The hole and placement sections stay on main's Tools page and network locations on its General page; the geometry kernel section stays on the Design page. prepare_preferences refuses a kernel choice before main's checks. tests/KNOWN_FAILING_TESTS keeps solidcore's lines until rebuilt from a run on this tree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
The process runs on one kernel, so `Choice` and the routing table (`Op`, `Overrides`,
SOLIDCRAFT_KERNEL_ROUTES) go, and every call asks `route::backend()`. SOLIDCRAFT_KERNEL takes smlib or
solidcore as before.
- The preference offers solidcore and SMLib. A saved `routed` loads as solidcore without an error;
asked for now, by ui.prefs or diagnostics.kernel, it is refused. Another unknown saved value stays
as saved and runs on the default, as it did.
- diagnostics.kernel answers {choice, environment}. `smlib` on a build without the C++ kernel, wasm
included, is refused as not available, never answered by the other kernel; a saved `smlib` there
says so on the status line and the preference page.
- The conversion between kernels stays: a body computed before the choice changed still needs it, and
so do the parity tests.
The notes' translations in 6 languages and the new message's are machine-written, not reviewed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
world_state, view::bounds, home_camera and scene return Result on develop; new
main code takes that with ? or session_world. New fixtures carry the spline's
nurbs. ForeignCopy::of returns Result. occurrence_placement_with walks the path
with its moves, since the placement index holds pending_moves only.
The hlr port is separate and still to come: this commit does not compile as it
stands in crates/geom/src/hlr.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
main beb35029a (Release 0.29.0), develop 05f5e8601. Committed as resolved and
not yet compiling; fixes follow by layer.
Where the two sides could not both stay as written:
- Section caps: develop's stencil crossing count (with hatch by part) kept;
main's WINDING/NOT_CAP marking and its fs_solid_touch removed. main's #9407
test is kept and has to hold on the count.
- crates/kernel/src/prism.rs: develop's, which has no 3D prism boolean; main's
#6904 route has nothing to change there. Its test still has to be ported.
- Continuity legend: main's details card, with develop's G3/G4 classes.
- inspect.analysis one at a time: while main's "several analyses" preference is
set, turning one on leaves the others on.
- Model cache: FORMAT 8, since neither side's reader reads the other's records.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
Native files run on solidcore through its public api_files (each kernel reads the other's, in both
forms). face_points routes with Split, pcurves with Convert, and an ssi::Surface no longer needs the
C API: its arguments are checked here as the C API checks them, and the C side is made only when a
family on the C++ kernel asks. intersect, domain and evaluate have no solidcore path and refuse with
Error::NotOnSolidcore. Planar region booleans and the rig CLI no longer need the smlib feature.
Tests that exercise the C++ kernel opt in per thread (route::on_cpp), so parity tests keep comparing
two kernels instead of solidcore with itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
solidcraft-cli run --validation MODE, kernel-cases --validation=MODE and
cargo xtask kernel-cases --validation MODE (with --ladder too), so the rig
runs under each mode.
The single results form compares a whole number exactly (a count). The construction and inspect
cases gave positions and volumes as whole numbers, which the form they were written for compared
within tolerance; they are decimals now. The NPT groove fix makes ladder 06/023 pass: its golden
entry is the passing run (51 faces, 8226.4042 mm3).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
From the script's last sheet.flat_pattern result: the outline's size, its area less the
cut-outs', and the bend lines, each matched to its own one of the result's either way round.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A case's construction field names construction points, axes and planes with the point, line or
plane each must be, and results reads values out of the commands' own replies by JSON pointer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A case's expected.json may name files written to $OUT (json, csv rows, or a DXF's
entity counts and curve lengths per layer) and a command's answer by step, each
matched as a part of what was made.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9072
* MCP: --param-check checks calls to the running app (#9072)
`mcp --connect` (and `mcp` once it bridges to an app) took
`--param-check` and forwarded every call unchecked, while the app's own
session is always off. `Remote` now checks each `engine.execute` and
`engine.batch` against this server's command contracts before sending:
`strict` refuses a call, or a batch with such a step, without sending
anything, and `warn` adds `param_warnings` to the app's reply (each
step's result in a batch). A command with no contract here goes to the
app unchecked. `Auto` carries the headless session's level over when it
bridges to a late app. `batch_preflight::contracts` is the contract half
of the existing preflight, for a runner in another process.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6921
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CLI: run refuses unknown options and takes --param-check (#6921)
`solidcraft-cli run` now checks its options through `known_args`, so a
mistyped option fails instead of being ignored, and takes
`--param-check off|warn|strict` with the MCP server's words and default
`off`. `warn` prints each unknown key with a suggestion on stderr and
runs the step; `strict` stops at that step and writes nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CLI: run's option check takes --param-check; warn on timed runs as steps complete
`run` keeps #6919's (#6918) unknown-option check, with `--param-check`
among the options that take a value. `Session::run_script_timed` now
takes the same per-step callback as `run_script_each`, so `run --timings`
or `--profile` at the warn level reports a step's warnings even when a
later step fails, instead of after the script (and not at all on a
failure).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A new `continuity` area: seams whose order is certain by construction, each graded
`exact` (reads its order and not the next) at picked edges with Continuity Analysis's
default stations and tolerances: a box's crease (g0), a chamfer in place of a round (g0),
an r5 round on planes (g1), and a profile closed by a g1, g2, g3 or g4 blend curve between
lines, extruded (g1 … g4). `continuity.edges` may now be a list of points, picked as
`inspect.continuity` picks them, and `continuity.exact` asks for the order and no more.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
expected.json may give `continuity: {order: g0…g4, edges?: "blend" | "corner"}`: the
seams of each round, chamfer face or corner patch with the faces either side of the edge it
replaced, and of each corner patch with its rounds, are measured as Continuity Analysis
measures them (seam_diagnostics at its default 33 stations and default tolerances), and the
case fails naming the worst seam, its faces, the order it reaches and the next order's worst
value. The seams come from the faces' persistent names (doc::naming::blend_seams). The older
`{near, within_mm, …}` form is kept.
Every fillet-area case with a body gets its order: constant rounds and rolling corners g1,
curvature rounds g2, chamfers g0, the corner: g2 patch g2 at its seams.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151)
A point cloud is kept in the design as a reference, drawn as depth-tested
dots and never a body.
- io: a PLY reader (ASCII, binary little/big endian; x, y, z of any numeric
type, optional colours, other elements skipped; counts checked against the
file) and XYZ/PTS text, thinned evenly past max_points. PLY meshes with
faces can also come in through file.insert_mesh.
- doc: Document.point_clouds (shared f32 points relative to an f64 origin,
colours, units, rigid placement, size and colour), stored as a binary
container part; format change in pending/point-clouds.rs.
- engine: pointcloud.insert / edit / delete / list; doc.open opens a cloud as
a new design; selection.delete takes point_clouds; view bounds include them.
- gpu: an instanced point-sprite pipeline (16 bytes a point).
- ui: Browser Point Clouds folder with eyes, menu and an Edit Point Cloud
card; drop, Open, Insert and file dialogs take .ply/.xyz/.pts; a CPU
viewport fallback; messages in en, en-GB, ja, zh, de and ko.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: colour by the file, one colour or height, from the UI (#5151)
The Edit Point Cloud card gets Color By (File Colors, Single Color,
Height). Height is a blue-to-red ramp over design Z, between the cloud's
own two heights or, by default, a range worked out from the points (all
but the lowest and highest 2 %, from an even sample). pointcloud.insert
and pointcloud.edit take color_by and height_range; pointcloud.list
reports them. The colour of each point is worked out in one place
(PointCloud::shade) for the GPU and CPU viewports.
Also: the card's dropdowns compare the picked index (a dropdown's
response doesn't report the pick, so File Units did not change either).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: integrate format registration and viewport caches (#5151)
* Point clouds: satisfy current UI audits and document comparisons (#5151)
Route model RGB data through the theme conversion boundary, provide a compact ribbon label, and include point clouds in the new document comparison. Gate the Unix-only CLI-link helper and test so Windows all-target checks remain buildable after the rebase.
* Point clouds: isolate translations for current main (#5151)
Move the existing 74 messages unchanged into one pending locale file and attribute it through a pending row, following the current repository workflow. Repository checks, 50 tooling tests, final workspace Clippy, wasm and generated-catalog equality checks passed after the rebase.
* Point clouds: fit the rebased code to main's GpuTarget and Frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Compare point clouds when reusing placement-independent results
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: complete command help and required translations (#5151)
* Point clouds: size the save cap from the raised limit after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
A corner setback must reach past where the corner's rounds' contact lines
meet without one (smlib_blend_setback); short of it SMLib failed with its
own status (1001). The kernel now refuses it before SMLib runs, for the
rolling-ball corner (fillet_setback) and the curvature corner
(fillet_g2_corners) alike, naming the least: on each face at a corner of
planar faces and straight edges the two rails, r tan(psi/2) from their
edges, cross (d2 + d1 cos alpha) / sin alpha along an edge (r on faces
square to each other). Other corners stay SMLib's to refuse.
The rig's `refused` cases now name the reason (`refusal`, a part of the
message, required), so a failure for another reason no longer passes; a
`solid_or_refused` case may name one. Fillets: the setback cases and
783, 3435 pass; 1390, 896, 4782 past-a-full-round and the no-tangent-chain
case are refused for an unclear reason and fail.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4086
* Raise the largest file SolidCraft opens with a setting or launch flag (#4086)
* Translate the file size limit strings
* Size limits: design files are .sc now, .solidcraft still read
* claim: #7181
* MCP save: a folder the agent opened or saved a design in stays in scope (#7181)
The agent's default folders held the open design's folder only while that
design stayed open there, so after a new design, an opened STEP file or a
save-as elsewhere a save beside the earlier design was refused, while the
same save through the control port worked.
The MCP server now keeps, for the rest of its run, the folder of every
design file a call opened or saved (open, save, and doc.open, file.save,
file.save_as through execute or batch, path given in full) and, headless,
of every design open in its session. Such a call only succeeded because the
folder was already in scope, so naming a path adds nothing. The folders get
the open design folder's terms (inside home or temp, not hidden, hidden
entries unreachable), at most 16. Bridged, they go to the app as
design_folders, which it judges the same way.
The save tool description and docs/mcp.md say how to add a folder with
--allow-path.
* MCP scope: a design's folder is the folder its file resolves to (#7181)
A link in another folder to a design inside the agent's folders passes the
scope check, which follows it, but its own folder was what got remembered
(and, for the open design, what counted while it was open). Take the folder
of the file as the check resolves it.
* Control test: a hidden file the export format accepts (#7181)
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
Each seam now also reports the jump of the curvature's arc-length derivative across it (G3)
and of its second derivative (G4), both from the faces' exact partials, and its order: the
highest one every station meets within the tolerances (two new tolerances, defaults in the
kernel). The verdict keeps its meaning (smooth is G2 or better). inspect.continuity replies
with the new metrics, each seam's order and a count per order; the viewport widens G3 and G4
seams, the legend and the marker labels name every order in words. The Patch, Blend and
Boundary rows offer the orders the kernel's Construction table says they build. G4's words
in en, ar, de, he, ja, ko and zh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
As the app's Display Quality setting, set before the design opens so every display plan is
made at it; a level that isn't one is refused with the levels. For close-up reviews of
imported faces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: new designs save as .sc
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* New designs save as .sc; .solidcraft files still open and keep their name on Save
DESIGN_EXT is now "sc"; DESIGN_EXTS lists sc, solidcraft and solvecraft and
every open path (dialogs, drag-drop, recent files, CLI, MCP, links, the web
picker) accepts all three. Save of an opened .solidcraft file writes that
file; Save As, autosave, recovery and crash reports use .sc. Windows, macOS
and Linux register .sc alongside the older extensions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Update UI tests for the .sc default extension
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7009
* Assistant: connect the last-used agent and open the panel at start (#7009)
Two Settings > AI options, off by default: when SolidCraft starts, connect
the agent started last (once the installed agents are known; a missing one
is not swapped for another) and open the Assistant panel. Not for runs
started with --control.
A connection that never gets ready (no agent, start error, the agent ends
while starting) is a new Failed state: the header reads Connection failed
and Connect reads Retry. The control channel reports it as "failed" and
takes connect_at_start / open_at_start.
* Assistant: keep the start-up agent when a design replaces the blank one (#7009)
Opening a design over the blank design SolidCraft starts with reset its
chat and stopped the agent connected at start. A chat not asked anything
yet now starts over in place and keeps its agent. Turning AI features
off also drops a start-up connection still waiting for discovery.
* i18n: Arabic, Hebrew and Vietnamese for the start-up options (#7009)
ar, he and vi are complete catalogs on main now, so every new English
message needs them.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
expected.json `continuity`: over the tangent seams wholly within `within_mm`
of `near`, the curvature jump across them (exact surfaces, 65 stations a
seam) at most `curvature_jump_per_mm` clear (`clear_mm` along the seam) of the
vertices where two of them turn, where a neighbour's own G1 seam ends.
07/015, the box corner's three r5 rounds with corner: g2: one valid body of 10
faces within the box, its patch's twelve seams jumping at most 1e-3 per mm
clear of the hole's six corners by 1.2 mm (2.7e-4 measured; the ball corner
of 009 jumps 0.2). Its golden entry is the passing run's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Session::execute is a command span; Model::evaluate and each feature computed
(by its type) are spans; io's import, export and design read/write too; the
STEP reader's topology, pcurves and solid record.
- diagnostics.profile (contract + output schema): report, start/stop, reset,
Chrome trace file.
- A STEP/IGES import's reply carries its own profile while recording.
- Every app compiles the profiler in by default (feature `profile`);
SOLIDCRAFT_PROFILE=1 starts it.
- solidcraft-cli run/eval/bench-open --profile print the table on stderr,
--profile-out writes the trace; run --profile works on designs and STEP files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
doc: world_state, world_state_reusing, state_in_frame_at, state_in_frame, face_point_state,
face_point_names and construction_state return Result. A body that could not be placed, a
frame that could not be inverted, a sketch plane or thread axis that did not survive the
placement, or a failed placing worker used to leave things where they were without a word;
now the call fails with what could not be placed. is_placement is the one test of an
occurrence's placement (finite, a rotation that does not mirror, a translation within
1e9 mm). Opening a design names every occurrence that fails it; add_occurrence refuses
one; a joint solution that would place an occurrence outside one is not applied and the
joints placing it report it.
engine: Session::world_state returns Result and keeps a failure in its cache as it keeps a
placed model. bounds, home_camera, open_sketch_plane, the scene builders, the world
previews, frames::to_local and auto_operation pass the error on; helpers answering "not
found" take the placed model from their caller. Commands setting a placement check it
(valid_position, exploded view, fastener at a point, STEP insert matrix).
ui: panels, picks and hovers read the session's placed model through
open_meshing::session_world; a model that cannot be placed shows no placed bodies, and the
viewport says why across its bottom. Pictures and the control channel report the error.
cli, mcp: snapshots, renders, benches and the oracle report the error; the kernel-case rig
records it as the case's failure. Tests read the new Results with unwrap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The kernel has no boolean retries now, nor their diagnostics
(capture_boolean_diagnostics, BooleanDiagnostics, BooleanStrategy), nor the near-coaxial
crescent (coaxial_overlap, coaxial_candidate, with_attempt_budget). What read them goes:
- doc: FeatureResult and the evaluation cache carry no boolean diagnostics, and no "Boolean
retry" warning; the saved model no longer writes them (an older file's are ignored);
- engine: timeline.inspect / feature inspection drop `boolean_diagnostics`; fuzz runs and
the CLI fuzz summary drop their retry counts;
- inspect.interference: each pair is the bodies' Intersect, measured; the near-coaxial
crescent, the by-piece intersection of bodies in several pieces and the unverified notes
go (the command's doc no longer lists near_coaxial);
- inspect.clearance: an overlap is the bodies' Intersect, measured near its region; the pin
tries, the cut-down copies of large bodies (clipped, narrowed), the union cross-check
(union_disagrees, contradicted) and the malformed-part check (plausible) go, and the
measure near the origin passes its move's error on.
Tests: the retry test and the unit tests of the deleted checks are removed; the barrel join
test (tests/boolean_diagnostics.rs, now tests/barrel_join.rs) keeps its geometry checks;
the pin-in-bushing test expects the filleted case measured; assertions on empty diagnostics
and on near_coaxial are dropped; the corpus fixtures lose the diagnostics key and the one
retry warning.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
SMLib is the only kernel now. cargo xtask kernel-cases ran every case once
per kernel asked for (--kernel default|smlib|both), setting
SOLIDCRAFT_KERNEL per run, and wrote a column per kernel; solidcraft-cli no
longer reads that variable.
The rig and the ladder run each case once, through solidcraft-cli built with
--features smlib (cargo run passes it), and report one result per case:
--kernel and the env var are gone. Each run has an output folder (--out,
default target/kernel-cases, target/kernel-ladder for the ladder) holding
results.json (every case's full result, which --results used to write on
request) and dumps/<area>-<case>/: every case runs with
solidcraft-cli kernel-cases --dumps=<out>/dumps, so a failed SMLib call
leaves its inputs for replay.
The ladder's golden holds one entry per case: golden.json is the last
recording's smlib entries, which predate SMLib running every case (its
reason says so); record it again after the first SMLib-only run.
docs/kernel-cases.md (until the next run regenerates it),
tests/kernel-cases/README.md, docs/kernel-smlib-sweeps-shell.md (its truck
column and comparisons dropped), xtask's and solidcraft-cli's usage text:
one kernel. Nothing was run.
clippy -p xtask --all-targets: clean.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
A rig case whose SMLib call fails left nothing to replay it from: nothing called
solidcraft_smlib::set_dump_dir. `solidcraft-cli kernel-cases --dumps=DIR` now points SMLib's
dump folder at DIR/<area>-<case> before each case runs, so a failing call leaves its
arguments and B-reps there (smlib_brep_read reads them back into a scratch C program), and
turns it off after the run. Off without the flag. The kernel exposes it as
smlib_dump_dir, beside smlib_built (the CLI reaches SMLib only through the kernel).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
truck-modeling, -topology, -shapeops, -stepio and the vendored truck-geometry, -meshalgo,
-shapeops, -stepio and matext4cgmath (with their attribution rows and vendor notes) are removed.
The kernel-cases runner has one kernel, SMLib, and no build-mismatch check; a modelled thread is
cut by SMLib's exact screw-swept groove (the faceted groove path is gone).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Body::mesh / mesh_plan / mesh_of and MeshTolerance (chord, display, display_of, export_of)
replace tessellate, tessellate_with, display_mesh*, display_plan*, reference_display_mesh_angular;
every caller in kernel, doc, engine, io, ui-egui, gpu and the CLI renamed mechanically; the
truck-mesher fallback, mesh_shells*, refined* removed; Body::new orients from the planner;
truck-meshalgo dropped from Cargo.toml with the tests of its hooks. Still to fix: trait imports
in tess/*, splitface/lumps/preview/step_in/boolean_record meshalgo uses, measure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The kernel accepts `truck` (as well as unset) for its truck backend, and
`boolean_kernel()` reports that backend as `default`. The rig compared
the raw setting with that name, so a run with SOLIDCRAFT_KERNEL=truck
reported every case as "this build runs booleans on the default kernel,
not truck" instead of grading it. The rig now names unset, empty and
`truck` alike as `default`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
All operations move to SMLib at once, so the selector is no longer the booleans' own:
`SOLIDCRAFT_KERNEL=smlib|truck` (read once, unset is truck, the same refusals for an unknown
value or SMLib in a build without it) is answered by `solidcraft_kernel::backend()`
(crates/kernel/src/backend.rs), which every operation's dispatch calls. The boolean's SMLib path
moves to smlib_boolean.rs. The regression rig's kernel check (`boolean_kernel`) now answers from
the switch, and the rig and CLI set SOLIDCRAFT_KERNEL.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Two faults made simple curved solids look open (#818's blind hole: 80 open edges, a stadium
slot: 52):
- It meshed with `refine`, the measuring mesh, which splits triangles across curved faces on
their own and leaves T-junctions on the edges they share with neighbours. It now checks the
display mesh, whose faces share each edge's points.
- It matched vertices by rounding to a 1e-6 mm grid, which splits points a rounding error apart
across a cell boundary. It now joins vertices closer than `tolerance.weld_mm` (default 1e-4 mm).
Both cases now have 0 open edges, also with the weld at 1e-6 mm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
For the history areas' cases (threads, tessellation):
- A count may be an inclusive range `[min, max]`, where the geometry only bounds it (a modelled
thread's faces).
- `"watertight": true` meshes each body (chord tolerance `tolerance.mesh_mm`, default 0.01 mm)
and requires no open and no over-shared edges, with vertices matched by position.
- `"timeout_s"` gives a case longer than the run's timeout, at most 30 min.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
What the complexity ladder needs from the rig's case runner, kept in the one runner:
- A script may name a `base` case directory: that case's commands (and its own base's, up to
32 deep) run first, so a ladder case starts from the previous tier's finished part without
copying its commands. `$CASE` is each recipe's own directory; `$OUT` is the running case's
scratch directory, in its bases too.
- `missing` in expected.json reports the case as not supported yet without running it: a
capability with no command or parameter (multi-start threads, fillet setbacks) stays visible
instead of being faked with a stand-in.
- Each result carries `seconds` (the commands' own time, without process start or grading) and
`measured` (body count, face/edge/vertex counts, volume, area), for the ladder's golden.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
`"outcome": "solid_or_refused"` takes a clean refusal, or else grades the result as usual. Two
bodies that touch along a circle only (#168, #3841) have no one-solid union: a refusal or the two
bodies left apart are both right; fusing them is wrong. The two cases said opposite things
(two bodies, a refusal) and now agree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- `"shells": N` in expected.json grades the total number of shells: a body with a sealed void
holds two, and some joins keep several lumps in one body. Those cases (#3175, #3455, #3526,
#3730) are graded on validity again instead of being marked not valid.
- When SMLib's record conversion says "not supported yet" (revolved surfaces, traced intersection
curves), its check gives no verdict. That's shown but not graded, since it isn't a fault of the
body. solidcraft_kernel::SmlibCheck carries the three outcomes.
- `$OUT` in a recipe is a scratch directory outside the repository, for files a case writes. The
two STEP-export crash cases write there instead of /tmp.
- cargo xtask kernel-cases --results FILE keeps every result as JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- solidcraft-cli and solidcraft-engine forward an `smlib` feature to solidcraft-kernel/smlib, so
`cargo build -p solidcraft-cli --features smlib` gives the rig SMLib's check.
- solidcraft_kernel::boolean_kernel() says which kernel this process runs booleans on.
`default` until the SMLib switch (SOLIDCRAFT_BOOLEANS=smlib) lands and answers there. An smlib
run on a build without the switch reports "not supported yet" instead of grading the default
kernel under SMLib's name.
- An area may keep its skipped list in parts (skipped-<part>.json).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every geometry case the old kernel got wrong becomes tests/kernel-cases/<area>/<id>/: an
engine script or oracle recipe, and expected.json with the right answer, from analysis or a
hand calculation, or else the invariants. Never a kernel's output.
- solidcraft-cli kernel-cases <dir>...: runs a case and grades it. The checks are the outcome
(succeeds, or refuses cleanly), the body count, and one closed shell per body that passes the
record's structure and geometry checks and, with SMLib built, SMLib's check(All). Counts,
volume, area, centroid and box are graded where the case gives them. Each run is pass, fail,
not supported yet or crash.
- cargo xtask kernel-cases [--kernel default|smlib|both]: one process per case, so a native crash
or a hang (--timeout) is that case's result. It writes docs/kernel-cases.md: coverage per area
and source, results per kernel, and the sources looked at and skipped (<area>/skipped.json).
- solidcraft_kernel::validity and smlib_built, which the rig's checks use.
tests/kernel-cases/README.md gives the format.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6861 eval scripts on input designs
* fix(cli): evaluate scripts on the input design (#6861)
* fix(cli): validate eval options before opening inputs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
solidcraft-cli mcp setup (alias install) and Help > Connect AI assistants edit each installed
client's own configuration in place, with this program's absolute path: OpenCode, Claude Desktop,
Claude Code, Cursor, Codex, Gemini CLI, Copilot CLI, Windsurf, Zed and VS Code. Only the solidcraft
entries change; a stale path is refreshed and an entry the user changed is left alone.
Plain mcp keeps looking for the app while its headless session has no work, and says on every
tool result that it is headless when the app was not found.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4664
* Control: name the token file and spot a stale one when a call is unauthorized (#4664)
When the app refuses a token that the MCP client read from a token file,
the error now names that file, when it was written and how long ago,
without printing the token. The app also writes `<port>.pid` beside the
token file (its process id and, on Linux, its start time) and removes
both at exit; when that process has exited, the error says the token
file is stale. The process check runs only after a refusal, and the
token file itself stays one line, so existing clients keep working.
Document force-quit leftovers and the MSIX AppData redirection.
* Bench assistant: read the token out of the new ClientToken
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>