- `"shells": N` in expected.json grades the total number of shells: a body with a sealed void
holds two, and some joins keep several lumps in one body. Those cases (#3175, #3455, #3526,
#3730) are graded on validity again instead of being marked not valid.
- When SMLib's record conversion says "not supported yet" (revolved surfaces, traced intersection
curves), its check gives no verdict. That's shown but not graded, since it isn't a fault of the
body. solidcraft_kernel::SmlibCheck carries the three outcomes.
- `$OUT` in a recipe is a scratch directory outside the repository, for files a case writes. The
two STEP-export crash cases write there instead of /tmp.
- cargo xtask kernel-cases --results FILE keeps every result as JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every other sweep, loft, revolve, pipe, coil and rib issue and PR, one line each: auto-filed reports that carry only command parameters, reports cut off in the source, UI and dialog items, feature requests, and failures that belong to import, shell, fillets, booleans or tessellation.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Coils split and trimmed by a plane, cut with a negative pitch, joined flush round a cylinder, intersected with a cylinder, cut as a thread groove into a bore, and placed with a square wire outside the diameter (screw-motion Pappus); surface revolve, sweep and loft sheets with areas worked out by integration, and a rail-guided surface loft in either section order.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
End faces of a loft, a sweep and a coil extruded, closed twisted sweeps round a torus, a twisted square cut through a tube, a ring swept along a short arc and joined to a collar, two overlapping swept arc walls, a rib grown along the sketch normal, and three pipes meeting at a point.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
End scale, parallel orientation and guide rails on straight paths (frustums and a sheared cylinder), a rectangle swept round a mitred corner, a profile mid-line on a closed rounded rectangle, second sweeps from a plane along a closed circle, hollow and cutting pipes, and a flat wall of a swept corner extruded.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Refusals for a profile across the axis and an axis outside the sketch plane, a construction axis picked by name, a cone left by a revolve cut, revolve joins and cuts whose end faces lie in a face of the target, a dome cut by a ball on its seam, a horn-torus turn, and half-disc revolves with a refused hostile sweep scale.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Spherical shell sketched off the origin, adjacent profiles on the axis, whole planar faces of full and partial turns and a face pick on a fresh revolve, a half slot turned about its centreline (alone and as a cut), a torus cut by an overlapping ring, and a 300 degree revolve crossed by a plate.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Added: 451 (block inside / crossing a hollow spherical-shell tool), 1107 (hollow hub joined
with nine blades), 1140 (spiral hollow lofted tube cut in half and joined), 2928 (cap-touching
lips with 0.0001 mm offset walls), 3850 with 3741 (cross cut touching a round side, and the
hole after it), 1984 (near-coaxial pin and rivet overlaps). #3573 is now a source of
shell/3576. Their lines are gone from the skipped files; #2259, #3518 and #3602 stay skipped
with corrected reasons.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hollow elbows lofted along a bend (Pappus), hollow bands halved and joined, a flange touching the end of a bent tapered loft, tapered and twisted lofted blades patterned round a disk, and a loft joined into a window that it overhangs, alone and mirrored on a hollow case.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A shallow loft cut from a slab top face, a loft cut whose sections touch the block sides given in either order, circles lofted into a cone on a turned-over plane, a loft guided by a rail, a circle lofted to a comb outline, a square lofted to a circle, and a circle-to-rectangle loft joined to a cylinder.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Ruled lofts of zig-zag outlines worked out with the prismatoid formula, rotated rectangle sections turning through half a turn (Pappus), ring sections with round and rectangular holes, a cone loft meeting a cylinder wall near its top, a loft standing on a box face, a loft cut limited by targets, and a refusal for sections in one plane.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The rest of the thread cases (holes at the nominal size, shafts and holes
off the thread's size, the crash and sketch-attachment repros) and the
triage of the sources that are not kernel geometry.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
External and internal modelled threads, tapped holes and threads beside
other features, each graded against the ISO 68-1 groove volume (Pappus)
and the part's own closed-form volume.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Every other fillet, chamfer and blend issue and PR, one line each: auto-filed reports from private designs (picks and error only), sketch fillets and chamfers, UI, previews and navigation, feature and fit-option requests, reference cases that already exist in tests/oracle, surface modelling, and failures that belong to booleans, shell, import, tessellation, sheet-metal or threads.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The graded volume was right; the derivation text quoted the union as 46476.5 instead of 45571.7.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Copies of filleted and chamfered features (a pasted block, a pattern of pockets with corner rounds, a pattern of chamfered bosses), a grille of rib roots, a join that needs a boolean retry followed by a fillet, and curvature-continuous fillets worked out from the documented quintic section.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Rounds along curved outlines, with the removed volume worked out by Pappus or by integration: merged cylinders, a D prism, a rounded rectangle with 0.02 mm end edges, a long box beside quarter turns, vertical corners after bottom rounds, a bent tube end, a boss's bottom arc, bars running into a boss, an edge ending on a curved wall, and the knife-edge arc corner.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Rounds with their own right answers: a radius larger than the ring it runs along (refused), a pick on a smooth seam (refused), a far edge pick (refused), a round that uses up an end face or a wall, a round over a hole, rounds on both sides of a thin wall and concentric with an inner one, a round on a sphere's flat cut, an edge ending on a tangent seam, and rims on B-spline ramps.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Chamfers on boxes, plates, discs and sectors with closed-form volumes: all twelve edges in the order that was refused, a concave chamfer that adds material, a chamfer next to square openings and one that runs into them, a hole rim tangent to the bottom face, a hex hole's corner bevels, a one-pick chain on a large part, a bottom loop as wide as the corner round, two distances on a circular rim, the end outlines of a rounded prism, a chamfer over a joined pin, and the equal chamfer of a slanted plug. Spline-sided pillar (invariants only) for chamfer and fillet.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Cases: mirror of a cut under a wall (#4011), coplanar intersect (#3671), multi-lump
intersect (#3526), split along a face plane (#3447), 64-peg join (#3455), boss on a rod
(#3485), collinear cylinders and pin in a bore (#3497), swept G2 cut (#3604), spokes
tangent to a hub (#3612), sphere and pyramid (#3633), column in a channel (#3665),
extrude to a point on an edge (#3729), emboss on a cylinder (#3782), circle-only join
(#3841), ring on a perforated plate (#3887), symmetric revolve cut (#4008), walls round a
floor (#4058), slab beside a bore (#4095), and others. The rest are skipped with a reason
in skipped-c.json.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every other sheet-metal-keyword issue and PR, one line each: UI, docs, file
format, naming and attachments, DXF output, feature requests, user designs
with no repro, and failures that belong to booleans, fillets, shell, sweeps
or threads.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Trays at 72 degrees and with four angles and heights, a tray shrunk by a
parameter and unfolded, an L bracket unfolded and refolded, opposite flanges
at 105 and 120 degrees, torn corners folded, and a rhombus whose square
reliefs would overlap.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Unfolded trays graded by the flat size W + 2(H - BD): torn, round and square
relieved corners, per-feature reliefs, rounded plate corners; a shelled tray
and a bracket converted at their bends; an L converted to the rule's radius.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A flange beside the leg of an L, along what a cut-out leaves of an edge,
beside a ledge as tall as its setback, a return on a flange's far edge, a
round hole, a slanted slot and an ellipse across a bend, a hundred slots with
four folds, and the refusal of rule values sheet.flange would ignore.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Cut-outs folded and refolded, a hole square to a 45 degree flange, a slot
that parts a flange from its base, an inside flange on a plate turned
62 degrees, cuts after cuts, a hole beside two adjacent flanges and a flange
on a flange's side edge; refusals for a flange on a bend line and a flat
pattern after a fillet; a mirrored sheet body that must stay sheet metal.
Volumes by hand (K = 0.5 folds: flat area * t; otherwise bend volumes).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Plates converted to sheet metal (holes, long thin strips, engraving, a
channel with modelled bends, position kept) and holes and cut-outs
through or into a sheet; volumes by hand from the plate and the holes.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Folds of tabs and plates, graded by closed form: a fold keeps the blank's
flat length, so V = flat area * t + theta * w * t^2 * (1/2 - K). Tabs
on one line (#264, #638), a tab on an L's inside edge (#639), a fold just
inside a tab root and a refusal at the root (#262), a fixed point on the
top face of a large plate (#685).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Cases for the near-contact gap join, a countersunk hole beside a distant
body, a perforated plate under a ring, a sealed void, a rim and tooth join,
a frustum cut, a line-to-line pin, a flush notch, spoke patterns and a join
into a rotated occurrence. The rest of the bundle is in skipped-b.json with
one line each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hand-derived cases for tapered and collinear extrudes, pattern and mirror
copies keeping their targets, a cut up to a face, a prism joined to a
round-cornered slab, a clip round a small hole, and near-contact joins.
2564, 2583, 2601, 2754, 2755 (pattern, mirror), 2801, 2810, 2826, 2580,
2896 (overlap)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Spheres cut twice (#1717), box/cylinder intersect (#1647), crossing cylinders
moved far (#1649), coaxial cut from a thin disc (#500), coincident cylinder
walls (#114, #2008, #1910, #1865), rim touching a coin (#168), holes along
walls and beside rounds (#559, #562, #1279, #1355, #2055), tangent holes
(#307), blind cut in a cylinder (#308), through-all cut (#423), shallow cuts
(#1858), skin left by a short cut (#1730), delete face (#1927), collinear
extrude sides (#1949), hidden bodies (#2464), mirror and patterns (#2003,
#2524, #2076), tapered extrudes (#831), text cut (#1195), split (#13).
Every other item in the bundle is in skipped-a.json with its reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every other tessellation-keyword issue and PR, with one line each:
rendering and GPU drawing, UI, performance, display-plan plumbing, and
failures that belong to booleans, fillets, threads, import, shell,
sheet metal or crashes.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
311 ramp cut across a round blank, 784/811 filleted and drilled bodies
for STL export, 818 blind hole in a filleted ring, 819/921 pocket that
splits a wall seam, 1263 concave arc with a knife-edge tip, 1615/1653
crossed lofted tubes, 1648/1850 sphere touching a box edge, 1666/1670
two twisted lofts, 1753 bowl rim cut by a cylinder, 1813/2712 lens face
thinner than the tolerance, 2069 notched ring moved far away, 2528
slot joined with an overlapping cylinder.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
140 join with a pad hanging past the edge, 1219 bore fillet then grooves,
1985/2243 STEP export of two enclosures, 3540 cut with a coincident cylinder
face, 3685/1559 delete a fillet face, 4092 loft + ribs + pad union (two
recipes), 2992 disk and 36 twisted loft blades. Everything else is skipped
with a reason (private designs, other areas, UI, perf only).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
4009 closed shell, 4010 shell open at a hole wall, 2531 point pick after an edit,
3468/3898 offset next to a fillet, 12 split face piece, 566 swept bar, 745/3893
freeform boss (two variants), 3103 tapered cylinder, 3669/2990 loft, 3283/3650
and 2939 curved offsets, 3506 and 1972 split then shell, 3576, 391, 1494, 1525.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cases: #3702 (a board in the cavity of a case with a filleted rim, cut leaves the case
unchanged) and #258 (STEP cone to a point, with and without an apex vertex, and the 0.5 mm
pin). Everything else in the bundle is skipped with a reason in skipped-other.json.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- solidcraft-cli and solidcraft-engine forward an `smlib` feature to solidcraft-kernel/smlib, so
`cargo build -p solidcraft-cli --features smlib` gives the rig SMLib's check.
- solidcraft_kernel::boolean_kernel() says which kernel this process runs booleans on.
`default` until the SMLib switch (SOLIDCRAFT_BOOLEANS=smlib) lands and answers there. An smlib
run on a build without the switch reports "not supported yet" instead of grading the default
kernel under SMLib's name.
- An area may keep its skipped list in parts (skipped-<part>.json).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every geometry case the old kernel got wrong becomes tests/kernel-cases/<area>/<id>/: an
engine script or oracle recipe, and expected.json with the right answer, from analysis or a
hand calculation, or else the invariants. Never a kernel's output.
- solidcraft-cli kernel-cases <dir>...: runs a case and grades it. The checks are the outcome
(succeeds, or refuses cleanly), the body count, and one closed shell per body that passes the
record's structure and geometry checks and, with SMLib built, SMLib's check(All). Counts,
volume, area, centroid and box are graded where the case gives them. Each run is pass, fail,
not supported yet or crash.
- cargo xtask kernel-cases [--kernel default|smlib|both]: one process per case, so a native crash
or a hang (--timeout) is that case's result. It writes docs/kernel-cases.md: coverage per area
and source, results per kernel, and the sources looked at and skipped (<area>/skipped.json).
- solidcraft_kernel::validity and smlib_built, which the rig's checks use.
tests/kernel-cases/README.md gives the format.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A test over every design the repository keeps (the action matrix's
corpus: old design files, examples, regressions, demo and typical
designs, the oracle recipes; plus the sample designs, the engine's
design fixtures and the older designs of the hole matrix, taper and
projection tests: 154 designs). Each is rebuilt and recorded in
tests/naming/<group>/<design>.txt: per body the names of its faces and
edges with whether each follows exact history, and every stored name
(feature face picks, fillet/chamfer/bend edges, sheet metal edges, the
face a sketch is attached to) with the face or edge it finds now. A
difference fails with the design and the changed lines; record an
intended change with NAMING_CORPUS_BLESS=1, as FEATURE_WALK_BLESS does.
Face and edge indices are left out on purpose. They are the kernel's
order: truck already gives a fillet's or a boolean's faces in another
order from one process to the next (oracle 07 and 37 changed on every
run), and SMLib will order them differently again, while what must not
change is the names and what references find. Names are listed sorted.
One design's names themselves change between runs on truck
(closed_sweep_torus_cut: level wall halves numbered #1/#2 in kernel
face order); it is listed in UNSTABLE with the reason and its
difference printed instead of failed on.
Records made on this branch (truck), macOS. The whole corpus builds in
about 20 s on 14 cores (designs run side by side).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
cone_point and cone_point_vertex join the sweep now that #3871 reads a cone
bounded only by its base circle up to its point.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: regression sweep over the step-conformance parts of known shape
Fifteen generated parts from step-conformance (CC0): plain, NURBS, seamed,
placed, inch and far-away cylinders, domes, a grooved shaft, a plate with 100
holes, a 3.6 m disc, a 0.5 mm pin, a B-spline half-torus and a washer. Each
reads back with its exact volume, its box and its face count. The half-torus
on a TOROIDAL_SURFACE and the cones to a point are left out until they read
right.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP conformance sweep: the pin's volume as FRAC_PI_8 (clippy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Tessellation: trimmed faces of display meshes stay on their surfaces
Display meshes triangulate a trimmed face in parameters scaled by the
surface's speed along each, so a strip stretched along one parameter is
not fanned across, and every boundary segment stays a constraint: one that
crosses another is split where they meet. Boolean meshes keep truck's way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Tessellation: one boundary rule for every mesh; drop the #1648 retry
A boundary segment that crosses one already added is split where they
meet in Boolean meshes too, which keeps a pinched face (#1648) whole
without the snap-and-retry. Faces whose segments all go in mesh as
before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Robustness goldens: seeds 1, 23, 55, 64 and 86 re-recorded on current main for #1653
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
* Thread preview test: wait for the stale fit error to clear before the next preview
After switching back from M6x1.3 to M8x1.3, wait_feature_preview stopped at the M6 error still on
screen when the new preview started a few frames later (seen on Linux CI with #1653's meshing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
* Robustness goldens: the slow seeds 14, 20 and 40 re-recorded for #1653 from the merge queue
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
truck placed a face that no intersection divides (every face of a shell
that meets nothing of the other) by counting the faces a ray crosses,
taking each face's surface as stored. A revolved body's reversed faces
counted the wrong way, and an inward shell (a void, a cut's inverted
tool) was read as a solid: a cut beside a sealed void came out empty,
refused or, with a tool whose bounding box covers the target, taken with
the body gone. Intersections of such bodies came out empty as well.
In an AND the crossings now count as each face is oriented, and an
inward shell holds what lies outside it. An OR keeps truck's count.
The corrected cut let a folded offset through: an arc edge next to a
face it meets tangentially had its ends moved past its middle, and the
arc went the long way round (robustness seed 73's shell). The offset
refuses an arc whose middle crossed its chord, as it does a straight
edge that turned round.
Goldens: seeds 0, 45 and 77 had a cut refused as empty that now takes
what it should; their volumes are checked by hand in the PR.
A face pinched to a point, where its boundary touches itself or another of its loops within
TOLERANCE (a sphere touching a box's edge leaves one on the box), had a constraint refused by the
CDT, and the fallback cut across the face: it came out with no triangles or without those at the
pinch. When a constraint is refused, the vendored truck-meshalgo now puts every boundary point
within TOLERANCE of a segment into it (at most 8192) and triangulates the face again. Faces whose
segments all go in mesh as before.
The regression tests live in crates/kernel/src/thin_face_tests.rs, and the #1648 property test in
boolean_props.rs is no longer ignored. Robustness seeds 20 and 55 are recorded with their Linux
values.
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* Fix large modeled threads and thin crest reconstruction
Helix stations follow the pitch (radial chord error under 1% of it, 48 to
720 stations), and the faceted rebuild retries at the BSP's precision when
the usual weld tolerance collapses a thin crest facet.
Rebased onto main as one commit (the branch's own commits touched UI files
that later moved to #2263 and #2264). Adapted to main's UnitVec3 thread
axis: `*k` in thread_groove and `*cylinder.axis` in the new flange test.
* Fix icon review revisions for same-timestamp edits
On Windows, Git's default core.autocrlf checks the icon masters and the
palette out with CRLF, and `cargo xtask icons` failed four ways:
- the accepted-icon hashes (lint_icons.py and the review page's
review_state.master_hash) were taken over the files' bytes, so every
accepted icon read as changed; both now use master_hash, which hashes
the text with CRLF read as LF;
- icon_palette.revision hashed the bytes while save_colours hashed the
text it read, so every palette save was refused as stale; revision now
reads the text too;
- the tools and their tests read and wrote text in the locale's encoding
(cp1252 can't write U+2194); they now say utf-8;
- the icon inventory listed UI files with backslashes; it writes /.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>