Commit Graph
7 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 a0c24b87c0 Kernel tests: the back edge then the arc is one more pair of the rounds-in-sequence test
the_arc_rounded_after_the_back_edge_matches_both_together ran
one_then_the_other(BACK, arc_top()) as a test of its own. It is the same
check as every pair of a_round_ending_in_an_earlier_round_matches_both
_together (the round in sequence against both together, within the
display meshes' 5e-3), which had only the other order (arc_top(), BACK):
the pair joins that list and the separate test goes. Nothing is loosened.

Today the list fails before it reaches the pair: SMLib fails the arc's
round after the long front edge's (status 1001); the back-then-arc pair
failed the same way on its own.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:12:24 -04:00
jyvikoandClaude Opus 5.5 94d763c839 Tests: a round run on through an earlier one by tangent propagation is matched by the same edges together
The arc part's front edge rounded r2, then its left top edge with tangent
propagation (the Fillet feature's default): that edge runs on round the first
round's end arc and down the left front upright, so three edges end up rounded
(a sphere octant at the corner where they meet), not two. Both results were
exact: 9530.77 (meshed) is the part less three r2 strips and the octant,
9591.44 − (0.858407·(39.1667 + 19 + 8) + 8(1 − π/6)) = 9530.83; 9538.79 is
two strips less their overlap, 9591.44 − (0.858407·62.1667 − 0.7670) =
9538.84. The test compares the sequential rounds with the same edges of the
part rounded together: the picks' chains and every edge of the part the second
chain carried on into.

The other pairs still fail in SMLib (1001, or SM_ERR_INVALID_INPUT at the
knife-edge tip) where a later round ends on the first round's arc.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 07:14:45 -04:00
jyvikoandClaude Opus 5.5 0ec97c5708 Blends: tangent propagation off blends the picked edges alone; a refusal says how to change it
The Fillet and Chamfer features already blend each picked edge's tangent chain
by default (tangent_chain, true unless saved false), as mainstream CAD's
tangent propagation does; the kernel blends exactly the edges it is given.
#8678 refused, before SMLib, every edge that runs on tangentially into one left
out, which also refused blends SMLib builds (a round ending on the round its
edge runs into: blend_corner's a_round_next_to_a_round_of_another_radius, the
same feature with propagation off). Now:
- propagation off: only the picked edges are blended; where SMLib cannot end
  the blend at such a continuation, its refusal names the edge it runs into
  and that propagation (tangent_chain: true) blends the chain as one;
- propagation on, where the chain cannot be built (an r3 round carried on
  round an r2 round's end arc), the refusal says the chain was blended and
  that with propagation off only the picked edges are.
A smooth edge is still refused before SMLib. No default changes: the feature's
default was propagation on already.

The kernel tests that stand for a Fillet feature (curvecorner's sequential
rounds, issue 2422) take each pick's tangent chain, as the feature does by
default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 07:14:45 -04:00
jyvikoandClaude Opus 5.5 f860488794 kernel: the rolling-ball, corner, loop and vertex blend builders are gone
curveblend.rs (rolling-ball rounds and chamfers of curved edges, their corners, the law
and chord variants), curvecorner.rs, loopblend.rs (blends round whole face loops) and
blend_vertex.rs (a sphere at three rounded edges) built blends on truck; SMLib's blend
makes all of these in its one call, with its own corners. curvecorner_tests.rs tests
fillet and chamfer through the public functions only, so it stays, mounted from blend.rs.
curveblend_tests.rs and curveblend_law_tests.rs go with the builder: they test its
internals (fit_sections, curve_blend_with_limit, ROLLS, its NURBS surfaces and contacts).

lib.rs needs `mod curveblend;`, `mod loopblend;` and `mod blend_vertex;` removed.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 42997a62ed WIP kernel: Body::mesh(&MeshTolerance) as the one mesher (does not build yet)
Body::mesh / mesh_plan / mesh_of and MeshTolerance (chord, display, display_of, export_of)
replace tessellate, tessellate_with, display_mesh*, display_plan*, reference_display_mesh_angular;
every caller in kernel, doc, engine, io, ui-egui, gpu and the CLI renamed mechanically; the
truck-mesher fallback, mesh_shells*, refined* removed; Body::new orients from the planner;
truck-meshalgo dropped from Cargo.toml with the tests of its hooks. Still to fix: trait imports
in tess/*, splitface/lumps/preview/step_in/boolean_record meshalgo uses, measure.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
Philipp Bischoff 3087363c44 test: three ignored tests pass again and run in CI (#679, #562) (#1663)
Thanks @PhilippBischoff0.
2026-10-16 06:26:13 -04:00
32d3cf6877 Fillets and chamfers meeting at corners on curved faces: what #935 leaves (#854)
* Fillets and chamfers meeting at corners on curved faces, on top of #935

What #935 and #926 leave of #851 and the matrix:

- Corner build for blends meeting on faces of any surface (curvecorner.rs):
  the knife-edge tip's round with the arc's or the back edge's, edges
  picked in any order, a round ending in an earlier round of its radius
  (as a feature of its own), and chamfers meeting at the arc's corner.
  Its end curves are fitted by chord length: a uniform parameter
  through points clustered at the ends doubled back on itself there,
  and the display planner refused the face.
- A straight edge ending at a curved face (the back edge into the
  knife-edge tip): rolled, or cut by the face in the planar corner
  build (blend_corner.rs).
- A rolling ball turning about a rounded corner of its own radius
  (a pivot: a piece of sphere or cone).
- Seams that are an earlier blend's straight contact (fitted curves)
  count as straight.
- No spline across a joint where the strip's curvature jumps (a line
  into a small round): each strip ends on the joint's section.
- Sections at a chain's vertices on the faces of the edge from it
  alone.
- Every new fillet path passes #949's check for openings.

Tests measure volumes through the display plan, as #935's do.
Action matrix: 51 more fillets and chamfers pass (sweep, tangent arc
chain, sheet-metal hem, bracket holes), none fewer. Robustness seed 33
recorded (its last fillet builds differently; display and measured
volumes now agree).

Co-Authored-By: bherbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015bV2ntwLfUHV4JnCMPSyRi

* Corner blend tests: scale, seed 33's volumes, tighter engine bounds

From the review of #854:

- seed_33_display_plan_and_measure_agree: seed 33's bodies measure
  the same through the display plan and the measure (2e-5), which the
  golden's re-record rests on.
- the_arc_rounded_after_the_back_edge_matches_both_together: the order
  that still leaves 0.05 mm³ at the tip, as an ignored test.
- corner_blends_hold_at_any_scale: the cases this branch adds on the
  #851 part, at 0.01x and 100x, take off what they take at full size
  times k³ (within 5e-6, checked to 1e-4).
- The engine tests on the part as drawn measure through the display
  plan; bounds are about twice what each reads (2e-4 to 3e-3), and the
  front corner's sets are checked against the kernel's CSG grid.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015bV2ntwLfUHV4JnCMPSyRi

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 07:40:23 -04:00