4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- af4e97b64 jyviko: cli: the rig and the oracle reach MeshTolerance through the engine
- f7daf6124 jyviko: doc, engine: the unused revolve targets and the formatting of the exact tools
- caa5ed0e6 jyviko: kernel: twisted and scaled sweeps round corners by the plain sweep's corner model
- dead22ba7 jyviko: kernel: corner rules for direction, rails and closed paths; no feature gate on SMLib sweeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 849bb1f24 jyviko: kernel: face sections along a direction as SMLib's exact curves
- 876333480 jyviko: doc: an iso link along a direction on a solid is SMLib's exact section
- d9274aaf1 jyviko: kernel: the point-path sweep test expects the polyline's walls
- 13e9aca7e jyviko: kernel: exact projection, section and iso curves exported; SMLib at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7952516eb jyviko: doc: sweeps along linked and planar curves follow the exact curves
- 43e8b0349 jyviko: kernel: a point path's polyline is swept as the lines it is, however smooth
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 69a7a85cb jyviko: kernel: SMLib sweeps round corners and along free-form paths, lofts with holes or to a point, drafts on a foot
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 520d934fe jyviko: kernel: SMLib sweeps that twist, scale or follow rails, railed lofts, and paths of points
- f870ecb87 jyviko: solidcraft-smlib: pin the fork at ffaf4e8, offset merge and intersection-edge ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* kernel: loft guide rails (#201)
A loft follows one or two guide rails between its sections: stations are added between each two
sections, each the plain loft there moved so that the point a rail guides lands where the rail
crosses the station's plane — turned about the loft's direction and scaled (or stretched across
to the rail) with one rail, carried, turned and sized between two. The sections and caps stay
exact; the smooth loft runs through sections and stations. Solid and sheet lofts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* doc, engine: solid.loft and surface.loft take guide rails (#201)
`rails` (one or two {sketch, curves}) and `rail_fit` (scale | stretch), stored on Loft and
SurfaceLoft (one pending format note), parsed by the sweep's rail parser (now shared) and built
through the kernel's railed loft. Rails on a loft to a point, or on a surface loft with edge
sections or end continuity, are refused as not supported yet. The rails' sketches are walked as
the feature's references and their components placed like a sweep's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* ui: Rail, Second Rail and Rail Fit in the Loft and Surface Loft dialogs (#201)
The rail inputs and fit row the sweep dialogs have, shared through dialogs_sweep; Edit Feature
brings the rails back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* docs(roadmap): loft guide rails (#201)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* loft rails: review clean-ups (#201)
- Sweep and loft rails share one turn-and-size map (`sweep_path::rail_frame`).
- A station's middle and the loft's direction come from one curve through the sections'
middles (exact derivative) instead of two more plain-loft evaluations per station; at most
33 wires, so railed faces stay light.
- Nearest points on a section use `param_on` (kept only where the search comes nearer); the
size uses `Aabb3`; one B-spline builder; anchors keep their nudge.
- The railed and plain lofts share one path in `loft_with_rails` and `loft_sheet_with_rails`.
- The engine leaves the not-yet-supported refusals to the design's evaluation; both lofts start
their rails from the first section's first point.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* loft rails: refuse rails on sections with holes, with a test (#201)
Main's lofts now take sections with holes (#2447); rails shape only the
outlines, so a railed loft of rings is refused until the rails carry the
holes too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Part of #771 and #772. solid.sweep and surface.sweep take orientation (perpendicular, parallel or a direction), twist (up to 4 turns) and end scale (0.01 to 100), applied about the profile's normal through the path's start; default options run the old sweep, so existing sweeps are unchanged. New fields are optional, left out when unset and noted under format 21; twist and scale are model parameters. Both sweep dialogs get Orientation, Twist and End Scale rows; labels in every catalog. Checked on main + this branch: cargo check --workspace, kernel/engine/UI sweep tests, the doc suite and the robustness goldens.
Each wall of a surface built from sketch curves (Surface Extrude, Revolve, Sweep and Loft) is now named after the curve it comes from, exactly rather than from geometry, so references to those faces survive edits.
Surface Sweep carries open curves and closed profile boundaries along a sketch path into surface bodies, with smooth walls along curved point paths. Adds the SurfaceSweep feature (format 18 note), the surface.sweep command, a dialog with Edit Feature support, and kernel and engine tests.
Part of #757.
One numbered loop type (crate::numbered) carries each segment's profile
numbers through orientation, snapping, circle re-seaming, re-sampling and
rotation; every builder orients its regions through it once. Builders that
make their own side faces pair each face with its provenance as it is made
(ruled walls by the wire edges each face holds, smooth lofts, coils and path
sweeps by segment), and cap_and_close appends the caps itself. Column
following is kept only for faces truck sweeps internally (rsweep, tsweep
along paths, cones, where an apex vertex stays put). Extrude derives face
sources and history in one topology pass. One attach entry point takes
operands with their edges already indexed.
Geometry, face order, face sources and recorded origins are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
Extrude, revolve (partial and full turn), tapered extrude, loft (incl. to a
point), sweep, path sweep, coil, primitives, lip, emboss and thicken attach
the exact history of the bodies they build: each face's profile segment, cap
or operand face, and each edge's operand edge, recorded by topology identity
inside the building call. Nothing is sampled; a body whose faces do not follow
the expected construction carries no history. Face sources are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8