Commit Graph
10 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 6892ceac78 brep, kernel: code that reads an edge's angles takes them from the circle, code that evaluates takes the NURBS form
Edge::curve_interval (and brep::curve_interval for assemble's edges) gives the interval on the
edge's curve itself: a form circle's angles of its ends, its frame turned by the SMLib conversion
so the angle grows along the NURBS. lip and the ruled surfaces read arcs by it; the hull, the
blend tangents, the patch pcurves, point paths, IGES output and the prism runs evaluate on
Edge::parameters. assemble carries an edge's form through.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:51 -04:00
jyvikoandClaude Opus 5.5 b6a3b31ff9 brep: a face on a cylinder, cone, sphere or torus carries the NURBS form SMLib holds it as
Every SMLib analytic surface is a B-spline surface, and its trims are in that NURBS's
parameters. Face::nurbs keeps that NURBS: the face's domain and pcurves are its (u, v), and
`surface` says what the face is. Face::parameters is the surface every (u, v) evaluation uses.
The SMLib conversion reads and writes it (fork FACE_NURBS_FORM, SMLIB_REV c4483f6); the STEP
writer writes the analytic surface and the face's edges without pcurves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:50 -04:00
jyvikoandClaude Opus 5.5 849bb1f24b kernel: face sections along a direction as SMLib's exact curves
face_section_along cuts a face through a point by the plane that holds the
face's exact normal there and a direction (Brep::face_section): the iso curve
"along a direction" of a link, as record curves on their intervals, the
B-splines SMLib made. The projection and the section share the picking reach,
the curve tolerance, the error words and the conversion to record curves.
(Intersection links take the base's meeting_edges, SMLib's imprint.)

lib.rs (coordinator): export point_path::face_section_along.
(not built: base in progress; no error in these files)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:49 -04:00
jyvikoandClaude Opus 5.5 95e9a80faf kernel: iso_curves, a face's isoparametric curve exactly, trimmed by its loops
iso_curves gives the isoparametric curve of a body's face through a point, along
its first or second parameter, as record curves: on a B-spline surface the
surface's own row at the point's other parameter (each control point its
column evaluated there, homogeneous, so exact for rational nets), on an
analytic surface its line or circle. It is cut where it crosses the face's
loops: each crossing solved on the loop's pcurve itself (bracketed on samples,
then bisected on the pcurve), the pieces between kept where their middle lies
inside the face (even-odd over the loops), neighbouring inside pieces joined.
A revolved surface record is not supported yet.

lib.rs (coordinator): export point_path::iso_curves.
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:49 -04:00
jyvikoandClaude Opus 5.5 7b5d732e38 kernel: project_onto_face, sketch curves projected onto a face as SMLib's curves
project_onto_face projects sketch segments along a direction onto the face of a
body at a point through Brep::project_curves (smlib_project_curves), each
projected piece the B-spline SMLib made, returned as a record curve
(RationalSpline) on its interval, within a millionth of the body's size.

lib.rs (coordinator): export point_path::project_onto_face.
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:49 -04:00
jyvikoandClaude Opus 5.5 7952516eb4 doc: sweeps along linked and planar curves follow the exact curves
A sweep path through 3D sketch curves sampled every planar sketch curve in it
into a 0.01 mm polyline, and took every linked 3D curve as the points its link
stored, so SMLib got a many-cornered polyline (and refused a smooth one). Now:

- a planar sketch curve in such a path is its exact segments
  (PathPiece::Segs of PathSeg::of_sketch over exact_segs);
- a linked curve whose source has an exact curve keeps it: Wire::exact holds
  the record curves (WireCurve: schema 4 curve + interval) end to end along the
  wire, set with the wire when the link is resolved: an included body edge its
  record edge (kernel::brep_record), an included sketch curve leaving the plane
  its segments (kernel::sketch_record_curve). Wire::map carries them with a
  placement. The sweep follows them through kernel::curve_path (line, arc,
  ellipse as rational quadratic spans, polyline, B-spline as Bézier spans).
- curves known only as points (projected onto a face, intersection and iso
  curves: the link resolves them on the mesh) stay points.

Kernel, for the sheet and blend ports: planar_face_record (a profile face as a
schema 4 sheet record with exact pcurves), smlib_sweeps::chain_curves (a
segment chain as SMLib curves), body_from_record (any record into SMLib,
checked), sketch_record_curve; record curves from design files are checked in
curve_path. Format: pending/wire-exact-curves.rs.

lib.rs (coordinator): export SpaceBezier, curve_path, edge_path,
sketch_record_curve and planar_face_record from the kernel.
(not built: base in progress; kernel and sketch check clean, doc not reachable)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 33cfa34d41 kernel: path segments hold any rational Bézier span, and edges as paths
PathSeg::Bezier(SpaceBezier) replaces PathSeg::Cubic: a rational Bézier span in
space of degree 1 to 9 (homogeneous control points), so a drawn spline's cubic
spans and an edge's own curve are one kind of segment, swept by SMLib as the
NURBS it is. SpaceBezier evaluates, differentiates (quotient rule on the
hodograph), measures and walks by length (Gauss-Legendre), reverses and maps.

edge_path gives a body edge's record curve as path segments exactly: a line,
an arc, an ellipse as rational quadratic spans, a polyline's lines, a B-spline
as its Bézier spans between knots (bspline::segment); an intersection curve
(no exact curve in the record) is refused. PathPiece::Segs carries such exact
curves in a point path; PathSeg gains reversed, mapped (a placement) and
of_sketch (a sketch segment on its plane). The cubic_* helpers are deleted.
surfaces.rs: its one PathSeg::Cubic arm follows the rename.

lib.rs (coordinator): export SpaceBezier and edge_path from point_path.
(not built: base in progress; cargo check shows no error in these files)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 c4bb4a3529 kernel: a cornered sweep carries on from where SMLib placed the profile
Brep::sweep_placed (smlib_sweep_placed, fork f6f428b) returns the rigid motions
carrying the profile onto the sweep's first, middle and last sections. Each run
of a path with corners now takes its end pose from the last motion (less the
straight lead-out along the end tangent) and its inside seeds from the middle
one, for every path segment kind: the 3D sketch spline next to a corner is no
longer refused. Deleted: the predicted carry along a run (carried) and
point_path::cubic_split, which only it used. SMLIB_REV at f6f428b.

Fork: build + ctest, only smlib_flat_roundtrip's known incline failure.
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 f73b3be1a4 kernel: a 3D sketch spline path takes the SMLib sweep only
On kernel-smlib/no-truck: sweep_point_path_with goes straight to SMLib's sweep (no truck
branch), and PathSeg::flattened (truck's polyline of a path) takes no Cubic arm (the wildcard
keeps the segment).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 d1eb8b20a0 kernel: SMLib sweeps along drawn 3D sketch splines, exactly
A drawn 3D spline reached the kernel only as its sampled polyline (Wire.pts), so SMLib refused
to sweep along it ("not supported yet: SMLib sweep along a smooth path of points"). The doc
holds the spline's fit points; the curve is the centripetal Catmull-Rom spline that
fit_polyline samples. Each span of it is a cubic (Barry-Goldman), and its derivative at a fit
point depends only on that point, its neighbours and the two knot intervals, so neighbouring
spans share it: the spline is exactly one cubic Bézier per span, C1 across the spans.

- geom: catmull_rom holds the curve: samples() (fit_polyline's arithmetic, moved verbatim;
  sketch::fit_polyline now calls it) and beziers(), the exact spans; ArcLength on CurveN
  (Gauss-Legendre per knot span, Newton for the parameter at a length).
- kernel: PathSeg::Cubic, a cubic Bézier in space (the 3D counterpart of PathSeg::Curve, which
  is planar), with its arms wherever PathSeg is matched (start/end, tangents, length, point at
  a length, turn, SMLib curve as a degree-3 NURBS, halving). PointPath / PathPiece carry a path
  through 3D sketch curves: polylines as points, drawn splines as their fit points (reversed
  when the path runs them backwards); PointPath::segs gives SMLib the spans and the lines;
  sweep_point_path_with sweeps it (SMLib through sweep_with, so corners, twist, scale, rails and
  orientation take the existing routes). A smooth polyline piece (a projected or linked curve,
  which the kernel only has as points) is still refused on SMLib.
- doc: path_points builds the PointPath (a wire with three or more fit points is a spline
  piece); solid sweep and pipe call sweep_point_path_with; rails, surface sweeps and curve
  networks take its points as before.

Checked in scratch (not committed): the spans pass through every fit point and every
fit_polyline sample at its parameter (1e-12), C1 at the joints and round a closed spline;
samples() is bit-identical to the old fit_polyline over 1180 random open and closed inputs;
SMLib sweeps of a radius-2 circle along an open spline and round a closed one match
pi r^2 L (L by independent quadrature of the curve's definition) to 1e-7 and 3e-8.
sketch/wire.rs: the existing closed-spline test reads SPAN_SAMPLES from its new home.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00