Commit Graph
1134 Commits
Author SHA1 Message Date
raykholo 3cdfec798f Timeline: joints in feature folders (#8306) (#8316)
* claim: #8306

* Timeline: joints in feature folders (#8306)

timeline.group and timeline.move_to_group take joints as well as features, so
hundreds of joints fold into one folder tile. A closed folder shows one tile
whatever it holds; opening it shows its features and joints in both the bottom
and left History. Suppress, delete and ungroup on a folder reach its joints too
(one undo step), deleting a joint removes it from its folder, and an unknown
joint id or name is an error. Saved with the design; designs without joint
folders read and write as before.
2026-10-29 15:59:18 +00:00
Colin Faulkingham 4e78acc7a2 Sketch: the same constraint twice is one constraint (#5224) (#8850)
* claim: #5224

* Sketch: the same constraint twice is one constraint (#5224)
2026-10-29 15:31:18 +00:00
Dahak BuildsandDahak Builds 35601da3f0 3D sketch: 3D Line, Spline and Point buttons start tools (#8040) (#8041)
* claim: #8040

* wip: 3D line/spline/point tools (#8040)

* Take sketch.move3d off the toolbar help backlog now that it is agent-only (#8040)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-29 15:10:41 +00:00
austin62jakeandClaude Opus 5.5 3e01081ff9 Control token: a closing window removes only its own token and discovery files (#8794) (#8837)
* claim: #8794

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* Control token: a closing window removes only its own token and discovery files (#8794)

Under Flatpak each instance has its own loopback, so a second window
binds the same port number as the first and writes the same
<port>.token, <port>.pid and current.port in the shared data folder.
At exit the first window deleted them all, unconditionally, leaving the
second window running with no token file a client could read.

remove_token_file now takes this launch's token and removes the token
and process files only while the file still holds it; the process id
can't tell instances apart, as every Flatpak instance has the same one.
remove_current_port also takes the token and keeps the discovery file
while another launch's token file holds that port, and removes
current.pid with current.port (it was left behind).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-29 15:01:45 +00:00
Colin Faulkingham 443e5cd59d Feature editor: allow visibility changes while editing (#8810) (#8827)
* claim: #8810

* fix(engine): preserve feature editors across visibility changes (#8810)
2026-10-29 14:26:24 +00:00
Charlie 5a0abb8710 feat(align): add Components mode to Align for occurrence placement (#7224)
Align gets an Object Type row (Bodies | Components). In Components mode it runs the new
occurrence.align command, which moves only the chosen occurrence placements (their
transforms) instead of adding an Align feature to the shared component, so other instances
stay where they are.

- occurrence.align: from/to points, snaps, planar faces and planes in world coordinates,
  flip, capture/pending, grounded and rigid-group refusals as occurrence.move.
- A viewport or browser-body pick takes the placement directly under the active component.
- A placement inside a subassembly placed more than once still moves (as occurrence.move
  does) but the dialog warns, and the reply lists it under shared.
2026-10-29 14:19:05 +00:00
cronos 28e26209f3 Assembly Move: drag allowed joint freedoms (#6679) (#6904)
* feat: add joint-aware assembly Move handles and live motion readouts

* test: improve render job failure diagnostics

* fix: preserve assembly Move compatibility and viewport theme colors

* ci: skip default label sync for fork PRs

* fix: keep Windows CI checks portable after main rebase

* test: cover RTL assembly strings and stable refraction job

* i18n: cover assembly Move in Vietnamese

* i18n: cover assembly Move in French

* fix: complete CGA palette for assembly motion handles

* fix: complete Assembly Move palettes and Turkish strings

* fix: retain assembly move cache answers and toolbar help

* style: format merged assembly Move navigation guard

* fix: align Assembly Move preferences and tests with main

* Fix offline update fixture synchronization and clipped prism intersections

Wait for all v5 manifest requests before deploying v6. Intersect hole-free prism sections over their common height, retaining the established B-rep path for newly clipped perforated sections. Preserve the failing property seed and add closed-form and cap-boundary regressions.
2026-10-29 13:57:31 +00:00
RyanandClaude Opus 5.5 5e0e168ae9 Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095) (#8103)
* claim: #8095

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095)

component.properties and occurrence.properties report each closed body's
inertia tensor about its centre of mass, and in total the tensor about the
total centre of mass (world axes, g·mm²), its principal moments and axes,
the first moments, and with `about: [x, y, z]` the tensor about any point.
The tensor comes from each body's welded export mesh, tessellated once per
body, scaled to the measured mass and turned by each placement; bodies add
by parallel axes. The maths is a new crates/geom inertia module.

The Properties window shows the first moments, the tensor, the principal
moments and axes, and the view marks the centre of mass with the principal
axes while it is open. Inspect → Measure → Properties now opens that window
(it ran the command and showed nothing).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: Copy matrix, and the whole design's card titled just Properties (#8095)

Copy matrix, under the tensor, puts it on the clipboard as three lines of
tab-separated values at full precision, in the units shown. The card for
the whole design is titled Properties; one opened on a component,
placement or bodies keeps its name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: measure beside the window, so a large assembly doesn't freeze it (#8095)

Properties ran on the window thread: 18 s on a 144-body design, with the
window answering nothing meanwhile (#5203). In the desktop app the card now
measures on a copy of the session on a worker, the way #4614 made agents'
measures work, says "Measuring…" until the reply is in, and Close drops it.
A quick measure still shows at once; headless, tests and the web measure in
place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 13:47:44 +00:00
semmelrindeandClaude Opus 5.5 6a183cce02 Sketch corners: a corner cut is refused where two lines lie in line, as rounding is (#8802)
Chamfer at a corner of two lines lying on each other cut both back and
added a line of no length between their ends; lines in line with each
other have no corner either. chamfer now refuses a corner angle of 0 or
180 degrees with Fillet's message, "the lines are parallel" (found by a
local trim fuzzer).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 11:49:31 +00:00
semmelrindeandClaude Opus 5.5 cf86f18c11 Sketch: an end held on a removed curve where another curve ends stays tied (#8779)
A trimmed circle ended on a line exactly where an arc started on that
line, held there by a point-on-curve tie. Trimming the line away dropped
the tie and left the two ends on one spot, untied. remove_curves now ties
each point held on a removed curve at one of its ends to that end before
the curve goes (found by a local trim fuzzer, 15 -> 12 cases in 2000
seeds).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 11:07:28 +00:00
Nathan Dane 3cc10acafa Render lights: uniform light list, solo and mute, and the Light editor (#6281) (#7265)
* Render lights: uniform light list, solo and mute, and the Light editor

* Render lights: Lighting and Light editors to the approved design

* Render lights: the scale-test frame carries the product light list

* Restore the stable Render light mute target on the shared eye control

* fix: validate the viewport BRDF probe with current shader dependencies

* fix: compile legacy lighting controls only for tests

* fix: scope the legacy lighting preset import to tests

* fix: reuse the merged Add Light label and translations

* test: enable the implemented Add Light radial action

* fix: restrict the legacy CPU vector editor to tests

* test: reveal Output before checking Lights browser focus

* test: use the published Browser card rectangle for Output scrolling

* test: reveal Output children before exercising editor navigation
2026-10-29 08:40:51 +00:00
semmelrindeandClaude Opus 5.5 2d56f5d599 Construction: a vertex where another body's edge runs past stays its corner (#8650) (#8722)
A vertex pick found its named edges and then picked each again by a point
on it, among the edges of every body. At a corner where another body's
edge runs past (a wall against a side wall), all three became that edge,
and the vertex its end 3 mm away. Take each named edge's ends from the
body that has it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 08:03:31 +00:00
raykholo aee57875f5 Sketch Fillet: 3D sketch lines are not offered and say they can't be filleted yet (#4160) (#4177)
* claim: #4160

* Sketch Fillet: 3D sketch lines are not offered, and say they can't be filleted (#4160)

The Fillet tool offered 3D sketch lines as picks, and sketch.fillet then
refused them with "`a` must be a line". The tool no longer offers them, and
the command refuses them with "not supported yet: filleting 3D sketch lines".

* Sketch Fillet and Chamfer: refuse all spatial sketch curves (#4160)

* Sketch corner test: give the picked curve its point (#4160)

main added a point to sketch-curve hits after this branch was written.
2026-10-29 07:22:53 +00:00
Nathan Dane d2fcab8432 Render shot editor: camera and frame controls, aspect presets, guides and frame overlay (#6281) (#7232)
* Render shot editor: camera and frame controls, aspect presets, guides and the frame overlay

* Render shot: Shot editor and Scene overview to the approved design

* Distinguish Render stage variants from native window frames

* fix: restore library inspection after clearing shot selection

* test: follow the merged Output Check navigation

* test: inspect Check without requiring a preflight result

* test: cancel Shot removal through its shared dialog action

* fix: remove obsolete Inspector stage form after editor integration

* fix: preserve Appearance Advanced when clearing Wear focus

* test: expect the dedicated Check editor from Scene overview
2026-10-29 07:03:24 +00:00
raykholo afe7dcd4e1 Allow sketch Mirror to use origin axes (#4193) (#4207)
* claim: #4193

* Sketch Mirror: an origin axis can be the mirror line (#4193)

Mirror accepted only a straight curve of the sketch. It now also takes an
origin axis that lies in the sketch plane ({axis: X|Y|Z}), projected into
the sketch as a fixed linked line, so the copies stay symmetric to it and
follow the source when it moves.

* Sketch Mirror: use current sketch store (#4193)
2026-10-29 05:08:00 +00:00
Nathan Dane bd8cb4e6d6 Render output: Effects and Check sections, Size presets panel and the Check chip (#6281) (#7233)
* Render output: Effects and Check sections, Size presets panel and the Check tool chip

* Render output: Sampling, Effects and Check editors as child rows under Output

* fix: restrict legacy Output controls to test builds

* fix: cover status controls and reveal Effects test targets

* fix: include shared quality reviews in copied check reports

* fix: remove the obsolete Effects GPU guard after Wear integration
2026-10-29 04:39:34 +00:00
Nathan Dane c1925bb219 Render appearance: click, drag and paint to assign, Pick Up, copy and paste (#6281) (#6431)
* Render appearance: click, drag and paint to assign, Pick Up, copy and paste, and Remove

* Exclude the workspace Shots strip from dialog width checks

* Exclude the collapsed Shots control from dialog width checks

* Retain assembly cache listings and measure actual dialog bounds

* fix: handle toast button rectangles in assignment status

* fix: restrict gallery note measurement helper to tests

* test: measure assignment help at the catalogue footer

* fix: share the command revision snapshot after restacking
2026-10-29 04:33:31 +00:00
semmelrindeandClaude Opus 5.5 f4e52c4d3e Sketch: points tied only through a removed curve's end stay tied (#8640)
* Sketch: points tied only through a removed curve's end stay tied

Removing a curve removed its orphaned end points with their constraints, so
two points made coincident with such an end lost their tie although they
still met: two rectangles' corners on one arc end came apart when the arc
was trimmed. They are now tied to each other before the point goes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: keep the tie test with the other trim tests

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:14:22 +00:00
Colin Faulkingham 99664a4d35 fix: keep expression move distances on world axes (#7234) (#8508) 2026-10-29 03:39:39 +00:00
austin62jakeandClaude Opus 5.5 d8d22cd52a 3MF export: a component's bodies as one object with parts (#8139) (#8187)
* claim: #8139

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* 3MF export: a component's bodies as one object with parts (#8139)

file.export and file.save_mesh wrote every body as its own 3MF object and
build item, so a slicer loaded a multi-body part as separate objects and
could arrange them apart on the bed. With objects: "component", each placed
component that holds two or more bodies is written as one object whose
<components> are its bodies' meshes, built once, so PrusaSlicer, OrcaSlicer,
Bambu Studio and Cura load it as one object with a part per body, each of
which can take its own filament. The design's own bodies, and a component
with a single body, stay objects of their own. The default (objects: "body")
writes the same file as before.

- io: model_xml_parts and write_3mf_parts write the parts; export_with_parts
  maps body names to them. model_xml_with and export_with_quality give the
  same output as before.
- engine: mesh_parts reads `objects` (component is refused for formats
  other than 3MF); component_parts groups the placed bodies by placement,
  each part named after its occurrence (Bracket:1, Bracket:2).
- file.save_mesh passes the parts on when it also sends the file to a slicer;
  file.send_to_slicer's own folder export is unchanged.

Fixes #8139.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-29 03:35:38 +00:00
Nathan Dane 40ff251e5f Render wear: a Wear row and editor for the aging layers (#6281) (#7459)
* Render wear: a Wear row and editor for the aging layers

* test: read Wear header text from accessibility label values

* test: restore body picks for Wear header recovery assertions
2026-10-29 03:29:10 +00:00
Nathan Dane 09bf603588 Render environment editor: rotation, intensity, backdrop colour and ground (#6281) (#7231)
* Render environment editor: rotation, intensity, backdrop colour and ground through render.environment.set

* Render environment editor: rotation ring in the view with one undo step per drag

* Render environment: Source, orientation, backdrop, ground and atmosphere sections

* Keep segmented controls inside their allocated rows

* fix: compile legacy environment controls only for tests
2026-10-29 02:49:16 +00:00
semmelrindeandClaude Opus 5.5 f071f00155 Sketch Trim: an end at a place several curves cut is tied to the one with an end there (#8612) (#8628)
Where several curves cut at one place, trim pinned the new end onto the
first of them. At the touch point of two circles that was a rectangle side
passing through, and once a later trim removed the side the arc ends were
loose: a trimmed dog bone kept two untied ends.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 02:45:35 +00:00
semmelrindeandClaude Opus 5.5 e4cfbbd0c3 Sketch Coincident: refuse a line's two ends, as MidPoint refuses its own end (#8611)
* Sketch Coincident: refuse a line's two ends

Making a line's two ends coincident shrinks it to a point; a Parallel or
Perpendicular on it afterwards has no direction to hold and a later solve
could throw points far away while reporting solved, as with a line's own end
as its midpoint (#8562).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Coincident: keep the own-ends test with the other Coincident tests

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 02:21:05 +00:00
The Nomadandcfaulkingham 674ef84b53 Add History playback to the Inspect ribbon (#3693) (#7853)
* claim: #3693

* Fix timeline playback to show each rebuilt feature

* Move History playback into the Inspect ribbon

* Refuse Play History up front when playback couldn't run

Starting Play and the per-frame check that stops it were looking at
different app state, so Play could be accepted during an apply, a delete
check or queued history work and then stop silently on the next frame.
Both now use one playback_blocked check.

The UI also reads the engine's PlaybackAction as the typed enum instead of
matching strings, so a bad reply is an error rather than a quiet toggle.

* Put Play History in the History controls

History now shows five controls in transport order: start, previous,
play, next, end. Play runs timeline.play, so it turns into Stop while
playback runs, same as the ribbon button and the shortcut.

It's on by default (#3688, #3740, #4216). Anyone who wants the old four
controls back can right-click them and pick Hide Play Button, or clear
history_play_button under Preferences > Interface. In a named vertical
History too narrow for five buttons beside its grip, Play is left to the
ribbon rather than overlapping the grip.

* Draw the History Play button as a plain play/pause glyph

The Play button in the History controls now uses the same drawn glyphs as
its neighbours: a filled triangle, and two bars while History plays. The
triangle is bigger than the step arrows so it doesn't read as Forward.
The ribbon command keeps its timeline_play and timeline_stop icons.

* Keep the playback changes clear of PRs queued ahead

Several PRs in the merge queue touch the same lines, so this moves ours
aside without changing behaviour:

- history_play_button and its reset-test row sit with the other History
  preferences, not beside view_confirm_corner (#7248 adds status_bar there).
- History keeps main's history_transport_width() for four controls (#6430
  and #7459 call it); the Play button's count uses history_controls_width.
- A new or opened document stops playback after dim_view::cancel(), clear
  of the line #7819 adds after reset_chat.
- The Play/Stop label swap moves from interactive_command_info, which #7906
  rewrites, into the ribbon's command_info.

* Stop playback after the command completes, clear of #6433

#6433 rewrites the session.execute line in execute_command, and our playback check sat right under it, so the queue couldn't merge the two. Checking the revision after command_completed does the same job a couple of lines later.

---------

Co-authored-by: cfaulkingham <colin.faulkingham@gmail.com>
2026-10-29 02:14:53 +00:00
ba52632985 Tabs: Ctrl+Tab shows the next design tab, Ctrl+Shift+Tab the previous one (#8565) (#8597)
Two new commands, view.next_tab and view.previous_tab, with Ctrl+Tab and
Ctrl+Shift+Tab as their default keys: they appear on the Keyboard Shortcuts
page and can be rebound or cleared like any other. The window steps along the
tab strip and goes round at either end; one design alone stays as it is, and
a "save changes?" prompt keeps its tab shown. The engine only echoes the
step (no design edit, no undo step); engine.batch refuses them like the
other steps that go to another design.

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 01:25:12 +00:00
raykholo 0e01dc9bad Pattern counts: say when a parameter has a length unit, and refuse fractional counts (#5066) (#5337)
* claim: #5066

* Pattern counts: name a length-unit parameter, refuse fractional counts (#5066)

A count parameter created with a length or angle unit now gets an error
that names it and says to set its Unit to none. A count that evaluates to
a fraction is refused instead of being rounded silently.
2026-10-29 01:00:10 +00:00
semmelrindeandClaude Opus 5.5 1937dea04b Sketch constraints: refuse one curve picked twice for a two-curve constraint (#8577)
Parallel, collinear, equal or concentric of a curve with itself was added
as a constraint that always holds; perpendicular or tangent to itself was
refused as geometry that can't move. These six now refuse one curve
picked twice, as Coincident already does for a point, and leave the
sketch as it was. Constraints already in a design are untouched.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 23:52:44 +00:00
semmelrindeandClaude Opus 5.5 17807ab6dc Sketch MidPoint: refuse a line's own end as its midpoint (#8562)
A line's own end held at its middle shrinks the line to a point. The
solve accepted that, and a later angle, tangent or parallel on the line
had no direction to hold: its points went millions of millimetres away
while the sketch still reported solved. MidPoint now refuses the pick,
saying why, and leaves the sketch as it was. Constraints already in a
design are untouched (only the command refuses).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 23:11:05 +00:00
momysnowandClaude 1445b5a4f0 Extend: pick two curves to extend both to where they meet (#4750) (#8392)
* claim: #4750

Co-Authored-By: Claude <noreply@anthropic.com>

* Extend: pick two curves to extend both to where they meet (#4750)

`sketch.extend` gains a second form: `curves: [a, b]` names two lines or
arcs, with an optional `at: [[x,y],[x,y]]` naming the end of each to grow
(default: the end nearest the meeting point). Both grow along their own
line or circle to where they cross and the two ends are joined with one
Coincident, in one undo step. `moved` is the joined end's id.

- Where two crossings are possible (line and arc, two arcs) the one with
  the least total growth is used; a tie is refused.
- A curve that already reaches the point does not grow. An end held by
  other geometry or a constraint stays and gets a new line or arc.
- Parallel or collinear lines, curves that never meet, a point behind the
  chosen end, the same curve twice, splines, ellipses, infinite lines,
  offset geometry and malformed `curves`/`at` are refused with no change.
- The single-curve form is unchanged; its code is shared through
  `grow_line` / `grow_arc`.

Canvas: in the Extend tool, Shift-click two curves. Shift goes through
the tool modifier registry as the new `extend_pair` action, and Extend
turns off Shift's midpoint snap. Escape drops a pending first pick. The
sketching guide describes the gesture.

Co-Authored-By: Claude <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-28 23:10:24 +00:00
Colin Faulkingham 5221103369 Components: a component named like the design is reachable by name (#8358) (#8423)
* claim: #8358

* Components: a component named like the design is reachable by name (#8358)

Document::find_component resolved the design's own name to the root component (id 0) before
searching the component list, so a component that shares the design's name was unreachable by
name: appearance.assign reported `no component `CurtainRailPlug`` (the same lookup serves every
command that takes a component by name).

An exact component name (or component id) match now wins over the design-name fallback; "0" and
"root" still always mean the design.

Regression test: a_component_named_like_the_design_takes_its_appearance_by_name (fails on main
with the reported error, passes with the fix).
2026-10-28 22:07:58 +00:00
NOWN-DEVandClaude Opus 5.5 eb29c4b2d8 Sheet metal feature commands: typed parameter contracts (#6581) (#6582)
* claim: sheet.* typed parameter schemas

* Sheet metal feature commands: typed parameter contracts

sheet.flange, sheet.perforate, sheet.hem, sheet.fold, sheet.unfold, sheet.refold and
sheet.convert read their parameters by hand, so a misspelt key or a value of the wrong
shape was ignored or failed late, and describe_command had only prose for them.

Each now has a contract in schema/sheet.rs, checked in front of the unchanged handler,
and returns FeatureResult. The values no shared type fits (sheet-edge points, an edge
flange's edges, a fold's line and fixed point, the flange type, the positions, the
relief shape and the perforation pattern) get types that call the handlers' own
readers, split out of cmd/sheet.rs, and give their messages. The rule's values
(thickness, K-factor, bend radius, reliefs) stay out of the contracts: the handlers
refuse them, and strict refuses them as unknown keys.

A test passed a nested `base` object whose `sketch` the flange never reads; it now
names the sketch at the top level.

Part of #2829 (#6581).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sheet metal contracts: a further bend's angle stays as lenient as before

The flange handler reads a `then` bend's `angle` that is no expression
(`true`, a list) as left out and bends it 90 degrees. The rebased
contract had moved that check into the shared reader, so the handler
refused such a call even with the check off.

The reader is back to the handler's behaviour, and `ThenSteps` is the
stricter one, as the schema guide asks: warn reports such an angle and
strict refuses it. Tests cover the reader's leniency, the type's
refusal and the three check levels on one flange.

Part of #2829 (#6581).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 22:01:35 +00:00
tr1pp4andClaude Opus 5.5 7adbe00377 History in the browser: a History layout that lists each component's history in the browser (#7709) (#7710)
* Browser: the history in the browser, as a History layout (compact mode)

Settings > Interface > History gains "In browser" (view.history_layout dock: browser):
neither timeline is shown, and each component's History folder lists its sketches and
features in history order with the marker. Dragging the marker rolls the history back
through timeline.roll_to; Find in Timeline reveals the feature in the browser.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser history: sketches listed under their feature as in the vertical History

With Sketches: Under their feature, the history in the browser (compact mode) lists each
sketch under the first feature built from it, through the shared history_rows (#6494)
without reference rows: same rule, same fold key, so switching the History layout keeps
what is open. A drop above a row rolls back its listed sketches with it. Selecting a feature
lights the rows of its sketches, and selecting a sketch lights the features built from it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: with the history in the browser, the Sketches folder starts closed

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser history: sketch rows have the eye of their Sketches folder row

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* History in the browser: Arabic, Hebrew and Vietnamese for the layout's name

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 21:49:21 +00:00
raykholo 8e6a107f6e Lists many PRs add to: no written lengths, one file per theme (#7747) (#7898)
* Lists many PRs add to: no written lengths, one file per theme (#7747)

* xtask lists: the fixed-table allowlist in order, each with its own reason

* Lists: the wide-character blocks and the drawing scale presets as slices too (#7747)

* Lists: the drawing units test reads UNITS as a slice (#7747)
2026-10-28 21:33:34 +00:00
semmelrindeandClaude Opus 5.5 4ad18407dc Paste: leave copied body transfers out, so the design still opens (#8478)
A copied body transfer was pasted like any feature and given the target
component as its owner. A transfer belongs to the component it moves bodies
to, so the saved design was refused on open ("body transfer owner must match
its destination"), and a pasted transfer had nothing to move anyway: the
copies go into the component they are pasted into. Paste now leaves body
transfers out and says so in its notices; a clipboard of only transfers is
refused.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 21:29:05 +00:00
e6dc105134 Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151) (#5381)
* Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151)

A point cloud is kept in the design as a reference, drawn as depth-tested
dots and never a body.

- io: a PLY reader (ASCII, binary little/big endian; x, y, z of any numeric
  type, optional colours, other elements skipped; counts checked against the
  file) and XYZ/PTS text, thinned evenly past max_points. PLY meshes with
  faces can also come in through file.insert_mesh.
- doc: Document.point_clouds (shared f32 points relative to an f64 origin,
  colours, units, rigid placement, size and colour), stored as a binary
  container part; format change in pending/point-clouds.rs.
- engine: pointcloud.insert / edit / delete / list; doc.open opens a cloud as
  a new design; selection.delete takes point_clouds; view bounds include them.
- gpu: an instanced point-sprite pipeline (16 bytes a point).
- ui: Browser Point Clouds folder with eyes, menu and an Edit Point Cloud
  card; drop, Open, Insert and file dialogs take .ply/.xyz/.pts; a CPU
  viewport fallback; messages in en, en-GB, ja, zh, de and ko.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: colour by the file, one colour or height, from the UI (#5151)

The Edit Point Cloud card gets Color By (File Colors, Single Color,
Height). Height is a blue-to-red ramp over design Z, between the cloud's
own two heights or, by default, a range worked out from the points (all
but the lowest and highest 2 %, from an even sample). pointcloud.insert
and pointcloud.edit take color_by and height_range; pointcloud.list
reports them. The colour of each point is worked out in one place
(PointCloud::shade) for the GPU and CPU viewports.

Also: the card's dropdowns compare the picked index (a dropdown's
response doesn't report the pick, so File Units did not change either).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: integrate format registration and viewport caches (#5151)

* Point clouds: satisfy current UI audits and document comparisons (#5151)

Route model RGB data through the theme conversion boundary, provide a compact ribbon label, and include point clouds in the new document comparison. Gate the Unix-only CLI-link helper and test so Windows all-target checks remain buildable after the rebase.

* Point clouds: isolate translations for current main (#5151)

Move the existing 74 messages unchanged into one pending locale file and attribute it through a pending row, following the current repository workflow. Repository checks, 50 tooling tests, final workspace Clippy, wasm and generated-catalog equality checks passed after the rebase.

* Point clouds: fit the rebased code to main's GpuTarget and Frame

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Compare point clouds when reusing placement-independent results

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: complete command help and required translations (#5151)

* Point clouds: size the save cap from the raised limit after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 21:17:02 +00:00
866029aaa2 Engine: one sketch store for the sketch commands (W38.0, #5425) (#6336)
* Engine: one sketch store for the sketch commands (W38.0, #5425, no behaviour change)

The sketch commands found and kept the sketch they work on in about forty places, each its own
way. They now go through one module, cmd::sketch_store, so a drawing session (W38a/b) can put
sheet and view sketches behind the same calls without the commands changing again.

- target: the command's `sketch` param or the sketch being edited (target_sketch, moved).
- active: the sketch being edited, if any. The thirteen commands that need one keep their own
  refusal text; unifying the three texts is a separate, visible change.
- read and write: the only calls from the sketch commands to Document::sketch and sketch_mut.
- update: change a sketch on a copy of the document and keep both, the edit the text and link
  commands made by hand (sketch.text, sketch.edit_text, the projection, intersection and
  include links, sketch.fit_curves_to_section, sketch.break_link). As before, those paths
  neither solve the sketch nor run its checks.
- checked: the checks an edited sketch passes (the periodic splines), shared by edit_solved and
  sketch.offset.break.

edit and edit_solved stay in sketch.rs and load and keep their sketch through read and write.
Imported text, snap points and the face projections keep their own shape (a text that can't be
linked is skipped, snap points copy the document only when one is needed) through read and
write. The reads and writes that are about the design's own sketches stay as they are, each on
a line marked `// design-only:` (Redefine Sketch Plane, a joint's curve, a motion trace's wire,
and the session's live drag, parameter edits and `created` diff).

A source scan, each_sketch_command_goes_through_the_store, fails when a command reads or writes
a sketch, or asks for the active one, anywhere but the store or a marked design-only line in the
files that work on the design's sketches. Every existing sketch test is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: the sketch store's scan also catches the active sketch taken as a value (#5425, review of #6336)

The scan only caught `active_sketch.ok_or`, so main's `let Some(id) = s.active_sketch else …`
could have come back unseen (0xlillith's review). It now also flags the value-read forms:
`) = s.active_sketch` (let-else and if let), `=> s.active_sketch` (a match arm),
`s.active_sketch.and_then(` and `s.active_sketch.map(`. State checks (`is_some`, `is_none`,
`== Some(`), assignments and snapshot copies stay allowed.

The wider scan found five commands that hand-rolled the store's `target` rule (a `sketch` param or
the sketch being edited). They now call `sketch_store::target`: sketch.inspect, sketch.glyphs,
sketch.export_dxf, inspect.curvature_comb and inspect.minimum_radius (their `curves` form).
Their refusals become target's:
- no `sketch` and none being edited: "no sketch is being edited" (was "no such sketch (and none
  is active)", or "no such sketch" for sketch.glyphs);
- an unknown name or id: "no sketch `X`" (an unknown id used to reach "that sketch is not
  evaluated");
- a feature that is not a sketch: "`X` is not a sketch";
- a `sketch` that is neither an id nor a name (true, a list, an object): refused,
  where it used to fall back to the sketch being edited. A null `sketch` still means none given
  (the scenario harness sends one): target now reads it that way for every sketch command
  (target_reads_a_null_sketch_as_none_given).
No test, doc or schema text named the old wording; the params docs ("sketch?: id|name (default
active)") still hold.

The two remaining value reads, the default sketch for a feature (features.rs) and the sketch a
measurement prefers (measure_sel.rs), go through `sketch_store::active`, with no change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: a number in `sketch` is an exact sketch id, never a name (#5425, review of #6336)

`sketch_store::target` turned a JSON number into text and looked it up with
`Document::find_feature`, which falls back to a name when no feature has that id. So
`{"sketch": 999999}` could pick a sketch named "999999" whose id is something else, and export
or inspect it. sketch.export_dxf, sketch.glyphs and the two curvature inspects read an exact id
before they moved onto the store; the other sketch commands (the old `target_sketch`) and
sketch.inspect read a number as text.

One rule now, for every command that takes `sketch`: a number is an exact id (`as_u64`, then
the feature with that id); text is an id written out or a name, as before. A number that isn't
a whole number of 0 or more (negative, fractional) is refused with "`sketch` must be an id or a
name"; an id no feature has gives "no sketch `N`", as before. Nothing in the tests, docs,
scenarios or examples names a sketch with digits, so nothing relied on the old fallback.

Test (sketch_store): a sketch named "999999" with another id. sketch.export_dxf, sketch.glyphs
(with another sketch being edited, for its enabled check), inspect.curvature_comb and
inspect.minimum_radius (with a real curve id) refuse `{"sketch": 999999}`, find the sketch as
`"999999"` and by its own id, and refuse -1 and 1.5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: MidPoint finds its sketch through the store too (#5425, after #5011)

#5011 added a caller of the old `target_sketch` (MidPoint's `line_stays`, which swaps a point
picked after its line) after this branch's base. It now reads the sketch through
`sketch_store::target` and `sketch_store::read`, as the other sketch commands do, so a number
there is an exact id too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: standard parts fix their sketch's entities through the store (#5425, after #6376)

#6376 (a standard part's sketches are fully defined) reads the sketch being drawn straight from
the document's features, after this branch's base. `fix_all` now takes it from
`sketch_store::active` and `sketch_store::read`, as the store's scan requires, with the same
result.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: Toggle Diameter and Delete on a profile find their sketch through the store (#5425)

Two sketch commands landed on main after the store: sketch.toggle_diameter (#7729) still
called the removed sketch::target_sketch, and Delete on a picked profile (#7107) read the
sketch straight from the document. Both now go through sketch_store (target and read), and
the store's source scan passes again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch dimensioned: use the sketch store's target after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch dimensioned: read the sketch through the store

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 20:56:05 +00:00
Nathan Dane 85a60c1af6 Render output: Output editor, size presets, Check list, Copy, progress pill and result viewer (#6281) (#6433)
* Render output: size presets, Check list, Copy, progress pill, R and Esc, and the result viewer

* Complete Output GPU help translations and format choices

* Remove Output size labels already present in catalogs

* fix: compile the legacy finishing controls only for tests
2026-10-28 20:55:55 +00:00
semmelrindeandClaude Opus 5.5 683535a18f Evaluation: a pattern of another component's body follows its own component when that moves (#8467)
A pattern of bodies copies them about an axis in its component's frame,
so its copies of a root body depend on where that component is placed.
placement_digest never counted a pattern's bodies, so moving the
component kept the cached copies. Read each body through placed_body,
as Combine does.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:49:55 +00:00
semmelrindeandClaude Opus 5.5 2841210fb2 Sketch Dimension: choose horizontal or vertical from the two points' box (#7295) (#7355)
* claim: #7295

* Sketch Dimension: choose horizontal or vertical from the two points' box (#7295)

Two points or a slanted line got the aligned distance whenever the text
was between the perpendiculars through them, so straight above the middle
of nearly level points was aligned and horizontal needed a thin wedge.
Now the text position relative to the box the two span picks the type:
inside it or in its outer corners aligned, above or below horizontal,
beside it vertical. This is the rule midpoint pairs already used, so both
share auto_orientation().

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Dimension: aligned across the line, horizontal or vertical by the pull past an end

Review on #7355: the aligned length must stay the default, and the box
rule shrank its zone to a thin strip on a shallow line. Now `auto` is
the distance between the two points everywhere across from them
(between the perpendiculars through them, and a tenth of their distance
past), and only a clear pull past an end changes it: up or down from
that end gives the horizontal distance, sideways the vertical one. The
two meet on the diagonals through the end, so both zones stay wide on a
shallow or steep line. Midpoint pairs keep main's box rule.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:27:44 +00:00
froglemonade2andClaude Opus 5.5 f595f38e1c Define a named parameter inline from any value input (#4071) (#7341)
* claim: #4071

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Define a named parameter inline from any value input (#4071)

Any value input, typed or sent as a command's expression parameter, takes
`name = expression` (or `#name = expression`): the design gets the user
parameter `name` with that expression, and the input stores `name`, in the
command's one undo step.

- doc: the lexer skips a definition's `name =`, so until the design stores
  it the text evaluates as its expression and commands read and check it
  like any value. `Document::define_inline` then turns every stored
  definition (feature inputs and placements, dimension parameters, sketch
  pattern and text values, joint and coupling values, sheet metal and
  plastic rules, canvas planes) into a user parameter, the unit following
  how the input reads a bare number. A taken, reserved or empty name, two
  different values for one name, and a definition in a parameter's own
  expression or a configuration cell are refused; all or nothing.
- engine: `Session::execute` runs it after any command whose parameters
  hold definition-shaped text; the reply has `defined` (the first name,
  as `sketch.dimension` already gives) and `definitions`. A refusal fails
  the command, which leaves the design as it was.
- `parameters.change` with `new = expression` renames the parameter it
  changes (a dimension's or feature input's own, references following)
  and sets it; when the value is just `new`, it sets `new`. `changes`
  refuses definitions. `expr.evaluate` reports `defines`.
- UI: lengths keep the name when the design unit is applied; sketch text
  sends a definition as typed and previews only its value; the box corner
  and offset Distance 2 use the value; fields whose command keeps no
  expression (sketch scale, move, chamfer) refuse a definition with the
  way to name it. The dimension editor says which parameter it named.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:14:36 +00:00
Colin Faulkingham a3ee8957f4 Sketch: conic curves take their own id prefix, not the constraints' k (#6173) (#8407)
* claim: #6173

* Sketch: conic curves take the id prefix n, not the constraints' k (#6173)
2026-10-28 20:12:48 +00:00
02ac56d12f Feature windows choose Join, New Body or Cut from what the material touches (#6901) (#6903)
* claim: #6901

* Feature windows choose Join, New Body or Cut from what the material touches (#6901)

Extrude, Revolve, Loft, Sweep, Coil and the Box, Cylinder, Sphere and Torus choose
their operation by running the Join on a copy of the design off the window thread
and counting the pieces: Join when the material makes one body with what it
touches, New Body when it would be a separate piece, Cut when it lies inside a
body (Revolve and the four primitives; Extrude keeps its own Cut). The choice
changes only when a check is in, a pick in the Operation row (the shown option
included) stops it for good, and OK waits for a running check. Hidden bodies take
no part: with some hidden, the shown ones become the feature's targets.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Operation row: a pick in Extrude stops its own choice at once; ja/zh strings, gallery entry

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Operation check: contact test first, mesh volumes for Cut, OK takes the evaluated Join

Material touching no body is a New Body without running the Join (the contact
test costs 0-240 ms where the Join costs seconds on a large body). Inside is told
from display-mesh volumes instead of exact ones (8 s on a 400-hole plate). The
check evaluates the Join through Session::ahead, and OK of the same commands
takes it (Session::prime) rather than computing it again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preference: Choose the operation automatically (on by default)

Preferences > Design gets "Choose the operation automatically" (auto_operation,
on by default). Off, feature windows don't choose Join, New Body or Cut from
what their material touches: each keeps the operation it opens with (Extrude
its own Join or Cut), no check runs and OK doesn't wait for one, as before

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Arabic, Hebrew, Vietnamese and Turkish strings for the operation choice and its preference

Arabic, Hebrew and Vietnamese are complete catalogs now, and Turkish has a full
catalog, so this change's three strings get them too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Operation check: a closed window's check stops; the icon audit doesn't choose

A window's operation check kept running after the window closed, a Join on
the design for nothing, and the test harness waited for it after every step:
the icon audit, which opens every window, took ~30 min instead of ~1. The
check now runs under a Progress, and closing the window (or one that doesn't
choose) abandons it: its evaluation stops at the next feature and nothing
waits for it. The icon audit turns auto_operation off, as it only looks at
icons (75 s again).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Box placement test: the window keeps its New Body

The test #6248 added places a box that overlaps Base and expects a second body;
with #6901 the window would join or cut it. The test is about where the box
goes, so it turns auto_operation off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Join pieces: read the target lists leniently after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 19:57:27 +00:00
a95f30f186 Sketch: Center Point Arc follows the cursor clockwise or counter-clockwise (#6645) (#6664)
* claim: #6645

* Sketch: Center Point Arc follows the cursor clockwise or counter-clockwise (#6645)

The centre-point arc always ran counter-clockwise from its start; a
clockwise arc needed a typed negative sweep. The tool now tracks the
signed turn the cursor makes round the centre after the start is placed,
and its sign sets the direction of the preview, the live Sweep box and
the created arc.

sketch.arc.center_point takes `clockwise` with a clicked end: the arc is
stored counter-clockwise from the end and reversed, as a negative sweep
is, so the start keeps its radius and `<id>.start`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

* Sketch: keep the old counter-clockwise centre-point arc behind a preference (#6645)

Preferences > Sketch gets "Center point arc follows the cursor's
direction" (center_arc_follows_cursor, on). Off, the arc runs
counter-clockwise from the start whichever way the cursor went, as it
always did. Its strings are a pending locale file (en, de).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

* Sketch: Japanese and Chinese strings for the centre-point arc preference (#6645)

ja and zh are complete catalogs, so the new preference's label and tip
need them too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

* Sketch: Arabic, Hebrew and Vietnamese strings for the centre-point arc preference (#6645)

Arabic, Hebrew and Vietnamese became complete catalogs on main, so the new
preference needs them too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 19:32:13 +00:00
semmelrindeandClaude Opus 5.5 9628e60ca0 Sketch: Reverse Spline Direction (#8224) (#8414)
A new command, sketch.spline.reverse, runs a spline the other way: its
point list is reversed in place, so its last point becomes its first and
the curve keeps its path (chord-length fits, uniform clamped knots and
closed fits read the same both ways). Points and constraints stay. A
projected spline and one an offset uses or makes are refused. The
sketch's right-click menu offers it for one selected spline.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 18:56:34 +00:00
Logan NightandClaude Opus 5.5 bcdee6e0bb Sketch on a face: a round's edges that end a hair apart still close (#8284) (#8386)
* claim: #8284

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch on a face: a round's edges that end a hair apart still close (#8284)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch on a face: test both ends of a rounded loft end to end (#8284)

A square lofted to a circle with its side edges rounded, as in the
report: a sketch on either end face takes the whole face. Without the
fix the circular end fails with "face projection has a branched
boundary". Also drops a redundant term from the join tolerance.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-28 18:56:20 +00:00
austin62jakeandClaude Opus 5.5 65784cae2f Save As offers the open file's own name, not the name stored in the design (#8329) (#8354)
* claim: #8329

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* Save As offers the open file's own name (#8329)

Save As, Save As JSON and Save a Copy proposed the design's name, the one
stored inside the file. Copies of a file under other names keep the
stored name, so "Sample Plate-bug.solidcraft" was offered
"Sample Plate.sc", the same as its sibling, and one replaced the other.

Session::save_as_name() offers the stem of the open file unless the
design was renamed since it was opened or last saved, and the design's
name otherwise (a new design, or one renamed in the Browser).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-28 18:11:06 +00:00
semmelrindeandClaude Opus 5.5 003d388b78 Sketch: an arc slot is drawn without a redundant Equal on its caps (#8355) (#8395)
Each cap is tangent to both concentric sides, so its radius is already
half the gap between them and the two caps are equal. The Equal the arc
slot added between them was always redundant; it is no longer added.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 18:09:47 +00:00
6fffd745fd Insert Part: the Length list opens on the default length, with no "Default" item (#8020) (#8022)
* claim: #8020

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Insert Part: the Length list opens on the default length (#8020)

The list carried an item called "Default" above the standard lengths. It
never said which length it stood for, and one of the lengths below it
always was that length, so the list offered the same length twice under
two names. Change Part Size has always listed concrete lengths.

The item is gone and the list opens on the length the part would be given
anyway. The default cannot be worked out in the dialog, because it is not
one rule: a cap screw or bolt takes the first standard length at or above
2.5 d, a set screw the first at or above d, a dowel pin the first at or
above 4 d. parts.library now reports default_length beside each size's
table values, taken from the shape the engine would build, and the dialog
selects it; the test checks that report against what an insert without a
length is actually built to, for every size of every family.

Leaving the length alone behaves as "Default" did: a new size resolves
the list again, so M6 to M12 moves the selection from 20 to 30. A length
chosen by hand stays until the size changes.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Insert Part: the labels test skips default_length too

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 17:58:03 +00:00
Nathan Dane 293ed5fab7 Render inspector: Appearance editor with the look chain, scope, mixed values and Advanced (#6281) (#6432)
* Render inspector: selection-following appearance panel with the look chain, Applies to and edit controls

* Render appearance: Glass, Clear coat, Maps, Saved optics and Reflections sections

* Update Render navigation tests for dedicated editors

* Exercise Focus keyboard protection through the Library search field
2026-10-28 17:23:16 +00:00