Commit Graph
9 Commits
Author SHA1 Message Date
RyanandClaude Opus 5.5 5e0e168ae9 Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095) (#8103)
* claim: #8095

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095)

component.properties and occurrence.properties report each closed body's
inertia tensor about its centre of mass, and in total the tensor about the
total centre of mass (world axes, g·mm²), its principal moments and axes,
the first moments, and with `about: [x, y, z]` the tensor about any point.
The tensor comes from each body's welded export mesh, tessellated once per
body, scaled to the measured mass and turned by each placement; bodies add
by parallel axes. The maths is a new crates/geom inertia module.

The Properties window shows the first moments, the tensor, the principal
moments and axes, and the view marks the centre of mass with the principal
axes while it is open. Inspect → Measure → Properties now opens that window
(it ran the command and showed nothing).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: Copy matrix, and the whole design's card titled just Properties (#8095)

Copy matrix, under the tensor, puts it on the clipboard as three lines of
tab-separated values at full precision, in the units shown. The card for
the whole design is titled Properties; one opened on a component,
placement or bodies keeps its name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: measure beside the window, so a large assembly doesn't freeze it (#8095)

Properties ran on the window thread: 18 s on a 144-body design, with the
window answering nothing meanwhile (#5203). In the desktop app the card now
measures on a copy of the session on a worker, the way #4614 made agents'
measures work, says "Measuring…" until the reply is in, and Close drops it.
A quick measure still shows at once; headless, tests and the web measure in
place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 13:47:44 +00:00
Karl Von Richter 0dffb206b1 Assembly: ground the first part; drag free joint chains (#2804) (#2805)
* assembly(feat): ground first parts and drag free joint chains

Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* assembly(fix): update movable fixtures for first-part grounding

Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* assembly(test): keep the motion-cost crank free

Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* assembly(test): free the frame placement fixture

Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main.

Signed-off-by: Karl Von Richter<karl@embeint.com>

---------

Signed-off-by: Karl Von Richter<karl@embeint.com>
2026-10-23 23:15:34 +00:00
CamWightandClaude Opus 5.5 9559ad398a Physical material: one rule for a body's material and its density (#4783) (#4785)
* claim: #4783

* Physical material: one rule for a body's material and its density (#4783)

inspect.measure, component.properties, occurrence.properties and the
Properties window took a body's material name from the raw assignment,
but its density from Document::density, which falls back to the default
material when the assigned one is unknown or has an unusable density. So
a damaged or hand-edited design read one material and weighed another: a
design material "Broken" at -3 g/cm³ read "Broken" at 1.29 g/cm³.

One rule, in one place:
- DEFAULT_MATERIAL (new, beside DEFAULT_DENSITY in the material library)
  is the default material's name. The library's first row uses it.
- Document::body_material (new, beside Document::density) is the material
  a body's mass is computed with, as the library or the design spells it:
  the assigned one when it is known and has a usable density, else
  DEFAULT_MATERIAL. Document::density is that material's density, with
  the same value as before for every input.

inspect.measure and the physical properties name body_material.
inspect.measure now names every body's material, measured or not, since
naming it takes no measuring; the density stays with the mass, on the
bodies measured. So the Properties window shows the engine's name without
a fallback of its own. The places that keep the assignment as stored
(configuration cells, material.assign, material.edit, material.delete
and the dialogs) only use the constant, so a configuration still keeps a
damaged assignment as it is.

The visible change: a body whose material is unknown, or has an unusable
density, reads "Default", the material it weighs, and a miscased name
reads as the library or the design spells it. A body inspect.measure
can't measure now has its material too. Masses and densities don't
change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 13:44:27 +00:00
Irakli Kourtis 753b0a2eab Unstitch and Reverse Normal (#856)
Unstitch takes a body's faces out as surface bodies; Reverse Normal turns a surface body's faces over. Both are saved in format 18. Closes #766.
2026-10-13 16:45:31 -04:00
bherbruckandClaude Opus 5.5 0b1e61504d File format 17 for qualified piece names and sheet metal rim names (#700)
0.8.0 shipped format 16. Lineage names of a piece qualified by the faces around it, and sheet face names of a rim (rim.<edge>) or a bend end (rim.bend0/1), now come under format 17. Format 16 designs need no transformation, and the version stamp makes 0.8.0 ask for an update.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 09:34:20 -04:00
Jonas Wrede 14635e5d3a feat: user-defined physical materials stored in the design (#532) (#606)
A design can define its own physical materials (material.create, material.edit, material.delete): name, density and an optional look. They work everywhere built-in materials do: assignment, mass properties, colours and configuration cells. Stored in user_materials, an additive field under format 16. Un-ignores the #554 regression test. Fixes #532.

Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
2026-10-13 04:47:23 -04:00
Jonas Wrede b11841b0bc test: failing regression test for #532 (ignored until fixed): Physical materials: no user-defined materials (library is fixed to 14 entries) (#554)
Adds an ignored regression test for #532; it runs once #532 is fixed.
2026-10-13 02:28:01 -04:00
bherbruckandClaude Opus 5.5 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
bherbruck d71bdb78ec feat: strengthen modeling, configuration, and assembly workflows
Preserve linked sketch identities through deterministic face projection and resizing. Fix origin-corner picking, persistent inline navigation, appearance editing, configuration styles, component properties, contact sweeps, sheet exports, analytic STEP offsets, and bounded rolling-ball fit accuracy.

Validated with full cargo xtask ci, native workflow screenshots, repeated enclosure replays, and analytic geometry regressions.
2026-10-11 00:37:26 -04:00