Commit Graph
2945 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 b75d176673 kernel: a round that would cut through its wall into a hollow is refused
The owner's rule of 2026-10-30: a round running past a rim of its faces
into open air builds; one whose section would remove material through to
a hollow behind its edge (a slit into the hollow, a cut through the part)
is refused as too large, so the fillet names the largest radius that fits.

Decided exactly in the section of a straight convex edge between planar
faces: the round's centre is at depth r below both planes, and it opens
where its arc uncovers a boundary point strictly inside the wedge with no
material beyond it toward the centre (the body's exact point
classification). Looked at: straight edges parallel to the round's (a
hollow's corner), cylinders about parallel axes (a rounded corner), and a
picked concave parallel edge's own round, which fills the corner.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 22:19:55 -04:00
jyvikoandClaude Opus 5.5 c19500fceb Fillet: the radius-too-large choice in plain nouns
"If too large: Stop and say so / Largest that fits / Narrow where needed"
becomes "Face limits: Exact radius / Largest radius / Narrowed radius", in
every language of the catalog, with the error and the tip that name them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 22:19:51 -04:00
jyvikoandClaude Opus 5.5 2fab949916 kernel: blend_smlib laid out by the 2024 edition's rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 571d711c8f kernel: the re-blend's removed picks formatted as rustfmt lays them out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 baf51b2714 kernel tests: the rim chamfers running off their rims build, on SMLib 737c392
chamfer_wider_than_sloped_basin_rim_builds and a_rim_loop_chamfer_running_off_its_rim_builds
waited for SMLib to build the cliff overflow (CloseRemovalRegion refused it,
SM_FILERR_NO_ROOM). The pinned SMLib builds it (eddf0ede4, bba9914b6): both pass on aarch64
Linux and are no longer ignored.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 a85d22e608 kernel: Body::contains, the mesh test, is gone
Every caller asks Body::classify_point now.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 7ca072ec61 ui, cli tests: probes ask for the exact point class
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 cdff4ac7c6 engine tests: probes ask for the exact point class
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 3b88f1acc5 doc: a hole decides whether it exits at its drill point's shoulder exactly
Material past the depth needs a body with the point inside, air before it needs every body to
have it outside; a point within a body's tolerance of the exit face is neither.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 7b3e66cbae kernel: Body::classify_point decides inside, outside or on the boundary exactly
SMLib's point classification at the body's own tolerance, on the exact faces and edges, in
place of a mesh at a chord of 2e-3 of the body's size (about 0.4 mm on a 200 mm part). A point
within the tolerance of a face, edge or vertex is OnBoundary, never decided by a ray. A mesh
body's triangles are its exact shape: on them within the record's tolerance, else by ray
crossings. The kernel's own probes move to it; Body::contains goes once its last callers have.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 56d39a5764 smlib: Brep::classify_point says exactly where a point lies against a body
Binds the fork's smlib_brep_classify_point (SmBrep::Point3DClassify at the body's own zone
tolerance): inside, outside, or on the boundary within that tolerance of a face, an edge or a
vertex. A box and a cylinder just off its curved wall in measure's tests.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 58e0d8346e Tests: a 15° tapered text builds, every letter grown, exact where its outline gives it
Owner ruling d6: the letter t of "tres long" was drafted inward by SMLib (its
loop's normal, summed from the cross products of its chords, pointed down;
fixed in SMLib). With the fix every letter grows, and the join builds at 3°
and 15° by the Round rule and by the default rule (tangent for spline
outlines), where before 15° was expected to be refused.

Exact where the outline derives it: a letter's section at height z is its
outline offset by e = z tan a, by the Round rule of area A + P e + C e² while
the offset trims nothing (Steiner; C half each loop's turning less
tan(t/2) - t/2 at each reflex corner), so the letter is
A h + P k h²/2 + C k² h³/3. Each extruded alone, the t at 3° and s, l and o
at 3° and 15° are checked to 1e-6 (SMLib measures them within 1.3e-9; its
mass properties integrate to 1e-8). The concave joins of r, n, g and e are
tighter than e already at 3° (their swallowtails trimmed: r 1.1e-3 under the
formula), the t's by 15° (9.9e-5 over), and on the block the letters grow
into each other, so the whole word is checked for what holds exactly: one
closed body with the block, and half-way up every point of each straight
letter's outline inside the solid (the t drafted inward failed that).

With SMLib's fix (smlib-batch-4-text-loops 82133b2).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 3772a6e972 kernel, doc: an overflowing round goes first; an edge it removes is gone, and the fillet says so
SMLib (smlib-batch-4-rulings 0e83cca, SMLIB_ABI_VERSION 5) rounds the edges whose rounds overflow
their faces first and then what is left of the others; smlib_blend_dropping says which picks'
edges the overflow removed whole. The smlib crate binds it (Brep::blend_dropping), the kernel
returns those picks (fillet_removing), and a fillet notes them as its warning: "the edge at
(0, 0, 10) was removed by the larger round, so it is not rounded" (a 50 x 50 x 20 block, R21 on
its bottom front edge with the front left upright: the block is R21's alone, in closed form).

Ruling d8: [21, 5, 5] on a 20 cube builds as R21 alone (6107.529370); the test is no longer
ignored. R25 with R2 at a corner (blend_corner) builds the same way, R25's alone in closed form,
where it was refused. The rig's 1080 notched block outline at R8 builds now and comes off the
known-failing list.

Needs SMLIB_REV at that SMLib once it is pushed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 6f0bf0dea5 Tests: a 1 degree crease rounds, and the knife edge's chamfers build, on SMLib smlib-batch-4-rulings
With SMLib's smooth limit at half a degree (422e6f1) the 1 degree crease rounds R2 and R20
(the test is no longer ignored), and with a cusp's chamfer the ball of radius d (d231547) the
The 0.5 one stays, for its own cause (the chamfer face left apart from the body). Two corner
cases the same SMLib (replay/1.0.1 and those commits) builds come off too.

Needs SMLIB_REV at that SMLib once it is pushed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 6f7172dc8a kernel tests: a corner round wider than its faces overflows and takes the corner's other edges
R21 on a 20 mm cube's edge builds (6107.529370, closed form, to 2e-12). With R5 on the
corner's other edges the R21 takes the faces they lie on, so the body is R21's alone; SMLib
fails that blend (status 1001, fillet error 4, Unable to Trim Rail Curve) and the test is
ignored until it builds. It replaces the refusal test that expected TooLarge.

Ruling d8 (2026-10-30).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 4f64a035ab kernel: one smooth angle, and a round too small to change the part is refused
The blend's tangent angle is the shaded view's half degree (smooth_edges::ANGLE), one value
for smooth. A constant round lies r (sec(d/2) - 1) inside the crease it replaces (about
r d^2/8); below the edge's tolerance it changes nothing and is refused before SMLib (which
answered SM_ERR_INVALID_INPUT), naming the smallest radius that rounds,
tolerance / (sec(d/2) - 1). d is the least turn along the edge
(tangent_edge::least_angle_along, at tangent_all_along's stations).

Ruling d3 (2026-10-30). The block's tolerance is 2e-5 mm, not 0.1 um: at 1 deg the smallest
radius is 0.526 mm, so R2 and R20 reach SMLib, which still calls an edge within 2 deg smooth
(SmEdge::GetBlendEdgeuse); that test is ignored until SMLib uses 0.5 deg.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 04955683f8 Tests: a strip's tangent and curvature run-offs are the distance long across the surface
SMLib measures an extension's distance across the surface (smlib_extend_sheet corrects
CreateExtendedSurface until the parameter line through the side's middle is that long), so each
run-off of the cylinder strip, swept 20 along z, adds 5 x 20: 10 pi/2 20 + 100 = 414.159 for
both. The parabola-length formula (418.18) was truck's.

Ruling d2 (2026-10-30).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 abe571b277 SMLib: pin eaa998a (tangency-labs/smlib#68, #69, #70)
Batch 4: drafts and loops, mitre corners, rim chamfers, rulings, tight box, stitch, point
classification, eased corners. Batch 5: a face's tight box divides its cells at the surface's
knots (thread boxes exact); a cylinder, cone, sphere or torus is extended along its own circles.
Batch 6: a revolution's extension closes its turn; a dropped point's foot is the converged one.
The C API is ABI 5 (smlib_blend_dropping and smlib_brep_classify_point are new; nothing existing
changed), so the binding expects 5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 21:55:53 -04:00
jyvikoandClaude Opus 5.5 456e5b7fa5 Tests: the io crate's hand-built saved models list their rounds, as format 7 records do
Model cache format 7 (f3cf0c4f3) records a `rounds` list in every saved model, and reading one
without it is refused ("saved model: rounds"), as is a model without any of its other lists:
the states, the preview and the thinned model all came back empty. The io tests' saved_model
and timeline_model wrote format-6 records, so six tests (the round trip, the repeated part
stored once, and the four too-big-for-the-file cases) read nothing. Their bodies are none made
by rounds: the list is empty, and every expectation stays as it was.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 20:07:43 -04:00
jyvikoandClaude Opus 5.5 134a34f895 Tests: a corner patch of rounds 2/3/4 takes no more than the strips leave in its block
three_rounds_at_a_corner bounded the patch's extra cut at 3 mm³ beyond the strips, a figure
with no derivation; SMLib's all-at-once body at radii 2, 3, 4 takes 3.099 (V 7878.579574
against strips 7881.678). That body is the strips' outside the block its patch lies in: its
rounds are the strips' cylinders ending at a's section y = rc, b's x = 20 − rc and c's rails
where they meet a's and b's (the patch's four corners, now asserted), so the patch takes at
most what the strips leave in that block (11.86 at 2/2/3, 32.69 at 2/3/4). The lower bound is
that block; the upper one, at most the strips' volume, stays.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 19:19:30 -04:00
jyvikoandClaude Opus 5.5 f3cf0c4f37 Model cache: a body made by rounds keeps them, so a later round blends them the same after opening
A design gave another body when opened from its model cache: the rounds a body was made of
lived only in memory, so a later round at their mitre was built sequentially (or refused, as
too large) after opening and blended with them when evaluated anew. The saved model now
records, per kernel body made by rounds, the body they were made on (a place in the bodies,
stored once though no state holds it) and the edges with their radii; reading it attaches
them back down each chain, and a thinned model keeps those bodies with the bodies made from
them. Model cache format 7.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 19:19:30 -04:00
jyvikoandClaude Opus 5.5 9760feed48 Kernel: a body's record of rounds goes with its history, and can be read back
The rounds that made a body are over the body its history is over: a new history (an
operation carrying a step's result back to its own operands) leaves the record out, so a
later round never reads one history against another body. Body::rounds gives the record and
Body::with_rounds_of takes one back, checked (edges of the body before them, a fillet's
radii, the body's history over that body), for a saved model to keep it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 19:19:30 -04:00
jyvikoandClaude Opus 5.5 5d1b18f405 Tests: a later r3 round at an r2 mitre, through the Fillet feature, makes the all-at-once corner
Two box edges rounded r2 in one fillet, then the upright edge at their mitre r3 in a second
fillet (tangent chain on, so the seam comes with it): 10 faces, 7928.743041 mm³ as
fillet_radii of the box gives, the r2 rounds' names kept, the r3 round and the corner patch
the second fillet's.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 19:19:30 -04:00
jyvikoandClaude Opus 5.5 3e5b358afd Fillets: a later round at a corner where earlier rounds meet blends them again with it
The owner's ruling of 2026-10-30: a later fillet on an edge at a vertex where earlier
rounds already meet in a mitre makes the corner rounding all of them at once makes, one
smooth patch, the mitre gone. A body made by constant-radius rounds keeps what they were
made on and which edges they rounded at which radius; a later round reaching such a corner
blends the earlier rounds' edges (from the earliest of those meeting there on) with the new
edges in one SMLib blend of the body before them. The result's history is put over the body
the later round was given: an earlier round's face is that face trimmed anew (its name
kept), the corner patch and the new rounds are the later fillet's. A picked mitre seam has
no round of its own: it is refused unless a new edge of its radius meets it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 19:19:30 -04:00
jyvikoandClaude Opus 5.5 6d8e002f86 UI: rim and wall picking tests for a circle of arcs that is one wall
A circle drawn as two half arcs now extrudes to one full-turn wall with its
seam edge, and each rim is one closed edge (tangency-labs/smlib#67). The tests
keep their intent on that body: a rim clicked once is one item, measured and
highlighted whole and picked from either side; a wall picked either side of
its seam is the same surface, lit whole, and toggles off from the other side;
every face is its own patch.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 17:09:44 -04:00
jyvikoandClaude Opus 5.5 8ed4663ae8 Mesh convert: a reconstructed bore is one wall, so the bracket has 9 faces
The L's six sides, its two caps and the bore: since tangency-labs/smlib#67 the
full circle the conversion fits extrudes to one full-turn wall, not two halves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 17:09:44 -04:00
jyvikoandClaude Opus 5.5 2c19013710 kernel: the record test takes the one wall a circle of arcs extrudes to
Since tangency-labs/smlib#67 an extruded profile's arcs on one circle sweep one
full-turn wall face, made from all of them (Profile 4, 5 and 6 here), where it
was a face per arc. The geometric check of the record finds a face over several
segments by its triangles' centres and vertices on them; the revolved arcs keep
a face each.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 17:09:44 -04:00
jyvikoandClaude Opus 5.5 a71450aebd Preferences: symmetric surface extrudes read only the total distance
The Design preference surface_extrude_symmetric_per_side, which gave new
symmetric surface extrudes their distance on each side, is removed with
its Surfaces section, its session field and its labels. A symmetric
surface.extrude given no convention splits the total around the start
plane, as solid.extrude does; timeline.edit and timeline.redefine give a
one-sided extrude made symmetric the same. default_extrude_convention,
which only existed to read the preference, goes too.

An explicit `convention: legacy_per_side` and the marker saved designs
carry are unchanged. A saved preferences file that carries the key loads
as before (the prefs test now covers both removed keys).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 16:19:33 -04:00
jyvikoandClaude Opus 5.5 2ae53d387f Preferences: metric tapped holes drill only the tap maker's drill
The Design preference metric_tap_drill_major_less_pitch, which gave new
metric tapped holes the major diameter less the pitch (M8: 6.75 mm), is
removed with its Holes section, its session field and its labels. A new
tapped hole given no diameter drills the tap maker's drill (M8: 6.8 mm);
a custom metric size the table lacks still takes the major less the pitch.
A saved preferences file that carries the key loads as before: serde
ignores keys Prefs doesn't have, and the key is not written back.

The preference's UI test becomes an engine test of the default drill
(M8, 1/4-20 UNC, a given diameter) and a prefs test that a saved file
with the removed key still loads.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 16:19:33 -04:00
jyvikoandClaude Opus 5.5 222211de43 Model cache: a thinned model keeps the check mode only as the model records it
SavedModel::thinned wrote `"validation": null` into the records of a model
that records no check mode, so a thinned model was never the model it came
from, even with room for every state, and its manifest grew by that key
(design::tests::a_thinned_model_keeps_the_final_state_then_the_slowest_that_fit,
a_model_cache_too_big_for_the_file_keeps_fewer_states). It copies the mode
when there is one and adds nothing otherwise; the tests' timeline model records
one, as every saved model does now, and a thinned model is asserted to keep it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 16:19:28 -04:00
jyvikoandClaude Opus 5.5 6700e6ef1f kernel: a body SMLib keeps in the record's order is mapped, whatever order its export lists
An imported solid's faces were mapped to the file's only when SMLib's export numbered them as the
record did (native.rs, numbering). The export is in canonical order, which can list edges
otherwise: the two periodic-knot tubes of #1374 came back with their seam and rim edges listed
[2, 0, 1, 5, 3, 4], so the sheet, a valid B-rep, was refused as "SMLib renumbered the solid's
faces". The export's order says where SMLib's own face and edge i went; put back in SMLib's
order it numbers them as the record does, and SMLib's i is the record's i (an import lists them in
the record's order). numbering now takes that too, checked the same way; an edge split into
pieces is no renumbering and stays unmapped.

The tube test asserts what it should: one surface body, not a mesh, its faces the file's two
faces in order, every face meshed, in under a minute, and the area exact: each face is the file's
quadratic circle (corner weights sqrt(2)/2 to 12 digits) moved straight along its axis, a
cylinder's side, so 2 * 2 pi r h, which SMLib's measure meets to 1e-6.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 15:19:38 -04:00
jyvikoandClaude Opus 5.5 393c83c2a3 STEP import: a solid the kernel refuses, its faces too, is refused with the reason, never a mesh
A solid SMLib refused came in as a surface body of its faces; where SMLib could not stitch those
either, the importer meshed them with SolidCraft's planner and kept the triangles as a mesh body
(step_in/parallel.rs, mesh_part). A build without SMLib showed it: every STEP part of the import
rig came in as a mesh of its faces. That fallback is gone: the solid is not imported, and its
warning names it and gives the kernel's reason ("solid 'Cube': not imported: ..."); a file whose
every solid is refused fails with the same words.

The import report tells a part the kernel refuses (Refused) from one the reader cannot read
(NotImported), and its summary says "N parts couldn't be made into solids and were not
imported" in place of the mesh sentence (en, ar, de, he, ja, ko, zh). STL, 3MF, OBJ and glTF
still come in as mesh bodies: that is what those files are.

The two-tube sheet of #1374 had come in only through that fallback: SMLib's export lists its
edges in another order, which the next commit maps. Until then its test asserts the refusal and
meshes the faces as read at the body's coarse display tolerance, the regression it guards.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 15:19:38 -04:00
jyvikoandClaude Opus 5.5 709765fcae Model cache: a saved model records its body check mode and is adopted under it
Since the body check mode became part of the evaluation context (9acbcf924),
evaluate digests the context with the mode, but Model::adopt still took the
context without it and the default mode: the first evaluation after opening a
design from its saved model saw another context and recomputed every feature
(undoing_an_edit_after_opening_reuses_the_saved_results,
rolling_the_marker_back_keeps_results_after_cache_eviction). The saved model
now records the mode it was evaluated under (thinned ones too), adopt takes
it and digests the context as evaluate does, and a session opening a design
under another mode evaluates it again rather than showing that mode's results.
Model cache format 6.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 15:19:33 -04:00
jyvikoandClaude Opus 5.5 45823002c0 SMLib: pin 68fb916 (tangency-labs/smlib#67)
The owner's bar running tangent into a cylinder rounds its concave arc and
its top edge both together and one after the other in either order, at
r 1 to 7. Two more peg cases come off the fillets known-failing list.

The ladder's shelled dome ring now has 9 edges, not 7: each of its two
cylinder walls is one full-turn face with its seam edge (one wall face per
extruded circle), where it was two halves. Faces, vertices, area and volume
are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
2026-10-30 15:19:29 -04:00
jyvikoandClaude Opus 5.5 d3766865a0 Tests: old designs open and evaluate; what they rebuild to is today's
Tests that asserted an older design rebuilds as the build that saved it made it
now assert what still holds: it opens, is upgraded, evaluates, round trips and
names alike every time, and a feature that lost a reference asks for it again.

- naming corpus: two builds still name every face and edge alike and find the
  same faces with their stored names; a stored name that finds nothing must
  leave its feature failed (it asks to reselect), never a feature that builds.
  A sketch's face is found by its name as the sketch finds it.
- design corpus: the volumes, areas and bounds the saving builds recorded are
  no longer compared; a corpus design may fail only by a request to reselect,
  and undo leaves the features that failed on opening failed.
- fixed robustness seeds: no panic, valid bodies and volumes moving the right
  way; a step the kernel refuses is not a bug.
- a format 28 design's pieces and a format 13 design's extra bodies: marked as
  they open and named alike, without promising the numbers or names saved.
- action matrix baseline: the two corpus designs whose fillets, chamfer and
  offset face held names saved before format 14 re-recorded.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:31:23 -04:00
jyvikoandClaude Opus 5.5 ef37bd4459 doc: names saved before format 14 find nothing; their features ask to reselect
Face and edge names stored before format 14 were worked out from geometry and
open marked `?`. They were found among the names geometry gives today, as the
builds that saved them found them, pieces by the one nearest the pick. They
find nothing now: the feature holding one fails, asking for its reference to be
picked again, which stores its exact name. The legacy face and edge names a
body worked out for them are gone.

The tests that found such names as saved now assert the request to reselect:
a saved strip projection, a version 9 emboss on an annulus, a format 10 face
sketch and the corpus design named with numbered pieces.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:31:23 -04:00
jyvikoandClaude Opus 5.5 cfa6f38d6e doc, engine: a stored name finds its very face or edge, or its feature asks to reselect it
A face or edge name a feature stored finds only the face or edge it names: the
very name (or a synonym of that face), or the named piece told apart by the
faces around it. A face split into several pieces, merged into another face,
or left only as a face of the same stem is not the face that was picked, and a
name found on several bodies is told apart only by the body the reference's
point lies on. The fallbacks are gone: no piece nearest the pick, no merged
face, no edge at the picked point, no lost link that keeps its last geometry.
A feature whose stored reference finds nothing fails with DocError::Reselect:
blends, face points, sketch planes, sketch projection links, construction
references, hole reference edges, sheet bend edges and cylinder emboss.

The tests that asserted a fallback now assert the request to reselect: split
and removed fillet edges, a merged or rejoined face, a projected edge that was
split or is gone, a projection whose body went, saved strip projections after
wall coalescence, a fillet saved on a piece of a tapered side that is whole
now, a cut that starts from a piece that is no longer that piece, and a fillet
named on the lower of two stacked boxes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:31:23 -04:00
jyvikoandClaude Opus 5.5 4a652ba4a1 doc: a face its feature made from several roles has each as a name
A side drawn in collinear sketch pieces is one face the extrude made from each
piece (#1788): its first role is its name, and the others were kept as aliases,
like the names of faces merged into it by a later join. They are names of that
very face, not of faces merged into it: the face keeps them as synonyms, which
a stored name matches as exactly as the face's name (a piece of it, once it is
split), through copies and later features, and the face whose name a merge
keeps keeps its synonyms too. An extrude-side certificate made on one of the
pieces finds the joined face the same way, and the saved model records the
synonyms (model cache format 5).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:31:23 -04:00
jyvikoandClaude Opus 5.5 1b08d4b8b5 doc: a feature's face points are named on its own component's bodies first
Each component's bodies lie in its own coordinates in the state a feature's
points are named in, so a part inserted twice has a face at the same point in
each copy: a thread on the second copy was named after the first copy's face.
The points are named on the feature's own component's bodies first, then on
every body for a point that lies on none of them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:31:23 -04:00
jyvikoandClaude Opus 5.5 d62d248b76 doc: Untrim's face points pick faces of the body it untrims
FeatureKind::face_body did not name Untrim's body, so its face was looked up by
name on every body and could be taken from another one (a copy has the same
face names).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:31:23 -04:00
jyvikoandClaude Opus 5.5 b24d902692 doc, ui: a feature that lost a reference asks for it to be picked again
DocError::Reselect names the feature and the stored reference (a face or edge
name) that no longer finds what was picked: "<feature>: the reference `<name>`
no longer exists as it was picked; reselect it". Evaluation fills in the
feature's name; reselect_parts reads both back from a feature's error text, and
the UI shows the message translated (ar, de, en, he, ja, ko, zh in
assets/locales/pending/reference-reselect.json).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:31:23 -04:00
jyvikoandClaude Opus 5.5 6a133042cb Preferences: the body check is the kernel's, not named after SMLib
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:52:54 -04:00
jyvikoandClaude Opus 5.5 50501fe14a Preferences: Body check, once per feature by default
The Design page's Body check section sets the validation preference
(each_feature; each_step keeps the old checks after every step; off is
experimental), applied to the session like the hole and surface extrude
preferences, to the sessions a design is opened in off the window thread,
and kept in step with diagnostics.validation. ui.prefs refuses an unknown
mode; a saved unknown one reads as the default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:52:54 -04:00
jyviko 5d80fc5711 Engine: diagnostics.validation reads and sets the mode
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

With input and output schemas. The mode is the session's user setting:
kept when another design is opened, started, recovered or imported (each
evaluated under it), and by timeline.compute_all. Linked and extracted
designs are evaluated under it too.
2026-10-30 13:52:54 -04:00
jyviko 9acbcf924b Evaluation: under each_feature a feature's kept bodies are checked once
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

The model carries the mode (Model::set_validation) and runs each feature
under it. When a step left its check, every body the feature made or
changed is checked by SMLib before the state is kept: a body the check
refuses fails the feature with the check's reason and the body's name.
The mode is part of the cache context, except each_step, whose results
are develop's.
2026-10-30 13:52:54 -04:00
jyvikoandClaude Opus 5.5 4030b795c4 Kernel: a validation mode decides when sweeps, booleans and blends are checked
Validation::EachStep checks every solid sweep, boolean and blend result
in SMLib as before; EachFeature leaves those checks to the end of the
feature and says a check was left; Off skips them. The evaluation installs
the mode around a feature (validating), as watch installs a watch; outside
it every step is checked as always, and the kernel's worker threads run
under the caller's mode.

Under EachFeature a body decoded from a step keeps that step's SMLib
result (for its own record only), and check_kept checks it as the step's
own check would have, then lets it go; any other kept body is checked as
SMLib imports its record. The record can pass where the result fails: a
fillet's surface of revolution whose polar curve SMLib's check refuses
(fillets/1080-fillet-sloped-basin-1-mm-rim-r0-5-4-edges) is rebuilt on
import, and its round meets a wall at 72 degrees; checking the record
alone kept that round.

The largest-size search of a blend checks every candidate as it is built,
whatever the mode: a candidate fits only as a body the check accepts.
Surface operations and stitching keep their checks.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:52:54 -04:00
jyvikoandClaude Opus 5.5 051a7b714c Kernel tests: rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
2026-10-30 13:52:26 -04:00
jyvikoandClaude Opus 5.5 292ec65c8e Fillet rig: the chamfer running into the openings is named for what it does
fillets/1080-chamfer-runs-into-openings-refused already expects the
9 mm chamfer built and cut by the openings (V = 3350); its id said it is
refused. It becomes 1080-chamfer-runs-into-openings-cut-by-them, and
blend_fit's chamfer_through_the_openings_is_cut_by_them names it so.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:52:26 -04:00
jyvikoandClaude Opus 5.5 1878274cb7 Kernel tests, fillet rig: a chamfer past its rim builds, cut by what lies past it
The owner's ruling of 2026-10-30 (d7): a chamfer that reaches or runs
past a rim builds, everywhere, as SMLib's cliff overflow builds a convex
blend: on its faces' continuations, then cut by what the cliff cuts
away. The earlier rule refused a chamfer whose leg runs off its face.
SolidCraft has no such refusal of its own; SMLib refuses these, so the
cases fail on SMLib 985faaee and are listed with its reasons (traced in
gdb at SmFilletErrorInfo::NoteError):

- the sloped basin's single front edge past its rim (1 mm rim 2 and 3,
  0.5 mm rim 4): CloseRemovalRegion, "a cliff overflow's fillet boundary
  lies on the surfaces of two faces": the sheet's boundary along the end
  wall's top edge line from the edge's vertex to the top's contact
  (x = 20, y from -1 to 1, z = 30) lies on the top's plane and the end
  wall's both.
- the equal-slope basin's rim loop 2 and the 5 mm pocket's rim 5.5:
  CloseRemovalRegion, "a cliff overflow's fillet boundary closes on one
  face" (every edge of the loop blended).
- the sloped basin's front and right edges 2: status 1001,
  SmFilletNx2Corner, CalcFilletIntSideFace.
- the cylinder's rim 2 across the top and 25 down its 20 mm wall: status
  1001, SmFilletNx1ClosedCorner cannot compute its geometry.

Expectations, each from a closed form or an exact quadrature:

- chamfer_wider_than_sloped_basin_rim_is_refused becomes
  chamfer_wider_than_sloped_basin_rim_builds, ignored until SMLib builds
  it: the triangle clipped to y >= 0, times 30 + z (shoelace):
  73.450475, 142.112912, 184.526613; the rig's 1080-chamfer-sloped-
  basin-*-past-the-rim cases: V = 144459.882858, 144391.220421,
  144082.140054.
- blend_corner's a_rim_loop_chamfer_running_off_its_rim_is_refused
  becomes ..._builds, ignored likewise: sliced at depth t the mitred loop
  takes the pocket's rectangle grown by w(t) = d (1 - t / delta) on each
  side, clipped to y >= 0, less the rectangle, Simpson exact on each
  quadratic piece: 375.673069, V = 139957.660264 (the rig's
  1080-chamfer-equal-slope-basin-1-mm-rim-loop-2 too).
- 5835-chamfer-sloped-basin-1-mm-rim-2-two-edges: the same slicing with
  the front and right sides grown, 161.279149, V = 144372.054184.
- every-chamfer-pocket-rim-5-5-past-the-floor: 50 d^2 + (4/3) d^3 at
  5.5, the groove 0.5 deep round the floor included, V = 19265.666667,
  15 faces.
- 2893-chamfer-two-distances-past-the-bottom: the frustum r 8 to 9.6
  over 20, pi 20 (64 + 76.8 + 92.16) / 3 = 4879.102831, 3 faces.

Each drops "-refused" from its id (the 5.5 pocket's says past the floor).
The same slicing reproduces the existing 5835-...-4-mm-rim-2-2-edges
(176.006388), equal-slope loop 0.5 (24.455545) and half-width
(5.426545) values.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:52:26 -04:00
jyvikoandClaude Opus 5.5 3a2fac31a1 Kernel tests, fillet rig: a chamfer as wide as its rim builds
The owner's ruling of 2026-10-30 (d7): a chamfer that reaches or runs
past a rim builds, everywhere. The earlier rule refused a full-width
chamfer, naming the largest size that fits. SolidCraft has no such
refusal of its own (a blend's TooLarge is SMLib's SMLIB_ERR_NO_ROOM,
and the doc layer only names the largest fit), and SMLib already builds
these, so only the expectations change, each from a closed form or an
exact quadrature:

- chamfer_wider_than_sloped_basin_rim_is_refused's full widths become
  chamfer_as_wide_as_sloped_basin_rim_builds: the whole triangle,
  d drop / 2 (60 - drop / 3), drop = 20 d / sqrt((20 - margin)^2 + 400)
  (shoelace over the section, its length 30 + z between the sloped end
  walls): 21.662379 (1 on 1 mm), 5.359321 (0.5 on 0.5 mm). The basin and
  the removal move into sloped_basin and sloped_basin_rim_chamfer_removed.
- fillets/1080-chamfer-sloped-basin-{1,0-5}-mm-rim-as-wide-as-the-rim:
  V = 144511.670954, 144261.307346.
- fillets/every-chamfer-pocket-rim-5-full-depth: 50 d^2 + (4/3) d^3 at
  d = 5, V = 19583.333333, 11 faces (the walls used up).
- fillets/every-hole-top-rim-chamfer-10-full-depth: the triangle 10^2/2
  revolved at rho = 5 + 10/3 (Pappus), V = 16000 - 3250 pi / 3 =
  12596.607959, 7 faces.
- fillets/1113-chamfer-arc-top-edge-full-wall-height: the 9.5 case's
  Int rho asin(21/rho) h(rho) drho at s = 10, by Gauss-Legendre in
  u = asin(21/rho), 1303.400331, V = 8287.993768.

Each drops "-refused" from its id and its KNOWN_FAILING line goes: all
five pass on SMLib 985faaee.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:52:26 -04:00