* Axes and points from circular edges and round faces
In 3D, a round edge or face stands for its circle wherever a command
takes an axis or a point.
Revolve, Surface Revolve, both Circular Pattern dialogs, Plane at Angle
and Move -> Rotate take a circular edge (through its centre, along its
normal) or a cylinder, cone or torus face (its axis). The features keep
the pick as a model reference, so they follow the model when a parameter
moves it. Straight edges work as before; flat faces are refused.
Every 3D point input takes a circle's centre: construction points (which
follow the circle), To Object, patch points, hole placement, and Move's
pivot and points. Hovering shows the axis as a dashed construction line
or the centre as a star, and the dialog's chip names what the pick
stands for ("centre of edge 10", "axis of face 3").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Format the round-pick hover check
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Selection chips: name a round pick as a circle centre or axis
The chip has room for little more than the body and a word or two:
"Shaft · circle centre", "Shaft · circle axis", "Shaft · face 2 axis",
and "Shaft · point" for a point of the model.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move: a circle's centre in a placed component is where the component shows it
Move's pivot and points read a picked circle from the model in its
component's own frame, while the pick is in the world. They now read it
from the world state (and, editing a Move, from the state before it,
placed the same way), as the viewport and the other round picks do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Plane at Angle on a planar face about a model edge: test that it follows both
Upstream #1956 made a planar face a base for Plane at Angle; this branch makes a model edge an
axis. The rebase keeps both in one PlaneRef::AtAngle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: a Weldments ribbon tab (#4003)
- WELDMENTS joins the ribbon after SHEET METAL and is built the same way:
Sketch (New Sketch), Create (Frame Member) and Configure (Parameters,
Configurations). Frame Member's home moves there from MODEL > Create.
- Always shown, as a frame starts from a sketch of its lines. It selects
itself and takes the contextual style when the selected body (or the last
body of the active component) is a frame member; sheet metal comes first.
- It uses the default accent until the palette has a colour for it.
- The tab label is in every catalog; docs/ribbon-layout.md, docs/frames.md
and the tab list in docs/control-protocol.md follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: Weldments keeps the ordinary tab look (#4003)
Weldments still selects itself when a frame member is the active body, but
no longer takes the solid contextual fill or the 2 px accent line under the
tab row: selected, it looks like a selected Model tab. Only Sketch and Sheet
Metal (on a sheet body) are contextual.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: a number and its unit are one value (10 mm / 2 mm is 5)
A unit written after a number was multiplied in at the precedence of `*` and
`/`, so `10 mm / 2 mm` was (10 mm / 2) mm = 5 mm² and `90 deg / 1 rad` a value
in angle², reported as a unit error. The number now takes the unit after it
before `*` and `/` apply; a fraction of numbers before a unit stays one value
(`1/2 in` is half an inch), and an exponent stays a plain number (`2^3 mm`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: after a division, a fraction before a unit only when closed up
`width / 10 / 2 mm` read the `10 / 2 mm` as the fraction 5 mm and gave
width / (5 mm) = 8 instead of (width / 10) / 2 mm = 2. After a `/` the
fraction rule now needs the fraction written without spaces (`1 in / 1/2 in`
is still 2); elsewhere `1/2 in` and `10 / 2 mm` are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
?open= now also accepts an absolute path on the page's own origin, fetched
with the page's scheme, so a self-hosted setup that serves SolidCraft and
other tools under one origin can link a design on a LAN without a public
HTTPS address. Absolute URLs keep the HTTPS-only rule (a URL on the page's
own origin is also accepted), redirects must end on HTTPS or the same
origin, and protocol-relative, dot-segment, backslash and control-character
values are refused.
* claim: #3538
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Updated AppImage takes the release's file name (#3538)
A versioned AppImage name (solidcraft-<version>-linux-<arch>.AppImage) is
replaced by the new release's name, so zsync-based tools keep finding the
update data. Other names are kept.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #6558
* Shortcuts: Ctrl+Shift+S opens Save As in the workspace (#6558)
The Home page already opened Save As with Ctrl+Shift+S, but the design workspace matched Ctrl+S, so the chord saved over the current file instead of offering another one. The workspace now routes the chord to Save As, and the File menu shows that shortcut next to Save As, taken from the command registry.
* claim: #5679
* Top-level cut and join reach bodies in sub-components (#5679)
An extrude, revolve or press-pull from a sketch on a face of a body in a
component inside the active one now cuts or joins that body, moved or
turned, in its own component, so every placement shows the change. The
automatic operation probes that body where it is shown. A linked part, or
a face on a further placement of a part placed more than once, is refused
with the reason instead of a silent no-op (#5678).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5853
* Batch: refuse a step that would fail at its turn before the first step runs (#5853)
engine.batch and the MCP batch tool checked only a batch's shape up
front. A misspelled command id in a late step was found at its turn,
after every earlier step had run, and then all of it was rolled back: a
160-step batch with a typo as its last step ran for a minute and
changed nothing.
solidcraft_engine::batch_preflight::check finds, before anything runs,
the first step the batch would certainly refuse at its turn: a step
without a command, an unknown command id (the error names the closest
ids, as at the step's turn) or, with strict parameter checking, a call
that breaks its command's typed contract. Anything that depends on the
design is left to the step's turn.
- engine.batch (control channel) checks against the app's registry and
its session's level; view.pick, which the app answers itself, passes.
- The MCP batch tool checks when the commands run in its own process
(headless, with --param-check from the backend). A running app may be
another version with other commands and checks the batch itself; its
reply's not_run is passed on.
- The refusal is the failing step's reply with completed 0, undone 0,
not_run listing every step and a note.
Tests that used an unknown command only to make a late step fail now
use a step that fails at its turn (a bad extrude distance), so they
still test rollback, timings and file.new as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6646
* Control channel: document.revision, a design revision and a document id (#6646)
A program that follows the open design asks document.revision and exports
only when the answer moves: document_id names the open design (kept through
edits, saves and renames, another for each design started or opened, never
shared between two tabs or two runs) and revision moves whenever the design,
what is hidden or an uncaptured component position changes. It stays put on
reads, selections and view changes, unlike the session's view revision.
The revision is read lazily: the session remembers the design it last
reported (held weakly, so Arc::make_mut can never change it in place and its
address can't be reused) and takes a new number from one counter for the
whole run when the design is another one. The control method answers at once,
also while a slow command computes; engine.execute reaches the same command
for scripts and MCP.
* document.revision: hash the run's id prefix with the process's random keys
A clock set before 1970 gave every run the prefix 0, so a restarted app could
answer a new design with the id and revision of the old one. The docs no
longer promise an answer at once: a screenshot waiting for an opened design to
be meshed still holds the requests behind it.
* document.revision: its label in the complete catalogs (ja, zh)
* claim: #6985
* Control channel: control.subscribe and design.changed events (#6985)
A connection that sends control.subscribe gets the active design's id and
revision in the reply (as document.revision answers), then a
{"event":"design.changed","params":{document_id, revision}} line whenever
either changes, so a live link need not poll.
The window publishes the design at the end of each frame's logic and
drawing while a connection is subscribed (one atomic load otherwise). Each
subscribed connection waits on that from a thread of its own and writes
the latest after a 100 ms gap, so a burst of changes is one line. Replies
and events share one lock per connection, each written whole (#6390).
* control.subscribe: the reply before any event, a second one refused
The events thread started before the subscribe reply was written, so a
change right after the window's answer could reach the client before the
reply that named the older revision. The subscription now starts holding
the connection's line lock and writes the reply under it.
A second control.subscribe on a subscribed connection is refused on the
connection itself: its answer could arrive behind a newer event. When no
thread or socket is left for the events, the reply says it did not
subscribe instead of ok.
* control.subscribe: a second one does not lose a finished late reply
The already-subscribed answer came before the busy check, so a request that timed out and had finished since lost its reply: control.pending then said the app ended it without one. It now comes after the busy check and drops a finished late reply as every other request does.
* control_server: declare the subscribe guard at the top of the loop
Clear of the lines #6643 changes (its token check moves to where the declaration was).
* control_server: the subscription's items beside serve
Away from the lines next to send, where #6643 adds token_of.
* control test: New on a blank design reuses its tab, so redo the box first
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
The catalogue entry Quantity served both the pattern dialogs' number of
instances and the motion study's plotted quantity. Nine locales had
translated the second meaning, so the rectangular pattern dialog showed
e.g. "Größe" above "Anzahl 2" in German.
The motion study's row now reads motion.plot_quantity (a pending file
that keeps every locale's previous word there). Quantity takes each
catalogue's own ui.quantity text, which the "Quantity 2" row already
shows; nothing is newly translated. The glossary lists Quantity under
words with more than one meaning.
Fixes#6538
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: on Windows, give claude mcp add the CLI's full path (#5895)
The Windows installer puts solidcraft-cli.exe in C:\Program Files\SolidCraft but not on PATH,
so the README's and docs/mcp.md's `claude mcp add solidcraft -- solidcraft-cli mcp` registers a
server that can't start there. Say so next to the command and give the full-path form.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: word the Windows full-path note so it holds once the installer sets PATH (#5895)
#5898 makes the MSI add its folder to PATH. Say "if a terminal doesn't find solidcraft-cli
(older Windows installers don't put it on PATH)" instead of stating that the installer never
does, so the note stays true whichever change lands first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the Windows CLI path is the default, not the only place (#5895)
The MSI installs to ProgramFiles6432Folder and lets people choose the folder
(WixUI_InstallDir), so C:\Program Files\SolidCraft\ is only the x64 installer's default; the
x86 MSI on 64-bit Windows lands in C:\Program Files (x86)\SolidCraft\. Say "by default" in
the README and docs/mcp.md (review on #5896).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
SolidCraft runs through XWayland whenever an X display is available. A
compositor that doesn't let X11 apps scale themselves draws the window at
100 % and stretches it. docs/nix.md said so only for fractional scaling,
but GNOME 47 (RHEL and Rocky Linux 10) does it at any scale: the report
shows 1.05 physical pixels per point at 200 %.
The troubleshooting page gets a section with the cause, the Window system
preference, SOLIDCRAFT_WAYLAND=1 for 0.21.0 and earlier, and the file drop
trade-off; docs/nix.md links to it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5734
* Docs: don't offer winget install before the package is in winget-pkgs (#5734)
The README and docs/downloads.md said Windows users could run
`winget install bherbruck.SolidCraft`, but winget-pkgs has no manifests for
bherbruck.SolidCraft (manifests/b/bherbruck doesn't exist), so winget finds
no package. winget.yml only updates a package that is already listed, and
does nothing until then. Drop the command from both pages, and say in
docs/releasing.md that the first version has to be submitted once by hand
and the command added back when it's listed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Releasing: a first WinGet submission is already open; take it up (#5734)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Saving into Documents fails with the Windows dialog's "File not found" when
Controlled folder access blocks the app, and the message gives no hint.
Refs #4479.
* claim: #4640
* Docs: AppImageLauncher 2.x can't start the AppImage; update to 3.0 (#4640)
AppImageLauncher 2.x intercepts every AppImage through binfmt_misc and
can't start static-runtime AppImages such as SolidCraft's: it fails with
"execv error: No such file or directory" after a FUSE message. 3.0 starts
it. One paragraph in the Linux AppImage section says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: AppImageLauncher 3.0 is so far only published as betas (#4640)
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
* claim: #4851
* User guide: local models with the Assistant (#4851)
A page on choosing and setting up a local model (Ollama, LM Studio, or any
OpenAI-compatible server) for the Assistant: tool support, VRAM, permissions,
the measured results from the standard test in #4851, and troubleshooting
for the common failures.
* Guide: local models table with the full set of measured results
Point to the `<file>.bak` copy every save keeps, the design.solidcraft in crash
reports, the recovery folder for unsaved designs, and how to attach the file
to an issue.
* Roadmap: a short user-facing ROADMAP.md, developer detail moves to docs/roadmap-detail.md
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Roadmap: feature milestones with progress counts, daily releases through the in-app updater
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Roadmap: count issues as pieces, show work built on the drawings and render branches
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4846
* Assistant: say so when a turn ends without using SolidCraft's tools
When tools were offered and a completed turn made no tool call and no
change, the chat panel shows a short notice pointing to tool-capable
models: always for an empty reply, and for a text-only reply to an
explicit edit request. Plain answers to questions stay quiet. The
control channel exposes it as turnWarning.
* Fix the Anthropic loop test for the tools event; add ja and zh for the no-tool-call notice
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Every new command comes with input and output schemas
A test fails for a command without a contract or an output type, unless it is a planned!
placeholder or listed in schema/unconverted.txt, which holds the 400 commands that predate
the rule and only shrinks: the test also fails when a listed command has its schemas, when
the list names a command that doesn't exist, or when it isn't sorted.
`checked!` now takes only the command's id and checks the contract that id publishes
(`run_checked_as`), so the contract enforced is always the one described. Another test runs
every command that has a contract in strict with an unknown key, so a contract is never
published without `checked!`, under the command's own id, enforcing it.
A new book page, Command schemas, explains how to write a contract and a reply type, the
tests to add, the shared field types and how to add one, with a checklist; the failure
messages point to it. "Adding a command", CONTRIBUTING.md and AGENTS.md now include the
schemas, and the MCP tool description and docs/mcp.md no longer list the converted commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* List the commands added on main since: view.layout, view.history_layout, view.normal_to
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Command schemas guide: what participants and targets do, checking the evaluation, warning-free replies
- `participants` changes the result for some features and nothing for others; where it and
another key override each other, or where it has no effect, say so in that key's
description or in the summary.
- The example primitive's `targets` default to every body in the feature's component, not the
bodies it meets; they're ignored when `participants` lists bodies.
- Check what each value does where the feature is evaluated, not only how the handler reads it.
- A reply test runs every form in Warn and checks for no `param_warnings` (Strict for a reply
that isn't an object).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* List the 43 commands added on main since: frame, component, render and others
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* List the 11 commands added on main since: browser folding, standard views, parameter sweep, path flange
browser.collapse_all, browser.expand_all, inspect.parameter_sweep, sheet.path_flange and the
seven view.* standard views (back, bottom, front, isometric, left, right, top) landed on main
without schemas; the gate flags them, as intended. 457 commands listed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Schema rule warns instead of failing for now
A command without input and output schemas prints a warning listing it
(test output and a CI annotation). SCHEMA_RULE_STRICT in coverage_tests.rs
(or SOLIDCRAFT_SCHEMA_RULE_STRICT=1) makes it fail again. Docs say "should,
and will become required".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #4146
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport theme: a light 3D view in a dark window, and the reverse (#4146)
Preferences › Interface › Theme gets a Viewport row under the theme tiles:
Follow theme (the default, as before), Light or Dark. Light or Dark draws
the 3D view in the built-in Light or Dark theme's colours whatever the
window uses, so a dark window can show the model on a light view and the
other way round; it works with every theme, theme files included.
The view takes the background and grid, bodies, selection and hover, the
origin, previews, sketches with their dimensions and glyphs, the navigation
cube and triads, box selection and the analysis colours. Panels, dialogs,
menus and the chips over the view keep the window's. Text and warnings drawn
straight onto the view (the sketch status line, the loose-end and midpoint
markers, the section's cut outlines, the 3D sketch tool and the sketch tools'
previews) take the view's side, so they read on its background.
theme::ViewportTheme is the setting (saved as `viewport_theme`: theme, light
or dark; an unknown saved value reads as Follow theme, as ColorVision's
does). Tokens::get() takes the view's colours from the other side only when
the view's dark or light differs from the window's; Tokens::view() is the
view's side for colours drawn onto it. The ground shadow follows the view
(the scene and highlight caches already key on the colours themselves),
ui.render draws in the view's colours, and ui.prefs takes `viewport_theme`
and reports `viewport_dark`. An older release ignores the setting and draws
everything in the theme.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport theme: follow the single set of axis colours
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #754
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Sketch Dimension: arc length from an arc and its end point (#754)
The arc-length dimension existed (sketch.dimension type arc_length) but
the Dimension tool could only give an arc its radius. An arc and one of
its own end points, in either order, now dimension the arc's length:
click the arc, then its end. The pair was refused before ("cannot
dimension that combination"), so no existing result changes. A point
where the arc's end is (a coincident line end) counts as that end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4846
* Warn when Ollama models lack tool support (#4846)
Check Ollama model capabilities in the background and cache results per
endpoint and model. Show an advisory warning for models without tools,
expose it through ui.agent_chat, and document the behavior.
Cover capability parsing, warning selection, background probing, caching,
and selection changes with synthetic regression tests.
* Keep the Ollama capability probe out of the web build
The panel never calls it there, so it would only be dead code.
* Wrap the model warning instead of cutting it off
In a narrow panel the end of the sentence, the part that says what to do, was truncated.
* Fix AgentConfig default after rebase onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the Ollama no-tools warning into a pending locale file with ja and zh
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2348
* Open linked designs from assembly browser
* claim: #2348
* Test linked design action with multiple components selected
* Fix linked design lookup in browser storage and translate its menu action
* Add Turn Up Axis to complete UI catalogs
* Keep browser DXF download after linked-design checks
Search Console lists docs.solidcraft.io/, /introduction.html (the same page) and /guide/mcp.html as duplicates without a user-selected canonical. The Pages build now adds a canonical link to every book page (index.html and introduction.html both name /), skips the redirect stubs that already have one, marks 404 and the toc frame noindex, and writes a robots.txt pointing at a generated sitemap.xml.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #976
* One set of X, Y and Z colours for every axis (#976)
The origin axes, the navigation cube's triad, 3D sketch triads and joint
origins drew `axis_x/y/z` (255,0,0 / 0,255,0 / 2,2,248), the view triad and
the headless picture drew `triad` (220,60,60 / 60,170,60 / 60,100,230) and
the Move gizmo drew `gizmo` (225,70,60 / 80,190,80 / 70,130,240). The
`triad` and `gizmo` tokens are gone: every axis reads `axis_x/y/z`, now the
view triad's values (the engine's `view::colors::AXIS_*`, so headless
pictures are unchanged, and the set the red-green table was measured for).
Older theme files' `triad` and `gizmo` lists still read and set the axes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: refresh every UI screenshot, GIF and video from the current UI
Re-record the README demo, the rover build, the sample plate and the class-A surface pictures
with 0.22.1 in the default dark theme. The demo script is fixed for the current sketch dimension
boxes and MCP file limits, and the rover replay and class-A pictures now have scripts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: cut the idle time out of the demo and rover recordings
The README demo plays at 6x and the rover replay at 15x with a constant-rate camera orbit, with the stretches where nothing on screen changes cut out by the new trim_idle.py.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4544
* Add Norwegian Bokmål translation
* Refresh Norwegian Bokmål translations against current main
* Drop Norwegian messages whose ids are no longer in the English catalogue
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Themes: Okibi (dark) and Akari (light), from the Okibi design system
Two built-in themes mapped from the Okibi design system v1.8
(https://kaievns.github.io/okibi-akiri-design-system-spec/): cool charcoal
ash with a single ember accent, and its warm-paper light twin. Every one of
the 156 colours is set, so nothing falls back to the Dark or Light palette.
* Give the Okibi and Akari themes an icon palette
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
When an agent's models come from several providers (Hermes and OpenCode
name each one "Provider · model" or say "Provider: ..." in its
description), the chat header shows a provider drop-down before the model
drop-down, and the model drop-down lists only that provider's models
without the provider in front. It opens on the provider of the model in
use; picking a provider alone changes nothing. ui.agent_chat takes
provider and reports providers and provider.
* claim: #3983
* Agent skill for reproducible bug reports (#3983)
skills/solidcraft-reporting has an agent gather the version, steps and
exact error, reproduce the problem in a fresh design (a command script or
one batch with rollback off), shrink it while it still fails, check the
numbers with measure and a screenshot, keep private designs out, search
for duplicates, and write the report in one shape: Reproduced on, Steps
with a minimal script, Expected, Actual, Attachments.
Listed in skills/README.md and docs/mcp.md; the bug template's steps
field points agents to it. The skill-name check now covers its files.
* Reporting skill: GitHub takes a design only as a .zip
amolinari-autotex
github-actions[bot]
Nathan Dane
froglemonade2andClaude Opus 5.5
Karl Von RichterandClaude Opus 5.5
ivisafandClaude Opus 5.5
Victor Santos Oliveira
raykholo
rlartotandClaude Sonnet 5.5
Colin Faulkingham
Dahak BuildsandDahak Builds
Homero Thompson
HiroKenEzandClaude Opus 5.5
Mateusz SychandMateuszSychXpl
FrankandCopilot
Lars Jansen
ThoschandClaude Opus 5.5
Badger BandClaude Opus 5.5
DuBearteandClaude Opus 5.5
bherbruckandClaude Sonnet 5.5
leValdemar19andClaude Opus 5.5
ChrisNo
ABDULLAH