* claim: #10127
* Assemblies: a construction axis follows its component when the component rotates (#10127)
A construction axis or point built on a body now goes with that body when
Move/Copy moves or turns it. Each construction records the bodies its picks
lie on; the Move feature (not a copy) carries along every construction whose
bodies it all moved, with the same transform in the construction's component
frame. One that also reads something fixed stays where it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8822
* Tangent Plane: line it up with a reference plane, at an angle (#8822)
`construct.plane.tangent` takes an optional `reference` (a plane or planar
face) and `angle`. On a cylinder, cone or torus the plane touches where the
face turns towards the reference, turned by the angle about the face's axis,
on the side of the pick; on a sphere it is parallel to the reference. The
plane follows the reference when it moves. The Tangent Plane dialog gets a
Reference plane input and, once one is picked, an Angle field; editing the
plane brings both back. Saved as a pending format change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
construction_visible checked the item's own hide and its folder, but not
the placement its component is drawn at, so hiding Part:1 left Part's
planes, axes and points on screen. It now asks feature_placement_visible,
the check sketches already made; the placement path is computed in one
place for both.
A vertex pick found its named edges and then picked each again by a point
on it, among the edges of every body. At a corner where another body's
edge runs past (a wall against a side wall), all three became that edge,
and the vertex its end 3 mm away. Take each named edge's ends from the
body that has it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: a plane through a construction axis follows it in a design with a component
Two offset planes, the axis where they meet and a plane through that axis. Once the design has a
component, a parameter change fails the last plane with "unknown construction `Ax`".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Construction: the root's constructions are found once the design has a component
Problem: once a design has a component, the root's construction features are built in the model
placed in the world. That state carried each component's bodies, sketches and threads, but not
its construction planes, axes and points, so a construction built on another one failed on every
evaluation with "unknown construction".
Solution: the world state carries each component's constructions where the component is placed
(moved by its occurrence's placement, as the bodies are).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* assembly(feat): ground first parts and drag free joint chains
Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(fix): update movable fixtures for first-part grounding
Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(test): keep the motion-cost crank free
Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(test): free the frame placement fixture
Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main.
Signed-off-by: Karl Von Richter<karl@embeint.com>
---------
Signed-off-by: Karl Von Richter<karl@embeint.com>
* Reject ambiguous origin and construction plane names
* Reserve origin plane names for construction planes; suggest the other alias
A construction plane can no longer be created with or renamed to XY, XZ, YZ, Top, Front or
Right, so a plane argument can't become ambiguous in new designs. For older designs that
already hold such a plane, the ambiguity error now also names the origin plane's other
alias (XY for Top...). The existing tests build those legacy names directly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>