Commit Graph
241 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 a71450aebd Preferences: symmetric surface extrudes read only the total distance
The Design preference surface_extrude_symmetric_per_side, which gave new
symmetric surface extrudes their distance on each side, is removed with
its Surfaces section, its session field and its labels. A symmetric
surface.extrude given no convention splits the total around the start
plane, as solid.extrude does; timeline.edit and timeline.redefine give a
one-sided extrude made symmetric the same. default_extrude_convention,
which only existed to read the preference, goes too.

An explicit `convention: legacy_per_side` and the marker saved designs
carry are unchanged. A saved preferences file that carries the key loads
as before (the prefs test now covers both removed keys).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 16:19:33 -04:00
jyvikoandClaude Opus 5.5 45823002c0 SMLib: pin 68fb916 (tangency-labs/smlib#67)
The owner's bar running tangent into a cylinder rounds its concave arc and
its top edge both together and one after the other in either order, at
r 1 to 7. Two more peg cases come off the fillets known-failing list.

The ladder's shelled dome ring now has 9 edges, not 7: each of its two
cylinder walls is one full-turn face with its seam edge (one wall face per
extruded circle), where it was two halves. Faces, vertices, area and volume
are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
2026-10-30 15:19:29 -04:00
jyvikoandClaude Opus 5.5 e43fe1ab04 Kernel rig: diagnostics.validation is a setting, exempt from cases
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
2026-10-30 13:52:54 -04:00
jyviko 1a93a39770 CLI: run and kernel-cases take the validation mode
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

solidcraft-cli run --validation MODE, kernel-cases --validation=MODE and
cargo xtask kernel-cases --validation MODE (with --ladder too), so the rig
runs under each mode.
2026-10-30 13:52:54 -04:00
jyvikoandClaude Opus 5.5 292ec65c8e Fillet rig: the chamfer running into the openings is named for what it does
fillets/1080-chamfer-runs-into-openings-refused already expects the
9 mm chamfer built and cut by the openings (V = 3350); its id said it is
refused. It becomes 1080-chamfer-runs-into-openings-cut-by-them, and
blend_fit's chamfer_through_the_openings_is_cut_by_them names it so.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:52:26 -04:00
jyvikoandClaude Opus 5.5 1878274cb7 Kernel tests, fillet rig: a chamfer past its rim builds, cut by what lies past it
The owner's ruling of 2026-10-30 (d7): a chamfer that reaches or runs
past a rim builds, everywhere, as SMLib's cliff overflow builds a convex
blend: on its faces' continuations, then cut by what the cliff cuts
away. The earlier rule refused a chamfer whose leg runs off its face.
SolidCraft has no such refusal of its own; SMLib refuses these, so the
cases fail on SMLib 985faaee and are listed with its reasons (traced in
gdb at SmFilletErrorInfo::NoteError):

- the sloped basin's single front edge past its rim (1 mm rim 2 and 3,
  0.5 mm rim 4): CloseRemovalRegion, "a cliff overflow's fillet boundary
  lies on the surfaces of two faces": the sheet's boundary along the end
  wall's top edge line from the edge's vertex to the top's contact
  (x = 20, y from -1 to 1, z = 30) lies on the top's plane and the end
  wall's both.
- the equal-slope basin's rim loop 2 and the 5 mm pocket's rim 5.5:
  CloseRemovalRegion, "a cliff overflow's fillet boundary closes on one
  face" (every edge of the loop blended).
- the sloped basin's front and right edges 2: status 1001,
  SmFilletNx2Corner, CalcFilletIntSideFace.
- the cylinder's rim 2 across the top and 25 down its 20 mm wall: status
  1001, SmFilletNx1ClosedCorner cannot compute its geometry.

Expectations, each from a closed form or an exact quadrature:

- chamfer_wider_than_sloped_basin_rim_is_refused becomes
  chamfer_wider_than_sloped_basin_rim_builds, ignored until SMLib builds
  it: the triangle clipped to y >= 0, times 30 + z (shoelace):
  73.450475, 142.112912, 184.526613; the rig's 1080-chamfer-sloped-
  basin-*-past-the-rim cases: V = 144459.882858, 144391.220421,
  144082.140054.
- blend_corner's a_rim_loop_chamfer_running_off_its_rim_is_refused
  becomes ..._builds, ignored likewise: sliced at depth t the mitred loop
  takes the pocket's rectangle grown by w(t) = d (1 - t / delta) on each
  side, clipped to y >= 0, less the rectangle, Simpson exact on each
  quadratic piece: 375.673069, V = 139957.660264 (the rig's
  1080-chamfer-equal-slope-basin-1-mm-rim-loop-2 too).
- 5835-chamfer-sloped-basin-1-mm-rim-2-two-edges: the same slicing with
  the front and right sides grown, 161.279149, V = 144372.054184.
- every-chamfer-pocket-rim-5-5-past-the-floor: 50 d^2 + (4/3) d^3 at
  5.5, the groove 0.5 deep round the floor included, V = 19265.666667,
  15 faces.
- 2893-chamfer-two-distances-past-the-bottom: the frustum r 8 to 9.6
  over 20, pi 20 (64 + 76.8 + 92.16) / 3 = 4879.102831, 3 faces.

Each drops "-refused" from its id (the 5.5 pocket's says past the floor).
The same slicing reproduces the existing 5835-...-4-mm-rim-2-2-edges
(176.006388), equal-slope loop 0.5 (24.455545) and half-width
(5.426545) values.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:52:26 -04:00
jyvikoandClaude Opus 5.5 3a2fac31a1 Kernel tests, fillet rig: a chamfer as wide as its rim builds
The owner's ruling of 2026-10-30 (d7): a chamfer that reaches or runs
past a rim builds, everywhere. The earlier rule refused a full-width
chamfer, naming the largest size that fits. SolidCraft has no such
refusal of its own (a blend's TooLarge is SMLib's SMLIB_ERR_NO_ROOM,
and the doc layer only names the largest fit), and SMLib already builds
these, so only the expectations change, each from a closed form or an
exact quadrature:

- chamfer_wider_than_sloped_basin_rim_is_refused's full widths become
  chamfer_as_wide_as_sloped_basin_rim_builds: the whole triangle,
  d drop / 2 (60 - drop / 3), drop = 20 d / sqrt((20 - margin)^2 + 400)
  (shoelace over the section, its length 30 + z between the sloped end
  walls): 21.662379 (1 on 1 mm), 5.359321 (0.5 on 0.5 mm). The basin and
  the removal move into sloped_basin and sloped_basin_rim_chamfer_removed.
- fillets/1080-chamfer-sloped-basin-{1,0-5}-mm-rim-as-wide-as-the-rim:
  V = 144511.670954, 144261.307346.
- fillets/every-chamfer-pocket-rim-5-full-depth: 50 d^2 + (4/3) d^3 at
  d = 5, V = 19583.333333, 11 faces (the walls used up).
- fillets/every-hole-top-rim-chamfer-10-full-depth: the triangle 10^2/2
  revolved at rho = 5 + 10/3 (Pappus), V = 16000 - 3250 pi / 3 =
  12596.607959, 7 faces.
- fillets/1113-chamfer-arc-top-edge-full-wall-height: the 9.5 case's
  Int rho asin(21/rho) h(rho) drho at s = 10, by Gauss-Legendre in
  u = asin(21/rho), 1303.400331, V = 8287.993768.

Each drops "-refused" from its id and its KNOWN_FAILING line goes: all
five pass on SMLib 985faaee.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:52:26 -04:00
jyvikoandClaude Opus 5.5 b4af45dd07 Kernel rig: the horn torus and the circle revolved touching its axis build
SMLib's revolve now splits a curve where it touches the axis inside itself
(tangency-labs/smlib#66), so both cases come off their known-failing lists.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
2026-10-30 12:14:18 -04:00
jyvikoandClaude Opus 5.5 7fe880a7bf SMLib: pin f8fd83e (tangency-labs/smlib#66)
The batch brings history Kept for a face only cut by a vertex, revolve of a
curve touching its axis, loops touching at a vertex, a torus rail on its axis,
and the fillet causes behind the owner's bar running into a cylinder: a
tangent edge past a tangent side edge is the corner's edge, the rails of a
round collapsing at its end end at one point, and a trace from a tangent point
starts along the curve.

The two peg cases with the sketch's solver residues come off the fillets
known-failing list: both build.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
2026-10-30 12:14:18 -04:00
jyvikoandClaude Opus 5.5 e46359ff04 Kernel rig: the patch cases the fill now builds come off the known-failing lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 09:17:35 -04:00
jyvikoandClaude Opus 5.5 9a45d42484 Kernel rig: inspect.analysis is a display analysis switch, exempt like the others
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 08:48:54 -04:00
jyvikoandClaude Opus 5.5 9b35727976 Fillet rig: the known-failing list names the report- cases, not their old ids
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 08:02:50 -04:00
jyvikoandClaude Opus 5.5 6cc7597502 SMLib import: an extruded circle is a cylinder over the face's trimmed range
This replaces the spline fallback of 64efbe7f6. A face SMLib holds as a rational spline that is
an extruded circle was recognised as a cylinder over the spline's whole parameter range: for the
upper half of the peg's wall after the front top round that range runs 393 degrees round (u in
[-15, 40.18], SMLib's support surface extended past the face), and SMLib refuses a cylinder past
one turn. The face itself, its loops' box, spans u in [0, 8 pi]: half a turn. The cylinder now
takes the face's trimmed range, the least and greatest u and v of its uses' pcurves over their
edges' intervals, found to rounding on each Bezier span (the values at the pieces' ends bound the
extreme from below, the control points from above; pieces that cannot beat the best are dropped,
the others halved). A face whose trims run more than one turn round is no face of a cylinder: it
is refused as an invalid record, never kept as a spline.

The peg (40 x 16 x 10 bar, R8 end, a disc R8 extruded 10 up on its top, joined), front top edge
rounded r2: the body measures to 1e-7 of its closed form, the three r2 corner rounds after it
build and measure, and the upper wall comes back from SMLib a cylinder of radius 8 (engine test).

The rig case of the round of the edge where that round meets the wall (tangent at one end) still
fails, for another reason: on the wall as its exact cylinder SMLib refuses the round as larger
than the faces beside its edges allow (it fades to nothing at the tangent end) instead of
returning a body its own check refuses. Its KNOWN_FAILING line says so.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 08:02:50 -04:00
jyvikoandClaude Opus 5.5 ccc690c535 Fillets: a curvature-continuous fillet's corners are G2 patches
A curvature-continuous fillet (type curvature, equivalent radius 2) of the three edges at a top
corner of the owner's bar built, but its corner was SMLib's own patch, which is only tangent to
the rounds: Continuity Analysis measures a 35.8 / mm curvature jump across its seams (with the
rounds G2 to the faces everywhere else), and it shows as a dome sitting on the corner, the
vertical round's shading lost under it. All three edges were rounded; the corner was not
curvature-continuous, and nothing said so.

Such a corner, where three or more rounded edges meet, is now set back (1.5 r unless a setback
names it) and left open by SMLib with the curvature sections (smlib_blend_setback_open with
SMLIB_BLEND_CURVATURE), and filled with the G2 patch fillet_g2_corners already uses for circular
rounds (fillet_g2_with_g2_corners). The `corner` option no longer leaves a curvature fillet with
SMLib's patch: its corners are always G2, and setbacks on it set back the curvature rounds (they
were circular rounds before). Where SMLib or the patch cannot build it, it is refused.

On the reported geometry every seam of the rounds and the patch is G2 (rig
report-fillet-curvature-three-edges-at-bar-corner-solver-residues), and the rounds outside the
setback cube measure exactly: V0 - 27 - (the quintic section, A2 = 0.597884, along the front edge
from 3 to the wall and along 7 and 13) = 9541.116961 (...-outside-setback). With round coordinates
SMLib's open sheet fails its own check (a 2D curve cusp, SmBSplineCurve test 13): the fillet is
refused, listed as known failing (report-fillet-curvature-three-edges-at-bar-corner).

Test: corner_g2_tests::curvature_rounds_meet_at_a_g2_corner (box corner, r5: the patch's jump
under CURVATURE_SHARE / r clear of the hole's corners, SMLib's own patch over ten times that).

Changes a default: a saved curvature fillet with such a corner rebuilds with the G2 patch; there
is no preference or fallback to SMLib's patch.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 08:02:50 -04:00
jyvikoandClaude Opus 5.5 a9755bdd23 Fillet rig: the owner's reports are report- cases; the G2 corner graded at its seams
The cases from the owner's reports in the app (no issue) were named and cited after issues they
only resemble (#9, #896, #1207). They are report-<name> now and list no sources; their `what`
says where they were reported. The README gives the convention (report- for a report with no
issue or pull request, cov- for a command with no source).

report-fillet-g2-corner-of-bar-running-into-cylinder was graded by a 3^3 volume band and a face
count, which say little about a G2 corner. It keeps the band (provable: the patch differs from the
rolling ball only within the setback cube) and adds the corner seams' curvature jump, as
fillets/9-fillet-corner-r1-curvature-default-setback scaled by r = 2 (at most 0.0025 / mm, clear
of the hole's corners by 0.48 mm, within 4.4 mm of the corner). A new
...-outside-setback case cuts the setback cube [-1, 3] x [-1, 3] x [7, 11] away and grades the
three rounds outside it exactly: V0 - 27 - (front spandrel from x = 3 to the wall + (1 - pi/4) r^2
over 7 and 13) = 9342.029541. The bare face counts are dropped.

The -solver-residues recipes now take the reported sketch's points exactly (the arc's end
x = 41.649711830726524); they fail as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 08:02:50 -04:00
jyvikoandClaude Opus 5.5 de9c005f2b Blends: a blend face is named by its picked edge, not an edge it took up
A 220 x 11 two-distance chamfer of a tapered plate's bottom front edge (rig fillets/5181) runs up
the front face past its straight side edges, l2|start and l6|start, and takes them up: no result
edge comes from them. SMLib leaves the blend face untagged, and it was given every blended edge
whose two faces lie next to it: the picked edge l1|start and both taken-up side edges. Its name
came from the first in edge order, F3:blend:F2:side:l6|F2:start, an edge the user never picked.
A blend face now comes from the picked edges it lies between; only a face that lies between no
picked edge's faces (a corner's piece over a short edge the corner took up) comes from the
taken-up edges it lies between. The chamfer is F3:blend:F2:side:l1|F2:start everywhere on it.

Persistent names: a blend face that also lay between the faces of an edge the blend ran over is
now named by its picked edge only. There is no alias for the old name (5181's
F3:blend:F2:side:l6|F2:start): a saved reference to it is reported lost.

Also corrects 5181's "what": the chamfer builds (335399.749), it is not refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 08:02:50 -04:00
jyvikoandClaude Opus 5.5 1e6c91a108 Fillet rig: the concave arc where a bar's top meets a cylinder its sides run tangent into
An r2 round of the arc adds the spandrel ring clipped by the bar's sides, integral over rho in
[8, 10] of [2 - sqrt(4 - (10 - rho)^2)] rho 2 asin(8 / rho) = 18.455363. With round coordinates
it builds to that; with the reported design's sketch residues (~1e-10 mm) SMLib's blend fails,
status 1001 (SmFilletNx1Corner: unable to make topology at the arc's end), listed as known
failing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 08:02:50 -04:00
jyvikoandClaude Opus 5.5 c9bf97ce49 Blends: an edge is smooth only where its faces are tangent all along it
The edge where a round runs into a cylinder's wall it is tangent to at one end (the bar's front
top round meeting the wall at (40, 0, 8), where the round's contact with the front face meets the
wall's tangent line with it) was refused as smooth, "nothing to round": the faces' normals were
compared at the edge's start alone, which was that tangent end. They are now compared at five
stations from end to end, and an edge is smooth only where its faces meet tangentially at every
one: this edge is a crease everywhere but its end. The wall's seam with the front face, tangent
all along, is still refused as smooth.

The round of that edge with its tangent chain (the top's concave arc) now reaches SMLib, whose
result fails its own check (internal poles, coincident control points, cusps where the round
fades out): its rig case in fillets is listed as known failing for that SMLib defect.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 08:02:50 -04:00
jyvikoandClaude Opus 5.5 977949819e SMLib import: an extruded circle past a turn stays its exact spline
A round of a bar's top edge, where the bar's side runs tangent into a cylinder standing on its
round end, seemed to build: SMLib's result holds the cylinder's wall as a rational spline whose
parameter range runs 393° round (u in [-15, 40.18]). Going back into SMLib (to measure the body
or change it again) the record's extruded circles become SMLib cylinders with the face's range on
them, and that range was 6.866 rad: SMLib refuses a cylinder past one turn
(SM_ERR_INVALID_INPUT from BrepFromFlat's face range check). The body could not be measured, a
second round on it failed, and the app said one of its freeform faces can't be used. An extruded
circle whose range runs more than one turn round now stays the exact spline it is.

The bar of the reported design (40 x 16 x 10 with a R8 end, a disc R8 sketched on its top and
extruded 10 up, joined): the front top round removes the spandrel up to the cylinder's wall,
integral over y in [0, 2] of (2 - sqrt(4 - (2 - y)^2)) (40 - sqrt(64 - (8 - y)^2)) = 32.306475;
the three rounds at the other top corner after it remove 53.285832 in all (spandrels outside the
corner cube, the cube less the rolling ball's eighth). Both now build and measure to 1e-7; the
curvature corner of the three edges at once (setback 3) builds too.

Rig cases (fillets) for the three reports: the curvature corner of the three edges, the front
top round, and the three corner rounds after it pass; the same corner rounds with the design's
~1e-10 mm sketch residues fail in SMLib (its corner's surface of revolution is close to singular
at its boundary) and are listed as known failing. (Their ids take the report- convention in the
rig commit later on this branch.)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 08:02:50 -04:00
jyvikoandClaude Opus 5.5 bf85e0a6cf Fillet rig: the knife edge's R2 round builds on the new SMLib pin
fillets/851-fillet-knife-edge-tip-r2 passes on develop's SMLib (985faae): its line
leaves KNOWN_FAILING. The chamfers of the same edge still fail.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:37:21 -04:00
jyvikoandClaude Opus 5.5 30dce7fbaf Fillet rig: the sloped basin's rim loops with their mitred corners' exact volumes
The owner ruled on 2026-10-30 that rounds meeting at a concave corner beside an
unpicked sharp edge are mitred, which fixes the basin loops' re-entrant corners.
Each loop case now grades its exact volume (rel 1e-6): each blend takes
Int width(z) length(z) dz, its section's width from its wall to its arc or chamfer
line (the front one clipped at the slab's face where it runs past the rim), its
length between its neighbours' walls extended; each corner of two picked edges adds
the overlap of their section prisms in the quadrant beyond both walls,
Int width_1(z) width_2(z) dz (r^3 (5/3 - pi/2) for vertical walls, as
every-pocket-rim-edges-r2). One edge alone reproduces the single-edge closed forms to
3e-7 of the removal. The equal-slope chamfer loop 0.5 passes; the others stay on
KNOWN_FAILING with the causes they had (SMLib status 1001, the surface-of-revolution
check, rounds past the rim not built by subtraction).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:37:21 -04:00
jyvikoandClaude Opus 5.5 ecbca1f747 Fillet rig: grade the 851 rows' rounds G1 at their own tangent seams
The 851 table rows grade continuity again, on each round's seams to the faces it
rolls on, picked by points at the middle of its edge (the top front round's at
z = 8 on the front and y = -19 on the top, the arc's at rho 23 and rho 21, the
uprights' at their contacts). The default `blend` selection read G0 there because
it pairs a blend face with the contact faces of every edge in the feature, so where
a round ends square on another edge's contact face (a crease by construction) it was
graded as a tangent seam: a gap in the grader's seam selection, worked around here
by naming the seams. All seven rows pass.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:37:21 -04:00
jyvikoandClaude Opus 5.5 191fa98395 Fillet rig: the R7 round past a thin wall's inside corner held to its exact volume
fillets/1668-fillet-outer-top-edge-of-thin-wall-r7-past-inside-corner (and the
both-sides R7 case) now grade the volume at rel 1e-6 (0.04 mm^3), not the rig's
1e-3. The closed form is exact: V0 = 104 64 42 - 100 60 40 less the round's
section (1-pi/4) 49 along 104 plus its part over the hollow, the square
[25,30] x [35,40] outside the circle about (25,35), Int_sqrt24^5 (5 - sqrt(49-u^2)) du
= 0.0050679 mm^2 (a 0.0005 grid gives the same to 1e-9), along 100: 38458.896.
SMLib gives 38458.389, 0.507 mm^3 less: exactly that part over the hollow, which is
not material, taken anyway where the round opens its slit. The unit test's bound
was right; the case goes on KNOWN_FAILING with that cause. The both-sides case
passes at the tighter tolerance.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:37:21 -04:00
jyvikoandClaude Opus 5.5 94938b3b54 Kernel rig sources: the kinds of the four sources the new cases cite first
316 and 5835 are merged PRs, 545 and 616 closed issues.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:37:21 -04:00
jyvikoandClaude Opus 5.5 51316b7ec7 Import rig: the horn torus quarter written to STEP and read back, as a case
The round trip's volume moves from the STEP unit test to an import rig case
(616.850, Pappus); the unit test keeps the writer's logic, the degenerate torus
written as one B-spline face and no toroidal surface or surface of revolution. The
case fails today where the revolve does (KNOWN_FAILING).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:37:21 -04:00
jyvikoandClaude Opus 5.5 24a58066cf Sweeps rig: a circle touching its axis revolved a quarter turn, as a case
The horn torus quarter (a circle r5 touching the Z axis, revolved 90 deg) is a
sweeps rig case with its Pappus volume, pi 25 x 2 pi 5 / 4 = 616.850. SMLib's
revolve refuses the profile today (status 1001), so it is on KNOWN_FAILING.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:37:21 -04:00
jyvikoandClaude Opus 5.5 8b9e0e0c00 Continuity rig: an opened tube end capped G1 and G2, as cases
A cylinder r10 x 30 with its top face deleted, the rim patched G1 and G2 and
stitched, becomes two continuity rig cases: one valid solid whose rim seam reaches
the order asked (the dome's shape is the fill's own, so no volume). They fail
today as the unit test did (the general fill refuses the cap: it folds) and are on
KNOWN_FAILING; the unit test and its helpers are removed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:37:21 -04:00
jyvikoandClaude Opus 5.5 10fe62a2b0 Surfaces rig: the cylinder and torus windows the general fill patches, as cases
A 240 deg window through a cylinder's wall and a saddle window in a torus's inner
wall, their cut faces deleted, patched G0 and G1 and stitched, become surfaces rig
cases: the G1 cylinder seals to the whole cylinder's volume within 0.5 % with G1
seams on the window's edges, the G1 torus reaches G1 on its rim, the G0 fills are
one valid solid. They fail today as the unit tests did (the general fill refuses:
it folds) and are on KNOWN_FAILING; the unit tests are removed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:37:21 -04:00
jyvikoandClaude Opus 5.5 06f7fa501a Shell rig: the drain floors, the rounded opening and the arc-sided plate as cases
The shell unit tests that checked geometry become shell rig cases built through
commands: the trough and the pocket whose floors fall 1 deg to a central drain
(the pyramid made as two triangular prisms intersected, in place of
convex_polyhedron; the cavity integrated exactly over the cells where each moved
facet is highest, sharp inner corners as the ladder's tier 09), the box opened at
a bottom rounded R2 and R2.4 (refused: the rim would have no thickness) and R1.5
(built, exact volume), and the plate with a hole through its arc side. Four
action-matrix shells that regressed (issue-616's lid, the ring-cut frame, the
filleted shelled box shelled again, the up-down join) get small cases too. The
ones that fail today are on KNOWN_FAILING with their cause, and the unit tests are
removed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:37:21 -04:00
jyvikoandClaude Opus 5.5 ebd1b15098 Fillet rig: the geometry of the failing fillet and chamfer unit tests, as cases
The fillet and chamfer unit tests that checked geometry become fillets rig cases,
built through commands with answers derived by hand (each method field gives the
derivation): a plate outline and a disc rim as tall as or past their wall, a
notched block's outline at R7 and R8, a cube corner as wide as its faces (refused,
and reduced), the 1668 wall at R7 alone and both sides, the 2852 U shell at R30
(refused, naming 25.24), the 851 knife edge (R2, chamfers 0.5/2/5 on three
constructions), the arc top edge at the full wall height and at 9.5, the 851
table of selections, the 556 top edge ending on the boss wall, the 2893
cylinder-rim chamfer refusals and the elliptical rim, seed 33's full round, the
sloped basin rim blends (single edges with exact volumes, loops with the slab's
box), and three action-matrix chamfers and fillets. fillets/851's three-edge
corner gets its volume (67.051 removed, re-derived on a grid; the engine test had
67.05). Chamfers whose leg runs off the face beside the edge are refused and rounds
past a face on its tangent side build, as the owner ruled on 2026-10-30. The cases
that fail today are on KNOWN_FAILING with their cause.

The unit tests are removed, except two cut to what no command can express: the
per-edge-radius refusal at a cube corner and the chamfer of a cylinder's seam.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:37:21 -04:00
jyvikoandClaude Opus 5.5 e9963439b1 Kernel tests: the round into a hole moves to the rig, with the hole cut the test's way
a_round_into_a_hole_is_cut_by_it (issue_324_tests.rs) built rig case
fillets/324-fillet-over-hole-overlap's body, but cut its hole with a cylinder
longer than the block (z -1 to 11) where the rig extrudes a sketch circle
flush. The new case fillets/324-fillet-over-hole-cut-by-overlong-cylinder
builds it that way (solid.cylinder, base z -1, height 12, cut) and holds it to
the same hand-derived answer: block 40x20x10 less the r3 hole at (20, 14.5)
(282.74) less the R4 round on the top edge at y = 20, 40 (16 - 4 pi) = 137.35,
plus what both remove, the integral over y in [16, 17.5] of
(4 - sqrt(16 - (y - 16)^2)) * 2 sqrt(9 - (y - 14.5)^2) = 0.375830 (re-derived
with the substitution y = 17.5 - s^2, 200000 steps):
V = 8000 - 90 pi - 40 (16 - 4 pi) + 0.375830 = 7580.287315, and G1 on the
blend. It passes today (aarch64, SMLib), as the flush case does, so it needs no
KNOWN_FAILING line; the unit test, a duplicate of the two cases, is dropped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:12:24 -04:00
jyvikoandClaude Opus 5.5 2f88ca2f62 Kernel rig: everyday chamfers of box edges and pocket rims
A box edge chamfered 2 and by two distances (3 and 1, and flipped, told apart by the
centre of mass); a pocket's rim chamfered 1, by two distances, 4.9 (fits), and 5 and
5.5 (refused by the owner's rule on full-width chamfers: built at 5 today).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:07:31 -04:00
jyvikoandClaude Opus 5.5 fd571d076a Kernel rig: everyday fillets after fillets
A box edge rounded, then the edge meeting it at the corner, in both orders (both the
three-edge rolling-ball corner); r3 then r2 (the r2 round's torus about the r3 round's
axis, by Pappus); an L-bracket's front inner outline after its bend round; a block's
top edge after the arc round at the cylinder (fails today: G0 at the round's end on the
crease); a curvature round after a curvature round with Tangent chain off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:07:31 -04:00
jyvikoandClaude Opus 5.5 06e802ffee Kernel rig: everyday rounds of an L-bracket's bend
Inside bend r3, outside r5, both concentric (r3 and r8), the inside r35 using up both
inside faces, r36 refused naming 35, and the inside bend Type: Curvature.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:07:31 -04:00
jyvikoandClaude Opus 5.5 cd7a099f42 Kernel rig: everyday rounds and chamfers of a hole through a plate
Top and both rims rounded r1 and chamfered 1; the top rim rounded r10 (as deep as the
plate), r12 (past it on its tangent side: built by subtraction, fails today with
status 1001) and Type: Curvature; chamfered 9.9 (fits) and 10 (the full depth:
refused by the owner's rule, built today). Volumes by Pappus.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:07:31 -04:00
jyvikoandClaude Opus 5.5 d027399e0c Kernel rig: everyday rounds of a pocket and a boss
A rectangular pocket's floor edges, rim edges and both rounded r2, the rim r5 as deep
as the pocket; a boss's root r2 and r10 (as tall as the boss) and its top rim r2.
The rim cases fail today: SMLib puts a corner patch where two rim rounds meet at a
concave pocket corner, where the rounds running into each other make a mitre (four
faces more; the volumes agree to 5e-4).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:07:31 -04:00
jyvikoandClaude Opus 5.5 f78e7fd66d Kernel rig: everyday rounds on a block joined to a cylinder
A block whose sides meet the cylinder at creases: the concave arc at the wall above
the block's top r2, the cylinder's top rim r2, the block's long top edge r2 with
Tangent chain off and Type: Curvature. A block as wide as the cylinder, its sides
running tangent into the wall: the arc and the long top edge each rounded alone
(built or refused as continuing tangentially). Volumes by Pappus or one-dimensional
quadratures of the exact sections, the round ended by the planes it runs into.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:07:31 -04:00
jyvikoandClaude Opus 5.5 57090ba2e3 Kernel rig: everyday box corners and box edges, rounded and chamfered
Three edges at one box corner rounded r1 and r3 with the rolling-ball corner, r3 with
Corners: Curvature at its default setback and at 3.5, and refused at 3 (the radius);
the corner chamfered 2; all twelve edges rounded r2; one edge rounded Type: Curvature.
Volumes in closed form (strips plus sphere octants, half-space intersection, the
rounded box as a Minkowski sum, the quintic section's area 113/756 s^2); G1 at every
round's seam, G2 for the curvature round and the corner patches.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:07:31 -04:00
jyvikoandClaude Opus 5.5 beaed5b351 Kernel rig: threads/2369 names the tap maker's 6.8 mm drill for M8
The case expected "drill 6.75 mm for M8", the major diameter less the pitch.
Since 05f1c6b9a (Tapped holes: the tap maker's drill for every form) a tabulated
size names the tap maker's drill, 6.8 mm for M8 x 1.25 (Yamawa YEU23 p.704), as
case 2115 already grades and engine thread_tests.rs asserts; major less pitch
is for a size no table lists. The refusal itself and its reason are unchanged.
The case passes and leaves threads/KNOWN_FAILING.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 23:18:03 -04:00
jyvikoandClaude Opus 5.5 a0a75dc781 Kernel rig: import/4561 passes, off the known-failing list
The zero-area triangle is dropped (previous commit): the box converts with six
faces and V = 1000 mm^3, as the case expects.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 23:18:03 -04:00
jyvikoandClaude Opus 5.5 8c37bc7568 Fillet rig: R10 past the full round is refused naming 7.5 mm, as the case asks
fillets/4782-fillet-two-end-verticals-past-a-full-round passes: SMLib (90aabff) refuses
R10 on the 15 mm wide box's two end verticals as too large, and the refusal now names
the largest radius that fits, 7.5 mm (the full round). Run on aarch64 Linux with
--known-failing: every other fillets case as listed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 23:17:55 -04:00
jyvikoandClaude Opus 5.5 15c31a96fc Kernel: planar source lineage finds each face's support through an index, with no budgets
Which input plane each result face lies on was found by scanning every input plane whose
normal x was within the resolution's angle: quadratic on axis-aligned parts (two thirds of the
faces have normal x = 0), so it was capped at 16 384 faces a body and 2 M comparisons, and the
join of the 20 level-2 sponges of a level-3 Menger sponge (7 326 faces) was refused past the
comparison budget.

The planes are now indexed by their unit normal, in cells twice the bound on two matching
normals' difference (asin(angular) < 2 angular), and in each cell by their offset from a common
centre, searched in the window linear + |a.o - c| |n_b - n_a| that
d_b - d_a = (b.o - a.o) . n_b + (a.o - c) . (n_b - n_a) gives, plus rounding slack. The index
offers a superset; same_support still decides each match, and candidates are taken in the same
order as before, so every answer is unchanged. A plane with a normal not of unit length is
offered to every query. Both caps are removed: results are bounded by inputs capped where they
entered. The descriptor-size budgets on kept roles are unchanged.

Rig, --known-failing, results compared case by case with develop's: booleans (129) and shell
(28) identical except booleans/5126-join-menger-sponge-level-3, which now passes in 38.9 s on
aarch64 and leaves KNOWN_FAILING.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 23:17:42 -04:00
jyvikoandClaude Opus 5.5 177eb207fe Exploded views are shown only: the design's placements and Capture Position leave them out
explode.show put the view's placements in the uncaptured moves, so occurrence.properties reported
the exploded placement and Capture Position (and reparenting, moving bodies between components,
copying or pasting in place, URDF export) wrote the view's offsets into the design. The session
now records which uncaptured moves are the view's (Session::exploded); what reports the design's
placements or works a new placement out from them uses the design's own moves
(uncaptured_moves, design_document), while the viewport and picks still show the view.

New case cov-explode-show-keeps-the-placements: the arm's properties are the same before, while
and after the view is shown, and Capture Position keeps nothing. The two explode cases that read
occurrence.properties while exploded now expect the design's placement, centre (20, 0, 5), as the
command says ("shown only; the design keeps its placements").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 23:17:34 -04:00
jyvikoandClaude Opus 5.5 ffb1e650df Isocurve Analysis: count curves each way, evenly spaced across the face
The curves were held on a 1-2-5 ladder from the world origin, so count 3 on a 40 x 30 face gave 3
one way and 2 the other. They now follow the command's contract: the held parameter at
lo + k (hi - lo) / (count + 1), k = 1…count, over the face's extent. Faces of the body on the same
surface record are spaced together over their combined extent, so a face a boss splits still
shows the same lines straight across the split.

New case cov-isocurve-40-by-30-face-count-3: x = 10, 20, 30 and y = 7.5, 15, 22.5, to 1e-9 mm.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 23:17:34 -04:00
jyvikoandClaude Opus 5.5 16d467e14a Point and Plane Along Path: exact on the path's curves by arc length, and a t outside 0…1 is refused
Both walked the picked curve's display polyline: a point a third along an R10 sketch arc was
0.87 µm off (8.6603, 5). They now evaluate the path's exact curves by arc length: lines and arcs
in closed form, a free-form span at the parameter its arc-length integral reaches (body edges by
their record curves, 3D sketch curves by their arc, spline, line or linked exact curves; only a
curve that exists as points alone, an intersection edge or a projected curve, runs along them).
The arc's point is now within 1e-12 mm of (10 cos 30°, 5, 0).

A t outside 0…1 was clamped silently, which the contract (`t: expr, 0…1 along it`) does not
say: it is refused ("t is 1.5: a point along a path is 0 (its start) to 1 (its end) of the way
along it"). The construction cases grade the arc and line to 1e-9 mm, past-the-end is refused,
and a new case takes the middle of a symmetric cubic spline, (20, 7.5).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 23:17:34 -04:00
jyvikoandClaude Opus 5.5 cf2b3a62fc Fair Surface: a face of degree 1 one way fairs along its curved way, and a face with nothing free is left as it is
A face of degree 1 in one direction (an extruded spline) was refused with "a fairness term does
not fit the net's degrees": the thin-plate energy's S_vv asks for second derivatives a linear
direction does not have. On every span that term is exactly zero, so it is dropped; the energy is
the bending along the curve and the twist. A face whose held layers are its whole net (a
single-span cubic with its edges kept, an extruded curve's two rows) has no interior control
point: it is left exactly as it is, its energy reported unchanged, 0 steps.

cov-fair-single-span-face-has-nothing-free-to-move passes and leaves KNOWN_FAILING.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 23:17:34 -04:00
jyvikoandClaude Opus 5.5 a1dbb7c08a Kernel rig: the two G2 corner cases are graded clear of the vertices, as the ladder grades them
Where a round meets a plane it is only tangent to it: its curvature jumps by 1/r there, so no
corner patch can be G2 to both at that point. The cases graded the whole seam and could not pass.
They now bound the curvature jump at stations clear of each seam's turn, within reach of the
corner, scaled by r (ladder 07/019's bound at r5): r1 within 2.2 mm, 0.24 mm clear, 0.005 per mm;
r5 within 11 mm, 1.2 mm clear, 0.001 per mm. Develop's corner gives 0.00135 and 0.00027 per mm
(the jump at the vertex is 1.017 and 0.2035, the round's own 1/r), so both leave KNOWN_FAILING.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 22:15:34 -04:00
jyvikoandClaude Opus 5.5 d094d43f23 Compare Bodies: each region measured exactly, on the cut of the two bodies
inspect.compare integrated a region's volume along sampling lines: the
40 x 30 x 5 slab between a box and one 5 mm taller came out at 5976.49 mm3
against 6000. The regions are still found from the two surfaces; each one's
volume, centre and box now come from the pieces of the exact cut a - b (or
b - a) that lie there, measured as inspect.measure measures a body
(measured_by: boolean). Where a cut cannot be made the region keeps the line
integral, marked measured_by: lines, with a warning. The rig case
cov-compare-taller-box passes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 22:15:29 -04:00
jyvikoandClaude Opus 5.5 97935eed86 Inspect: the centre of mass from the exact faces, as Measure takes it
inspect.center_of_mass measured each body's display mesh, so a cylinder r 5,
h 10 came out at 784.13 mm3 against 250 pi = 785.40, and the answer moved with
display quality. It now takes the exact mass properties inspect.measure uses
(ModelBody::measure), skips bodies that enclose no volume as Measure does, and
lists what it skipped. The rig case cov-center-of-mass-box-and-cylinder passes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 22:15:29 -04:00
jyvikoandClaude Opus 5.5 2937d9e889 SMLib: pin 1ccd461, the batch of 2026-10-30 (tangency-labs/smlib#58–#62)
- #58: a fillet's tangent-point step no longer depends on the blends before it (solidcore #1173).
- #59: the fillet clean-up keeps the target's edges and faces by a mark, not by address (#1176).
- #60: capi test, a line projected through a sphere's poles meets itself smoothly at each pole.
- #61: offset faces removes a step wall the move closes to nothing and merges the two tops, so
  shell/cov-replace-face-step-onto-the-higher-face builds.
- #62: thicken puts a flat side wall on its plane (solidcore #1599), so a cylinder sheet's end
  rings are planes: surfaces/cov-thicken-cylinder-sheet-symmetric-tube passes.

Both cases leave KNOWN_FAILING.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 22:15:25 -04:00