Commit Graph
1434 Commits
Author SHA1 Message Date
brett19andClaude Opus 5.5 48fcb7aac1 Merge fixes from the ui test pass and the gates
Main's thread.direction keys go with develop's thread hand, which replaced them. Vietnamese for the
messages develop added while main made vi a complete catalog. CGA and 1-bit themes set develop's
comb and section hatch colours. A ribbon button with a persistent effect is pressed only while its
tool runs, so persistent_ribbon_pressed alone decides how its effect is shown; other analyses stay
pressed while on. Two of main's ui tests listed as failing on SMLib, with why.
Gates: fixed thread tables become slices, one collapsed if, rustfmt.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 19:38:55 -07:00
brett19andClaude Opus 5.5 11a89713c7 Merge fixes from the first SMLib test pass
Model cache key covers the crates develop's kernel adds under doc (profile, smlib, step).
A piece taking a name also takes the feature that made it: SMLib lists a cut's pieces in another
order, and the swap left the name on a piece of the wrong feature.
A replaced analysis keeps its status slot. A command with no world picks does not place the model
first, so assembly.mass_properties answers for a flattening placement. FeatureCommon loses the
touching key the merge added; only the contracts that read it take it.
Two of main's tests listed as failing on SMLib, with why.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 18:44:56 -07:00
brett19andClaude Opus 5.5 4cd2ae0620 Tests from main: the world state is a Result here
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 17:31:28 -07:00
brett19andClaude Opus 5.5 c18491f52e Merge origin/main into smlib
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 17:27:48 -07:00
brett19andClaude Opus 5.5 1b17dd7f54 Merge fixes: every crate and test target compiles on the merged tree, but for crates/geom's hlr
world_state, view::bounds, home_camera and scene return Result on develop; new
main code takes that with ? or session_world. New fixtures carry the spline's
nurbs. ForeignCopy::of returns Result. occurrence_placement_with walks the path
with its moves, since the placement index holds pending_moves only.

The hlr port is separate and still to come: this commit does not compile as it
stands in crates/geom/src/hlr.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 17:01:30 -07:00
raykholo e4a67d1e30 Assembly: move sketches to the part they're drawn on (#10218) (#10219)
* claim: #10218

* Assembly: move sketches to the part they're drawn on (#10218)

`component.move_sketches.to_parts` moves each given sketch, or every sketch in the design, whose
plane is an exactly attached face of a part's body into that part through
`component.move_sketches`, as one undo step. Sketches with no single part to go to stay where they
are, and the reply lists what moved and what stayed, with the reason. The Sketches folder's menu
offers it for the folder's sketches (or the selected ones), and a sketch's menu for that sketch or
the selected sketches; the status bar says how many moved and why the others stayed.

`component.move_sketches` now keeps a face-attached sketch where it is on its face: the sketch is
authored in the new component's placement (the face's own when the component owns the face), and
its picked point and repair plane are carried into it. Before, a face-attached sketch moved out of
the design was left without an author placement and failed to evaluate.

* Tests: the moved part is free to move; face anchor path

* Tests: move the to_parts test to the component command tests

* Shorter label: Move Sketches to Their Parts
2026-10-31 23:42:47 +00:00
brett19andClaude Opus 5.5 5a161e542b Merge main into smlib (develop): 76 conflicting files resolved
main beb35029a (Release 0.29.0), develop 05f5e8601. Committed as resolved and
not yet compiling; fixes follow by layer.

Where the two sides could not both stay as written:
- Section caps: develop's stencil crossing count (with hatch by part) kept;
  main's WINDING/NOT_CAP marking and its fs_solid_touch removed. main's #9407
  test is kept and has to hold on the count.
- crates/kernel/src/prism.rs: develop's, which has no 3D prism boolean; main's
  #6904 route has nothing to change there. Its test still has to be ported.
- Continuity legend: main's details card, with develop's G3/G4 classes.
- inspect.analysis one at a time: while main's "several analyses" preference is
  set, turning one on leaves the others on.
- Model cache: FORMAT 8, since neither side's reader reads the other's records.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 16:40:37 -07:00
semmelrindeandClaude Opus 5.5 80fb02f0b8 Sketch Ellipse: Major radius and Minor radius boxes while drawing (#10279) (#10282)
* Sketch Ellipse: Major radius and Minor radius boxes while drawing (#10279)

The Ellipse tool showed no value boxes. After the centre it now shows
Major radius, after the end of the major axis Minor radius; a typed value
places the point at that size and becomes the ellipse's dimension, as for
a circle's Diameter. sketch.draw.dimensioned takes major_radius and
minor_radius for sketch.ellipse, so Dimension new shapes covers it too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Ellipse: test the typed radii in the tool and in sketch.draw.dimensioned, and say so in the guide (#10279)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Ellipse: rustfmt the new engine test (#10279)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 23:18:35 +00:00
Colin Faulkingham e0c1b8adbd Sketch: snap to infinite construction-line crossings (#10011) (#10285)
* claim: #10011

* Fix snapping at infinite construction-line crossings (#10011)
2026-10-31 22:23:57 +00:00
raykholo 2e3448f348 Sketch: an option to make the part active when sketching on its face (#10215) (#10216)
* claim: #10215

* Sketch: an option to make the part active when sketching on its face (#10215)

Preferences › Sketch › "Sketching on a part's face makes that part active", off by default.
When it is on, a sketch started on a face of another component's body activates that component
at the picked placement first and is made there, as after an explicit activate. The part stays
active, so what is built from the sketch lands in the same part.

For scripts the same is `sketch.create` `activate_part: true`; the reply's `activated` names the
component and placement. On an error the active component goes back to what it was.

* Tests: a free part, no edge projection, the sketch on the face plane
2026-10-31 21:52:09 +00:00
P'tite TêteandP'tite Tête 52765304cd fix: Sketch rectangles and centre circles take expressions (#10251)
- sketch.rectangle.center and two_point: a corner given with expressions is a fixed point that follows its parameters, as with sketch.line
- sketch.circle.center: a radius or diameter naming a parameter is a driving dimension; a string naming none is just the number; bare numbers read in the design unit
- A radius that is not a number is refused with its own message and no longer passed over for diameter
- sketch.circle.two_tangent: a string radius reads bare numbers in the design unit

Co-authored-by: P'tite Tête <asso@ptitetete.com>
2026-10-31 20:07:36 +00:00
Colin Faulkingham bba2fc1400 Report omitted print-face selections in command-script exports (#10230) (#10235)
* claim: #10230

* fix: report omitted print-face assignments in script exports
2026-10-31 19:58:48 +00:00
Ben Rog-WilhelmandClaude Opus 5.5 8be56316f6 Sketch Chamfer: several corners at once, as Fillet does (#8998)
The three sketch chamfers take `points: [corners]` (a point reference or
{a, b} each), as sketch.fillet does: every corner is cut alike in one
edit, and a corner that can't be cut, or is named twice, refuses them all.
The Chamfer window sends every picked corner instead of refusing a second.


Claude-Session: https://claude.ai/code/session_01PVKpSVXR9iiwSM9B25kpvq

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 19:28:14 +00:00
Colin Faulkingham d4144ddf9b Select: resolve faces and edges from a point or index (#10171) (#10191)
* claim: #10171

* fix(select): resolve faces and edges from a point or index
2026-10-31 19:11:54 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 76e009ab10 Viewport: blend grid levels while zooming instead of popping (#9570) (#9608)
* claim: #9570

* Cross-fade the viewport grid between levels while zooming (#9570)

grid_step switches the spacing in a step (1, 2, 5 times a power of ten), so
the whole grid swapped at once as the view zoomed through a switch and
popped over and over while scrolling. Near a switch the drawn grid now
draws the outgoing and incoming levels together, weighted by a smoothstep
over about 19% of zoom either side, each level's lines on their own places
on the plane so a fading level never shifts. A line both levels share is
drawn once; its colour and width blend between minor and major.

grid_step itself is unchanged, so sketch snapping, dash lengths and the
tools keep their spacing; the dominant drawn level is always grid_step's.
The viewport and the headless picture share grid_lines, so they still draw
the same grid.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Fade out the fine grid before a non-nested coarser level appears (#9570)

The levels go 1, 2, 5 times a power of ten. From 1 to 2 and from 5 to 10
every coarser line is also a finer one, but 5 is not a multiple of 2, so
cross-fading the 2 and 5 levels drew lines at 0, 2, 4, 5, 6, 8, 10 mm at
once, which looked restless.

At that switch the finer level's own lines now fade out over the first
half of the cross-fade and the coarser level's own lines fade in over
the second, so the two are never drawn together. The lines both levels
share (every 10 mm, the finer level's major lines) stay at full strength
throughout, so the grid never goes blank. The cross-fade spans the same
zoom range as before, and the nested switches cross-fade as they did.

grid_levels keeps its shares (adding up to 1, grid_step's level the
stronger one); grid_lines draws a line only one level has as strongly
as that level's own lines. The headless and viewport tests now check
half strength at the nested 5 to 10 switch and no 2 or 5 mm line right
at the 2 to 5 switch; a new test zooms through 2 to 5 in four decades.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 18:35:49 +00:00
froglemonade2andClaude Fable 5.1 441d67f9ff View cube and axis gizmo: a standard view centres and fits the model (#10091) (#10092)
* claim: #10091

* View cube and axis gizmo: a standard view centres and fits the model (#10091)

A new Navigation preference, "Fit the model after a navigator view change"
(`navigator_fit`, off by default): with it on, a face, corner or arrow of
the view cube and an axis tip of the gizmo look at the middle of the model
from the one distance that fits its bounding sphere, so Home, an opened
design and every view chosen on a navigator share one zoom and one centre
and only the direction changes. Off, both navigators turn in place as
before.

"Home and Fit size" (`home_fit_size`, 10–100 %, default 100 %) is how much
of the view between the panels and the controls the model fills when Home,
Fit, an opened design or a navigator view change frames it; 100 % is the
framing as before.

`view.navigate` takes an optional `fit: true` with a direction or a turn,
so programmatic callers get the same framing.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-10-31 18:34:13 +00:00
Colin Faulkingham ed66adac5c Keep renamed bodies visible when reusing hidden names (#10163) (#10175)
* claim: #10163

* fix(engine): preserve visibility when renaming into hidden names
2026-10-31 18:15:56 +00:00
Kyle a.k.a. TechSquidTV aeca117045 Sketch: offset chains lines whose corners are coincident (#5019) (#8858)
* claim: #5019

* sketch offset: chain lines whose corners are coincident, not only shared

Lines drawn one by one meet at their own points held by Coincident
constraints. The offset walked shared points only, so each such line was
offset on its own, to the left of the way it was drawn: a closed
rectangle came apart, both horizontals moving up. The same split shows
next to a fillet or chamfer, whose other corners stay Coincident pairs.

Chain ends held by a Coincident constraint as one joint, the way
Sketch::chain() and axis_implied already do, so a closed outline offsets
as one closed shape.

Fixes #5019.

* test(sketch): cover coincident offset loops after trim and blends

* refactor(sketch): share and cache coincident endpoint groups
2026-10-31 17:37:38 +00:00
Dahak BuildsandDahak Builds 31326e9898 Frames: renaming a cut-off piece of a frame member renames a different member after a rebuild (#10123) (#10132)
* claim: #10123

* Frames: a renamed cut-off piece keeps its own name through a rebuild (#10123)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 17:32:32 +00:00
Colin Faulkingham aa244bcee4 Fix copying drawn 3D sketch curves (#10134) (#10146)
* claim: #10134

* fix: copy drawn 3D sketch curves (#10134)
2026-10-31 16:53:47 +00:00
semmelrindeandClaude Opus 5.5 c392791f2c Sketch drag: a step that throws points far from the sketch, or presses a line to no length, counts as failed (#8600)
* Sketch drag: a step that throws points far from the sketch counts as failed

A held step of a drag that moved a point more than 1000 times the sketch's
size plus the drag's way was taken as solved, so a drag could leave points
around 1.4e6 mm away while reporting it reached the cursor. Such a step now
fails like one the solver cannot solve, and the cursor correction refuses it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch drag: a step that presses a line to no length counts as failed too

An end dragged past the point where its line would have to turn over (a
line held at its midpoint and by an angle, dragged past the midpoint; a
rectangle's corner dragged across the opposite side) pressed the line to no
length, where it has no direction left for its constraints. A step leaving a
line under 1/1000 of its length at the drag's start now fails like one that
throws points far away, so the drag stops just short of it (48 such drags in
4000 random sketches, none with this).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 16:45:35 +00:00
semmelrindeandClaude Opus 5.5 d95b8208b3 Sketch Fillet: a radius of half a side rounds both its corners (#2500) (#8238)
The second fillet of a side whose radius is half its length needs all
that is left of the line, and was refused as too large. Such a fillet
now takes the whole line: the line goes, the arc ends where the line did
and is tangent to the curve that goes on from there. A 20 x 10 rectangle
filleted with r = 5 becomes a slot, a 10 x 10 square a circle. Several
corners in one call keep their arcs by id, as removing a line renumbers
the curves.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 16:15:20 +00:00
semmelrindeandClaude Opus 5.5 99f8cff454 Sketch Fillet: a corner held by Coincident takes a fillet when a dimension measures to it (#7507) (#7778)
* claim: #7507

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Fillet: a corner held by Coincident takes a fillet when a dimension measures to it (#7507)

Before rounding a corner whose two lines meet only through a
Coincident constraint, Fillet and Chamfer weld the two points into
one, but not when anything else referred to the second line's point,
such as a dimension measuring to the corner: the fillet was then
refused ("the lines must share a corner point"). The point is now
welded as well, and what referred to it refers to the corner, the
same place. A point that a constraint names together with the corner,
or a linked point, is still not welded.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 16:15:04 +00:00
semmelrindeandClaude Opus 5.5 3292cba4ad Sketch Fillet and Chamfer: two lines that share no end are brought to where they meet (#6912, #7759) (#8426)
Two selected lines that stop short of each other or cross were refused
with "the lines must share a corner point". Now each line's end on the
shorter side of their meeting point moves there first (extending a line
that stops short, cutting a line that runs past), and the corner is
rounded or cut as before. Parallel lines, ends held by other geometry
and lines whose length is held are refused and change nothing.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 16:14:40 +00:00
semmelrindeandClaude Opus 5.5 6fa023b3ab Sketch Break: refuse an offset's curves, as Trim and Extend do (#8645)
An offset's ends follow its source curves on every solve, so a break's new
ends were pulled back: a broken offset arc came out in three pieces going
the long way round, and the solve moved curves the break never touched.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 16:14:14 +00:00
lewis2eandClaude Opus 5.5 510378d965 Sketch offset: an offset circle no longer reports a degree of freedom (#9264) (#9573)
The offset sets an offset circle's radius from its source after the solve,
but the solve still counted that radius as a free unknown, so a
dimensioned circle and its offset reported 1 DOF instead of 0. Lines and
arcs were not affected: the offset already holds their end points. The
solve now holds an offset circle's radius too.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 16:12:29 +00:00
PaddleStrokeandClaude Opus 5.5 6a4b5c90c8 Properties: measure faster, show progress, and stop when closed (#8706) (#8730)
* claim: #8706

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: measure faster, show progress, and stop when closed (#8706)

Properties on a large assembly measured every placed copy of every body
afresh (transform plus three fine tessellations each), so it took minutes.
#5203 (in #8103) already moved the measurement beside the window; this
builds on it.

- A rigid placement reuses the body's own cached measurement: volume, area
  and counts unchanged, centre placed, box from the placed corners (quarter
  turns) or from the body's shared mesh placed (other turns). Scaled or
  mirrored placements are still measured as placed.
- Bodies are grouped by component once and the subtree traversal groups
  occurrences by parent once (both were quadratic).
- The measurement beside the window is watched by a Progress: the card
  says "Measuring... n of N bodies" with a bar, and closing it (or
  switching designs) cancels the worker at its next body instead of
  leaving it running.
- component.properties and occurrence.properties are answered on a copy for
  control-channel requests too, as inspect.measure is.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: count the measuring work instead of timing it in the reuse test (#8706)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 16:04:38 +00:00
Colin Faulkingham 2e981d66e8 Sketch: allow dimension edits with tangent caps (#4823) (#9494)
* claim: #4823

* fix: resize sketches with tangent offset caps (#4823)
2026-10-31 16:04:29 +00:00
froglemonade2andClaude Opus 5.5 0476154973 Update Links: linked designs that changed while the tab was away come back as one undo step (#9743) (#9753)
* claim: #9743

* Update Links: linked designs that changed while the tab was away come back as one undo step (#9743)

Coming back to an assembly's tab read each changed link in an Update Links
run of its own, so each became its own undo step: one Undo took back one
component and left another copy of the same part at the new version.

component.update_links now takes `components`, a list, and goes on past a
design it cannot read: that link keeps its bodies, is named in `failed` and
gets a warning. The tab return sends one request with every changed link,
records as read only the ones that were, and says on the status line which
one could not be read.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 16:04:05 +00:00
Thodoris Tsagkogeorgas 5e265089c7 Sketch: offset corners trim when they cross and extend when they fall short (#10089)
The chain walk follows ends that share a point, a coincident constraint, or
the same position. The offset then meets at the intersection.
2026-10-31 16:03:31 +00:00
semmelrindeandClaude Opus 5.5 31a0c99a2c Delete: the delete runs with what its check computed ahead, instead of building the history again (#9917) (#10090)
* Delete: the delete runs with what its check computed ahead (#9917)

With the history rolled back, a delete builds the history after the
marker to see what it breaks, once in the check that runs off the window
thread (Session::ahead) and once more in the delete itself, on the window
thread. The check's results were lost on the way: the dry run's scratch
session and the whole-history copy dropped what the model keeps, and the
check's kept results never reached the delete. The scratch and the copy
now keep what their model keeps, and the delete (at once or after the
confirmation) runs with the check's kept results, so it finds the
history there instead of building it again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Delete: test that a confirmed delete runs with what its check kept (#9917)

With the history rolled back, deleting a side of the plate's outline is
checked off the window thread and confirmed first; the confirmation
carries the check's kept results, and the delete adds nothing to them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 15:19:57 +00:00
semmelrindeandClaude Opus 5.5 59efc86826 Rename Body: a pasted placement's body renames by the name the browser shows (#10017) (#10026)
* Rename Body: a pasted placement's body renames by the name the browser shows (#10017)

The browser lists the bodies of a component's second placement by their
placed names (`KB (K:2)`) and the context menu's Rename sends that name,
but body.rename looked it up only among the model's own bodies and
refused it ("no body"). It now takes a placed copy's name as the body it
shows, as appearance.assign does (#9740): the body is renamed in its
component, so every placement shows the new name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Rename Body: test renaming a pasted placement's body by its placed name (#10017)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Rename Body: the test also hides the copy first and undoes the rename (#10017)

A copy hidden by its placed name stays hidden under its new name, and
one undo brings both names back (checks from the review on #10026).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 13:48:14 +00:00
jyvikoandClaude Opus 5.5 94acc0c435 Sample test: one loop checks every sample builds cleanly and without a panic; the robustness copy goes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:26:58 -04:00
jyvikoandClaude Opus 5.5 6704d3094b Material tests: the nine copies in material_properties go; the persistence file checks the library copy's card and formats 20 and 21 in one loop
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:26:58 -04:00
jyvikoandClaude Opus 5.5 16bef10974 Shell regression: the saddle-corner shell opened on the top box's side has its exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:26:58 -04:00
jyvikoandClaude Opus 5.5 0d94d5f774 Pattern test: six chamfered holes take exactly five more holes' bore and chamfer rings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:26:58 -04:00
jyvikoandClaude Opus 5.5 321e567244 Engine tests: loft_cut goes; loft_spacing's hollow elbow covers its section counts and more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:26:58 -04:00
jyvikoandClaude Opus 5.5 e03c72a3e9 Robustness tests: lip_after_boss and hole_as_deep_as_the_plate live once, in the engine's tests.rs with exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:26:58 -04:00
jyvikoandClaude Opus 5.5 0e51ffbff6 Engine tests: lip_after_boss checks each lip's and groove's exact band, hole_as_deep_as_the_plate each hole's exact bore
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:26:58 -04:00
jyvikoandClaude Opus 5.5 e60cde8dcd Frames tests: a pick on a moved component or an instance removes the exact round and bore volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:26:58 -04:00
jyvikoandClaude Opus 5.5 697ea2ca85 Sketch scaling test: the first dimension sets l1 to 40 and scales both joined rectangles about the origin
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:26:58 -04:00
jyvikoandClaude Opus 5.5 8ec40d25e1 Surface fair test: the energy falls strictly, the face moves, and the edges are read after the fair
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:26:58 -04:00
Dahak BuildsandDahak Builds 34c378c063 Save As: rename the design to the new file's name (#4907) (#10036)
* claim: #4907

* Save As: rename the design to the new file's name when its name was borrowed (#4907)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 13:22:10 +00:00
jyvikoandClaude Opus 5.5 09bc14dbd8 Naming: test that a round of a round's end has no seam with that round's faces
The r1 round of a block's top edge, chained onto the end curve of the r2
round of its arc at a cylinder (rig fillets/every-block-cylinder-crease-
top-edge-after-arc-round-r1), ends where it runs into the cylinder. That
edge is no seam of the r1 round: the cylinder is a face of the r2 round,
not of the r1. blend_seams takes it for one today (the r2 round's name
F3:blend:F1:+z|F2:side holds a | of its own), and the rig reads it as a
contact seam at 60 degrees.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:04:03 -04:00
semmelrindeandClaude Opus 5.5 d4eeedbf95 Delete: in a rolled-back history, the check builds the history once when nothing breaks (#9917) (#9972)
* Delete: the check in a rolled-back history builds the history once when nothing breaks (#9917)

With the history rolled back, the check before a delete (which features
the delete would break) built the whole history twice, before and after
the change, with the marker removed. On a large design each build ran
every boolean after the marker: deleting twelve splines took half a
minute on the window thread. Only a feature that fails after the change
can be newly broken, so the history after it is built first, and when
nothing fails there the history before it isn't built at all.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Delete: test that the check in a rolled-back history still reports what breaks (#9917)

Deleting a hole in the plate changes the plate and every cut after the
marker and breaks none of them: the check reports nothing. Deleting a
side of the outline breaks the plate, and the check still says so, with
a cache too small to keep a state.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 12:29:30 +00:00
ashxddaga 7c013333db feat(engine,ui): allow restricting point-to-point align to chosen axes (#9946) (#10015)
* feat(engine,ui): allow restricting point-to-point align to chosen axes (#9946)

* style: apply cargo fmt across crates

* fix(clippy): use filter then map instead of bool::then in filter_map
2026-10-31 12:00:17 +00:00
jyvikoandClaude Opus 5.5 e6abea8097 Sketch projection: a free-form edge comes in as the one exact spline it is
A projected spline edge of several Bezier spans came into the sketch as one
curve per span (#1508), so a G2 round's bottom edge was 16 curves and a path
naming the corner named one span of it (#3604). The kernel now reads such an
edge (a spline, or an elliptical arc of several spans) as the one clamped
B-spline it is over the edge's interval, its knots and weights its own, and
the sketch takes it as one control spline whose ends sit on the edge's
vertices. Planar regions still read edges span by span. The 3604 case builds
with its original path and leaves KNOWN_FAILING.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 07:40:56 -04:00
jyvikoandClaude Opus 5.5 b16e8a5423 Sketch: a control spline can carry its own knots and weights
A sketch spline over control points was always the clamped uniform B-spline
over them, so a free-form edge whose knots are not evenly spaced (or whose
weights are not 1) could only come into a sketch as one curve per Bezier
span. A control spline now may save `nurbs`: its clamped knots and its
weights. Its points, polyline, exact pieces (one a knot span; conics for a
rational quadratic), the solver's distance and curvature, links, parallel
re-projection and inspect.sketch all read them; a loaded design's are
checked. One pending format file (spline-knots).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 07:40:56 -04:00
HiroKenEzandClaude Opus 5.5 8f259d5b83 Sketch: the Line tool can switch to a tangent arc and back without changing tool (#9489) (#9553)
* claim: #9489

* Sketch: the Line tool can switch to a tangent arc and back without changing tool (#9489)

With Preferences > Sketch > "Rest on a line's last point to switch to a
tangent arc" on (off by default), leaving the chain's last point and resting
back on it for 0.35 s makes the next click a tangent arc, by the existing
sketch.arc.tangent command, and the same gesture goes back to lines. A label
at the cursor says which. sketch.arc.tangent's end can now name an existing
point, so an outline drawn this way closes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: the cursor label names the command in words (#9489)

The label asked the catalog for a message id that doesn't exist, so it showed
the id. It now takes the command's translated label, and the test checks the
words it paints. Moved clear of the pointer's own badge.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 11:21:59 +00:00
semmelrindeandClaude Opus 5.5 a6b9d5a5b2 Browser: a sketch shown before an Extrude still hides once it is used (#9954) (#9971)
Show/Hide put every sketch it showed in `shown_sketches`, the list of
finished sketches kept shown although a feature uses them. Hiding and
showing a sketch nothing used yet put it on that list, so once an
Extrude used it, it stayed shown instead of hiding itself as a sketch
never hidden does. Show now marks only a sketch a feature already uses;
one nothing uses is shown anyway and leaves the list alone.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 11:19:34 +00:00