Commit Graph
1074 Commits
Author SHA1 Message Date
jyviko c533128ebe Merge remote-tracking branch 'upstream/main' into merge-main-develop
# Conflicts:
#	crates/doc/src/eval.rs
#	crates/doc/src/name_lookup.rs
#	crates/doc/src/sheet.rs
2026-11-02 16:28:15 -05:00
jyviko 98a6f591eb Merge remote-tracking branch 'upstream/main' into merge-main-develop
# Conflicts:
#	crates/doc/src/eval_more.rs
#	crates/doc/src/placement_reuse.rs
#	crates/engine/src/cmd/contact_sweep.rs
#	crates/engine/src/cmd/diagnostics.rs
#	crates/engine/src/cmd/inspect.rs
#	crates/engine/src/cmd/sheet_tests.rs
#	crates/engine/src/cmd/sketch_inspect.rs
#	crates/engine/src/cmd/view_navigation.rs
#	crates/engine/src/schema/diagnostics.rs
#	crates/engine/src/schema/diagnostics_tests.rs
#	crates/engine/src/schema/mod.rs
#	crates/ui-egui/src/sketch_line_arc.rs
2026-11-02 15:54:06 -05:00
jyviko 3cbcf0315a Merge remote-tracking branch 'upstream/develop' into merge-main-develop
# Conflicts:
#	tests/kernel-cases/fillets/KNOWN_FAILING
2026-11-02 15:45:18 -05:00
jyvikoandClaude Opus 5.5 653c16e6f5 Native B-rep: a ball patch is its own surface kind, read from and written to SMLib's flat kind 6
SMLib's flat arrays now carry the corner of three equal rounds as `SURFACE_BALL_PATCH` (kind 6): its net as a NURBS face's block, with its sphere's centre and radius as its definition (ids 36 and 166). The record reads it as `ball_patch {center, radius}`, a label like the analytic kinds, with the net as its `nurbs`. A plain sphere with a form won't do: the net is not a piece of SMLib's sphere NURBS, so SMLib's `IsNurbSurfaceSphere` would refuse it.

Written back, a ball patch is kind 6 with the same definition, which SMLib takes once its net is certified on that sphere. Elsewhere:
- Offsets classify it as its sphere, so its offsets stay exact and collapse at the centre.
- Face kinds count it as a sphere: fillet_three_edges_at_a_corner's corner is now `sphere`, no longer `other`.
- STEP, which has no ball-patch entity, gets the net as the face's B-spline surface, pcurves included.
- Iso curves and SSI of the label are refused; the face's form is what evaluates.

Test: a_rounded_cubes_ball_patches_go_round_with_their_spheres. The cube's eight corners are ball patches about the corners pulled in by r. Points of each patch lie on its sphere to 1e-12. The patches are kind 6 again after import, with the same definitions bit for bit, and the closed-form volume holds.

Format: pending/ball-patch-faces.rs. Docs: docs/native-brep.md and the rig README's `surface_types` (`ball_patch`).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 15:44:41 -05:00
dudedagger42andClaude Opus 5.5 6be5be7f0c Keys: option to keep model keys out of sketches (#7675)
* Keys: a sketch and the model kept apart on Scope

`command_for` fell back to the first enabled command bound to a key, so a model key pressed in
a sketch (F, Fillet) still ran the model command. A key now runs only a command of the scope
the view is in, or one that works everywhere; otherwise nothing fires. Inspecting, views and
file commands (`inspect.*`, `view.*`, `file.*`) count as everywhere, so Measure's I still works
in a sketch. #4432's `sketch_and_model_keys_are_kept_apart` is ported to `Scope`.

Not ready: main's `the_extrude_key_in_a_sketch_finishes_the_sketch` (#2815) expects E in a
sketch to finish it and open Extrude, which this rule stops.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Keys: keep model keys out of sketches as an opt-in preference

The strict sketch/model split is now Preferences > Shortcuts > Keep model
keys out of sketches, off by default. Off, a key resolves exactly as on
main (a feature key such as E still finishes the sketch). On, a sketch
runs only sketch keys and keys that work everywhere (inspect, view, file).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* rustfmt

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 19:24:51 +00:00
austin62jakeandClaude Opus 5.5 ce6ad21106 macOS update: say to quit SolidCraft before replacing it (#7584) (#7886)
* claim: #7584

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* macOS update: say to quit SolidCraft before replacing it (#7584)

After Download and open, the update window told people to drag SolidCraft
to Applications, replacing the old copy, then restart it. Finder refuses to
replace an app that is running ("the item “SolidCraft” is in use"), so the
message now says to quit SolidCraft first, then drag the new copy over and
open it again. "Quit" rather than "close": closing the window on macOS can
leave the app running.

The id update.dmg_opened is unchanged; every catalog that carries it is
updated, and the user guide's update tables get the same step.

Fixes #7584.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 18:50:09 +00:00
github-actions[bot] 857b13b64f Regenerate generated files and fold pending files [skip ci] 2026-11-02 19:07:59 +00:00
Mateusz SychandMateuszSychXpl dadefec702 Joint dialog: Find Limits fills the limits from where parts collide (#5968) (#7047)
* claim: #5968

* Joint dialog: Find Limits fills the limits from where parts collide (#5968)

joint.find_limits sweeps each value of a joint both ways from where it is,
on a copy and with its own limits left out, and answers where the parts it
moves first touch another part, where a closed loop stops closing, or that
nothing is met within a turn (angles) or the parts' reach (distances).
Edit Joint's Limits section gets a Find Limits button that runs it on the
joint as the dialog has it, off the window thread, and fills the rows.

joint.sweep now tells touching bodies apart from the other bodies of the
same two parts: on the Hinge Assembly sample the pins touch where it starts,
and the plates used to pass through each other unnoticed.

* find_limits: read the session only

* find_limits: a joint with nothing to meet, edits during a search, tiny ranges

* find_limits: keep touching at the start per pair of parts

Per body, the Hinge Assembly sample's plates, which only come flush in
the end plane the two leaves share, stopped the search. The leaves never
pass into each other: the sample's answer is a whole turn.

* find_limits: touching boxes cost no collision work; stale results and rounding

* find_limits: each pair of bodies of resting parts held to its own depth; loops without bodies

* find_limits: a 32-bit budget it can pass, a repaint with the result, a bad form says so first

* find_limits: each pair of resting bodies gets its own margin

* find_limits: Arabic, Hebrew and Vietnamese strings (complete catalogs on main)

* find_limits: search the joint with Edit Joint's side picks

Edit Joint now keeps the joint's sides as picks in its inputs, and its OK
commands compare them with what it opened on. Built without them, the
commands Find Limits applies first asked for the sides again, so every
search failed.

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-11-02 18:28:28 +00:00
89f1234f28 Browser: placements start closed (#9274) (#9658)
* claim: #9274

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: placements start closed (#9274)

A large assembly opened with every placement unfolded, so the browser was a
long list to scroll through. Placements now start closed; opening one shows
its own placements still closed, and closing and reopening it leaves them as
they were. Find in Browser, a pick in the view, Expand All and Collapse All
open and close them as before.

Preferences > Interface > Components start open (browser_components_open)
keeps every placement open from the start, as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: scenarios and the icon audit open placements, which now start closed

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: tests that read rows inside placements set the open-placements preference

Three tests added on main since this branch started (joint folders, Features
folder marks, group rename) look at rows inside placements, which now start
closed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-02 16:39:25 +00:00
bherbruckandClaude Opus 5.5 c7547eb3a8 Extrude: a face picked off the profile's plane is the target by default (#11201)
With a profile or face picked, clicking a face, vertex or parallel plane that is
not in the profile's plane now sets Extrude to To Object, not one more profile.
Clicking into the Profiles box first makes the next picks profiles again.
Preference extrude_auto_to_object (Tools) turns it off.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 16:00:40 +00:00
jyvikoandClaude Opus 5.5 a840c9cd31 Merge main (01b592e0c): its 20 commits since brett's sync 5
Conflicts:
- doc/eval.rs: ours. Main's #6452 adds a `copy` flag so a pattern's or mirror's copy skips the join-end trimming. This branch has no join-end trimming, so the flag has nothing to switch, and its parameter is removed rather than kept unused. #10698's exact cone and torus normals merged cleanly.
- doc/sheet.rs, engine/cmd/sheet_tests.rs, gpu/tests.rs: both sides added beside each other; both kept.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 10:14:29 -05:00
abea79d8ab Preferences redesign 4/11: General profiles, files and updates (#9876) (#10295)
* Redesign General preferences

* Update Preferences regression fixtures and gallery coverage

* Keep measured Preferences faces out of neutral exclusions

* Keep the profile name entry in Preferences search results

The redesigned Profiles section had no search-visible control, so a query
such as "profiles" dropped the whole section and the name field could not
be reached with a search active. Report the entry row as a hit so the
section stays on the results page, and point the typing-focus regression
test at the redesigned "Profile name" field and "Save as new" button. It
still checks that typed profile names stay out of the search box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 13:58:23 +00:00
Colin Faulkingham c4808e4715 MCP: clean up empty scratch folders on shutdown (#7836) (#7929)
* claim: #7836

* fix(mcp): remove empty scratch directories on command exit
2026-11-02 13:57:48 +00:00
brett19andClaude Opus 5.5 083b525adf Merge origin/main into smlib
Conflicts kept both sides:
- eval.rs: main's thread-search change (#10227) moved into develop's eval_thread.rs; construction axis/point source bodies with the branch's fallible construction_state; main's identity shortcut in the branch's fallible placed().
- eval_more.rs: main's box helpers and beyond_cylinder_reach kept (main's cut and tap-marking code uses them), body_box meshing through Body::mesh.
- project3d/project.rs: SMLib meeting_edges kept; a face pick now takes its whole surface patch (#9009) through meeting_edges over a set of faces.
- frames.rs: main's split_move (#9660) with the branch's fallible to_local.
- ao.rs: main's draw_opaque with the branch's open-body triangles.
- dialogs.rs, move_preview.rs, viewport.rs: both sides.
- Generated files from main. Tests calling world_state() unwrap its Result.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
2026-11-02 01:33:06 -07:00
bherbruckandClaude Opus 5.5 9fdf153054 Agent chat: only the chat's own tools skip the panel's question (#10955)
A permission question counted as one of SolidCraft's own tools when its title merely contained
"solidcraft". Now the whole title must be a tool of the chat's own MCP server, named as
`mcp__solidcraft-app__<tool>`, and its kind must be `other` or not given. Anything else goes through
the user's mode and remembered answers, or is asked in the panel.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 05:15:42 +00:00
bherbruckandClaude Opus 5.5 21fc384e40 Control channel: a new connection has five seconds to show its token (#10961)
A client could connect and send nothing, or only blank lines, and hold one of the 16 connection
seats for as long as it liked. All reads before the token now share one five-second deadline; the
connection is then closed without a reply. An authenticated connection may idle as before.

`solidcraft-cli mcp --connect` used to open a connection at start and hold it until the first tool
call. It now only checks that the app is there, and the first call connects.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 04:23:23 +00:00
bherbruckandClaude Opus 5.5 5d6a80ff35 Control token file: no file in a custom folder when icacls times out (#10958)
On Windows the token file is restricted with `icacls`, which may not finish in time (#6145). That
counted as success everywhere, and is safe in the default folder, the user's own local app data.
A folder picked with SOLIDCRAFT_CONTROL_DIR may be readable by others, so there a timeout now
removes the still empty file and returns an error. The default folder behaves as before. The
decision is a small function of its own, tested without running icacls.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 04:08:13 +00:00
MarkusReandClaude Opus 5.5 6e67ae34b0 Agent chat: keep transcript shortcuts out of CAD (#10576)
Selectable transcript labels do not request TextEdit focus, so the global
clipboard handler also copied, cut and pasted selected CAD geometry while
the user worked with chat text.

Keep keyboard ownership with the visible chat after a pointer press until
the next press outside it. Release it when the panel is hidden, and do not
use selections from other native viewports as a global CAD shortcut guard.

Cover real label selection, clipboard events, fallback key events, quick
select-all, hidden panels and deliberate return to the CAD viewport.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 03:24:30 +00:00
Colin Faulkingham ad23882080 Assistant: recover when an agent ignores Stop (#10800) (#10916)
* claim: #10800

* fix: recover when ACP agents ignore Stop
2026-11-02 02:09:27 +00:00
brett19andClaude Opus 5.5 7f2af7f729 Merge origin/main into smlib
Conflicts, both sides kept:
- Cargo.lock, crates/engine/Cargo.toml: smlib's solidcraft-profile/solidcraft-step beside
  main's solidcraft-testkit and the image comment.
- crates/doc/src/{eval,eval_more,name_lookup,project}.rs: smlib's "a stored name finds its
  face or edge or asks to reselect" logic kept; main's long-name quoting (#8673) applied to
  its messages. Main's split-name hole re-lookup (#10699) dropped: names here never report
  split.
- crates/doc/src/lib.rs: both exports, with main's revolve_extent_for_handle.
- crates/engine/src/cmd/silhouette.rs: main's outline()/Silhouette split, on the fallible
  world_state().
- crates/engine/src/cmd/sketch_project_tests.rs: both tests.
- crates/ui-egui/src/{canvas,hole_refs}.rs: main's anchor_item/model_text on
  open_meshing::session_world.
- crates/ui-egui/src/preview.rs: main's cut_tint switch around smlib's kept-surface ghost
  filter; both helpers and both tests.

Seam fixes: FeatureKind::Repair in main's kind_key/type_name_to_kind_key (#10748); main's
new world_state() callers in ui-egui use session_world or unwrap in tests; a sketch test's
Spline gets nurbs: None.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
2026-11-01 18:44:29 -07:00
CamWightandClaude Opus 5.5 325917f2ae Ambient occlusion: no artifacts on the preview or on hollow bodies (#9327) (#9335)
* Ambient occlusion: the radius follows what the frame draws (#9327)

In an empty design the radius came from the model's box, which is empty, so a
preview got the smallest radius and the depth map's precision showed as specks.
It now comes from the box the depth range uses, and with nothing to draw there
is no occlusion.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Ambient occlusion: the term drawn once and blurred by depth (#9327)

The lit pass worked the term out for every fragment it shaded, under a pattern
that changed from pixel to pixel, which read as grain. The term now has its own
texture, drawn once for each pixel of the prepass, with a fixed 4 x 4 pattern, and
a 4 x 4 blur that keeps to each pixel's plane takes the pattern out without
crossing an edge. The lit pass reads the result. The prepass and the term share
their pipelines and draw walk.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:12:57 +00:00
CamWightandClaude Opus 5.5 9d7544929e Tests: the same language on every PC (#10297) (#10298)
Since #10183 the app follows the system's language, and the tests followed it too, so a test
naming an English word failed on a PC set to another language. CI's runners read as English
and never saw it. In tests the system's language is now English: `cfg!(test)` for this crate's
own tests, as the engine's folders do, and the harness for the tests outside it. The preference
stays `system`, and the app is unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:11:16 +00:00
github-actions[bot] af54b09bb1 Regenerate generated files and fold pending files [skip ci] 2026-11-02 01:51:55 +00:00
github-actions[bot] dcbca523a0 Regenerate generated files and fold pending files [skip ci] 2026-11-02 01:42:49 +00:00
froglemonade2andClaude Opus 5.5 e9b08f4af4 Control channel: report the dialog as data, the open tool windows, and what ui.start opened (#9087) (#10740)
* claim: #9087

* Control channel: report the dialog as data, the open windows, and what ui.start opened (#9087)

`ui.inspect.dialog` (and `ui.editFeature`'s reply) was the dialog's Rust Debug text, which
changed with every refactor and couldn't be parsed. It is now an object: the dialog's command,
title, the feature an edit rebuilds, its selection inputs, its error, and the commands OK runs
(or what it waits for). `hover` in `ui.inspect` and `ui.selection` is a selection-like item
instead of Debug text.

`ui.inspect` gains `windows`: the tool windows open beside the model (Parameters, Bill of
Materials, Design Properties, Sketch Report, material card review) by the command that opens
each, and the Help menu's (About, Updates, Shortcuts, Crash Reports, Report, Messages) by their
`ui.help` item. Before, an agent couldn't tell these windows were open.

`ui.start` and `ui.editFeature` reply with what they opened (tool, dialog, windows), the status
line, and `pending` when the start waits for the history and opens on a later frame.

Scenario `dialog` checks match words of the dialog's state from the app directly, so the
scenario files are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:08:48 +00:00
PapaEcho 666356dba0 Assistant: configurable show/hide shortcut (#10764) (#10767)
* claim: #10764

* Assistant: make show/hide shortcut configurable (#10764)
2026-11-02 00:08:23 +00:00
5c7e50cb67 Preferences redesign 2/11: shared widgets and painters in ui_kit (#9874) (#9890)
* claim: #9874

* Add shared Preferences cards, figure painters and gallery entries to ui_kit

* Preferences: Arabic, Hebrew and Vietnamese carousel labels

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Use the app's selection colours in the Preferences cards

* Measure Preferences figure inks and use shared palette metrics

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 21:58:35 +00:00
Colin Faulkingham b6aabb88ff Insert Design: place reused links from their parent origin (#10813) (#10825)
* claim: #10813

* fix: place reused linked designs from parent origin (#10813)
2026-11-01 21:47:53 +00:00
Kushagra Kumar 446590dca1 fix(engine): report design variant in timeline.inspect and accept in timeline.add (#10748) (#10792)
* fix(engine): report design variant in timeline.inspect and accept in timeline.add (#10748)

* ci: refresh checks to clear cancelled workflow run
2026-11-01 21:00:44 +00:00
Rec0iLandClaude Fable 5.1 52f0b52b45 Agent chat: a searchable model picker with a custom entry, listed from every provider, and OpenClaw and OpenRouter presets (#2582) (#10255)
* ui_kit: search_picker, a filtered dropdown with a custom entry

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: endpoints list their models with names, say when listing fails, and OpenClaw and OpenRouter presets (#2582)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: a typed model goes to endpoints and to agents that offer a model option

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: the header's model pickers search and take a custom model

The popup can't grow once it is open, so search_picker now fixes the height of what changes below
its box when it opens: the custom row or a late list could otherwise end up out of reach.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* AI preferences: pick an endpoint's model when adding it and on its card (#2582)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: model picker rows read from the left, and a refused typed model says which

From running it: list_picker centres its text, which reads badly for a long list of ids, and an
agent's own refusal can say no more than "Internal error". The search box also asks for a repaint
while it waits for the focus, so an idle window does not stop short of it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: docs for the model picker

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: an endpoint's answer that is no model list says so, an empty list too, and editing lists with the kept key

A 200 without a `data` array (a web page where the endpoint should be, as OpenClaw's gateway
serves until its chat endpoint is enabled) was cached as a successful, empty listing, so the
picker stayed blank with nothing to say and never asked again. Now it is an error with its own
note, an empty list says so, and both are asked for again the next time.

The Edit dialog lists its endpoint's models when it opens, with the kept key read from the
keychain on the listing's thread, as the card does; the key stays out of the field.

The method-not-found test expects the refusal notice that names the model, as every refused
model gets since this branch.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Agent chat: models from several providers fold under their providers inside the picker

As Chemiseblanc does in #10187: with two or more groups, `search_picker` draws each group as a
header with a chevron, the name and how many of its choices are listed, and a click folds or opens
it. Before anything is typed only the current value's group (and the one the caller asks for) is
open; a group with a match opens once something is typed; a fold made by hand stays until the popup
closes. Enter takes the first row shown, so never one folded away. A lone group keeps its plain
heading.

The header's model picker feeds its providers in as groups, so the separate provider drop-down
goes; the control channel's `provider` now says which group opens first. A header click gives the
focus back to the search box, so typing goes on filtering.

The dialog's listing test checks what kind of listing it got rather than translated words, which
the listing thread may render in another language than the test's.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Agent chat: rustfmt the provider groups

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Agent chat: an endpoint's models named `Vendor: Model` fold under their vendors

OpenRouter lists `openai/gpt-6.1-terra` as "OpenAI: GPT-6.1 Terra". A listing whose ids read
`vendor/model` and whose names read `Vendor: Model` now names its providers, so the picker folds
it under its vendors like a multi-provider agent; the rows read the model's name, and the id stays
in the tooltip and in the search. An agent's own `Provider: …` word still comes first. One vendor
is one flat list, as before.

The Add dialog's picker has no current model to prefer, so with nothing to prefer every group
starts open; folding is a click away.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 20:01:26 +00:00
github-actions[bot] 17b9a8e67f Regenerate generated files and fold pending files [skip ci] 2026-11-01 19:55:56 +00:00
github-actions[bot] 90c09eaaf9 Regenerate generated files and fold pending files [skip ci] 2026-11-01 19:48:16 +00:00
251573a5a4 MCP: compare the model with a reference picture (#1486) (#6416)
* claim: #1486

* Compare picture: overlap and edge offsets of the model against a reference picture (#1486)

inspect.compare_picture lays the model's silhouette over the part found in a
PNG or JPEG and slides it to the best overlap: overlap (0..1), the model's
edges against the picture's in mm at nine stations, and an overlay PNG. The
MCP tool compare_picture runs it and hands the overlay back as an image block.

inspect.silhouette grows a reusable silhouette::outline for the model side.

* chore: re-trigger checks (defaults line already present in PR body)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* i18n: carry the Compare Picture label in Arabic, Hebrew and Vietnamese too

The complete-catalog guard (every_complete_catalog_carries_every_english_message)
failed because the pending file covered only en/ja/zh; ar, he and vi are
complete catalogs and need the key as well.

* Compare picture: one uniform scale, capped fit, sturdier part finding

Review on #6416: fit no longer stretches the axes apart (width is the default,
both scales uniformly by width and reports aspect_mismatch); the fitted model
takes the same MAX_GRID cap as the picture; the border flood seeds only from
border pixels near the border's main colour, reads alpha, retries at a
stricter step, and says which case failed; the slide searches the whole
placement range instead of a tenth around the centre; the model's holes get
the picture's fill rule; crop becomes crop_px / crop_fraction with explicit
units. Pins #1486's bracket (overlap 0.865, bottom -10 mm at the upright) and
adds a regression test per problem.

* Compare picture: alpha only for a see-through border, part_fills_crop, outline-only wording

Review re-test on #6416: one translucent backdrop pixel no longer switches the read to
alpha — alpha decides only when most of the border is see-through, and any ink is then
part, so a part drawn at alpha 100 survives; part_fills_crop: true takes the crop box as
the part itself, for one view cropped tight off a board where the part takes most of the
border and the flood would keep the backdrop strip instead; a third backdrop pass compares
each pixel to the border's main colour, so a white part on (245, 245, 245) JPEG at quality
75 separates; the command, tool and docs descriptions now say the compare is outline only:
holes are not compared. A banded light backdrop stays a follow-up. A test per case.

* MCP compare: format the picture tests

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-01 18:30:18 +00:00
Nathan Dane bdce595fb3 Render results: retained renders, Live and render compare, render all shots (#6281) (#7375)
* Render results: keep up to eight completed renders and select or discard them

* Render results: Live and render compare with a divider, and render all shots

* fix: use comparison theme tint and reveal reset test targets

* fix: restore Unicode expectations in render workspace tests
2026-11-01 18:30:11 +00:00
brett19andClaude Opus 5.5 4afadeed59 Merge main 176c22aca into smlib
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
2026-11-01 11:15:21 -07:00
github-actions[bot] d135e1659c Regenerate generated files and fold pending files [skip ci] 2026-11-01 18:26:58 +00:00
Nathan Dane c454c05f88 Preferences redesign 1/11: design reference in docs (#9873) (#9889)
* claim: #9873

* Add the Preferences design reference: pages, figures, measurements, tokens

* Fix the selection look in the design reference to match the app
2026-11-01 18:02:24 +00:00
brett19andClaude Opus 5.5 180384fff4 Merge origin/main into smlib
Conflicts: Sketch Project keeps develop's exact pieces (a free-form edge as one spline) and
takes main's test for a spline that follows a circle, sampling every free-form piece; the
silhouette takes main's per-face facing, with develop's corner normals where a face has none;
the extrude dialog caches main's automatic operation over develop's fallible call.
world_state() is fallible on develop: main's new callers handle its error.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
2026-11-01 06:26:09 -07:00
a5a561caae Add Creo Parametric navigation preset (#3507) (#9322)
* claim: #3507

Co-authored-by: Codex <codex@openai.com>

* Add Creo Parametric navigation preset (#3507)

Add middle-button orbit, Shift+middle pan and Ctrl+middle vertical drag
zoom, with downward dragging zooming in. Keep the default navigation
preset and existing presets unchanged.

Refs #3507

Co-authored-by: Codex <codex@openai.com>

* Navigation: Creo preset needs the NX preset's reverse_drag_zoom field

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Codex <codex@openai.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 12:57:15 +00:00
github-actions[bot] 074cc758ee Regenerate generated files and fold pending files [skip ci] 2026-11-01 12:12:00 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 b557f22f97 Sketch: a construction/normal switch in the construction line tools (#10258) (#10551)
* Sketch: a construction line with a length can be a normal line (#10258)

`construction: false` on a construction line command that has a
`length` makes the segment a normal sketch line, ready to close a
profile, instead of construction geometry. The default stays
construction, and an infinite line is always construction.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a length box in the construction line tools (#10258)

The horizontal, vertical, parallel and perpendicular construction line
tools show a Length box beside the pointer from the start. It stays
empty (shown as infinite) and leaves the keyboard to the tool's
shortcuts until a digit is typed; then the box takes the keyboard.
Without a length the tools work as before: one click, an infinite line.
With a length the first click sets the start and a second click the side
the segment runs to, sent as the command's `length` and `near`, so the
segment gets its length dimension. The angle tool has a Length box
beside its Angle box. A typed length keeps the start's snap, and the
preview draws the segment the click will create.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a construction/normal switch in the construction line tools (#10258)

A Construction | Normal switch sits under the Length box of the
construction line tools. Normal sends `construction: false`, so a
segment with a length becomes a normal sketch line, ready to close a
profile, without converting it afterwards. The switch starts at
Construction with each start of a tool. An infinite line is always
construction, so without a length the switch is greyed out and its
tooltip says why. It belongs to the tool alone: the Sketch Palette's
drawing line type (X) is left as it is.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:15:21 +00:00
github-actions[bot] cda0277c3e Regenerate generated files and fold pending files [skip ci] 2026-11-01 08:49:46 +00:00
PapaEcho ce72abacf9 Construct: plane through an axis and a point (#10178) (#10472)
* claim: #10178

* feat: add plane through axis and point (#10178)
2026-11-01 09:15:25 +00:00
Leo 24b91bd453 Sketch Concentric: accept a circle or arc and a sketch point (#10487) 2026-11-01 07:57:43 +00:00
C.VengelsandClaude Opus 5.5 7bafc99390 Send to Slicer: the Print face input takes one face for each body sent (#10468)
With several bodies to send (after Add all bodies, say), the Print face
input refused every face. It took a print face only when exactly one
body was sent; any other pick was cleared at once, with a note in the
status bar only. Each body's print face then had to be set with Ctrl+B,
or by sending that body alone.

The input now holds the print face of each body being sent. A face
picked in it becomes its body's print face, in place of the one it had.
A click on a body's print face takes it out and clears only that body's.
A face of a body that is not being sent is refused with a message
(`ui.print_face_body_not_sent`, in place of `ui.print_face_one_body`).
Each change is still one `body.print_face` command, so it undoes on its
own. Picks in this window are no longer widened to the other pieces of
the face's surface, so a click on a print face takes it out rather than
adding its neighbours.

The user guide (guide/files.md) says so. The new message is in
assets/locales/pending/print-face-each-body.json, in all 31 languages;
the old one is removed from the catalogs.

Test: dialogs_save_mesh::tests::the_print_face_input_takes_one_face_for_each_body_sent
(fails without the change: the second body's face is refused).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:44:15 +00:00
brett19andClaude Opus 5.5 012ed93b17 Merge origin/main into smlib
Main's retried-boolean saved-model test stays out, as develop has no boolean retries.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 21:50:11 -07:00
9d01f6e005 Sketch: construction lines with a length (#10258) (#10427)
* claim: #10258

* Sketch: construction lines with a length (#10258)

The horizontal, vertical, angle, parallel and perpendicular construction
line commands take an optional `length`: the line becomes a construction
segment from `at`, running towards `near`, held by a length dimension
that follows its expression. Without `length` the line stays infinite,
as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 04:13:03 +00:00
brett19andClaude Opus 5.5 7d760a923a Merge origin/main into smlib
Main's open flow keeps the session's check mode: a saved model under another mode is evaluated again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 20:05:06 -07:00
acebear17 9475e0e1a4 Docs/design approach 10063 (#10409)
* claim: #10063

* docs: add a design approach and workflows chapter to the user guide (#10063)

Adds guide/design-approach.md after the window tour: the parametric idea, principles for designs that change well, the timeline and rollback marker, bodies vs components and occurrences, common workflows with links, a term map for users of other CAD software, and where to find help.

* docs: match the chapter to the app's labels and sketch colours (#10063)

Checked in the web app (0.29.0): the timeline strip is headed History, the toolbar shows New Sketch and Parameters for Create Sketch and Change Parameters, and fully constrained geometry turns white in the default dark theme rather than dark.

* docs: tighten the design approach chapter's wording (#10063)

The glossary covers most, not all, of the chapter's terms; Redo moves forward; the timeline is shown as the History strip; Report a bug drafts a report for the user to file and sends nothing itself.
2026-11-01 02:27:40 +00:00
Nathan Dane 7366fe0ecc Blur behind panels: render path, zero cost when off (#8876) (#9809)
* claim: #8876

* Add optional viewport-only Kawase blur and native UI composition

* Fix vendored panel hook imports and deprecated float constant import

* Drain texture updates in the full GPU blur fixture

* Hold the blur evidence fixture camera fixed across radii

* Address blur compositor lint checks

* Share animated Render preview background with blur source

* Use resolved Design background for blur source

* Exercise blur rendering independently of software adapter policy in CI

* Use stock egui hosts instead of vendoring the full crate

* Preserve feature-window open handling with stock egui hosts

* Target the native Window in close-handling regression fixture
2026-11-01 01:37:44 +00:00