5c0e48ed2bc2e8d4ce0baa86cd52c4218f1b68fb
267
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
+30 |
d4ec5e6811 |
Sync pinned main into render (#5869)
* Viewport: show reference geometry through bodies (Preferences, off by default) (#2697) A new Graphics preference, "Show reference geometry through bodies", draws inactive sketch contours, origin and construction planes and their axes over shaded bodies. It is off by default, so the viewport looks as before: reference geometry is depth-tested and a section leaves it whole (#1229); Create Sketch and dialogs picking a plane still draw the planes through the model. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * ui-egui tests: offscreen GPU tests start their devices one at a time (#3989) (#3990) * claim: #3989 * ui-egui tests: offscreen GPU tests start their devices one at a time Every offscreen test started a wgpu instance of its own, and starting one makes the Vulkan loader scan its drivers. With several test threads two tests doing that at once crashed the test process with SIGSEGV inside the loader (loader_icd_scan). offscreen_device now holds a process-wide lock while it starts the instance, adapter and device; each test keeps its own device and the rendering still runs side by side. * DXF: write and read a Bézier at its own degree (#5269) (#5281) * claim: #5269 * DXF: write and read a Bézier at its own degree (#5269) The DXF writer and reader held a spline's degree to 7, the value MAX_BEZIER_DEGREE had before #1642 raised it to 9. A G4 blend (one Bézier of degree 9) was written as a degree-7 SPLINE over its first 8 control points, so a flat pattern's cut-out stopped 4.444 mm short in the file. - seg_shape takes its limit from MAX_BEZIER_DEGREE: a Bézier is written whole, at its own degree. - read_dxf reads SPLINE degrees 1 to MAX_BEZIER_DEGREE, the degrees a sketch spline takes. - Tests: every Bézier degree 4 to 9, a degree-9 round trip, the reader's degrees, hostile SPLINE degrees and too few control points, the G4 cut-out exported and read back with its areas, and a degree-9 SPLINE with 2 to 10 points inserted into a sketch. Fixes #5269 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Renaming a plane keeps its projections, canvases and hidden state (#4353) (#4354) * claim: #4353 * Renaming a plane keeps its projections, canvases and hidden state (#4353) timeline.rename only renamed the feature in other features' references. A sketch's projection of a construction plane, a canvas placed on it and the hidden list keep it by name too, so they lost it: the sketch warned that the plane no longer exists, the canvas left the view and a hidden plane showed again. Document::rename_feature_keys renames it in sketch links and canvases, as rename_body_keys does for bodies; the selection follows in the command, and the hidden list in Session::refresh_from, so a hidden plane stays hidden through undo and redo too. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Browser: add Rename and Delete to feature menus (#3839, #4343) (#4342) * claim: #3839 * fix(ui): add Rename and Delete to browser feature menus * Browser: a second click on a Document Settings entry closes its window (#4150) (#4152) * claim: #4150 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Browser: a second click on a Document Settings entry closes its window (#4150) Each entry under Document Settings only opened its window. A second click on Units closed the menu on the press (the row is outside it) and opened it again on the release; Precision left Preferences open; Parameters and Design Properties came back as a fresh copy. Now a click on an entry whose window is open closes it the way the window's own x does: - Units: context_menu::toggle_for with the row as the opener, the fix #1522 made for the workspace button's menu. A right-click still opens it at the pointer. - Precision: prefs::close(app, true), the Cancel/x path that puts back what changed since the window opened (now pub(crate)). - Parameters and Design Properties: the window is dropped, as its x does. A Parameters value typed but not applied yet is dropped with it, as today's second click already drops it. Fixes #4150 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Preserve expression-positioned sketch fillet corners (#4097) (#4106) * claim: #4097 * Sketch fillet keeps a corner placed by an expression (#4097) Filleting a corner whose position comes from parameter expressions deleted the point and its expressions, so the sketch gained two degrees of freedom and later parameter changes distorted the outline. keep_corner now also keeps fixed or expression-positioned points as virtual sharp corners. * Fix feature editor picks after upstream sketch resizing (#4083) (#4084) * claim: #4083 * Feature editors refill named edges and faces where they are now (#4083) After an upstream sketch change, Fillet, Chamfer, Shell and Draft evaluated correctly, but their editors refilled the originally clicked points and could then fail with "no edge at ...". Resolve the stored names through the document's naming helpers first, keep the resolved index, and map the pick into the displayed body's frame; the point lookup stays as the fallback. * ui-egui tests: clear the texture deltas of the frames they run (#4039) Nine tests dropped an egui frame's output with its texture delta still unapplied (the expression completion editor's frames, the slot preview's three, the browser's feature rows). epaint asserts against that in debug builds, so they failed under the dev profile and passed only where debug assertions are off. They clear the delta as the other tests do; one more hover test that dropped its output the same way does too. * Frames: profile library, members along frame sketch lines, and the Frame Member dialog (#4003) (#4004) * claim: #4003 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: the profile library (#4003) The first slice of frames and weldments: the cross-sections structural members will be made of, each SolidCraft's own parametric definition built in code (no vendor or standard size tables are shipped). - solidcraft_doc::frame: bar, round bar, rectangular and round tube, angle, channel, I-beam and a generic T-slot extrusion as exact line/arc regions, with defaults worked out from the profile's size, refusals that name the dimension that does not fit, anchors and placement, and exact section properties (area, centroid, Ixx/Iyy/Ixy by Green's theorem). - frame.profile.list, frame.profile.properties (with mass per metre for a density) and frame.profile.insert (draws a profile into a sketch, locked by default, at a point, anchor and angle). - Tests against hand-computed values (rectangles, circles, composite rectangles by the parallel-axis theorem, fillet spandrels), hostile input, extrusion volume, undo; catalog entries in every locale; docs/frames.md; ROADMAP M15. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: drop the built-in T-slot profile (#4003) Aluminium extrusions and other vendor sections come from the user's own sketch (drawn or inserted from the vendor's DXF), so the library keeps the plain steel shapes only. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: members along frame sketch lines (#4003) frame.member lays one body per straight line of a frame sketch (2D lines or 3D sketch lines), its cross-section square to the line from end to end: - profile: a built-in profile, or profile_sketch, a sketch whose material (nested loops alternating, so two circles make a tube) is the section in its own x and y around its origin; profiles picks override it. - anchor (origin, centre, centroid or a bounding-box corner or edge middle), angle (an angle expression, so a parameter), mirror. - Orientation: the profile's y as near world up as the line allows, x square to both; a vertical member's x is world X (frame::member_axes). - Members follow sketch and parameter edits, undo as one step, save and reopen (format: pending/frame-members.rs), and are named after the profile (Rect Tube 40x40x3, (2)…), numbering on past names already taken. Tests against hand-computed volumes and bounding boxes (rectangle, 3D tower lines, parameter edit, sketch tube profile and picks, anchor/angle/ mirror), refusals, undo/redo and reopen; walk fixtures and goldens; docs. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: fixes from the adversarial review (#4003) - Default member lines are what was drawn: projected and other linked curves and 3D wires (a face sketch's edges) and lines of no length are left out. - A profile sketch's material starts from its drawn profiles, as solid.extrude's "all" does, so a section sketched on a face works; the even-odd test uses outlines and boxes worked out once, capped at 256. - Member names are pinned to their lines (`names`, by line id; `body_name` is the base): deleting or adding a line, or deleting another feature, no longer renames other members, and frame.member stores every name it gives. body.rename renames a member on its line (also for later member features); a copy whose body_names were set still names its members by position. - Built-in profile dimensions are expressions (ProfileSpec): they follow parameters, bare numbers take the design's units, and they are feature inputs. frame.profile.properties/insert read them the same way. - Default root/toe radii shrink to the room a thick section leaves; radii given are checked by name; a radius must be 0 or at least 0.01 mm; error messages report the wall or flange value given, not twice it. - A line within 1e-6 rad of vertical orients as vertical, so rounding never turns a post a quarter turn. - A 2D frame sketch in a differently placed component is mapped into the member's frame, and member features recompute when placements change. - Caps before lookups for a design's `lines`; a line listed twice is refused; a 3D wire that runs back on itself is not a line. Regression tests for each, from the review's scenarios. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: the Frame Member dialog on the ribbon (#4003) - Frame Member (MODEL > Create) opens a dialog: the frame sketch's lines picked in the view (or All Lines), a built-in profile and its dimensions or a section picked in another sketch, anchor, angle, mirror and name, with a live preview. Edit Feature reopens it filled in. - Lines picked in the view keep their sketch (a SKETCH_LINES input picks ExternalSketchCurve): line ids are each sketch's own, so two 3D sketches both have a `w2`, and the members went on the newer sketch's lines. - timeline.redefine takes frame.member. Members keep their names through an edit unless it gives them a new body_name; frame.member takes `names`. - A member whose section is a whole profile sketch keeps it when edited (the dialog shows the sketch instead of picking every region, which would fill a tube's hole). - An original frame_member icon, open for review, on the ribbon, timeline and browser. - The angle profile is listed as L-Angle, and web and flange as Web/Flange thickness, so they translate apart from the existing Angle, Web and Flange; the dialog's labels are in en, ja and zh. en-GB no longer repeats the frame command labels it spells the same. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Rectangular and circular pattern: copies that miss the body are reported (#3042) (#3919) * claim: #3042 * Warn when cut pattern copies remove no material A rectangular or circular pattern whose copies miss the body succeeded silently and those copies did nothing. The pattern now reports how many of its cut copies removed no material, and keeps the copies that land. * Delete in a rolled-back history warns about the features after the marker (#3471) (#3698) * claim: #3471 * Delete in a rolled-back history warns about the features after the marker (#3471) With the timeline rolled back, the checks a delete runs first (the confirmation's "these features will fail", timeline.dependents and selection.delete's would_fail) compared models evaluated only up to the marker. Features after it, broken by the delete, were not listed, so their error marks turned up only once the timeline moved to the end. newly_broken_in_history evaluates both sides over the whole history when either has a marker (on copies; the model and document are unchanged) and is used by the delete's report and by timeline.dependents. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * macOS: Fusion navigation preset does not support Shift + two-finger orbit (#3446) * Macos: keep touchpad/key modifiers true to fusion * fix: remove obsolete orbit snap reset from trackpad navigation Upstream removed ViewportState::orbit_snap. The new trackpad orbit path retained one reference, causing E0609 in the PR merge build. Validation: all seven trackpad tests pass; cargo check -p solidcraft-ui-egui --all-targets passes on the exact failing CI merge 66a2791b with this fix applied; rustfmt and diff checks pass. Co-Authored-By: GitHub Copilot <noreply@github.com> * fix: retain Fusion trackpad help in refactored preferences Preserve upstream's new preferences pages and apply the translated Fusion trackpad tooltip in prefs/navigation.rs. Validation: cargo build -p solidcraft passed. Tests and full CI were not run, as requested. Co-Authored-By: GitHub Copilot <noreply@github.com> * style: format Fusion trackpad preferences tooltip Apply rustfmt's required wrapping for the relocated tooltip. No behavior changes. Validation: cargo fmt --all -- --check and git diff --check passed. Co-Authored-By: GitHub Copilot <noreply@github.com> --------- Co-authored-by: GitHub Copilot <noreply@github.com> * 2-point circle takes a typed diameter (#3278) (#3335) * claim: #3278 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * 2-point circle takes a typed diameter (#3278) After its first point the 2-point circle tool showed no value box, so the circle could only be sized with the cursor. It now shows a Diameter box, like the centre circle: the typed value puts the second point that far along the cursor's direction, and Enter draws the circle. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Phanoob <phanoob@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Reorder design tabs by dragging them (#3187) (#3188) * claim: #3187 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reorder design tabs by dragging them (#3187) A tab dragged along the strip follows the pointer while the others make room, and lands where it is released; Escape, or releasing down the window, leaves the order as it was. With the custom title bar a drag that starts mostly up or down (or on the only tab) still moves the window. The control channel's ui.documents gains a move action (from, to). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Phanoob <phanoob@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Renaming a body keeps the evaluated timeline, off the window thread (#2467) (#2468) * Renaming a body that later features change evaluates nothing (#2467) Model::rename_body now keeps the results when later features change the body (a pattern, a chamfer, a join). It still evaluates when a body of that name comes and goes or isn't the same body throughout, when a later body's name is worked out from it (X (2)), or when a message quotes it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rename box: rename off the window thread, and locked bodies follow a rename (#2467) The rename box commits body.rename through run_heavy, so a rename that still evaluates later features (one names the body in its targets) computes beside the window instead of freezing it. Locked bodies now follow a body.rename from anywhere (the rename box, the control channel, scripts), not only the rename box. --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Toolbar: a constraint dragged out of the small box becomes a full button (#5254) (#5456) * claim: #5254 * Toolbar: a constraint dragged out of the small box becomes a full button (#5254) The Constrain panel's small box of constraint icons was a fixed list, so dragging one onto the full-size buttons saved a new order but it was still drawn in the box. The toolbar settings now remember, per tab, which box commands were moved out; those are drawn as full buttons, the box closes up, and dropping one back on a box icon returns it. Reset Toolbar restores the default box, and settings saved before this load unchanged. * Sketch offset keeps its source lines free to turn (#4464) (#4466) * claim: #4464 * Sketch offset keeps its source lines free to turn (#4464) An offset adds a Parallel between each source line and its offset line. Since offsets became associative, the offset's points are held during a solve, so each Parallel pinned its source line to the offset line's current direction: a closed chain lost its turning freedom (8 degrees of freedom became 6), and Horizontal or an angle edit on a source line was refused as conflicting. The solver and the constructive reading now leave out a Parallel that ties an offset line to the source it follows while the association lives; the association already keeps them parallel. After Break the stored Parallel drives again. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Flat Pattern view draws perforations (#4440) (#4441) * claim: #4440 * Flat Pattern view: draw perforation holes (#4440) The flat view drew the outline, cut-outs, pockets and bend lines but not perforation fields, though the flat-pattern data and the DXF export list their holes. The view now reads the hole centres from the sheet through SheetBody::perforation_holes, caches them per model state and body, and draws them as circles in the cut-out style. Holes outside the viewport or smaller than one pixel are skipped, and the cache is capped at one million holes. * "Don't Save" looks like a button in the Save changes prompt (#4380) (#4400) * claim: #4380 * "Don't Save" looks like a button in the Save changes prompt (#4380) The prompt's third action used the kit's low-emphasis text style, so it didn't read as clickable and people thought Cancel was the only way out. Add an opt-in secondary_left style to the confirm footer (a framed secondary button from the theme tokens) and use it for Don't Save. * Save prompt test: clear each frame's texture delta once it is applied egui 0.36 panics when a TexturesDelta with unapplied deltas is dropped; the test kept only the last frame's output and dropped the earlier ones. * 3D mouse test: clear the frame's texture changes, so it passes in debug builds (#4382) each_frame_hands_the_view_its_motion_through_the_drivers_mapping dropped the output of a frame it ran (`let _ = ctx.run_ui(...)`). epaint panics in debug builds when a TexturesDelta is dropped with deltas left ("Dropped TexturesDelta with 1 unapplied deltas"), so the test failed under a plain `cargo test` on every platform while the ci profile passed. It now clears them, as the other UI tests do since #60. Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Spanish (es-ES): catch up with en.json (#4292) Co-authored-by: carlymx <24634598+carlymx@users.noreply.github.com> * Esc ends the navigation bar's Pan, Orbit and Zoom modes (#4226) (#4233) * claim: #4226 * Esc ends the navigation bar's Pan, Orbit and Zoom modes (#4226) The nav bar toggled a mode on, but nothing cleared it on Esc, so a left drag kept panning, orbiting or zooming. Esc now ends an active nav mode first; the next Esc reaches the tool or dialog as before. * Keep long Select Other labels inside the popup (#4209) (#4225) * claim: #4209 * fix(ui): bound Select Other labels and expose full names (#4209) * Deleting an inserted file removes its components, placements and joints (#4100) (#4113) * claim: #4100 * Deleting an inserted file removes its components, placements and joints (#4100) A STEP or mesh file inserted into a design makes a component tree. Deleting its feature left that tree behind: the components, their occurrences, the rigid joints that hold them and the bodies' component assignments. A later body that took an imported body's name was then placed in the stale component. Document::remove_component_tree removes a component subtree and everything that refers to it: the features made inside it, its occurrences, the joints on them with their motion links, joint origins, contact set members, motion study keys and exploded moves, body component and offset entries, standard part and link records, and configuration columns. Deleting an inserted file's feature and component.delete both use it; component.delete now also removes joints left pointing at a deleted occurrence. The body transfer refusal moves with it, unchanged. * Only an inserted file's feature takes its component tree when deleted Mark the feature a STEP, IGES or mesh insert makes (`inserted`), and remove the component tree on delete only for those and for a linked design's feature. Deleting a copied component's independent base deletes just that feature, as before. Older designs get the mark as they open (pending format change), except copied components' independent bases. * Rigid joint saved with the wrong occurrence when two occurrences share a component (#3857) (#3939) * claim: #3857 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Joint dialog: a body of a further instance picks that occurrence, not the component's first (#3857) Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> * Cancel Sketch: leave a sketch without keeping its changes (#3838) (#3938) * claim: #3838 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 * Cancel Sketch: leave a sketch without keeping its changes (#3838) sketch.cancel (Cancel Sketch, ribbon Exit group and the sketch's right-click menu) puts the design back as it was when the open sketch was created or opened for editing: a new sketch is removed with its dimension parameters, an edited one returns to how it was. It is one undo step, so Undo goes back into the sketch. The session remembers the design and the undo history at the point a sketch is entered. Cancel uses that only while the history still runs through it (the same steps before, every step since taken in this sketch); otherwise it refuses and points to Undo, so a stale entry can never throw away later work. The icon is the approved close glyph in the sketch accent (alias sketch_cancel); ja and zh carry the new label. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * 3MF import: name a Bambu Studio project's bodies after its objects (#3858) (#3859) * claim: #3858 (3MF import: names from a Bambu Studio project) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * 3MF import: name a Bambu Studio project's bodies after its objects (#3858) Bambu Studio leaves the name off the root model's objects and keeps it in Metadata/model_settings.config (<config><object id="N"><metadata key="name">), so every object of a project came in as Mesh1, Mesh2, ... A build item whose root object has no name of its own now takes the object's name from those settings. A name in the model still comes first, and part names, other settings and objects of other model parts are left alone. The settings are read only when a body needs a name, within what the model parts left of the 1 GB budget. Settings that can't be read (malformed, nested too deeply, too large) never fail the import: the bodies keep the generic names, with a warning saying why. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Viewport: right-click keeps a multi-selection of faces and edges (#3733) (#3788) * claim: #3733 * Viewport: right-click keeps a multi-selection of faces and edges (#3733) --------- Co-authored-by: AhmetV <344941595+ahmetv10@users.noreply.github.com> * Parameter import and image pickers offer their own file types (#3216) (#3314) * claim: #3216 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Parameter import and canvas image pickers offer their file types (#3216) Both opened the picker with no file type of their own, so it listed only designs, CAD files and meshes (and All files). macOS lets you pick only the types a filter names: CSV parameters, and PNG or JPEG images for a canvas, were greyed out. They now ask for csv/json and png/jpg/jpeg, which the picker lists first (#1801). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Phanoob <phanoob@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Return to the originating tab after finishing a sketch (#3250) (#3264) * claim: #3250 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Return to the originating toolbar tab after finishing a sketch (#3250) A sketch started from SHEET METAL or PLASTIC always ended on the SOLID tab. Remember the tab that was active when the sketch began (UiState::sketch_return_tab, not saved) and go back to it when the sketch ends. Falls back to SOLID when that is not one of the normal toolbar tabs. A sketch started from SOLID behaves as before. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Test: no one-element loop in the return-tab test (clippy single_element_loop) Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> * STEP import: let a cancelled import release the import slot (#3171) (#3189) * claim: #3171 * Release cancelled file import slots (#3171) * Dragging a part along its joint no longer highlights what's under the pointer (#5137) (#5140) * claim: #5137 * Dragging a part along its joint no longer highlights what's under the pointer (#5137) The viewport's hover pick was skipped during a box selection and camera moves, but not while a jointed part was dragged, so faces and edges under the pointer lit up on every frame of the drag. The pick now waits until the joint drag ends. * Browser: a body picked in the viewport is opened to and scrolled to (#3005) (#3081) * claim: #3005 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Browser: a body picked in the viewport is shown in the Browser (#3005) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Merge main; viewport::select takes a toggle flag now Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Phanoob <phanoob@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Line tool snaps a diameter through the circle centre (#4326) (#4327) A line drawn across a circle only snapped its end onto the curve, so a diameter could miss the centre at any angle. Near the centre the line now locks onto the radial line: on the rim it stays on the circle and the centre is kept on the line, and on the centre point the end lands there. * Flatpak: find the host's fonts for CJK text and the font list (#5124) (#5127) * claim: #5124 * Flatpak: find the host's fonts for CJK text and the font list (#5124) Inside the Flatpak sandbox the host's fonts are mounted at /run/host/fonts and /run/host/user-fonts, which no font search looked at. Japanese and Chinese text fell back to boxes, and the font list missed the host's families. - Search both folders for the CJK and Chinese fallbacks and for the installed-font list. - The CJK fallback reads SOLIDCRAFT_FONT_DIRS (a path list, as the font list already does), with CRAFT_FONTS_DIR kept as a fallback. * Crash reports: keep component.activate in the journal (#5079) (#5121) * claim: #5079 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Crash journal keeps component.activate (#5079) Activating a component changes only the session's active component and occurrence path, not the design, so the journal dropped the command and a crash report's replay built later parts under the previously active component. The journal now also keeps a command that changes either. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Control channel and MCP on by default, with a setting to turn it off (#5561) The app opens its localhost control channel on port 27878 (or the next free one) unless Preferences > Assistant turns it off; --control and SOLIDCRAFT_CONTROL_PORT still win. A current.port discovery file lets solidcraft-cli mcp find the running app with no arguments. Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> * Tests: moving an occurrence recomputes only the cuts and joins it touches (#4965) (#4982) * claim: #4965 * Joins and cuts follow only the placements they depend on (#4965) Tests that turning a joint between parts cuts no hole again, and that a tool cutting another part cuts again when that part moves relative to it, while an unrelated part moving keeps the result. Booleans and Combine now hash only the placements of the bodies they take as inputs, relative to the frame that evaluates them (#3397), so these pin that behaviour for joins and cuts with named targets across parts. * fix(ui): preview shortcut chords and wait for complete modifier input (#1810) Keep physical modifier events out of the ordinary-key slot, preview held keys immediately, and confirm after release and a one-second settling interval. Preserve legacy control-channel modifier behavior while allowing explicit physical Control/Command input. Add regression coverage, a UI scenario, localized guidance and documentation. Fixes #1809. Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> * Move: scope box selection to the active component (#4459) (#4527) * claim: #4459 * fix: scope Move box selection to active component (#4459) * Delete removes a selected construction axis (#4692) (#4695) * claim: #4692 * Delete removes a selected construction axis (#4692) Delete on a construction axis skipped it with "the origin axes can't be deleted". It now deletes the construction axis feature, like construction planes; the origin axes X, Y and Z are still refused. * Agent chat: end the agent's process group where `kill` is busybox' (#4587) (#4588) * claim: #4587 * Agent chat: end the agent's process group with the system call (#4587) The group was signalled with a `kill` program: `kill -s TERM -- -<pgid>`. That works with procps' `kill` and with BSD's, but busybox' `kill` takes no `--`: it prints its usage, exits 1 and signals nothing. The agent's helpers (the CLI an adapter wraps, the MCP servers it starts) then stay alive after the agent is ended. The group is signalled with the system call instead, so no `kill` program and no shell are needed and the behaviour is the same everywhere. `nix` (MIT) is already in the tree through zip, and only on Unix: the browser build does not take it. The two tests that cover this now pass where they failed before: `agent_chat::process::tests::dropping_the_process_ends_its_group` and `agent_chat::process::tests::stopping_the_agent_leaves_no_helpers_running`. * Extrude: picking a face, vertex or parallel plane off the profile switches the extent to To Object (#2855) * Extrude: picking a face, vertex or parallel plane off the profile turns the extent to To Object With profiles picked, a face off their plane (or curved), a vertex off it, or a construction plane parallel to it is taken as the To Object target instead of another profile: the extent switches without the Extent Type choice, and the distance shows how far the target is. Coplanar faces still join the profiles. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Extrude: automatic To Object is a Preferences setting, off by default Preferences > Design > "Extrude to a picked target" (`extrude_auto_to_object`, default false) turns the automatic To Object on. Off, picks in the Extrude dialog only add profiles and the distance is not synced to a target, as before this change. --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> * Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] * FreeCAD/Rhino import: decode caps with room for detailed parts (#1783) (#3209) * claim: #1783 * FreeCAD/Rhino import: decode caps with room for detailed parts (#1783) cadmpeg decoded FreeCAD and Rhino files under its service profile, whose million collection items and 2.56e8 work units a detailed part (a sprocket, a threaded rod, a part with a few hundred faces) runs past: the import was refused with "resource limit on CollectionItems: BudgetExceeded". Allow 8 million items and 2e9 work units, half of cadmpeg's desktop profile; the input-size cap stays SolidCraft's STEP limit and every other cap stays at the service profile's. decoding_is_capped checks the two raised caps (and that they stay below the desktop profile's) and that every other cap is still the service one. Fixes #1783 * A spherical shell revolves into a solid with a void, and cuts and joins with hollow tools work (#451) (#4182) * Assembly: ground the first part; drag free joint chains (#2804) (#2805) * assembly(feat): ground first parts and drag free joint chains Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR. Signed-off-by: Karl Von Richter<karl@embeint.com> * assembly(fix): update movable fixtures for first-part grounding Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests. Signed-off-by: Karl Von Richter<karl@embeint.com> * assembly(test): keep the motion-cost crank free Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure. Signed-off-by: Karl Von Richter<karl@embeint.com> * assembly(test): free the frame placement fixture Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main. Signed-off-by: Karl Von Richter<karl@embeint.com> --------- Signed-off-by: Karl Von Richter<karl@embeint.com> * UI: integrate theme radii, borders, palettes and viewport refresh (#5045) (#5046) * claim: #4922 * UI: let themes own corner radii * UI: use four-point panel and window radii in SolidCraft 95 * UI: align the 95 radius assertion with four-point panels * claim: #4953 * UI: let themes own structural and control borders * UI: single Blueprint outlines and dotted secondary rules * UI: separate container outlines and add theme-owned 95 bevels * claim: #5007 * UI: apply theme palettes to icons, workspace tabs and Gruvbox settings * claim: #5045 * Viewport: invalidate cached geometry colours when the theme palette changes * UI: preserve legacy theme logo colours with the borderless mark * Section Analysis: OK with no plane picked turns the section off (#2410) (#2411) While a section is on, Section Analysis opened with no plane picked now says "No plane picked: OK turns the section off." and OK runs inspect.section {"clear": true}. With no section on, OK with no plane still asks for a plane. Fixes #2410. * Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] * Close Change Parameters with Escape (#3372) (#3399) * claim: #3372 * Fix Escape cancellation in Change Parameters Consume Escape before parameter editors can commit pending text on focus loss, while preserving autocomplete and shortcut capture priority. Add 11 UI regressions covering draft cancellation, preview cleanup, document and history preservation, and reopening saved values. * Preserve construction references when axes and points are renamed (#4419) (#4449) * claim: #4419 * fix: preserve renamed construction references (#4419) * Browser: route body picks into open command dialogs (#2560) (#4371) * claim: #2560 * fix(ui): route Browser body picks into active dialogs * Fix midpoint picks in sketch dimensions (#4872) Retain MID snaps across both picks and materialize reusable midpoint constraints for point-to-line and point-to-point dimensions. Let midpoint pairs choose horizontal or vertical spans with pointer placement before entering a value. Cover projected model edges, overlapping geometry, helper reuse, undo/cancel/reopen, and existing angular and line-circle workflows. * Sketch slots: provide typed dimension inputs for every variant (#2423) (#4318) * claim: #2423 * fix(sketch): add typed dimensions to every slot tool (#2423) * Version 0.21.0 on main (released from rc.2's code) (#5774) Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * docs(mcp): Windows setup for Claude Desktop (#3794) * docs(mcp): Windows setup for Claude Desktop (paths, two servers, Store config file) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(mcp): say the Store build can keep the config elsewhere, not that the other path fails Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] * MCP: wait out long requests, honest batch outcomes, batch tool aliases (#2901) Rebased onto main as one commit (was 120d26f7, df488f9a, db9d1073 plus merges of main). - A request the app reports as still running (#1618) is waited for on the same connection through `control.pending`; past the wait the error says it was not cancelled and will still apply (or only write its file), later calls are not sent behind it, and the new read-only `pending` tool returns its result once it lands. - A failed batch says what really happened: `rolled_back` only when the design is back where the batch started (as #3288 / #3242 on main: the app's `rolled_back` is believed; for an older app, every completed step undone; only a rollback asked for is reported as one), plus `applied`, `not_run` and `failed.still_running`. - A batch step may name a tool (set_parameter, list_commands, describe_command, execute, measure, inspect_design, undo, redo, export, save, open, new_design, crash_reports); screenshot, body_topology, batch and pending are refused before anything is sent. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * 3D mouse: driver choice, guided calibration, button mapping and a picture of the device (#1463) (#3825) * Add a small test boat to steer around with the 3D mouse A little hull in its own camera, drawn by the UI itself and not the CAD viewport, so a 3D mouse can be tried out without opening a design. It brings the model (generated by assets/models/make_test_boat.py) and the tests for how the camera moves it. Nothing uses it yet; Preferences picks it up with the rest of the 3D mouse work. * UI kit: keep a choice row from flipping with the scrollbar A choice row picks segments or a dropdown by whether its labels fit. A page scrollbar that comes and goes narrows the row by its own width, so the row could flip back and forth between the two on a page that sits right at the edge. It is now judged on the whole row and through a small helper, fits_steadily, that only changes its answer once the miss is wider than the scrollbar. Also tests for that, for typed numbers in a slider's value box, and a test hook to put up the issue-report input barrier by hand. * 3D mouse: device model, guided calibration, buttons and a picture The 3D mouse becomes a device we know something about instead of six raw numbers. The reader picks between spacenavd and the direct hidraw driver, falls back from one to the other, and says so when it can't open the device. Guided calibration asks whether the device is a spring cap or a trackball, adds a touch step, and uses a settle filter so a ball let go of stops reading as motion. Buttons get jobs (keys, held modifiers, commands), saved per device, with defaults for the SpaceMouse Pro. Preferences gets a picture of the device that moves as it does, next to the test boat, and the same picture can sit in the 3D view at Left Viewport, Right Viewport or Left Window, above the floating History card like the legend and readouts. These ride together because the crate's calibration types, the Preferences page, the Linux reader and the button hook all use each other. * 3D mouse: offer to calibrate an uncalibrated device When a 3D mouse shows up that has not been calibrated, a card in the 3D view offers to calibrate it, to swap drivers when the other one would work better, to close, or to never ask again. It is made once per device, goes away after 30 seconds in view, and gives way to a status or computing toast instead of stacking on it. The card is the shared toast, which now takes buttons: they group by purpose, wrap inside the card at narrow widths, and do nothing while an issue report holds CAD input. The picture of the device in the 3D view keeps clear of the card. * 3D mouse: translations and attribution The 3D mouse strings (ui.3d_mouse_*, the calibration steps and the offer card) in every shipped language, the Japanese catalog note, and the credit for the test boat model in ATTRIBUTION.md. This is last because the code before it only looks keys up: it builds and runs without these, falling back to English until they land. * 3D mouse: draw its preferences with the settings kit like the rest of Navigation The 3D mouse section was a folded header with its own layout. It now uses the same kit as the sections above it: a settings_section card, settings_form rows with the shared label column, dividers between the device, axes, picture and buttons groups, Text::Hint for the helper lines, and settings_control_width for the dropdowns. The section is open like every other one (the header still folds it), so the device badge on the folded header is gone; the calibration row already names the device. Every setting, string and key is unchanged. Tests that unfolded the section no longer click it, and the hint lines are looked up as hints instead of notes. * 3D mouse: show each axis's live tilt in Preferences, like main's axis rows Each view axis row is main's axis row again: a meter that follows the tilt of the motion driving it, with the dead zone marked, next to Invert, Speed and the "driven by" menu. The meter reads the calibrated travel when the device has a calibration and the raw reading over full scale when it does not, and asks for a frame whenever the reading changes. The helpers are back as they are on main, and the calibration state is a badge by the enable toggle. * 3D mouse: line its preferences up with the rest of Navigation - The two checkboxes sit side by side in the same two-column grid as Wheel and trackpad. - Row labels stop repeating "3D mouse" and use sentence case: Calibration, Driver, Restore defaults, Reset view, Left viewport, Right viewport, Left window. - Hints line up under the control column instead of the left edge. - The six view axes are named Pan X, Pan Y, Zoom, Orbit X, Orbit Y and Roll so they fit the name column. - Buttons are a divider and rows in a form like the other groups, without the bold sub-heading. - The driver, dead zone, axes, picture and buttons sit behind a collapsed Advanced section, since most people never touch them. * 3D mouse: tidy the Advanced test for clippy * Timeline: suppressing a feature keeps later features' body names (#4302) (#4311) * claim: #4302 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Timeline: suppressing a feature keeps later features' body names (#4302) Bodies numbered by the counter (`BodyN`) take the next free number on every recompute, so suppressing a feature that made one moved every later counted body down one (`Body2` became `Body1`) and broke what named it, such as a Move of `Body2`. timeline.suppress now stores the current names of later features' counted bodies in their `body_names` first, as body.rename already does for a renamed counted body (#1109). Engine only: no evaluation or design-format change. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Timeline: a body made while a feature is suppressed keeps its name (#4302) Suppressing a feature freed its counted name (`Body1`), so a body made meanwhile took it and became `Body3` once the feature was back. Suppress now also stores the suppressed feature's own counted names, and the evaluator adds the names stored on earlier suppressed features to the state's `reserved_body_names` (the names a rename freed, #4957), which the `BodyN` counter passes by. They are taken from the design before each feature is computed and are part of the state digest, so a cached result is only reused when they match. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * cadmpeg 0.6.3: FreeCAD and Rhino import in the browser too (#4482) cadmpeg 0.6.3 is pure Rust (ruzstd instead of the zstd C library, zip 9), so solidcraft-io depends on it on every target and the wasm build reads .FCStd and .3dm files like the desktop app. The browser's file pickers offer them. 0.6.3 replaces DecodeOptions::container_only with a decode depth; ask for Geometry, what its STEP writer reads. zip 8 leaves the tree, and with it the three cargo-deny advisory exceptions kept for it. Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> * Pattern dialogs: Quantity fields get up/down step arrows (#4260) (#4264) A new kit control, `ui_kit::count_field` / `count_row`, is an expression field for a whole-number count with stacked step arrows at its right edge. An arrow steps the evaluated count by one within the field's limits: a plain number is replaced, an expression keeps its parameters and gains or adjusts a trailing `+ n`. The text changes as typing changes it, so the live preview follows. Used by the Quantity rows of the sketch Rectangular (1-500, both directions together at most 500) and Circular (2-500) patterns, and the solid Rectangular, Circular and Path patterns (1-1000). Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] * Join: say so when the joined piece doesn't touch the body (#4434) (#4436) * claim: #4434 * Join: say so when the joined piece doesn't touch the body (#4434) A Join (extrude, revolve, sweep, loft, pipe, coil, primitives, thicken, boundary fill, surface network) whose material meets none of its targets still joins it to the first target as a separate piece. The result stays as it was; the feature now warns: "the joined piece doesn't touch `Body1`, so `Body1` is now in 2 separate pieces (New Body makes it a body of its own)". History marks it and the command reply carries it. The check compares pieces (outer shells, not voids) of the bodies the feature changed or absorbed before and after it, so it holds for the batched multi-profile path too, stays quiet for a join that bridges pieces or closes a cavity, and leaves Combine (which joins the bodies it is given) alone. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Hole: snap to face and round-edge centres, drag placed holes, section in the dialog (#2171) (#2912) Placing a Single hole put it exactly where the click landed, with nothing to line it up by and no way to move it but taking it out and picking again; the dialog was a list of size fields. - Preferences › Design › Create Hole has two settings, both off by default, so a new installation places holes as before: - Snap to face and edge centres (`hole_snaps`): the planar face under the cursor offers its middle and the centres of its round edges (a boss, a rounded corner, a hole already there) as marks; a pick near one, or on or beside such an edge, takes that centre and the mark is named. Sketch points on the face still come first; Alt or Ctrl held places it where clicked. - Move holes by clicking or dragging (`hole_moves`): each placed hole has a handle that drags it (snapping when snaps are on) and takes it out when clicked, and a pick elsewhere on its face moves it there. Edit Feature shows the handle too, so a hole can be moved later (#1047). - The Hole dialog draws a section of the hole as its options make it, with each size in a field beside the dimension it sets; a hovered or focused field lights its dimension. The layout is a new kit element, `ui_kit::figure_rows` (a caller-painted figure beside captioned fields). Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * Hole: place a Single hole by distances from reference edges (#37) (#2931) A Single hole can take up to two straight edges of its face as references, each with the distance of the hole's centre from that edge's line, measured in the face's plane. `solid.hole` takes them as `references: [{edge, distance}]`; the edges are found again by their persistent names, else their points, so the hole follows them when the part changes, and each distance is a parameter. A bad reference (no edge there, a curved edge, one square to the face, parallel edges, a negative distance, a centre off the face) is refused. In the Hole dialog, Reference 1 and 2 follow the face, each with its Distance row; the canvas shows each distance as a dimension from its edge to the hole, with a box just past the edge to type it in. Picking an edge measures its distance (and its box takes the keyboard), typing one moves the hole, and moving the hole measures them again. Edit Feature picks the edges again with their distances. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> --------- Signed-off-by: Karl Von Richter<karl@embeint.com> Co-authored-by: Frank <58932224+plexi32@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: raykholo <raykholo@users.noreply.github.com> Co-authored-by: CamWight <91156642+CamWight@users.noreply.github.com> Co-authored-by: SS-EN <84559909+SS-EN@users.noreply.github.com> Co-authored-by: Colin Faulkingham <colin.faulkingham@gmail.com> Co-authored-by: Karl Von Richter <karl@von-richter.net> Co-authored-by: HiroKenEz <59478073+HiroKenEz@users.noreply.github.com> Co-authored-by: Peppe Bergqvist <p@bergqvi.st> Co-authored-by: GitHub Copilot <noreply@github.com> Co-authored-by: phanoob <lesur.Stephane@wanadoo.fr> Co-authored-by: Phanoob <phanoob@gmail.com> Co-authored-by: Kai Evans <nemshilov@gmail.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Tyler Chiriboga <tylerchiriboga.apps@gmail.com> Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com> Co-authored-by: CaRLymx <carlymx@gmail.com> Co-authored-by: carlymx <24634598+carlymx@users.noreply.github.com> Co-authored-by: Loohi <78334654+Loohi@users.noreply.github.com> Co-authored-by: leValdemar19 <valdemarnord@hotmail.com> Co-authored-by: AhmetV <mihendiz10@gmail.com> Co-authored-by: AhmetV <344941595+ahmetv10@users.noreply.github.com> Co-authored-by: rlartot <94693724+rlartot@users.noreply.github.com> Co-authored-by: Christian Svensson <blue@cmd.nu> Co-authored-by: Thodoris Tsagkogeorgas <thodoristsagko@gmail.com> Co-authored-by: ahmetalpcelik <80778880+ahmetalpcelik@users.noreply.github.com> Co-authored-by: ealitt <ealitt@gmail.com> Co-authored-by: Homero Thompson <vdirienzo@gmail.com> Co-authored-by: Diogo Soares Rodrigues <dsrodrigues20@gmail.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Artem Sushchev <Suschev.Artem+github@gmail.com> Co-authored-by: Nathan Dane <nathandane.dev@gmail.com> Co-authored-by: Kai Evans <hi@kaievans.co> Co-authored-by: Victor Santos Oliveira <56417388+Vittuu@users.noreply.github.com> Co-authored-by: cronos <crono2250@users.noreply.github.com> Co-authored-by: rbousigues88 <rbousigues@gmail.com> Co-authored-by: The Nomad <nomad@positron3d.com> Co-authored-by: Jackson Oursland <jacob.oursland@gmail.com> Co-authored-by: Jacques <59315319+Jacquesvdberg92@users.noreply.github.com> |
||
|
|
7a81a7fc15 |
library: transport PBR and engineering cards without lossy copies (#1086)
* wip(library): reconcile exact rich-catalog replacement semantics (#1062) Source-only scoped extraction from original 0f801962 / #1086 on the refreshed #1060 card prerequisite. Preserve current asynchronous picker guards and source-ID handles. Scalar v1 and rich-v2-without-PBR clear existing PBR; supplied rich PBR is retained. No new saved concept or duplicate card descriptor. Formatting and source review completed; compile/native acceptance is still pending. * test(library): preserve explicit downgrade and fallible UI regressions (#1062) Request scalar v1 explicitly in the card downgrade refusal regression; rich v2 remains the default lossless writer. Propagate fallible harness actions with ? in the shared clicked-catalog helper, preserving all assertions. No production code, limits or ignore changes. Fresh grouped IO/engine/UI tests, scoped strict Clippy and WASM pass on this exact tree. |
||
|
|
4b42ef50c7 |
Mesh leftovers from the ribbon redesign (#133) (#4471)
* claim: #133 * mesh: Save As Mesh declares the panel that shows it (#133) The ribbon redesign (#2176) removed the MESH tab, but three things still pointed at it: - `file.save_mesh` declared `.at("MESH", "MODIFY")`. The command inventory prints the placement a spec declares, so `docs/features.md` advertised a `MESH > MODIFY` location no ribbon has. Its real home is already INSERT / FILES (`SECTIONS` lists it), so the declaration now agrees with the ribbon; `destination()` resolved it there before and after, so nothing moves on screen. - The user guide sent people to "the Mesh tab under Modify" for Save as mesh. - A test now refuses any command that declares a tab the ribbon removed, and pins where Save As Mesh lives. `PLACEMENTS` keeps its MESH entries: those migrate toolbars users saved under the old panels, which is a different question from what a spec declares. --------- Co-authored-by: Geraldrunion <geraldrunion@users.noreply.github.com> |
||
|
|
2dc31a30d4 |
Extract to File: move a component into its own linked design (#5113)
The component's sketches, features, bodies, subcomponents, the joints among them and the parameters they use move to a new .solidcraft design, keeping their ids and names, and the component becomes linked to it as Insert Design makes it. The new design must build the same bodies and the assembly must look the same afterwards, else nothing changes and no file is written. Joint faces on the component are found again on the linked bodies, and components that build the same bodies can become placements of the link. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
63d81cc096 |
Motion Trace: regenerate kept curves only when inputs change (#5248) (#5270)
* claim: #5248 * feat(motion): regenerate kept traces when source inputs change * feat(motion): add a parametric Chebyshev trace demo * perf(joints): reuse face measurements across motion samples Face-centred joint origins called Body::faces on every solve, bypassing the reference-mesh reuse used for rigid placements. Share face measurements with unchanged model geometry at the existing tolerance, while guarding replaced bodies and applying offsets after the cached measurements. Cover repeated named/nearest-face solves, shape edits, retained snapshots and direct replacement with deterministic work counts. The 145-point Chebyshev dimension and range updates retain identical sampled and interpolated curves. * perf(naming): skip preparation for cached face names Both face lookup paths spawned fresh workers over every body even when their name cells were ready. Prepare only cold cells, with direct handling of zero or one cold body. Preserve the existing parallel naming path and all face selection semantics. Deterministic regressions cover repeated picked and unique-name lookups, misses, partial warmup, renames, snapshots and moved copies. Release Chebyshev medians fall from 859 to 50 ms for a dimension edit and 871 to 34 ms for a sweep edit; all 145 samples and interpolated points remain identical. Full cargo xtask ci passes with RUST_TEST_THREADS=4 and the existing local Windows validation overlays. |
||
|
|
92d3a2fde5 |
GPU: a lost device stops drawing instead of crashing (#4172) (#4229)
* claim: #4172 * GPU: a lost device stops drawing instead of crashing (#4172) After the driver resets the GPU (Windows TDR), the first queue write to meet the lost device panicked inside wgpu-core (PendingWrites::activate unwrapping DeviceError::Lost). Nothing watched the device for its loss. - egui-wgpu: RenderState::device_lost (DeviceLost) is set by the device's lost callback. The painter draws nothing on a lost device, and before a frame's uploads it submits nothing (DeviceLost::probe), so a loss the driver reports is found by that submission instead of the first write. - Pictures (thumbnails of saves, ui.render) watch the same flag: on a lost device the capturer refuses with GpuError::DeviceLost without touching it, and the picture comes from the CPU rasterizer. Headless capturers watch their own devices. - The app, seeing the loss, closes keeping unsaved changes for recovery (as a forced quit does) and starts again; the new start says what happened. A second loss within ten minutes starts on the software renderer. The loss is noted in the crash journal. |
||
|
|
4b23bb3a03 |
Implement compact workspace layout (#2029) (#4533)
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover * Vertical history strip: seam handle to expand and collapse names, drag to resize with snap * Vertical history strip: no empty gap below the transport * Show the history seam arrow only on hover (#2028) * claim: #2021 * Redesign the Assistant chat panel with shared UI components * Show Assistant in the shared floating panel shell * Extend floating Assistant to viewport height and shift navigation * Dock Assistant before history and match docking preview bounds * Align Assistant top margin with floating shell cards * Extract a shared panel drag grip * Rebuild responsive history sizing and three-way docking * Share browser and History collapse hover styling * Show the History title as soon as its text fits * Animate stacked browser and History expansion and collapse * Make panel folding responsive and independent of frame delays * Let folding panel contents shrink continuously to header height * Use four explicit History transport actions in every layout * Resize the shared Browser and History column from either card * claim: shared compact-mode containers (#2029) * Centralize layout-aware UI containers and enforce their use * Keep docked Assistant at the outer edge beside tool sheets * Use shared surface policy for Assistant tool space * Let tool sheets drag over shell panels while avoiding Assistant * Update Parameters drag bounds assertion for shell overlap * Keep dragged tool sheets below ribbon and workspace selector * Enforce universal UI containers in mandatory repository checks * Remove legacy report windows and require shared window composition * Remove retired UI styling and require shared controls * claim: compact layout preference (#2029) --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
920398ac53 |
Bring back the view-change glide; orbit, pan and zoom stay instant (#4596)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
dfd58293a6 |
Navigation: opt-in free orbit and shared Normal to Selection (#1912)
* Navigation: opt-in free orbit and shared Normal to Selection Preserve the complete reviewed feature, shared camera setting propagation, rigid pivot behavior and focus/drag regressions from PR #1912. Consolidate the prior main-integration commits before rebasing, so their merge-resolution fixes remain in the linear feature history. * docs: move free orbit help beside viewport controls * Merge main into fix/solidworks-free-orbit Camera animation is gone on main, and with it the orbit snap spring: the Shift snap keeps its unsnapped orbit in orbit_free, which the free-orbit checks now read. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
b289dc2421 |
Sketch Dimension: name = value defines a user parameter (#2916) (#3638)
* Sketch Dimension: `name = value` defines a user parameter (#2916) In a dimension's value (the D tool's box, and `sketch.dimension`'s `value` from scripts, the CLI, MCP and the control channel), `name = expression` adds the user parameter `name` with that expression and dimensions with `name`: typing `width = 40` on a line gives a 40 mm user parameter `width` and a dimension whose expression is `width`. A bare number is read in the design's unit, as a bare dimension value is; an angle's parameter is in degrees. The expression may be anything the parameter editor takes. It is one command: one undo removes the parameter and the dimension together, and a dimension the sketch refuses leaves no parameter behind. A taken name is refused with a hint (type the name to use it, or change it in Parameters), a reserved name with the parameter editor's message, and a left side that is not a name (`2 = 3`) still fails to parse as before. A driven dimension defines nothing. The reply carries `defined`, and the status line names the parameter. The splitter lives in the doc crate (`expr::definition`) so other value inputs can take the same form later; editing an existing dimension, the inline shape boxes and feature dialogs are follow-ups. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Sketch Dimension: say why a name is refused, in the command's own words (#2916) The dimension editor showed a refused definition raw, in the box and the status line: "invalid parameters for `sketch.dimension`: value: `mm` is a unit, constant or function name". It now reads "Sketch Dimension: `mm` is a unit name, so it cannot be a parameter name": the editor passes the command's errors through `friendly_error` like every other command, and drops the `value:` field tag, since the box is the value. The taken-name hint reads the same way: "Sketch Dimension: there is already a parameter `w`: type `w` to use it, or change it in Parameters". A reserved name says what kind of word it is and what that means (`param_name_problem`, shared with the Parameters dialog): a unit name, a function name, or a constant, "so it cannot be a parameter name"; `expr::reserved_kind` tells them apart. `friendly_error` translates the command label with the interface language (the engine's sentence stays English), so the prefix reads "Wymiar szkicu:" in Polish. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Sketch Dimension test: keep the third line off the ribbon (#2916) On current `main` the ribbon floats over the top of the canvas, and the test's third line at sketch y = 50 projected under it: the click opened Parameters instead of picking the line. The line now goes below the first one. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
84ec512d7a | fix: midpoint tool rejects two lines (#3836) | ||
|
|
63f210b49f |
Restyle the vertical history sidebar (#2028) (#3953)
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover * Vertical history strip: seam handle to expand and collapse names, drag to resize with snap * Vertical history strip: no empty gap below the transport * Show the history seam arrow only on hover (#2028) * Extract a shared panel drag grip * Rebuild responsive history sizing and three-way docking * Share browser and History collapse hover styling * Show the History title as soon as its text fits * Animate stacked browser and History expansion and collapse * Make panel folding responsive and independent of frame delays * Let folding panel contents shrink continuously to header height * Use four explicit History transport actions in every layout * Resize the shared Browser and History column from either card |
||
|
|
cb3cabeda1 |
Remove camera animation: every view change and orbit applies at once (#4296)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
164554edba |
3MF import: production extension review follow-ups (#2089) (#3628)
* claim: #2089 (3MF production extension: review follow-ups) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * 3MF import: production extension review follow-ups (#2089) Follow-ups from the review of #2127: - Only the root model's build is read; other parts' build sections are ignored as the spec asks (a slicer's child build pointing at a thumbnail no longer matters). - A model part that can't be read fails only the placements that need it; the package-wide caps (part names, 1 GB of model XML) still refuse the package. The root XML is dropped once parsed and each part is read against the remaining budget. - Loops are reported apart from depth, keyed by (part, object). - Messages name parts as written; objects are kept in id order so parts are read in the same order every run; %XX escapes in part names are decoded; the model unit is a local of the parser. - Tests: a component without p:path stays in its part (T1), the same id in two parts is no loop (T2), a slicer-shaped project (T3), the placement budget across parts (T4), a loop through three parts and a chain past the depth cap (T5), broken parts and child builds (T6), escaped names; the hostile-parts test asserts its messages; the mutation test also mutates the parts' XML and zips it again. - Guide: what slicer-only data is not read. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d9d6af51c6 |
Sheet metal: mirrored and copied sheet bodies stay sheet metal (#3353) (#3354)
* claim: #3353 * Sheet metal: mirrored and copied sheet bodies stay sheet metal Mirroring a sheet metal body into a new body gave a plain solid: the opposite-hand bracket had no flat pattern, DXF or bend table ("`Body1 (2)` is not a sheet metal body"). Copies from a body pattern or Move with copy lost their sheet model the same way. A copy now takes the sheet model with it (SheetBody::copied). A rigid copy moves the flat frame. A mirror moves the frame with its x axis turned round, so the thickness side stays, and mirrors everything in flat coordinates (x -> -x): base, flange bend lines (run from their far end, with their end extensions, slopes and tears swapped), panel shapes, cut-outs, pockets, bores, letters and base sketch lines. Arcs stay exact and loops keep their sense. A perforation field of a mirrored copy runs its grid from the right, so its holes are the mirror image too. The flat length, bends and K-factor are unchanged, and the copy takes further sheet metal features of its own. Mirror with combine is unchanged: the joined body has no single sheet model yet. Mirroring or patterning flange features is still refused. Sheet models are derived from the timeline, so no design format change. * Format: note the saved from_right of a mirrored sheet's perforation field The new `from_right` flag is saved in the design, so it gets a pending format note. No migration: a field without it runs from the left as before. |
||
|
|
6e87fb1a25 |
Ribbon: Parameters and Configurations back on Model, Sheet Metal and Sketch; Sheet Metal tab always reachable; Finish Sketch button back in the sketch palette (#3937)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
0379ee76c6 |
CI: spread the slowest tests across the test shards (#3646)
* CI: give the slowest tests a shard each Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CI: spread the slow tests on pull requests too, and keep both junit files Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CI: pull requests skip the goldens and the action matrix sample unless the kernel changes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Docs: which pull requests run the goldens Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CI: run the tests in one job on a big runner, slowest first Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CI: allow the 32 vCPU runner label in actionlint, read junit.xml in the golden hint Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
079a600481 |
Recovery: autosave every open design tab (#2884) (#2952)
* Fix recovery for unsaved background tabs (#2884) * Recovery: scheduled autosaves of every tab write on the worker thread (#2884) After #3139, Autosaver::save waits for the write and Autosaver::tick runs it on a worker. The scheduled path now goes through tick (which skips a tab whose previous write is still running), so several dirty tabs no longer write on the window thread each interval (#3044). save stays for Save, close and shutdown. Each tab's autosaver has no clock of its own: the shared cadence decides when it is due. The tests wait for the writes a tick started. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Recovery: closing a tab waits for its running autosave before removing the entry (#2884) With the autosave on a worker thread, discard could remove the files and the lock while a write was still running; the write then recreated the entry without a lock, and the next launch offered a design closed with Don't Save. discard now ends the running write first, as Drop does. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
41a62d210c | File menu: Export STL… and Export 3MF… open the mesh dialog with that format; command search finds mesh export by format (#3873) | ||
|
|
d45fcce72c | Command search popup on the UI kit; the bottom command line is gone | ||
|
|
f2eaead594 | Per-tab accent tokens: fill, ink and tint for every tab, with a contrast guard | ||
|
|
1122cd44b8 | UI library, tokens, fonts and icons (step 5 of #2016, after #2287) | ||
|
|
a0c1a67220 |
Application bar and ribbon redesign (step 1 of #2016) (#2176)
* ui: spacing, radius and type tokens, per-tab accents, agent and on-accent tokens * ui: per-tab accent behaviour and a larger application bar with a Start page button * icons: silhouette master and flat assistant and agent link icons (open for review) * icons: apply review notes (sparkle assistant, refined plug, silhouette halo) * icons: wire the silhouette master to inspect.silhouette; record the accepted icons * ui: application bar to the design: separators, Save, house, assistant icon, readable hovers * ui: ribbon structure: Model to View tabs, contextual Sketch and Sheet Metal, migrated pins * ui: ribbon painting to the compact design * ui: smaller icon button highlight and assistant mark on the bubble corner * ui: short ribbon labels that wrap at spaces * ui: ribbon buttons fit their labels and Finish Sketch shows its full name * ui: constraint gallery, workspace menu, section list headings and richer tooltips * ui: lighter selected tab label, ribbon surface and dimmer bar separators match the dark design * ui: document tabs as rounded chips with a dimmer inactive label * ui: document tabs fit their names and show close only when active or hovered * icons: close and plus masters for the document tabs (open for review) * ui: centre the new-tab plus and overflow button on the bar * ui: a quiet rule under the ribbon tabs on non-contextual tabs * ui: the application bar mark separates its faces with the bar colour, not white * ui: open ribbon section label uses the selected tint and a chevron * ui: dim the tab close and plus icons until hovered * ui: every ribbon dropdown uses the chevron, the workspace card included * ui: the active document tab uses the design's surface colour * ui: the bug button's right padding mirrors its icon side * ui: square constraint cells and a rule before the grid * ui: constraint cells back to their earlier size, keeping the rule * ui: smaller constraint cells and icons, centred in the section * ui: constraint cells fit the height of the large buttons' icon and label * ui: sketch Create titles share the other labels' line * ui: format the application bar and ribbon changes * ui: active tab surface token and the colour and hover tests that follow the redesign * tests: the merged parameter and narrow toolbar tests follow the compact ribbon * i18n: the Malay Gap label has an English source and its Japanese and Chinese translations * apply_off_thread tests: the evaluation lingers in tests, so still computing never depends on machine speed --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
b2168435ba |
Web: save to and open from files on your computer (#104) (#3681)
Save As and Open use the browser's file dialogs where the File System Access API exists; Save writes back to the same file, its handle kept in IndexedDB across reloads. File > Download design added. Other browsers keep storing designs in OPFS. |
||
|
|
fb87cde6a1 | Sketch: persist Shift-picked midpoints with ordinary constraints (#2087) (#2378) | ||
|
|
e29a57dc3a |
inspect.interference/clearance: list mesh bodies as unchecked (#3249) (#3258)
* claim: #3249 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * inspect.interference/clearance: list mesh bodies as unchecked Mesh bodies (STL, 3MF and OBJ imports) were filtered out before any pair was formed, so two overlapping STL imports reported count 0 and an empty unchecked list, which reads as "no collision". Each mesh body is now listed in `unchecked` as {a: name, b: null, reason: "mesh body: not checked"} by both commands. inspect.clearance also stops refusing a mesh body named in `bodies` or `against` as "no solid body"; it is listed instead. The parameter docs and the assemblies guide say so. Fixes #3249 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * docs: separate the mesh-body note from the paragraph above Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
76b17f2663 |
sketch(feat): a click on another dimension inserts its name into the value being edited (#3186)
While editing a dimension's value, a single click on another driving dimension now inserts its parameter name (a double-click no longer needed, and its second click does not insert it twice). A lone value such as `10` or `10 mm` is replaced by the name; an expression in progress keeps what was typed and gets the name at the cursor (replacing selected text), so `10 + ` becomes `10 + d10`. The cursor ends after the name and the field keeps the keyboard. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
fb811fbf21 |
Sketch trim: drag a path across curves to trim every piece it crosses (#3182)
`sketch.trim.path {points, dry_run?}` walks a polyline and, at each place it
crosses a curve trim may change, removes that piece exactly as `sketch.trim`
would there, in the order crossed and in one undo step. A piece already gone
is not trimmed again; projected geometry, infinite lines, offset outputs and
pieces trim refuses are passed over (reported in `skipped`). It returns each
trim's result and each removed piece as a polyline; `dry_run` reports them
without changing the design.
With Trim on, a press and drag in the viewport draws that path: the pieces it
would remove light up (a dry run of the command) and letting go runs it. A
click still trims the one piece under it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
876d57a67b |
Mouse gestures: ring of tools on the right button, per studio and customizable (#2934) (#2936)
* Mouse gestures: a ring of tools on the right button, per studio and customizable Preferences > Navigation gets a Mouse gestures switch and a Customize window (number of tools and their place, per studio). Gestures need the SolidWorks mouse mode and turn the right-drag orbit off. The ring is 280/350 pt, one zone per tool, alternating tints (three when the count is odd). The radial context menu is unchanged. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ * Mouse gestures: the ring opens on the right-button press; the right-click menus are off while gestures are on The ring opens at once on the press, even while a tool or dialog is active. While gestures are active the viewport's right-click context menu, the right-click that finishes a tool and the radial context menu no longer fire. With gestures off nothing changes. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ * Mouse gestures: the ring opens after 4 px with the right button held; a plain right-click keeps its menu The ring no longer opens on the press. It opens where the button went down once the pointer has moved 4 points with the button held, even while a tool is in progress. A right-click that does not move opens the usual context menu (or finishes the tool) again; the release that ends a gesture opens no menu. The radial menu stays off while gestures are active. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ * Re-trigger CI (the run was cancelled when approved-for-ci was added) Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
|
ca9ebb44db |
Sheet metal: refuse a flat pattern that no longer matches the body (#3324) (#3325)
* claim: #3324 * Sheet metal: refuse a flat pattern that no longer matches the body A feature that is not sheet metal can change a sheet body's material without its sheet model knowing: a mirror combined into it, an extrude joined onto it, a fillet or chamfer on a corner. The flat pattern, the DXF and the bend table then wrote the sheet as it was before, a part other than the one in the design, with no warning. The evaluator now notes, per sheet, the first such feature: one that changes the body's shape while its sheet model stays the same. That feature warns, and sheet.flat_pattern, sheet.export_dxf (also with per_body) and sheet.export_bend_table refuse with "not supported yet", naming it. A sheet metal feature, or machining the sheet keeps as cut-outs, rebuilds the body from the model: it clears the note and warns that the change is not kept. Moving the body, splitting its faces and cosmetic threads leave the flat pattern as it is. * Sheet metal: a modelled thread is refused in the flat pattern too Only a cosmetic thread leaves a sheet body's material as it is. A modelled thread cuts the thread profile into the hole, which the flat pattern does not have, and a later sheet metal feature dropped it without a word. It now marks the sheet like a fillet does: it warns, the flat pattern, DXF and bend table refuse naming it, and the feature that rebuilds the body says the thread is not kept. |
||
|
|
3855c4c7e2 |
Sheet metal: two corner reliefs that would overlap are both left out (#3421)
The two reliefs that would overlap are still resolved one after the other: the second one is left out, with a note. The corners come out in flange-index order, so which of the two keeps its relief depends on the order the flanges were made in. Two corners that share an edge never come this far: each relief reaches exactly r along that edge, and a relief is refused unless 2r fits in it. Two corners that do not share one can: the square relief at a corner of 120° reaches 2r from it along the bisector, so at the two 120° corners opposite each other in a rhombus the two reach each other. Two reliefs that would overlap are now left out together, each with a note naming the other, so that which of them is cut does not depend on the order the flanges were made in. Fixes #3417. Co-authored-by: jeremymiribung-blip <jeremymiribung-blip@users.noreply.github.com> Co-authored-by: Claude Code <noreply@anthropic.com> |
||
|
|
926a7353a3 | Sheet metal: possible to create flange on a flange (#3274) | ||
|
|
e27d43553c |
Sketch Dimension: line to circle/arc edge (#1803) (#1863)
A line and a circle or arc can now be dimensioned to the circle's edge (ConstraintKind::LineCircleDistance, saved as line_circle_distance): the gap while the line misses the circle (0 is tangency), or how far the edge reaches past the line when it cuts through (stored as `inside`). Rebased onto main as one commit (the branch's own changes; its merges of main dropped). Conflicts resolved: the test mod lines in cmd/sketch.rs (both kept, sorted), and README.md, whose feature list main moved to docs/capabilities.md; the line-to-circle dimension is listed there now. Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT Co-authored-by: jyviko <jyviko@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
fa3ada1983 |
claim: #2708 (#2739)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
2de99c728e |
Sheet metal: a corner relief no longer depends on the order the corners are cut in (#3280)
* Sheet metal: a corner relief no longer depends on the order the corners are cut in The corner reliefs are planned against the base as it is before any of them is cut, and the two reliefs at the ends of one edge are compared with each other. Before, every relief was cut into the base as it went, so the corner after it saw the relief of the corner before it: the square relief reaches further from its corner than the round one does (4 / cos(α / 2) against 4), so on a short edge it was left out where the round one was cut, and which of the two corners kept its relief depended on the order the flanges were made in. The reliefs themselves are unchanged: a round about the corner through the angle the base fills there, or the square with that side (a kite where the corner is not square, its cuts square to the two edges). What is new is that they are planned first and cut together, so that a corner's relief depends on the base and on the other reliefs, and not on the order they are cut in. Two reliefs that would overlap are still refused, now with a note that says so. Covered: the four relief shapes at corners of 60° and 120°, with the flanges of equal and of unequal height, through the kernel and through the engine (where the flat pattern and the DXF keep one clean loop). Co-Authored-By: Claude Code <noreply@anthropic.com> * Sheet metal: cover the corner reliefs at a corner that is not square The engine and the UI had no test at all for a base whose corners are 60° and 120°: the flat pattern, the DXF, the unfold and the rule manager's own square relief were all untested there. They work; this says so. Co-Authored-By: Claude Code <noreply@anthropic.com> * Sheet metal: say what happens when a corner relief is left out The guide now says that the reliefs at the corners of one edge are cut together, and that two of them that would overlap leave the second one out. A relief that cannot be cut is reported, not dropped. Co-Authored-By: Claude Code <noreply@anthropic.com> * Sheet metal: write the corner relief's expected corners out The engine test hard-coded the corners of the trimmed base; it works them out instead, and the numbers the test and the sketch share are written with the precision they need. Co-Authored-By: Claude Code <noreply@anthropic.com> --------- Co-authored-by: jeremymiribung-blip <jeremymiribung-blip@users.noreply.github.com> Co-authored-by: Claude Code <noreply@anthropic.com> |
||
|
|
9c954b46ed |
Trademark notice: name every CAD vendor and product we mention, not only Autodesk (#3294)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
98c30d28f9 |
Joints: a replaced motion link keeps the driven joint where it is; links count in dof (#2898)
Thanks @SS-EN. |
||
|
|
4d99d79205 |
README: shorter front page; details move to docs (#3275)
* README: shorter front page; details move to docs * Downloads page: drop stray lines |
||
|
|
a6b44ab0d3 |
Profiles and cap attachments fall back to the best match when a sketch outline changes (#2897)
Thanks @SS-EN. |
||
|
|
26f42ae09b |
Snapshot: draw a see-through appearance see-through, and show a tool body inside its target (#2329) (#2330)
* Snapshot: draw a see-through appearance see-through, and give the CLI --body, --tool and --section A headless picture dropped a body's opacity: the scene carried only a colour, so a design with a translucent appearance was drawn opaque by `solidcraft-cli snapshot`, by MCP screenshots and in a design's thumbnail, although the window has always drawn it as glass. There was then no way to look at the body a cut would remove inside the material it meets: only a volume to measure and reason about, which hides exactly the errors a picture makes obvious (a tool that stops short, or lands in the wrong place). - `SceneMesh` carries the body's opacity; `view::build_scene` takes it from the design (`model_body_opacity`), and a selected body stays solid so the selection colour reads. - The GPU capture routes a see-through body into the scene's glass at its own alpha, as the viewport does; the CPU rasterizer draws the solid bodies first (they own the depth buffer), then the see-through ones blended over them, far sides before near sides and without writing depth, so what lies inside shows and a line between the two is not hidden. - `snapshot --body NAME:opacity=0.3,color=#rrggbb`, `--tool NAME` (that body solid in the tool colour, the rest see-through) and `--section z=27` run the commands the app itself runs (`appearance.assign`, `inspect.section`): the options are shortcuts, not a second renderer. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * Tests: measure the tool colour as it is drawn through a see-through target The tool-colour filter was derived on paper and demanded a red more than twice either other channel, which the target in front of it tints away (measured: (200, 108, 85) through opacity 0.3); and the colour check painted the tool, which a solid target hides. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fmt * Snapshot options: strip the colour's # rather than slicing it; README Slicing `value[1..]` on an input-derived string is what the house rules ask us not to write, even where a length check has already made it safe. The error a failed assignment reports now names the body rather than claiming it came from --body, since --tool reaches it too. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * --tool: assign the bodies around the tool in groups, not one command at a time Each appearance.assign is an undo step with a document snapshot behind it, so one per body made --tool cost grow with the size of the design for no reason: the bodies around the tool all get the same opacity, and the ones that share a colour can be named in one call. A design whose bodies all wear the default grey now costs two commands whatever its size. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * Rasterizer: say where its glass and the GPU's differ Splitting each see-through body by facing orders its own two layers; it does not sort across bodies, which the GPU does. Worth stating rather than leaving a reader to find it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
b0b59480eb |
Joints: relations that tie part of a placement (#2497)
Joints can tie part of a placement: parallel, angle, point on plane and more (#2496). |
||
|
|
473f1e6516 |
Sheet metal: readable face names from the sheet itself (#2275)
Sheet metal faces get readable names (#2272). |
||
|
|
539c17b425 |
Joint sweep: drive a joint until parts touch, and report where (#1981)
Joint sweeps can stop where parts touch and report the contact and remaining room. |
||
|
|
99d8d382b9 |
Bill of materials: part properties on components and assembly.bom (#1888) (#1899)
* Bill of materials: part properties on components and assembly.bom A component definition now carries part properties (part number, description, revision, other tools' keys) and free text properties, saved with the component and shared by its occurrences. component.metadata and component.metadata.set read and change them in one undo step; Paste New copies them; parts.insert numbers standard parts from their standard and size, and parts.resize renumbers them. assembly.bom counts the placed components (flat: parts at any depth through their subassemblies; top: direct children), grouped by part number or by definition, sorted by part number, and writes CSV (fixed, quoted columns) or JSON. The app gets a Bill of Materials window on the INSPECT panel that lists, edits and exports the rows. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> * Bill of materials: name a merged row's equal definitions once Two standard parts with the same size are separate definitions with the same name; their row now reads "SHCS M6x20" instead of repeating it. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> * Window widths test: close the Bill of Materials window between commands The test closes the floating windows a command opens before starting the next one; the Bill of Materials window was left open and measured against the next dialogs' limits. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> * Bill of materials: sub-parts in their part's row, and part properties without re-evaluating assembly.bom takes group_children: true. A part with a part number keeps what is placed inside it (a bolt's washer and nut) in its own row, listed under it as children (items 1.1, 1.2, with each and count) instead of rows of their own; bolts with different contents stay different rows, and total_occurrences is the same either way. The window has a switch for it and shows the children under their part; the CSV lists them after their row. Changing part properties re-evaluated the model, re-seated every joint and rebuilt the placed model: 361 ms per change with 30 jointed bolts. A change that only touches components' metadata and properties now takes the same path as a render-only change (proved on the whole Document), also for its undo and redo: 0.6 ms. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> * Bill of materials: look the structure up once, not per subassembly Deciding whether a subassembly is a part (it has bodies of its own) scanned every body of the model for each subassembly, and each body looked up its feature by a linear search of the timeline: subassemblies × bodies × features. assembly.bom now indexes the placements, the body owners (Document::body_owners: one pass over the bodies with the timeline in a map, the same rule as model_body_component) and the numbered components once per call. 600 bodies and features with 60 subassemblies: 8.1 ms → 1.3 ms; the old cost grows with the cube of the design's size. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
d8d04c9009 |
Tool modifiers: shared resolve, classic defaults, preview-safe Ctrl (#1616)
* Centralise tool modifiers with classic defaults and preview-safe Ctrl. Route sketch/selection chords through a shared resolver. Keep Alt snap suppress and dual toggle as defaults; optional Shift add-only and Ctrl snap mapping. Skip preview rollback while a manipulator drag is active. * Address #1616 review: classic snap suppress, single viewport owner, docs. Default suppress to Ctrl/Cmd or Alt; drop navigation set_suppressed; remove unused label_key; add preview rollback gate test; document sketch modifiers. * fix(#1616): correct Modifiers primary in tests; simplify rollback fixture. * Treat Ctrl as primary off macOS, and rustfmt the modifier files. |
||
|
|
771f62be71 |
Interference: clear apart pairs from their meshes, intersect the rest in parallel, time budget (#2895)
Thanks @SS-EN. |
||
|
|
aee47fca00 |
Messages window: keep status messages to read and copy again (#2763) (#2764)
Status messages are kept for the session in a Messages window (Help menu, or click the status chip), newest first, with Copy all. |
||
|
|
aaa35a94d8 |
Relink a linked assembly source from the Browser (#2772) (#2773)
Thanks @amolinari-autotex. |
||
|
|
768e69c4c7 |
Joints: a new joint between faces that already meet leaves the part as it is (#2709) (#2710)
Thanks @NOWN-DEV. |
||
|
|
c66e33284b |
Joints: offsets, angles and values typed as expressions follow their parameters (#2385) (#2386)
Thanks @NOWN-DEV. |