Commit Graph
65 Commits
Author SHA1 Message Date
02c77df5f7 inspect.clearance: mesh each body once per check instead of once per pair (#2867)
* inspect.clearance: pairs whose bodies did not change are not measured again

Each clearance check measured every close pair again, though between two
checks usually only a few bodies change or move. Results are now kept per pair,
keyed by both bodies' geometry and placement and the check's settings; a pair
whose two bodies are unchanged is taken from that cache. With 40 overlapping
parts, a check after moving one of them took 0.8 s instead of 23 s (741 of 780
pairs reused). Pairs that could not be worked out are tried again each time.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: boxes and placed keys exactly as before the reuse

The pair boxes are taken over the mesh's triangles with finite corners, as a
distance shape's are, so pruning is unchanged. A placed body's identity now
includes its model body's own frame, so two placements are never mistaken for
one another.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: a large body is meshed once for all its pairs

Each pair that touches cuts the larger body down to the pair's region with a
kernel boolean, and that boolean meshed the whole body twice: once for its
checks and once inside the intersection. A sheet with 600 faces paid about
2.5 s per pair for meshes that were the same every time.

A body can now keep its meshes for reuse (Body::keeping_meshes); its booleans
take the meshes from there, and the intersection takes its shell meshes
from there too (truck-shapeops: and_with_history_meshed). Clearance uses such
copies for one check. Results are unchanged to the bit. On a 3 x 2 m sheet
with bends and 300 holes, the clip took 0.23 s per pair instead of 2.6 s, and
24 rivets took 5.6 s instead of 16.5 s.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:14:24 -04:00
26f42ae09b Snapshot: draw a see-through appearance see-through, and show a tool body inside its target (#2329) (#2330)
* Snapshot: draw a see-through appearance see-through, and give the CLI --body, --tool and --section

A headless picture dropped a body's opacity: the scene carried only a colour, so a design with
a translucent appearance was drawn opaque by `solidcraft-cli snapshot`, by MCP screenshots and
in a design's thumbnail, although the window has always drawn it as glass. There was then no
way to look at the body a cut would remove inside the material it meets: only a volume to
measure and reason about, which hides exactly the errors a picture makes obvious (a tool that
stops short, or lands in the wrong place).

- `SceneMesh` carries the body's opacity; `view::build_scene` takes it from the design
  (`model_body_opacity`), and a selected body stays solid so the selection colour reads.
- The GPU capture routes a see-through body into the scene's glass at its own alpha, as the
  viewport does; the CPU rasterizer draws the solid bodies first (they own the depth buffer),
  then the see-through ones blended over them, far sides before near sides and without writing
  depth, so what lies inside shows and a line between the two is not hidden.
- `snapshot --body NAME:opacity=0.3,color=#rrggbb`, `--tool NAME` (that body solid in the tool
  colour, the rest see-through) and `--section z=27` run the commands the app itself runs
  (`appearance.assign`, `inspect.section`): the options are shortcuts, not a second renderer.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Tests: measure the tool colour as it is drawn through a see-through target

The tool-colour filter was derived on paper and demanded a red more than twice either other
channel, which the target in front of it tints away (measured: (200, 108, 85) through opacity
0.3); and the colour check painted the tool, which a solid target hides.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* fmt

* Snapshot options: strip the colour's # rather than slicing it; README

Slicing `value[1..]` on an input-derived string is what the house rules ask us not to write,
even where a length check has already made it safe. The error a failed assignment reports now
names the body rather than claiming it came from --body, since --tool reaches it too.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* --tool: assign the bodies around the tool in groups, not one command at a time

Each appearance.assign is an undo step with a document snapshot behind it, so one per body
made --tool cost grow with the size of the design for no reason: the bodies around the tool
all get the same opacity, and the ones that share a colour can be named in one call. A design
whose bodies all wear the default grey now costs two commands whatever its size.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Rasterizer: say where its glass and the GPU's differ

Splitting each see-through body by facing orders its own two layers; it does not sort across
bodies, which the GPU does. Worth stating rather than leaving a reader to find it.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:10:45 -04:00
vandang890615 72601e678a i18n: add Vietnamese (vi) localization support (#2915)
* i18n: add Vietnamese (vi) localization support

Add Vietnamese (vi) message catalog with 1,583 translated keys covering CAD modeling commands, UI dialogs, timeline, analysis tools, and AI agent chat.

Register VIETNAMESE catalog in ui-egui/src/i18n.rs and add unit test verifying translations, labels, and dynamic browser naming.

* chore: attribute Vietnamese locale and sort catalog

* i18n: fix corrupted and half-English strings in Vietnamese catalog

* i18n: polish residual command and UI translations in Vietnamese catalog
2026-10-19 16:09:36 -04:00
A.Hakim Noor 66108a6b99 Add Malay language support and update localization doc (#2188)
Thanks @a-hakim.
2026-10-18 21:34:54 -04:00
Cyryl Sochacki 8025966a35 i18n: add Polish (pl) UI translation (#2032)
Thanks @cyryllo.
2026-10-18 10:24:13 -04:00
fugazister 535a43ab3c Custom colour themes: theme files, Gruvbox built in (#2255) (#2405)
Thanks @fugazister.
2026-10-18 10:01:39 -04:00
48986041ed Add complete Italian UI localization (#1941)
* Add complete Italian UI localization

Translate all 1509 English catalog entries originally, register Italiano, guard complete coverage and exercise Italian labels and UI rendering.

Co-authored-by: Copilot App <223556219+Copilot@users.noreply.github.com>

* i18n: Italian is a partial catalog

it.json lacks 19 messages main has gained since this branch began, so as a
complete catalog it would fail every_complete_catalog_carries_every_english_message.
Like the other community languages, Italian is now partial: its gaps fall
back to English and new labels don't require an Italian string. The docs
line goes back to main's wording, with Italian among the partial catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: Copilot App <223556219+Copilot@users.noreply.github.com>
Co-authored-by: Ben Herbruck <bherbruck@herbrucks.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-17 22:28:04 -04:00
83c31d77c4 surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)
* feat(geom): surfaces through curve networks, and spline spaces to build them

Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges

kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry

BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(kernel): G2 boundary surfaces against a body's face

The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(kernel): a boundary patch with straight corners measures its own area

A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)

A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(doc): boundary surfaces through curve networks and loops of three or four

FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(engine): surface.boundary through loops of three or four and curve networks

The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).

Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(ui): Boundary Surface dialog

Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(oracle): a boundary surface through a loop, thickened (#763)

Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* refactor: boundary surfaces, review cleanups

Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-17 21:47:38 -04:00
Nathan DaneandClaude Sonnet 5.5 8a31738fe5 docs: ribbon redesign proposal (#1439)
* docs: ribbon UX redesign proposal (mockups and notes)

Seven mockup images and a short description of the proposed ribbon shell, with floating and
compact layout options. Pictures only; no app changes. The sketch variant with tab locks is
left out.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* docs: update the UX mockups to the current command set

Adds the Sketch Pattern panel, Perforate, new joints and motion commands, Fair and Match Surface,
and the Render workspace; the workspace switcher now matches the app (Design and Render available,
Animation, Simulation, Manufacture and Drawing later). Command map covers all 389 commands.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* docs: draw the UX mockups with the reviewed icon SVGs and accents

Ribbon, browser, history and navigation icons now come from the icon system in #853, with the
Sketch tab in the Sketch green and constraints in red.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* docs: address review on the UX proposal README

Describe the current toolbar in our own terms, and list only Design and Render as the workspaces in
scope.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-17 11:36:43 -04:00
Steven Huff 7d44359cf6 Web: show the SolidCraft mark being cut from a cube while loading (#1908)
Thanks @shuff57.
2026-10-17 06:22:52 -04:00
bherbruck 29dfa6bd32 Attribution: the Czech catalog (#1952) 2026-10-17 06:19:12 -04:00
allisonChilton 8c58efdecf Fix missing viewport surfaces after a skipped startup frame (#1791)
Thanks @allisonChilton.
2026-10-17 06:10:46 -04:00
selune 09188c4586 Merge pull request #1689 from jawler/add-spanish-translation
Add Spanish (Spain) localization (es-ES)
2026-10-17 10:38:09 +02:00
Nathan Dane 64966bab88 Implement the reviewed UI icon system and durable review workflow (#853)
Thanks @Nathan-Dane.
2026-10-17 04:07:16 -04:00
Jawler fb23bab9af Update ATTRIBUTION.md 2026-10-17 09:49:16 +02:00
Pablo López ff7c899840 Add Galician (gl) UI localization (#1771)
Thanks @pablopeza.
2026-10-16 13:26:18 -04:00
DuBearte 88f76adbc2 Add Brazilian Portuguese translation (#1688) (#1735)
Thanks @DuBearte.
2026-10-16 10:26:31 -04:00
bherbruck 2c020dbcbc Revert #1682 (three-axis milling) (#1715)
Thanks @bherbruck.
2026-10-16 09:02:19 -04:00
CypherNaugh_0x 737c9358d0 Add three-axis milling with independent CAM and Fusion validation (#1682)
Thanks @CypherNaught-0x.
2026-10-16 08:26:28 -04:00
midasdf bbd4f29ebb Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)
Thanks @midasdf.
2026-10-16 06:26:27 -04:00
midasdf 07da7f8065 Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)
Thanks @midasdf.
2026-10-16 03:26:20 -04:00
JIJINBEI 3333f8a62b Divide intersection edges from their neighbours' parameters (#1038) (#1412)
Thanks @jijinbei.
2026-10-16 00:27:55 -04:00
DuBearte 3fe929e91c Renderer: skip a frame the GPU won't stage instead of crashing (#1469) (#1579)
Thanks @DuBearte.
2026-10-16 00:27:33 -04:00
Irakli Kourtis 1a0b33fcf3 Headless pictures draw on the GPU, with the viewport's pipelines (CPU rasterizer as last tier) (#1555)
Thanks @jyviko.
2026-10-15 22:19:26 -04:00
Jackson OurslandandClaude Opus 5.5 78242d67d1 Import FreeCAD and Rhino files through cadmpeg (#1435)
FreeCAD .FCStd and Rhino .3dm files open, insert and drop like STEP and IGES:
cadmpeg (Apache-2.0, pinned =0.6.1, native builds only) detects the format,
decodes it under its service resource caps, validates the model and writes it
as STEP AP214, which becomes an Import feature in a new component named after
the file, with the up and names options.

Only the fcstd, rhino and step codecs are compiled in (no default features).
ACIS is left out: cadmpeg's sat codec is a ShapeManager stream decoder.
native_cad.rs is the single importer seam. Self-made FreeCAD and Rhino box
fixtures, hostile-input, ZIP-bomb and cap tests, engine tests for the
component path; the browser build reports these formats as not supported.
A note under design format 23 says an Import's file can name these formats.

Co-authored-by: Jacob Oursland <jacob.oursland@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 19:30:03 -04:00
1c9d6617ad Add Turkish translation (#1520)
Registers a Turkish (tr) catalog with its attribution, docs and a test.

Co-authored-by: macrulz54 <macrulz54@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-15 18:47:46 -04:00
bherbruckandClaude Opus 5.5 a13124acdd Import glTF 2.0 files (.glb, .gltf) as mesh bodies (#1512)
glTF files open, insert and drop like 3MF/STL/OBJ: a component named after the file, the node tree as nested rigid components, repeated meshes as occurrences, metres to mm, Y up turned to Z up by default (up: z keeps axes), materials as PBR appearances. Bounded, hostile-input tested reader; no new persisted data. Closes #1505.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 17:27:29 -04:00
Igor Bronovskyi 861ab027b6 Add Ukrainian localization (uk) (#1196)
Ukrainian UI catalog; untranslated keys fall back to English.
2026-10-14 20:10:45 -04:00
selune a261aaa841 Render: integrated workspace, preview image jobs and opaque PBR (#1046)
Lands the Render workspace (R3), bounded preview-image jobs with cancellation and atomic PNG export (R4a), and opaque PBR looks as one change.

- Render workspace: an overlay-free product preview on the installed GPU device. Returning to Design restores its camera. render.scene and render.settings.apply are added.
- Image jobs: render.preflight/start/status/cancel/export run bounded CPU preview jobs. Export captures the job, overwrite choice and document, and checks the caller's file scope before writing.
- Opaque PBR: looks can carry metal fraction, roughness and dielectric IOR. The product viewport and preview PNG use them; geometry and mass are unchanged. The v1 catalog export refuses PBR rather than dropping it.
- Render setups and PBR looks are saved under design format 21. Labels are in en/de/ja/ko/zh/ru.

Supersedes #706 and #800. Refs #620, #673, #756, #1004.

Contributed by @0xlillith.

Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
2026-10-14 19:24:36 -04:00
rlartot e4ef6cfe29 French (fr) UI localization (#1224)
Adds a French catalog as a partial locale (missing strings fall back to English, like Russian), registered in the language list, with tests and attribution.
2026-10-14 19:05:17 -04:00
Lasse Lian 8f081679bc Equal cylinders crossing each other no longer refuse a cut (#788) (#1179)
Equal cylinders crossing each other no longer refuse a cut (#788).
2026-10-14 17:56:02 -04:00
Alex Pro 8ea1fd643f feat: add Russian (ru) UI localization (#1043)
Adds a Russian (ru) UI locale. It's partial: anything not yet translated falls back to English.
2026-10-14 12:11:25 -04:00
Igor Churmeev 14d928b2c8 fix(macos): open files double-clicked in Finder (#1031)
macOS hands files opened from Finder, the Dock or open -a to the application delegate's application:openURLs:, which winit's delegate lacks, so AppKit showed "SolidCraft cannot open files in the SolidCraft design format". open_documents adds that method to the delegate's class before launch finishes and queues the paths for the UI, which opens them like files named on the command line.

This is the one place SolidCraft's own code uses unsafe: the app crate denies unsafe_code instead of forbidding it, and only the two macOS-only functions in open_documents.rs allow it, with the reason documented there and in AGENTS.md. Adapted from VectorCraft (see ATTRIBUTION.md).

Closes #997.
2026-10-14 09:19:08 -04:00
Nathan Dane 9f76cca8b4 Collect application resources for #433 (#833) 2026-10-14 00:49:32 -04:00
selune 3f1c023563 Keep fine meshes whole at collapsed taper boundaries (#906)
The exact surface search could return an arbitrary parameter at a collapsed NURBS boundary, which corrupted the trimmed triangulation domain and lost volume on fine meshes of a fillet tapering to zero. Search results in the boundary projection are now validated, preferring a bounded parameter at a pole and snapping to a finite endpoint only when its transverse tangent has collapsed and the residual improves. Adds four regressions for decreasing chord tolerances, pole parameters, unbounded planar support and provisional preview.

Fixes #796.
2026-10-13 20:45:02 -04:00
selune e99b3bd4e8 render: bounded cooperative HDR input foundation (#837)
A cancellable, bounded Radiance HDR decoder for render lighting input; reference images still accept PNG and JPEG only.
2026-10-13 16:33:51 -04:00
bherbruckandClaude Opus 5.5 738d532ce6 README: add the SELENE rover by @0xlillith as a showcase (#690)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 08:55:12 -04:00
bherbruckandClaude Opus 5.5 302dd7e343 README demo for 0.8: the Raspberry Pi 4 case again, with a rounded rim, engraved text and PETG (#671)
The `pi` story of examples/demo/enclosure_ui_mcp.py keeps the 0.6 flow and adds the rim
rounded in one pick (a tangent chain), "Pi 4" engraved in the floor in DejaVu Sans Bold, and a
PETG material defined in the design, with its mass in Properties, before the height change.
The 0.6 story stays as `pi-0.6` (it built demo/pi-case). The center rectangle now comes from
the Rectangle drop-down. The finished case is in the action matrix corpus as
demo/pi-case-0.8.

docs/screenshots/demo-0.8.gif (9.3 MB) and demo-0.8.mp4 (9.9 MB) replace the 0.6 files: 41 s
at 9x playback.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 08:23:27 -04:00
selune 913583bfee Show a bounded native-cache preview before authoritative reconstruction (#463)
Refs #303. file.save / file.save_as can store a warm native geometry cache (cache: true, off by default) keyed to the document hash, app version and adapter revision. Opening shows a bounded preview from it until the rebuilt session replaces it. Any cache failure counts as a miss.
2026-10-13 02:54:01 -04:00
bherbruckandClaude Opus 5.5 1fd4a2f782 README demo for 0.6: a Raspberry Pi 4 case (#504)
Replace the 0.2.1 enclosure recording with a 40 s take of the current desktop UI building a Raspberry Pi 4 case: a sketch dimensioned with the board's parameters, extrude, fillets and shell, an M2.5 standoff patterned on the 58 x 49 mm hole rectangle, port cut-outs, floor vents, a colour, then height 24 -> 32 mm in Parameters. The demo script gains the pi story (now the default).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 22:56:53 -04:00
bherbruckandClaude Opus 5.5 9062c739d8 docs: link preview cards for the docs site and web app (#457)
* docs: add OpenGraph and Twitter card tags to the book and web app

Links to the docs site and the browser app now unfurl with a preview card.
The book gets the tags through theme/head.hbs (og:title follows the page
title); the web app's index.html carries its own, pointing at /app/. Both
use the social preview image, now served from the book at /solidcraft/og.png.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa

* docs: list the social preview image in ATTRIBUTION.md

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 20:45:21 -04:00
Nathan Dane b447adafaa Finalize macOS icon appearances and Composer sizing (#426) 2026-10-12 18:45:14 -04:00
bherbruckandClaude Opus 5.5 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
Nathan Dane 55f2f29fff feat(macos): integrate approved layered app icon (#399) 2026-10-12 16:39:45 -04:00
Iraklis KourtisandClaude Opus 5.5 cc4955a8da feat(shapeops): face and edge history from booleans
and_with_history / or_with_history return, with the solid, the operand face
each result face is a region of (and whether it is that face untouched) and,
for each result edge, the operand edge it is (a piece of) or the pair of
operand faces whose intersection made it. Faces and edges are recorded where
they are created (face division, intersection edges, split edges, edges
rebuilt on a moved vertex), resolved to operand terms at creation, so the
passes folding in extra shells compose without bookkeeping. and / or wrap
the same pass and drop the history; a missing record never fails them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
2026-10-12 11:52:53 -04:00
e12758ff91 Public reference tests: analytic and FreeCAD expected values (#310)
The oracle no longer uses Fusion measurements. tests/oracle/<case>/ now holds the 76 recipes
(our own format, with recorded measurements and tool-specific fields removed) and an
expected.json per case:

- 55 analytic cases: closed-form values from tools/oracle-analytic/ (stdlib Python, formulas
  in each case's "method").
- 21 FreeCAD cases: the same recipe built with FreeCAD's public scripting API by
  tools/freecad-oracle/ (an external program, not a dependency), with a reference.stl for 20.

solvecraft-cli oracle compares body count, volume, area, centre of mass, bbox, face counts
where the geometry fixes them, and, against reference.stl, the sampled Hausdorff distance and
the principal moments (spatial.rs from #301). cargo xtask oracle reads tests/oracle, writes
docs/oracle.md with the source of each value, and supports known_failure marks for tracked
bugs. CI runs it on every PR; a manual workflow regenerates the FreeCAD values. step-corpus,
seam normalisation and the through-all emulation, which only existed to compare with Fusion,
are removed.

75/76 pass; 75-sm-bracket-holes is a known failure (#296).


Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

Co-authored-by: bherbruck <bherbruck@herbrucks.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 10:43:43 -04:00
Phaiz Mithriln 4fbf19f2f9 feat(web): self-host Japanese font and load on-demand without external CDN
- Bundle BIZ UDPGothic Regular (SIL OFL 1.1) exclusively in solvecraft-web dist

- Remove external jsDelivr CDN fallback; fetch font solely from same-origin ./fonts/

- Fetch Japanese font on-demand only when UI language is set to Japanese

- Gracefully fall back to English UI on fetch failure to prevent tofu glyphs

- Update ATTRIBUTION.md, NOTICE, and THIRD-PARTY-LICENSES.txt
2026-10-12 10:06:50 -04:00
lillith ed102b5393 fix: reject degenerate boolean intersection polylines 2026-10-12 08:36:40 -04:00
bherbruck 6dd202d277 Fix desktop launch, app icons and keyboard parameter editing 2026-10-11 19:09:47 -04:00
bherbruck 6f872c7789 docs: restore the original enclosure demo in the updated UI 2026-10-11 15:05:16 -04:00