Commit Graph
22 Commits
Author SHA1 Message Date
Brennen HerbruckandClaude Sonnet 5.5 5d5dc0e720 kernel-cases: fillets outline and corner cases from #237, #334, #485, #556, #851, #1207, #1213, #1262, #1557, #1667, #2498
Rounds along curved outlines, with the removed volume worked out by Pappus or by integration: merged cylinders, a D prism, a rounded rectangle with 0.02 mm end edges, a long box beside quarter turns, vertical corners after bottom rounds, a bent tube end, a boss's bottom arc, bars running into a boss, an edge ending on a curved wall, and the knife-edge arc corner.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 06:08:51 -04:00
Brennen HerbruckandClaude Sonnet 5.5 23b7d481b1 kernel-cases: fillets refusal, fit and straight-edge cases from #190, #199, #324, #896, #1668, #2752, #2852, #3369, #3435, #4141, #4143
Rounds with their own right answers: a radius larger than the ring it runs along (refused), a pick on a smooth seam (refused), a far edge pick (refused), a round that uses up an end face or a wall, a round over a hole, rounds on both sides of a thin wall and concentric with an inner one, a round on a sphere's flat cut, an edge ending on a tangent seam, and rims on B-spline ramps.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 06:08:51 -04:00
Brennen HerbruckandClaude Sonnet 5.5 d55565e76f kernel-cases: fillets chamfer cases from #814, #1080, #1390, #1986, #2672, #2719, #2797, #2907, #3655, #3779, #3868, #4055, #4101
Chamfers on boxes, plates, discs and sectors with closed-form volumes: all twelve edges in the order that was refused, a concave chamfer that adds material, a chamfer next to square openings and one that runs into them, a hole rim tangent to the bottom face, a hex hole's corner bevels, a one-pick chain on a large part, a bottom loop as wide as the corner round, two distances on a circular rim, the end outlines of a rounded prism, a chamfer over a joined pin, and the equal chamfer of a slanted plug. Spline-sided pillar (invariants only) for chamfer and fillet.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 06:08:51 -04:00
bherbruckandClaude Opus 5.5 0a054bcbdb kernel-cases: booleans from #3404-#4124 (28 cases, 76 skipped)
Cases: mirror of a cut under a wall (#4011), coplanar intersect (#3671), multi-lump
intersect (#3526), split along a face plane (#3447), 64-peg join (#3455), boss on a rod
(#3485), collinear cylinders and pin in a bore (#3497), swept G2 cut (#3604), spokes
tangent to a hub (#3612), sphere and pyramid (#3633), column in a channel (#3665),
extrude to a point on an edge (#3729), emboss on a cylinder (#3782), circle-only join
(#3841), ring on a perforated plate (#3887), symmetric revolve cut (#4008), walls round a
floor (#4058), slab beside a bore (#4095), and others. The rest are skipped with a reason
in skipped-c.json.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:57:05 -04:00
Brennen HerbruckandClaude Sonnet 5.5 e80dbde005 kernel-cases: sheet-metal skipped sources (87)
Every other sheet-metal-keyword issue and PR, one line each: UI, docs, file
format, naming and attachments, DXF output, feature requests, user designs
with no repro, and failures that belong to booleans, fillets, shell, sweeps
or threads.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
Brennen HerbruckandClaude Sonnet 5.5 33a52ff053 kernel-cases: sheet-metal tray and unfold cases from #349, #405, #436, #514, #723, #1797, #3417
Trays at 72 degrees and with four angles and heights, a tray shrunk by a
parameter and unfolded, an L bracket unfolded and refolded, opposite flanges
at 105 and 120 degrees, torn corners folded, and a rhombus whose square
reliefs would overlap.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
Brennen HerbruckandClaude Sonnet 5.5 76fede4276 kernel-cases: sheet-metal convert and unfolded tray cases from #479, #488, #723, #725, #839, #1092, #1285, #1481
Unfolded trays graded by the flat size W + 2(H - BD): torn, round and square
relieved corners, per-feature reliefs, rounded plate corners; a shelled tray
and a bracket converted at their bends; an L converted to the rule's radius.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
Brennen HerbruckandClaude Sonnet 5.5 cce2c57b0b kernel-cases: sheet-metal flange and cut-out cases from #416, #529, #570, #601, #634, #659, #702, #978
A flange beside the leg of an L, along what a cut-out leaves of an edge,
beside a ledge as tall as its setback, a return on a flange's far edge, a
round hole, a slanted slot and an ellipse across a bend, a hundred slots with
four folds, and the refusal of rule values sheet.flange would ignore.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
Brennen HerbruckandClaude Sonnet 5.5 7f9345608d kernel-cases: sheet-metal cut-out, flange and refusal cases from #296, #1095, #1280, #1295, #1311, #1979, #3078, #3234, #3324, #3353
Cut-outs folded and refolded, a hole square to a 45 degree flange, a slot
that parts a flange from its base, an inside flange on a plate turned
62 degrees, cuts after cuts, a hole beside two adjacent flanges and a flange
on a flange's side edge; refusals for a flange on a bend line and a flat
pattern after a fillet; a mirrored sheet body that must stay sheet metal.
Volumes by hand (K = 0.5 folds: flat area * t; otherwise bend volumes).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
Brennen HerbruckandClaude Sonnet 5.5 5140736d1e kernel-cases: sheet-metal convert and hole cases from #774, #1040, #1092, #3316, #541, #542, #560, #955
Plates converted to sheet metal (holes, long thin strips, engraving, a
channel with modelled bends, position kept) and holes and cut-outs
through or into a sheet; volumes by hand from the plate and the holes.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
Brennen HerbruckandClaude Sonnet 5.5 30796b2646 kernel-cases: sheet-metal fold cases from #262, #264, #638, #639, #685
Folds of tabs and plates, graded by closed form: a fold keeps the blank's
flat length, so V = flat area * t + theta * w * t^2 * (1/2 - K). Tabs
on one line (#264, #638), a tab on an L's inside edge (#639), a fold just
inside a tab root and a refusal at the root (#262), a fixed point on the
top face of a large plate (#685).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
bherbruckandClaude Opus 5.5 9029c693f3 kernel-cases: booleans from #2896-#3383 (11 cases) and the skipped list
Cases for the near-contact gap join, a countersunk hole beside a distant
body, a perforated plate under a ring, a sealed void, a rim and tooth join,
a frustum cut, a line-to-line pin, a flush notch, spoke patterns and a join
into a rotated occurrence. The rest of the bundle is in skipped-b.json with
one line each.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:50:12 -04:00
bherbruckandClaude Opus 5.5 dfc6328ca7 kernel-cases: booleans from #2564-#2896 (11 cases)
Hand-derived cases for tapered and collinear extrudes, pattern and mirror
copies keeping their targets, a cut up to a face, a prism joined to a
round-cornered slab, a clip round a small hole, and near-contact joins.

2564, 2583, 2601, 2754, 2755 (pattern, mirror), 2801, 2810, 2826, 2580,
2896 (overlap)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:50:12 -04:00
bherbruckandClaude Opus 5.5 9824189915 kernel-cases: booleans from #13-#2534, first half (30 cases, 73 skipped)
Spheres cut twice (#1717), box/cylinder intersect (#1647), crossing cylinders
moved far (#1649), coaxial cut from a thin disc (#500), coincident cylinder
walls (#114, #2008, #1910, #1865), rim touching a coin (#168), holes along
walls and beside rounds (#559, #562, #1279, #1355, #2055), tangent holes
(#307), blind cut in a cylinder (#308), through-all cut (#423), shallow cuts
(#1858), skin left by a short cut (#1730), delete face (#1927), collinear
extrude sides (#1949), hidden bodies (#2464), mirror and patterns (#2003,
#2524, #2076), tapered extrudes (#831), text cut (#1195), split (#13).
Every other item in the bundle is in skipped-a.json with its reason.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:49:10 -04:00
Brennen HerbruckandClaude Sonnet 5.5 71841d3d5d kernel-cases: tessellation skipped sources (253)
Every other tessellation-keyword issue and PR, with one line each:
rendering and GPU drawing, UI, performance, display-plan plumbing, and
failures that belong to booleans, fillets, threads, import, shell,
sheet metal or crashes.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:48:32 -04:00
Brennen HerbruckandClaude Sonnet 5.5 57b72b5334 kernel-cases: tessellation cases from #311-#2712 (14 cases)
311 ramp cut across a round blank, 784/811 filleted and drilled bodies
for STL export, 818 blind hole in a filleted ring, 819/921 pocket that
splits a wall seam, 1263 concave arc with a knife-edge tip, 1615/1653
crossed lofted tubes, 1648/1850 sphere touching a box edge, 1666/1670
two twisted lofts, 1753 bowl rim cut by a cylinder, 1813/2712 lens face
thinner than the tolerance, 2069 notched ring moved far away, 2528
slot joined with an overlapping cylinder.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:48:32 -04:00
bherbruckandClaude Opus 5.5 871b7cea11 kernel-cases: crashes and hangs from the #140-#4149 reports (9 cases, 45 skipped)
140 join with a pad hanging past the edge, 1219 bore fillet then grooves,
1985/2243 STEP export of two enclosures, 3540 cut with a coincident cylinder
face, 3685/1559 delete a fillet face, 4092 loft + ribs + pad union (two
recipes), 2992 disk and 36 twisted loft blades. Everything else is skipped
with a reason (private designs, other areas, UI, perf only).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:47:59 -04:00
bherbruckandClaude Opus 5.5 eb61abb3f3 kernel-cases: import from #1721-#4006 (19 cases, 59 skipped)
STEP: 3730 void shell flag, 3098 tiny-knot B-spline edges, 2043 opposing
surface sense, 3208 extruded ellipse over its seam, 3352 vertex off its
curve, 3963 closed spline edge, 4005/4006 near-degenerate cones, 3871
cone point, 3880 seam cylinder and dome, 1721 closed B-spline tube.
IGES: 3806 revolved arc cap, 3845 trim gaps, 3359/3913 reversed trim
pieces, 3886 tiny knot span, 3912 reversed hole trim, 3972 two boxes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:43:31 -04:00
bherbruckandClaude Opus 5.5 c97887e604 kernel-cases: shell and offset from #12-#4144 (21 cases, 59 skipped)
4009 closed shell, 4010 shell open at a hole wall, 2531 point pick after an edit,
3468/3898 offset next to a fillet, 12 split face piece, 566 swept bar, 745/3893
freeform boss (two variants), 3103 tapered cylinder, 3669/2990 loft, 3283/3650
and 2939 curved offsets, 3506 and 1972 split then shell, 3576, 391, 1494, 1525.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:42:46 -04:00
bherbruckandClaude Opus 5.5 f932aec784 kernel-cases: the no-keyword kernel items, #25-#4148 (4 cases, 98 skipped)
Cases: #3702 (a board in the cavity of a case with a filleted rim, cut leaves the case
unchanged) and #258 (STEP cone to a point, with and without an apex vertex, and the 0.5 mm
pin). Everything else in the bundle is skipped with a reason in skipped-other.json.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:40:18 -04:00
bherbruckandClaude Opus 5.5 6a03284ea9 kernel-cases: an smlib feature for the CLI, and no grading of a kernel the build isn't running
- solidcraft-cli and solidcraft-engine forward an `smlib` feature to solidcraft-kernel/smlib, so
  `cargo build -p solidcraft-cli --features smlib` gives the rig SMLib's check.
- solidcraft_kernel::boolean_kernel() says which kernel this process runs booleans on.
  `default` until the SMLib switch (SOLIDCRAFT_BOOLEANS=smlib) lands and answers there. An smlib
  run on a build without the switch reports "not supported yet" instead of grading the default
  kernel under SMLib's name.
- An area may keep its skipped list in parts (skipped-<part>.json).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:31:54 -04:00
bherbruckandClaude Opus 5.5 57bc3c5623 kernel-cases: a regression rig that grades each kernel against the case's own answer
Every geometry case the old kernel got wrong becomes tests/kernel-cases/<area>/<id>/: an
engine script or oracle recipe, and expected.json with the right answer, from analysis or a
hand calculation, or else the invariants. Never a kernel's output.

- solidcraft-cli kernel-cases <dir>...: runs a case and grades it. The checks are the outcome
  (succeeds, or refuses cleanly), the body count, and one closed shell per body that passes the
  record's structure and geometry checks and, with SMLib built, SMLib's check(All). Counts,
  volume, area, centroid and box are graded where the case gives them. Each run is pass, fail,
  not supported yet or crash.
- cargo xtask kernel-cases [--kernel default|smlib|both]: one process per case, so a native crash
  or a hang (--timeout) is that case's result. It writes docs/kernel-cases.md: coverage per area
  and source, results per kernel, and the sources looked at and skipped (<area>/skipped.json).
- solidcraft_kernel::validity and smlib_built, which the rig's checks use.

tests/kernel-cases/README.md gives the format.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:23:13 -04:00