Commit Graph
128 Commits
Author SHA1 Message Date
2daf22923c Extrude preview: a cut from an empty root is no longer refused (#3085) (#3363)
* claim: #3085

* Extrude preview: a cut from an empty root is not refused (#3085)

A cut or intersect sketched where the active component has no body of
its own (the root of an assembly, or of a design whose part was
imported into a component) takes part in every body (#1234): the
command makes the cut. The Extrude preview checked the targets itself,
looked only in the active component, and showed "there is no body to
cut or intersect" beside a tool going through the part. Pressing OK
still cut, so the dialog said one thing and the model another.

The rule now lives in one place, Session::cut_takes_every_body, which
both the command and the preview ask, so they cannot disagree again.

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 22:37:31 +00:00
NOWN-DEVandClaude Opus 5.5 50313d147f solid.mirror: copies join their source's component; follow the saved placement (#1938)
* solid.mirror: copies join their source's component; follow the saved placement

Three follow-ups to mirroring bodies of placed components:

- A copy joins the component of the body it mirrors (or, when that
  component is placed more than once and a copy there would show at
  every placement, the innermost component around it placed once), so
  checks that group bodies by component see it beside its source.
- The saved placement path, not the body's name, says which component
  a mirrored body is in: inserting the same file again reuses the body
  names, and the copies of the first insert vanished.
- The mirror is evaluated again only when its own placements or its
  component's frame change, not on every occurrence move: each later
  command paid for one more mirror evaluation.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* solid.mirror: a saved placement must still lead to the body's component

A stale or edited placement path that leads to another component's
occurrence mirrored the body silently where that other component is
placed. The mirror now reports that the placement no longer exists.

The body's component comes from the evaluated body where a transfer
recorded it, else from the component its name is recorded in or its
feature's. When a later insert of the same file has taken over the name
(the recorded component lies outside the components the body's own
feature made), the placement has to lie inside those components instead,
so mirrors of the first insert keep working.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* solid.mirror: the copies' component change is a pending format change

v26 shipped in 0.15.0, so its mirror-placements note stays as released;
the change of where a Mirror with placements puts its copies is noted in
a new pending file instead.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 18:56:36 +00:00
bherbruckandClaude Opus 5.5 971b223246 Thread: turn a shaft thicker than a modelled thread down to its major diameter (#4256)
* Thread: turn a shaft thicker than a modelled thread down to its major diameter

A modelled external thread on a shaft thicker than the thread no longer refuses: the shaft
is turned down to the major diameter over the threaded length (run past a free end of the
face), then the thread is cut as before. The turned face is named F<n>:turned and the step
it leaves F<n>:shoulder:start/end. A shaft the part goes on around is refused rather than
cut into, shafts under the minor diameter and cosmetic threads on thicker shafts are still
refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Thread preview test: an 8 mm shaft is turned down for M6; M10 still refused

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 08:27:18 -04:00
raykholo 9db39f3d7d Holes from a sketch on a body's face drill that body (#2882) (#3770)
* claim: #2882

* Holes from a sketch on a body's face drill that body (#2882)

A multi-point hole from a sketch attached to a body's face chose its
side and moved its points onto whichever body lay along the direction,
then cut every body, so points on a front body's face could drill the
body behind it. `targets` was accepted and ignored.

- solid.hole: holes at the points of a sketch on a body's face store
  that body as their participant (the lookup a face-sketch Join uses);
  `targets` sets the bodies to drill, `["*"]` every body; explicit
  participants still override.
- Evaluation: for sketch-point holes with participants, the drilling
  side, the surface each point moves onto and pattern copies are found
  on those bodies only.

Sketches on planes, position and Single holes, and saved holes without
participants recompute as before; no design-format change.
2026-10-21 00:58:43 +00:00
raykholo 9b80163421 Extrudes from a nested STEP part's face join and cut it with the imported root active (#3223, #2872) (#3852)
* claim: #3223

* Extrudes from a nested STEP part's face join and cut it with the imported root active (#3223, #2872)

Opening a STEP assembly leaves its root component active, and the root
owns no body: its parts are components inside it. A profile sketched on
such a part's face was therefore treated as outside the active scope.
Join made a separate body instead of joining the part, and the automatic
operation saw no material and offered New Body in either direction; an
automatic extrude that came out as a cut found nothing to cut.

A component with no body of its own now works on the bodies of the
components inside it whose geometry lies in its own frame (as an import
places them): Join targets the body whose face the sketch is on, the
automatic operation looks at those bodies, and an extrude whose own
operation is Cut or Intersect takes part in every body as an explicit
cut already did.
2026-10-21 00:54:16 +00:00
Matthew KnutsonandClaude Opus 5.5 453c6bcb14 Split schema contracts per command file and add shared field types (#2829) (#3558)
* Split the schema contracts into one module per command file

`schema/commands.rs` becomes `schema/features.rs` (solid.box, solid.extrude,
FeatureResult) and `schema/inspect.rs` (engine.describe), each with its own
tests file holding its `schemas_and_the_key_check_agree` key lists and its
`strict_keeps_todays_errors` cases, so conversions of different command files
touch different files. The shared loops become helpers in `schema/tests.rs`;
the assertions are unchanged. `engine.describe` gains a key-list test, and
`schema_defaults_are_valid` now covers every command with a contract.

No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Add shared schema field types for the next conversions

For the feature commands to be converted next, each deciding acceptance with
the reader the handlers already use:

- `FaceRef` and `FaceRefs` (`face::face_ref`, `features::face_points`)
- `EdgeRef` and `EdgeRefs` (`features::edge_points`)
- `SketchRef` (`features::sketch_id`)
- `FeatureCommon`: `name`, `body_name`, `body_names` and `participants`,
  which `add_feature` reads for every feature, flattened into a contract
  with `deserialize_with = "feature_common"`, which keeps the key in the
  message and the issue's path.

The shape checks of `face_ref`, `edge_points` and `sketch_id` (and
`feature_sketch`) move into pure helpers (`face_ref_form`, `edge_ref_form`,
`sketch_key`) that the handlers and the types share; the handlers behave as
before. Tests check that each type and its schema accept what the reader
accepts (apart from a face name's byte cap and an index written `1.0`),
that the contract's messages match the handlers' errors, and that the
handlers still look picks up one at a time.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:54:13 +00:00
953fd7d5f8 Typed parameter contracts and JSON Schemas for solid.box and solid.extrude (#2829) (#2611)
* Spike: typed parameter contracts and JSON Schemas for solid.box and solid.extrude

The schema RFC's spike (plan/schema-spike.md). solid.box and solid.extrude get
typed contracts with generated JSON Schemas (2020-12), checked in front of the
unchanged handlers by a per-session level: off (the default, which changes
nothing), warn (the call runs and gains param_warnings) or strict (the call is
refused and the design left alone). Also engine.describe and the MCP tool
describe_command, `solidcraft-cli mcp --param-check off|warn|strict`, a
FeatureResult type for feature replies, and an env-var audit recorder
(SOLIDCRAFT_PARAM_AUDIT) used to check the contracts against every test.

Local spike branch; not for upstream as is (see the results report).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Parameter contracts: put the audit recorder behind a feature; drop two ignored test keys

The audit recorder is now on only in a build with the engine's `param-audit` feature
and `SOLIDCRAFT_PARAM_AUDIT` set. Its code is still compiled, linted and tested without
the feature. `scripts/param_audit.py` summarises a test run's audit logs, and the schema
module's docs give the steps for converting a further command.

Two tests passed keys their command ignores, which the audit found: `position` on
`solid.box` (`hole_face_tests.rs`) and `symmetric` on `solid.extrude` (`face_tests.rs`).
Both are removed, so the tests build what they always did. Comments no longer call
the contracts a spike.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 10:45:08 +00:00
Colin Faulkinghamandbherbruck fa3ada1983 claim: #2708 (#2739)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:25:05 +00:00
14b7529465 Loft guide rails (#201) (#3371)
* kernel: loft guide rails (#201)

A loft follows one or two guide rails between its sections: stations are added between each two
sections, each the plain loft there moved so that the point a rail guides lands where the rail
crosses the station's plane — turned about the loft's direction and scaled (or stretched across
to the rail) with one rail, carried, turned and sized between two. The sections and caps stay
exact; the smooth loft runs through sections and stations. Solid and sheet lofts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* doc, engine: solid.loft and surface.loft take guide rails (#201)

`rails` (one or two {sketch, curves}) and `rail_fit` (scale | stretch), stored on Loft and
SurfaceLoft (one pending format note), parsed by the sweep's rail parser (now shared) and built
through the kernel's railed loft. Rails on a loft to a point, or on a surface loft with edge
sections or end continuity, are refused as not supported yet. The rails' sketches are walked as
the feature's references and their components placed like a sweep's.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ui: Rail, Second Rail and Rail Fit in the Loft and Surface Loft dialogs (#201)

The rail inputs and fit row the sweep dialogs have, shared through dialogs_sweep; Edit Feature
brings the rails back.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* docs(roadmap): loft guide rails (#201)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* loft rails: review clean-ups (#201)

- Sweep and loft rails share one turn-and-size map (`sweep_path::rail_frame`).
- A station's middle and the loft's direction come from one curve through the sections'
  middles (exact derivative) instead of two more plain-loft evaluations per station; at most
  33 wires, so railed faces stay light.
- Nearest points on a section use `param_on` (kept only where the search comes nearer); the
  size uses `Aabb3`; one B-spline builder; anchors keep their nudge.
- The railed and plain lofts share one path in `loft_with_rails` and `loft_sheet_with_rails`.
- The engine leaves the not-yet-supported refusals to the design's evaluation; both lofts start
  their rails from the first section's first point.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* loft rails: refuse rails on sections with holes, with a test (#201)

Main's lofts now take sections with holes (#2447); rails shape only the
outlines, so a railed loft of rings is refused until the rails carry the
holes too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 03:22:30 +00:00
fkirill 3ffd8efffc Loft: preserve holes through matching sketch sections (#2435) (#2447)
Rebase the complete PR change onto current main, preserving changes previously stored in merge commits.
2026-10-19 23:57:07 +00:00
CamWightandClaude Opus 5.5 d306d6e658 Two-sided extrudes: through all (or To Object) on either side, a distance on the other (#2700) (#2728)
* claim: #2700

* Two-sided extrudes: the second distance goes the other way from the first side, either way round (#2700)

extent_sides ignored `direction` when an extrude had `distance2`, so through all with
`direction: negative` and a second distance went the positive way. The second distance now goes
opposite the first side wherever that went (direction: negative, a negative distance, a To
Object below the sketch). A pending format step makes older designs' reversed two-sided
extrudes positive, which keeps their shape.

The Extrude dialog's Two Sides shows Distance 2 for every extent type (it was hidden for All and
To Object but still sent as 10 mm) and offers Reverse; the second arrow points the other way
from the first.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* The two-sided arrows test checks each tip against the sketch, not just their order

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 16:05:45 -04:00
leValdemar19andClaude Opus 5.5 86b2b97d6f Sketch Offset: constrain to the ends of an offset spline (#2424) (#2615)
* claim: #2424

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Offset: constrain to the ends of an offset spline (#2424)

An associated offset spline hid all of its generated fit nodes, its two
end points included, so nothing snapped to them, and a curve drawn from
one shared the node and was refused ("invalid offset output point roles").

- An open offset's end points are shown and snapped to again; its
  interior fit nodes stay private.
- After every sketch edit, a curve that took an offset node gets its own
  point there, coincident with the node: the offset keeps sole ownership
  and the curve follows the offset when its source moves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Scenario: lines snap to and close onto an offset spline's ends (#2424)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:43 -04:00
Loohi 9c7afb6076 Single hole follows its sketch point (#2110) (#2336)
Thanks @Loohi.
2026-10-18 11:35:15 -04:00
Artem Sushchev a4c4b411e5 Combine: a cut keeps a body joined from separate pieces in one body (#2247)
Thanks @H1D.
2026-10-18 06:02:44 -04:00
Koschtetnix 487aa64e10 Multi profile extrusion performance (#2064)
Thanks @Koschtetnix.
2026-10-17 18:30:52 -04:00
NOWN-DEV 2831426c51 solid.mirror: mirror bodies of placed components where they are shown (#1896)
Thanks @NOWN-DEV.
2026-10-17 04:08:22 -04:00
Irakli Kourtis 98ce6a4ee8 Sweep guide rails and two-rail sweep (#771) (#1806)
Thanks @jyviko.
2026-10-17 04:07:46 -04:00
Nathan Dane 64966bab88 Implement the reviewed UI icon system and durable review workflow (#853)
Thanks @Nathan-Dane.
2026-10-17 04:07:16 -04:00
Colin Faulkingham da65b4fc8c Thread: suggest cylinder size and expose metric diameter and pitch (#1759)
Thanks @cfaulkingham.
2026-10-16 12:26:23 -04:00
DuBearte dd5278a402 solid.hole: position takes length expressions and follows them (#1678) (#1683)
Thanks @DuBearte.
2026-10-16 08:26:23 -04:00
DuBearte 4d58d3bbca Extrude: to an object through the body, the automatic operation is Cut (#1633) (#1636)
Thanks @DuBearte.
2026-10-16 06:26:35 -04:00
midasdf bbd4f29ebb Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)
Thanks @midasdf.
2026-10-16 06:26:27 -04:00
phanoob 9bb65b4d68 Booleans: a prism cut beside the target's other faces takes the exact 2D route in a column (#1629)
Thanks @phanoob.
2026-10-16 03:26:13 -04:00
Karl Von Richter 9422853cf9 Feature mirrors and patterns: preserve replay and add Flip/Center placement (#1619)
Thanks @Karl-VonRichter.
2026-10-16 03:01:00 -04:00
DuBearte 6f270f6259 Split Body: a sketch line as the splitting tool (#1552) (#1592)
Thanks @DuBearte.
2026-10-16 01:35:15 -04:00
JIJINBEI 44968dbfe6 Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)
Thanks @jijinbei.
2026-10-16 00:28:12 -04:00
DuBearte 987f0be21e Sketch: infinite construction lines (#1359) (#1547)
Thanks @DuBearte.
2026-10-15 22:54:16 -04:00
Colin Faulkingham 7ef78f960a Fix perpendicular fillets after connected rounds (#1581)
Thanks @cfaulkingham.
2026-10-15 22:40:09 -04:00
Erikas a422fb1a4b solid.mirror: a plane's {origin} takes length expressions and follows them (#1492) (#1501)
Thanks @erkexzcx.
2026-10-15 22:37:08 -04:00
Mateusz SychandClaude Sonnet 5.5 a6742180a9 Join from a sketch on a body's face joins that body (#1349) (#1526)
Thanks @SychPL for the fix.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-15 21:27:35 -04:00
bherbruck 4823c293dd A cut from a component without bodies cuts the parts it meets (#1234) (#1407) 2026-10-15 10:27:27 -04:00
Karl Von Richter 8a6332be83 Fix face Extrude Join targets in assemblies (#1375)
A new face-based Extrude Join (and outward Press Pull) joins the picked face's body by default and stores that scope, so an edge-touching neighbour is no longer tried first or absorbed. Explicit targets and participants still win. Related to #226.
2026-10-15 08:33:48 -04:00
Irakli Kourtis 5fa8e7d60a Sweep: orientation, twist and end scale (#1269)
Part of #771 and #772. solid.sweep and surface.sweep take orientation (perpendicular, parallel or a direction), twist (up to 4 turns) and end scale (0.01 to 100), applied about the profile's normal through the path's start; default options run the old sweep, so existing sweeps are unchanged. New fields are optional, left out when unset and noted under format 21; twist and scale are model parameters. Both sweep dialogs get Orientation, Twist and End Scale rows; labels in every catalog. Checked on main + this branch: cargo check --workspace, kernel/engine/UI sweep tests, the doc suite and the robustness goldens.
2026-10-15 06:24:31 -04:00
Karl Von RichterandKarl-VonRichter 1ec33fcdc7 Extrude: a symmetric distance is the total thickness (#1260)
A symmetric solid extrude of 10 mm is now 10 mm thick, 5 mm each side of the sketch plane, and switching from One Side to Symmetric keeps the thickness entered. Under format 21 the extent records its convention; designs saved without it keep the per-side reading, so their geometry and parameters don't change. Fixes #1236.

Co-authored-by: Karl-VonRichter <Karl-VonRichter@users.noreply.github.com>
2026-10-15 01:19:55 -04:00
bherbruckandClaude Opus 5.5 ed22d663e4 Smart Extrude: direction from the picked side, and a Cut stays a Cut (#1257) (#1261)
* Smart Extrude: direction from the picked side, Cut into a body stays a Cut (#1257)

- A sketch profile (or a thin extrude's curve) extrudes toward the side it was
  picked from: from the bottom view it goes down. Body faces still go outward.
- The automatic operation is latched per side of the profile: a drag that starts
  into a body is a Cut and stays one past the far side; a Join does not become a
  Cut when it reaches another body. Passing through zero decides afresh for the
  new side.
- An explicit operation, Direction or Reverse ends the automatic choices.
- auto_operation also looks just past the profile, so a long cut through a body
  reads as a Cut from the start (the engine's operation: "auto" too).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Scenario s07: the XZ profile seen from behind now extrudes toward the camera

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 21:31:10 -04:00
NOWN-DEV 5c6f70cc00 Faces by name in the face commands; model.faces gives a point on each face (#1243) 2026-10-14 20:18:13 -04:00
Lasse Lian 6df69e9def Thin Extrude: walls of a set thickness along sketch curves (#721) (#991)
Thin Extrude builds walls of a set thickness along sketch curves, open chains and closed loops, with the wall centred, inside, outside or on both sides at two thicknesses. Saved under format 20 (thin on an Extrude); an extrude without thin saves as before. Closes #721.
2026-10-14 11:46:16 -04:00
Mateusz SychandSychPL cf9d7772f1 To / From Object finds a target in another, moved component (#993)
Fixes #928. Extrude To / From Object and Revolve To Object now resolve their target in the feature's own component frame, so a face in another component whose occurrence is moved is found where it is shown instead of the extrude stopping at a flat plane through the picked point. The point is named after the nearest face, a named point keeps its named face when another component touches it there, and such features re-evaluate when a placement changes, so they follow the target when it moves later.

Co-authored-by: SychPL <SychPL@users.noreply.github.com>
2026-10-14 04:41:59 -04:00
midasdfandmidasdf 6e84c03946 Curvature-continuous (G2) fillets for straight planar edges (#862)
Fillet gets a Curvature (G2) radius type (type: "curvature", alias "g2"): a quintic blend whose size is the equivalent circular setback, for convex and concave straight edges between planar faces with a perpendicular planar end face at each end. Unsupported cases are refused rather than falling back to a circular fillet, and a blend that would cross a loop in its end face is refused. Persisted as a fillet style under format 19; labels in en/de/ja/ko/zh.

Co-authored-by: midasdf <midasdf@users.noreply.github.com>
2026-10-14 04:26:53 -04:00
bherbruckandClaude Opus 5.5 b34d45233d Holes on round faces from the app, and Flip for holes at sketch points (#980)
* Holes on round faces from the app, one hole per pick, and Flip for holes at sketch points (#967)

The Hole dialog takes any face: a hole on a round face drills against the face's normal where it
was picked, and its arrow shows that. A round face split at its seam is picked whole, but makes
one hole where it was clicked. Holes at sketch points get Flip (saved as flip in the hole's points,
under format 18), in the command and in the dialog.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Holes at sketch points show their arrow: into the part, or away with Flip (#967)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 02:10:09 -04:00
bherbruckandClaude Opus 5.5 1ff16cc72b A hole on a face drills into the material, also in older designs (#950) (#952)
* Hole matrix: placement, types, extents, edits and 0.9.0 designs, with today's failures listed

Each case checks the drill goes into the material, the bore sits on its axis, a blind hole stops
where it should, the removed volume against its analytic value, the face count and that every
body is still one closed valid solid. Failing cases are listed in tests/hole_matrix/known_failures.txt
as a ratchet.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* A hole on a face drills into the material, also in older designs (#950)

Without a direction, solid.hole took the direction from any face whose infinite plane passed
within ten tolerances of the point, the last one found winning: the far side of a thin plate or a
face of another body at the same height could set it, and the wrong direction was saved. It now
uses the face nearest the point, against its outward normal (exact for planes, cylinders and
spheres, so holes on curved faces work without a direction). When a design is evaluated, a face
hole whose saved direction leaves the face it starts on is mirrored into it, so designs saved
with the wrong direction drill into the part.

Fixes #950.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Hole at a point on no face (a planar face's centroid outside it) keeps the plane it lies in

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Record the hole direction fix in the goldens and the action matrix baseline (#950)

Seeds 7, 21, 81 and 85 drill their holes straight into their faces now. In the action matrix,
holes on four faces that used to go the wrong way now build, and two whose correct direction
meets a cut the kernel refuses are marked failing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Goldens: seeds 7, 21 and 85 drill their holes straight in (#950)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 01:45:11 -04:00
Irakli Kourtis 2eb292dd4a Surface Revolve: sheets turned from open curves and profiles (#824)
Surface Revolve turns open curves and closed profile boundaries about a sketch axis into surface bodies, with cone apexes and sphere poles where a chain ends on the axis, and a closed shell made solid. Adds the SurfaceRevolve feature (format 18 note), the surface.revolve command, a dialog with Edit Feature support and analytic kernel and engine tests.

Part of #757.
2026-10-13 20:30:41 -04:00
Que fe07f79387 fix: a hole at sketch points drills into the part its sketch touches (#910)
Hole centres from a sketch now drill into the material on whichever side of the sketch plane it lies: material the spot starts in wins, then the nearest body ahead, else against the sketch normal as before. A sketch on a part's underside or below it now drills up into the part. Covers counterbores, through-all, edge and corner centres, patterns and reopening.
2026-10-13 19:53:21 -04:00
Irakli Kourtis b52d4390a0 face.delete heal: false leaves an open surface body (#861)
Delete Face takes heal (default true, as before). With heal: false the picked faces are removed and the gap stays open, leaving the remaining faces as a surface body (kernel remove_faces); deleting every face is refused. Saved only when false, noted under format 18.
2026-10-13 19:53:17 -04:00
HiroKenEz 69050c81d9 Fillet and chamfer: refuse an edge pick far from every edge (#820)
Fixes #783.
2026-10-13 16:29:33 -04:00
Irakli KourtisandClaude Opus 5.5 e540832626 Surface Extrude: sheets from open curves and profile walls (#815)
surface.extrude sweeps open curve chains and profile boundaries along the sketch normal into a surface body (walls only, no caps). Saved under format 17.

Refs #757

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 14:54:38 -04:00
Irakli Kourtis 5267c96ab2 feat: drag a fillet's radius spline by its handles on the edge (#752)
A spline fillet's radius can now be dragged by handles on the edge, and the spline radius saves under format 17.
2026-10-13 12:35:42 -04:00
semmelrinde dfa9e094cd fix: a size worked out from a bare diameter keeps its unit when the design's units change (#716) (#779)
A size typed as a bare diameter now keeps the design's length unit, so it no longer changes when the design's units change. Fixes #716.
2026-10-13 12:35:25 -04:00
Irakli Kourtis 1d30e4e1d2 feat: fillet radius tapers along an edge to the room there (#749)
Adds `fit: taper` to Fillet: where a constant radius doesn't fit along a straight edge, it follows the room there as a smooth spline, down to zero where a face closes to a point. Taper to Fit is in the Fillet dialog, and the feature's warning says how far it tapered.
2026-10-13 11:45:33 -04:00
William Dunn ff609bc320 Make SolveApp::start honour a command's enabled flag, and disable solid.move inside a sketch (#740)
`SolveApp::start` now honours a command's enabled flag, so shortcuts, the command palette and the control channel can't start a disabled command, and Move is disabled while a sketch is open.
2026-10-13 11:43:45 -04:00