3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6645e2c6 jyviko: Threads: a modelled thread's tangent flank joins are not drawn
- 970c29745 jyviko: Smooth edges: a measured crease is kept apart from a tangent display join
- 541b94a60 jyviko: Smooth edges: hide only joins inside one smooth surface (G2); draw tangent joins
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 57d48aa9f jyviko: Clippy: the kernel's and engine's warnings on develop
- b52a01e29 jyviko: Attribution: the hand-written box STL of kernel case 4561
- 15caa50d2 jyviko: CI affected crates: no truck crates are vendored any more
- c95580d04 jyviko: Smooth edges: one G1 rule on exact surfaces and pcurves
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d13300b0a jyviko: cargo fmt: the format-40 change and the rebase's export list
- 873124c49 jyviko: CI: develop runs like main; SMLib is fetched after the Rust cache is restored
- 6517d1ee6 jyviko: Arabic and Hebrew catalogs: #4414's thread direction labels out, as in every other catalog
- fddb57c0d jyviko: Thread dialog: its labels in the catalogs; Arabic and Hebrew pending messages compare in display order
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e26dc640 jyviko: The command line and the web app link SMLib by default too
- 826f36a79 jyviko: CI and releases fetch SMLib before building
- 8aea8e5a8 jyviko: Format 40: a thread's hand on tapped holes too; v0.24.0's handedness opens as hand
- 652d3a2cb jyviko: ui: main's browser picks (#4774) read the placed model through session_world
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 562a5bd33 jyviko: Formatting: rustfmt over the rebased branch
- bc15221fa jyviko: The desktop app links SMLib by default
- e476aba94 jyviko: SMLib in the browser: built with wasi-sdk for wasm32-unknown-unknown
- e1ad6ec1a jyviko: SMLib links prebuilt: one build per commit, pinned by SHA-256
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a57ce13e7 jyviko: thread: a shaft thicker than a modelled thread is refused, never turned down
- 6b9f5e0e4 jyviko: thread: main's screw direction (#4414) out; the thread's hand is the one direction
- 5fc160732 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3e9c70e26 jyviko: Cargo.lock: resolved for the merged manifests
- 6e15b9676 jyviko: engine, kernel-cases: tangent joins out of the corner-pick count; 3383 and 5024 recipes to main's rules
- 46294c7c2 jyviko: kernel: STEP placements by a transformation operator keep its axes and scales
- 3d0f6aa3f jyviko: kernel: IGES trim pieces closed onto their meeting points in main's assembly reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d63aa814f jyviko: threads: main's tapped-hole sizes and shaft turn-down on the reworked thread
- cfc393d68 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3287bcba9 jyviko: Threads with several starts
- 7bfc184e8 jyviko: A modelled thread's chamfered tip (ISO 4753)
- d433ce2c9 jyviko: Thread runouts: the groove fades out instead of stopping square
- fdede5a0a jyviko: Thread work in rustfmt's layout
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 610173e1f jyviko: combine: move each tool into its target's frame
- 3fb263d00 jyviko: hole: keep a countersink's tool within its rim above the face
- 1171c4c2a jyviko: A sheet metal body mirrored or patterned into new bodies is sheet metal (#3353)
- 5a9bf4742 jyviko: A converted sheet takes its rule's values at its own thickness (#4328)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 48abbbcc1 jyviko: kernel: a vertex a face's loops pass twice is one point of its (u, v)
- 1df330c79 jyviko: engine: a shell that opens no face makes a closed hollow body
- 5aeff43f8 jyviko: smlib: a horn or spindle torus face comes out as its NURBS form
- bd4e1926a jyviko: kernel-cases: 2928's base extrudes the ring it describes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 810f0d66d jyviko: doc: a join groups pieces that touch nothing; only edge and point contacts are kept apart
- 1d98d5111 jyviko: smlib: solids touching round a pocket each export as one closed shell
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94ee28d5c jyviko: doc: a join keeps solids that only touch as separate bodies
- 3e2b109cc jyviko: engine: feature commands take touching; a join's result notice
- ec6fa9706 jyviko: kernel: a seam with one face on both of its sides is a seam, and no pick takes it
- 19cf11ef3 jyviko: kernel-cases: ladder 07-fillets/016's second fillet rounds only its picked edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 84bd2daad jyviko: doc, engine, kernel: solid.fillet and solid.chamfer round each picked edge's tangent chain by default
- d0ff1dcfa jyviko: doc: an extrude's taper without a corner rule picks one per profile
- 5e7aba8df jyviko: loft sections matched to their neighbours
- 2752eee61 jyviko: kernel: merged topology counts no seam edge (a face on both sides of it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bcbb99005 jyviko: kernel, smlib: a blend larger than its faces is SMLib's refusal; blends take exactly the given edges
- 13e49e069 jyviko: engine: solid.fillet and solid.chamfer say they blend exactly the edges given
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 045961445 jyviko: doc: an extrude's taper saves how it closes the profile's corners
- 1b5ca02b8 jyviko: solidcraft-smlib: SMLib's tangent draft corner meets lines at an edge (fork ccc56fd and docs)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 81cef1c60 jyviko: kernel: a free ruled strip is the exact ruled surface to a far curve of its own
- 9e2c1c57c jyviko: kernel: ruled surface docs and test for the free strip's far curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- af4e97b64 jyviko: cli: the rig and the oracle reach MeshTolerance through the engine
- f7daf6124 jyviko: doc, engine: the unused revolve targets and the formatting of the exact tools
- caa5ed0e6 jyviko: kernel: twisted and scaled sweeps round corners by the plain sweep's corner model
- dead22ba7 jyviko: kernel: corner rules for direction, rails and closed paths; no feature gate on SMLib sweeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 712caf8bf jyviko: engine: no boolean retries to report; overlaps are SMLib's exact intersection
- 431c3f6d0 jyviko: doc: plastic features' tools stand on the face as drawn
- 4ca7793a3 jyviko: doc: a hole in sheet metal is a cut-out or a bore by its drill's direction
- 8d91c19f1 jyviko: brep: an intersection curve's point is a function of t alone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ba99405e2 jyviko: doc: a pattern or mirror of a pattern or mirror copies what that one made
- 386b1d123 jyviko: doc: a sweep round a closed path starts where the profile is (#3345)
- 5df8a5565 jyviko: engine: an extrude Join, Cut or Intersect leaves hidden bodies alone (#2464)
- f10dfd8d0 jyviko: kernel-cases: crossing equal holes leave each wall in two faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 02bfd6e10 bherbruck: kernel: draft through SMLib
- d20e91f8c jyviko: doc: re-anchor a stored face pick strictly inside its named face
- 36b7aa267 jyviko: solidcraft-smlib: a build without SMLib keeps the sweeps' curve lists without a dead-code error
- d22e89bcc jyviko: solidcraft-smlib: a solid touching itself along an edge comes back with every edge bounding two faces
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 714475b84 bherbruck: kernel: measure through SMLib's exact mass properties, checked against the mesh
- 07c36cfd0 bherbruck: solidcraft-smlib: Brep::chamfer_sides, and Error::Unsupported for a radius law with a corner
- ae1d746ae bherbruck: kernel: chamfers with two setbacks through SMLib
- a043e4ae2 bherbruck: kernel: an SMLib blend's corner patch comes from the edges meeting there
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a7c0109ea Brennen Herbruck: kernel: boolean runner grades the seeds against a reference volume
- 7bb74d1c6 bherbruck: kernel-cases: an smlib feature for the CLI, and no grading of a kernel the build isn't running
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
Evaluation and placement never read appearances, yet an appearance edit
re-evaluated the model and placed every occurrence again. A whole-document
proof that only appearances changed now takes the existing render-only refresh,
which keeps the model and retargets the world-placement cache.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Sketch Transform: scale, turn and move sketch entities in one command and one undo
sketch.transform scales about a centre, turns about it, then moves; the window and its
handles for existing sketch geometry build on it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch Transform window: one box with handles to scale, move and turn what is picked
Select curves and points in a sketch and press G (or Transform in the Modify panel or the
context menu): the picks get a box with a handle at each corner to scale (the opposite corner
stays), the box to move and a knob above it to turn (Shift snaps to 15 degrees). Position,
Width, Height, Scale and Angle in the window are the same values, to type exactly; OK applies
it as one step.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Move the new message to a pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Transform: follow the sketch field of Sel::SketchCurve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Each command that names a body (appearance, material, move, ...) mapped it to
its component's own name by working out every placed body's world name and
frame, so a command on a large assembly cost a walk of the whole design. The
list is now kept with the world-placement cache while it is current.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Naming a placed body scanned every occurrence and body of the design, so the
world state and every caller naming all placed bodies grew with bodies times
design size. WorldNames indexes the design once and names each body in time
proportional to its occurrence path; one naming routine serves both it and the
single-body scan. Names are unchanged (a test compares them with the scanning
implementation).
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Move the design-link path helpers into one module
`component_link.rs`'s path rules for links to other design files (base_dir,
absolute, relative, stored, resolve, rebased) move, unchanged, into
`cmd/design_link.rs` with their test, so other kinds of link (#3891's drawing
files, linked parameters #5354, #5113's extract) share them instead of copying
or re-exporting them. No change in behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* design_link: keep base_dir and relative private
Only design_link.rs uses them; the module's surface is absolute, stored, resolve and rebased (review on #5420).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* component_link: import Document after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Carel Theron <careltheron@Carels-MacBook-Pro.local>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
A cut (or intersect) that names no bodies went through every body it met,
hidden ones too: a body hidden to keep it out of the cut was cut anyway. When
some of the active component's bodies are hidden, the cut now stores the shown
ones as its targets, so the hidden bodies stay as they are, and stay so once
shown again (the model never depends on what is shown). With nothing hidden it
goes through every body it meets, as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Canvas to Sketch: trace a canvas image into a sketch on it (#3931)
New command canvas.to_sketch, offered as Canvas to Sketch in the canvas
context menu. It traces the canvas image (automatic Otsu threshold, light
drawings on dark backgrounds inverted) with interpolated marching squares
and Douglas-Peucker, and adds lines and cubic Bezier splines through Insert
SVG's add_geometry to a new sketch on the canvas plane, with the canvas'
width, centre, rotation and flip. Holes stay holes; one undo step.
The image's declared width x height is checked before decoding (at most
40 megapixels) and the decoder runs under image::Limits, since canvases
are capped by file size, not pixel count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new message to a pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #2605
* Insert SVG / DXF: place and scale the drawing before it is added (#2605, #3443)
After the file is picked, an Insert SVG (or DXF) window sets the
drawing's X, Y offset and scale, with a live preview; OK adds it in one
step and Cancel adds nothing. The insert commands already took `at`
and `scale`; the window is what was missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert scenario: the picked drawing goes through the placement window (#2605)
`sketch_toolbar_imports_use_file_picker` expected the SVG added as soon as
it was picked; it now checks the placement window first and adds it with
OK.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert SVG / DXF: a size in millimetres, an angle, and placement by the drawing's centre
sketch.insert_svg and sketch.insert_dxf take width or height (mm, aspect kept, winning over
scale), angle (degrees) and align (origin or center). The new sketch.drawing_bounds reads a
file's own size without inserting it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Insert SVG / DXF window: Width, Height and Angle, placed by the drawing's middle
Width and Height in millimetres follow the scale (aspect kept); Angle turns the drawing
about its middle, where X and Y now put it. Uses sketch.drawing_bounds for its own size.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Insert SVG / DXF: handles in the viewport to scale, move and turn the drawing
The preview gets its box with a handle at each corner (scales about the opposite corner,
aspect kept), the box itself (moves) and a knob above it (turns, Shift snaps to 15 degrees).
They edit the same X, Y, Scale and Angle the window shows.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Insert handles: the move that comes with the release counts
A quick drag could stop short of the pointer's last position because the final move arrives
in the same frame as the release.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Insert SVG / DXF: the Drawing Size command's label in the catalogs
`sketch.drawing_bounds` came without a catalog entry, which the i18n
test requires (and the complete ja and zh catalogs with it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new messages to a pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #2113
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Crash reports: capture native crashes on macOS (#2113)
A signal handler for SIGSEGV, SIGBUS, SIGILL, SIGFPE, SIGTRAP and SIGABRT
writes the same <journal>.native.json as the Windows exception filter: the
signal, the faulting module and offset, the thread and a frame-pointer walk.
The next start reports it instead of "an unclean exit". The signal then goes
on to the previous handler or the default action, so macOS still writes its
own crash report.
native_crash_macos.rs joins the crash-safety skill's list of files that may
use unsafe (no safe API can catch these signals).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5641
* Cone primitive: solid.cone with base and top radius (#5641)
A cone or truncated cone placed like the cylinder: base centre, axis,
base radius (or diameter), top radius (0, the default, is a full cone)
and height, with the new body / join / cut / intersect choice. It is
built from what the kernel already exposes, a revolve of its half
section about +Z through the origin, moved into place. Toolbar entry
after Torus, a Cone dialog that also places it on a picked face, Edit
Feature, a timeline icon, pending UI strings and attribution, and one
pending design-format change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Add Open in Slicer for the selected bodies (#2595)
One command saves the selected bodies as a 3MF in millimetres (an STL if the 3MF can not be written) and opens it in the last slicer used. It is on the File menu, the Mesh tab and the body right-click menu. The first time, or when that slicer is gone, it asks which one with the same list Save as mesh uses. The Save as mesh dialog is unchanged.
* Send slicer files to a private per-user folder (#2595)
Files sent to a slicer used to go to a shared folder in the temp directory. They now go to the user cache folder (mode 0700 on Unix), under a name that stays the same for the same design and bodies, so sending again replaces the file and the slicer can reload it. The file is written to a temporary name and renamed into place. If the name can not be replaced, as on Windows while the slicer holds the file open, the copy gets a number and the status line says so. Files older than seven days are deleted at startup. The first send tells the user that sending again replaces the open file, and so does the tooltip of Open in Slicer. Send to slicer in Save as mesh uses the same path.
* Open files in a running slicer (#2595)
PrusaSlicer, SuperSlicer, Bambu Studio and Cura are started with --single-instance, so a slicer that is already open loads the file instead of opening a second window. OrcaSlicer has no such flag and is left alone, and macOS bundles are single-instance already. PrusaSlicer 3.0 ships a launcher entry that already carries --single-instance-on-url; it keeps that one and never gets a second flag. It is a preference, on by default, and scripts can pass single_instance. Preferences also gets a button to forget the slicer Open in Slicer remembers.
* List slicers the desktop entries say open 3MF or STL (#2595)
On Linux the scan of desktop entries now also lists a program that claims 3MF or STL in MimeType, even when it is not in our table of known slicers. The table still supplies names, ids, icons and flags for the ones it knows. Entries marked NoDisplay or Hidden are skipped, and so are terminal programs and SolidCraft itself. The existing size and count limits stay. The Windows scan now looks inside a Prusa3D folder, where PrusaSlicer installs itself.
* Only start slicers the user can see or chose (#2595)
file.save_mesh took a slicer parameter that could be any executable path, so a script or an MCP client could run any program. The slicer now has to be one of the detected slicers (by id or name) or a program the user already added under Custom, which the app hands to the engine from its settings. The same rule holds for file.open_in_slicer. The agent chat already asked before any file command; its question now also names the slicer.
* Review fixes for Open in Slicer (#2595)
The file name hash keeps all 64 bits instead of 32. When Open in Slicer has to fall back to an STL, the status line now says so. The engine test that sets the chosen programs clears them again. The unused "could not make the folder" message is gone from the catalogs, and the docs say plainly that finding slicers by file type is Linux only.
* Keep unsaved designs apart and hide Open in Slicer in the browser (#2595)
Two unsaved designs with the same name and body names got the same file in the slicer folder. Every document now has a uid that is new for each New, Open and Recover and stays the same for the life of the document, and the file name uses it (with the process id) until the design has a path. At the first Save As the name changes to the path-based one, so the slicer gets one new file; the old one goes with the seven-day sweep.
The browser can not start a program, so Open in Slicer is now disabled there: the engine command reports why, the File menu item and the body and component right-click items are greyed, and starting it anyway says so on the status line instead of opening a dialog. The Save as mesh dialog keeps its browser guard for the open flow too.
* Put the Session doc comment back on Session (#2595)
The new NEXT_UID static had landed between the doc comment and the struct it describes.
* List every install of a slicer, and test the first Save As (#2595)
Detection kept one entry per known slicer, so a system PrusaSlicer 2.9 and a Flatpak 3.0 beta showed up as one. Every distinct install is listed now. The same program found twice, through a desktop entry and through PATH, is still one. When a slicer has several installs, each gets an id made from where it was found (prusa#comprusa3dprusaslicer) that stays the same on every run, and a name worked out from its command and location without running anything: PrusaSlicer (system), PrusaSlicer (Flatpak, beta), PrusaSlicer (AppImage). A lone install keeps its plain id and name. The plain id or name still picks the first install, so a remembered "prusa" keeps working. Single-instance flags and the other per-slicer behaviour go by the id without the install part.
Also a test that the first Save As changes the file name once and later sends keep the name that comes from the saved path.
* Start PrusaSlicer 3.0 first and send the file once it is ready (#2595)
PrusaSlicer 3.0 starts through slic3r-app-launcher, which ignores a file given at a cold start whatever the flag, and loads it over D-Bus when an instance is already running. A small table in slicers.rs names such slicers by their command; today it holds that launcher, so PrusaSlicer 2.9 and OrcaSlicer are untouched. Ready means a name starting with com.prusa3d.prusaslicer.BroadcastListener. is on the session bus, read from busctl --user list with no new dependency. If busctl is missing or fails, nobody waits and the file is sent as before.
When the slicer is not ready, Open in Slicer starts it without the file and looks every 200 ms for up to 10 seconds. The wait runs on another thread, so the window stays live, and the status line says Starting PrusaSlicer. Once the name appears the file is sent with the same arguments as before. If the limit passes, the status line says the slicer did not respond, that the file is already saved, and to send again. A second click during the wait only repeats the Starting line, so there is one launch and one send. Scripts calling file.open_in_slicer wait inside the command by default, or pass wait: return or no.
* Always show the slicer picker for Open in Slicer (#2595)
File > Open in Slicer, the Mesh tab entry and the right-click entry now always open the picker, with the slicer used last time pre-selected, so the usual case is one click or Enter. Scripts and file.open_in_slicer with a slicer still send without a dialog. The preference button that forgot the remembered slicer is gone: it could no longer make anything ask again, and it did not clear the pre-selection either. The guide says how it works now.
* Leave Bambu Studio out of the single-instance list (#2595)
Open files in a running slicer now adds --single-instance for PrusaSlicer, SuperSlicer and Cura only. Bambu Studio is started as it is, so it may open a second window. A test pins that, for the detected slicer and for one the user picked as a custom program. The guide and the preference tooltip no longer name Bambu Studio as getting the flag.
* Sort the English catalog and leave features.md to the generator (#2595)
cargo xtask lists wanted one message moved in en.json after the rebase. docs/features.md is written by the Generated files workflow on main, so the row I had added by hand is gone from this branch; the workflow adds Open in Slicer when it lands.
* Drop the unused folder message from the Vietnamese catalog (#2595)
Vietnamese arrived on main after I removed ui.save_mesh_temp_failed from the other catalogs, so the check that every translated id exists in English failed on it. Nothing uses the message any more.
* Say so when a started slicer can not be found again (#2595)
After Open in Slicer had started a slicer on its own, a failure to look it up again to send the file just returned, so the status line stayed on Starting and then nothing. It now says the slicer was started, that it can not be found to send the file, and where the file is saved. A test covers it.
* Say why a failed busctl ends the wait (#2595)
If busctl fails partway through a wait, the wait stops and the file is sent, the same as when busctl can not be run at all. That is on purpose: a file sent too early is dropped quietly and costs one more send. A comment in wait_for_ready says so.
* Keep the readiness wait inside its limit (#2595)
wait_until asked the probe before checking the deadline, including right after a sleep, so a yes could be accepted after the limit, and busctl ran with no timeout, so one look could outlast the whole wait. The deadline is checked first now, the probe is told how much time is left, and busctl is given at most two seconds (less near the end of a wait) and is killed after that. A hung busctl counts as not telling, which sends the file as before. This covers the first look on the UI thread too. Tests cover a slow probe, the shrinking time left, and a fake busctl that hangs, answers and fails.
* Send the file that was already written once the slicer is ready (#2595)
When the wait for a started slicer ended, the UI ran file.open_in_slicer a second time. That exported the design again on the UI thread, from whatever the session looked like by then, and could write a numbered copy while the timeout message still named the first file. The wait now keeps the slicer it found and the answer of the first call, and opens the file that was written. A test changes the design during the wait and shows the same file is sent, is not written again, no command runs, and no second file appears.
* Send with the single-instance flag after starting a slicer (#2595)
After Open in Slicer has started a launcher that needs a start first, the file has to reach the instance that is now running, so the send that follows a start carries --single-instance whatever the preference says. A normal send, to a slicer that was already up, still follows the preference. A comment in both places says why. The test uses a plain launcher command with the preference off: the normal send has no flag and the send after a start has it.
* Find the remembered slicer again after an uninstall (#2595)
With two installs the remembered key is prusa#prusaslicer. Remove the other install and the lone one is plain prusa, which matched neither the exact key nor the plain-key fallback, so the picker fell back to the first slicer in the list, maybe a different one. The key is now also matched by the part before the #, so the same slicer is pre-selected. A test covers the lone install, a plain key with two installs, an exact key, and that another slicer is never picked.
* Say a second click did not send anything while a slicer starts (#2595)
While a started slicer is being waited for, another click showed Starting <the first slicer> even when it had picked another slicer or other bodies. It now says it is still waiting for that slicer and that nothing else was sent. The test checks the wording and that it names the slicer being waited for.
* Label macOS installs by their application (#2595)
An open -a command resolved its program to /usr/bin/open, so every application on a Mac was labelled system. Labels for open commands now come from the .app path: /Applications is system and a folder under home is shown as ~/Applications. A test with two PrusaSlicer.app bundles and a made-up home checks both labels and that the ids differ.
* Pick the same place for a program found twice every time (#2595)
When two desktop files, or a desktop file and PATH, pointed at one program, the first one read was kept and its file name went into the id, so the ids could change with the order the folders were read in even though nothing was installed or removed. The place that sorts first now speaks for the program. A test with two aliases and a second install lists them with the folders in both orders and gets the same ids and commands.
* Treat flatpak run spelled two ways as one install (#2595)
flatpak run ... and /path/to/flatpak run ... with the same arguments had different install keys, so one invocation could be listed twice. The launcher is now compared by its file name and the arguments are kept, so both give the same key, while a different branch is still its own install. The test uses a real launcher file so the full-path entry is not skipped as stale.
* Say plainly that a late yes is accepted on purpose (#2595)
The comment on wait_until said a slow probe could not accept a yes that came too late. That was not what the code does: no probe is started after the limit, but one already running may finish and its yes is taken, because the file should still go. The comment now says so, with the bound: the limit plus that last probe, which in production is given the time left and so ends by the limit. A test has a probe that runs past the limit and says yes, and checks it is accepted and the wait stays within limit plus the probe time, and that a probe that says no is not followed by another.
* Give reading busctl the same deadline as running it (#2595)
After busctl exited, the output was read with a join that could wait forever if a process it left behind kept the pipe open. The reader now hands the text back over a channel and the wait uses the time that is left of the same limit, and gives up with nothing otherwise. The polling sleep no longer overshoots the time left either. A test uses a fake busctl that backgrounds a sleep with its output inherited and exits at once: the call returns within its limit.
* Tell two different flatpak launchers apart (#2595)
Comparing only the file name of the launcher made /opt/tool-a/flatpak run ... and /usr/bin/flatpak run ... with the same arguments one install even when they are different programs. The launcher is now found the way any program is, through PATH and with links followed, and its name stands in only where it can not be found. The test has flatpak on PATH and the same file by its path as one install, a different executable of the same name as a second, a different branch as a third, and the fallback when there is no PATH.
* Keep waiting when busctl is slow, send only when it is missing or fails (#2595)
Since the busctl timeout, a slow busctl came back as "can not tell", and that was read as send now. One slow look, likely just when a cold PrusaSlicer 3.0 is starting under load, ended the wait and sent the file early, which gets dropped. The look now says why it has nothing: slow means not up yet, so the wait goes on to its limit and then reports that the slicer did not respond; a missing or failing busctl still means it can not be told and the file is sent. The comments name only those two cases. Tests use fake busctl programs: one that hangs keeps the wait going to the limit and times out, a missing one sends at once, one that says not up and then fails sends, and one that names the slicer is ready.
* Do not open an empty path when the answer had no file (#2595)
If the answer kept for a started slicer had no path, the send ran open with an empty string. The tick now says there is no file to send and starts nothing. The test gives a wait with no path, checks the error line, and that the fake slicer was never run.
* Drop the unused folder message from the Danish catalog (#2595)
Danish arrived on main with ui.save_mesh_temp_failed, which this branch removed from English because nothing uses it any more, so the check that every translated id exists in English failed. The entry is gone from the Danish catalog too.
* Always start the 3.0 launcher with the single-instance flag (#2595)
A hand run showed that starting the PrusaSlicer 3.0 launcher with no file while a 3.0 is already running forwards to it and exits when the flag is there, but opens a second full window when it is not. A slow first look at the bus can start the launcher twice, and with the preference off the flag was stripped. A slicer that has to be started first now keeps the flag on that start whatever the preference says, the same reasoning as the send after a start; when nothing runs the flag does no harm. A normal send with the preference off still has none. The test covers the launcher entry, a bare launcher command, a normal send and a slicer that is not on the table.
* Swap --single-instance-on-url where it does not hand the file over (#2595)
A hand run on the PrusaSlicer 2.9.6 Flatpak showed that its entry's --single-instance-on-url does not forward a file to the running instance: every send opened a new one, three after a cold start and two sends. With plain --single-instance the second process finds the first, forwards, and exits. So when a command carries --single-instance-on-url and the slicer is not on the wait table, that is, not the 3.0 launcher, it is replaced by --single-instance, with the file markers handled as before, when the preference is on, and stripped when it is off. On the 3.0 launcher the flag does forward and stays. The comment on the rule says why. A test uses the real 2.9.6 and 3.0 Flatpak command lines.
* Cut long slicer names to fit the picker (#2595)
With installs listed on their own, a name like PrusaSlicer (Flatpak, master) is wider than its row. The list painted it with no limit, so it ran out of the popup, and the closed selector wrapped it onto a second line. The list now lays the name out on one line that ends in an ellipsis when it does not fit, the selector truncates, and the full name is in the tooltip when it was cut (for a program the user added, ahead of the delete hint). A test checks that a long name is cut to one line within the width and a short one is left alone.
* Keep the 3.0 launcher's flag on a send whatever the preference says (#2595)
A hand run with the single-instance preference off showed the 3.0 launcher needs its flag on a send too, not only on a start: a cold start with a file and no flag loaded nothing, and a send to a running 3.0 left a launcher process that never forwarded. A slicer on the wait table now gets the flag on every launch, as it already did when started alone. The doc comment says why. The preference text, in English, Japanese and Chinese, and the guide now say that PrusaSlicer 3.0 is the exception to turning this off. The tests that took the flag away with the preference off now expect it, for the launcher entry, a bare launcher command and the 3.0 Flatpak line; the test of the send in the UI checks the first send carries it.
* Keep the install-flag swap to PrusaSlicer, found by what it is (#2595)
The swap of --single-instance-on-url for --single-instance ran for any program whose command had the flag, so another program with that flag would have been rewritten. It is now a PrusaSlicer rule: it applies to a slicer recognised as PrusaSlicer by its identity, its id or, for a program the user picked, the name it goes by, never by a version number. The single-instance table uses the same identity check. A test keeps the flag of a program that is not PrusaSlicer, strips it when the preference is off, and swaps it for a picked program named PrusaSlicer.
* Do not promise a hard bound in the wait comment (#2595)
The comment on wait_until said the production probe ends by the limit. Its clock starts after the process is spawned, and killing and reaping the process and scheduling are not bounded by it, so it is a polling and read budget with process overhead on top. The comment says that. Comment only.
* Tell PrusaSlicer 2 from 3 by the installed version (#2595)
PrusaSlicer 2 and 3 need different handling, and the rules had to guess from the command line. Each install of PrusaSlicer now carries its major version, read when it is detected from the release at the top of its appstream metadata and never by running the program: a Flatpak's own files (the branch the command names, else the current one), or the metainfo file beside a desktop entry. PrusaSlicer older than 3 is sent the file with --single-instance in place of --single-instance-on-url, which does not hand a file over there, and is not waited for. PrusaSlicer 3 and newer keeps the launcher's flag, is started on its own, waited for, and sent the file. When the version can not be read, the command decides as before: the slic3r-app-launcher launcher counts as 3, and any other entry is left as it is. A program that is not PrusaSlicer is untouched whatever its flags. Tests use metadata fixtures, no Flatpak: 2.9.6, 3.0.0-alpha10, a branch that is not installed, a system package, an unreadable version with and without the launcher, and a non-PrusaSlicer program with the same flag.
* Make the busctl wait tests steady under load (#2595)
One of them failed once in a full run at its first assertion and passed alone. A script that has only just been written can fail to start (text file busy) while another test forks, and that reads as a busctl that is missing. The fake programs are now started once, patiently, with a flag they answer at once, before a test relies on them; a hanging one uses exec so it is killed cleanly. The time bounds that could trip on a busy machine are several seconds now, and the checks are on outcomes: not ready and keeps waiting, send now, and the number of looks. Thirty runs alone, thirty of the whole slicers filter and thirty of the busctl tests under eight busy loops all pass.
* Say what the busctl reader thread leaves behind (#2595)
The thread that reads busctl output is left to end when the pipe closes. A busctl that answered but left a process holding its stdout reads as slow, and every poll of such a bus can leave one blocked reader behind until that process lets go. A comment next to the thread says so. Comment only.
* Make Save as mesh a plain export (#2595)
Save as mesh asked for the bodies and the format, and could also send the file to a slicer with a checkbox and a slicer list. Sending now has its own command, so the checkbox, the list and the Send label are gone from this dialog: bodies, format, a file dialog, Save. The two settings that only the checkbox used, save_mesh_send and save_mesh_slicer, are no longer kept; a settings file that still has them loads, and they are ignored. The strings only they used are gone from the catalogs. The slicer list stays in the dialog of Open in Slicer. file.save_mesh keeps its slicer parameter for scripts. The guide describes the two as separate.
* Rename Open in Slicer to Send to Slicer (#2595)
The command sends a file to a slicer rather than opening one, and a later Send to App can share the name. File menu, Mesh tab, right-click menus, the dialog button, status lines, the guide and the English, Japanese and Chinese strings now say Send to Slicer, and the command id file.open_in_slicer is file.send_to_slicer. It is new in this change, so there is no alias. The remembered slicer is stored as send_slicer, and the question the agent chat asks says send to. Module and type names stay as they are.
* Put the send targets in one table and one send pipeline (#2595)
The known slicers, the list of slicers with a single-instance flag and the rule for slicers that must be started and waited for were three separate things. They are one table of targets now: id, label, kind, names and program files, accepted formats and the default, how the file is handed over, the single-instance flag, the version from which PrusaSlicer's on-url flag hands a file over, and the wait-for-ready rule. Programs that are not in the table are slicers with the same defaults. The kind is slicer, the only one so far; its comment says it is where a later Send to App would plug in. The send itself is one function: write the bodies, find the target, start it and wait if its rule says so, hand the file over, report. Detection and resolution take a kind. Nothing changes for what already worked.
file.save_mesh keeps its slicer parameter, now through the same function, with its export arguments and result unchanged: a cold PrusaSlicer 3 is started and waited for before the file goes, and it accepts the program path of a detected slicer as file.slicers lists it (file.slicers gives it as program). A path is accepted only when it is the program of exactly one detected target, and that target's own command and arguments run; a launcher several entries share, such as /usr/bin/flatpak, is refused as ambiguous, and any path nobody listed or chose is refused. The parameter and the code say it may be deprecated later in favour of file.send_to_slicer or a Send to App workflow, which is a possibility and not a plan.
Tests go through file.save_mesh itself for the two reported failures, a listed AppImage path and a cold PrusaSlicer 3 that is waited for, with the slicers and the busctl made up; and they check that the result and the file are what an export without a slicer gives, and that a path that is not listed, or is shared by two entries, writes nothing. The pipeline has its own tests: a cold launcher waited for, one already up, wait return, and one that never comes up. A test of save_mesh that shared a file name with another is given its own.
* Keep an AppImage's id through an upgrade (#2595)
When a slicer has several installs, each gets an id made from where it was found. For an AppImage that was its file name, which carries the version, so upgrading it changed the id and the remembered choice missed. The id is now made of the slicer's id, the fact that it is an AppImage and a short hash of its folder, so a new version that replaces the old one in the same folder keeps the id, and the same AppImage in another folder is its own install. Two versions kept side by side in one folder are two installs: while both are there, their file names are added to their ids to tell them apart.
A remembered id is found again only when it names exactly one install. An id that was one AppImage and is now two versions, or a plain id that is now several installs, is treated as not remembered, so the picker starts from the first entry as on a first run and does not quietly pick another install; a single install left of the same slicer is still found, as before. Installs that are not AppImages are told apart as before. An id from before this change no longer matches. Tests cover an upgrade, two versions side by side, a second folder, and the picker's side of each case.
* Add Open with EasyPrint to Send to Slicer
EasyPrint is Printables' slicer in the browser. It's a plain text row in
the Send to Slicer dialog, backed by a new file.open_in_easyprint
command. The command exports the bodies as a 3MF (or STL), hands them to
the host to upload to slicer.printables.com/import, and the app opens the
link that comes back. The desktop app uploads with ureq and the browser
build with fetch, so this is the one send target that works on the web.
The model leaves the machine, so the command refuses without
consent: true, the dialog asks once and remembers, and an AI agent's
request asks first. A model over 100 MB is refused before anything is
sent, and a failed upload shows as an error with the reason.
The chat's privacy note said SolidCraft sends nothing anywhere, which
isn't true any more, so it now says that about the chat. New strings are
in every catalog.
* Place Send to Slicer on the Insert Files panel
* claim: #6070
* Sketch: a changed length dimension keeps its start point, so a side grows from its first corner (#6070)
Changing a dimension's value re-solved its sketch as the smallest move from
the stored positions, which splits the change between both ends: a
rectangle side set from 40 to 60 mm grew 10 mm each way. parameters.change
now first solves a sketch whose length dimension (distance, horizontal or
vertical distance, line length) the parameter drives with that
dimension's first point held, and stores the result, so evaluation has
nothing left to move. Where holding it can't solve (a symmetry moves both
ends), evaluation solves as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5099
* Browser: a feature's eye shows or hides the bodies it made (#5099)
A row in the Browser's Features folder has an eye when the feature made
bodies that are in the design now (a patch, a box, a pattern's copies;
not a fillet, which changes bodies). It runs browser.visibility with the
new features: [id or name] (and path: for one placement of a component
placed more than once), which hides or shows those bodies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>