Commit Graph
39 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 f37b954988 Native B-rep: a body is written as it serializes, not through a JSON value
encode_native_body turned the whole saved record into a serde_json
Value (a map with an owned key for every field of every face, edge,
curve and pcurve), checked it, counted it, then wrote it out. Building
that tree was most of the cost: on the Menger level 4 sponge (3 tools,
--save) the 101 bodies the model cache encodes, 535 MB of encodings,
took 24.1 s of encode_native_body, 20.8 s of it in to_value.

binary::write_serialized is a serde Serializer for the tagged binary
format: it writes each value as it is serialized and applies the same
checks as it goes (nesting, string and array budgets, floats within
1e12, the value budget, the size limit). An object's entries are put in
key order when it closes, as the JSON map held them; floats that are not
finite are null, as to_value made them. The bytes are the same: a test
encodes plain, blended, cut, extruded, painted, split, open, round and
far-placed bodies both ways and compares them, and all 101 Menger bodies
(6 to 28 412 faces, 15 kB to 68 MB) encoded both ways in one run were
byte for byte the same. The JSON-value writer stays for the tests that
build hostile records.

Menger L4 3-tool --save, two runs each: encode_native_body 24.1 / 25.3 s
before, 3.0 / 3.0 s after (the longest call 1.34 s -> 0.29 s); the run
41.2 / 41.4 s wall before, 39.1 / 39.2 s after (the encodings run on
16 threads).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 05:55:40 -04:00
jyvikoandClaude Opus 5.5 add3ebdb03 Kernel: the box-and-fillet wire records are SMLib's
box_and_fillet_have_stable_wire_records compared the encoding of a box and a filleted box
with records truck built (2f4d6acac). Since f11c0c571 an operation's result is the record
SMLib gives, which numbers the box's faces in its own order and the fillet's edges by its
history, so the golden differed in face order, face sources and edge history, not in the
encoding. Rewritten with NATIVE_BREP_BLESS=1 and checked against the geometry: the box 6
planes, 12 edges, 8 vertices, each face source's plane its face's; the filleted box 7 faces,
15 edges, 10 vertices (one edge replaced by a face: +1, +3, +2), the round a cylinder of radius
2 along x on the axis (y, z) = (2, 8), 2 from y = 0 and z = 10.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 04:32:50 -04:00
jyvikoandClaude Opus 5.5 1bc8b204f1 Kernel tests: a circle is one closed arc, a round wall one face
Since 09c979a4b a full circle in a profile is one arc of a whole turn, so what is built from
it is one closed edge and one wall closed along its seam. Five kernel tests still expected
truck's halves:
- a_small_hole_in_a_large_spline_face_cuts_cleanly: the Ø1 hole adds one face (its wall),
  not two; the removed volume (π · 0.25 · 40) is unchanged.
- fit_loop (two mesh_convert tests): a fitted circle is Loop2::circle, one segment.
- tight_bend_counts: a Ø10 tube swept up 20, round a quarter turn of radius 5, along 20. The
  circle starts at (5, 0), which runs up to (5, 0, 20) on the bend's axis, where the turn
  leaves it: the bend face has no seam and both straights' seams end there. By the ladder's
  rule (each whole curve once, each seam): 5 faces (2 caps, one per path segment), 6 edges
  (4 circles, 2 seams), 3 vertices (the seams' ends: (5,0,0), (5,0,20), (25,0,20)), the
  record's own counts.
- extruded_circles_go_as_cylinders: the record holds the wall as the cylinder it is (one
  face of three), no longer a rational spline; it still goes into SMLib as its cylinder.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 04:32:50 -04:00
jyvikoandClaude Opus 5.5 c070f044ab STEP import: a torus face round most of its tube is formed within one turn of it
A torus face covering most of its tube off the tube's quarter lines (an
exhaust collector's bend: 326° of the tube from −113.8°) needed a fifth
quarter along the tube, which STEP counts from the outer equator: its form
ran past a full turn of the tube and SMLib refused the solid. #8496 turns
frames about the axis only, and the torus label had no tube reference.

The torus label gets a tube start (`tube_start`, radians; 0 and left out
of the record by default, so older records mean what they did): v counts
from there, in every evaluator, form, pcurve, iso curve, tessellation,
placement, SSI and SMLib transfer. A spilling torus face's tube start moves
to where its tube begins, or a turn before where it ends, whichever puts
its tube circles on the grid of a round face they are about the axis of
(a pipe's cylinder meeting the bend); circles round the tube are labelled
from the tube start (brep::form::on_tube), so their forms and pcurves lie
on the face's quarter grid exactly. The saved-format change is one file,
crates/doc/src/format/pending/torus-tube-start.rs.

Engine assembly: COLLECTOR_EXHAUST_VER_1 now comes in as a closed solid
(refused 3 -> 2); Poppy Humanoid unchanged (4).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 21:22:11 -04:00
jyvikoandClaude Opus 5.5 623f1b9c16 kernel: native and SMLib-import tests on the record; the adapter's tests go
native.rs's test module keeps its encode/decode, wire-record, hostile-input and appearance
tests. Deleted with the adapter they tested: pcurves_on_planes_are_the_curves_mapped_exactly,
pcurves_fit_curved_faces_within_tolerance, pcurves_of_seams_lie_a_period_apart and
pcurve_pictures, with their helpers (pcurves_of, check_pcurves, check_faces, curved_bodies,
seam_faces, draw). smlib_import_tests count shells on the record; their notes no longer
speak of truck.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:50 -04:00
jyvikoandClaude Opus 5.5 f6590bcaa6 kernel: a saved body is its record; SMLib bodies convert with no healer
Encoding writes the body's own record and decoding makes the body from it: the adapter to and
from the old kernel is gone. A record goes into SMLib as given (SMLib's own form); one SMLib
refuses is an error that names why, never sent through SMLib's healer. A body made by SMLib keeps
the SMLib body. The bounded preview of a decoded body is a coarse mesh from the planner, charged
to its triangle budget.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 667cd33560 solidcraft-smlib: pcurves on B-spline faces are SMLib's own UV trims
On a B-spline face the export now takes each edgeuse's UV trim exactly as
SMLib holds it (EDGEUSE_NURBS_*): the face's parameters are SMLib's, so the
trim is the pcurve, reversed exactly (knots t -> a + b - t) where the
edgeuse runs against its edge, its knots mapped onto the edge record's
parameter where that is an affine image of SMLib's (identity for spline
edges, as_line's map for NURBS lines, the C side's map for lines), and its
end knots set to the edge interval where they differ by rounding (within
the schema's 1e-9 slack, else an error). Changed: export.rs `curves`
(per-edge TrimMap), new `trims`, `mapped`, `Face::given`,
`Edge::trim_map`, the face loop in `native_ordered`, `pcurves`,
`outer_area`.

Analytic faces and circle/ellipse edges keep brep::pcurve: SMLib keeps an
analytic face's trims on its internal rational B-spline (SmCylinder.h:
"the map from one to the other is not linear") and a circle's on its NURBS
parameter, neither an exact B-spline in the record's angle parameters.

brep::pcurve::EdgeUse gains `given`, a producer's exact pcurve taken as it
is (structure and interval checked, moved by whole periods with its loop,
never refitted). Existing construction sites (STEP reader, tests, truck
adapter) pass `given: None`; the existing tests change only for the new
field.

Built, clippy-clean and tested on 4b2c0eaf before the rebase onto
kernel-smlib/no-truck (not built: base in progress).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 42997a62ed WIP kernel: Body::mesh(&MeshTolerance) as the one mesher (does not build yet)
Body::mesh / mesh_plan / mesh_of and MeshTolerance (chord, display, display_of, export_of)
replace tessellate, tessellate_with, display_mesh*, display_plan*, reference_display_mesh_angular;
every caller in kernel, doc, engine, io, ui-egui, gpu and the CLI renamed mechanically; the
truck-mesher fallback, mesh_shells*, refined* removed; Body::new orients from the planner;
truck-meshalgo dropped from Cargo.toml with the tests of its hooks. Still to fix: trait imports
in tess/*, splitface/lumps/preview/step_in/boolean_record meshalgo uses, measure.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 5a630daee6 tess: a hole in a closed face lies in its outer loop's period
Each loop of a face is projected on its own, so along a closed direction a
hole can come out a whole period away from the outer loop. A revolved
dome (rational spline closed in v, bounded by its rim, its seam both ways
and the pole) has its outer loop opened at the pole into v in [-1, 0],
while a hole cut by a ball next to the seam projected into [0, 1]: the
triangulation covered the hole as well, and the cut measured 48118.36 mm³
instead of SMLib's 46424.50 (tangency-labs/solidcore#433, kernel case
sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam). Every other loop is
now moved by whole periods to the copy nearest the outer loop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 22cfc69c02 solidcraft-smlib: pin the fork at 276b509, SMLib C++ fixes from solidcore
SMLIB_REV moves from e1ac3c3 to capi-solidcraft 276b509: thread groove
booleans (#435, #410), a holed profile swept along a bent path (#411), a
revolution a turn past its range (#428), shell and offset faces (#402, #380,
#403), the check linear in the body (#431), a far box that leaked (#377),
fillets and chamfers where a neighbouring round collapses (#416, #417, #420,
#379), tangent faces round a non-manifold edge (#383) and split faces of an
exact NURBS surface (#387).

The last one is why the SMLib block-and-cylinder decode test no longer finds a
spline edge on part of its curve: SMLib keeps a split face's parameterization
now. The test keeps its volume check; the decode of such edges stays covered
by spline_edges_on_part_of_their_curve_load_as_that_piece.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 1d8299aedf kernel: an SMLib body keeps each edge's and vertex's tolerance through its record
SolidCraft's own record of a body SMLib made (the rig's record check, the saved body, the next
SMLib import) re-fitted every pcurve at the kernel's working tolerance, 1e-5 mm. SMLib's fillet
and chamfer surfaces lie some 2e-5 to 2e-4 mm off their faces, so 15 fillet and chamfer cases
failed that check although SMLib's own passed. And SMLib reported one tolerance for a whole body,
the largest any part of it needed, so one loose edge (a pocket cut left one at 0.23 mm) made the
whole body loose on its way back into SMLib.

Now the tolerances go per edge and per vertex, both ways:
- solidcraft-smlib reads and writes the fork's new SMLIB_FLAT_EDGE_TOLERANCE and
  VERTEX_TOLERANCE arrays. Export gives each edge and vertex record its own (never below the
  floor, which becomes the body's). Where those understate what an approximated edge needs on
  its face (SMLib holds a blend's end curve 2.3e-5 mm off its plane at 2e-5), the export falls
  back to SMLib's largest everywhere, as before. Import writes each record edge's and vertex's
  tolerance.
- `geom::brep::pcurve::EdgeUse` carries its edge record's tolerance, and a pcurve is fitted to
  it where it is larger than the face's.
- The kernel's decoded body keeps its record's edge and vertex tolerances
  (`Body::tolerances`, in its edge and vertex order) after an SMLib operation and a saved body's
  decode, and keeps them through a rigid placement. Its record writes them again; anything that
  builds a new solid drops them.

SMLIB_REV moves to the fork commit that adds the arrays (smlib-blends-abi2 4a67471, ABI 2).

Rig and ladder fillet and chamfer cases on SMLib: 43 pass before, 60 now, none lost. Tests: a
pcurve fitted to its use's own tolerance, and the ladder's 08/006 cylinder rim chamfer whose
record, saved body and placed copy all stay valid and SMLib's check takes back.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 ff0f7ccfa1 kernel: a body's record for SMLib takes a larger tolerance where an edge needs it
The record of a truck body is built to the body's working tolerance (1e-6 of its size, at
least 1e-5 mm), and truck's offsets and blends leave some edges a few times farther than that
from a face they bound: no pcurve fits, so the record and every SMLib boolean on the body
failed ("pcurve of loop 0 use 0 ...: the curve at 0 lies 3.2e-5 mm off the surface" in a
shelled revolve of the robustness generator). The record for SMLib now retries at ten and a
hundred times the working tolerance for the body, its edges and vertices before refusing; the
saved native body keeps the working tolerance. Robustness seed 64 (a filleted extrusion
joined to a cylinder), refused this way before, now builds as truck does to 1.6e-6 of its
volume.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 94c1598259 kernel: SMLib's round faces decode as truck's own revolutions are laid out
An SMLib cylinder, cone, sphere or torus decoded as a truck revolution with its parameters
swapped (angle, profile), which truck's own revolutions never have. The tessellator then put a
cone's apex at the wrong angle: a drill point through SMLib and back meshed 41 % too large and
oracle cases 18, 55 and 56 measured wrong areas and volumes. The profile now runs against the
record's v, unswapped, which keeps the record's natural normal and truck's (profile, angle).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 e35b4d744e kernel: revolutions of a line square to the axis go into SMLib as planes
A revolve's flat ends (a line square to the axis turned about it) were refused, so any
revolved profile off the axis could not reach SMLib (oracle case 29). Such a face now goes as
SMLib's plane square to the axis, its range the box round the sector the line sweeps.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 1980f9743f kernel: SMLib's export keeps every face of a void's shell
The export takes a closed boundary's faces from the side in the empty region and skipped
every use there that is not `same`, a rule meant only for a sheet (a shell that is its own
mate). It tested the chosen side against the mate instead of the shell against itself, so a
cavity's shell, taken from the void's side, lost its faces whose uses run opposite to their
surfaces: "a face no shell uses" for every cut that leaves a void.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 640d3d9ea5 kernel: truck's extruded circles go into SMLib as its cylinders
Truck extrudes a circle into rational splines, so every truck cylinder reached SMLib as
splines, and a box cut by one came back with edges 0.78 mm off their faces (SMLib's own check
refused it). A rational spline that is a circular arc swept straight along its axis (one
direction linear, the second row the first moved by one vector square to the arc's circle,
weights alike) now goes as SMLib's cylinder with the face's range on it.

The revolution mapping becomes one module for both (import/analytic.rs): each candidate face's
analytic surface is checked against the record's at 25 points of its domain, each point placed
on the analytic surface by its own (u, v), and turned over where the normals disagree.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 d271add1ad kernel: revolutions go into SMLib as its cylinders, cones, spheres and tori
Truck holds every round surface as a placed revolution, and a body SMLib made comes back from
truck that way too, so the SMLib import refused spheres, tori and any second boolean on a
first one's result. The import now turns each revolution of a line along or through the axis,
or of a circle centred on it or in a plane through it, under a rigid placement, into SMLib's
analytic surface: the face's range mapped from the revolution's parameters (angles moved into
the first turn: SMLib's torus breaks on a tube range below zero), checked against the
revolution at 25 points, and the face turned over (loops reversed, shell uses flipped) where
the analytic normal runs the other way. Other revolutions are still refused.

A result body's order is checked by each face's boundary edges as well as its identity:
Body::new rephases revolved faces onto new faces with the same edges.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 5238840bc8 kernel: booleans through SMLib behind SOLIDCRAFT_BOOLEANS, with SMLib's history
With the `smlib` feature, SOLIDCRAFT_BOOLEANS=smlib (read once per process, default truck)
sends every kernel::boolean through SMLib: each operand's schema 4 record imported and tagged
as operand 0 or 1, SmBrep's boolean, SMLib's check at every level, the result exported and
decoded (with its geometry check). A result either check refuses is an error. The setting
naming SMLib in a build without it, or anything unknown, fails every boolean instead of
quietly running truck, so a comparison never compares truck with itself.

The history is SMLib's tags renumbered into Body::history's index spaces. The export now
reports where each SMLib face and edge lands in canonical order (its arrays follow
SmBrep::GetFaces/GetEdges, the order the tags use). The result's order is checked against the
decoded solid by face and edge identity, the operands' by re-exporting the imported body and
comparing its numbering with the record's; where either differs the result has no history
rather than a wrong one. The result gets the operands' regularization protection and planar
roles as truck's does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 17eafa2d48 solidcraft-smlib: revolved surfaces into SMLib as exact rational B-splines
A PlacedRevolution record goes to SMLib as its exact rational B-spline
surface: each profile control point swept round the axis by a full circle of
four rational quadratic quarters starting at the face's first angle, then
mapped by the placement. The circle's parameter is not the angle, so the
face's angle range is converted pointwise and its pcurves are not carried
(SMLib rebuilds the trims). Where the placement mirrors, the record's natural
normal is the opposite of the map's, so the directions swap.

The B-spline matches the record's surface to 1e-12 with the same normal,
forward or not, mirrored or not; truck's sphere and torus now reach SMLib
with their analytic volume (1e-6) as manifold solids.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 62124a7117 kernel: spline edges on part of their curve load as that piece
SMLib bounds an intersection edge on a piece of its spline (seed 32 intersect:
a block and a cylinder, the top disc's edges), and the truck decode refused
such an edge ("not supported yet: a spline or intersection edge on part of its
curve"), since truck bounds an edge by its curve's whole range.

bspline::segment cuts a B-spline to a sub-interval of its domain exactly:
Boehm insertion of both ends until each has multiplicity p, then the knots and
control points between them, clamped on the interval. The same points at the
same parameters, so the edge keeps its interval and the record its numbers.
load_edge_curve loads a spline or rational spline edge on part of its curve as
that piece; an intersection edge on part of its curve is still refused. Our
own records (interval = the curve's range) load as before.

Tests: segments of a rational cubic with a double knot, inside a span, across
knots, from or to a domain end, match the whole curve within 1e-12; both
spline kinds load on a piece with that range and the same points, and beyond
the domain are refused; SMLib's block ∩ cylinder decodes (it was refused) with
π r² h within 1e-3.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:45 -04:00
jyvikoandClaude Opus 5.5 62142ef38e brep: a revolution of a closed profile is periodic along it
The adapter loads an analytic torus as truck's revolution of the whole profile
circle, a rational quadratic closed on itself, so an SMLib torus is one face
bounded by its two seam circles, each used both ways. The display evaluator's
domain gave a revolution a period around its axis only: projected along the
profile the loop jumped from one end of the knot interval to the other at its
start vertex, the plan failed ("boundary crosses itself") and the body fell
back to truck's mesher, which meshes a sphere bounded by its seam alone as
nothing (seed 60 union, a torus beside a sphere: 925.0 of 990.7 mm³).

tess::uv::closed_curve detects a closed profile the way closed does a closed
spline surface (clamped knots, first and last control point and weight the
same within 1e-9 of the polygon's extent; the shared checks are factored out),
the domain then has period = the profile's knot interval along it, and
EvalSurface::wrap/derivs wrap that parameter back into the interval, so the
plan's projection, unwrapping and both evaluators treat it as periodic. A
cylinder's or cone's line profile is unchanged.

Tests: a revolved whole circle, either parameter order, has both periods and
evaluates a period away as inside; SMLib's torus, alone and beside a sphere,
decodes without meshing to orient it, plans every face and measures within
1e-3 of 2π²Rr² (+ 4/3 πr³). With the closed profile undone the torus plan
fails as above.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:45 -04:00
jyvikoandClaude Opus 5.5 ce201eea1b kernel: SMLib spheres cut by a boolean decode oriented and meshed
Results of SMLib booleans on its own spheres came back wrong through
body_from_smlib (side-by-side runner: seed 13 cut −1611.9, seed 61 cut −252.4
against SMLib's 4056.9, seeds 46/61 union 80 % short). The schema 4 records were
right (check_geometry passes, outer loops counter-clockwise, shells out of the
material); three things on the truck side were not:

- Body::new orients a solid by the volume of truck's coarse mesh, and truck's
  mesher meshes a sphere bounded by its seam alone as nothing: the rest of the
  body set the sign and turned it inside out. A foreign record is oriented by
  its shells, so body_from_smlib now builds the body with Body::oriented
  (revolved faces turned as before, orientation kept, nothing meshed).
- rephase_revolved turns each revolved face so it sits around angle π. A face
  that uses its seam both ways goes all the way round; turning its surface ran
  the wrap through the face's hole, the display plan failed and the sphere
  meshed as nothing. Such faces now keep their wrap on their seam (truck's own
  primitives have none: their round faces are split).
- The display plan opened only a loop of one seam used both ways. A sphere face
  whose meridian a trim splits uses each piece both ways, turning back at each
  pole, and projected onto one parameter line ("boundary crosses itself"), so
  the whole body fell back to truck's mesher and lost its sphere faces. A loop
  through both poles that turns straight back at one now has its run between
  the poles moved one period along, whichever way keeps it within one period
  with a positive area (poles split as the planner splits them); the routing
  check finds such loops too.

Test: SMLib's sphere less a box cap beside its seam, across it (seam split) and
a bar bored into its side away from the seam decode without meshing to orient,
oriented as recorded, every face meshed, within 1e-3 of the exact volume.
Before, the decode meshed the body to orient it; with only the plan's pole
handling undone the −x cap measures 50.3 of 469.1 mm³, with only the
rephase undone the bored ball 252.4 of 4059.5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:45 -04:00
jyvikoandClaude Opus 5.5 27e996c44d brep: splines closed on themselves are periodic for pcurves and tessellation
A spline surface whose first and last control rows coincide in a direction
(points and weights, knots clamped there) closes on itself, but the display
evaluator's domain gave NURBS no period. The pcurve routine therefore never
moved a seam's second use by a period: SMLib's fillet round a hole's rim (a
rational spline closed in u) got both seam pcurves on u = 0, its outer loop
enclosed no (u, v) area, the decoded face tessellated to nothing and the body
measured 6839.73 mm3 against SMLib's 6989.00.

tess::uv::closed detects the closure from the record, within 1e-9 of the
control net's extent; the domain then has period = the active knot interval's
width, and the evaluator wraps a parameter outside that interval back inside
it, so pcurves, projection, sizing and the display plan all treat the direction
as periodic. The record stays as it is. The display plan hands both evaluators
wrapped parameters (the GPU does not wrap).

Tests: a rational torus band, a NURBS cylinder and a NURBS dome with a pole,
each bounded by a seam used twice, get seam pcurves one period apart; a record
of the band passes check_geometry and its seam uses on one line are refused;
SMLib's hole-rim fillet decodes with every face meshed and SMLib's volume
within 1e-3.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:44 -04:00
jyvikoandClaude Opus 5.5 144b569246 solidcraft-smlib: SMLib bodies into SolidCraft through schema 4
SMLib B-reps leave the C API as its flat arrays, read through the crate's
one flat wrapper (crate::flat::Flat, copied out as import::Arrays), and
become schema 4 records: shell pairs merged, sheets collapsed, radial cycles
normalised, analytic surfaces as their kinds (narrowing cones kept), loops
reversed where SMLib's surface is inside out, every pcurve from
brep::pcurve, canonical order, then validate() and check_geometry(). Edges
arrive as their own kinds; NURBS edges that are lines or circular arcs (the
primitives' circles) are recognised as a fallback and counted. With the
kernel's `smlib` feature, body_from_smlib() decodes them into a Body.

Adds the cylinder, sphere, cone and torus primitives. Each primitive passes
SMLib's own check at every level, its volume from the exact mass properties
matches the closed form, and it goes round SMLib -> schema 4 -> SMLib with
its counts, volume and a clean check. Truck now meshes a whole sphere
bounded only by its seam (SMLib's sphere) through the display plan.

SMLIB_REV moves to the fork's capi-primitives (the primitives on capi-flat
40bb855).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:44 -04:00
Brennen HerbruckandClaude Opus 5.5 2a22f4641b solidcraft-smlib: schema 4 records into SMLib through the flat arrays
SMLIB_REV moves to the fork's capi-static 40bb855 (flat arrays, C ABI 2).
flat.rs wraps them (Flat: arrays by id, Brep::export, Flat::import,
Brep::is_manifold_solid; FFI in ffi/flat.rs). import.rs lays a schema 4 record
out as those arrays: a closed shell becomes one SMLib shell per region it
separates, a sheet's shell holds both sides of each face, the infinite region
is marked void as SMLib has it, pcurves become UV trims on B-spline faces only
(reversed for edgeuses against their edge), planes with non-unit axes go as
their exact bilinear patch. Brep::from_record builds the SMLib body.

kernel: brep_record(body) gives a body's schema 4 record, and smlib_body
(feature smlib) its SMLib body, trusted (no healer: healing moved a
cylinder's volume by 9e-7). Box, cylinder and tilted cylinder keep their
analytic volume in SMLib (1e-9, 1e-6) and are manifold solids; truck's
spheres and tori are revolutions, refused with "not supported yet" for now.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:44 -04:00
jyvikoandClaude Opus 5.5 570028f31e brep: the truck adapter checks a record's geometry before decoding it
decode builds topology with Edge::new_unchecked and Face::new_unchecked,
so a record whose curves miss their vertices or whose pcurves miss their
edges loaded and failed later inside truck. It now runs check_geometry
after validate and refuses such a record (a cache miss at the IO
boundary). Only our own cache feeds it today; STEP and SMLib exports will.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:44 -04:00
jyvikoandClaude Opus 5.5 95b2295160 kernel: the truck adapter writes pcurves through brep::pcurve
The adapter now saves each edge's curve record and interval when the edge first appears and
computes every face's pcurves from those records and the surface record it writes, with the
shared plain-record routine; the truck-face version in native/pcurve.rs is deleted. Loops go
in as the record keeps them (relative to the surface), so a reversed face no longer has its
wires reversed and back again.

The native tests are ported (adapter::face_alone gives one face's record for them). The cut
body's intersection pcurves now fit at 1e-6 mm too: the routine follows the converged
intersection, and truck's own points are within its 1e-6 mm of it, which the lift check
allows for on intersection edges. docs/native-brep.md says where pcurves come from and what
a surface intersection's point at t is.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:44 -04:00
jyvikoandClaude Opus 5.5 02abecd52c brep: docs for schema 4, and a pcurve lift test
docs/native-brep.md describes schema 4: the records with their SMLib and
STEP names, regions and shells, the loop convention, every edge's uses,
the canonical order (a reversed face walked backwards), each curve and
surface kind's parameterisation, pcurve rules, validation, history, the
SCBREP05 envelope and what the truck adapter writes and refuses.

A test lifts every pcurve of a box, a filleted box with a bore and a
sphere onto its face and checks it is its own edge at both ends and the
middle; with a reversed face's pcurves left in truck's oriented order it
fails by 30 mm.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:44 -04:00
jyvikoandClaude Opus 5.5 2f4d6acacb brep: working tolerance, golden v5 records, cache producer 4
Edges, vertices and the body carry the face tolerance (10^-6 of the
body's size, at least 10^-5 mm): truck's traced intersection edges sit
about 1e-6 mm off their surfaces, so the linear tolerance is too tight for
a pcurve to lift onto them. The box-and-fillet golden fixture is the
schema 4 envelope now (NATIVE_BREP_BLESS=1 rewrites it), and the adapter
tests cover a pair of lumps. The model cache's producer revision becomes
solidcraft-truck-adapter/4.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:44 -04:00
jyvikoandClaude Opus 5.5 445fb23859 brep: schema 4 types, validator and truck adapter
The plain B-rep follows SMLib's flat form with STEP's names: regions
(infinite first), face/wire/vertex shells, oriented faces, faces with a
domain and edge or vertex loops, oriented edges with a pcurve each, edges
with an interval, a tolerance and their list of uses, vertices with a
tolerance. Curves and surfaces are unbounded; their bounds are the edge
interval and the face domain. Loops are relative to the surface's natural
normal. Schema 3's read-only intersection and revolution records go.

The validator keeps schema 3's caps and adds the structural rules:
references, loop shape and connectivity, regions and closed shells, the
pcurve interval, natural parameter ranges, every edge's uses (primary
first, upper = !forward) and the canonical order of shells, faces, edges
and vertices. A reversed face is walked backwards, as truck's edge_iter
walks it, so truck's face and edge indices are the canonical ones.

The truck adapter writes truck's absolute wires as the loops, numbers
everything as the kernel does, and builds regions from the shells (a
tessellated nesting test only when there are several closed shells).
Pcurves come from pcurve::pcurves only; until it supports a face, encode
fails and the body is a cache miss. The envelope signature becomes
SCBREP05.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:44 -04:00
jyvikoandClaude Opus 5.5 5a9bd4398d brep: history types move to solidcraft_geom::brep::history
FaceOrigin, Change, FaceProv, Side, EdgeOrigin, EdgeProv and History move
unchanged (fields, serde derives) to solidcraft-geom, so a backend can
report history without depending on solidcraft-kernel. The pure methods
(composition, renumbering, count checks, mark_shared_split) move with
them and return brep::history::Failed, which converts to
KernelError::Failed with the same "history: …" message.

What needs a kernel body (History::identity, check, face_sources) stays
in the kernel as the BodyHistory trait; solidcraft_kernel::history
re-exports the types, so existing paths keep working.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:44 -04:00
jyvikoandClaude Opus 5.5 0d026e9757 kernel: pcurve fits start from four samples per span
Each sample of an intersection curve is one of truck's double projections
(about 0.13 ms in a release build), and a fit evaluates the curve at every
sample and halfway between. Starting from four samples a span instead of
eight halves that; the checks stay at eight points a span, and the knots
at the curve's own breaks already carry the shape. The cylinder cut by a
tilted box now takes 70 ms at 1e-3 mm and 149 ms at 1e-5 mm for all its
faces (release), from 183 and 638 ms.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:44 -04:00
jyvikoandClaude Opus 5.5 099026d94d kernel: fitted pcurves on curved surfaces, unwrapped and closed per wire
Every edge not exact on a plane gets a cubic 2D B-spline on its curve's own
parameter: through the parameters of the curve's ends, least squares
through samples between (banded normal equations), with spans halved and
sampled twice as densely wherever the lift misses the curve by more than
half the tolerance, at the samples or halfway between them. Knots start
where the curve's parameterisation is less smooth: a spline's own knots
and the vertices of an intersection curve's leader polyline, with the
multiplicity a cubic needs there (without them the cylinder-minus-box
intersection curves took 400 spans at 1e-3 mm). Spans and rounds are
capped; a fit that does not converge, or a curve farther from the surface
than the tolerance allows, fails naming the wire, edge and distance.

Samples are projected with the kernel's own surface parameter search (the
evaluator's form, parameterised as truck parameterises it; truck's search
for surfaces it does not take), each from the one before, unwrapped along
periodic directions. Where the surface collapses (a pole) the undefined
parameter comes from the nearest sample that defines it, so a pcurve runs
straight into the pole. Each wire's uses are then moved by whole periods so
each starts where the one before it ends, starting after a pole junction
if there is one; at further pole junctions the offset that gives the loop
a boundary's turn is taken. The wire then moves into the base period. A
seam edge used twice is fitted once.

Truck places intersection curves on their surfaces to about 1e-6 mm, so
their pcurves need a tolerance of 1e-5 mm or more; the test records that.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:43 -04:00
jyvikoandClaude Opus 5.5 26ab8981d0 kernel: exact pcurves of lines and splines on planes
A plane's parameters are affine in space, so the pcurve of a line or a
(rational) B-spline on a plane is the curve's own knots and weights with
its control points mapped into (u, v): no fit. Curved surfaces and
intersection curves still return "not supported yet". A test helper checks
every pcurve the way the schema validator does, its interval against the
curve's range, the lift error and the wire's closure in (u, v); the box's
line pcurves lift onto their lines' ends bit for bit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:43 -04:00
jyvikoandClaude Opus 5.5 ee5deffaa4 brep: Curve2 pcurve type and the truck pcurve entry point
The shared base for the schema 4 types and the truck pcurves: 2D B-spline
pcurves as SMLib keeps its UV trim curves, and the truck adapter's pcurve
function, not supported yet.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:43 -04:00
bherbruckandClaude Opus 5.5 d0afc31632 Save the evaluated model with every design: exact, stored once, scaled caps (#3053) (#3093)
* Model cache written by default: exact bodies, stored once, scaled caps (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* bench-open: say why bodies were not kept

* Exact planes and revolutions; budgets for large bodies (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Native B-rep: rebuild shells as the kernel made them (closed and seam edges) (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs: the model cache and the exact native B-rep (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* bench-open: time a save without the cache too

* Model cache entries are Deflate-compressed (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Model cache: one that does not fit the design file is left out, never a failed save (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 02:31:08 +00:00
midasdf bbd4f29ebb Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)
Thanks @midasdf.
2026-10-16 06:26:27 -04:00
selune 913583bfee Show a bounded native-cache preview before authoritative reconstruction (#463)
Refs #303. file.save / file.save_as can store a warm native geometry cache (cache: true, off by default) keyed to the document hash, app version and adapter revision. Opening shows a bounded preview from it until the rebuilt session replaces it. Any cache failure counts as a miss.
2026-10-13 02:54:01 -04:00
selune 9f88537927 Define a kernel-neutral native B-rep format and guarded adapter (#461)
A SolidCraft-owned portable B-rep schema (geometry schema 2 with analytic curves and surfaces, explicit frames and ranges, fitted intersection curves) and a versioned body envelope (SCBREP03) with its own metadata records, a bounded binary codec, a validator with resource budgets, and an adapter that refuses what it can't convert exactly. Pinned by a box-and-fillet golden fixture. Not yet written by application saves. Refs #303.
2026-10-13 00:13:29 -04:00