the pole junctions rely on, which every test body follows.
With SOLIDCRAFT_PCURVE_SVG=<dir>, a test writes each test body's face
loops in (u, v) as SVG for review.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Every edge not exact on a plane gets a cubic 2D B-spline on its curve's own
parameter: through the parameters of the curve's ends, least squares
through samples between (banded normal equations), with spans halved and
sampled twice as densely wherever the lift misses the curve by more than
half the tolerance, at the samples or halfway between them. Knots start
where the curve's parameterisation is less smooth: a spline's own knots
and the vertices of an intersection curve's leader polyline, with the
multiplicity a cubic needs there (without them the cylinder-minus-box
intersection curves took 400 spans at 1e-3 mm). Spans and rounds are
capped; a fit that does not converge, or a curve farther from the surface
than the tolerance allows, fails naming the wire, edge and distance.
Samples are projected with the kernel's own surface parameter search (the
evaluator's form, parameterised as truck parameterises it; truck's search
for surfaces it does not take), each from the one before, unwrapped along
periodic directions. Where the surface collapses (a pole) the undefined
parameter comes from the nearest sample that defines it, so a pcurve runs
straight into the pole. Each wire's uses are then moved by whole periods so
each starts where the one before it ends, starting after a pole junction
if there is one; at further pole junctions the offset that gives the loop
a boundary's turn is taken. The wire then moves into the base period. A
seam edge used twice is fitted once.
Truck places intersection curves on their surfaces to about 1e-6 mm, so
their pcurves need a tolerance of 1e-5 mm or more; the test records that.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
A plane's parameters are affine in space, so the pcurve of a line or a
(rational) B-spline on a plane is the curve's own knots and weights with
its control points mapped into (u, v): no fit. Curved surfaces and
intersection curves still return "not supported yet". A test helper checks
every pcurve the way the schema validator does, its interval against the
curve's range, the lift error and the wire's closure in (u, v); the box's
line pcurves lift onto their lines' ends bit for bit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
The shared base for the schema 4 types and the truck pcurves: 2D B-spline
pcurves as SMLib keeps its UV trim curves, and the truck adapter's pcurve
function, not supported yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
* claim: #6226
* Offset Face: split a face off its seam and try again, as booleans do (#6226)
A hole's wall arrives from a STEP file as one whole turn bounded by one wire that
runs along its seam twice, where SolidCraft builds the same wall as two halves.
Offset Face heals the body before it moves anything, and healing such a face
fails inside truck with `This wire is not simple`, so the panic guard turned the
whole operation into a kernel internal error. Since importing is how a part with
a hole usually arrives, Offset Face did not work on imported parts with holes at
all.
`seam_faces` already answers this for booleans: split every such face in two
along a plane through its axis, run the operation, and compose the history back
over the body as it was given. This gives the offset path the same retry.
- `seam_faces::one_body` is `boolean`'s answer for an operation that takes one
body, with `needed_one` beside `needed`.
- `offset_faces` now does its healing, its face picking and its offset inside one
closure, so the retry runs the whole of it on the split body; the first attempt
is guarded, so the failure is an error the retry can act on rather than an
unwind. The faces are picked per body, because the pieces are numbered
differently once a face is split — the points do not move, so they pick the
same surface either way.
The regression test is in `seam_faces_tests.rs`, beside the boolean ones: a
20 x 20 x 10 block with a 6 mm hole, read back from STEP, whose top moves 2 mm
and lands on the same volume as moving the built body's top, with its history
intact.
Checked against `main` before and after: the three kernel tests that fail here
(`blend::…seam_twice`, `step_in::…parallel_body_preparation`,
`tests::a_box_cut_round_a_small_hole…`) fail the same way without this change.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: CarlosKeese <dudukeese@gmail.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* claim: #4031
* Triangulation: split a crossing boundary segment ourselves, never in spade's assert (#4031)
A trimmed face's boundary segment that crosses a constraint already in the
triangulation went to spade's add_constraint_and_split, which asserts
(cdt.rs:978, `!previous_region.is_empty() || from == final_vertex`) when a
split lands so near another vertex or constraint that the piece up to it is
blocked. The kernel guard caught it, but the whole operation failed and a
crash report was written; a STEP body imported empty or not at all (#4598,
also #4293, #4478, #5068, #5229).
PolyBoundary::add_constraints now adds every segment that can be added, then
splits each blocked one itself: a vertex at each crossing, inserted from the
crossed edge's own vertex, and the pieces between added where they can be. A
segment with crowded or very many crossings, or a face with more than four
blocked segments (a rim that runs back and forth across itself), leaves them
out, as truck did before #1653, so the face meshes slightly off instead of
not at all. Pinched faces (#1648) still split where they cross.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A join failed with the kernel's internal error "tolerance must be no less
than 1e-6" at vendor/truck-geometry/src/decorators/intersection_curve.rs:172:
IntersectionCurve::parameter_division asserted truck's minimum tolerance,
and the guard turned the panic into a failed operation. A tolerance below
truck's TOLERANCE, or one that is not a number, now divides at TOLERANCE:
the curve's points are only found to within it anyway.
The test divides the intersection edges of a hole cut through a B-spline
face at 5e-7, 1e-12, 0, -1 and NaN: each gives the division at 1e-6. Without
the fix it panics with the reported message at the reported line.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5150
* Stand it up: don't offer it for SolidCraft's own STEP files (#5150)
STEP replies from file.insert_step and doc.open now carry the file's
originating system, and the window skips the stand-up offer when it is
exactly SolidCraft, as SolidCraft's STEP export writes it.
* Stand up Y-up STEP and IGES files from SolidWorks automatically
The STEP header (originating system, preprocessor version, FILE_DESCRIPTION) and the IGES
global section's native system ID say which program wrote a file. A SolidWorks header means
Y up: the import's component is stood up as it opens, as one undo step, and the message offers
Undo. SolidCraft's own files are left alone; an unknown exporter keeps the offer.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Ray <raykholo@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
`Body::size` walked a mesh body's vertices on every call, and it is asked
for every frame. A mesh body's triangles never change after `mesh_body` or
`mesh_transformed` makes it, so both now measure it then (`TriMesh::span`)
and `size` returns it like a B-rep body's. `ModelBody::mesh` returns a mesh
it already has before working out the display tolerance.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Chamfer: a cutter that would reach into a nearby wall is not used
A straight chamfer's cutter reaches several times the chamfer's size out
from its edge, and further on a larger part. On a pin standing in a socket,
that far side lands inside the socket's walls, and the cut took bites out
of them. A cutter whose far side is inside the part is now refused, as one
whose ends are, and the chamfer is built locally instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Robustness goldens: seed 9 re-recorded for the chamfer cutter check
A chamfer in seed 9 was refused because its result changed more of the
part than a chamfer can. With its cutter refused, it now builds locally.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: mesh band faces that wrap around a closed surface correctly
Fixes two related bugs that caused SolidCraft to fail to mesh a face wrapping
all the way around a closed, non-periodic surface (a revolved ridge band, or a
tube-shaped B-spline surface): a missing face, a folded/self-overlapping
triangulation, or a hole in the rendered body.
1. Ring edges that run slightly off their surface. STEP files write a surface
and the curves bounding it to the file's own declared uncertainty, so a
ring edge can legitimately sit a few micrometres off the surface it
bounds. The code finding where a ring edge crosses the planned split line
compared against the edge's raw (off-surface) point using a hardcoded
tolerance far stricter than the file's own precision, rejecting a valid
cut. Now matches against the point on the surface directly below the ring
crossing, respecting the file's declared tolerance.
2. Closed B-spline surfaces, their slits and their slivers. truck only treats
the rotation of a revolved surface as periodic; a face on a B-spline
surface whose control net closes on itself (a tube) wasn't recognized as
wrapping around at all. This produced a folded face, a hole (a boundary
loop landing a full period away from where it should cut), and one
near-zero-width sliver face costing the entire body its tessellation
plan. Adds periodicity detection for closed B-spline surfaces, period-
aware hole-loop alignment, dropping of zero-width slit boundaries, and
isolating a too-thin-to-triangulate face so it no longer takes the rest
of the body down with it. The GPU shader's periodic wrap mirrors the CPU
math so the two don't drift apart.
Regression tests: band_faces_split_when_ring_edges_run_off_their_surface,
band_face_with_a_zero_width_slit_is_still_meshed,
a_sliver_face_too_thin_to_triangulate_does_not_cost_the_body_its_plan.
Ablation-tested: disabling either mechanism in (2) reproduces its target
test's original failure message while leaving the other test unaffected.
* STEP import: mesh the band's split faces, not just split them
jyviko asked whether a band wall missing from the interactive app's render
was a shading issue or a genuinely missing face. It was missing: the ring-
edge split fix made the band's topology correct, but plan_face still
produced zero triangles for the two new sub-faces.
Two causes, both in plan_face (crates/kernel/src/tess/mod.rs):
1. The tolerance for how far an imported boundary may lie off its surface
was tied to the requested mesh's chord tolerance instead of to the
body's own size. A finer display tolerance could then reject a boundary
a coarser one had just accepted, so the face would drop out exactly when
zooming in on it.
2. Near a sharp corner of this flat-panelled band, several boundary points
that are legitimately a few micrometres apart (within the STEP file's
own declared precision) all projected onto the same surface point. The
boundary loop then repeated a point in (u, v), which a triangulator
can't follow, so the face's plan failed outright. One face without a
plan costs the whole body its plan, and the fallback mesher can't
handle a closed B-spline surface either, leaving both halves of the
split band with no triangles at all: present in the topology, invisible
in every renderer, and absent from the body's volume.
Fix: scale the off-surface tolerance to the body's own extent (new
Rules::extent), and collapse a run of boundary nodes that land on the same
surface point to one (drop_collapsed) before triangulating.
Regression test additions to band_faces_split_when_ring_edges_run_off_their_surface:
the body's volume now matches the analytic pentagon prism (was a third of
it - only the top cap - before this fix); display_plan leaves no face
without triangles from coarse to fine tolerance; and the actual tolerance
and facet angle the viewport draws with gives the split band its full
lateral area on both halves.
Confirmed on review_band_big.step, the fixture behind the review screenshots:
volume's relative error against the analytic pentagon prism drops from
1.4e-4 to 4.1e-6, and the band wall now occludes the floor grid behind it
in a snapshot the same way the top and bottom caps always did.
Full kernel suite: 739 tests, 0 failed.
* STEP import: hold an imported boundary to the file's own tolerance, not the part's size
jyviko: the off-surface acceptance added in the last commit
(rules.extent * OFF_SURFACE) scaled with the part, so a 2 m part
silently accepted a boundary 2 mm off its surface while a 20 mm copy
of the same part accepted only 0.02 mm. A STEP file's own declared
uncertainty does not grow with the part, so the bound shouldn't either.
Body gains boundary_tol: Option<f64>, Some(file's declared tolerance)
for a body read from STEP (crate::step_in::Units::tol, already used
by the ring-split fix in split.rs), None for anything this kernel
built. It's set before the import's own unmeshed-face check runs, and
carried over by the two face-split operations that re-cut an imported
surface (splitface.rs, outline.rs), since the file's uncertainty still
describes those boundaries afterward.
plan_face's accept now reads: the file's own tolerance when the body
declares one, or the old chord-tolerance/extent bound otherwise. The
old bound's tol * 10.0 term had to go too, not just the extent term:
at a 2 m part's typical display tolerance that term alone is ~20 mm,
nearly ten times the extent bound jyviko objected to, so keeping it
would have left the exact 2 m/2 mm example still silently accepted.
Two new tests in step_in/tests.rs:
- band_faces_split_when_a_scaled_copy_runs_off_its_surface: the same
band fixture at a realistic 2 m scale with the same absolute slop
and declared uncertainty as the small one, meshes the same way at
every chord tolerance from coarse to fine.
- off_surface_budget_follows_the_file_not_the_part_size: the actual
regression. The same off-surface error is accepted or refused the
same way whether the part is 20 mm or 2 m; a 2 mm error against a
1 µm declared uncertainty is refused at both sizes now (accepted at
2 m under the old bound, refused at 20 mm - that asymmetry was the
bug). Checked at both a coarse and a fine display tolerance.
Known gap, not fixed here: a STEP-imported body saved into a
.solidcraft design and reopened loses boundary_tol (native.rs's
decoder has no field to read it from) and falls back to the old
extent-based bound on reload. Today's design format has no concept of
this value at all; persisting it is a real format change, out of
scope for this fix.
Full kernel suite: 776 tests, 0 failed. clippy -D warnings clean.
* Display plans for STEP threads and pointed ends (#3847)
Three faces cost a threaded or pointed STEP part its whole display plan, so it
was drawn from the reference mesh: cracked, faceted, and never refined up close.
- A loop through a pole (a cone's apex on the boundary) seemed to wind around
the surface: the jump at the apex, unwrapped to the nearest copy, was
arbitrary. The loop is turned to end where it leaves the pole, so the step
that closes it is an ordinary one (`seam::close_through_pole`).
- Projection onto a spline with hundreds of spans (a helical flank) restarted
from a 16 x 16 grid and settled on another turn; it now starts from two
points per span, capped.
- Sag refinement no longer inserts a point exactly on a boundary side, which
split the side and failed the face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* tess: a refused face's edges are divided finer and it is planned again (#2814)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* tess: sliver faces plan empty; a face no method plans is filled flat from its nodes (#2814)
A face whose boundary runs out and back along itself (two edges between the
same vertices, a rounding apart, as STEP files write slivers) encloses nothing
and is planned with no triangles. A face still refused after its edges are
divided finer (a cusp, a sliver whose sides sag across each other, a small cap
at a pole) is filled flat from its shared boundary nodes, so the rest of the
body keeps its display plan instead of falling back to the reference mesh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* display mesh tests: a rim the chord tolerance leaves a line is divided again (#2814)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* portable B-rep: up to 8192 control points along a spline direction (#2814)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* solidcraft-cli: --debug logs what the engine reports to stderr
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* STEP import: a spline written over a tiny parameter range is read over one (#2814)
Some writers parameterize splines over a few millionths (a humanoid robot's
edges span 5.4e-6). The kernel tells parameters apart only to 1e-6, so over
such a range it evaluated the curve's end wrongly, and trimming an edge to its
vertices dropped a control point: the bodies could not be stored exactly and
the whole model cache was left out of the design. The knots are now stretched
to span one; the curve is the same and edges are trimmed by their vertices, so
nothing read from the file refers to the old parameters.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* model cache: a body keeps its file's declared accuracy (#2814)
A body restored from the cache dropped the accuracy the file it was read from
declares, so the planner held its boundaries to the kernel's own bound and a
reopened design drew differently from the import. It is stored with the body's
runtime values, and only when there is one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* tess: a boundary within a hundredth of its body lies on its surface, at every quality (#2814)
#1721 held a body read from a file to the accuracy the file declares. A writer
declares what it aims for, not a bound its edges keep: a 251-body robot
assembly declaring 0.01 µm has boundaries 10 to 30 µm off their surfaces, and
95 of its bodies lost their display plans. The bound is a hundredth of the
body again, what Normal quality always allowed, and now the same at every
quality, so zooming in still never drops a face (#1721's point). A file
declaring more raises it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* STEP import: keep faces whose edge vertices sit slightly off their curves
Some exporters write an edge's vertex beside the end of its curve, further off
than the accuracy the file declares (a surface export declares
0.01 mm and puts a vertex 0.19 mm off two spline ends). The reader refused
such edges and left the face, and with single-face bodies the body, out.
A vertex may now sit up to the file's tolerance or 1/1000 of the model's size
(the diagonal around its VERTEX_POINTs), whichever is larger, never more than
the existing 1 mm ceiling. Spline and open-conic edges have the end control
point moved onto the vertex, so every such edge meets its vertices exactly.
The file's declared accuracy still governs closed-curve, seam and circle
checks.
* tess, io: review clean-ups (#2814)
- A sliver face is one whose loops are all slit: drop_slits finds it in the
retry after a failed plan, so the pre-check on every face (folded) is gone.
- The flat fill uses cdt::triangulate (a lenient fill that leaves out sides
crossing one already kept) and its flood-fill inside test, and the plane
from geom::Plane.
- Refinement only builds its indexes when a face was refused, takes the
faces to plan again from edge_faces, and re-samples edges on the pool;
Rules::finer for the finer rules.
- One PackageWriter::fits for the model cache, the preview and the thumbnail.
- The band split's ring tolerance lives in split.rs; comments say what the
off-surface bound is now.
- The CLI logger prints Level::as_str().
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: David Lackovic <lackovicdavid1234@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Ray <raykholo@users.noreply.github.com>
Consecutive pieces of a trim loop can miss each other by micrometres to a tenth of a
millimetre, past the file's resolution, so the loop did not close and the face was
dropped. Faces are now read first and sewn after: each small gap's ends, and the other
piece ends at them, move to one vertex. Gaps over 0.1 mm or not small next to their
pieces stay open; the sewing tolerance stays the file's. The stated accuracy covers how
far a vertex moved, so the STEP reader keeps those edges.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
transform_matrix took any finite 4x4 matrix. A perspective entry in the
last row, or a singular linear part, was built into faces that mesh to
nonsense: a revolved ring placed with such a matrix measured hundreds of
millions of mm3, and a boolean on it ran for over half an hour before
failing with "no result". Matrices come from design files and command
parameters, so they are refused with KernelError::Invalid instead.
* claim: #3394
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* STEP export: a merged cylinder or cone face's loop starts on the side its angle grows from (#3394)
A whole-turn cylinder or cone face is written as one loop: ring, seam, ring, seam reversed. Readers lay the ring that follows the seam's first use out from the surface's angle 0, so that ring must turn the way the angle grows (anticlockwise about the written axis). Three of the four tapered legs in #3394 came out the other way and other readers dropped their sides. When the second ring turns against the angle, the loop now starts with it.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Measure: a body whose meshes leave a gap keeps its volume wherever it is
A part ring cut by solid.combine (two prisms through its ends, a notch
through its chamfer) measured 992.03 mm3 at the origin, 999.17 moved
100 mm and 1063.48 moved 1000 mm; it encloses 993.92. The reference
mesher leaves a crack where the notch meets the chamfer's cone: the
volume beside it is left out, and the divergence-theorem sums, taken
about the world origin, close the crack by a cone to the origin, so the
error grows with the body's distance from it.
A closed surface's area vectors sum to zero. When the picked meshes'
sum could move the volume by more than 1e-5 within the body's size, and
the display plan (which shares every edge's nodes between its faces) is
closed, the body is measured on the plan, about its box centre. Every
other body measures exactly as before.
Tests: the cut ring at the origin and moved by up to 10000 mm, against a
grid quadrature of the cut; a revolved ring of cones and cylinders moved
100/1000/10000 mm along each axis (1e-6); a cylinder and a frustum far
from the origin against hand values. Robustness seed 64 moves by 1.4e-6
and is recorded.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Measure: a gap the display plan can't close is measured about the box's centre
When the meshes leave a gap and the display plan isn't closed either, the
sums used to fall back to the origin-based volume, which drifts with the
body's distance from the origin (7 % at 1000 mm for the part ring). The
per-face sums are now taken about the fine mesh's box centre, which closes
the gap by a cone to a point inside the body; over a closed mesh nothing
changes. The gap decision moves into gap_closed, and a unit test with a
cube left open by hand covers closed vs open meshes, the closed plan, and
the fallback with an open plan or none.
Seeds 14, 20, 40, 55 and 61 end with such a body and are recorded with
ROBUSTNESS_GOLDENS_BLESS (volumes move by -0.51 %, +0.16 %, +1.9e-4,
+9.0e-5 and -1.5e-5; steps, outcomes and counts unchanged).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Record robustness seed 86 after measuring bodies whose meshes leave a gap
Seed 86 was added on main by #2387 after this branch's goldens were recorded. Its last
body leaves a gap in its meshes, so the measure change here moves its volume by -0.27 %
and its area by +0.13 %; steps, outcome and counts are unchanged. Seed 86 passes
unchanged on main 57d21013. Every other seed matches on the merged branch.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* measure: take the display plan only where it agrees with the sums to within what the gap could move
A closed display plan meshed less finely than the sums differs from them by its own chord error,
which can be larger than anything the gap explains: an imported part with small blends measured
0.03 % low on its plan. The plan is now taken only where the two differ by at most what the
gap's area could move the volume within the body's size; otherwise the sums about the box's
centre stand.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* measure: sum a mesh left open about its box's centre only, without the display plan
The closed display plan meshes some faces of an imported B-spline part
more coarsely than the sums do, so a body and its boolean pieces no
longer add up: clearance's union cross-check then refused a 17.3 mm3
overlap between two such parts (the pieces implied 20.5). Summing about
the box's centre alone keeps the gap closed by a cone to a point inside
the body and stays consistent with the pieces. Seeds 64 and 86 are
re-recorded with the reason.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* measure: placement tests in the area's test files
The ring and frustum tests join measure.rs's tests, and the cut ring
joins measure_centre_tests.rs (AGENTS.md: a regression test goes into
the existing test file for its area). The goldens note for seeds 14, 20,
40, 55 and 61 describes the centre-only sums.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* measure: keep the origin for a body left open on purpose
A surface, or a cup whose lid is still a separate sheet, has no volume of
its own. Measured about its box's centre, two such bodies stopped
comparing once the centre moved (a crowned lid rises), which broke the
patch crown test. Only a mesh with a small crack is measured about the
centre now.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF
* Robustness goldens: keep main's notes, one note for this change's seeds
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Extrude: a join from a whole face rounded by fillets sweeps the face itself (#2040)
A face's sketch fits an edge that is no line or arc (the quarter-ellipses
where fillets meet a slanted face) as splines a hair off the body's edges,
so a join from the face touched the body along a face it did not match and
failed with "boolean Union: no result" after minutes. When the profile is
a whole planar face of the one target, the join now sweeps the body's own
face, which shares its edges and is sewn on along it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude: a cut into a whole face keeps the walls that cut and moves the others off (#2040)
A cut from a whole planar face sweeps walls from each of its edges. Where
the face beside an edge turns away from the sweep (n_N . -n_P >= 0) the wall
only touches the body along that edge, or lies in the face beside it, and
the boolean failed on it with "no result". The cut now keeps the walls that
go into the body, exactly (the body's own edges), runs the outline round
the others well outside the body, and starts a little out from the face.
A cut whose walls all only touch takes a slab beyond its depth plane.
Not covered: a cutting wall tangent to the face beside a touching one (a
round's wall meeting an end face, as in the issue's part); the boolean
still fails there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude: leave a whole face outlined by lines and arcs to the profile's own tool
Only a face whose outline the projection had to fit needs the body's own face as the tool. A square drawn over a box's top already meets the body exactly, and the swept face lost the names a sketch on the new top attaches to (stacked_face_tests, #489).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Run the whole cut tool from a face under the kernel guard (#2040)
Review: `builder::vertex`, `builder::line`, `Face::try_new` and
`builder::translated` ran outside `crate::guard`; only the sweep was
guarded. `cut_tool` now runs all of it under one guard.
Adds an end-to-end test of a cut into a face the body stands out past
below it (the block's top strip between its rounds): it takes only
what lies over the face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test: the slab cut of whole_face_tool, on a spline prism (#2040)
A prism on a closed spline standing on a wider plate, cut 3 into its whole
top face: the slab takes the face's area times the depth and leaves the
plate alone. A test-only counter asserts the slab was the tool, so the test
cannot pass through the profile's own tool. Shortens the name of the
rounded block's top-face cut test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel: the face's outline as a Vec now that polyline returns a closed chain (#2040)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Build on #1426's import components and nested STEP assembly instances.
Replace placeholder solid labels with meaningful part or instance names.
Translate IGES groups and subfigure instances through the existing STEP
component path, preserving nesting and placements and sewing surfaces
within each group. Bound assembly walks and reuse work buffers.
Related to:
- tangency-labs/solidcraft#1386
- tangency-labs/solidcraft#1426
Co-authored-by: Codex <noreply@openai.com>
* claim: #2570
* Loft: a circle lofted to a non-star-shaped profile is split once round (#2570)
A circle section was split at the lead section's vertex directions, kept in
the lead's order and forced to increase by whole turns. A non-star-shaped
lead (a C, a comb) turns back on itself, so the circle wound round many
times and closed with a negative arc: self-crossing walls and a huge mesh
(which froze the web build while meshing it).
The circle is now split exactly once round: at the lead's directions when
they go round once in order (clockwise on a plane facing the other way),
otherwise at the lead's perimeter fractions, evenly as the fallback. Every
arc is finite and positive and they total one turn; the unbounded loop is
gone. Section preparation is split out as loft_section_loops so the
resampled sections can be checked.
* claim: #2847
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* loft: keep sections turned past 90 degrees facing the same way (#2847)
The loft oriented each section by the sign of its normal against the first section's, so on planes turning about an axis every section beyond 90 degrees was reversed and the side faces folded. Follow the facing neighbour to neighbour instead.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
A curve written over a knot span of 1e-7 or less was refused on the STEP side
("knot vector consists single value"), and both faces it bounds were lost. Its
knots are moved and scaled onto (0, 1), which leaves its shape as it is.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
cone_point and cone_point_vertex join the sweep now that #3871 reads a cone
bounded only by its base circle up to its point.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A BREP_WITH_VOIDS void's faces face into the cavity, so it encloses volume of
the opposite sign to the outer shell. Its ORIENTED_CLOSED_SHELL flag alone
doesn't tell: SOLIDWORKS writes .F. over a shell already facing into the
cavity, SolidCraft .T., and flipping by the flag added the cavity's volume. A
void enclosing volume of the outer shell's sign is now turned inside out.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: regression sweep over the step-conformance parts of known shape
Fifteen generated parts from step-conformance (CC0): plain, NURBS, seamed,
placed, inch and far-away cylinders, domes, a grooved shaft, a plate with 100
holes, a 3.6 m disc, a 0.5 mm pin, a B-spline half-torus and a washer. Each
reads back with its exact volume, its box and its face count. The half-torus
on a TOROIDAL_SURFACE and the cones to a point are left out until they read
right.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP conformance sweep: the pin's volume as FRAC_PI_8 (clippy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A cone face written with no vertex at its point has the base circle as its only
loop (or that circle and a VERTEX_LOOP at the point, which has no edges). Its
surface was spanned over the circle alone, a sliver, so a solid cone came in as
a flat disc. Such a face is now spanned to the apex, and its circle is joined to
the apex by a seam line out and back, as a cone with a seam is written.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Boolean: a small hole in a large body's face stays a hole when the face is divided
A boolean divides faces at a tolerance that follows the larger operand (a few
millimetres on a part a few metres long). A small hole's rim, two half circles
when read from STEP, then became two chords: its polygon in the face's
parameters had no area, and the sign that tells a hole from a face piece came
out at random. The hole became a face of its own, inside out, and the face it
was cut in stayed whole. A box cut round such a hole gave a piece without it,
and the shared part of that piece and a pin in the hole came out negative
("malformed") or the boolean failed.
divide_face now divides a loop whose polygon is flat again, finer (down to a
hundredth of the loop's own size), before reading its sign. Only the polygon
that places the loop changes; loops that have an area are untouched.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Kernel: the long-plate hole test in tests.rs; a flat loop's size from its box
Review: the test moves into the kernel's test file (no file of its own),
and finer_if_flat takes the loop's size from the diagonal of the box round
its sample points instead of the largest distance between any two.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* claim: #3358
* IGES import: trim curves with reversed pieces no longer drop their faces
A curve on a surface (142) gives each trim loop twice: B in the surface's
parameter space and C in model space, running the same way. Some exporters
write C as a composite curve (102) whose pieces are in order but some of
them end to start. The reader passed those pieces on as they were, so the
loop did not close and the STEP reader left the face out ("face boundary is
not a closed loop").
The pieces of C are now turned to run head to tail, starting at S(B(start)),
the point where the parameter-space curve begins on the surface. That keeps
the loop's sense from the file, so holes still run against the outer loop.
A piece whose ends are one vertex at the sewing tolerance keeps its
direction.
On a 9,276-face trimmed-surface car model, 7,887 faces now import instead
of 3,882.
A surface of revolution (120) wrote its arc generatrix as a whole STEP circle, which
turns into a whole sphere twice over when the arc is centred on the axis; the trim could
not pick the cap out of it and the face meshed as the full ball. An arc in a plane through
the axis now comes in as a sphere or torus, any other arc as an exact rational B-spline of
just the arc.
* Tessellation: trimmed faces of display meshes stay on their surfaces
Display meshes triangulate a trimmed face in parameters scaled by the
surface's speed along each, so a strip stretched along one parameter is
not fanned across, and every boundary segment stays a constraint: one that
crosses another is split where they meet. Boolean meshes keep truck's way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Tessellation: one boundary rule for every mesh; drop the #1648 retry
A boundary segment that crosses one already added is split where they
meet in Boolean meshes too, which keeps a pinched face (#1648) whole
without the snap-and-retry. Faces whose segments all go in mesh as
before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Robustness goldens: seeds 1, 23, 55, 64 and 86 re-recorded on current main for #1653
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
* Thread preview test: wait for the stale fit error to clear before the next preview
After switching back from M6x1.3 to M8x1.3, wait_feature_preview stopped at the M6 error still on
screen when the new preview started a few frames later (seen on Linux CI with #1653's meshing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
* Robustness goldens: the slow seeds 14, 20 and 40 re-recorded for #1653 from the merge queue
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* WIP: adopt the saved model on open (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* WIP: tests
* WIP: bench-open opens as Open does
* docs: opening from the saved model
* Tests: an edit after opening evaluates from the feature it changes
* clippy
* Read SOLIDCRAFT_NO_MODEL_CACHE through the env helper
* Open: no picture from the model when the model itself opens; cancel test evaluates
* Saved model: bodies passed through found without writing their record; states list runs of bodies
* Adopted results go into the evaluation cache: an undone edit, or the marker rolled forward, takes them again
* Model cache size guard: the saved model's writer
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3244
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fail an unverifiable intersection instead of keeping what it should trim (#3244)
When every route of the general boolean fails, it falls back on the sampled answer
(one body whole, or nothing) with a "not verified ... that part is ignored" warning,
even when the bodies' facets cross well past their faceting error. For an
intersection that keeps exactly the material it was asked to trim: teeth standing
0.27 mm out of a trimming cylinder came back untrimmed, and `solidcraft-cli run`
exited 0 with a part 16.918 mm in radius.
An intersection whose sampled answer is contradicted by facets crossing by more than
twice the depth the warning reports (6 x the check mesh tolerance, three times the
faceting error of two meshes) now fails, and the model is kept. Cuts and unions keep
the fallback: shelling a body in two pieces relies on it (a cavity tool grazing the
other piece), with the same depth and ignored volume as this case.
Fixes#3244
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Leave an empty unverified intersection as it was (#3244)
Only a doubted intersection that keeps one body whole is refused. An empty
one ("the bodies are apart") stays a result reported unverified: the clearance
and interference checks rely on it, and main's new
a_pin_through_a_d_bore_of_its_size_still_overlaps_the_flat (#2714) expects it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Open: show the design as its bodies are meshed, off the UI thread (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Open: hold screenshots until the design is meshed; profile lines
* Tests: time-bounded opens
* Open: a Loading parts n/N note while bodies are meshed
* Open: frame the design from outlines while it goes into the window
* Outline bounds: vertices and edges only; test
* Frame watch: the window thread's frame times by open phase (SOLIDCRAFT_PROFILE_FRAMES)
* Open: the picture grows in mesh order and stays once complete; refreshes pace themselves; named frame steps; watchdog test
* Open: outlines measured on the file worker and kept per body
* Open: draw the Home picture under the opened file's own key once meshed
* Format the open wait
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3324
* Sheet metal: refuse a flat pattern that no longer matches the body
A feature that is not sheet metal can change a sheet body's material
without its sheet model knowing: a mirror combined into it, an extrude
joined onto it, a fillet or chamfer on a corner. The flat pattern, the
DXF and the bend table then wrote the sheet as it was before, a part
other than the one in the design, with no warning.
The evaluator now notes, per sheet, the first such feature: one that
changes the body's shape while its sheet model stays the same. That
feature warns, and sheet.flat_pattern, sheet.export_dxf (also with
per_body) and sheet.export_bend_table refuse with "not supported yet",
naming it. A sheet metal feature, or machining the sheet keeps as
cut-outs, rebuilds the body from the model: it clears the note and
warns that the change is not kept. Moving the body, splitting its faces
and cosmetic threads leave the flat pattern as it is.
* Sheet metal: a modelled thread is refused in the flat pattern too
Only a cosmetic thread leaves a sheet body's material as it is. A
modelled thread cuts the thread profile into the hole, which the flat
pattern does not have, and a later sheet metal feature dropped it
without a word. It now marks the sheet like a fillet does: it warns,
the flat pattern, DXF and bend table refuse naming it, and the feature
that rebuilds the body says the thread is not kept.
A loft through two sketches on the same plane built a flat body of zero
volume and reported success, so the mistake surfaced later, if at all
(a measure of 0, or a boolean that did nothing).
`loft_wires` now checks each pair of consecutive sections: parallel
planes with the second section's centroid in the first's plane are
refused with "loft sections i and i+1 lie in the same plane (no volume
between them)". The tolerance scales with the section's distance from
its plane's origin.
Test: two circles on XY; the loft fails with that message and leaves no
body.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2672
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Chamfer: one pick follows a straight edge's curved tangent chain at any size (#2672)
chamfer_tool built a single-edge cutter for a straight edge even when the
edge runs on tangentially into an arc (a slot side into its end). The
cutter's overshoot (max(2*distance, 1% of the part size)) is probed for
material beyond the edge ends; on a small part the probe hit the arc's
material and the cutter was refused, so the blend followed the whole
chain. Past a bounding-box diagonal of about 200 mm the overshoot cleared
the arc, the cutter was accepted, and only the straight edge was chamfered,
silently.
A straight edge whose smooth chain contains a curved edge no longer gets a
cutter; it takes the chain-following blend, as at small sizes and as a
fillet does.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Moving an occurrence places every body under it again, and each placed copy
searched every revolved face for where it sits to turn it away from its seam,
although its source had been turned already. On the Prusa Core One assembly
that search was most of the 12.7 s a move of the top occurrence took. A body
now records that its revolved faces are turned, and world placement
(`place_matrix`) skips the search for such a body. Modelling moves (pattern
copies, hole tools) keep `transform_matrix`, which still turns them in the
copy's own frame: where a face wraps all the way round the turn it finds
depends on those coordinates, and later booleans depend on it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Later instances of a part showed a mesh shared through the first instance,
but the first instance meshed its own, so every repeated part was meshed
twice. The first instance of a part placed more than once now shows the
shared mesh too; a part placed once keeps its own (no second copy).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The retries in boolean_whole_inner mesh every candidate to compare its
volume. A nudged union at the coarse tolerance could come out with a face
on a cone whose trim loop ran metres along the cone's continuation (edges
up to 12.7 m outside a 155 mm part); meshing it took seconds to minutes per
face and once never finished, though its volume (+-1e10 mm3) failed the
check anyway.
check() first samples the candidate's edges (16 per edge) and discards a
candidate with a point further outside the operands' mesh box than 5% of
their size (or a non-finite point): no edge of a union, cut or
intersection can lie there. The reason goes into the new
BooleanDiagnostics::rejected (omitted from JSON when empty). Results of
sound candidates are unchanged.
On the reporting design the PitchTail join drops from 18.7 s to 4.3 s with
the same result; the regression tests synthesize a cone face whose loop
runs off its surface.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
truck placed a face that no intersection divides (every face of a shell
that meets nothing of the other) by counting the faces a ray crosses,
taking each face's surface as stored. A revolved body's reversed faces
counted the wrong way, and an inward shell (a void, a cut's inverted
tool) was read as a solid: a cut beside a sealed void came out empty,
refused or, with a tool whose bounding box covers the target, taken with
the body gone. Intersections of such bodies came out empty as well.
In an AND the crossings now count as each face is oriented, and an
inward shell holds what lies outside it. An OR keeps truck's count.
The corrected cut let a folded offset through: an arc edge next to a
face it meets tangentially had its ends moved past its middle, and the
arc went the long way round (robustness seed 73's shell). The offset
refuses an arc whose middle crossed its chord, as it does a straight
edge that turned round.
Goldens: seeds 0, 45 and 77 had a cut refused as empty that now takes
what it should; their volumes are checked by hand in the PR.