thread_display_tests sewed its M10 and M12 threads from cubic Bezier pieces approximating
helices, which lie about 1e-5 mm off the core and crest cylinders. No exact (same-parameter)
pcurve exists on the cylinder for such an edge, and SolidCraft's pcurves are exact B-splines
only. Sewing refused the core face ("no exact pcurve of a B-spline on a spline surface"). Truck
had fitted one. The thread feature makes its helices exactly, with SMLib's screw sweep, so the
test now does the same: the ISO ridge's section is screw-swept and joined to the core cylinder.
The section reaches a tenth of a pitch into the core along its flanks. ridge_volume is still the
thread's exact volume, and both display tests run unchanged, from the body as made and after a
STEP round trip. Imported edges that lie off their surfaces stay refused; they are Repair Part's
job.
The quality check's sag is now measured at the surface point nearest each triangle's centre.
Before, it was read at the mean of the corners' parameters. A closed surface's parameters are
kept within one period, so a triangle across the core's seam had corners a period apart, and
their mean read 6.27 mm off a triangle that lies on the surface.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Body::mesh / mesh_plan / mesh_of and MeshTolerance (chord, display, display_of, export_of)
replace tessellate, tessellate_with, display_mesh*, display_plan*, reference_display_mesh_angular;
every caller in kernel, doc, engine, io, ui-egui, gpu and the CLI renamed mechanically; the
truck-mesher fallback, mesh_shells*, refined* removed; Body::new orients from the planner;
truck-meshalgo dropped from Cargo.toml with the tests of its hooks. Still to fix: trait imports
in tess/*, splitface/lumps/preview/step_in/boolean_record meshalgo uses, measure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
A modelled thread as other CAD systems write it to STEP has cylinder faces trimmed by helices
that turn several times around the shaft, and cylinder faces bounded by two circles with no
seam edge. The display planner refused any face whose boundary winds around its surface, so
the whole body fell back to the reference mesher, which drew those faces with triangles across
the solid.
The planner now cuts such a face along a parameter line into one period: every loop and its
copies a period apart are clipped to the strip, and the parts of the cut line inside the face
join the pieces into closed loops, with the seam nodes made once for both sides. The cut face
is meshed by Delaunay with sag refinement, and the sag check runs once more after shaping.
Bodies with a face trimmed by more than one turn take their reference mesh (picking, measuring,
the CPU viewport) from the plan too.
Tests: an ISO M10x1.5 and M12x1.75 thread built from helices, as made and after a STEP round
trip: the display mesh stays within the tolerance of its surfaces and the thread's volume, and
has no degenerate, sliver or flipped triangles.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>