Commit Graph
372 Commits
Author SHA1 Message Date
fkirill 983fbe2b14 Fix lip and groove on round objects (#2751) (#2790)
Thanks @fkirill.
2026-10-19 16:34:50 -04:00
02c77df5f7 inspect.clearance: mesh each body once per check instead of once per pair (#2867)
* inspect.clearance: pairs whose bodies did not change are not measured again

Each clearance check measured every close pair again, though between two
checks usually only a few bodies change or move. Results are now kept per pair,
keyed by both bodies' geometry and placement and the check's settings; a pair
whose two bodies are unchanged is taken from that cache. With 40 overlapping
parts, a check after moving one of them took 0.8 s instead of 23 s (741 of 780
pairs reused). Pairs that could not be worked out are tried again each time.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: boxes and placed keys exactly as before the reuse

The pair boxes are taken over the mesh's triangles with finite corners, as a
distance shape's are, so pruning is unchanged. A placed body's identity now
includes its model body's own frame, so two placements are never mistaken for
one another.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: a large body is meshed once for all its pairs

Each pair that touches cuts the larger body down to the pair's region with a
kernel boolean, and that boolean meshed the whole body twice: once for its
checks and once inside the intersection. A sheet with 600 faces paid about
2.5 s per pair for meshes that were the same every time.

A body can now keep its meshes for reuse (Body::keeping_meshes); its booleans
take the meshes from there, and the intersection takes its shell meshes
from there too (truck-shapeops: and_with_history_meshed). Clearance uses such
copies for one check. Results are unchanged to the bit. On a 3 x 2 m sheet
with bends and 300 holes, the clip took 0.23 s per pair instead of 2.6 s, and
24 rivets took 5.6 s instead of 16.5 s.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:14:24 -04:00
rlartot 31b41978fc Construction geometry on model vertices follows them when a parameter moves them (#568) (#2409)
Thanks @rlartot.
2026-10-19 16:11:38 -04:00
rlartotandClaude Sonnet 5.5 f42c068063 Hole: size the tool by the body it drills, not the largest body (#2904) (#2975)
* claim: #2904

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* Hole: size the tool by the bodies its axis meets (#2904)

hole_tools_and_prisms sized the tool (reach above the face, depth of a
through hole) by the largest body of the whole model, so a large body far
away changed a countersink's outline and the volume it removed. Use the
largest body the axis meets, falling back to the model as before.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-19 16:11:35 -04:00
NOWN-DEV b0b59480eb Joints: relations that tie part of a placement (#2497)
Joints can tie part of a placement: parallel, angle, point on plane and more (#2496).
2026-10-19 16:08:23 -04:00
NOWN-DEV 473f1e6516 Sheet metal: readable face names from the sheet itself (#2275)
Sheet metal faces get readable names (#2272).
2026-10-19 16:08:01 -04:00
CamWightandClaude Opus 5.5 d306d6e658 Two-sided extrudes: through all (or To Object) on either side, a distance on the other (#2700) (#2728)
* claim: #2700

* Two-sided extrudes: the second distance goes the other way from the first side, either way round (#2700)

extent_sides ignored `direction` when an extrude had `distance2`, so through all with
`direction: negative` and a second distance went the positive way. The second distance now goes
opposite the first side wherever that went (direction: negative, a negative distance, a To
Object below the sketch). A pending format step makes older designs' reversed two-sided
extrudes positive, which keeps their shape.

The Extrude dialog's Two Sides shows Distance 2 for every extent type (it was hidden for All and
To Object but still sent as 10 mm) and offers Reverse; the second arrow points the other way
from the first.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* The two-sided arrows test checks each tip against the sketch, not just their order

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 16:05:45 -04:00
99d8d382b9 Bill of materials: part properties on components and assembly.bom (#1888) (#1899)
* Bill of materials: part properties on components and assembly.bom

A component definition now carries part properties (part number,
description, revision, other tools' keys) and free text properties,
saved with the component and shared by its occurrences.
component.metadata and component.metadata.set read and change them in
one undo step; Paste New copies them; parts.insert numbers standard
parts from their standard and size, and parts.resize renumbers them.

assembly.bom counts the placed components (flat: parts at any depth
through their subassemblies; top: direct children), grouped by part
number or by definition, sorted by part number, and writes CSV (fixed,
quoted columns) or JSON. The app gets a Bill of Materials window on the
INSPECT panel that lists, edits and exports the rows.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: name a merged row's equal definitions once

Two standard parts with the same size are separate definitions with the
same name; their row now reads "SHCS M6x20" instead of repeating it.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Window widths test: close the Bill of Materials window between commands

The test closes the floating windows a command opens before starting
the next one; the Bill of Materials window was left open and measured
against the next dialogs' limits.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: sub-parts in their part's row, and part properties without re-evaluating

assembly.bom takes group_children: true. A part with a part number keeps
what is placed inside it (a bolt's washer and nut) in its own row, listed
under it as children (items 1.1, 1.2, with each and count) instead of rows
of their own; bolts with different contents stay different rows, and
total_occurrences is the same either way. The window has a switch for it
and shows the children under their part; the CSV lists them after their row.

Changing part properties re-evaluated the model, re-seated every joint and
rebuilt the placed model: 361 ms per change with 30 jointed bolts. A change
that only touches components' metadata and properties now takes the same
path as a render-only change (proved on the whole Document), also for its
undo and redo: 0.6 ms.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: look the structure up once, not per subassembly

Deciding whether a subassembly is a part (it has bodies of its own) scanned
every body of the model for each subassembly, and each body looked up its
feature by a linear search of the timeline: subassemblies × bodies × features.
assembly.bom now indexes the placements, the body owners
(Document::body_owners: one pass over the bodies with the timeline in a map,
the same rule as model_body_component) and the numbered components once per
call. 600 bodies and features with 60 subassemblies: 8.1 ms → 1.3 ms; the
old cost grows with the cube of the design's size.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:39 -04:00
1cd9983c8f Surface trim: projected curves, several kept regions, mutual trim (#767) (#1466)
* kernel: trim keeps picked regions, mutual trim, curves swept along a direction (#767)

Trim moves to surface_trim.rs: TrimKeep::Side (the old behaviour) or
Regions (the connected pieces the points pick, parted where the tool runs
along an edge). mutual_trim cuts two one-face surfaces by each other's
surface, extending one that stops short when asked. SplitTool::Curves takes
a sweep direction; a closed curve's field is signed by inside/outside
instead of extending its end segments.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: classify display edges of a face with a closed-edge hole without a panic

A hole cut by a closed curve is a loop of one edge that starts and ends at
one vertex; mapping the face rebuilt that edge through a check that
panics on it (the guard caught it and dropped every smooth flag of the
body). Such faces are now left out of the ruled-surface test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.trim: keep several regions, trim by projected sketch curves, mutual trim (#767)

keep takes a list of points (the regions they pick); curves: {sketch,
curves?, direction?} sweeps sketch curves onto the surface (along the
surface's normal: not supported yet); with + keep_with trims two
surfaces by each other, extend? meets a short one, stitch? sews the
kept pieces. Trimmed faces carry their lineage, so they are named
after the faces they are pieces of. New fields noted in a pending format file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Trim dialog: sketch curves as the tool, several keep points, mutual trim (#767)

The tool input takes sketch curves too; keep points are places (several
on one face add up); another surface with its keep points makes a mutual
trim with Extend to meet and Stitch toggles. Edit Feature brings it all
back. Labels in every locale catalog.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ROADMAP: M8 trim by projected curves, several regions and mutual trim (#767)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:02 -04:00
bherbruckandClaude Opus 5.5 f3505f0db6 World placement on all cores (#3053) (#3123)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 15:43:22 -04:00
e4d9015f68 sketch: points placed by expressions (#2864)
* Sketch points placed by expressions over the design's parameters

A point typed as an expression ("W", "H / 2") in sketch.point, sketch.line and
the other point arguments is fixed where its expressions come to, and moves
there again before each solve when the parameters change: an outline that
follows its parameters needs no dimensions and no solve per change. The
expressions are saved with the point (one pending design-format change), listed
with the sketch's other expressions, and renamed with their parameters; one
that cannot be worked out is refused.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Sketch point expressions: accurate params doc, out-of-range regression test

The sketch.line params said every point argument takes expressions; only those that
also take a point id do (the rectangle corners, an arc's through point and the like
are plain [x, y]). PointExprs' comment called its expressions mm. A test covers a
parameter that puts a placed point out of range and a design file whose point
expression overflows: both are errors, not crashes, and the sketch recovers.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 13:05:28 -04:00
takuto-NA b76302e850 Assembly: reuse reference meshes during rigid joint motion (#2922) (#2924)
Thanks @takuto-NA.
2026-10-19 09:15:26 -04:00
rlartot aef13b52f4 Pattern and Mirror copies of a primitive change only the seed's targets (#2755) (#2756)
Thanks @rlartot.
2026-10-19 07:44:40 -04:00
NOWN-DEV 768e69c4c7 Joints: a new joint between faces that already meet leaves the part as it is (#2709) (#2710)
Thanks @NOWN-DEV.
2026-10-19 05:54:21 -04:00
NOWN-DEV c66e33284b Joints: offsets, angles and values typed as expressions follow their parameters (#2385) (#2386)
Thanks @NOWN-DEV.
2026-10-18 22:13:13 -04:00
phanoob 6b1fc16d47 Sketch projection: a solid's edges come in as their exact curves (#1508)
Thanks @phanoob.
2026-10-18 21:23:11 -04:00
JIJINBEIandClaude Opus 5.5 7ad5130cd2 refactor: geom::UnitVec3 for unit axes and normals (#2603)
* geom: UnitVec3; a face's analytic axes and normals are unit by type

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: UnitVec3 adds to and subtracts from a Vec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, doc, engine: cylinder axes and measured normals held as UnitVec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, engine: functions that take a unit axis or direction say so by type

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: a face's normal goes to Plane::from_normal as is

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, doc: main's new cylinder helpers take the face's axis as a UnitVec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:31 -04:00
bherbruckandClaude Sonnet 5.5 9eb1540a34 Docs: describe SolidCraft as independent CAD (#2768)
Reword comments, docs and package descriptions so they describe SolidCraft's own behaviour instead of comparing it to another product. The trademark notice, the commercial-CAD rule and the navigation preset name stay as they were.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 21:16:11 -04:00
NOWN-DEVandClaude Opus 5.5 ed64988d8f Joints: a round origin keeps its end when the face it opens onto gets other neighbours (#2760)
A round origin's end is kept by the name of the face across the rim. On
a face in pieces (a sheet split by a groove or a bend) that name lists
the faces round the piece, and when those change (a hole nearby moves
or goes) the name matched neither rim, so the end fell back to the
nearer end of the stored pick: a pick near one end of a thin wall that
the design moved past mid-wall turned a part through 180 degrees. The
end whose rim matches the name better now wins: the face itself, a face
merged into it, then a piece of it, then the same face by its stem.

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-18 21:16:01 -04:00
6d410c342c Joints: origins on an edge of a face, at its middle or a corner (#2403) (#2404)
* Joints: a face or circle origin keeps its turn as the face tilts

A face- or circle-centre joint origin worked out its frame's x from the normal alone
(`Vec3::any_perp`), which switches axis where the normal crosses 0.9 along X: a part on a face
tilted past about 64° by a parameter spun a right angle about the face. New origins keep the x
they have when picked (`x`, component coordinates) and each solve lays it onto the face as it is
now, so the part tilts with the face without spinning. Origins saved without it are placed as
before.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Joints: origins on an edge of a face, at its middle or a corner

`joint.origin` and `joint.create` take `edge: [x,y,z]` (a point on an edge of a planar face),
with `on` (which face; default the larger planar face beside it) and `corner` (the end near that
point). The origin sits at the edge's middle (z out of the face, y into it) or at the corner (x
and y along its two edges into the face, right-handed whichever way the edges run). The edge, the
face and the corner's other edge are kept by name and found again on every solve, so a part set
40 mm in from a panel's corner stays there when the panel changes size; a name that finds nothing
leaves the joint out with the reason.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 18:10:28 -04:00
bherbruckandClaude Opus 5.5 a228a5830e Release 0.16.0
Version 0.16.0; the pending design-format changes are folded into format 27.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 18:10:44 +00:00
Artem Sushchev f5a868efda Fix red main after #2247: record its robustness seeds, and keep older designs' joins of split pieces working (#2540)
#2247 changed 16 robustness seeds (bodies N -> 1, and some seeds then build
different steps; seed 54's new shell fails on #2247's parent too). Recorded
on Linux.

Designs saved before #2247 that combined a split-off piece by name (tools
Posts, Posts (1)) failed on the missing piece and left both posts off the
case. A combine now skips a missing `X (n)` when `X` is a tool too or the
join's target, with a warning. Format note for the meaning change.
2026-10-18 13:10:09 -04:00
NOWN-DEV 8313c3468a Joint origins: resolve by the named face, keep a hole's end and the turn (#2186) (#2187)
Thanks @NOWN-DEV.
2026-10-18 13:08:23 -04:00
Loohi 9c7afb6076 Single hole follows its sketch point (#2110) (#2336)
Thanks @Loohi.
2026-10-18 11:35:15 -04:00
N3MI-DG 3eeb20d2bd Browser: hidden items grey out, and folders keep their own visibility (#2308)
Thanks @N3MI-DG.
2026-10-18 11:34:55 -04:00
Brazz 07708a4e2a Extrude: a taper composes with a start offset (#2312) (#2313)
Thanks @acbrazzl.
2026-10-18 06:18:43 -04:00
Artem Sushchev a4c4b411e5 Combine: a cut keeps a body joined from separate pieces in one body (#2247)
Thanks @H1D.
2026-10-18 06:02:44 -04:00
DuBearte e70bd52409 Extrude: a side drawn in collinear pieces is one face (#1788) (#1949)
Thanks @DuBearte.
2026-10-18 05:43:23 -04:00
selune 6422ef84d5 Drawing: share length display formatting (#2054) (#2086)
Thanks @0xlillith.
2026-10-18 00:29:15 -04:00
83c31d77c4 surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)
* feat(geom): surfaces through curve networks, and spline spaces to build them

Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges

kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry

BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(kernel): G2 boundary surfaces against a body's face

The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(kernel): a boundary patch with straight corners measures its own area

A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)

A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(doc): boundary surfaces through curve networks and loops of three or four

FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(engine): surface.boundary through loops of three or four and curve networks

The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).

Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(ui): Boundary Surface dialog

Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(oracle): a boundary surface through a loop, thickened (#763)

Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* refactor: boundary surfaces, review cleanups

Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-17 21:47:38 -04:00
JIJINBEI 2acc344aa4 Sketch: show open and untied profile ends (#2000) (#2001)
Thanks @jijinbei.
2026-10-17 18:52:12 -04:00
Koschtetnix 487aa64e10 Multi profile extrusion performance (#2064)
Thanks @Koschtetnix.
2026-10-17 18:30:52 -04:00
Pablo López cb857f1fa7 Rib/Web: grow along the sketch normal (#2056) (#2057)
Thanks @pablopeza.
2026-10-17 14:15:03 -04:00
fkirill f480898158 Extrude: join extensions of ribs on curved bases (#2059) (#2082)
Thanks @fkirill.
2026-10-17 13:33:21 -04:00
bherbruck 979614e60f Release 0.15.0 (#2039)
Version 0.15.0; pending design-format changes folded into format 26.
2026-10-17 11:55:05 -04:00
NOWN-DEV 09b3bd0e01 Sheet metal: machine a hole feature's drills in one pass, keep cuts after a text cut (#1979) (#1980)
Thanks @NOWN-DEV.
2026-10-17 08:52:19 -04:00
NOWN-DEV 8a2d142333 fix: a cut takes only its sketch, a join adds only it (#1310)
Thanks @NOWN-DEV.
2026-10-17 08:42:17 -04:00
NOWN-DEV 186555dbe9 Clearance report: overlaps, near pairs and nearest bodies (#1900)
Thanks @NOWN-DEV.
2026-10-17 04:54:39 -04:00
NOWN-DEV 2831426c51 solid.mirror: mirror bodies of placed components where they are shown (#1896)
Thanks @NOWN-DEV.
2026-10-17 04:08:22 -04:00
NOWN-DEV 9ce940b0b1 Evaluation: sketch and rename commands no longer slow down with the number of placed bodies (#1898)
Thanks @NOWN-DEV.
2026-10-17 04:08:18 -04:00
NOWN-DEV 9a4d936b7b fix: text cut into a large part stays on the exact 2D route (#1903)
Thanks @NOWN-DEV.
2026-10-17 04:08:12 -04:00
Irakli Kourtis 98ce6a4ee8 Sweep guide rails and two-rail sweep (#771) (#1806)
Thanks @jyviko.
2026-10-17 04:07:46 -04:00
Mateusz Sych f350c35414 Expressions: a mixed number such as 2 1/8" is 2.125" (#1802) (#1820)
Thanks @SychPL.
2026-10-17 04:07:19 -04:00
NOWN-DEV c7bb64dd74 feat: a slanted or curved edge across a sheet metal bend folds to a smooth curve of few pieces (#1799)
Thanks @NOWN-DEV.
2026-10-16 16:26:15 -04:00
H. Conrad bb13799246 Fix/clippy option zip (#1798)
Thanks @Ian-cmd-ops.
2026-10-16 16:26:11 -04:00
Mateusz Sych 920ea42fe1 Revolve: a partial turn's planar faces come out whole (#726) (#1718)
Thanks @SychPL.
2026-10-16 15:26:10 -04:00
HiroKenEz 19be7d27e7 Tapered join on a face: sew a whole face, keep the run-on inside the body (#1534) (#1763)
Thanks @HiroKenEz.
2026-10-16 13:26:15 -04:00
Mateusz Sych 31b2ddc0cf Split Body: the face a plane split cuts takes an attachment that follows the plane (#565) (#1746)
Thanks @SychPL.
2026-10-16 13:26:11 -04:00
Colin Faulkingham da65b4fc8c Thread: suggest cylinder size and expose metric diameter and pitch (#1759)
Thanks @cfaulkingham.
2026-10-16 12:26:23 -04:00
Mateusz Sych bf4551159e Split Body and Combine Intersect keep their faces' sources, so sketches attach (#565) (#1732)
Thanks @SychPL.
2026-10-16 11:26:17 -04:00