* claim: #3133
* Apply complete feature transactions off the window thread
Evaluate dependent history and prepare reference and GPU display caches before accepting a guarded result. Preserve the evaluated original model for safe editor cancellation and journal only accepted commands.
* fix(ui): preserve original marker across sketch-to-feature edits
* test(ui): verify edit-sketch cleanup and guard Unix link fixture
* test(ui): fix texture disposal and unreachable assertion in feature tests
* fix(build): compile CLI link inspection only on Unix
* Axes and points from circular edges and round faces
In 3D, a round edge or face stands for its circle wherever a command
takes an axis or a point.
Revolve, Surface Revolve, both Circular Pattern dialogs, Plane at Angle
and Move -> Rotate take a circular edge (through its centre, along its
normal) or a cylinder, cone or torus face (its axis). The features keep
the pick as a model reference, so they follow the model when a parameter
moves it. Straight edges work as before; flat faces are refused.
Every 3D point input takes a circle's centre: construction points (which
follow the circle), To Object, patch points, hole placement, and Move's
pivot and points. Hovering shows the axis as a dashed construction line
or the centre as a star, and the dialog's chip names what the pick
stands for ("centre of edge 10", "axis of face 3").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Format the round-pick hover check
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Selection chips: name a round pick as a circle centre or axis
The chip has room for little more than the body and a word or two:
"Shaft · circle centre", "Shaft · circle axis", "Shaft · face 2 axis",
and "Shaft · point" for a point of the model.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move: a circle's centre in a placed component is where the component shows it
Move's pivot and points read a picked circle from the model in its
component's own frame, while the pick is in the world. They now read it
from the world state (and, editing a Move, from the state before it,
placed the same way), as the viewport and the other round picks do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Plane at Angle on a planar face about a model edge: test that it follows both
Upstream #1956 made a planar face a base for Plane at Angle; this branch makes a model edge an
axis. The rebase keeps both in one PlaneRef::AtAngle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: a number and its unit are one value (10 mm / 2 mm is 5)
A unit written after a number was multiplied in at the precedence of `*` and
`/`, so `10 mm / 2 mm` was (10 mm / 2) mm = 5 mm² and `90 deg / 1 rad` a value
in angle², reported as a unit error. The number now takes the unit after it
before `*` and `/` apply; a fraction of numbers before a unit stays one value
(`1/2 in` is half an inch), and an exponent stays a plain number (`2^3 mm`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: after a division, a fraction before a unit only when closed up
`width / 10 / 2 mm` read the `10 / 2 mm` as the fraction 5 mm and gave
width / (5 mm) = 8 instead of (width / 10) / 2 mm = 2. After a `/` the
fraction rule now needs the fraction written without spaces (`1 in / 1/2 in`
is still 2); elsewhere `1/2 in` and `10 / 2 mm` are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Patterns: one before the feature it copies follows that feature's parameters (#6726)
A pattern or mirror of features made with the timeline rolled back comes
before its sources and replays them from their definitions. Its
fingerprint chained only the features before it and its own inputs, so a
change of a source's parameter left its result in place: the box grew,
its copy kept the old length, also after rolling forward.
The chain fingerprint of a pattern or mirror of features now also takes
the fingerprint of each feature it replays (and of their sources, for a
pattern of a pattern), wherever they are in the timeline.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Patterns: a test for a later feature taking a deleted source's name (#6726)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Patterns: fingerprint the replayed sources with the document, as fingerprint now takes it (#6726)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3812
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Sketch Dimension: value box in the design's units (#3812)
A dimension added without a value restated what it measured as
"<value> mm", whatever the design's units. In an inch design the
Dimension tool's value box therefore opened at "25.4 mm" next to a
dimension whose text read 1.000 (inches).
Document::design_length writes a measured length in the design's units
("1 in"), with enough decimals to keep it to the micrometre, so a
dimension that restates the geometry still moves nothing. The Dimension
tool, AutoConstrain's dimensions and Toggle Driven (making a driven
dimension driving) use it. Millimetre designs are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Move the design-units dimension tests into sketch_ux_tests (review)
The #3812 tests go in the existing sketch dimension test file rather than
a new file of their own (AGENTS.md, #3226).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The evaluation cache's 64 MB budget charged every cached feature result the whole model, though a
state shares every body it did not change with the state before it. A design whose model is a few
MB kept only its last few dozen results, so setting a parameter back recomputed what had dropped
out. Each result is now charged for the bodies and sketches it does not share with the state it
started from.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6600
Co-authored-by: Cursor <cursoragent@cursor.com>
* Save an imported mesh that only fits after compression (#6600)
The design file limit was applied to the mesh before Deflate, so a mesh
that had already loaded could not be saved or autosaved.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix: validate and version large mesh saves (#6600)
---------
Co-authored-by: Colin Faulkingham <colinfaulkingham@Colins-Mac-mini.local>
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #6841
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Sheet metal: a pattern of a cut made in the flat is kept like the cut (#6841)
A rectangular, circular or path pattern of an extrude cut through sheet metal was refused
("this sheet machining cannot be preserved in its flat material"), though the cut itself is
kept as a cut-out of the flat pattern. The pattern replayed its copies through the generic
boolean, whose sheet check refuses any change the sheet model can't keep; the cut goes through
the sheet's flat machining first.
Each copy of an untapered extrude cut is now machined into the sheets the same way, in its
moved sketch plane (a moved copy keeps the extrude's prism certificate), and then cut from the
other targets. A copy that meets a folded bend is refused as the cut is there. Mirrored copies
(the sketch plane turns over) and patterns of an intersect (which cut with the union of their
copies) keep the generic path.
Fixes#6841.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6211
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Joints: a loop whose axes are a hair out of parallel still moves (#6211)
Holes picked on parts are rarely exactly in line. A closed loop through
axes a few hundredths of a microradian apart (a lever, link and a rod on
a cylindrical axle) can't close exactly: it closes to nanometres, and the
gap grows as it turns. The loop solver wanted 1e-7 mm, so it threw such a
closure away (the loop stayed open, its parts at 0 dof) or stopped a drive
or drag after a fraction of a degree.
The conflict check is now 1e-4 mm / 1e-6 rad (it was below what its
message can show), and joint.drive / motion and joint.reach close the
loop at each step as at the start: to the tight tolerance where they get
there, otherwise within the conflict check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2175
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Body rename: an imported assembly's other bodies keep their names and components (#2175)
An Import keeps its body names by the file's body index, and builds no body for the
file's later instances of a repeated part (`skip`). Renaming a body stored the names by
the body's place in the model instead, so every name after the first skipped instance
landed one slot early (and the new name could land on a skipped slot). The rename looked
right until the design was rebuilt; then those bodies took other names, dropped out of
their components and showed up loose in the import's top component.
`Feature::body_name_slots` maps the bodies a feature builds to their stored slots, and
`Feature::pin_body_names` stores current names through it. The rename, the pinning of
later features' names (rename and suppress) and `Document::body_rename_from` use them.
Fixes#2175
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #1994
* plastic.snap_fit: base_height and new_body options (#1994)
Base Height extends the snap fit's base below the picked face; New Body
makes the snap fit its own body so it can be patterned or moved. Both
optional, serde-defaulted, old designs replay identically.
* ui: snap_fit length-field defaults list gains the optional base height
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
A feature's face points are moved onto their named faces before it is
evaluated, so a To Object extrude follows its target face when an earlier
feature moves it. A pattern's or mirror's copies were built from the
feature as stored, with the face where it was picked: after a gear's disc
was made thicker, the tooth reached the new top but its pattern copies
kept the old height. The copies now use the same moved points; the move
is one helper used in both places.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: sketch Intersect keeps its exact cuts, crosses curved faces on the surface, cuts on a top face
Intersect's cut of a box, a cylinder, a sphere and a tilted cylinder, as it is on main, pinned.
Two cases where it is not exact: a plane through a cylinder's rim cuts the mesh's chord (its sides
come out at 6.3159 and 6.3085, not the square root of 40; a hole's walls at 25.0122), and a plane
on a body's top face finds nothing ("projects to nothing on this sketch plane").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Sketch Intersect: crossings on curved faces lie on the surface; a plane on a top face cuts it
Problem: the plane cut that sketch Intersect makes of a body's mesh (project::section) took a
crossing on an edge where a curved face meets another (a cylinder's rim on its cap) from the
merged normals, which are undefined at the crease, so it fell on the chord: a cylinder's sides came
out 0.01 mm off and uneven. A plane through a vertex or on a face counted the vertices on it as
below, so a plane on a body's top face crossed no edge and found nothing.
Solution: the crossings are found by section_segments, which section fits as before: an edge where
a curved face meets another takes the curved face's normals, so the crossing lies on its surface;
a vertex within 1e-9 x the mesh's size of the plane is on it, on one side for every edge (below
when the mesh lies on or above the plane, else above), and an edge ending there crosses at that
vertex, which is an exact point for the fit. Each segment keeps its B-rep face, for a section that
groups them by face. Cuts that were exact are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The component colour tests no longer assume a design always carries a list of
pending format changes; once the release folds them, there is none.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Joint dialog kept a round edge (a hole's rim), a straight edge and a
corner as plain points where they were picked. When the part got thicker,
a hole moved or the part got longer, the origin stayed where it was and
the jointed part overlapped the other one. An edit that left the picked
spot where it was (lengthening an arm away from the jointed hole) looked
fine, which hid it. Faces and hole walls were already found by name.
The dialog now sends a round edge as its circle's centre with its z, and a
straight edge or corner as an edge pick with its z. The engine keeps them
by name (the round end by its wall and the face across its rim, the edge
and corner by their edge and face names), with the frame the pick showed;
where it can't (no planar face beside the edge, no names), it keeps the
point as before. Edge origins get an optional axis (along the edge, or a
fixed direction) so a hinge on an edge keeps turning about it.
Tests: every joint type and as-built, for each way the dialog picks an
origin, with the arm made thicker, its hole moved and the arm lengthened,
inside one design and through Update Links.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: surface bodies get the surface icon in the Bodies folder (#4165)
Every row in the Bodies folder had the solid body icon, so a surface (an
open shell, such as a Surface Revolve of an open curve) looked like a
solid. A body whose shell does not close now shows the existing surface
icon; solids keep the body icon.
Body::is_surface walks every shell's edges, so ModelBody caches it once per
body (shared by clones, like outline_bounds) instead of the browser
checking it every frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add the surface icon to the requested-icons manifest
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* feat: add colored components inspection toggle
* feat: persist component colors and add cycling controls
* feat: assign component colors in creation order
* fix: update component color menu integration and translations
* fix: proper description for pending format change.
* fix: deleted duplicated format change description from docs/pending.
* Compare the component colour counter in the features-only check
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Vadim Kalinsky <vadim@kalinsky.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: a text's words follow its text parameters, and so does its cut
A sketch text whose words are an expression of text parameters (`Label + '-L'`): a parameter edit
and a configuration row that sets the parameter relabel the text, the text's cut follows, and the
expression is saved with the design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Text parameters: a sketch text's words built from them follow every change
A design's parameters are numbers; a text's words (a part label, a size code) could only be typed.
Text parameters hold words: `parameters.add` or `parameters.change` with `unit: "text"` (the
expression is the text, quotes optional), and `sketch.text` and `sketch.edit_text` take
`text_expression` (quoted texts and text parameters joined by `+`, `Label + '-L'`) instead of
`text`. The text is laid out anew from its expression on every evaluation, so a parameter edit,
a configuration row or a script relabels it and the features built on it (a cut, an emboss)
follow in the same rebuild. The design file keeps the text parameters and each text's expression
(one pending format change); a configuration table's parameter column can be a text parameter;
the Parameters dialog lists them under the unit `text`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Text parameters: the joints' same-but-features check compares the text parameters
The joints are solved once per change unless the design differs only in its features
(same_but_features, #6372), which names every Document field. The text parameters are a
field of their own and change what a text's words evaluate to, so two designs that differ
in them are not the same but for their features.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5860
* Doc: stop the names of split faces from growing with every split
* Joints: the long-piece-name test takes the longest name a piece now gets
Split-face names are bounded at 512 bytes since #5860, so the test cannot
build one over 512; it takes the longest the history gives.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6392
* perf: apply a joint solve with indexed joints and occurrences
Every change to a design re-solves its joints and applies the solution. Applying it searched
the joints for each value and, for each occurrence the solve places, searched the occurrences
for it and walked its parents' first occurrences by searching again.
Joints and occurrences are now indexed once, keeping the first of each id as the searches
found it, and the parents' transform is read through the index as the loop leaves it
(component_transform shares the walk, transform_through).
Synthetic design, headless (2000 components at the root with one component inside each, 4000
joints, a solution placing every occurrence): apply 14.1 -> 2.2 ms (median of 12).
The new test applies a solution that moves a component and the components inside it, and
checks each lands where the solution put it, read through its parent as the loop has just
moved it.
* claim: #5329
* Update Links: show which linked design it reads, off the window thread (#5329)
Update Links read and rebuilt every linked design on the window thread, so the
window froze, with nothing on screen, until it finished. From the toolbar it now
runs as a file operation: off the window thread, with the overlay naming the
linked design being read (cover (2 of 3)), its rebuild step and progress, and
Cancel. The assembly stays as it was until the update is in, and it lands as one
undo step. The command reports each design through doc::progress::item.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5938
* Edge flange: height measured from the outer sharp, the inner sharp or the bend tangent (#5938)
An edge flange feature takes height_from (outer, inner or tangent) in sheet.flange and Height From in the Flange dialog, saved only when it is not the outer sharp. A height shorter than the bend takes is refused with the smallest height that fits.
* Edge flange: material outside and tangent bend positions (#5941)
An edge flange's position can now be material_outside (the inner virtual sharp on the edge) or tangent (the bend's outer face tangent to the edge's face), in sheet.flange and the Flange dialog. The bend starting at the edge was already the outside position, which now also answers to bend_outside.
Every command in a design with placed components places their bodies
again on up to 16 threads, though nearly all of them are taken as they
were placed before (the same body by the same matrix). Those are now
taken on the calling thread and only the rest are placed on threads.
Warming the meshes (and display plans) of a state likewise starts
threads only for the bodies that have none yet.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4094
* Sheet metal: Path Flange, a chain of bends on an existing sheet edge (#4094)
Path Flange (`sheet.path_flange`): sketch an open chain of lines across a sheet edge, pick the
edge and one line; each line becomes a flange as long as the line and each corner a bend, one
feature and one body. The edge flange takes further bends (`then`), each on the far edge of the
one before, and the Flange dialog shows them as rows with a bin each.
* claim: #4968
* Sheet metal rules: bend angles as the included angle (#4968)
A sheet metal rule's angle_display (bend, the default, or included) sets
how the DXF bend notes read each bend: a 58° bend is B1 UP 122° R1 under
an included rule. The bend table always gives included_angle_deg beside
angle_deg (CSV and JSON). Set in sheet.manage_rules and the Sheet Metal
Rules dialog, listed by sheet.rules; the flange angle stays the bend angle.
* Bend table: the included angle as the CSV's last column, so the columns before it keep their places (#4968)
A test also covers a body whose base flange names its rule, which keeps that rule's notes whichever rule is active, and a bend down.
* Sheet Metal Rules: Angle Display reads Bend or Included, so the choice fits its box (#4968)
The rule editor's row contract lists the new row and the key the dialog sends.
---------
Co-authored-by: begsaquib <saquibbeg4444@gmail.com>
* Sketch Dimension: point or circle to the edge of a circle or arc (#4064)
Adds PointCircleDistance and CircleCircleDistance (edge-based, like #1863):
solver, constructive seed, drawing, command wiring, tests, UI scenarios and docs.
Saved designs gain two constraint kinds, in one pending format file.
Fixes#4064.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch Dimension scenario: pick the circle at its top edge (#4064)
The bottom edge sits under the Dimension tool's status hint in the scenario window, so the second click never reached the tool.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Test: a text on a path follows the path when a parameter moves it
A construction line placed by a dimension that reads a parameter, and a text laid along it: after
the parameter changes the line has moved and the text has not. It follows one evaluation late.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Sketch text: a text on a path follows the path in the same evaluation
Problem: texts are laid out with the sketch's links, before the sketch is solved. A solve that
moves the curve a text runs along (a path placed by a parameter) left the text where the path had
been before the change, so it followed one evaluation late.
Solution: after a solve that keeps the sketch's orientation, every text that runs along a curve
of its sketch is laid out again along that curve as the solve left it; a text that no longer lays
out adds its warning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: an offset plane on a sheet flange's face follows the flange
An offset plane on the inner face of an edge flange, picked by body and index as model.faces
lists it. When the base gets wider the flange moves along x and the plane stays where the face
was picked; a sketch on the same face follows it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Construction: a plane on a sheet's flat face follows the face
Problem: a construction plane on a flat face of a sheet body resolved the stored plane, which is
only where the face was when it was picked. When the sheet changed the plane stayed behind, while
a sketch on the same face follows it by its sheet face name.
Solution: a construction plane on a sheet's flat face resolves that face's plane as it is now, as a
sketch on the face does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: a design keeps several hundred configuration rules
An assembly that switches a few hundred parts on and off, by two rules each, needs hundreds of
rules; the saved-rule budget refused more than 128.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Configurations: a design keeps up to 2048 rules
Problem: a configuration table kept at most 128 rules. A rule drives one feature's suppression,
so an assembly that switches a few hundred parts on and off (by two rules each) could not keep
its rules. Copying rules for an independent component copy looked up each new id by scanning all
rules, which a larger table makes slow.
Solution: MAX_RULES is 2048; a copy looks its new ids up in a set of the ids taken. The docs say
the new limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The parts of one STEP assembly import share their face names, and each
part's body stays where the file has it, placed in its component by an
offset. A joint origin on a named face (a hole's centre, a face's
centre, an x reference by face, the end a round origin takes) looked the
name up on every body of the design and compared the pick, in the
joint's component coordinates, with each body as it lies. Another part's
face of that name could lie nearer, and the joint resolved on that
part's face: a pin jointed into one plate's hole landed where the other
plate's hole is relative to its plate.
named_face now looks only at the bodies of the joint's component, each
in its own coordinates, a face the name finds exactly before a piece of
it or a face it was merged into, then the nearest. The design-wide
lookup stays for a face whose body has gone to another component.
named_round, x_axis, pin_end and end_faces take the component, as
face_name_at and round_end_at already do.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A joint origin at a face's centre (`joint.origin {face}`, `Snap::FaceCenter`) was the face's
area centroid, holes included. A hole cut into that face, moved or suppressed therefore moved
every part held at the face's centre, though the face's outline stayed where it was: on a
200 x 100 plate with a 20 mm hole, 0.31 mm for each 20 mm the hole moves and 0.62 mm when the
hole, 40 mm off the middle, is suppressed.
On a planar face with holes the origin is now the middle of the area the face's outer boundary
encloses (`outline_centre`: the face's triangle sides that no other triangle of the face runs
back along, corners matched by place, chained into loops in the face's plane; the centroid of
the loop enclosing the most area). A named face (`NamedFace::plane`) and the planar face
nearest a point (`nearest_plane`) both use it. A face without holes, or one whose mesh gives no
clean outline, keeps its centroid as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
An edge joint origin looked its edge and face up in the body's own coordinates with the pick in the component's,
and returned the frame in body coordinates. On a body placed by an offset (an imported part's bodies are) a pick on
the edge where it is shown found no edge ("joint origin: no edge there"), or the origin sat away from its edge by
the offset. Edge origins now take the picks into the body's coordinates through the inverse of its offset and place
the frame back by it, as named faces and round origins already do. A body without an offset is unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: a plane through a construction axis follows it in a design with a component
Two offset planes, the axis where they meet and a plane through that axis. Once the design has a
component, a parameter change fails the last plane with "unknown construction `Ax`".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Construction: the root's constructions are found once the design has a component
Problem: once a design has a component, the root's construction features are built in the model
placed in the world. That state carried each component's bodies, sketches and threads, but not
its construction planes, axes and points, so a construction built on another one failed on every
evaluation with "unknown construction".
Solution: the world state carries each component's constructions where the component is placed
(moved by its occurrence's placement, as the bodies are).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sheet metal: test that an unfolded sheet's flat face is named after its base at every size
An unfold keeps the base in place and lays the flanges out beside it; the flat
face spanning them and the bend strips is the base's face. It was named after
the unfold whenever few of its sample points fell on the base (the bend strips
are many small triangles, the base two big ones), and that changed with the
sizes: a size change renamed every top and bottom face the refold made of it,
and joints and sketches on them lost their faces (40 of 85 joint ends of a
real part after one change). The test unfolds and refolds a base with three
flanges at two flange heights and wants the flat face and every refolded
panel face named after the base.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Sheet metal: the panel an unfold or refold keeps in place names the face it is part of
A face a sheet feature made is named by where its sample points lie on the
input's faces: in place, else taken back through the folds. Only nine points
per face are sampled, triangle centroids picked by index. An unfolded sheet's
flat face spans the base, the flanges laid out beside it and the bend strips
between them; its bend strips are many small triangles, so most samples fell
on them. Those lie on no panel, and one of them made the fold fallback give
up for the whole face. The face was named after the unfold, and the refold
passed that name to every top and bottom face; which way it went changed with
the part's sizes.
For a sheet feature that moved panels, a face the plain vote leaves unnamed
is now looked at closer (up to 256 points): if a part of it lies in place on
the body's own face before (the panel the feature kept), that face names it.
Else the fold fallback votes over the points that can be taken back, when at
least half can, instead of none when one cannot. Other features, and faces
the plain vote names, are named as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: a pattern copy's piece names match as the original's do
A copy's faces carry the instance after the name, after any piece qualifier
(`top#[left,slot:a]@F9.1`). A stored piece name of a copy whose bounding faces have changed since
finds no face of the copy at all (None at the first assertion), where the original's identical
name matches by its stem. On a real part: the joint ends on a patterned copy fall back to their
picks after a size change, the original's resolve by name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Names: a pattern copy's piece names match as the original's do
Problem: a pattern's copy names its faces after the original's with the instance appended
after any piece qualifier (`top#[left,slot:a]@F9.1`). The piece parser expects a qualified name
to end with its qualifier, so a copy's name was its own stem: when the faces around a piece
changed, a stored name of a copy matched no face of the copy at all, where the original's
identical name still matched by its stem. Joint ends on a patterned part fell back to their picks
after a size change and flipped to the other end of their holes.
Solution: `history_names::matches` takes the pattern instances off the end of both names first
and compares the rest as before, within the same copy only (equal instances; an original's name
never matches a copy's face, nor one copy's another's).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: a switch parameter alone switches the features its rules suppress
Configuration rules that switch features' suppression from a parameter (drive_suppression when
`on` = 0) ran only on config.activate: a plain parameters.change of the switch left the features
as they were, so a script had to activate a row for every change. Red until the fix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Configurations: a parameter edit runs the suppression rules whose condition reads what changed
Problem: configuration rules ran only when a row was activated or a configuration edited. A
design that switches features on and off by a parameter (a rule that suppresses a feature when
the parameter is 0) did not follow a parameters.change of that parameter.
Solution: parameters.change (one parameter or several) runs, before the rebuild, the enabled
rules that switch a feature's suppression and whose condition reads a parameter whose value
changed (or a feature switched earlier in the same pass), in their order as activation applies
them, and lists them as `switched`. Driven parameters and restrictions still wait for a
configuration edit or activation; a rule whose condition reads nothing that changed leaves a
hand-set suppression alone; a rule that cannot be evaluated is skipped and never blocks the edit.
One undo step with the edit. docs/configurations.md says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>